StyleWell 18-927-175-Y Albury 31 in. Freestanding Compact Infrared Electric Fireplace Use and care guide

Add to my manuals
30 Pages

advertisement

StyleWell 18-927-175-Y Albury 31 in. Freestanding Compact Infrared Electric Fireplace Use and care guide | Manualzz

Item #1004191548, 1004151168,

1004151169, 1004151171

Model #18-927-93, 18-927-93-Y,

18-927-204-Y, 18-927-175-Y

USE AND CARE GUIDE

COMPACT INFRARED FIREPLACE

20-10-401

Questions, problems, missing parts?

Before returning to the store, call Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

1-877-527-0313

HOMEDEPOT.COM

THANK YOU

We appreciate the trust and confidence you have placed in StyleWell through the purchase of this electric fireplace. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing StyleWell!

Table of Contents

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Pre-Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Planning Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Hardware Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

IMPORTANT: Read all instructions and warnings carefully before starting installation.

Failure to follow these instructions may result in a possible electric shock, injury to persons, fire hazard and will void the warranty.

Please read the Installation & Operating Instructions before using this appliance.

CAUTION

PRODUCT DAMAGE MAY OCCUR.

Never attempt to disassemble or alter the product in any way not instructed by this manual.

1

Safety Information

Please read and understand this entire manual before attempting to assemble, operate or install the product.

□ Read all instructions before using this appliance.

□ This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this appliance. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 ft. (914 mm) from the front of this appliance and keep them away from the sides and rear.

CAUTION: Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating unattended.

□ If possible, always unplug this appliance when not in use.

□ Do not operate any heater with a damaged cord or plug or after the appliance malfunctions, has been dropped or damaged in any manner.

□ Any repairs to this appliance should be carried out by a qualified service person.

□ Under no circumstances should this appliance be modified. Parts having to be removed for servicing must be replaced prior to operating this appliance again.

□ Do not use outdoors.

□ This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never place this appliance where it may fall into a bathtub or other water container.

□ Do not run the cord under carpeting. Do not cover the cord with throw rugs, runners or the like. Arrange the cord away from traffic areas and where it will not be tripped over.

□ To disconnect this appliance, turn the controls to the off position, then remove the plug from the outlet.

□ Connect to properly grounded outlets only.

□ This appliance, when installed, must be electrically grounded in accordance with local codes, with the current CSA C22.1 Canadian

Electrical codes or for USA installations, follow local codes and the National Electric Code, ANSI/NFPA No. 70.

□ Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire, or damage to the appliance.

□ To prevent possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.

□ This appliance has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored. This appliance should not be used as a drying rack for clothing, nor should Christmas stockings or decorations be hung on or near it.

□ Use this appliance only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.

□ Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip) because of the risk of overheating the cord and the risk of fire. Extension cords are for temporary use only. If an extension cord must be used, it must be UL/CSA certified, rated at 15A (1,875W), 125V maximum with 14 AWG minimum and constructed of two current carrying conductors with ground. A heavy duty extension cord with the shortest length possible for the connection is recommended and must not be longer than 50 ft. (15.2 m). Do not coil or cover the extension cord.

□ “SAVE THESE INSTRUCTIONS FOR FUTURE USE”

2 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Warranty

1-YEAR WARRANTY

WHAT IS COVERED

The manufacturer warrants that your new electric fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations.

Variations in actual wood color and finishes which may result from natural characteristics of the wood, such as grain patterns, mineral streaks and the like, are not considered defects. As wood continues to move and age you may notice these slight differences in color, even on different parts of any individual unit. Sound knots and slight surface cracks are the true personality of a quality piece of wood furniture.

This electric fireplace must be installed and operated at all times in accordance with the instructions furnished with the product. Any alteration, willful abuse, accident, or misuse of the product shall nullify this warranty. This warranty is non-transferrable, and is made to the original owner, provided that the purchase was made through an authorized supplier of the manufacturer. This warranty is limited to the repair or replacement of part(s) found to be defective in material or workmanship, provided that such part(s) have been subjected to normal conditions of use and service, after said defect is confirmed by the manufacturer’s inspection. The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by refunding the wholesale price of the defective part(s).

WHAT IS NOT COVERED

Any installation, labor, construction, transportation, or other related costs/expenses arising from defective part(s), repair, replacement, or otherwise of same, will not be covered by this warranty, nor shall the manufacturer assume responsibility for same. Further, the manufacturer will not be responsible for any incidental, indirect, or consequential damages, except as provided by law.

