advertisement
The Quick Guide is not intended as a substitute for your Owner’s
Manual . We strongly encourage you to review the Owner’s
Manual and supplementary manuals so you will have a better understanding of your vehicle’s capabilities and limitations.
Audio System*
...................................................................................................................... 47
Brake Hold .............................................................................................................................................43
..............................................................................................................57
......................................................................................................................87
...................................................................................................................................... 51
...........................................................................................................................................104
........................................................................................................... 41
............................................................................................................... 30
Dynamic Radar Cruise Control with Full-speed Range
..................................................53
Energy Monitor/Consumption Screen
..................................................................................... 14
....................................................................................................................................39
................................................................................................................................................49
Front Air Conditioning System*
.............................................................................................................................................20
......................................................................................................................................106
......................................................................................................................95
*: This feature may be operated by Voice command (See P.92)
1
LS600hL_QG_U
Hands-free System For Cellular Phone*
phone pairing........................................................................................................... 71
.............................................................................................................................................. 46
..................................................................................................................86
........................................................................................................................................................107
........................................................................................................................................12
.......................................................................................................................... 39
.................................................................................................................. 33
..................................................................................................................... 56
............................................................................................................................................................. 17
.............................................................................................................. 82
Lexus Enform with Safety Connect
........................................................................................... 99
................................................................................................................................ 60
..................................................................................................................102
...........................................................................................................58
........................................................................................................................................... 106
.............................................................................................................. 44
........................................................................................................... 34
........................................................................................................................................42
..........................................................................................................81
.................................................................................................................... 36
................................................................................................................................. 23
................................................................................................................................. 105
*: This feature may be operated by Voice command (See P.92)
2
LS600hL_QG_U
...........................................................................................................32
Rear Sunshade/Rear Door Sunshades
................................................................................... 90
Rear Window and Outside Rear View Mirror Defoggers
............................................. 50
.......................................................................................................................................63
.................................................................................................................................... 97
................................................................................................................................................34
Smart Access System with Push-button Start
........................................................................18
....................................................................................................................................33
.................................................................................................................... 19
......................................................................................................62
........................................................................................................................................................108
...................................................................................................49
*: This feature may be operated by Voice command (See P.92)
3
LS600hL_QG_U
LS600hL_QG_U
4
5
Overview
Instrument Panel
Windshield wiper and washer switch
Multi-information display
Headlight switch
Fog light switch
Turn signal lever*
Inside lock buttons
Trunk opener
Fuel Filler door opener
Driving position memory switches
Shoulder anchor control switches
Window lock switch
Power window switches
Door lock switches
Hood lock release lever
Pre-collision braking off switch
*
Tire pressure warning reset switch
LS600hL_QG_U
Odometer/trip meter and trip meter reset switches*
Lexus night view switch
Remote Touch screen
Navigation system
Clock*
Rear window and outside rear view mirror defoggers
Air conditioning system
Trunk opener main switch
Parking brake switches
Audio system
Emergency flasher switch*
Power switch
: If equipped
*
: Refer to “Owner’s Manual”.
6
LS600hL_QG_U
Overview
Instrument Panel
Audio remote control switches
“DISP” button
Telephone switches
Talk switch
Back switch
Brake hold switch
Tilt and telescopic steering control switch
LKA (Lane-Keeping Assist) switch
Cruise control switch
Vehicle-to-vehicle distance button
7
LS600hL_QG_U
Outside rear view mirror switches
Instrument panel light control switches*
Headlight cleaner switch*
Automatic High Beam switch
Intuitive parking assist switch
BSM (Blind Spot Monitor) main switch
Heated steering wheel switch
: If equipped
*
: Refer to “Owner’s Manual”.
8
LS600hL_QG_U
Overview
Instrument Panel
Snow mode switch *1
EV drive mode switch
Shift lever
Driving mode select switch
Vehicle height adjustment switch *1
Remote Touch
9
LS600hL_QG_U
Rear sunshade switch
*2
Rear door sunshade switches *2
Front climate control seat switches
*2
Rear seat return switch *2
Front passenger’s power seat switches
*2
VSC (Vehicle Stability Control) OFF switch
*1
: If equipped
*
1
: Refer to “Owner’s Manual”.
*
2
: Location of the switches varies according to the vehicle grade level.
Overview
Roof
Interior light*
Personal lights*
Moon roof switches
Vanity lights*
LS600hL_QG_U
“SOS” button
Garage door opener switches
Inside rear view mirror
: If equipped
*
: Refer to “Owner’s Manual”.
10
Overview
Rear Armrest
Rear air conditioning switches
Rear audio switches
Rear sunshade switch
Rear door sunshade switches
11
LS600hL_QG_U
Power rear seat switches*
Front passenger's seat control switches
*
Pelvic support seat switches*
Rear climate control seat switches
: If equipped
: Location of the switches varies according to the vehicle grade level.
