Mettler Toledo BC Scales-Dual Display Installation Instruction

MAJOR COMPONENTS:

0271 DUAL REMOTE DISPLAYS

1. BCA SCALE WITH NO BASE-MOUNTED DISPLAY a. (2) WALL MOUNTS or b. (2) SINGLE TOWERS or c. (1) WALL MOUNT, (1) SINGLE TOWER or

INSTALLATION INSTRUCTIONS:

1. REMOVE POWER FROM SCALE BEFORE TAKING ANY STEPS TOWARD ADDING DISPLAYS.

2. LOCATE THE I/O CONNECTOR ACCESS UNDER THE SCALE.

3. IF THERE IS A BASE-MOUNTED DISPLAY, THIS MUST BE DISCONNECTED.

4. RELEASE THE RJ45 “PHONE” STYLE CONNECTOR BY PRESSING DOWN THE TAB.

5. CONNECT THE NEW DISPLAYS BY SIMPLY PUSHING THE RJ45 CONNECTOR INTO EITHER DISPLAY

CONNECTOR UNTIL IT CLICKS.

6. MOUNT THE REMOTE DISPLAYS WHERE DESIRED. (MOUNTING SCREWS NOT PROVIDED.)

7. ARRANGE AND SECURE EXCESS CABLE TO ASSURE A SAFE INSTALLATION.