All other warranties - expressed or implied - with respect to the product, its components and accessories, or any obligations/liabilities on the part of the manufacturer are hereby expressly excluded. The manufacturer neither assumes, nor authorizes any third party to assume, on its behalf, any other liabilities with respect to the sale of this product. The warranties as outlined within this document do not apply to nonmanufacturer accessories used in conjunction with the installation of this product.

This warranty does not cover the lightbulb(s) included with the fireplace.

This warranty is void if: the fireplace has been operated in atmospheres contaminated by chlorine, fluorine, or other damaging chemicals; the fireplace is subjected to prolonged periods of dampness or condensation; the fireplace is altered, willfully abused, damaged by accident, or misused in any way.

If warranty service is needed, call StyleWell Customer Service 1-877-527-0313.

8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday.

Make sure you have your warranty, your sales receipt, and the model/serial number of your product.

DO NOT ATTEMPT TO DO ANY SERVICE WORK YOURSELF.

3

Pre-Assembly

PLANNING ASSEMBLY

To avoid scratching the finish, assemble the product on a soft, non-abrasive surface, such as carpet or cardboard.

Assembly of this product may require more than one person.

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

AA

Part Description

AA Bolt

BB Dowel

CC Back Panel Screw

DD Connector

EE Anti-tip Device

FF Screwdriver

BB

Quantity

32 + 2 extra

16 + 1 extra

10 + 2 extra

5

1

1

CC DD EE FF

4 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Pre-Assembly (continued)

PACKAGE CONTENTS

D

E

F

Part

A

B

C

Description

Top Panel

Base Panel

Media Shelf

Back Panel

Upper Side Panel

Base Trim

Quantity

1

1

1

1

2

1

5

K

L

M

Part Description

G Support Panel

H

J

Left Side Panel

Right Side Panel

Left Trim

Right Trim

Top Trim

Quantity

2

1

1

1

1

1

Assembly

1

Attaching connectors

□ Locate the left trim (K), right trim (L), top trim (M), and base trim (F) and place on soft surface to protect the finish.

□ Attach five connectors (DD ) to left trim (K), right trim (L),

top trim (M), and base trim (F) by turning the five bolts

(AA) clockwise through the connector. Do not strip the bolts (AA) by overtightening.

AA

DD

K

L

F

2

Attaching the trim to side panels

□ Locate the left side panel (H) and right side panel (J) and place on soft surface to protect the finish.

□ Attach the left trim (K) and right trim (L) to the side panels (H & J) (by turning the bolts (AA) clockwise through the connector. Do not strip the bolts (AA) by overtightening.

AA

L

M

K

H

J

6 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

3

Attaching the base trim to base panel

□ Locate the base panel (B) and place on a soft surface to protect the finish.

□ Attach the base trim (F) to the base panel (B) by turning four bolts (AA) clockwise through the connectors. Do not trip the bolt (AA) but overtightening.

□ Attach the two support panels (G) to the base panel (B) turning four bolts (AA) clockwise through the connector. Do not strip the bolts (AA) by overtightening.

AA

F

G

G

B

4

Attaching top trim to side panels

□ Insert four wood dowels (BB) into the unthreaded holes in the top trim (M)

□ Line up the four wood dowels (BB) in the top trim (M) with the unthreaded holes in the left and right side panel

(J & H).

□ Press together firmly until flush.

J

M

BB

H

7

Assembly (continued)

5

Attaching side panels to base

□ Insert four wood dowels (BB) into the unthreaded holes in the base (B).

□ Line up the four wood dowels (BB) in the base (B) with the unthreaded holes in the left and right side panels.

□ Press left and right side panels down until flush.

□ Insert four bolts (AA) into the connectors on the side panels and turn clockwise. Do not strip the bolts (AA) by overtightening.

AA

J

BB

B

H

6

Attaching the media shelf

□ Line up the connectors on the side panels (J & H) with holes on the media shelf (C).

□ Attach the media shelf to the base assembly by inserting seven bolts (AA) through the connector in the side panels and turning clockwise. Do not strip the bolts (AA) by overtightening.

8 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

7

Attaching front and side panels to media shelf

□ Insert four wood dowels (BB) into the unthreaded holes in the media shelf (C).

□ Line up the four wood dowels (BB) in the media shelf with the unthreaded holes in the upper side panel (E).

□ Press together firmly until flush.

□ Insert four bolts (AA) into the connector on the upper side panels (E).

□ Attach the upper side panels (E) to the media shelf (C) by turning the bolts (AA) clockwise. Do not strip the bolts

(AA) by overtightening.

