Hillsdale Furniture 4903-830HJ Installation guide

Hillsdale Furniture 4903-830HJ Installation guide
a CIERRA METAL SWIVEL STOOL 9
HILLSDALE Model #100720-117704 (4592-824HJ) Swivel Counter Stool 9
FURNITURE Model #100720-117705 (4592-830HJ) Swivel Bar Stool ©
а
Model #100720-117703 (4592-837HJ) Swivel Bar Stool
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure
that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult
assembly required. Online Parts Request: [email protected] - Customer Service Phone Number: 502-562-0000
HARDWARE LIST PARTS LIST ==)
A (8) Short Allen Bolts ~~ H (1) Stool Back
B (4) Medium Allen Bolts J (1) Stool Base A B C G
C (2) Long Allen Bolts 1) Seat Base
K (
D (4) Counter Sunk Bolts L (1) Inner Ring |
E (6) Spring Washers M (4) Legs Om
F (6) Metal Washers D E F
G (1
) Allen Wrench
STEP 1
Begin assembly by attaching each Leg (M) to Stool
Base (J), from the bottom side, using 2 Short Bolts
(A) per each leg. Only hand tighten bolts for this step.
H See figure at the left.
STEP 2
Next, attach Stool Back (H) to
Seat Base (K), using 2 Long
Allen Bolts (C), 2 Spring
Washers (E) & 2 Metal Washers
(F) per each side. Only hand
tighten bolts for this step. See
figure at the left.
STEP 3
Attach Seat Base (K) to Stool
Base (J), using 4 Medium Allen
Bolts (B), 4 Spring Washers (E)
& 4 Metal Washers (F) from the
; bottom side. Only hand tighten
2 A J bolts for this step. See figure at
the left.
STEP 4
Attach Lower Ring (L)
to each Leg (M), using
B 1 Counter Sunk Bolt
-1--0- 0-0 (D) per each leg.
Once each leg is in
place, Tighten all bolts
from Steps 1 through
4. See Figure at the
M left. The assembly is
now complete.
DA
<
<
(El
Ti
m
<
am
Ca
Ca”
<
U
(
| |
CARE & MAINTENANCE: The touch of a soft cloth is all the maintenance the finish will ever need.
Please do not use harsh or abrasive cleaners for polishing, as they may cause damage to the finish. Periodic
checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement