Marks USA Brass Entry Knob Instructions

 365 Bayview Ave., Amityville, NY 11701
7) A R ыы S LJ <=) ДА 691-225-5400 + 1-800-526-0233 » Fax 631-225-6136 * www. marksusa.com
1-3/4" | 2-3/4" BACKSET 2-1/2" BACKSET | 1-3/4"
> => > =
: SERIES 71 (Thru-bolt Holes SERIES 91 (Thru-bolt Holes :
; Not Required) Not Required) ;
STRIKE SERIES 7NY SERIES 114 STAN
LIP ' ' LIP
POSITION 7 ÓN mess (7 У POSIT
\_ rr CYLINDER HOLE Ne, | |
' |" 1-114" DIAMETER tf
' Drill only if cylinder ‘
= 1" e is on this side «фен |" ар»
DRILL ; ALIGN TEMPLATE WITH TURNPIECE HOLE : DRILL
3/4" 1 ı 3/4"
—I— | «—— 7/8"DIAMETER | |
DEEP VERTICAL AND HORIZONTAL овом Йоко | DEEP
ocket Clearance 1. Insert lock ‘ CENTER LINES ON DOOR is on this side : 1. Insert lock
'8" Deep For 2. Mark outine ; : 2. Mark outline
ati Friction SA FOR OPPOSITE DOOR : of lock fron
ich, One Sid ; 3. Mortise 1
La | TURN TEMPLATE OVER | ma
equired ne ALTERNATE KNOB/ h thickness
| THRU-BOLT HOLE
C 2" DIAMETER THRU |
THRU-BOLT HOLE HORIZONTAL |
— CENTER LINE +
1/2” DIAMETER THRU 7/18" DIAMETER : OF KNOB
NOB HEIGHT MD | ] — oil : О X
30VE FLOOR J ;
VERTICAL CENTER LINE OF BACKSET ]
VERTICAL CENTER LINE | VERTICAL CENTER LINE
OF LOCK OF LOCK vamoiate T-114 11.11
©2011, MARKS USA