Hybrid System
Your vehicle is a hybrid vehicle. It has characteristics different from conventional vehicles.
Be sure you are closely familiar with the characteristics of your vehicle, and operate with care.
The hybrid system combines the use of a gasoline engine and an electric motor (traction motor) according to driving conditions, improving fuel efficiency and reducing exhaust emissions.
For details, refer to the “Owner’s Manual”.
■
Hybrid System Indicator
4
1
2
3
Charge area
Shows regenerative charging.
Hybrid Eco area
Shows that gasoline engine power is not being used very often.
The gasoline engine will automatically stop and restart under various conditions.
Eco area
Shows that the vehicle is being driven in an Eco-friendly manner.
Power area
Shows that an Eco-friendly driving range is being exceeded (during full power driving etc.)
● Hybrid System Indicator is displayed when the driving mode is other than the sport mode.
● By keeping the indicator needle within Eco area, more Eco-friendly driving can be achieved.
● Charge area indicates regeneration
*
status. Regenerated energy will be used to charge the battery.
*
: When used in this manual, “regeneration” refers to the conversion of energy created by the movement of the vehicle into electrical energy.
12
LS600hL_QG_U
■
Charging the hybrid battery (traction battery)
● If the shift lever is in N, the hybrid battery (traction battery) will not be charged. Always put the shift lever in P when the vehicle is stopped. When driving in heavy traffic, operate the vehicle with the shift lever in D or S to avoid discharging the battery.
● To help prevent the 12-volt battery from becoming discharged, drive the vehicle at least once a month, and operate the accessories only when the “READY” indicator is on.
When parking the vehicle, make sure the doors and trunk are closed and all lights are turned off.
■
Regenerative braking
In the following situations, kinetic energy is converted to electric energy and deceleration force can be obtained in conjunction with the recharging of the hybrid battery (traction battery).
● The accelerator pedal is released while driving with the shift position in D or S.
● The brake pedal is depressed while driving with the shift position in D or S.
■
Sounds and vibrations specific to a hybrid vehicle
There may be no engine sounds or vibration even though the vehicle is able to move. For safety, apply the parking brake and make sure to shift the shift lever to P when parked.
The following sounds or vibrations may occur when the hybrid system is operating and are not a malfunction:
● Motor sounds may be heard from the engine compartment.
● Sounds may be heard from the hybrid battery (traction battery) behind the rear seats when the hybrid system starts or stops.
● Sounds from the hybrid system may be heard when the trunk lid is open.
● Sounds may be heard from the hybrid transmission when the hybrid system starts or stops.
● Engine sounds may be heard when accelerating sharply.
● Sounds may be heard due to regenerative braking when the accelerator pedal is released or the brake pedal is depressed.
● Vibration may be felt when the gasoline engine starts or stops.
● Cooling fan sounds may be heard from the air intake vents on the package tray.
■
Running out of fuel
When the vehicle has run out of fuel and the hybrid system cannot be started, refuel the vehicle with at least enough gasoline to make the low fuel level warning light go off. If there is only a small amount of fuel, the hybrid system may not be able to start. (The minimum amount of fuel to add to make the low fuel level warning light go out is about 3.4 gal. [13 L,
2.8 Imp. gal.], when the vehicle is on a level surface. This value may vary when the vehicle is on a slope.)
13
LS600hL_QG_U
Energy Monitor/Consumption Screen
You can view the status of your hybrid system on the multi-information display and the
Remote Touch screen.
■
Energy monitor
● How to display on the Remote Touch screen
Vehicles without a navigation system
1 Press the “MENU” button on the Remote Touch.
2 Select “Info” on the “Menu” screen.
If the “Trip Information” or “Past Record” screen is displayed, select “Energy”.
The “Energy Monitor” screen can be displayed on the “Side Display”. For details, refer to the “Owner’s Manual”.
Vehicles with a navigation system
1 Press the “MENU” button on the Remote Touch.
2 Select “Info/Apps” on the “Menu” screen.
3 Select “Fuel Consumption” on the “Information” screen.
If the “Trip Information” or “Past Record” screen is displayed, select “Energy”.
The “Energy Monitor” screen can be displayed on the “Side Display”. For details, refer to the “Owner’s Manual”.
The flow of energy is displayed on the Remote Touch screen.
Amber: gasoline energy
Yellow: electrical energy
Light blue: energy recovery
A light blue arrow appears when regenerative braking occurs.
● How to display on the multi-information display
Press the “DISP” button on the steering wheel several times to select the energy monitor display.
The flow of energy is indicated by the movement of the arrows on the multi-information display.
The displayed energy flow, battery level, etc. will change in response to the current driving conditions.
14
LS600hL_QG_U
■
Consumption
The consumption screen can be displayed on the “Side Display”. For details, refer to the
“Owner’s Manual”.
