DPI DECORATIVE PANELS INTERNATIONAL HD18132481 10.67 sq. ft. 1/8 in. x 48 in. x 32 in. Laramie Oak Wainscot Hardboard Panel Installation Guide

DPI DECORATIVE PANELS INTERNATIONAL HD18132481 10.67 sq. ft. 1/8 in. x 48 in. x 32 in. Laramie Oak Wainscot Hardboard Panel Installation Guide
Thank you for choosing our panels...
- Bring out your creativity
« Dramatically change your walls |
* All you need is simple tools f
-How to install DPI panels:
1/8” thickness)- Stand panels around the room where they will be installed
Allow air to circulate around front & back of panels
24 hrs. above grade / 48 hrs. below grade
Apply panels to a smooth, solid surface, (ie: drywall)
On exterior walls use a vapor barrier
4-mil (or greater) visqueen is typical
Measure & cut panels to size - (measure twice, cut once)
If installing multiple panels, leave a gap between them
A dime’s width will allow for seasonal expansion
Trowel on construction adhesive (i.e: Loctite PowerGrab)
Use 1/8” V-notched trowel to coat back of panel
Wait for adhesive to set up, but still be tacky
Trim molding may be used for a finished look, if desired
Apply panel to wall, position as needed, press into place
Repress panel every few minutes until adhesive sets up
Clean panels with a dry or damp cloth - no abrasives
Marker board - use appropriate dry-erase markers, and
clean panel with compatible eraser or dry erase cleaner
* for more information go to www.decpanels.com AY DECORATIVE PANELS
INTERNATIONAL.
An American Standard Brands Company
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement