Victor 1225-3A Printing Calculator Instructions Manual
Victor 1225-3A is a powerful calculator designed to simplify your calculations with features like programmable tax rate, four key memory functions, backspace, cost, sell, and margin. Calculate grand totals and use sigma to automatically add results to the total register. Its 12-digit fluorescent display and 2-color printing (with minus and negative in red) ensure clear and professional-looking results.
Advertisement
Advertisement
SERIES 1225 3A
12-DIGIT DISPLAY
2-COLOR
Printing Calculator
SERIE 1225-3A
GRAND AFFICHAGE DE 12 CHIFFRES
2 COULEURS
Calculatrices Imprimantes
SERIE 1225 3A
12 DÍGITOS, CON LCD GRANDE
2 COLORES
Calculadora de Impresión en
Instruction Manual
Manuel d'instructions
Manual de Instrucciones
PREFACE
Congratulations on your choice of a Victor electronic calculator. Careful design, quality materials, painstaking workmanship, and advanced research and productions facilities have given you a calculator that, with proper care, will provide years of trouble-free service. To assure future optimum performance, ask your Victor representative about low cost protection offered by Victor's Extended Guarantee
Protection Program.
This operating manual describes the features and operation of the Victor 1225-3A. This calculator also features the four basic arithmetic operations, grand total, sigma, percentage, percent of change, change sign, item count, non-date add functions, programmable tax rate, back space, cost, sell, margin, and four key memory functions.
E1
TABLE OF CONTENTS
Operations and General Maintenance
Replacing the ink roller
Loading Paper
Display Symbols
Keyboard
Diagrams
Keyboard Layout
Slide Switch
Features Key
Features
Date and Time Functions
Application Examples
Setting the Date and Time
Warranty
Extended Warranty
SPECIFICATION
Display
Printing Speed
Printing Paper
Power Sources
: 12 digits, fluorescent.
: 2.03 lines/second
: Width 58mm, (2.25inch)MAX
: 1) AC100V-
240V 2)
50/60Hz
Ambient Temperature : 0°~40°C
(32°~104°F) Power Consumption : 4.5W
Dimension
Ink Roller
Printing Color red) Weight
: 260mm(L) x 198mm(W) x 65mm(H)
: Tow color MS37901
: 2-Color (minus and negative in
: 750g
PREPARATION
A. Power source
This unit receives its operating power from the AC power source. When power is in ON position, pressing
[D/#] key will only print the digits displayed in the front
E2
panel.
B. Loading paper
1) Place paper holders into position (Fig. l).
2) Install the paper roll on the holders.
3) Insert the paper end into printer slot (Fig. II).
4) Press [ ] key to feed the paper to an adequate length.
E3
Fig. I
C. Replacing the ink roller
Fig. II
If the printing becomes faint, the ink roller may need to be replaced.
1) Turn the power off.
2) Open the printer cover (Fig. III).
3) Remove the old ink roller by pulling it up (Fig. IV).
4) Insert the new ink roller MS37901 in the compartment and gently press it down until it snaps into place.
Fig. III Fig. IV
CAUTION: Turn the power off before replacing ink roller.
E4
KEY IDENTIFICATION
OFF NP P IP
(OFF) Display OFF, whiles time/date memory will remain.
(NP P IP) Switch to choose Printer OFF, Printer ON or Printer item count mode.
∑ GT TAX SET
( ∑ ) The calculator automatically adds the result of multiplication/division to the Total register-no need to press + key each time. Obtain the multiplication/division
(GT) result by pressing = key.
Grand Total Memory selectable switch.
(TAX SET) Selects set mode for tax rate.
▲ 5/4 ▼
( ▲ )
(5/4)
( ▼ )
A 0 2 3 4 F
An answer is rounded up.
An answer is rounded off.
An answer is rounded down.
Decimal point
(A) accoutant , Fixed (0,2,3,4),(F)floating
E5
[0]~ [9] [00]
[.]
[+]
[-]
[×]
[÷]
[=]
[%±]
[MS]
[MT]
[M+]
[M-]
[D /# ]
[ ]
[ /S]
[C/CE]
[ ]
[ ]
[TAX+] or [TAX-]
[∆%]
: Numeral keys
: Decimal point key
: Add key
: Subtract key
: Multiplication key
: Division key
: Equal key
: Percent key
: Memory subtotal recall key
: Memory total clear key
: Memory plus key
: Memory minus key
: Date/Number key print key
: Paper feed key
: Subtotal key
: Clear last calculation/Clear last entry
: Back space key
: Inverts sign of the displayed number at
Key entry
: TAX+ Calculates the amount, using the stored rate, and adds it to the original price before tax
TAX- Calculates the amount of tax to be deducted (using the stored tax displayed value to find the pre-tax sales amount
Prints TAX / Included TAX
(TAX=3)
A TAX+ = A(3/100)
= A+(A(3/100))
Prints TAX / excluded TAX
(TAX=3)
A TAX- = A - A (1+3/100)
= A / (1+3/100)
: Prints difference (Computes the % of change between two values)
A ∆ % B = B - A
= (B - A) / A
A ∆ % B +/- = - (B + A)
= - (B + A) / A
[*/T] : Total key
[COST] [MARGIN] [SELL] :Used for calculating the cost,
E6
[GT] selling price and profit margin amount. Enter the value of any 2 items to obtain the balance value item. (e.g. enter the value of the cost and the selling price to obtain the profit margin.)
