Roof Zone 13825 21.5 in. Shingle Remover Instructions

Roof Zone 13825 21.5 in. Shingle Remover Instructions
Professional Shingle Remover 21-1/2”
Model 13825
Shingle Remover with 21-1/2” long handle. For use on very steep
roofs or hard to reach areas. May be used for the removal of
siding and flashing. Ergonomic, rugged steel tear-off tool for the
removal of composition roof shingles. Teeth are heat tempered.
Do not use for other than the intended purpose.
WARNING: Always use safety glasses. Product must be used in
strict compliance with Local, State, and Federal OSHA regulations.
Avoid electrical cords. Do not throw tool from roof top.
Roofing Products Division
605 Stonehill Drive SW
Atlanta, Georgia 30336
800-241-1806 • 404-344-0000
ISO 9001:2015 Certification
Intellectual property of TIE DOWN Inc.
©2018 TIE DOWN, Inc.
E1666 Rev. 8/19/19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF