Owner Instructions
Original Instructions
CAUTION Read instructions before using the machine
Operating Instructions
CT 570
CTD 570
CT 750
CTD 750
CT 900
CTD 900
www.numatic.com
Optional Extra’s (Wet Only)
Optional Extra’s (Dry Only)
Hepaflo Bags
Dry use only
570 Drum
NVM 3BH (604017) x10
Master Carton
10x10 (604817)
750 / 900 Drum
NVM 4BH (604019) x10
Master Carton
6x10 (604819)
Permatex Filter
Dry use only
NVM- 604116
Primary Permatex Filter for 365mm Machine
2
X 4
X 4
3
CT 900 / CTD 900
5
8
1 2
3
6
219847
NuChem 500 mls
9 10
4
7
11
15
12
16
13
17
14
4
18 19
20
23
25
Pump
26
21
Pump
24
22
5
Pump
I
0
Vac
I
0
6
7
=
CT 570 / CTD 570
CT 900 / CTD 900
5
1 2
6
3
1
4 5
2
7
8
8
3
6
4
7
CT 570
CTD 570
CT 570
CTD 570
Motor
1060 W
1060 W x 2
Capacity
Dry
23 Ltrs
23 Ltrs
AirFlo
Data
CT / CTD 570
Suction
49 L/sec
98 L/sec
Capacity
Wet
15 Ltrs
15 Ltrs
2400 mm
2400 mm
Size
415x415x645
Cleaning
Range
26.8m
26.8m
Weight
18.98 Kgs
20 Kgs
Class
II
Sound Pressure (LpA)
Uncertainty (KpA)
73.6-79 dB
CT 750
CTD 750
CT 750
CTD 750
Motor
1060 W
1060 W x 2
Capacity
Dry
35 Ltrs
35 Ltrs
AirFlo
Data
CT / CTD 750
Suction
49 L/sec
98 L/sec
Capacity
Wet
25 Ltrs
25 Ltrs
2400 mm
2400 mm
Size
680x550x940
Cleaning
Range
26.8m
26.8m
Weight
21.4 Kgs
23.9 Kgs
Class
II
Sound Pressure (LpA)
Uncertainty (KpA)
73.6-79 dB
CT 900
CTD 900
CT 900
CTD 900
Motor
1060 W
1060 W x 2
Capacity
Dry
40 Ltrs
40 Ltrs
AirFlo
49 L/sec
98 L/sec
Capacity
Wet
32 Ltrs
32 Ltrs
Data
CT / CTD 900
Suction
2400 mm
2400 mm
Size
800x490x880
Cleaning
Range
26.8m
26.8m
Weight
25.28 Kgs
27.78 Kgs
Class
II
Sound Pressure (LpA)
Uncertainty (KpA)
73.6-79 dB
9
Company name and address
About the machine
Machine Description
Voltage / Frequency
Power Rating
Weight (Ready to use)
Splash Proof Rating
Class 2 Symbol
Safety Critical Components
Mains lead
HO5VV-F x 10m x 2 x 1.00mm
2
HO5VV-F x 10m x 3 x 1.50mm
2
Filter Bag
NVM-3 BH >pp< construction 99.6%@0.3µm
NVM-4 BH >pp< construction 99.6%@0.3µm
Filter Permatex
NVM 604116 >pp< construction 96.0%@0.3µm
CE Mark
WEEE Logo
Yr / Wk / Serial Number
WEEE Legislation
(Waste, Electrical and Electronic Equipment)
packaging should be sorted for environmental-friendly recycling.
Do not dispose of Vacuum cleaner into household waste!
2012/19/EU on waste electrical and into national law.
Vacuum cleaners that are no longer suitable for use must be separately collected and sent for recovery in an environmental-friendly manner.
PPE
Personal protective equipment that may be required for certain operations.
Ear Protection Safety Footwear Head Protection Safety Gloves Dust / Allergens Protection Eye Protection Protective Clothing
NOTE:
A risk assessment should be conducted to determine which PPE should be worn.
10
Hi Viz Jacket
Caution Floorsign
Information for Wet & Dry Use/Spray Extraction Vacuum Cleaners
WARNING
Read the instruction manual before using the machine.
Operators shall be adequately instructed on the use of these machines.
As with all electrical equipment, care and attention must be exercised at all times during use, in addition to ensuring that routine and preventative maintenance is carried out periodically to ensure safe operation.
Failure to carry out maintenance as necessary, including the replacement of parts to the correct standard could render this equipment unsafe and the manufacturer can accept no responsibility in this respect.