Vehicles without a navigation system
1 Press the “MENU” button on the Remote Touch, then select “Info” on the “Menu” screen.
2
1
If the “Energy Monitor” screen is displayed, select “Fuel Consumption”.
Vehicles with a navigation system
Press the “MENU” button on the Remote Touch, then select “Info/Apps” on the “Menu” screen.
2
3
Select “Fuel Consumption” on the “Information” screen.
If the “Energy Monitor” screen is displayed, select “Fuel Consumption”.
● Trip information
If the “Past Record” screen is displayed, select “Trip Information”.
1
2
3
Resetting the consumption data
Fuel consumption in the past 15 minutes
Regenerated energy in the past 15 minutes
4
5
Displays the average vehicle speed since the hybrid system was started.
Displays the elapsed time since the hybrid system was started.
6 Cruising range
● Past record
If the “Trip Information” screen is displayed, select “Past Record”.
1
4
5
2
3
Updating the average fuel consumption data
Resetting the past record data
Best recorded fuel consumption
Average fuel consumption
Previous fuel consumption record
15
LS600hL_QG_U
■
Hybrid warning message
A message is automatically displayed when a malfunction occurs in the hybrid system or an improper operation is attempted.
If a warning message is shown on the multiinformation display, read the message and follow the instructions.
LS600hL_QG_U
16
Keys
■
Electronic key
■
Mechanical key
Card key*
Smart access system with push-button start
(
Wireless remote control (
*
: If equipped
To take out the mechanical key:
Electronic keys: Slide the release lever and take the key out.
Card key: Press the lock release button and take the key out.
After using the mechanical key, store it in the electronic key. Carry the mechanical key together with the electronic key. If the electronic key battery is depleted or the entry function does not operate properly, you will need the mechanical key.
17
LS600hL_QG_U
■
Wireless remote control
2
1
3
4
Locks all the doors
Unlocks all the doors
Pressing the button unlocks the driver’s door. Pressing the button again within
3 seconds unlocks the other doors.
Opens the windows and moon roof
(press and hold)
*
Opens the trunk (press and hold)
The trunk lid automatically opens fully.
5 Sounds the alarm (press and hold)
*
: This setting must be changed using the customize function.
Smart Access System with Push-button Start
The following operations can be performed simply by carrying the electronic key
(including the card key) on your person, for example in your pocket. (The driver should always carry the electronic key.)
For details on starting the hybrid system, see page 36.
■
Entering the vehicle
Grip the driver’s door handle to unlock the door. Grip the passenger’s door handle to unlock all the doors.
Make sure to touch the sensor on the back of the handle.
The doors cannot be unlocked for 3 seconds after the doors are locked.
■
Exiting the vehicle
Press the lock button to lock the door.
Pressing and holding the button closes the windows and moon roof.
18
LS600hL_QG_U
■
Opening the trunk
Press the button.
The trunk lid automatically opens fully.
For details on what to do when the electronic key does not operate properly, see page 112.
Theft Deterrent System
■
Immobilizer system
The indicator light flashes after the power switch has been turned off to indicate that the system is operating.
The indicator light stops flashing after the power switch has been turned to ACCES-
SORY or ON mode to indicate that the system has been canceled.
■
Alarm
The alarm uses light and sound to give an alert when an intrusion is detected.
To set the alarm:
Close the doors, trunk and hood, and lock all the doors. The system will be set automatically after 30 seconds.
The indicator light changes from being on to flashing when the system is set.
To deactivate or stop the alarm:
● Unlock the doors or open the trunk.
● Turn the power switch to ACCESSORY or ON mode, or start the hybrid system. (The alarm will be deactivated or stopped after a few seconds.)
19
LS600hL_QG_U
Front Seats
■
Adjustment procedure
Passenger’s seat Driver’s seat
1
4
5
2
3
6
7
Seat position adjustment switch
The height of the driver's head restraint is automatically adjusted simultaneously with the seat position adjustment operation.
Seatback angle adjustment switch
Head restraint height adjustment switch
Seat cushion (front) angle adjustment switch
Vertical height adjustment switch
Lumbar/pelvic support adjustment switch
Driver’s seat: firmness, vertical, backward and forward positioning
Front passenger’s seat: firmness, backward and forward positioning
Seat cushion length adjustment switch
20
LS600hL_QG_U
■
Operating the front passenger's seat from driver's seat or rear seat
■
Operating the front passenger's seat from the driver's seat
Vehicles without relaxation seat
3
4
2
1 Tilts the seatback forward
Tilts the seatback backward
Moves the seat forward
Moves the seat backward
Vehicles with relaxation seat
1
2
5
6
3
4
Tilts the seatback forward and moves the seat forward
Tilts the seatback backward and moves the seat backward
If the rear seat is not in the neutral position, pressing the button once will move the rear seat to the neutral position. Pressing the button again will move the front passenger's seat to the neutral position.
