Kits - Amplifiers

Kits - Amplifiers
www.e-electronica.es
Kits – DIY Hi-Fi Amplifiers | Model: FET400 PRO | Description: DIY Hi-Fi Amplifier 400W PRO
Content of the Kit:
•
•
•
DIY Hi-Fi Amplifier Kit 400W PRO (1 x 400W RMS)
User manual – English and the Electronic Draw of the Kit
One set of connectors:
8 x Mica Insulators, 8 x Screws, 4 x Connectors + 1 Audio IN
Applications:
•
“DIY Hi-Fi 400W PRO” Kit it’s recommended for high quality and high power sound applications and projects,
like 5.1, 2.1 or stereo sound systems. His characteristics recommend it also for low and high frequency sound
systems with equal performances and results.
Advantages:
•
•
•
•
•
•
•
•
PCB board type FR4 y 35µ
Dimension of PCB board: 165 x 51 mm
Constant output power: max 600 Watts RMS (1 x 600W RMS @ 10% THD)
Very low total distortion (THD).
Class AB amplifier type designed with FETMOS transistors type: 4 x IRFP 240 y 4 x IRFP 9240
Bridgeable configuration for Extreme Power – Up to 800W @ 4 Ohm @ 0.5% THD
Audio IN level for maxim output power: Vin = 1 Vpp
Very easy to mount in an amplifier enclosure or to adapt in a complex sound project
Characteristics:
•
•
•
•
•
Double supply voltage: (min. ± 30V … max. ± 70V DC)
Drain current: max. 6A
Quiescent drain current: 60... 120 mA
Output power (Watts RMS) for 0.5% total distortion:
Vin 1Vpp, Vcc = ± 70 V, Rout = 8 Ohm - 263 Watts
Vin 1Vpp, Vcc = ± 70 V, Rout = 6 Ohm - 350 Watts
Vin 1Vpp, Vcc = ± 70 V, Rout = 4 Ohm - 406 Watts
Power bandwidth: 16Hz... 35KHz. (± 3dB)
Electronicas Pantilimon S.L. VAT: ESB85364446 :: C/ Del Pinar 7, Madrid, Spain :: TEL: +34 658 180 420 :: E-mail: info@e-electronica.es
Copyright © 2007 e-electronica.es All rights reserved.
www.e-electronica.es
Módulos – DIY Amplificadores | Modelo: FET400 PRO | Descripción: DIY Amplificador Hi-Fi 400W PRO
Contenido del Kit:
•
•
•
Módulo DIY Amplificador 400 Vatios PRO (1 x 400W RMS)
Manual del Usuario – español y Esquema Electrónico del Kit
Un set de conectores:
8 x Mica Aislante, 8 x Tornillos, 4 x Conectores + 1 Audio IN
Aplicación:
•
El módulo “DIY Amplificador Hi-Fi 400W PRO” se recomienda para aplicaciones de alta calidad y potencia del
sonido en aplicaciones como etapas de potencia para sistemas 5.1, 2.1 o Estéreo. Se recomienda para todo el
espectro de frecuencias audio.
Ventajas:
•
•
•
•
•
•
•
•
Circuito impreso FR4 y 35µ
Dimensión del circuito impreso: 165 x 51 mm
Potencia de salida constante: hasta 600 Vatios RMS (1 X 600W RMS @ 10% THD)
Distorsión armónica total muy baja (THD)
Amplificador clase AB construido con transistores FETMOS tipo: 4 x IRFP 240 y 4 x IRFP 9240
Muy fácil de montar 2 Kits en Puente – Hasta 800W @ 4 Ohm @ 0.5% THD
Nivel Audio IN de entrada para una Máxima Potencia de salida: Vin = 1 Vpp
Muy fácil de contar en caja, o de adaptar en un montaje complejo de sonido
Características:
•
•
•
•
•
Tensión de alimentación doble: (min. ± 30V … max. ± 70V DC)
Consumo: máx.: 6A
Consumo en reposo (sin señal): 60... 120 mA
Potencia de salida (Vatios RMS) con distorsión armónica total de 0.5%:
Vin 1Vpp, Vcc = ± 70 V, Rout = 8 Ohm - 263 Vatios
Vin 1Vpp, Vcc = ± 70 V, Rout = 6 Ohm - 350 Vatios
Vin 1Vpp, Vcc = ± 70 V, Rout = 4 Ohm - 406 Vatios
Respuesta en frecuencia: 16Hz... 35KHz. (± 3dB)
Electronicas Pantilimon S.L. CIF: B85364446 :: C/ Del Pinar 7, Madrid, España :: TEL: +34 658 180 420 :: E-mail: info@e-electronica.es
Copyright © 2007 e-electronica.es Todos los derechos reservados.