8

Attaching top panel to assembly

□ Locate the top panel (A) and place on a soft surface to protect the finish.

□ Insert four wood dowels (BB) into the unthreaded holes in the side panels.

□ Line up the four wood dowels (BB) in the side panels with the unthreaded holes in the top panel (A).

□ Press together firmly until flush.

□ Insert four bolts (AA) into the connector on the upper side panels.

Attach the upper side panels to the top panel (A) by turning the bolts (AA) clockwise with screw drive (FF).

Do not strip the bolts (AA) by overtightening.

9

Assembly (continued)

9

Attaching the back panels

□ Locate the back panel (D) and line them up to the back of the media console with the finished side facing in.

□ Insert and tighten ten back panel screws (CC) to attach the back panel (D) the media console.

□ Do not strip the screws (CC) by overtightening.

10

Installing the firebox

□ Insert the firebox into the media console through the back opening.

□ Push the firebox forward through the back opening until the metal trim of the firebox in flush with the side panels (J & H).

□ Once the firebox is in position attach the two mounting brackets included with the firebox by inserting and tightening six screws through the mounting brackets into the media console.

Do not strip the screws by overtightening.

CC

D

10 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

11

Anti-tip Device Installation

DANGER: This product is only a deterrent. It is not a substitute for proper adult supervision.

□ Install the Anti-tip Device according to the installation instruction.

EE

Wall

WARNING: You must install the tipping restraint hardware to help revent any accidents or damage to the unit.

We strongly recommend mounting this hardware to a wall stud and your unit.

Care & Cleaning

□ Always turn the heater OFF and unplug the power cord from the outlet before cleaning.

□ Cleaning of the control panel, located in the upper right-hand corner of the fireplace behind the sliding control panel cover, is to be done only using a soft cloth, slightly dampened in water (if needed, a small amount of dish soap can be added to the water) and dried using a clean, dry soft cloth. Cleaning of the screen diffuser is to be done using only water and lint free cloth. DO NOT use any abrasive cleaners on the diffusing screen.

11

Service Parts

Part

G

H

E

F

J

C

D

A

B

K

L

M

Description

Top Panel

Base Panel

Media Shelf

Back Panel

Upper Side Panel

Base Trim

Support Panel

Left Side Panel

Right Side Panel

Left Trim

Right Trim

Top Trim

Hardware Pack

Manual

Quantity

2

1

2

1

1

1

1

1

1

1

1

1

1

1

Part Number

18-927-175-Y

Aged Black Finish

20-02-013

20-02-014

20-02-015

20-02-016

20-02-017

20-02-018

20-02-019

20-02-020

20-02-021

20-02-022

20-02-023

20-02-024

Part Number

18-927-93 / 18-927-93-Y

Cherry Finish

20-02-001

20-02-002

20-02-003

20-02-004

20-02-005

20-02-006

20-02-007

20-02-008

20-02-009

20-02-010

20-02-011

20-02-012

20-09-701

20-10-401

Part Number

18-927-204-Y

White Finish

20-02-025

20-02-026

20-02-027

20-02-028

20-02-029

20-02-030

20-02-031

20-02-032

20-02-033

20-02-034

20-02-035

20-02-036

12 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Troubleshooting

If you have any questions regarding the product, please call StyleWell Customer Service, 1-877-527-0313, 8 a.m. - 7 p.m., EST, Monday -

Friday, 9 a.m. - 6 p.m., EST, Saturday.

Problem

Display shows”E1”

The heater is not operating.

Heater does not blow warm air.

There is no power and the logs do not glow.

The logs glow, but there is no effect.

The heater does not blow warm air.

The heater is producing a burning smell.

Possible Cause

The thermostat sensor is broken or disconnected.

Manual reset overheat protection has triggered.

The heater is in a cool down cycle.

There is no power to the unit.

The flame effect turned off.

Thermostat setting is preventing the heater from turning on.

Dust has accumulated on the heating coil during the manufacturing process. It will quickly dissipate and should not occur again.

Check & ensure there are no combustible materials within 0.9 meters (3 feet) surrounding the heater.

Ensure a minimum clearance of 2.42 inches (6.15 cm) from both sides and rear of heater to adjacent walls.

Solution

Unplug the fireplace, remove the panel assembly of the fireplace and check that the thermostat is plugged into the main circuit board. If this does not solve the problem contact customer service for a replacement thermostat sensor.

