GE PP7030DJBB Profile 30 in. Radiant Electric Cooktop in Black with 5 Elements with Rapid Boil Specification

GE PP7030DJBB Profile 30 in. Radiant Electric Cooktop in Black with 5 Elements with Rapid Boil Specification
PP7030DJ
GE Profile™ Series 30" Built-In Knob-Control ElectricCP9530SJ,
CooktopPP9030DJ, JP7030DJ,
JP5030DJ
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
IMPORTANT: Requires a 5" free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires a 15"
minimum from cooktop to adjacent overhead
cabinets. Units are furnished with a 48" flexible
armored cable.
APPROXIMATE COOKING DIMENSIONS
20-7/8"
29-3/4"
3-1/4" at front of unit and
5-9/16" at conduit location
13" MAX. depth of unprotected
overhead cabinets (when no
hood or microwave is installed)
Cooktop
19-1/4"
28"
19-5/8" to
NOTE: 30" Ribbon cooktops are approved for use
19-3/4"
30" MIN. from countertop to
unprotected cabinet (when
over select GE 27" and GE 30" Single Wall Ovens
no hood or microwave is
28-1/2" to
installed)
1-3/4"
MIN.
and Warming Drawers. Refer to cooktop and wall
28-5/8"
to rear wall
oven/warming drawer installation instructions
packed with product for current dimensional
data. If installed with a GE Telescopic Downdraft
2-1/2" MIN.
Required
System, consult both the cooktop and downdraft
Electrical junction box 16" MIN.
installation instructions packed with product
below countertop
before installing. Cooktop gas/electric supply
2" MIN. clearance
to side wall from cut-out
To insure accuracy, it is best to make a
may need to be re-routed to install downdraft.
on left sides of unit and
template when cutting the opening in the counter
1-1/2" clearance on
The countertop cutout requires 23-1/2" minimum
right side of unit
flat countertop surface and 25" minimum total
countertop depth. In addition, other clearances
INSTALLATION
ABOVE
A WALL
OVEN
INSTALLATION
ABOVE
A WALL
OVEN
to front edge of the countertop must be
2-1/2" MIN
From front edge
of countertop to front
considered. Before installing, consult installation
edge of cooktop cutout
instructions packed with product for ­current
dimensional data.
VOLTAGE (60HZ AC)
CUTOUT FILLER TRIM KIT: A filler trim kit
is available for use if your countertop cutout is
larger than the dimension shown, up to 29-13/16" x
20-7/16". Order JXTR32B for black or JXTR32W
for white, to reduce the cutout opening for
installation of this cooktop. These kits may be
ordered from your GE Appliances Dealer.
31-1/4" MIN
From top surface
of countertop to
top surface of
wall oven support
platform
15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop
240V
208V
CONNECTED LOAD (MAX.)
9.5kW
7.1kW
CURRENT DRAW (MAX.)
39.6 Amps
34.3 Amps
40 Amps
40 Amps
RECOMMENDED CIRCUIT BREAKER
†
†
NOTE: Check local codes for required breaker size.
ADA
COMPLIANT
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
Listed by
Underwriters
Laboratories
Specification Revised 1/19
PP7030DJ
GE Profile™ Series 30" Built-In Knob-Control Electric Cooktop
FEATURES AND BENEFITS
Five radiant cooking elements – Cook foods quickly and evenly
on this sleek, glass surface
"/9" Power Boil element – Use different pan sizes on this single,
6
3,100-watt flexible element that produces rapid powerful heat
5"/8" dual element – Use different pan sizes on this single, 2,200-watt
flexible element
SyncBurners – Control two 7" elements simultaneously to evenly
heat large cookware or griddles*
eep Warm setting – Keep food warm with GE Appliances' lowest
K
heat setting or boil water in minutes with this fully functional
6" element
Melt setting – Gently melt delicate foods without burning
or scorching
PP7030EJES
Control lock capability – Protects against unintended activation
Red LED backlit knobs with black glass surface – Achieve
a modern look with the convenience of knob controls
ot surface indicator lights – Know when elements are too
H
hot to touch with a quick glance
*OPTIONAL STAINLESS STEEL CLAD
ALUMINUM GRIDDLE
Achieve even results with this lightweight griddle,
tailored to fit GE SyncBurners. Order part number
JXGRIDL1 from your GE Dealer.
ooktop “On” indicator light – A light lets you know when
C
an element is active
Model PP7030DJBB – Black on black
GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another brand?
GE cooktops are guaranteed for an exact fit or GE Appliances will
pay up to $100 toward modifications
Visit geappliances.com for more info
Specification Revised 1/19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement