230V Portable
Parts Washer
Stock No.22494 Part No.DPW3
INSTRUCTIONS 08/2012
(DRAPER Y
| SPECIFICATION |
The Draper Tools policy of continuous improvement determines the right to change specification
without notice.
RY £0 TG oP 22494
E 0 PP DPW 3
Na 11€ MA ©) | € © | RES 230V - 50Hz
(€-]07- [|] O 9 Litre
Intenal dimensions (LXV XD)... eee 520x350x 75mm
Weight (Empty) TT 5kg
| SAFETY INSTRUCTIONS |
- Never over fill the Parts Washer. The level of the cleaning solution should be just below the parts tray.
- DO NOT use flammable liquids such as petrol. Use only recommended water based cleaning solution.
- Use in a well ventilated area as some cleaning solution fumes may be toxic.
- DO NOT smoke, operate near a naked flame, or machinery which may generate sparks.
- Avoid cleaning solution contact with skin and eyes, always wear protective clothing which conforms
to a recognised standard when necessary.
Note:- Never modify or jam the lid in an open position.
| GETTING TO KNOW YOUR PARTS WASHER |
Lid. 4 в
On/off switch.
Fluid hose.
Cleaning brush.
Tank.
Work shelf.
Drain.
Removeable filter mesh.
Tank plug.
Drain screw cap.
—
-
[55
[5]
[35]
[5
CY
LY
Г)
5)
—
- a,
OUOJUANO
N
DRAPER TOOLS LTD, HURSLEY ROAD, CHANDLER'S FORD, EASTLEIGH, HANTS. SO53 1YE U.K. www.drapertools.com e-mail: salesedrapertools.com
DBCH150812
(DRAPER | CONNECTION TO THE POWER SUPPLY |
Make sure the power supply information on the machine's rating plate are compatible with the power
supply you intend to connect it to.
The fan comes supplied with a UK standard 3 pin plug fitted. It is designed for connection to a domestic
power supply rated at 230V AC.
Because it is constructed mostly of plastic parts, it is a Class 2 machine; meaning, it is double insulated [9].
This is to prevent electrocution in the event of a failure.
Apart from replacing the fuse in the plug, no other electrical work is recommended on this parts washer.
DRAPER Y | DISPOSAL |
- At the end of the machine's working life, or when it can no longer be repaired, ensure that it is
disposed of according to national regulations.
- Contact your local authority for details of collection schemes in your area.
In all circumstances:
= Do not dispose of power tools with domestic waste.
= Do not incinerate.
= Do not abandon in the environment.
= Do not dispose of WEEE* as unsorted municipal waste. *Waste Electrical and
| Electronic Equipment.
(DRAPER | DECLARATION OF CONFORMITY |
We:
Draper Tools Ltd.,
Hursley Road,
Chandler's Ford,
Eastleigh, Hampshire.
SO53 1YF.
England.
Declare under our sole responsibility that the product:
Stock No:- 22494.
Part No:- DPW3.
Description:- Portable Parts Washer.
To which this declaration relates is in conformity with the following directive(s)
2004/108/EC, 2006/95/EC, 2011/95/EU.
Al Y
J.N. Draper
Chairman 28/06/2012
DRAPER TOOLS LTD, HURSLEY ROAD, CHANDLER'S FORD, EASTLEIGH, HANTS. SO53 1YE U.K. www.drapertools.com e-mail: [email protected]
DBCH150812
">