Inspect the heater and check that the air inlets and outlets are not blocked as this may cause overheating. Unplug the heater for 30 minutes and allow it to cool down. Replug and operate. Monitor the heater for signs of overheating. If the problem persists discontinue use of the heater and contact customer service.

Normal operation will continue to run for several minutes before shutting down.

Times will vary based on temperatures.

During this time cool air will blow.

Check that the unit is plugged into a standard 120V outlet. Press the Power button several times and make sure power is set to the “ON” position.

Press the Flame button several times.

Adjust the temperature settings to ensure that the thermostat is set higher than the current room temperature.

Ensure room in which heater is situated is well ventilated.

Remove any combustible items from the heater.

Reposition the heater so there is enough space around the heater to the adjacent walls.

13

Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

1-877-527-0313

HOMEDEPOT.COM

Retain this manual for future use.

Manufactured by: GHP Group, Inc. • 6440 W. Howard St. • Niles, IL 60714-3302

Artículo #1004191548, 1004151168,

1004151169, 1004151171

Modelo #18-927-93, 18-927-93-Y,

18-927-204-Y, 18-927-175-Y

GUÍA DE USO Y MANTENIMIENTO

CHIMENEA POR INFRARROJOS COMPACTA

Antes de empezar

PARA UN

ENSAMBLE RÁPIDO

DE ESTE PRODUCTO, BUSQUE

LAS INSTRUCCIONES 3D EN

DESCARGUE

EL APP GRATIS

¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de StyleWell de lunes a viernes entre

8 a.m. y 7 p.m., (hora del Este de E.E. U.U.), Sábado entre 9 a.m. y 6 p.m., (hora del Este de E.E. U.U.)

1-877-527-0313

HOMEDEPOT.COM

Apreciamos la confianza que ha depositado en StyleWell por la compra de esta chimenea eléctrica. Nos esforzamos por crear continuamente productos de calidad diseñados para mejorar su hogar. Visítenos en internet para ver nuestra línea completa de productos disponibles para sus necesidades de mejorar su hogar. ¡Gracias por elegir a StyleWell!

Índice

Tabla de contenido . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Información de Seguridad . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Garantía . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Pre-ensamblaje . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Planificación del ensamblaje . . . . . . . . . . . . . . . . . . . . . . . . 19

Piezas incluidas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Contenido del paquete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Ensamblaje . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Cuidado y limpieza . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Piezas de servicio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Resolución de fallas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

IMPORTANTE: Lee todas las instrucciones y advertencias antes de comenzar la Instalación. No seguir estas instrucciones puede resultar en una posible descarga eléctrica, lesiones a las personas, riesgo de incendio y anulará la garantía.

Por favor lee las Instrucciones de Instalación y Funcionamiento antes de usar este electrodoméstico.

PRECAUCIÓN

PUEDE OCURRIR DAÑO DEL PRODUCTO.

Nunca intentes desensamblar o modificar el producto de ninguna forma que no se indique en este manual.

16 HOMEDEPOT.COM

Por favor, llame al 1-877-527-0313 para obtener más ayuda.

Información de Seguridad

Por favor lee este manual antes de instalar y usar este electrodoméstico.

□ Lea todas las instrucciones antes de usar este electrodoméstico.

□ Este electrodoméstico se calienta cuando está en uso. Para evitar quemaduras, no toques las partes calientes con la piel descubierta.

Al moverlo, sujeta este electrodoméstico por las asas, si las tiene. Mantén los materiales inflamables, como muebles, almohadas, ropa de cama, papeles, ropa y cortinas al menos a 92 cm de distancia de la parte frontal de este electrodoméstico.

PRECAUCIÓN: Precauciones extremas son necesarias cuando cualquier calefactor sea utilizado por, o cerca de niños o personas discapacitadas, y cuando el calefactor se deje encendido sin supervisión.

□ Si es posible, desconecta siempre este electrodoméstico cuando no esté en uso.

□ No utilices ningún calefactor con un cable o enchufe dañado, o después de que este electrodoméstico falle, o haya sufrido caídas o daños de cualquier tipo.

□ Cualquier reparación a este producto debe ser llevada a cabo por una persona de servicio calificada.

□ Bajo ninguna circunstancia debe modificarse este electrodoméstico. Las piezas que necesitan retirarse para prestarles servicio deben ser reemplazadas antes de usar este electrodoméstico de nuevo.

□ No usar en exteriores.

□ Este calefactor no está diseñado para uso en baños, áreas de lavado y otros sitios interiores similares. Nunca coloques este electrodoméstico donde pueda caerse en una bañera o recipiente con agua.

