Kohler K-2388-0 Inscribe Wading Pool Drop-In Cast Iron Bathroom Sink Specification

Features

• KOHLER cast iron

• Self-rimming

• Without overflow

• Less faucet hole

• Countertop installation

• 16-1/2

″

(41.9 cm) diameter

Codes/Standards Applicable

Specified model meets or exceeds the following:

• ICC/ANSI A117.1

• IAPMO/cUPC

• ASME A112.19.1

• CSA B45

• ADA

INSCRIBE

TM

WADING POOL

®

LAVATORY

K-2388

Specified Model

Model

K-2388

Description

Wading Pool lavatory

Recommended Accessories

K-9018 Adjustable P-trap with extension

K-7126 Pop-up lavatory drain

Colors/Finishes

• 0: White

• Other: Refer to Price Book for additional colors/finishes

Accessories:

• CP: Polished Chrome

• Other: Refer to Price Book for additional colors/finishes

Colors/Finishes

❑ 0 ❑ Other_____

❑ CP

❑

CP

❑ Other_____

❑

Other_____

Product Specification

The self-rimming cast iron lavatory shall be 16-1/2 ″ (41.9 cm) in diameter. Lavatory shall be without overflow and less faucet hole. Lavatory shall be countertop installation. Lavatory shall be Kohler Model K-2388-_______.

Page 1 of 2

1091071-4A

USA: 1-800-4-KOHLER

Canada: 1-800-964-5590 kohler.com

INSCRIBE

TM

Technical Information

Fixture*:

Basin area

Water depth

Drain hole

14-3/4 ″ (37.5 cm) D.

4-9/16

″

(11.6 cm)

1-3/4

″

(4.4 cm) D.

* Approximate measurements for comparison only.

Included component:

Cut-out template 1091072-7

Installation Notes

Install this product according to the installation guide.

Product does not have overflow.

NOTICE: The countertop manufacturer or cutter must use the cut-out template provided with the product, or a current cut-out template provided by the Kohler Co. (call

1-800-4-KOHLER). Kohler Co. is not responsible for errors when the incorrect cut-out template is used.

The spout must be a minimum of 5 ″ (12.7 cm) long for adequate clearance into the lavatory when installed with the centerline, as shown.

The spout must be tall enough to clear the 3-1/16

″

(7.8 cm) rim height and provide a 1

″

(2.5 cm) air gap per ASME

A112.1.2.

1-7/8"

(4.8 cm)

24" (61 cm)

14-3/4"

(37.5 cm) D.

14"

(35.6 cm)

8-1/4" (21 cm)

16-1/2" (41.9 cm) D.

12-1/8"

(30.8 cm)

1-1/4" OD

3-1/16"

(7.8 cm) 6-1/2"

(16.5 cm)

34"

(86.4 cm)

27"

(68.8 cm)

Min

8"

(20.3 cm)

Min 6"

(15.2 cm)

Max

9"

(22.9 cm)

Min

Recommended ADA Clearance

3/8" Hot

4" (10.2 cm)

3/8" Cold

Product Diagram

INSCRIBE

TM

WADING POOL

®

Page 2 of 2

1091071-4A

LAVATORY