Tilts the seatback forward
Tilts the seatback backward
Moves the seat forward
Moves the seat backward
21
LS600hL_QG_U
■
Operating the front passenger’s seat from the rear seat (vehicles with relaxation seat)
5-seat models
2
1 Moves the front passenger’s seat forward
The signal beeps when the seat operation stops at the forward limit.
Moves the front passenger’s seat backward
The seatback will return to the neutral position. If the head restraint is folded, it will rise before the seatback moves.
4-seat models
2
1 Moves the front passenger’s seat forward
The signal beeps when the seat operation stops at the forward limit.
Moves the front passenger’s seat backward
The seatback will return to the neutral position. If the head restraint is folded, it will rise before the seatback moves.
The operation can be performed when the power switch is in ON mode.
22
LS600hL_QG_U
Power Rear Seat
5-seat models without relaxation seat
2
1
3
Seat selection switch
Seat position adjustment switch
Seatback upper angle adjustment switch
4
5
Head restraint height adjustment switch
Pelvic support seat switches
23
LS600hL_QG_U
5-seat models with relaxation seat
2
1
3
4
5
Seat selection switch
Seat position adjustment switch
Seatback upper angle adjustment switch
Head restraint height adjustment switch
Seatback angle adjustment switch
8
9
6
7
10
Ottoman angle adjustment switch
Front passenger’s seat control switch
Relaxation mode switch
Rear seat relaxation system/pelvic support seat switches
Pelvic support seat switches
24
LS600hL_QG_U
4-seat models
2
1
3
4
5
Seat selection switch
Seat position adjustment switch
Seatback upper angle adjustment switch
Head restraint height adjustment switch
Seatback angle adjustment switch
8
9
6
7
Ottoman angle adjustment switch
Front passenger’s seat control switch
Relaxation mode switch
Rear seat relaxation system/pelvic support seat controller
■
Returning the rear seat from the front seats
Vehicles without relaxation seat
The seat will return to the neutral position while the button is pressed and held.
25
LS600hL_QG_U
Vehicles with relaxation seat
The seat will return to the neutral position while the button is pressed and held.
■
Relaxation mode (relaxation seat)
5-seat models
2
1 Enters relaxation mode
Returns to the neutral position
The rear seat seatback, ottoman and the front passenger seat operate simultaneously.
The operation can be performed when the power switch is in ON mode.
4-seat models
2
1 Enters relaxation mode
Returns to the neutral position
The rear seat seatback, ottoman and the front passenger seat operate simultaneously.
The operation can be performed when the power switch is in ON mode.
When a rear door is opened, the seat on that side will automatically return to the neutral position.
26
LS600hL_QG_U
■
Pelvic support seat with seat vibrator
5-seat models without relaxation seat
2
1 Support plate position adjustment switch
Vibration switch
Press to operate the vibration function. Vibration will start in the same speed level as when previously operated. Each time is pressed, the speed changes between 3 levels. Pressing “OFF” stops the vibration function.
5-seat models with relaxation seat
2
1 Support plate position adjustment switch
Vibration switch
Press to operate the vibration function. Vibration will start in the same speed level as when previously operated. Each time is pressed, the speed changes between 3 levels. Pressing “OFF” stops the vibration function.
27
LS600hL_QG_U
4-seat models
1
2
Support plate position adjustment switch
Vibration switch
Press to operate the vibration function. Vibration will start in the same speed level as when previously operated. Each time is pressed, the speed changes between
3 levels. Pressing “OFF” stops the vibration function.
Automatic stop function: Vibration will automatically stop approximately 15 minutes after starting.
■
Rear seat relaxation system (vehicles with relaxation seat)
5-seat models
1
2
3
Turns the system on and off
If no buttons are selected within approximately 3 minutes of operating this switch, the system will automatically turn off.
Starts the program
Partial pressure for the whole back
Starts the program
Stretches and relaxes the lower back
4
5
6
7
Starts operation for the upper back
Starts operation for the lower back
Adjusts the intensity of the air pressure
3 intensity levels are available.
Adjusts the speed of the air unit
3 speed levels are available.
28
LS600hL_QG_U
4-seat models
7
1
2
3
4
5
6
Turns the system on and off
If no buttons are selected within approximately 3 minutes of operating this switch, the system will automatically turn off.
Starts the program
Partial pressure for the whole back
Starts the program
Stretches and relaxes the lower back
Starts operation for the upper back
Starts operation for the lower back
Adjusts the intensity of the air pressure
3 intensity levels are available.
Adjusts the speed of the air unit
3 speed levels are available.
Automatic stop function: Each operation will automatically stop approximately 15 minutes after starting.