: In Grand total mode, adds the total register to the GT register by
[SET]
[AM/PM]
[12/24]
[FORMAT]
SLEEP MODE FUNCTION
Product powers down after 5 minutes of inactivity. To Wake the calculator, press the C/CE key for 5 seconds
DISPLAY SYMBOL
The (*/T) key
: Used to set the date and time in calendar & clock mode
: Used to switch between AM or PM at clock mode time setting
: Used to switch between 12 or 24 hour at clock mode time setting
: Used to select date format between “YYYY/MM/DD”,
“DD/MM/YYYY” or “MM/DD/YYYY” at calendar mode
M
E
–
: A number has been stored in memory
: Error or overflow of capacity
: The display value is negative
DATE AND TIME FUNCTION
The TIME/DATE key is used to display the
Time or Date.
Depressing the TIME/DATE key once displays the dateMM-DD-YYYY.
Depressing the TIME/DATE key a second time displays the time , HH-MM-SS.
When displaying the Date or Time the = key becomes a to enter or exit the date or time set mode .
E7
When displaying the Time the ÷ key becomes a key to toggle between the 12(AM/PM) or 24 hour clock mode.
When displaying the Time in the set mode the
× key becomes a key to toggle between AM and PM when in the 12 hour time mode.
Set Date and Time
1) Press TIME/DATE and then SET. (The first digit of the month will flash.)
2) Enter the month MM using the number keys. (The first digit of the date will flash.)
3) Enter the date DD using the number keys. (The first digit of the year will flash.)
4) Enter the year YYYY using the number keys. (The first digit of the month will flash.)
5) Press SET to confirm the date.
6) Press TIME/DATE and then SET . Enter the time using the number keys and press 12/24 to switch between 12-hour or
24-hour clock.
7) Press AM/PM to toggle morning or afternoon and press SET
To confirm the time.
Problem
How to set date:
Oct. 29, 2001
How to set time: a) 3:45AM b) 3:45PM c) 15:45
Operation
TIME
/
DATE
SET (Hold 3 seconds)
10
29
2001
SET
C/CE TIME TIME /
DATE
SET (Hold 3 seconds)
0 3 4 5
SET
SET (Hold 3 seconds)
AM/PM SET
12/24
Read-Out
MM-DD-YYYY
“M”M-DD-YYYY
10-“D”D-YYYY
10-29-“2”YYY
“1”0-29-2001
10-29-2001
HH-MM-SS A
“H”H-MM A
“0”3-45 A
03-45-00 A
“0”3-45 A
03-45-00 P
15-45-00
E8
DATE FORMAT: While displaying the date, depressing the %± key allows changingthe date format mode from MM-DD-YYYY to
DD-MM-YYYY or YYYY-MM-DD . The default date format is
MM-DD-YYYY .
REPLACING THE BACK-UP BATTERY:
1) Using a screwdriver remove the three screws on the back cover of the calculator.
2) To separate the front and back cover halves, carefully insert and twist a flat-blade screwdriver between them.
3) Use a flat-blade screwdriver to gently pry out the battery.
4) Position the new battery so the positive (+) side is up. Slide one edge of the battery under the tab on the battery holder, then press the battery into place.
5) Snap the cover halves back together. Then reinsert and tighten the screws.
NOTE : Memory backup battery retains the tax rate, calendar and clock setting, when the power is off or even when the AC cord is disconnected.
Battery: 1 Lithium battery (Type: CR 2032)
Battery life: Backup time 1000 hours
RESET :
Electromagnetic interference or electrostatic discharge may cause the display to malfunction or the contents of the memory to be lost or altered. Should this occur, use the tip of a ball point pen
(or similar sharp object) to press the [RESET] button on the bottom of the calculator. After resetting, be sure to set the tax rate, time and date again.
RESET
CAUTION:
Risk of Explosion if Battery is replaced by an Incorrect Type.
Dispose of Used Batteries According to the Instructions.
E9
PRÉFACE
Nous vous félicitons d'avoir choisi une calculatrice
électronique Victor. Son design soigné, ses matériaux de qualité, sa fabrication minutieuse ainsi que des installations de recherche et de production de pointe ont contribué à la conception d'une calculatrice qui, avec les soins appropriés, vous procurera des années de service sans problèmes. Afin de vous garantir un rendement futur optimal, informez-vous auprès de votre représentant Victor relativement à la protection, à faible coût, offerte par le Programme de protection de garantie prolongée.
Ce guide d'utilisation décrit les caractéristiques et les fonctions du Victor 1225-3A. Cette calculatrice comprend les fonctions suivantes : les quatre opérations de calcul arithmétique fondamentales, le total général, somme automatique, le pourcentage, la différence de pourcentage entre deux valeurs, le symbole de différence, le compte d'articles, les fonctions d'additions non datées, le taux d'imposition programmable, le rappel arrière et quatre touches de fonctions de mémoire.