□ No uses este calefactor en lugares elevados, como estantes, plataformas elevadas, etc.

□ No pasar el cable debajo de alfombras. No cubras el cable con tapetes, alfombras de pasillo o cubiertas similares. Coloca el cable lejos de las zonas de alto tráfico, donde alguien pueda enredarse con él y caer.

□ Para desconectar este electrodoméstico, gira los controles a la posición de apagado, luego quita el enchufe del tomacorriente.

□ Sólo conéctalo a tomacorrientes que estén apropiadamente conectados a tierra.

□ Al instalar este electrodoméstico, debe conectarse a tierra de acuerdo con los códigos locales, con los códigos eléctricos canadienses actuales CSA C22.1 o para las instalaciones en EE. UU., cumplir con todos los códigos locales y el Código Nacional de

Electricidad, ANSI/NFPA Núm. 70.

□ No insertes, ni permitas que caigan objetos extraños en ninguna de las salidas de ventilación o escape; ello podría causar descargas eléctricas o incendios, o podría dañar el electrodoméstico.

□ Para evitar posibles incendios, no bloquees las entradas o salidas de aire por ningún medio. No usar en superficies suaves, como una cama, donde las salidas puedan bloquearse.

□ Este electrodoméstico tiene en su interior piezas calientes y que chispean. No lo uses en áreas en las que se guarda gasolina, pintura u otros líquidos inflamables. Este electrodoméstico no debe usarse como una estantería para secar ropa, ni para colgar medias o decoraciones de Navidad de él o cerca de él.

□ Usa este electrodoméstico sólo de la manera en la que se describe en este manual. Cualquier otro tipo de uso distinto al recomendado por el fabricante puede causar incendios, descargas eléctricas o lesiones a personas.

□ Siempre conecta los calefactores directamente al tomacorriente/receptáculo de pared. Siempre enchufe la unidad en untomacorriente/ receptáculo de la pared. Nunca deben usarse una extensión eléctrica ni un tomacorriente de alimentación reubicable (tomacorriente/enchufe múltiple).

□ No uses este calefactor si le faltan las patas o están dañadas o rotas.

□ «GUARDA ESTAS INSTRUCCIONES»

17

Garantía

GARANTÍA DE 1 AÑO

LO QUE ESTÁ CUBIERTO

El fabricante garantiza que su nueva estufa eléctrica está libre de defectos de fabricación y materiales por un periodo de un año a partir de la fecha de compra, sujeto a las siguientes condiciones y limitaciones.

Esta estufa eléctrica debe ser instalada y operada en todo momento de acuerdo con las instrucciones proporcionadas con el producto.

Cualquier alteración, abuso intencionado, accidente o mal uso del producto anulará esta garantía. Esta garantía es intransferible y es hecha al propietario original, siempre que la compra fue hecha mediante un proveedor autorizado del fabricante. Esta garantía está limitada a la reparación o reemplazo de pieza(s) que se encuentren defectuosas en materiales o mano de obra, siempre que tal(es) pieza(s) hayan estado sujetas a condiciones normales de uso y servicio, luego de que dicho defecto sea confirmado por la inspección de fabricante. El fabricante puede, a su discreción, liberar de todas las obligaciones, con respecto a esta garantía mediante el reembolso del precio al por mayor de la(s) pieza(s) defectuosa(s).

LO QUE NO ESTÁ CUBIERTO

Cualquier instalación, trabajo, construcción, transporte u otros costos/gastos que surjan de pieza(s) defectuosa(s), reparación, reemplazo u otra cosa similar, no será cubierta por esta garantía y tampoco el fabricante asumirá responsabilidad por lo mismo. Además, el fabricante no será responsable de ningún daño incidental, indirecto o consecuente, excepto como lo establezca la ley.

Todas las otras garantías, expresas o implícitas, con respecto al producto, sus componentes y accesorios, o cualquier obligación/ responsabilidad civil sobre la pieza del fabricante, por la presente se excluyen expresamente. El fabricante tampoco asume, ni autoriza a ninguna tercera parte a asumir, en su nombre, cualquier otra responsabilidad civil con respecto a la venta de este producto. Las garantías como están descritas dentro de este documento, no aplican a accesorios que no son del fabricante usadas junto con la instalación de este producto.

Esta garantía no tiene validez si: la estufa ha sido operada en atmósferas contaminadas con cloro, flúor u otro químico dañino; la estufa está sujeta a periodos prolongados de humedad o condensación; la estufa es alterada, maltratada intencionalmente, dañada por accidente o usada incorrectamente en cualquier manera.