29
LS600hL_QG_U
Driving Position Memory
Your preferred driving position (the position of the driver's seat and steering wheel, angle of the outside rear view mirrors, and height of seat belt shoulder anchor) can be memorized and recalled with the touch of a button.
The same buttons are found on the front passenger's side, allowing the front passenger's seat position and seat belt shoulder anchor height to be memorized.
■
Entering a position to memory
2
1 Adjust the driver’s seat, steering wheel, outside rear view mirrors and seat belt shoulder anchor height to the desired positions. (When memorizing the front passenger’s seat, adjust the front passenger’s seat to the desired positions.)
Press the “SET” button, then within 3 seconds press button “1”, “2” or “3” until the signal beeps.
If the selected button has already been preset, the previously recorded position will be overwritten.
■
Recalling the memorized position
Press button “1”, “2” or “3” to recall the desired position.
Vehicles with relaxation seat:
When retractable table (4-seat models) or ottoman is used, rearward memories cannot be recalled.
30
LS600hL_QG_U
■
Linking driving position memory with door unlock operation (driver’s side)
Using the wireless remote control
While pressing the desired button (“1”, “2” or “3”), press on the wireless remote control until the signal beeps.
To prevent unintended triggering of the alarm, open and close a door once after a driving position has been recorded. (If a door is not opened within 30 seconds after
is pressed, the doors will be locked again and the alarm will automatically be set.)
Using the door lock switch
Carry only one of the keys (including the card key) to which you want to link the driving position. If 2 or more keys are in the vehicle, the driving position cannot be linked properly.
While pressing the desired button (“1”, “2” or “3”), press the lock or unlock side on the door lock switch (either the driver or passenger side) until the signal beeps.
31
LS600hL_QG_U
Rear Seat Position Memory
The rear seat position can be memorized and recalled with the touch of a button.
■
Entering a position to memory
Press the “SET” button until the signal beeps.
If the preset is being used, the previously recorded seat position will be overwritten.
■
Recalling the memorized position
Press the “M” button until the signal beeps.
■
Disabling the seat return function
Pressing the “C” button will disable the seat position recall or seat return function.
The indicator light comes on when the function is disabled.
Pressing the button again will enable the seat position recall or seat return function.
When the door is opened, the rear seat will automatically return to the neutral position.
32
LS600hL_QG_U
Steering Wheel
3
4
2
1 Up
Down
Toward the driver
Away from the driver
The steering wheel and driver’s seat move in accordance with engine switch mode and the driver’s seat belt condition. (
Inside Rear View Mirror
■
Anti-glare function
Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced.
Changing automatic anti-glare function mode
ON
2
1
Indicator
OFF
When the automatic anti-glare function is in ON mode, the indicator illuminates.
The function will set to ON mode each time the power switch is turned to ON mode.
Pressing the button turns the function to OFF mode. (The indicator also turns off.)
33
LS600hL_QG_U
Seat Belts
■
Adjusting the seat belt shoulder anchor height (front seats)
2
1 Moves the seat belt shoulder anchor up
Moves the seat belt shoulder anchor down
■
Seat belts comfort guides (outer rear seats)
For children or smaller-than-average people, slide the seat belt comfort guide forward so that the shoulder belt does not sit close to the person’s neck.
Outside Rear View Mirrors
■
Adjustment procedure
1
2
1
3
Select the mirror to be adjusted.
Left
Neutral position
Right
34
LS600hL_QG_U
2 To adjust the mirror, press the switch.
2
3
4
1 Up
Right
Down
Left
■
Folding and extending the mirrors
■
Using the switch
2
1 Folds the mirrors
Extends the mirrors
■
Setting automatic mode
Automatic mode allows the folding or extending of the mirrors to be linked to locking/ unlocking of the doors.
Indicator
To set to automatic mode, put the switch in the neutral position.
The indicator will come on.
■
Linked mirror function when reversing
When the mirror select switch is in the “L” or “R” position, the outside rear view mirrors will automatically angle downwards when the vehicle is reversing in order to give a better view of the ground. To disable this function, move the mirror select switch to the neutral position
(between “L” and “R”).
35
LS600hL_QG_U
Power (Ignition) Switch
Performing the following operations when carrying the electronic key on your person starts the hybrid system or changes power switch modes.
■
Starting the hybrid system
2
3
1
4
5
Turn the power switch to ON mode and check that the parking brake is set.
Check that the shift lever is set in P.
Firmly depress the brake pedal.
The power switch indicator will turn green. If the indicator does not turn green, the hybrid system cannot be started.
Press the power switch.
After a while, the “READY” indicator comes on with a beep sound.
The vehicle can move when the
“READY” indicator is on even if the engine is stopped.
Continue depressing the brake pedal until the hybrid system is completely started.
The hybrid system can be started from any power switch mode.
Check that the “READY” indicator is on.
The vehicle will not move when the
“READY” indicator is off.