www.e-electronica.es
Kits – DIY Amplificateurs Hi-Fi | Model: FET400 PRO | Description: DIY Amplificateur Hi-Fi 400W PRO
Contenu du Kit:
•
•
•
Kit DIY Amplificateur Hi-Fi 400W PRO (1 x 400W RMS)
Manuel de l’utilisation – English, avec schème électronique du Kit
Un ensemble de connecteurs:
8 x Mica Isolateurs, 8 x Vis de fixation, 4 x Connecteurs + 1 Audio IN
Applications:
•
“DIY Amplificateur Hi-Fi 400W PRO” Kit il a recommandé pour haut des applications saines de qualité et
projets, comme 5.1, 2.1 ou systèmes de son stéréo. Ses caractéristiques le recommandent également pour le
bas et salut les systèmes sains de fréquence avec des exécutions et des résultats égaux.
Avantages:
•
•
•
•
•
•
•
•
PCB circuit imprimé type FR4 et 35µ
Dimension du circuit imprimé PCB: 165 x 51 mm.
Puissance de sortie: max. 600 Watts RMS (1 x 600W RMS @ 10% THD)
Très bas total distorsion (THD)
Amplificateur class AB fait avec le type de transistors de FETMOS: 4 x IRFP 240 y 4 x IRFP 9240
Bridgeable amplificateur configuration pour Extreme Power – Up to 800W @ 4 Ohm @ 0.5% THD
Audio IN niveau pour Maximum Output Power: Vin = 1 Vpp
Très facile du mont dans clôture amplificateur ou pour s'adapter dans un projet sain complexe
Caractéristiques:
•
•
•
•
•
Tension d’alimentation double: (min. ± 30V … max. ± 70V DC)
Consommation max. 6A
Consommation en Stand-by: 60... 120 mA
Puissance maxi (Watts RMS) pour THD totale de 0,5%:
Vin 1Vpp, Vcc = ± 70 V, Rout = 8 Ohm - 263 Watts
Vin 1Vpp, Vcc = ± 70 V, Rout = 6 Ohm - 350 Watts
Vin 1Vpp, Vcc = ± 70 V, Rout = 4 Ohm - 406 Watts
Réponse en fréquences: 16Hz... 35KHz. (± 3dB)
Electronicas Pantilimon S.L. VAT: ESB85364446 :: C/ Del Pinar 7, Madrid, Espagne :: TEL: +34 658 180 420 :: E-mail: info@e-electronica.es
Copyright © 2007 e-electronica.es All rights reserved.
www.e-electronica.es
Kit – DIY Amplificatore Hi-Fi | Modello: FET400 PRO | Descrizione: DIY Amplificatore Hi-Fi 400W PRO
Contenuto del Kit:
•
•
•
Kit DIY Amplificatore 400 Watts PRO (1 x 400W RMS)
Manuale utente in Italiano, con Schemi Elettronici di montaggio
Un set di cavi di connessione:
8 x Isolatori Mica, 8 x Screws, 4 x Connettori + 1 Audio IN
Applicazioni:
•
Il “DIY Amplificatore Hi-Fi 400W PRO” Kit da noi proposto è da noi raccomandato per la ottima qualità del
suono qualunque siano le vostre necessità, come 5.1, 2.1 o altri sistemi stereo. Le sue caratteristiche lo
suggeriscono inoltre per il livello basso e alti sistemi sani di frequenza con le prestazioni ed i risultati uguali.
