Magma Bullet Master Mark 8 Instructions

Magma Bullet Master Mark 8 Instructions
Removal & Replacement of Orifice Plate
Use the long wrench to loosen and tighten the two screws. Use caution when tightening
the screws with the long wrench. The screws can be easily over tightened.
With the melting pot hot use the swivel tool to back out one screw and set it aside. The
orifice plate will rest on the second screw and will come out with it. Upon replacement
set the orifice plate on the swivel tool with one screw. Remount the orifice plate with ½
to 1 turn. Proceed with the second screw and snug. Now snug the first screw.
Carefully tighten both screws with the long wrench.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement