IVY SM-WT450MB
Share your pictures for a feature!
using #SwissMadison
Polishing the cutting surface to get chamfer angle as per drawing and deburring.
Apply lubricant on joint surface of straight tube and connecting pipe.
Fully insert the straight tube into cistern flushing outlet and connecting pipe into discharge outlet.
Draw the lines as above picture.
Apply lubricant on rubber washers of straight tube and connecting pipe, then insert into ceramic holes.
Mounting the ceramic bowl.
Draw the lines as above picture.
As per drawing,
L1 is distance between the two lines on straight tube.
L2 is distance between the two lines on connecting pipe.
Cut the straight tube and connecting pipe as per above drawing.
Fill gap with white cement or glass cement.
Attach the bowl via washer and bolt then cover the bolts with included cap.