Location:

Oxford

®

4200-TRM, 4200TRMTC

Shower Valve Trim

Specification Submittal

Feature Highlights

• Oxford Shower Valve Trim

• Requires Temptrol ® Pressure Balancing Shower Valve

• Metal lever handle

• Diverter tub spout not included

• Showerhead not included

• Components shall be metal and nonmetallic construction, plated in standard Polished Chrome finish

• Available with TA-10 flow control spindle and T-12A cap assembly for Temptrol valve bodies installed with Test Cap

(order p/n 4200TRMTC)

Options/Modifications

☐ -LP

☐ -REB

☐ -VP

☐ -STN

Loop handle

Rebuild trim kit, includes TA-10 and TA-4

Vandal resistant escutcheon screws in place of standard screws

Satin Nickel finish

Note: Append appropriate -suffix to model number.

Model Numbers

☐ 4200-TRM

Shower Valve Trim, Temptrol Pressure Balancing Shower Valve ordered separately

☐ 4200TRMTC

Shower Valve Trim with TA-10 flow control spindle and

T-12A cap assembly, must order Temptrol valve with Test Cap

Compliance

• ASME A112.18.1/CSA B125.1

Warranty

Limited Lifetime - to the original end purchaser in consumer/residential installations.

5 Years - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete warranty information.

Go to www.symmons.com/register to register your Symmons product.

Dimensions

Rough-in

Notes:

1) Valve body and piping not included and shown as reference only.

2) Plaster shield (p/n T-176) for dry wall, plaster or other type walls 1/2" or greater.

3) All dimensions measured from nominal rough-in.

4) Dimensions subject to change without notice.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621

Copyright © 2019 Symmons Industries, Inc. ■ symmons.com ■ [email protected] ■ ZV-610 REV A ■ 020119