GE PHP9030DJBB Profile 30 in. Electric Induction Cooktop in Black with 4 Elements and Exact Fit Specification

PHP9030DJ
GE Profile™ Series 30" Built-In Touch-Control Induction Cooktop
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
IMPORTANT: Requires a 3" free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required when
installing wall oven underneath cooktop. Refer to
installation instructions. Requires a 15" minimum
from cooktop to adjacent overhead cabinets. Units
are furnished with a 48" flexible armored cable.
NOTE: 30" induction cooktops are approved for
use over select GE 27" and GE 30" Single Wall
Ovens and Warming Drawers. Refer to cooktop and
wall oven/warming drawer installation instructions
packed with product for current dimensional
data. If installed with a GE Telescopic Downdraft
System, consult both the cooktop and downdraft
installation instructions packed with product
before installing. Cooktop gas/electric supply
may need to be re-routed to install downdraft.
The countertop cutout requires 23-1/2” minimum
flat countertop surface and 25” minimum total
countertop depth. In addition, other clearances
to front edge of the countertop must be considered.
Before installing, consult installation instructions
packed with product for current dimensional data.
CUTOUT FILLER TRIM KIT: A filler trim kit
is available for use if your countertop cutout is
larger than the dimension shown, up to 29-13/16" x
20-7/16". Order JXTR32B for black or JXTR32W
for white, to reduce the cutout opening for
installation of this cooktop. These kits may be
ordered from your GE Appliances Dealer.
PHP9030DJ
APPROXIMATE COOKING DIMENSIONS
4-5/8" at baffle near center of
unit (except when installed
above an approved wall oven)
and
3-1/4" at rear of air intake
13" MAX. depth of unprotected
overhead cabinets (when no
hood or microwave is installed)
20-7/8"
29-3/4"
Cooktop
28"
19-1/4"
19-5/8"
to 19-3/4"
28-1/2" to
28-5/8"
1-3/4" MIN.
to rear wall
30" MIN. from countertop to
unprotected cabinet (when
no hood or microwave is
installed)
15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop
2-1/2" MIN.
Required
Electrical junction box 16" MIN.
below countertop
To insure accuracy, it is best to make a
template when cutting the opening in the counter
2" MIN. clearance
to side wall from cut-out
on both sides of cooktop
INSTALLATION
ABOVE
A WALL
OVEN
INSTALLATION
ABOVE
A WALL
OVEN
2-1/2" MIN
From front edge
of countertop to front
edge of cooktop cutout
KW RATING
240V
7.4
208V
6.4
AMPERAGE
31-1/4" MIN
From top surface
of countertop to
top surface of
wall oven support
platform
NOTE: Check local
codes for required
breaker size.
†
240V
40 Amps†
208V
40 Amps†
ADA
COMPLIANT
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
Listed by
Underwriters
Laboratories
Specification Revised 1/19
PHP9030DJ
GE Profile™ Series 30" Built-In Touch-Control Induction Cooktop
FEATURES AND BENEFITS
Four Induction elements – Enjoy a new level of rapid, precise heating
with a cool-to-the-touch surface that’s easy to clean
Digital touch controls – Accurately control your heating and enjoy an
easy to clean surface
1 1" 3,700-watt induction element – Rapidly boil water with
GE Appliances' most powerfull induction element
SyncBurners – Control two 7" elements simultaneously to evenly heat
large cookware or griddles*
Kitchen timer – Helps coordinate meal preparation and cooking
Control lock capability – Protects against unintended activation
an presence & size sensor – Cook efficiently with elements that heat to
P
the size of your pan and shut off when no pan is present
Red LED display with black glass surface – Achieve a modern look that
complements the entire kitchen
ot surface indicator lights – Know when elements are too
H
hot to touch with a quick glance
Model PHP9030DJBB – Black on black
PHP9030DJBB
*OPTIONAL STAINLESS STEEL CLAD
ALUMINUM GRIDDLE
Achieve even results with this lightweight griddle,
tailored to fit GE SyncBurners. Order part number
JXGRIDL1 from your GE Dealer.
GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another brand?
GE cooktops are guaranteed for an exact fit or GE Appliances will
pay up to $100 toward modifications
Visit geappliances.com for more info
Specification Revised 1/19

Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project