F1
TABLE DES MATIÈRES
Fonctionnement et entretien général
Remplacement du rouleau encreur
Chargement du papier
Symboles d'affichage
Schéma du clavier
Disposition du clavier
Interrupteur à glissière
Description des touches
Exemples d'opérations
Réglage de la date et de l'heure
Garantie
Garantie prolongée
CARACTERISTIQUES
Affichage :12 chiffres, fluorescent
Vitesse d’impression : 2.03 lignes/seconde
Papier d’impression :Largeur de 58 mm.(2.25 pouces)
Alimentations :1) AC100V-240V
2) 50/60Hz
Température ambiante:0°~40°C (32°~104°F)
Consommation : 4.5W
Dimensions
Rouleau encreur
Impression
Poids
: 260mm(Long)×198mm(Larg.)×
65mm(H)
: MS37901 en deux couleurs
:En 2 (le moins et le négatif en rouge)
: 750 g
F2
PREPARATION
A.
Source d
'
alimentation
Cet appareil reçoit sa puissance de fonctionnement de
I’Alimentation CA.
Quand I'alimentation est dans la position ON
( MARCHE ) ,en appuyant sur la touche [D/#],on n’ imprime que les chifres affichés dans le panneau d’affichage avant.
B. Chargement du papier
1) Placez les porte-papier en position (Fig. I).
2) Installez le rouleau de papier sur les porte-papier
3) Introduisez l’extrémité du papier dans la fente de l’imprimante
(Fig. II).
4) Appuyez sur la touche [ ] pour introduire une longueur de papier suffisante.
Fig. I Fig. II
C. Remplacement du Rouleau encreur
Si l’impression devient a peine visible, le rouleau encreur peut avoir besoin d’être remplacé.
1) Mettez l’alimentation a l’arrkt.
2) Ouvrez le couvercle de l’imprimante (Fig. III).
3) Retirez l’ancien rouleau encreur en le tirant vers le haut (Fig. IV).
4) Introduisez le nouveau rouleau encreur MS37901 dans le compartiment et enfoncez-le doucement jusqu’a ce qu’il se mette en place d’un coup sec.
F3
Fig. III Fig. IV
ATTENTION : Arrktez l’alimentation avant de remplacer le rouleau encreur.
IDENTIFICATION DES TOUCHES
OFF NP P IP
( OFF ) ARR Ê T Affichage, tandis que la m heure / date est conserv é e .
é moire
( NP P IP ) Interrupteur pour choisir le mode ARR Ê T lmprimante , MARCHE lmprimante ou compte d ' articles lmprimante .
F4
∑ GT TAX SET
( ∑ ) La calculatrice djoute automatiquement le résultat de la multiplication/dicision au registre de total - aucun becun besoin d’appuyer chaque fois sur la touche+.Obteenez le résultat de la
(GT) multiplication/division en appuyant sur la
Touche=.
Commutateur de mémoire a choisir pour le Total
Général.
(TAX SET) Choisit le mode établi pour le taux d’imposition.
▲ 5/4 ▼
( ▲ )
(5/4) Une réponse est arrondie au chiffre inférieur.
( ▼ )
Une réponse est arrondie au chiffre supérieur.
Une réponse est arrondie au chiffre inférieur.
A 0 2 3 4 F
[0]~[9][00]
[.]
[+]
[-]
[×]
[÷]
[=]
[%±]
[MS]
[MT]
[M+]
[M-]
[D/#]
[ ]
[ ]
[ ]
[ ]
[C/CE]
: R é glage des d é cimales
(A) comptable, VIRGULE FIXE
(0,2,3,4),(F)Virgule flottante
:Touches num é riques
:Touches virgule d écimale
:Touches Ajouter
:Touches Soustraire
:Touches Multiplication
:Touches Division
:Touches Egalit é
:Touches Pour cent
:Touches Rappel de m émoire de sous-total
:Touches Effacement de m émoire de total
:Touches de m émoire plus
:Touches de m émoire moins
:Touches d’impression Date/num éro
:Touches d’entraonement du papier
:Touches de Sous-total
:Effacement/Effacement entr ére
:Touches de Rappel arrière
:Inverse le signe du nombre affiché a l’entrée de touche
F5
[TAX+]OR[TAX-]
[GT]
[*/T]
[ ]
[COCT][SELL][MARGN]
:Calcule le montant de la taxe, en utilisant le taux mémorisé et I’ajoute au prix d’origine avant taxe
:TAX-Calcule le montant de la taxe a dédiore (en utilisant le taux d’imposition mémorisé) et le soustrait de la valeur affichée pour trouver le montant des ventes avant taxe
:Imprime TAX / TAX lncluse
(TAX=3)
A TAX
+
= (3/100)
= A+ (A(3/100))
:Imprime TAX / TAX lncluse
(TAX=3)
A TAX
-
= A- A(1+3/100)
=A/ (1+3/100)
Utilisé pour calculer le montant du coûts, vendant et de la marge bénéficiaire. Entrez la valeur de 2
éléments,n’importe lesquels, pour trouver I’élément d’équilibrage(parexemple,entrez la valeur du coût et vendant pour obtenir la marge bénéficiaire.)