Vantaggi:
•
•
•
•
•
•
•
•
Scheda PCB, tipo FR4 a 35µ
Dimensioni della scheda PCB: 165 x 51 mm
Potenza d’uscita constante: 600 Watts RMS (1 x 600W RMS @ 10% THD)
Distorsione totale abbattuta a minimi livelli (THD)
Tipo dell’amplificatore AB progettato con transistori FETMOS: 4 x IRFP 240 y 4 x IRFP 9240
Bridgeable configuration for Extreme Power – Up to 800W @ 4 Ohm @ 0.5% THD
Audio IN level for maxim output power: Vin = 1 Vpp
Montaggio molto facile del Kit en cabinet, oppure adattandolo personalmente alle proprie esigenze
Characteristics:
•
•
•
•
•
Doppia Alimentazione: (min. ± 30V … max. ± 70V DC)
Consumi: max. 6A
Consumo en riposo (sin segnale): 60... 120 mA
Potenza de uscita (Watt RMS) per una THD massima ammissibile del 0,5%:
Vin 1Vpp, Vcc = ± 70 V, Rout = 8 Ohm - 263 Watts
Vin 1Vpp, Vcc = ± 70 V, Rout = 6 Ohm - 350 Watts
Vin 1Vpp, Vcc = ± 70 V, Rout = 4 Ohm - 406 Watts
Risposta in frequenza: 16Hz... 35KHz. (± 3dB)
Electronicas Pantilimon S.L. VAT: ESB85364446 :: C/ Del Pinar 7, Madrid, Spagne :: TEL: +34 658 180 420 :: E-mail: info@e-electronica.es
Copyright © 2007 e-electronica.es All rights reserved.
www.e-electronica.es
Kituri – DIY Amplificatoare Hi-Fi
| Model: FET400 PRO | Descriere:
DIY Amplificator Hi-Fi 400W PRO
Continutul Kitului:
•
•
•
Kit DIY Amplificator Hi-Fi 400 Waţi PRO (1 x 400W RMS)
Manual de utilizare – Romana, împreuna cu Schema Electronica a Kitului
Un set de conectori:
8 x Izolatoare Mica, 8 x Suruburi de fixare, 4 x Conectori + 1 Audio IN
Aplicatii:
•
Kitul “DIY Amplificator Hi-Fi 400W PRO” este recomandat pentru aplicaţii de înalta calitate a sunetului si pentru
proiecte de sunet precum cele 5.1, 2.1 sau stereo. De asemenea caracteristicile foarte bune îl recomanda,
pentru aplicaţii de frecvente înalte si joase, cu performante egale.
Avantaje:
•
•
•
•
•
•
•
•
Circuit PCB de tipul FR4 si 35µ
Dimensiunile plăcii PCB: 165 x 51 mm
Putere de ieşire constanta: pana la 600 Waţi RMS (1 x 600W RMS @ 10% THD)
Distorsiuni armonice totale mici (THD)
Amplificator in clasa AB construit cu tranzistoare FETMOS: 4 x IRFP 240 y 4 x IRFP 9240
Usor de montat in Punte pentru puteri de iesire foarte mari – Pana la 800W @ 4 Ohm @ 0.5% THD
Nivelul de intrate Audio IN pentru Puterea de Iesire Maxima : Vin = 1 Vpp
Foarte uşor de montat intr-o cutie de amplificator sau de adaptat intr-un proiect complex de sunet
Caracteristici:
•
•
•
•
•
Tensiunea de alimentare dubla: (min. ± 30V … max. ± 70V DC)
Curentul consumat: max. 6A
Curentul consumat in gol: 60... 120 mA
Puterea de ieşire (Waţi RMS) cu 0,5% distorsiuni totale:
Vin 1Vpp, Vcc = ± 70 V, Rout = 8 Ohm - 263 Wati
Vin 1Vpp, Vcc = ± 70 V, Rout = 6 Ohm - 350 Wati
Vin 1Vpp, Vcc = ± 70 V, Rout = 4 Ohm - 406 Wati
Domeniul de frecvenţe reprodus: 16Hz... 35KHz. (± 3dB)
Electronicas Pantilimon S.L. VAT: ESB85364446 :: C/ Del Pinar 7, Madrid, Spania :: TEL: +34 658 180 420 :: E-mail: info@e-electronica.es
Copyright © 2007 e-electronica.es All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising