XWH Series Installation www.ifilters.com
Connect your IN line using a flex pipe
(recommended)
Pre-Filter
Connect the OUT line using a flex pipe
(recommended) to your home.
Main Unit
1) Ensure ground is leveled and the system has 2-3 feet of clearance.
2) Mounting the Pre-filter to the wall is optional but might be required if using flex lines. A block of wood might be required to extend the back of the pre-filter bracket to the wall.
3) Flush the main unit for 10-15 minutes before installing the OUT port to your home/business. Using a hose is recommended to avoid water damage in an in-home installation. Simply connect a hose to the OUT port of the main unit and run the hose to a grass or planter area.
4) Once the system is flushed, simply connect a Flex Line (not included) from the OUT port of the unit to the IN pipe of your home or business.
5) Installing a shutoff valve and a bypass valve is recommend for servicing.
6) Installing a ground jumper cable is also recommended to comply with local electrical laws.
*Install this system according to your local laws. It is highly recommended to have this unit installed by a license professional.