:En mode de Total général, ajoute le registre de total au registre GT par la touche(*/T)
:Touche de Total
:Imprime la différence (Calcule le
% de changement entre deux valeurs)
A ∆%B =B - A
=(B- A)/A
A ∆%B +/- =-(B+A)
=-(B+A)/A
FONCTION DE MODE SOMMEIL
Le produit s'éteint après 5 minutes d'inactivité. Pour réveiller la calculatrice, appuyez sur la touche C / CE pendant 5 secondes
F6
SYMBOOLES D’AFFICHAGE
M
E
: Un nombre a été mémorisé dans la mémoire
: Erreur ou dépassement de capacité
– : La valeur d’affivhage est négative
FONCTIONS DATE et HEURE
La touche TIME/DATE est utilis ée pour afficher
I’Heure ou la date. En appuyant sur la touche
TIME/DATE,on affiche la date MM-JJ-AAAA. En appuyant sur la touche TIME/DATE une deuxi è me fois, on affiche I’heure, HH-MM-SS.
Quand on affiche la Date ou I’Heure, la touche= devient une touche permettant d’introduire ou de quitter le mode de réglage de la date ou de I’heure.
Quand on affiche I’Heure, la touche ÷ devient une touche permenttant de basculer entre le mode d ' horloge de 12heures
( AM / PM ) [MATIN/APRÉS-MIDI]ou de 24 heures
Quand on affiche I’Heure dans le mode
“set”(réglage), la touche × devient une touche permettant de basculer entre AM (MATIN)et
PM(APRÈS-MID) dans le mode de I’heure.
Réglage de la Date et de l’Heure
1) Appuyer sur TIME/DATE et ensuite sur SET. (Le premier chiffre du mois clignotera.)
2) Entrer le mois MM en utilisant les touches numériques. (Le premier chiffre de la date clignotera.)
3) Entrer la date JJ en utilisant les touches numériques.
(Le premier chiffre de l’année clignotera.)
4) Entrer l’année AAAA en utilisant les touches numériques. (Le premier chiffre du mois clignotera.)
5) Appuyer sur SET pour confirmer la date.
6) Appuyer sur TIME/DATE et ensuite sur SET . Entrer l’heure en utilisant les touches numériques et appuyer sur 12/24 pour commuter entre l’horloge de 12 heures et celle de 24 heures.
F7
7) Appuyer AM/PM pour basculer sur le matin ou l’après-midi et appuyer sur SET pour confirmer l’heure. a) 3:45AM b) 3:45PM c) 15:45
Operation
TIME DATE
SET (Hold 3 seconds)
10
29
2001
SET
C/CE TIME TIME /
DATE
SET (Hold 3 seconds)
0 3 4 5
SET
SET (Hold 3 seconds)
AM/PM SET
12/24
MM
" M "
JJ
M -
AAAA
JJ AAAA
10 -" J " J AAAA
10 29 -" 2 " AAA
“1”0-29-2001
10-29-2001
HH-MM-SS A
“H”H-MM A
“0”3-45 A
03-45-00 A
“0”3-45 A
03-45-00 P
15-45-00
FORMAT DE LA DATE: Tout en affichant la date, en appuyant sur la touche %± , on permet de faire passer le mode de format de date de
MM-JJ-AAAA à JJ-MM-AAAA ou à AAAA-MM-JJ .Le format implicite est
MM-JJ-AAAA .
REMPLACEMENT DE LA PILE:
1) Enlevez les 3 vis au dos de la calculatrice à l’aide d’un tournevis à pjointe
Phillips.
2) Pour séparer le devant du dos, insérez avec soin la lame plate d’un tournevis entre les deux sections et tournez-la.
3) Utilisez un tournevis à lame plate pour soulever la pile.
4) Placez la nouvelle pile, côté positif (+) exposé. Glissez un bord de la pile sous la patte du support puis poussez la pile en place.
5) Enclenchez les deux sections du boîtier ensemble et remettez les vis.
NOTE : Pile de secours permettant de garder en mémoire, le tarif de TVA, les réglages du calendrier et de l’heure, lorsque l’appareil est éteint ou même lorsque le cordon secteur est débranché.
Pile: 1 pile lithuim (Type: CR 2032)
Durée de la pile: Heure de souper 1000
F8
RESTAURATION :
Des parasites électromagnétiques ou une décharge électromagnétique peuvent causer un mauvais fonctionnement de l’affichage ou la perte ou la modification du contenu de la mémoire. Si cela se produit, utilisez le bout d’un stylo à bille (ou d’un objet pointu semblable) pour appuyer sur le bouton
[RESET] à l’arrière de la calculatrice. Après la restauration, assurez-vous de régler à nouveau le taux d’imposition, l’heure et la date.
RESET
ATTENTION:
Risque d'explosion si la pile est remplacée par un type incorrect. Éliminer les piles usagées conformément aux instructions.
F9
PREFACIO
Felicitaciones, en su eleccioñ de una calculadora electronica
Victor. Con diseño cuidadoso, partes de calidad, habilidad esmerada, con investigación avanzada y facilidad de producciones te da una calculadora que con cuidado apropriado, proporcionará anos de servicio sin ningun problema. Y para asegurar el desempeño óptimo futuro, preguntele a su representante de Victor acerca de protección de bajo costo ofrecida por el programa prolongado de la protección de garantia de Victor.
Este manual operador describe las caracteristicas y operacion de la Victor 1225-3A. Esta calculadora tambien caracteriza las cuatro operaciones básicas de arithmetrica, suma total,sigma, porcentaje, cambio de porcentaje, cambio del signo, cuenta de articulos, funciones de suma de no fecha, imposición programmable, tecla para retroceder para atras, costo, venta, margen y cuatro teclas de funciones de memoria. La Victor 1225-3A tambien tiene caracteristicas de calendario y reloj.
