SPC-250 instructions 1. Thread the 1-1/2 in. check valve into the discharge of your pump. 2. Slide 1-1/4 in. flexible hose on top of the check valve and tighten a hose clamp to ensure there are no leaks. o For permanent installation, using PVC Cement attach a 1-1/2 in. PVC slip coupler to the top of the check valve. Attach the 1-1/2 in. PVC discharge pipe to the PVC slip coupler. Allow for proper curing time as suggested by the PVC Cement manufacturer. - Note: use Teflon tape on all threaded connections to prevent leaks.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project