Victron Energy Orion DC-DC Converters 110V, Isolated Datasheet

Victron Energy Orion DC-DC Converters 110V, Isolated Datasheet
Orion DC-DC Converters 110V, isolated
www.victronenergy.com
Isolated Converters
Orion 110 Volt
Power rating (W)
360
Galvanic isolation
yes
Temperature increase after 30 minutes at full load (°C)
30
Fan assisted cooling
(temp. controlled)
yes
Weight kg (lbs)
1,4 (3.1)
Dimensions hxwxd in mm (hxwxd in inches)
82 x 132 x 190
Input voltage
(3.2 x 5.2 x 7.5)
110V (60 – 140V)
Output voltage
12,5V or 24V
Common Characteristics
Output voltage stability
Output voltage tolerance
Output noise
Off load current
Efficiency
Isolation
Operating temperature
Humidity
Casework
2%
3%
< 50mV rms
< 25mA
appr. 85%
> 400Vrms between input, output and case
- 20 to + 40°C (0 to 100°F). Derate linearly to 0A at 70°C (160°F)
Max 95% non-condensing
Anodised aluminium
Connections
6.3mm (0.25 inch) push-on flat blade connectors
Protection: Overcurrent
Overheating
Reverse polarity connection
Overvoltage
Standards: Safety
Emission
Immunity
Short circuit proof
Reduction of output voltage
Fuse and reverse connected diode across input
Varistor (also protects against load dump)
EN 60950
EN 61000-6-3, EN 55014-1
EN 61000-6-2, EN 61000-6-1, EN 55014-2
Orion isolated 110V
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
General phone: +31 (0)36 535 97 00 | E-mail: [email protected]
www.victronenergy.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement