Design House 584037 Middleton Single-Handle Standard Kitchen Faucet Manual
Add to my manuals2 Pages
advertisement
o 584037 - Polished Chrome o 583997 - Satin Nickel o 584003 - Oil Rubbed Bronze
TROUBLE SHOOTING
Problem : Faucet leaks around aerator or an improper flow pattern.
Cause : Aerator is incorrectly fitted or is dirty.
Action:
1. Unscrew the aerator. Make sure all internal parts are laying flat.
2. If there is debris, gently flush all parts inside.
3. Reinstall the aerator.
Problem : Faucet leaks from under handle.
Cause : Adjusting ring or cap assembly has loosened.
Action:
1. Move the handle to OFF position. Unscrew the set screw and remove the handle.
2. Tighten the adjusting ring by turning it clockwise with a small screwdriver. Move the ball stem to the on position and continually tighten the adjusting ring until the leak stops draining out from around the ball stem.
3. If the leak does not stop, loosen the adjusting ring and tighten the entire cap assembly by turning it clockwise. Re-tighten the adjusting ring as before.
4. Reinstall the handle.
Spout
Set screw
Set screw
Handle
Cap
Cam
Cam packing
Mixer ball
Disc
Disc spring
O-ring
Many of these parts come preassembled. This exploded diagram is to assist in trouble shooting.
Aerator
Diverter
Mounting nut
Block
O-ring
MAINTENANCE
Your new Design House faucet is designed to give you years of trouble free performance. Avoid abrasive cleaners, steel wool and harsh chemicals that will dull the finish and void your warranty.
Brass finishes are polished, then protected with a lacquer coating to help prevent tarnishing. Clean these surfaces only with a damp, soft cloth.
Keep it looking like new by cleaning it periodically with a mild solution of soapy water. Rinse thoroughly and then dry with a soft cloth.
CONSUMER PROTECTION WARNING
Under the Safe Drinking Water Act, the U.S. Environmental Protection Agency restricts the amount of lead used in brass and solder. Your new faucet is made in strict compliance with all government standards. The materials used in the manufacture of this faucet are of industry standard quality and are similar to other plumbing products having brass fittings.
To reduce the amount of lead in your drinking water, allow the water to run for a moment before filling your glass and remember to always use cold water for drinking purposes.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project