S1
ÍNDICE DE MATERIAS
Operaciones y Conservación General
Reemplazando el Rodillo de Tinta
Cargando el Papel
Demuestre los Símbolos
Diagramas del Teclado
Disposición del Teclado
Deslice las Caracteristícas de Interruptor
Características Basicas
Funciones de Tiempo y Fecha
Ejemplos de Aplicacion
Colocación de Fecha y Tiempo
ESPECIFICACIONES
Pantalla : 12 dígitos, fluorescent.
Velocidad de impresión : 2.03 líneas/segundo
Papel de impresión : Width 58mm MÁX
Fuentes de Potencia : 1) AC100V-240V
2) 50/60Hz
Temperatura ambiente : 0°~40°C (32°~104°F)
Consumo de alimentación: 4.5w
Dimensiones
Cartucho de tinta
Peso
: 260mm(L) x 198mm(W) x 65mm(H)
: MS37901
: 2-Color ( positivas y negativas)
: 750g en dos colores Impresión rojo para las entradas
PREPARACIÓN
A. Fuente de potencia
Esta unidad recibe su poder operativo del CA Fuente de Power.
Cuando poder es en posición ON, apretando [D/#] tecla sólo imprimirá los dígitos desplegaron en el tablero del despliegue delantero.
B. Carga del papel
1) Coloque los soportes del papel en su posición (Fig. I).
2) Introduzca el rollo de papel en los soportes.
S2
3) Introduzca el extremo del papel en la ranura de la impresora
(Fig. II).
4) Pulse la tecla [ adecuada.
] para hacer avanzar el papel la longitud
Fig. I Fig. II
C. Sustitución del cartucho de tinta
Si la impresión no es nítida, puede que tenga que sustituir el cartucho de tinta.
1) Apague la alimentación.
2) Abra la cubierta de la impresora (Fig. III).
3) Retire el cartucho de tinta usado tirando de éste hacia arriba
(Fig. IV).
4) Introduzca el nuevo cartucho de tinta MS37901 en el compartimiento y presiónelo ligeramente hacia abajo hasta que haga un chasquido al colocarse.
Fig. III Fig. IV
PRECAUCIÓN
: apague la alimentación antes de cambiar el cartucho de tinta.
S3
IDENTIFICACIÓN DE TECLAS
OFF NP P IP
· (OFF) Pantalla APAGADA (OFF), mientras que la memoria hora/fecha permanecerá.
· (NP P IP) Interruptor para escoger Impresora APAGADA
(OFF), Impresora ENCENDIDA (ON), o modo de recuento de artículos de Impresora.
∑ GT TAX SET
·
· ( ∑ ) La calculadora añade automáticamente el resultado de multiplicación/ división al registrador de total -- no es necesario presionar la tecla + cada vez. Se obtiene el resultado de
· (GT) multiplicación/división presionando la tecla =.
Interruptor seleccionable de Memoria de Total General.
· (TAX SET) Selecciona modo fijar para tasa de impuestos.
▲ 5 / 4 ▼
· ( ▲ )
· ( 5/4 )
· ( ▼ )
El resultado se redondea por exceso.
El resultado se redondea .
El resultado se redondea por defecto.
S3
A 0 2 3 4 F
[0]~[9][00]
[.]
[+]
[-]
[×]
[÷]
[=]
[%±]
[MS]
[MT]
[M+]
[M-]
[D/#]
[ ]
[ ]
[C/CE]
[ ]
[ ]
[TAX+]OR[TAX-]
[COCT][SELL]
[MARGN]
: Grupo decimal
( A ) contable , fijo ( 0 , 2 , 3 , 4 ) (F)
Flotante
:Telas numéricas
:Tecla punto decimal
:Tecla suma
:Tecla sustracción
:Tecla multiplicación
:Tecla dicisión
:Tecla igual
:Tecla porcentaje
:Tecla rellamada memoria subtotal
:Tecla borrar memoria total
:Tecla menoria menos
:Tecla impresión fecha /tecla numérica
:Tecla avance papel
:Tecla subtotal
:Tecla subtotal
:Borrar todo /Tecla borrar
:Tecla retroceso
:Incierte el signo del número indicado al pulsarl la tecla
: TAX+Calcula la cantidad de
Impuestos, empleando el tipo almacenado, y la añade al precio original antes de los impuestos
: Imprime TAX / Incluido TAX
(TAX=3)
A TAX+ = A (3/100)
=A+ (A(3/100))
:Imprime TAX /Incluido TAX
(TAX=3)
A TAX+ =A- A(1+3/100)
=A/(1+3/100)
:Usado para calcular el coste, precio de centa y cantidad de margen de ganancia. Introduzca el calor de 2 artículos cualquiera para obtener el artículo de valor de saldo.
(por ejemplo, intoduzca el valor del
Coste y el precio de venta para obtener la margen de ganancia.)
S4
[GT]
[*/T]
[ ]
: En modo total general, añade el registrador de total al registrador be total General (TG) por medio de la
Tecla(*/T)
: Imprime la diferencia (calcula el % de cambio entre dos valores)
A ∆%B = B- A
=(B-A)/A
A ∆%B +/- =-(B+A)
=-(B+ A)/A
FUNCIÓN DEL MODO DE SUEÑO
El producto se apaga después de 5 minutos de inactividad.
