Montana Woodworks MWHCDFS Specification

Montana Woodworks MWHCDFS Specification
“Ready to Finish”

The term “Ready to Finish” is used to describe items that are not yet finished, i.e.,
they require minimal preparation work and some type of high quality finish such as
varnish, lacquer, exterior stain, etc. in order to protect them from U.V. and weather
damage.

It is essential to finish the item(s) before exposure to U.V. rays and weather as both
will adversely affect the lifespan of the item. Failure to finish the item may void
warranty.

When choosing a finish, we strongly recommend purchasing a high quality exterior
finish as doing so will minimize future efforts necessary to maintain the finish and protect
the item.

You may apply a colored stain prior to the application of the final finish thereby
matching existing colors or items.

Follow manufacturer’s directions as printed on the product label to ensure finish is
properly applied. This will not only reduce the time before re-application but will more
effectively protect the item being finished

Most finish manufacturer’s recommend an annual inspection of the finished item.
Doing so will prevent unwarranted weather damage to the item.

Montana Woodworks pre-finished products feature finishes and/or stains from
Finish Works. These finishes may be purchased by calling 1.260.768.3220
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement