PRO AQUA PRO-100-E Pro Aqua ELITE Whole House Water Filter 3 Stage Well Water Filtration System with Gauges, PR Button, 1 Ports, Filter Set Manual

PRO AQUA PRO-100-E Pro Aqua ELITE Whole House Water Filter 3 Stage Well Water Filtration System with Gauges, PR Button, 1 Ports, Filter Set Manual
Replacing Your Filters
Replacement Filter Set: FC-PK-100E
To insure your system keeps performing at its best, only use original OEM Certified filters, untested filters
will reduce performance and void its warranty.
Before starting: Turn incoming water off then press and hold the PR button to relief the pressure in the
system. Ensure to place a bucket or rag to catch any splashing water.
1
2
PR BUTTON
STAGE 3
HOUSING
STAGE 1
HOUSING
Remove housing using the housing wrench by
turning the handle counterclockwise.
Remove the old filter and install the new filter.
Ensure to center the filter cartridge properly in the
housing.
3
4
STAGE 3
HOUSING
STAGE 3
HOUSING
STAGE 1
HOUSING
STAGE 1
HOUSING
Inspect the O-Ring on the housing for any
damage or cracks. Ensure the O-Ring is sitting
properly in the groove. Lubricate the O-Ring
and housing threads with silicone lubricant or
a food-grade lubricant.
Reinstall the housing by pushing the housing
up and at the same time turning the housing
clockwise. Ensure to keep the housing and
filter cartridge straight. Improper installation
will cause the filter cartridge to not sit properly in the housing and will prevent the housing
from closing all the way.
* Hand tighten. Do not overtighten housing.
-5-
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement