Commercial Electric 216 8C, B2168C002 User guide
Item #226 542 227 037 Model #XXXXXX Use and Care Guide Network Wall Plate Installation 1. Remove the old wall plate from the wall outlet box. 2. If necessary, trim the cable jacket back about 2 in., being careful not to nick any wires inside. 3. If necessary, strip about ½ in. of insulation off each wire. 4. listed in the chart Sbelow. Note that most residential networks use the T-568B Standard. 5. Attach the wall plate to the wall using the two screws located on the back of the wall plate. Pin Wall Plate Color Terminal T-568B Standard T-568A Standard 1 Blue White/Orange White/Green 2 Orange Orange Green 3 Black White/Green White/Orange 4 Red Blue Blue 5 Green White/Blue White/Blue 6 Yellow Green Orange 7 Brown White/Brown White/Brown 8 White Brown Brown HOMEDEPOT.COM Please contact 1-877-527-0313 for further assistance.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project