The machine shall be disconnected from the mains by removing the plug from the supply socket during cleaning or maintenance and when replacing parts or converting the machine to another function.
This machine is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience or knowledge.
Children being supervised are NOT to play with the machine.
This appliance is intended to be assembled, cleaned and maintained by an adult.
This machine is not a toy.
This machine is not suitable for the collection of biological hazards, hazardous or explosive dust. You should contact your local distributor if you require a machine capable of performing these tasks.
CAUTION!
If foam/liquid comes out of machine exhaust, switch off immediately. Allow the accumulated liquid to drain out through the machine exhaust, check the float assembly to ensure correct operation, empty the container if full of liquid, reassemble the machine. Immediately upon start up there will be a certain amount of liquid issuing from the machine exhaust which will be the residue of liquid still within the power head. This will be quickly discharged after which the machine should function normally.
Liquid ejected from the machine could be hazardous as a result of its temperature, pressure or chemical content.
Ensure that the filtration system fitted to the machine is suitable for the material being collected.
This machine is for indoor use only.
This machine shall be stored indoors only
NOTE: This machine is also suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices for other than normal housekeeping purposes.
•
•
DO
• Use a bag and filter at all times when using ‘dry’.
Keep your machine clean.
Keep filters clean.
• Regularly clean the water level limiting float safety valve and examine for signs of damage or correct operation.
Keep hoses and tubes clear.
•
•
•
•
•
Replace any worn or damaged parts immediately.
Regularly examine the power cord, if damage is found, power cord must be replaced by a qualified person using the correct Numatic original part.
Empty dust container frequently.
Keep diffuser filter (where fitted) clean.
•
•
•
•
•
•
•
•
•
•
•
•
DON’T
• Use steam cleaners or pressure washers to clean the machine or use the machine in the rain.
Immerse in water for cleaning.
Allow any inexperienced repairs. Call the experts.
Use wet if float valve is not functioning or fitted.
Use to suck up hot ashes, or lighted cigarette ends.
Suck up liquid before emptying dirt from container.
Suck up dirt before emptying liquid from container.
Run the machine over the power cable during operation as a hazard may occur.
Pull on the cable to unplug the machine from the power supply.
Walk over-wet carpets, upholstery or fabrics.
Walk on clean carpets until fully dry.
Spray onto people or animals.
Attempt machine maintenance or cleaning unless the power supply plug has been removed from the supply outlet.
• This machine can be used for dry pick up, wet pick up and cleaning carpet and upholstery.
• Under any circumstances place foreign objects including (but not limited to) air fresheners, air freshener capsules or scented beads of any type into the top filter of the machine. Doing so can be dangerous and
•
• risk damage to the machine and may invalidate the machine warranty.
Spray extraction machines only
Use only approved cleaning preparations.
Use defoamer if necessary.
Use of detergents
When using any detergent with this machine, please ensure you have read the safety data on the container and you are familiar with the procedures to clear up spills, inhalation, skin and eye contact.
This product complies with the requirements EN 60335 -2-68.
When moving from one place to another, consider the weight of the machine.
11
Dry Mode maintenance/fault finding
If the vacuum cleaner stops working switch off and remove the plug from the wall before investigating were the fault lies.
If the vacuum cleaner will not pick up any debris from the surface, switch off and remove the plug from the wall, inspect the floor tool, wands and hose for blockages, if no blockages are found, the dust bag may be full if the dust bag is not full the filter may be blocked.
Wet mode maintenance/fault finding
If the vacuum cleaner stops working switch off and remove the plug from the wall before investigating were the fault lies.
If the vacuum cleaner has a blockage and will not pick up liquid, switch off and remove the plug from the wall, has the float valve operated, this will shut off the suction and the pitch of the vacuum motor will change
Remove the power head and empty the liquid out of the container, if the container is empty, check that the floor tool wands and hose are not blocked.
Spray extraction maintenance/fault finding
If the vacuum cleaner stops working switch off and remove the plug from the wall before investigating were the fault lies.
If the vacuum cleaner has a blockage and will not pick up liquid, switch off and remove the plug from the wall, has the float valve operated, this will shut off the suction and the pitch of the vacuum motor will change, Remove the power head and empty the liquid out of the container, if the container is empty, check that the floor tool wands and hose are not blocked.
If the spray nozzle is blocked a pin maybe used to clear the blockage.
No spray from nozzle and the pump tone changes, the solution tank is empty, refill the solution tank.
