Technical Data/ Use and Care Sheet World's Strongest Bond™ www.jbweld.com Revision date: Wood Restore Repair Putty May 2019 _____________________________________________________________________________________________________________________ PRODUCT BRIEF J-B Weld® Wood Restore Repair Putty is an all-purpose, professional strength wood putty, providing permanent repairs to damaged wood. It is specially formulated for interior or exterior wood projects; small cracks to large holes. J-B Weld® Wood Restore Repair Putty provides a hard, workable surface in 15 minutes. It will not shrink, crack, or split; can be shaped, sanded, drilled, carved, screwed, and painted. Part Number Container Size 40003 12 OZ. 40004 0.8 QT. PRODUCT BENEFITS • • • • • TYPICAL APPLICATIONS Exterior and Interior Use Fill Large Cracks and Voids Can be Sanded, Painted & Patched Fast Drying-Paint in 1 Hour Permanently Repair Damaged & Rotted Wood • • • • • Rebuilding Frames Securing Joints Anchoring Screws Repairing Rotted Wood Repairing Garage Doors DIRECTIONS FOR USE 1. PREPARE SURFACE: Clean surface from dirt, grease, oil, etc. Remove paint and primer before applying. 2. MIXING: Place a golf ball size amount of wood filler, ½” thick onto a mixing board. Across the diameter of the putty, squeeze out a line of hardener. Mix thoroughly with putty. 3. APPLICATION: With appropriate tool, apply in thin layers until gap is filled. 4. DRYING: WORK QUICKLY! Mixture sets in about 10 minutes at room temperature. Carving and shaping can begin in 20 minutes; sand, plane or file in 30 minutes. 5. CLEAN-UP: Tools and hands can be cleaned with acetone prior to filler hardening. Transport Information: This product is shipped by ground or rail as a non-regulated limited quantity. 49CFR 173.165 Prop-65: YES GENERAL INFORMATION The companion product to #40003 J-B Weld® Wood Restore Repair Putty is #40001 J-B Weld® Wood Restore Liquid Hardener or #40002 J-B Weld® Premium Liquid Epoxy. DISCLAIMER The information and recommendations contained herein are based on our research and are believed to be accurate, but no warranty, express or implied, is made or should be inferred. Purchasers should test the products to determine acceptable quality and suitability for their own intended use.