Kichler Lighting 15774AZT27R Brick Light Spec Sheet

Project:
Type:
Ordering # :
Comments:
LED Brick Light
FEATURES
• Cast Aluminum Housing w/ Textured Architectural Bronze Finish
• Designed to be Integrated into a Brick Wall During Construction
• Casts a Low, Even Spread of Energy Efficient LED Light
• 3.8W / 4.8 VA Light Output, 2950K (-150 / +175) High CRI
• 9-15V AC/DC Operating Range w/ Integrated, Constant Voltage Driver
• Stainless Steel Mounting Hardware & Junction Box
• Wire Connection Must be Made Inside of Fixture
• Suitable For Use in Wet Location
• 10-Year / 40,000 Hour Warranty on LED Driver & All Other Electrical Components
• 5-Year Warranty on Aluminum LED Housings & Exterior Finishes
3.25"
(LOUVERED)
8"
4"
(W/LENS)
15773 – Fixture Photometric (fc)
2.375"
2.5
3'
12"
0.22 2.08 1.87 1.85 1.3 0.85
–
24"
0.12 0.16 0.29 0.72 0.77 0.68 0.52
–
36"
0.04 0.05 0.09 0.12 0.16 .026 .026
–
Mounting Height
9.5"
15773
Louver face
3.25"
8"
4"
0'
0.5'
1'
1.5'
2'
4'
–
15774 –Fixture Photometric (fc)
2.375"
9.5"
15774
Heat-resistant glass lens
1'
1.5'
2'
12"
2.02 4.17 3.0
2.0
1.0 0.68 0.48
24"
0.23 0.61 0.96 0.9 0.75 0.62 0.51
–
36"
0.05 0.16 0.27 0.38 0.38 0.35 0.31
–
Mounting Height
0'
0.5'
2.5
3'
4'
–
ORDERING INFORMATION
EXAMPLE: 15773AZT (Product # & Finish)
PRODUCT
WATTAGE/STYLE
LIGHT SOURCE
LED Brick Light w/ Louvers
15773
AZT - Textured Architectural Bronze
- 3.8 Watts / 4.7 Voltage Amps
- Features a Louver Face
- Dimensions: 4"H x 9.5"W x 3.25"D
LED SPECS
LED Brick Light w/ Lens
15774
- Integrated LEDs & Driver
- 9V – 15V AC/DC
- 2950K Color Temperature
- 40,000 Hours Lamp Life To
L70 Specifications **
AZT - Textured Architectural Bronze
- 3.8 Watts / 4.7 Voltage Amps
- Features a Heat-Resistant Glass Lens
- Dimensions: 4"H x 9.5"W x 3.25"D
INCLUDED MOUNTING ACCESSORIES
- Stainless Steel Mounting
Hardware & Junction Box
Note: Fixture is Not For Use
w/ Electronic Transformers
NOTES
**Definition of 40,000 hours: Voluntarily following the accepted industry standard of L70, Kichler rates the entire lighting fixture system at 40,000 hours; with
engineered electronics that will last at least 40,000 hours, superior optical engineering, and finally utilizing a design that operates at the optimal temperature
thresholds for the LED chips. The end result is a complete light fixture that does not require replacement parts and will provide 70% or more of its original light
output for at least 40,000 hours. It has been proven that the human eye can hardly detect any difference in light output when light output is at 70% or above of
its original output.
For Warranty Information,
please visit www.landscapelighting.com
We reserve the right to revise the design or components of any product due to
parts availability or change in UL standards, without assuming any obligation or
liability to modify any products previously manufactured, and without notice.
7711 E. Pleasant Valley Road, Cleveland, OH 44131 ph:(216) 573-1000 fax:(216) 573-2270 email:[email protected] web:landscapelighting.com