■
Stopping the hybrid system
1
2
3
4
5
Stop the vehicle.
Shift the shift lever to P.
Set the parking brake.
Press the power switch.
Release the brake pedal and check that the indicator on the power switch is off.
36
LS600hL_QG_U
■
Changing power switch modes
Modes can be changed by pressing the power switch with the brake pedal released. (The mode changes each time the switch is pressed.)
2
1 Off*
The emergency flashers can be used.
ACCESSORY mode
Some electrical components such as the audio system can be used.
The power switch indicator turns amber.
3 ON mode
All electrical components can be used.
The power switch indicator turns amber.
*
: If the shift lever is in a position other than
P when turning off the hybrid system, the power switch will be turned to ACCES-
SORY mode, not to off.
37
LS600hL_QG_U
■
If your vehicle has to be stopped in an emergency
Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following procedure:
1
2
Steadily step on the brake pedal with both feet and firmly depress it.
Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.
Shift the shift lever to N.
If the shift lever is shifted to N
3
4
After slowing down, stop the vehicle in a safe place by the road.
Stop the hybrid system.
If the shift lever cannot be shifted to N
3
4
Keep depressing the brake pedal with both feet to reduce vehicle speed as much as possible.
To stop the hybrid system, press and hold the power switch for 2 consecutive seconds or more, or press it briefly 3 times or more in succession.
Press and hold for 2 seconds or more, or press briefly 3 times or more
5 Stop the vehicle in a safe place by the road.
38
LS600hL_QG_U
EV Drive Mode
In EV drive mode the electric motor (traction motor), powered by the hybrid battery
(traction battery), is used to drive the vehicle.
Turns EV drive mode on/off
When EV drive mode is turned on, the
EV drive mode indicator will come on.
Pressing the switch when in EV drive mode will return the vehicle to normal driving (using the gasoline engine and electric motor [traction motor]).
EV drive mode’s possible driving distance ranges from a few hundred meters to approximately 0.6 mile (1 km). Driving is possible at speeds of less than approximately 25 mph (40 km/h).
Hybrid Transmission
■
Shifting the shift lever
While the power switch is in ON mode, move the shift lever with the brake pedal depressed.
When shifting the shift lever between P and D, make sure that the vehicle is completely stopped.
39
LS600hL_QG_U
■
Shift position purpose
Shift position
P
R
N
D
S
Purpose and condition
Parking the vehicle/starting the hybrid system
Reversing
Condition in which the power is not transmitted
Normal driving
* 1
S mode driving
* 2
* 1 : To improve fuel efficiency and reduce noises, set the shift lever in D for normal driving.
* 2 : By selecting shift ranges using S mode, you can control accelerating forces and engine braking forces.
■
Selecting shift ranges in S mode
To enter S mode, shift the shift lever to the S position. The shift range can be selected by the shift lever.
2
1 Upshifting
Downshifting
The selected shift range, from S1 to S8, will be displayed in the meter.
The initial shift range in S mode is automatically set to S4, S5, S6 or S7 according to vehicle speed.
40
LS600hL_QG_U
Driving Mode Select Switch
The driving modes can be selected to suit driving condition.
41
4
1
2
3
Normal mode
For normal driving.
Press the switch to change the driving mode to normal mode when not in normal mode.
Comfort mode
By controlling the suspension, riding comfort is further enhanced. Suitable for city driving.
When not in comfort mode and the driving mode select switch is turned to the left, the
“COMFORT” indicator comes on in the multi-information display.
Eco drive mode
Use Eco drive mode to help achieve low fuel consumption during trips that involve frequent accelerating.
When in comfort mode and the driving mode select switch is turned to the left, the
“ECO MODE” indicator comes on in the multi-information display.
Sport mode
• SPORT S mode
Assists acceleration response by controlling the hybrid system. Suitable for when precise handling is desirable, for example when driving on mountain roads.
When not in SPORT S mode and the driving mode select switch is turned to the right, the “SPORT S” indicator comes on in the multi-information display, and the hybrid system Indicator changes to the tachometer.
• SPORT S+ mode
Helps to ensure steering performance and driving stability by simultaneously controlling the steering and suspension in addition to the hybrid system. Suitable for sporty driving.
When in SPORT S mode and the driving mode select switch is turned to the right, the
“SPORT S+” indicator comes on in the multi-information display.
LS600hL_QG_U
Parking Brake
■
Manual mode
U.S.A.
Canada
1
2
Sets the parking brake
The parking brake indicator light will come on.
Releases the parking brake
Operate the parking brake switch while depressing the brake pedal.
Make sure that the parking brake indicator light goes off.
■
Automatic mode
The parking brake is set or released automatically according to shift lever operation.
Turns automatic mode on/off
When automatic mode is turned on, it operates in the following manner:
● When the shift lever is moved into P, the parking brake will be set.
