Pentek PENTEK-BN-420-100 Nylon Bag Filter Manual

Add to my manuals
2 Pages

advertisement

Pentek PENTEK-BN-420-100 Nylon Bag Filter Manual | Manualzz

bp, bphe aNd bN SerieS FiLTer bagS

• Thermally welded unique design results in consistent filtration efficiencies

• Semi-rigid cylindrical design is easily crushed and incinerated

• higher productivity – faster bag “change-outs”

BP-420

BN-420

BP-410

BHPE-420

BHPE-410

BN-410

Polypropylene bags are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and microorganisms.

BP Series (Polypropylene Felt) Bags

An assortment of filtration ratings is offered – from 1 to 200 microns

– to comply with any filtration requirement.

The bags are manufactured from felt due to its high solids loading capabilities, in comparison to similar mesh fabrics. The media is created by needle-punching two layers of synthetic fibers together in a supporting scrim. A glazed finish, created by melting the outermost surface fibers, is used to produce a bond that reduces the possibility of migration.

BPHE Series (High Efficiency) Bags

High efficiency bags are offered for those critical applications when high efficiency combined with high dirt-holding capacity is required. Polypropylene materials are processed into microfibers with diameters of 1-10 microns or more.

These fibers are converted into filter material. Microfiber media are covered with spun-bonded polypropylene.

BN Series (Strainer) Bags

Woven monofilment materials are offered in nylon with micron ratings of 50-800 and efficiencies from 75 to 95 percent. The materials are cleanable and reusable.

bp, bphe, & bN SerieS

Filter bags

)JHI&GmDJFODZ#BHT

NJDSPOT

NJDSPOT

NJDSPOT

NJDSPOT

NJDSPOT

NJDSPOT

1PMZQSPQZMFOF'FMU#BHT

50

4.5

100

8.3

'MPX3BUFPG8BUFS $14!„'HQN

200

16.6

400

27.7

800

50.0

Viscosity (cps)

1000

56.2

1500 2000 4000 6000 8000 10000

77.2

113.6

161.0

250.0

325.0

430.0

Correction Factor

'MPX3BUFPG8BUFS $14!„'HQN

Cartridge Specifications and performance data

Model dimensions

BP-410

BP-420

4" x 8 5 ⁄

8

" (102 mm x 218 mm)

4" x 18" (102 mm x 457 mm)

BPHE-410 4" x 8 5 ⁄

8

" (102 mm x 218 mm)

BPHE-420 4" x 18" (102 mm x 457 mm)

BN-410

BN-420

4" x 8 5 ⁄

8

" (102 mm x 218 mm)

4" x 18" (102 mm x 457 mm)

Filter Media Micron rating

Glazed Polypropylene Felt

Glazed Polypropylene Felt

Polypropylene microfibers with spun-bonded polypropylene covers

Polypropylene microfibers with spun-bonded polypropylene covers

Nylon monofilament mesh

Nylon monofilament mesh

1, 5, 10, 25, 50, 100, 200

1, 5, 10, 25, 50, 100, 200

1, 5, 10, 25, 50, 75, 100

1, 5, 10, 25, 50, 75, 100

50, 100, 150, 200, 250, 300, 400, 600, 800

50, 100, 150, 200, 250, 300, 400, 600, 800

Case

Quantity

20

20

20

20

20

20

Maximum Temperature 200ºF (93.3ºC)

See application literature for housing rating.

WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

NOTE: This information is for general guidance. Users should test bag materials with media involved to determine compatibility.

CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.

©2006 Pentair Filtration, Inc.

502 Indiana Avenue • P.O. Box 1047 • Sheboygan, Wisconsin 53082-1047

Customer Service: 800.645.0267 • Fax: 888.203.7361 • [email protected]

International: 920.457.9435 • Fax: 920.457.2417 • [email protected]

www.pentekfiltration.com Printed in USA MR06 310088

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement