Chain and Gate Connection Accessory Kit DoorKing Part Numbers 2600-849, 2600-852 20 ft. #41 Chain 20 ft. #40 Chain Accessories to connect a slide gate operator to a sliding gate with #40 or #41 chain. Kit Includes: ket ain c Bra 1. 20 ft. of chain with (2) master links. 2. (2) Chain stop assemblies. 3. (2) Chain brackets with chain connectors. Chain stop installation at end of gate. Ch Slides into grove. Rubber bumper faces towards gate operator. Master Link Slides around chain. Fits between chain links. Rubber Bumper Chain stop installed at opposite end. Chain Bracket Nut Adjust the chain by tightening the chain bracket nuts. The chain should sag no more than one (1) inch per 10 feet of chain travel. Do not over tighten the chain. To order extra chain: 10 ft. #41 chain. - P/N 2600-443 10 ft. #40 chain. - P/N 2600-444 2840-065-B-12-08 Copyright 2008 DoorKing, Inc. All rights reserved. 120 Glasgow Avenue Inglewood, California 90301 U.S.A.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project