USE 1771.24 Mission Arts 24 in. Towel Bar installation Guide

PDF

Document

Tools Required
Pencil
3/16&quot; Drill Bit
Electric Drill
TOOLS FOR CIVILIZATION ™ Level
Assembly Instructions For: 1770, 1771 Screw Driver
1. Draw two center lines at the appropriate distance apart. See Figure 1.
2. Place bracket on center line and mark location of mounting screws.
Make sure the marks are level.
3. Drill four 3/16&quot; holes. Push in plastic anchors flush with the wall. Fasten mounting
bracket to wall with mounting screws. (See Fig. 2)
4. Place bar over mounting brackets and tighten set screws.
1770 16”
- №
| Mounting Bracket
- 1771 92&quot; “ К Mounting SCrews
FIG. | 2
Distance Between Center lines
A Center line
7 with marks for screws
e
FIG. 2 De
Distribted by Lifetime Hoan Corp. One Merrick Avenue Westbury, NY 11590 Tel.516.683.6000 #173
">

Hello! I am an AI chatbot specifically trained to assist you with the USE 1771.24 Installation Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!