JONATHAN Y JYL9045A Coco 27.5 in. Gold/White Fringed/Metal LED Table Lamp Instructions / Assembly

WARNING

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation

*The external flexible cable or cord of this lamp cannot be replaced;

If the cord is damaged, the lamp shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

A

Cap

1X E Socket Assembly

1X

Model# JYL9045A

Product Dimensions: Ø15.75" X 27"H

B

Shade

1X F

Long Tube 1X

C Short Tube 1X

G

Base

1X

D Bulb

2X

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 6 minutes.

PLEASUE USE TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT

THERE ARE 2 X 4W LED BULBS IN THE BOX.

1 2

3

C

A

B

E

C

F

D

G

Step 1 Step 2 Step 3

Make sure all parts could be aligned before assemble

Do not rotate lamp body too hard avoid base screw broken

Insert the bottom nipple of the Shade(B) into the

Short Tube(C) and rotate it till tight.

Insert the bulb(D) into the socket.

Put the light on a level surface to check

Insert the Long Tube(F) into the Base(G) and rotate it till tight. Place the Cap(A) onto the Shade(B) and rotate it if everything is stable.

clockwise till tight.

Insert the Socket Assembly (E) into the Long Tube(F).

Insert the Short Tube(C) into the Socket Assembly (E) and rotate it till tight.

Be careful not to twist the power cord and tighten securely

ENJOY YOUR LAMP