Modine IHR9047 90,000 BTU High Intensity Infrared Gas Fired Heater Product Brochure
advertisement
FEATURES AND BENEFITS - MODEL IHR
Figure 4.1 - Construction Features - Model IHR
Features
1. High temperature cordierite-based grooved ceramic tiles with perforations along both the top and bottom of the grooves
2. Polished aluminum reflectors
3. 16 gauge aluminized steel frame
4. No air mover is utilized
5. Input ranges from 30,000 Btu/hr through 160,000 Btu/hr in Natural or Propane gas
6. Direct spark or self-energizing standing pilot ignition
7. 115V, 25V, or millivolt controls
8. Externally-mounted controls
9. Burners are replaced by removing one fastener
10. CSA design certification for indoor, unvented operation in commercial and industrial installations
Benefits
1. Increased temperature and surface area to provide maximum heat transfer while maintaining lower gas input ratings.
2. Efficiently direct radiant heat to the desired area, for increased comfort over wider areas.
3. Provides support for simple chain mounting.
4. Eliminates fan noise, drafts, maintenance and reduces electrical energy costs.
5. Wide input range to accommodate a variety of heating requirements
6. Maximize application flexibility.
7. Accommodate a wide range of electrical inputs.
8. Allow convenient access to gas valve, control system, transformer, and gas orifices, increasing ease of installation and service.
9. Eliminates the removal of the unit from its mounted position for service.
10. Assures that the unit conforms to national safety standards.
9-123.2
5
advertisement
Related manuals
advertisement