● When the shift lever is moved out of P, the parking brake will be released.
Operate the shift lever with the brake pedal depressed.
42
LS600hL_QG_U
Brake Hold
The brake hold system keeps the brake applied when the shift lever is in D, S or N with the system on and the brake pedal has been depressed to stop the vehicle.
Turns the brake hold system on
The brake hold standby indicator
(green) comes on. While the system is holding the brake, the brake hold operated indicator (yellow) comes on.
The system releases the brake when the accelerator pedal is depressed with the shift lever in D or S to allow smooth start off.
43
LS600hL_QG_U
Multi-information Display
The multi-information display presents the driver with a variety of driving-related data.
■
Display contents
● Trip information
• Energy monitor
• Driving range
• Average fuel consumption
• Current fuel consumption
• Average fuel consumption after refueling
• Distance after refueling
• Elapsed time
• Average vehicle speed
• Tire inflation pressure (
• Customization
● Drive monitor
Displays either the average fuel consumption after refueling or the driving range
● Intuitive parking assist display
*
● Dynamic radar cruise control with fullspeed range display
*
(if equipped)
● LKA (Lane-Keeping Assist) display
*
(if equipped)
● Warning messages
*
: Automatically displayed when the system is used. Display can be switched by pressing the “DISP” button.
44
LS600hL_QG_U
■
Switching the display of trip information
Items displayed can be switched by pressing the “DISP” button.
If a problem is detected in any of the vehicle’s systems, a warning message is shown on the multi-information display.
45
LS600hL_QG_U
Headlights
U.S.A. Canada
2
3
4
1 (U.S.A.) or (Canada)
The daytime running lights turn on.
The side marker, tail, license plate, instrument panel and daytime running lights turn on.
The headlights, parking lights and all lights listed (except daytime running lights) above turn on.
The headlights, parking lights, daytime running lights and all the lights listed above turn on and off automatically.
(When the power switch is in
ON mode.)
■
Turning on the high beam headlights
2
1 With the headlights on, push the lever away from you to turn on the high beams.
Pull the lever toward you to the center position to turn the high beams off.
Pull the lever toward you and release it to flash the high beams once.
You can flash the high beams with the headlights on or off.
■
AFS (Adaptive Front-lighting System)
AFS (Adaptive Front-lighting System) secures excellent visibility at intersections and on curves by automatically adjusting the direction of the light axis of the headlights according to vehicle speed and the degree of the tire’s angle as controlled by steering input.
46
LS600hL_QG_U
Automatic High Beam
The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of oncoming and preceding vehicles, etc., and automatically turns high beam on or off as necessary.
1 Push the lever away from you with the headlight switch in tion.
or posi-
2 Press the Automatic High Beam switch.
The Automatic High Beam indicator will come on when the headlights are turned on automatically to indicate that the system is active.
47
LS600hL_QG_U
■
Turning the high beam on/off manually
● Switching to low beam
Pull the lever to original position.
The Automatic High Beam indicator will turn off.
Push the lever away from you to activate the Automatic High Beam system again.
● Switching to high beam
Press the Automatic High Beam switch.
The Automatic High Beam indicator will turn off and the high beam indicator will turn on.
Press the switch to activate the Automatic High Beam system again.
For conditions in which the Automatic High Beam automatically turns the high beams on or off, refer to the “Owner's Manual”.
48
LS600hL_QG_U
Fog Lights
1
2
(U.S.A.) or (Canada)
Turns the front fog lights off
Turns the front fog lights on
Windshield Wipers and Washer
1
2
(U.S.A.) or
Temporary operation
(Canada)
Rain-sensing wiper operation
The wipers will operate automatically when the sensor detects falling rain.
The system automatically adjusts wiper timing in accordance with rain volume and vehicle speed.
3
4
(U.S.A.) or (Canada)
Low speed wiper operation
(U.S.A.) or (Canada)
High speed wiper operation
49
LS600hL_QG_U
When “AUTO” mode is selected, the sensor sensitivity can be adjusted by turning the switch ring.
5
6
Increases the sensitivity
Decreases the sensitivity
7 Washer/wiper dual operation
Wipers will automatically operate a couple of times after the washer squirts.
Rear Window and Outside Rear View
Mirror Defoggers
On/off
The defoggers will automatically turn off after approximately 15 minutes.
50
LS600hL_QG_U
Cruise Control (if equipped)
Use the cruise control to maintain a set speed without depressing the accelerator pedal.
2
1 Indicators
Cruise control switch
■
Setting the vehicle speed
1 Press the “ON•OFF” button to activate the cruise control.
Cruise control indicator will come on.
Press the button again to deactivate the cruise control.
2 Accelerate or decelerate the vehicle to the desired speed, and push the lever down to set the speed.
“SET” indicator will come on.
The vehicle speed at the moment the lever is released becomes the set speed.