Para despertar la calculadora, presione la tecla C / CE durante 5 segundos
SÍMBOLO PANTALLA
M
E
-
:Se ha almacenado un número en la
Memoria
:Error o capacidad desbordada
:El valor indicado es negativo
FUNCIONES DE FECHA y HORA
La tecla TIME/DATE se utiliza paara mostrar la fecha o hora. Al pulsar la tecla TIME/DATE se indica la fecha MM-
DD AAAA .
AI pulsar de nuevo la tecla
TIME / DATE se muestra entonces la hora ,
HH MM SS .
Cuando se muestra la fecha o la hora, la tecla= pasa entonces a tener la función de acceder o salir o salir del modo para fijar la fecha ola hora.
Cuando se muestra la hora, la tecla÷pasa entonces a tener la función de cambiar entre el modo de reloj de 12 horas(AM/PM) o modo reloj de 24horas.
Cuando se muestra la hora en el mode fijar,
La tecla × pasa a tener la función de cambiar entre AM y PM en el modo 12horas.
S5
Fijar fecha y hora
1) Pulse TIME/DATE y después SET. (Parpadea entonces el primer dígito del mes.)
2) Introduzca el mes MM utilizando las teclas numéricas.
(Parpadea el primer dígito de la fecha.)
3) Introduzca el día DD utilizando las teclas numéricas.
(Parpadea el primer dígito del año.)
4) Introduzca el año YYYY (AAAA) utilizando las teclas numéricas.
(Parpadea el primer dígito del mes.)
5) Pulse SET para confirmar la fecha.
6) Pulse TIME/DATE y después SET . Introduzca la hora utilizando las teclas numéricas y pulse 12/24 para cambiar entre el reloj de 12 horas y el de 24.
7) Pulse AM/PM para cambiar entre mañana y tarde y pulse SET para confirmar la hora.
Problem
How to set date:
Oct. 29, 2001
How to set time: a) 3:45AM b) 3:45PM c) 15:45
TIME /
DATE
SET (Hold 3 seconds)
10
29
2001
SET
C/CE TIME TIME /
DATE
SET (Hold 3 seconds)
0 3 4 5
SET
SET (Hold 3 seconds)
AM/PM SET
12/24
MM
-
DD
-
AAAA
"
M
"
M
-
DD
-
AAAA
10
-
29
"
2
"
-AAA
10-29-“2”YYY
“1”0-29-2001
10-29-2001
HH-MM-SS A
“H”H-MM A
“0”3-45 A
03-45-00 A
“0”3-45 A
03-45-00 P
15-45-00
FORMATO DE FECHA: Mientras que se muestra la fecha, apretando la tecla %± permite cambiar el modo de formato de la fecha de MM-DD-AAAA a DD-MM-AAAA o AAAA-MM-DD .
El formato por defecto es MM-DD-AAAA .
S6
Substituyendo la Batería de Reserva:
1) Utilizando un destornillador retire los tres tornillos en la cubierta localizada detrás de la calculadora .
2) Para separar las mitades de la cubierta del frente y de la parta posterior, inserte y tuerza cuidadosamente el destornillador plano de paleta entre las dos.
3) Utilice un destornillador plano de paleta para deslizar suavemente la bateria.
4) Coloque la batería con el lado positivo(+) para arriba.
Resbale un borde de la bateria debajo de la etiqueta en el sostenedor de la batería,después presione la batería en su lugar.
5) Encaje a presión las mitades de la cubierta detrás juntas, despué reinserte y apriete los tornillos.
NOTA: La bateria de seguridad de la memoria conserva la carga y el ajuste del calendario y del reloj cuando se interrumpe la alimentación o incluso cuando se desconecta el cable de CA.
Pila:1 pila de titio (Type:CR 2032)
Duración de la pila:Tiempo de backup 1000 horas.
CONFIGURAR DE NUEVO:
Interferencia electromagnética o descarga electromagnética pueden causar que la pantalla funcione defectuosamente o que los contenidos de la memoria se pierdan o queden alterados. Si esto ocurre, use la punta de una pluma esferográfica (uobjeto agudo similar) para presionar el botón [RESET](RECONFIGURAR) en la parte posterior de la calculadora. Despué de configuraar de nuevo, asegúrese de fijar la tasa de impuestos, hora y fecha de nuevo.
RESET
PRECAUCIÓN:
Riesgo de explosión si la batería se sustituye por un tipo incorrecto.
Deseche las baterías usadas de acuerdo con las instrucciones.
S7
OPERATION EXAMPLES
EXEMPLES D'OPERATIONS
EJEMPLOS DE FUNCIONAMIENTO
[OFF/NP/P/IP] = P , [ [ ∑ / GT , [•
[A/0/2/3/4/F] = F
5/4T ] = DON'T CARE
A. Four fundamental arithmetic calculations
Quatre calculs arithmetiques fondamentaux
Cuatro calculos aritmeticos fundamentales
Example
Exemple
Ejemplo
(24+36-75)x8+(-9)
=13.3333333333
Operation
Operation
Operaciones
24 +
36
75 -
+
X
8
9
+:
=
Display
Affichage
Pantella
24.