Si se necesita servicio de garantía, llama al Servicio al Cliente de StyleWell 1-877-527-0313 de lunes a viernes entre 8 a.m. y 7 p.m., (hora del Este de E.E. U.U.), Sábado entre 9 a.m. y 6 p.m., (hora del Este de E.E. U.U.).

Asegúrese de tener su garantía, su recibo de venta y el número de modelo/serie de su producto.

NO INTENTE HACER TRABAJO DE SERVICIO USTED MISMO.

18 HOMEDEPOT.COM

Por favor, llame al 1-877-527-0313 para obtener más ayuda.

Pre-ensamblaje

PLANIFICACION DEL ENSAMBLAJE

Para evitar rayar el acabado, ensamble este producto sobre una superficie suave no abrasiva, como una alfombra o cartones.

El ensamblaje de este producto puede requerir más de una persona.

2in x 3in Instruction Manual

PIEZAS INCLUÍDAS

NOTA: Las herramientas son no mostradas en su tamaño real.

AA BB CC

Pieza Descripción

AA Tornillo

BB Clavija

CC Panel posterior del tornillo

DD Conector

EE Soporte de montaje

FF Desarmador

Cantidad

32 + 2 extra

16 + 1 extra

10 + 2 extra

5

1

1

DD EE FF

19

Pre-ensamblaje (continuación)

CONTENIDO DEL PAQUETE

D

E

F

Part

A

B

C

Description

Panel superior

Panel de base

Repisa multimedia

Panel trasero

Panel lateral superior

Moldura base

Quantity

1

1

1

1

2

1

Part Description

G Panel de soporte

K

L

H

J

M

Panel lateral izquierdo

Panel lateral derecho

Moldura izquierdo

Moldura derecho

Moldura superior

Quantity

2

1

1

1

1

1

20 HOMEDEPOT.COM

Por favor, llame al 1-877-527-0313 para obtener más ayuda.

Ensamblaje

1

Colocación de los conectores

□ Localice la moldura izquierda (K), moldura derecha (L), moldura superior (M) y moldura base (N) y colóquelas en una superficie suave para proteger el acabado.

□ Coloque cinco conectores (DD) en la moldura izquierda

(K), moldura derecha (L), moldura superior (M) y moldura base (F ) girando los cinco tornillos (AA) en el sentido de las agujas del reloj a través de los conectores. No dañe los tornillos (AA) apretándolos demasiado.

2

Colocación de las molduras en los

paneles laterales

□ Localice el panel lateral izquierdo (H) y panel lateral derecho

(J) y colóquelos sobre una superficie suave para proteger el acabado.

□ Fije la moldura izquierda (K) y la moldura derecha (L) a los paneles laterales (H y J) girando los tornillos (AA) en el sentido de las agujas del reloj a través de los conectores. No dañe los tornillos (AA) apretándolos demasiado.

AA

L

M

K

L

F

H

K

AA

DD

J

21

Ensamblaje (continuación)

3

Colocación de la moldura base en el panel base

□ Localice el panel base (B) y colóquelo sobre una superficie suave para proteger el acabado.

□ Fije la moldura base (F) al panel base (B) girando cuatro tornillos (AA) en el sentido de las agujas del reloj a través de los conectores. No dañe los tornillos (AA) apretándolos demasiado.

□ Fije los dos paneles de soporte (G) al panel base (B) girando cuatro tornillos (AA) en el sentido de las agujas del reloj a través de los conectores. No dañe los tornillos (AA) apretándolos demasiado.

AA

F

G

G

B

4

Colocación de la moldura superior en los paneles laterales

□ Inserte cuatro clavijas de madera (BB) dentro de los orificios sin rosca en la moldura superior (M).

□ Alinee las cuatro clavijas de madera (BB) en la moldura superior (M) con los orificios sin rosca en los paneles laterales izquierdo y derecho (J y H).

□ Presiónelos uno contra otro firmemente hasta que estén al ras.

J

M

BB

H

22 HOMEDEPOT.COM

Por favor, llame al 1-877-527-0313 para obtener más ayuda.

Ensamblaje (continuación)

5

Colocación de los paneles laterales en la base

□ Inserte cuatro clavijas de madera (BB) en los orificios sin rosca en la base (B).

□ Alinee las cuatro clavijas de madera (BB) en la base

(B) con los orificios sin rosca en los paneles laterales izquierdo y derecho.

