Rosslare AC-G43 Outdoor Mullion Backlit PIN Standalone Controllers Data Sheet
Add to My manuals2 Pages
Rosslare AC-G43 is a standalone backlit PIN controller designed for indoor and outdoor access control systems. It features three security levels, programmable PIN code length, and various door alarms for enhanced security. The backlit keypad provides clear visibility in all lighting conditions, making it suitable for residential, commercial, and industrial applications. With its UV-resistant housing and water-resistant enclosure, it can withstand harsh weather conditions.
advertisement
AC-G43
Outdoor Mullion Backlit PIN
Standalone Controller
R
OSSLARE
’
S NEWEST STANDALONE BACKLIT
PIN
CONTROLLER
,
THE
AC-G43,
IS A COST
-
EFFECTIVE SOLUTION FOR INDOOR AND OUTDOOR SYSTEMS WHERE
PIN
CREDENTIALS ARE
REQUIRED .
T HIS DURABLE MODEL CAN BE EASILY PROGRAMMED WITH UP TO 500 USERS ,
ON A SINGLE DOOR
.
GENERAL DESCRIPTION
For greater peace of mind, this sturdy access
Master User control unit provides three levels of security that can be assigned to as many as 500 users.
The AC-G43 offers automatic mode recognition and a user-friendly set up menu, simplifying configuration and use. Extra features such as
Three access levels:
Normal
Bypass
Secure various door alarms, LED control input, and tamper detection provide extra security and flexibility.
Come rain or shine, this reader can handle the
Programmable PIN code length of 4-digits to
8- digits
Powered either by transformer (AC) or regulated power supply (DC) challenge, with its rugged UV-resistant housing and water-resistant enclosure for maximum durability.
The backlit keypad is clearly visible day or night, making these units ideal for residential, commercial and industrial applications.
MAIN FEATURES
Up to 500 users can be coded using Smart enroll and delete technology
Mounting template and installation kit are provided
PROFFESIONAL GRADE FEATURES
Water-resistant and UV-resistant, meets IP65
Internal buzzer
Two inputs: REX and Auxiliary
Two Form C, 2 Amp outputs: Lock Strike and
Auxiliary
Two tri-colored status/programming LEDs
Ten auxiliary modes including: Door Ajar,
Forced Door, Alarm Shunt, and Door Monitor
Programmable chime and siren when using
BL-D40 and ' ' bell button
Three user levels:
Normal – Requires single PIN code
Built-in optical back tamper detection
Secure – Requires dual PIN codes
SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
Operating Voltage Range
Input Current
Relay Outputs
Tamper
Inputs
Proximity Card Reader
OPERATIONAL SPECIFICATIONS
Capacity
Keypad
User Levels
Security Modes
Audio/Visual
Design
ENVIRONMENTAL SPECIFICATIONS
Operating Environment
Operating Temperature
Operating Humidity
RFI Protection
PHYSICAL SPECIFICATIONS
Dimensions (H x W x D)
Weight
12 to 24 VDC, from a regulated power supply
16 to 24VAC, from a transformer
Standby: 75 mA at 12 VDC
Maximum: 125 mA at 12 VDC
Lock strike: 2 A, Form C, N.O. and N.C.
Auxiliary: 2A Form C, N.O. and N.C.
Optical back tamper sensor
REX: N.O., dry contact
Auxiliary (In/Monitor): N.O. Dry Contact. 10 Programmable modes
Maximum read range*: 2.95 in. (75 mm)
Modulation: ASK at 125 kHz
Compatible cards: All 26-Bit EM cards
* Measured using Rosslare Prox Card AT-R14 or equivalent. Range also depends on electrical environment and proximity to metal.
500 Users, single/dual code each
2x6 keys for local programming and 4- to 8-digit PIN code entry
Normal, Secure, Master
Normal, Bypass, Secure
Interface for BL-D40 (bell, chime and siren enunciator)
Two tri-color LED indicators, built-in sounder
Epoxy potted, fully-sealed in a rugged polycarbonate enclosure. Red illuminated rubber keys. Suitable for harsh environments.
Water resistant, suitable for outdoor use (IP65)
-22 ˚F to 1 50 ˚F (-30 ˚C to 6 5 ˚C)
0 to 95% (non-condensing)
> 20 V/m up to 1000 MHz
5.33 x 1.74 x 1.12 in. (135.4 x 44.2 x 28.5 mm)
SYSTEM COMPONENTS
0.39 lbs (178 g)
The AC-G43 is compatible with the BL-D40 alarm, chime and door bell enunciator/strobe unit, as well as with the EX-01 Push to Exit button.
5-year Limited Product Warranty PRODUCT WARRANTY
ABOUT ROSSLARE SECURITY
Rosslare Security Products, a division of Rosslare Enterprises Ltd., has been manufacturing high-quality security products since 1980. The company’s three main lines – Access Control, Intrusion Detection and Guard Patrol – together with a growing product range have transformed Rosslare Security into a major worldwide force in security. Rosslare holds itself to the highest standards of customer service and manufacturing (ISO 9001:2008, ISO
14001:2004, ISO 13485:2003). The company complies with the EU Directive 2002/95/EC on Restriction of
Hazardous Substances (RoHS).
Visit our web site: www.rosslaresecurity.com
advertisement