60 .
15 .
-15.
-120 .
-9 .
13 .
3333333333
B. Constant multiplication and division calculation
Calcul de Multiplication et Division par une Constante
Multiplicaci6n y division por una constante
Printing-out
Impression lmpresi6n
24 . +
36 . +
75 . -
-15.
X
8.
-9 . =
13.3333333333 +
Example
Exemple
Ejemplo a) 25 X 3 = 75
25 X 4 = 100
25 X 5 = 125
300 b) 36 + 4 = 9
136 + 4 = 34
236 + 4 = 59
102
Operation
Operation
Operaciones
C / CE
25
3
4
5
X
=
=
=
*IT
36
4
136
236
=
=
=
*IT
Display
Affichage
Pantella
0.
25.
75 .
1 00 .
125.
300 .
36 .
9.
34.
59.
102.
Printing-out
Impression lmpresi6n
0. C
25 . X
75
3 .
.
4 .
100
5 .
.
=
=
=
+
125 . +
300. *
36.
4 .
9 .
=
136 .
34
236 .
.
=
=
59 . +
102 . *
1
C. Percentage calculation
Calcul de pourcentage
Calculo de porcentaje
Example
Exemple
Ejemplo a) 500x14 .
2%=71 b) 500x(1+14.2%)=571 c) 500x(1-14 .
2%)=429
Operation
Operation
Operaciones
5QO
14 .
2
X
% ±
500
14.2
%
X
% ±
+
5QO
14 .
2
%
X
% ±
Display
Affichage
Pantella
500.
71.
500 .
71.
571.
500.
71 .
429.
Printing-out
Impression lmpresi6n
500 .
X
14 .
2 %
71 . +
500 . X
14.2 %
71 . +
571 . +%
500 . X
14.2 %
71 . +
429. -%
D. Memory calculation
Calcul avec Mise en Memoire
Calculo de la memoria
Example
Exemple
Ejemplo
Operation
Operation
Operaciones
(8732x3)-(42730+32) 8732
X
=24860.6875
3 M+
42730
32 M-
MS
MT
E. Correcting mistaken entry
Correcti on d'une entree erronee4
Correcci6n de una entrada err6nea
M
M
M
M
Display
Affichage
Pantella
Printing-out
Impression lmpresi6n
8'732.
26'196.
8,732.
X
3. =
26,196 . M+
42,730 .
1
42730.
'335.3125
32. =
1,335.3125 M-
24'860.6875
24,860.6875 M O
24'860.6875
24,860 .
6875 M*
Example
Exemple
Ejemplo
123+455=578
Operation
Operation
Operaciones
123 +
456 CE
455 +
*IT
Display
Affichage
Pantella
123.
0.
578.
578.
Printing-out
Impression lmpresi6n
123. +
455. +
578. *
2
F. Decimal select
Choix de la virgule decimale
Selecci6n del decimal
Example
Exemple
Ejemplo
[•5l4T]
[AO 2 3 4 F] = F
1 .
4231 X 3 = 4 .
2693
[AO 2 3 4 F]
123x5=615
= 4
123+5=128
Print date 98/10/10
[•5l4T]=5/4
[AO 2 3 4 F] = 2
[AO 2 3 4 F] = 0
[OFF/NP/P/IP] = IP
[A0234F]=A
3.13+0.05+4.56+6.00
=13.74
Operation
Operation
Operaciones
1.4231
3
X
=
123
5
X
=
C
123 +
5 +
/ CE
*IT
98.10 10 + / -
#
#/P
1.4231
3 x
=
1.4231
3 x
=
C
313 +
5 +
456 +
600 +
*IT
Display
Affichage
Pantella
4
615
.
.
1.4231
2693
123
0000
.
Printing-out
Impression lmpresi6n
1.4231
X
3. =
4 .
2693 +
123.
X
5. =
615 .
0000 +
0.
123 .
0000
128 .
0000
128 .
0000
0 . C
123 .
0000 +
5 .
0000 +
128.0000 *
-98 .
1010 #98.10 10 ...
....
1.4231
4.27
1.4231
4.
1.4231 X
3 . =
4 .
27 +
1.4231
X
3 . =
4 . +
0.
3.13
3.18
7.74
13 .
74
13 .
74
0 . C
3 .
13 +
0 .
05 +
4 .
56 +
6 .
00 +
004 ......
.
....
.
....
13 .
74 *
3
3 ÷ 7X2 = 0 .
85714285714
3 ÷ 7X2 = 0 .
858
3 ÷ 7X2 = 0 .
86
3 ÷ 7X2 = 0 .
85
4
Subtotal C
Sous total C
C / CE 0 .
0. C
I. Business sales calculation
Gesch-ftliche Verkaufskalkulation
Cálculo de Ventas Comerciales
Example
Beispiel
Ejemplo
Calculating Cost
Selling Price: $1,500
Profit Margin: 30%
Cost = 1,050 ($1,050)
Calculating Selling Price
Cost: $2,000
Profit Margin: 20%
Selling Price=2,500($2,500)
Calculating Profit Margin
Cost: $1,500
Selling Price: $2,000
Profit Margin=25(25%)
Operation
Bedienung
Ingreso
1500 SELL
30 MARGIN
2000 COST
20 MARGIN
1500 COST
2000 SELL
Display
Anzeige
Pantella
SELL
COST
1’500.
