Evapo-Rust RB015 Rust-Block 16 oz. Water Based Rust Inhibitor by Evapo-Rust ManualAdd to my manuals
◉ Touch to zoom
NO NEED TO WORRY ABOUT STORING PARTS! Available in 16 0z., 5 and 55 Gallons ” Is easy to defend against RUST? HOW TO USE RUST BLOCK 1. Make sure item is clean and dry. 2. Coat surface evenly (spray, dip, wipe or brush on). 3. Allow to dry. 4. Store item indoors. Avoid moisture. RUST-BLOCK™ is a revolutionary water based spray that inhibits rust on all ferrous metals. However, it is harmless to skin or the environment. RUST-BLOCK™ is ideal for home or shop use. Use it to protect your tools, auto parts, hardware, gardening gear and more. Also, it is ideal for industrial use. Safely and economically support production line, maintenance, storage or shipping operations. RUST-BLOCK™ is the environmentally friendly product that is safe for all projects . It is non-corrosive, non-flammable and biodegradable. Most users simply rinse used solution down the local sewer system. How long will RUST-BLOCK™ last once it is applied? RUST-BLOCK™ will inhibit rust from forming on most metal for 6 months. Variables include smoothness of the metal, temperature and humidity. NON-CORROSIVE = PROTECTS FOR UP TO 6 MONTHS NON-FLAMMABLE — * SAFE ON ALL TYPES OF METAL * BIODEGRADABLE + * NO FOUL ODORS OR FUMES * NON-TOXIC * EASY TO USE * ECONOMICAL There are so many types of metal. Will RUST-BLOCK™ work on all kinds? Yes, RUST-BLOCK ™ will work with all ferrous and non-ferrous metals. It has been tested on copper and brass and works very well with these metals. If the steel has a coating, will the coating be damaged by using RUST-BLOCK™? No, RUST-BLOCK™ will not damage any polymers, plastic or coatings, and it can even be used on painted surfaces without damaging most paints. Are there any conditions that will affect the performance of RUST-BLOCK™? Yes, RUST-BLOCK ™ is a water based rust inhibitor designed for indoor use. If RUST-BLOCK™ is exposed to water, the water will weaken and/or remove the protective coating. Therefore, items treated with RUST-BLOCK™ must be kept away from direct contact with water. When RUST-BLOCK™ is used as a rust inhibitor, should it be removed prior to treating metal with a coating or paint? Yes, most coatings bond with the metal. Therefore, RUST-BLOCK™ should be removed before any other coatings are applied. We recommend that the RUST-BLOCK™ be rinsed off with water, and the parts dried prior fo another coating. SAFE, SIMPLE EASY TO USE!
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project