Flush the system with clean water after use.
After use always inspect the machine for damage.
NuChem 4 provided with this product.
INSTRUCTIONS FOR USE
TEST FOR COLOUR FASTNESS
Find an out of the way place which is not normally in view and test the carpet / fabric for colour fastness by rubbing the cloth dampened with correctly diluted NuChem 4.
Do not use on velvet type materials or any materials not suitable for wet cleaning according to fabric manufacturers cleaning instructions.
NUCHEM
For Normal soiling:
Pour one 40ml Measure into 5 litres of cold water.
CONTENTS:
For Heavy Soiling:
Pour two 40ml Measure into 5 litres of cold water.
Composition:
Greater than 30% = among other ingredients water
NuChem 4 is non-foaming, bactericidal, contains optical brightners and leaves no tacky residues in the fabric and is enhanced with both a delicate and discreet verbena scent.
Less than 5% = SODIUM XYLENE SULPHONATE
CAC: 1300-72-7
Classified as Irritant
[xI] r36/37/38
HEALTH AND SAFETY
Caution:
Keep out of the reach of children and pets.
Wear suitable gloves.
Aviod contact with skin and eyes.
In case of eye contact flush with clean water
Risk Phrases: R36 / 38: irritating to eyes and skin
Safety Phrases: S2: Keep out of the reach of children
S24: Avoid contact with skin and eyes
S37: Wear suitable gloves seek medical attention.
In case of contact with the skin rinse with plenty of clean water.
12
CTD 750
CT 900 / CTD 900
16
EU DECLARATION
OF
CONFORMITY
We hereby declare under our sole responsibility that the following equipment fulfils all the relevant provisions of the following EU Directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
Machine Description:
Type:CT, CTD series
Vacuum Cleaner
Manufactured by: Numatic International Limited
Relevant standards upon which conformity is declared include:
IEC 60335-1 2001 + A1 2004 + A2 2006 + National
Deviations
IEC 60335 -2-2 2002 +A1 +A2
IEC 60335 -2-68 2002 +A2
IEC60335 -2-69 2002 +A2
EN 55014-1 2001 +A1 2001, +A2 2002
EN 55014-2 1997 + A1 2001 (Cat II)
EN 50366 2003 + A1 2006
A technical construction file for this equipment is retained at the manufacturer’s address under the authorisation of the following signatory:
Name:Allyn Boyes Position: Technical Manager
Signed: Date: 20/04/2016
Numatic International Limited,
Chard , Somerset.
TA20 2GB www.numatic.co.uk
GB
13
14
15
HEADS
598046 CTD.900-2.BLACK.V16 UK
598139 CTD.900-2.BLACK.V30 EUROPE
598233 CT.750-2.BLACK.V16 UK
598317 CTD.750-2.BLACK.V16 UK
598358 CT.570-2.BLACK.V30 EUROPE
598342 CT.570-2.BLACK.V38 115V
598717 CTD.570-2.BLACK.V16 UK
598061 CTD.570-2.BLACK.V30 EUROPE
598242 CTD.570-2.BLACK.V38 115V
DRUMS
500709 CT575 BLUE DRUM
500313 CT900 BLUE DRUM
500152 CT750 STAINLESS STEEL DRUM
236010
236014
236018
236022
236030
236011
236015
236019
236023
236031
236009
236013
236017
236021
236029
CABLES
1MM X 3 CORE UK
1MM X 3 CORE EURO
1MM X 3 CORE SWISS
1MM X 3 CORE SOUTH AFRICA
1MM X 3 CORE AUSTRALIAN
1.5MM X 3 CORE UK
1.5MM X 3 CORE EURO
1.5MM X 3 CORE SWISS
1.5MM X 3 CORE SOUTH AFRICA
1.5MM X 3 CORE AUSTRALIAN
1MM X 2 CORE UK
1MM X 2 CORE EURO
1MM X 2 CORE SWISS
1MM X 2 CORE SOUTH AFRICA
1MM X 2 CORE AUSTRALIAN
DISTRIBUTED BY
Numatic International Limited, Chard, Somerset,
TA20 2GB, ENGLAND.
Telephone 01460 68600
Fax: 01460 68458 www. numatic.co.uk
Numatic International Limited, Chard, Somerset, TA20 2GB, ENGLAND.
Telephone 01460 68600 Fax: 01460 68458 www. numatic.co.uk
Subject to change without prior notice.
244013 11/19 (A08)