□ Presione los paneles laterales izquierdo y derecho uno contra otro firmemente hasta que estén al ras.

□ Inserte cuatro tornillos (AA) en los conectores en los paneles laterales y gírelos en el sentido de las agujas del reloj. No dañe los tornillos (AA) apretándolos demasiado.

AA

J

BB

B

H

6

Colocación de la repisa multimedia

□ Alinee los conectores en los paneles laterales (J y H) con los orificios en la repisa multimedia (C).

□ Fije la repisa multimedia al ensamblaje de la base insertando siete tornillos (AA) a través de los conectores en los paneles laterales y girando en el sentido de las agujas del reloj. No dañe los tornillos (AA) apretándolos demasiado.

23

Ensamblaje (continuación)

7

Colocación de los paneles frontales y laterales en la repisa multimedia

□ Inserte cuatro clavijas de madera (BB) en los orificios sin rosca en la repisa multimedia (C).

□ Alinee las cuatro clavijas de madera (BB) en la repisa multimedia con los orificios sin rosca en el panel lateral superior (E).

□ Presiónelos uno contra otro firmemente hasta que estén al ras.

□ Inserte cuatro tornillos (AA) en los conectores en los paneles laterales superiores (E).

□ Fije los paneles laterales superiores (E) a la repisa multimedia (C) girando los tornillos (AA) en el sentido de las agujas del reloj. No dañe los tornillos (AA) apretándolos demasiado.

8

Colocación del panel superior

□ Localice el panel superior (A) y colóquelo sobre una superficie suave para proteger el acabado.

□ Inserte cuatro clavijas de madera (BB) dentro de los orificios sin rosca en los paneles laterales.

□ Alinee las cuatro clavijas de madera (BB) en los paneles laterales con los orificios sin rosca en el panel superior (A).

□ Presiónelos uno contra otro firmemente hasta que estén al ras.

□ Inserte cuatro tornillos (AA) en los conectores en los paneles laterales superiores.

Fije los paneles laterales superiores al panel superior

(A) girando los tornillos (AA) en el sentido de las agujas

del reloj con destornillador (FF). No dañe los tornillos

(AA) apretándolos demasiado.

24 HOMEDEPOT.COM

Por favor, llame al 1-877-527-0313 para obtener más ayuda.

Ensamblaje (continuación)

9

Colocación del panel trasero

□ Localice el panel trasero (D) y alinéelo a la parte trasera de la consola multimedia con la cara con acabado mirando hacia adentro.

□ Inserte y apriete diez tornillos de paneles posteriores (CC) para fijar el panel trasero (D) a la consola multimedia.

□ No dañe los tornillos (CC) apretándolos demasiado.

10

Instalación de la cámara

de combustión

□ Inserte la cámara de combustión dentro de la consola multimedia a través de la abertura posterior.

□ Empuje la cámara de combustión a través de la abertura posterior hasta que la moldura de metal de la cámara de combustión esté al ras con los paneles laterales (J y H).

□ Una vez que la cámara de combustión esté en su sitio fije los dos soportes de montaje incluidos con la cámara de combustión, insertando y apretando seis tornillos a través de los soportes de montaje en la consola multimedia. No dañe los tornillos apretándolos demasiado.

25

CC

D

Ensamblaje (continuación)

11

Instalación de dispositivo anti-tip

PELIGRO: Este producto es solo un disuasivo. No es un sustituto de supervisión apropiada de un adulto.

□ Instale el dispositivo antivuelco de acuerdo con las instrucciones de instalación.

EE

Pared

ADVERTENCIA: Debe instalar el Herraje contra Caidas para evitar accidentes o que se dañe la unidad.

Recomendamos montar estos herrajes a un taco de pared y a la Unidad.

Cuidado y limpieza

□ Siempre apague el calefactor y desconecte el cable eléctrico del tomacorriente antes de limpiarlo.

□ La limpieza del panel de control, localizado en la esquina superior derecha de la chimenea, debe hacerse usando solamente un paño suave, ligeramente humedecido en agua (de ser necesario, se puede agregar una pequeña cantidad de jabón de platos al agua) y secarse usando un paño suave limpio y seco. La limpieza del difusor de rejilla debe hacerse usando solamente agua y un paño libre de pelusa. NO use controles abrasivos y la rejilla de difusión.

26 HOMEDEPOT.COM

Por favor, llame al 1-877-527-0313 para obtener más ayuda.