1’050.
COST
SELL
2’000.
2’500.
COST
MARGIN%
1’500.
25.
Printing-out
Druck
Impresion
1,500. *
30. M%
1,050. CC
2,000. CC
20. M%
2,500. ** *
1,500. CC
2,000. ** *
25. M%
5
J. L% key operation example
Exemple du fonctionnement de la touche
Ejemplo de operaci6n de la tecla L%
6%
Example
Exemple
Ejemplo
2 3 =50
2 3 =-250
Operation
Operation
Operaciones
2
3
2
3
6 %
6
+
Display
Affichage
Pantella
2 .
50 .
2 .
-3 .
-250 .
Printing-out
Impression lmpresi6n
2.
3. =
50. ∆
L
1 . 6 *
%
2.
-3. =
-250. ∆
L
-5 . D.
*
+
K. Adds the total register to the GT register by the (*/T) key
Ajoute le registre de total au registre GT a l'aide la touche (*/T)
Adicion del total al registro de GT con la tecla (*/T)
Example
Exemple
Ejemplo
CLEAR GT MEMORY
EFFACER GT MEMOIRE
BORRAR MEMORIA GT
[AO 2 3 4 F] = F
[OFF/NP/P/IP] = P
[S/GT/TAX SET] =GT
A=2+3 =5
+}B = -3 - 4 - 5 = -12
GT1 =A+B=-7
GT2=A+B=-7
GT3 = A+ B = 0
Operation
Operation
Operaciones
3
4
5
2
3
C C CE
GT
GT
+
+
*IT
*IT
GT
GT
GT
Display
Affichage
Pantella
-12 .
-12 .
-7 .
-7 .
0 .
5.
5.
-3.
-7.
0.
0.
0.
2.
Printing-out
Impression lmpresi6n
0 . C
0. G ◊
0. G*
2. +
3. +
5. G+
3.
4.
5.
-12. G+
-7. G ◊
-7. G*
0. G
6
L. Calculate included TAX or excluded TAX operation
Operation de calcul avec TAXE incluse ou TAXE exclue
Operaciones de calculo de impuestos impHcitos 6 explicitos
Example
Exemple
Ejemplo
[ [ S /GT/TAX SET]
=TAX SET
Enter rate (3%)
Entrer le toux (3%) lntroducir tipo (3%)
[ /GT/TAX SET] = Σ
Tax included
Taxe comprise lmpuesto incluido
$1560@3%
Tax excluded
Taxe exclue
Sin impuestos
$1606.80@3%
Operation
Operation
Operaciones
3
1560
TAX+
1606 .
80
TAX-
Display
Affichage
Pantella
0 .
3 .
0 .
Printing-out
Impression lmpresi6n
0. %
3. %
1 ' 560
1 ' 606 .
8
1,560 .
3 . %
46.8 ◊
1 , 6 06.8 *
1 ' 606 .
80
1 ' 560
1,606.80
3 . %
-46.8 ◊
1,560. *
7
M
.
Overflow
Dépassement
Sobrante
Example
Exemple
Ejemple
123456789×78900
=
9740740652100
( ERROR )
Operation
Opération
Operaciones
123456789
78900
×
=
E
Read -
Lectura out
Affichage
123 ' 456 ' 789 .
974 .
0740652
Printing out
Impression
Impresión
123 ' 456 ' 789 .
×
78 , 900 .
=
***********
974 .
0740652 *
9999999999
( And to
Memory )
123
( Add to Memory )
6 ÷ 0 = 0
¯
( ERROR )
9999999999 M+
123 M+
6
0
M
M
E
C / CE
MT
÷
=
M
E
C
/
CE
9
'
999
'
999
'
9 9 ' 999 ' 999 ' 999 .
M
1
.
000000012
123
.
M+
*************
9
'
999
'
999
'
999
0 .
9 ' 999 ' 999 ' 999 .
M
6
.
0
.
*************
6 .
÷
0 .
=
0
.
*
0
.
0
.
C
8
Do not press any key when there is no paper and the printer is on.(other than the paper feed key )
Failure to observe this warning will damage the print head.
N’appuyez sur aucune touche lorsqu’il n’y a pas de paiper et que I’imprimante est en marche (autre touche que la touche de I'alimentation en papier ).
En manquant d’observer cet avertissement, on endommage la tête d’impression.
No pulse ninguna tecla si no hay papel y la impresora está encendida (a menos que pulse la tecla de avance del papel ).
De lo contrario resultará dañado el cabezal de impresión.
9
Y
To register your warranty please emails us your registration through our website or by emailing it to [email protected].
Pour enregistrer votre garantie, envoyez-nous votre inscription par l'intermédiaire de notre site
Web ou par courrier électronique à [email protected].
Para registrar su garantía, envíenos por correo electrónico su registro a través de nuestro sitio web o enviándolo por correo electrónico a [email protected].
Corporate Office and National Service Center:
Victor Technology
100 E. Crossroads Parkway
Suite C
Bolingbrook, IL 60440
Phone: 630-754-4400
Fax: 630-972-3920
Website: www.victortech.com

Public link updated
The public link to your chat has been updated.
Advertisement