Reely 396209 Model ship brushed speed control Instructions
Reely 396209 is an electronic speed controller (ESC) for brushed motors in RC cars. It offers easy operation with automatic neutral point setup and audible feedback. The ESC provides forward, brake, and reverse functions, with proportional control of backward speed. It features a built-in 5V 1A BEC, handles up to 300A spark current, and is suitable for 540/50T motors and above. The compact size (35 x 33 x 30mm) and light weight (48.2g) make it ideal for various RC car applications.
PDF
Download
Document
Advertisement
Advertisement
This ESC is set up in a simple way for easy operation. When switched on, it automatically searches the neutral point When the automatic setup is finished, the motor sends out "DO" "RE" "MI" music indicating it snatches the neutral point Its easy to operate. SPECIFICATIONS: A INPUT: 6V-68.4V DC A BEC:5V 1A à Curent Drain:20A(forward),Max(spark):300A;150A(back,spark) A Size: 35mmíL) X 33mm(W) X 30mm(H) Weight: 48.2g A Applicable: 540/50T motor and above. Wire diagram: у Motor connector Reverse connectors if the motor works a in the wrong direction (Red) (Black) (Black) = = Battery connector Not :red is "+", and black is "+" (Red) Receiver connector К It will be connected to the receiver throttle channel Pe Connect all wires according to the diagram, then switch on the radio. (Put to default setting for Programmable Radio] Switch on the power of the ESC, and you'll hear "DO, RE, MI" music. The music indicates that the transmission is on, anc the neutral point is set up. If the motor does not stop running a short while after the neutral point is set, please switch of the ESC and then switch it on again to get the neutral point. FUNCTIONS: Warning: A Forward: push the throttle on the radio (For gun-type radio, trigger the throttle), the car goes forward, This ESC is not water-proof. Water « should be avoided. If water goes A Brake: put the throttle to REVERSE to brake the car; into it, take down the power switch, and use a blower to dry the ESC A Reverse: put the throttle to REVERSE when the car is not running, at medium temperature, then the car will run backward. Backward speed can be proportion test it again. ally controlled by adjusting the throttle. During backward running, when the throttle is pushed forward, the motor will run reversely. A It's dangerous to touch the motor This will brake the car temporally. after running, as it emits heat during running, and the cooling plate is A LED indicator is always on during forward, reverse and brake hot after running. mode. When the ESC is not working and the car stops, LED indicator is off. When the radio is switched off, LED indicator on the ESC flashes. ">
![](http://s3.manualzz.com/store/data/053346912_1-d7a1fb2f4c2e121cba5197e912c6f224-210x147.png)
Advertisement