Piezas de servicio

Pieza

F

G

D

E

H

A

B

C

L

M

J

K

Descripción

Panel superior

Panel de base

Repisa multimedia

Panel trasero

Panel lateral superior

Moldura base

Panel de soporte

Panel lateral izquierdo

Panel lateral derecho

Moldura izquierdo

Moldura derecho

Moldura superior

Paquete de herrajes

Manual

Cant.

1

1

1

1

2

1

2

1

1

1

1

1

1

1

Pieza

18-927-175-Y

Acabado negro envejecido

20-02-013

20-02-014

20-02-015

20-02-016

20-02-017

20-02-018

20-02-019

20-02-020

20-02-021

20-02-022

20-02-023

20-02-024

Pieza

18-927-93 / 18-927-93-Y

Acabado cereza

20-02-001

20-02-002

20-02-003

20-02-004

20-02-005

20-02-006

20-02-007

20-02-008

20-02-009

20-02-010

20-02-011

20-02-012

20-09-701

20-10-401

27

Pieza

18-927-204-Y

Acabado blanco

20-02-025

20-02-026

20-02-027

20-02-028

20-02-029

20-02-030

20-02-031

20-02-032

20-02-033

20-02-034

20-02-035

20-02-036

Resolución de fallas

Si tiene preguntas respecto al producto, llame a Servicio al Cliente de StyleWell, al 1-877-527-0313 lunes a viernes entre 8 a.m. y 7 p.m., (hora del Este de E.E. U.U.), Sábado entre 9 a.m. y 6 p.m., (hora del Este de E.E. U.U.)

Problema Causa posible

Pantalla muestra "E1"

El calefactor no está funcionando.

El calefactor no sopla aire caliente.

No hay alimentación eléctrica y los leños no brillan.

Los leños brillan pero no tienen efecto de llama.

El calefactor no sopla aire cálido.

El sensor del termostato está dañado o desconectado.

Se ha activado el reinicio manual del protector de sobrecalentamiento.

El calefactor está en un ciclo de enfriamiento.

No hay alimentación eléctrica a la unidad.

El efecto de llama está apagado.

La configuración del termostato está evitando que se encienda el calefactor.

Solución

Desconecte la cámara de combustión, remueva el panel de la cámara de combustión y revise que el termostato esté enchufado en el tablero del circuito principal. Si esto no soluciona el problema contacte al servicio de atención al cliente para reemplazar el sensor del termostato.

Inspeccione el calefactor y revise que las entradas y salidas de aire no estén bloqueadas ya que esto puede causar sobrecalentamiento. Desconecte el calefactor por 30 minutos y déjelo enfriar. Reconecte y póngalo en marcha.

Monitoree si se presentan señales de sobrecalentamiento en el calefactor. Si el problema persiste descontinúe el uso del calefactor y contacte al servicio de atención al cliente.

El funcionamiento normal continuará durante varios minutos antes de apagarse. Tiempos variarán según las temperaturas. Durante este tiempo soplará aire frío.

Verifique que la unidad esté conectada a un tomacorrientes estándar de 120 voltios. Presione el botón de encendido varias veces y asegúrese de que esté en la posición de "ENCENDIDO".

Presione el botón de llama varias veces.

Ajuste la configuración de la temperatura del termostato para asegurarse de que el termostato está configurado más alto que la temperatura actual de la habitación.

Asegúrese de que la habitación en la que se encuentra el calefactor esté bien ventilada.

El calefactor está produciendo olor a quemado.

Se ha acumulado polvo en el espiral calefactor durante el proceso de fabricación. Se disipará rápidamente y no debería ocurrir nuevamente.

Verifique y asegúrese de que no hay materiales combustibles en un perímetro de 0.9 metros (3 pies) alrededor del calefactor.

Asegúrese de que hay un espacio libre de al menos 2.42 pulgadas (6.15 cm) entre ambos laterales y la parte posterior respecto a las paredes adyacentes.

Quite cualquier objeto combustible del calefactor.

Reposicione el calefactor para que haya suficiente espacio entre el calefactor y las paredes adyacentes.

28 HOMEDEPOT.COM

Por favor, llame al 1-877-527-0313 para obtener más ayuda.

¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de StyleWell de lunes a viernes entre

8 a.m. y 7 p.m., (hora del Este de E.E. U.U.), Sábado entre 9 a.m. y 6 p.m., (hora del Este de E.E. U.U.)

1-877-527-0313

HOMEDEPOT.COM

Conserva este manual para uso en el futuro.

Fabricado por: GHP Group, Inc. • 6440 W. Howard St. • Niles, IL 60714-3302

190401

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals