TECHNICAL DATA Trinsic ® TOILET PAPER HOLDER 2-1/4" 57 mm 3-1/3" 84.2 mm 7" 178.5 mm MATERIALS: Post - Zinc die cast Bar - Zinc die cast INSTALLATION: Mount wall plate bracket(s) per installation instructions with supplied fasteners. Slip product over wall plate(s) and tighten set screws until secure. OPTIONAL FASTENER INFORMATION: Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the following fasteners are suggested: Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts. SPECIFICATION: Surface mounted toilet paper holder shall be model _____________________________ (fill in model number) by Liberty Hardware Manufacturing Corporation.