Sunstone BA-TH17 Signature Series Beveled Style 17 in. Swivel Paper Towel Holder Instructions

SIGNATURE SERIES

BEVELED STYLE

PRODUCT DESCRIPTION PRODUCT DIMENSIONS SPECIFICATIONS WARRANTY

17"x11" Paper Towel Holder w/Swivel Door

Item No. BA-TH17

Signature Series Beveled Style 17"

Paper Towel Holder w/Swivel Door

17" WIDTH x11-1/4" HEIGHT x8-

3/4" DEPTH (PRODUCT SIZE) 15"

WIDTH x9-1/4" HEIGHT x8-1/4"

DEPTH (CUT-OUT)

The Frame and All Parts are made from

16 gauge 304 SS. The Door Panel is made from 18 gauge 304 SS w/Light

Horizontal Brushed Finish #4. The

Handle is Cast Chrome Plated

• EXTERIOR FINISH -----------------3 YEARS

• STRUCTURE ------------------------3 YEARS

• HANDLE------------------------------1 YEAR

Product Dimensions Cut-Out Dimensions & Installation

VERTICAL

INSTALL AS EITHER

HORIZONTAL

After Inserting the Paper Towel

Holder into Cut-Out. Open the Tilt-

Out Door. Notice the Two Exposed

Pre-Drilled Holes. You can use

Screws to secure with just these two holes or you can remove the Door

Holder to access other two holes. 9-1/4" Wid th

1

1

-1

/4

"

H e ig t h

8

-3

/4

"

D e p th

17" W idth

Cut-Out Changes to

15" Width by 9-1/4" Height when Paper Towel Holder is installed as Horizontal

8-1/4" Depth

Product Features

FULLY SEALED BOX

REMOVABLE PAPER

TOWEL ROD

1. Locate the Two Hinge Screws & the Single Pin Screw and remove all Three to remove Towel Holder.

PRE-DRILLED HOLES

60 DEGREE SWIVEL HINGE

BEVELED RAISED FRAME

2. With the Door Holder removed, you will have access to the other two holes to secure box into framing.