51
LS600hL_QG_U
■
Adjusting the set speed
2
1 Increases the speed
Decreases the speed
Fine adjustment: Momentarily move the lever in the desired direction.
Large adjustment: Hold the lever in the desired direction.
■
Canceling and resuming the constant speed control
1
2
Pulling the lever toward you cancels the constant speed control.
The speed setting is also canceled when the brakes are applied.
Pushing the lever up resumes the constant speed control.
Resuming is available when the vehicle speed is more than approximately 25 mph (40 km/h).
52
LS600hL_QG_U
Dynamic Radar Cruise Control with
Full-speed Range (if equipped)
Dynamic radar cruise control with full-speed range supplements conventional cruise control with a vehicle-to-vehicle distance control. In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates, decelerates or stops in order to maintain a set following distance from vehicles ahead.
3
4
2
1
5
Vehicle-to-vehicle distance button
Display
Set speed
Indicators
Cruise control switch
■
Setting the vehicle speed (vehicle-to-vehicle distance control mode)
1 Press the “ON•OFF” button to activate the cruise control.
Radar cruise control indicator will come on and a message will be shown on the multi-information display.
Press the button again to deactivate the cruise control.
2 Accelerate or decelerate the vehicle to the desired speed, and push the lever down to set the speed.
“SET” indicator will be displayed.
The vehicle speed at the moment the lever is released becomes the set speed.
53
LS600hL_QG_U
■
Adjusting the set speed
2
1 Increases the speed
(Except when the vehicle has been stopped by system control in vehicleto-vehicle distance control mode)
Decreases the speed
Fine adjustment: Momentarily move the lever in the desired direction.
Large adjustment: Hold the lever in the desired direction.
■
Changing the vehicle-to-vehicle distance
Preceding vehicle mark
Type A
Type B
2
1
3
Pressing the button changes the vehicle-tovehicle distance as follows:
Long
Medium
Short
The vehicle-to-vehicle distance is set automatically to long mode when the power switch is turned to ON mode.
If a vehicle is running ahead of you, the preceding vehicle mark will also be displayed.
The vehicle-to-vehicle distance control mode maintains the preset cruising speed as long as no vehicle is detected ahead.
■
Resuming follow-up cruising when the vehicle has been stopped by system control
After the vehicle ahead of you starts off, push the lever up.
Your vehicle will also resume follow-up cruising if the accelerator pedal is depressed after the vehicle ahead of you starts off.
54
LS600hL_QG_U
■
Canceling and resuming the speed control
1
2
Pulling the lever toward you cancels the cruise control.
The setting is also canceled when the brake pedal is depressed while driving.
(When the vehicle has been stopped by system control, applying the brakes does not cancel the setting.)
Pushing the lever up resumes the cruise control and returns vehicle speed to the set speed.
However, when a vehicle ahead is not detected in vehicle-to-vehicle distance control mode, cruise control does not resume when the actual vehicle speed is approximately 25 mph (40 km/h) or less. Also, when the vehicle is in constant speed control mode and the actual vehicle speed is approximately
25 mph (40 km/h) or less, cruise control does not resume as the set speed is cleared.
55
LS600hL_QG_U
■
Selecting conventional constant speed control mode
1
2
Press the “ON•OFF” button to activate the cruise control.
Radar cruise control indicator will come on and a message will be shown on the multi-information display.
Press the button again to deactivate the cruise control.
Switch to constant speed control mode.
(Push the lever forward and hold for approximately 1 second.)
Cruise control indicator will come on and a message will be shown on the multi-information display.
When in constant speed control mode, to return to vehicle-to-vehicle distance control mode, push the lever forward again and hold for approximately 1 second.
Intuitive Parking Assist
The distance from your vehicle to nearby obstacles when parallel parking or maneuvering into a garage is measured by the sensors and communicated via the multi-information display, Remote Touch screen and a buzzer. Always check the surrounding area when using this system.
■
Turning the system on and off
Turns the intuitive parking assist on/off
When on, the indicator light comes on and the buzzer sounds to inform the driver that the system is operational.
56
LS600hL_QG_U
BSM (Blind Spot Monitor) (if equipped)
The Blind Spot Monitor is a system that has 2 functions;
● The Blind Spot Monitor function
Assists the driver in making the decision when changing lanes
● The Rear Cross Traffic Alert function
Assists the driver when backing up
1
2
3
BSM main switch
Pressing the switch turns the system on or off. When the switch is set to on, the switch’s indicator illuminates and the buzzer sounds. Common switch for Blind Spot Monitor function and Rear Cross Traffic Alert function.
Outside rear view mirror indicator
Blind Spot Monitor function:
When a vehicle is detected in the blind spot, the outside rear view mirror indicator comes on while the turn signal lever is not operated and the outside rear view mirror indicator flashes while the turn signal lever is operated.
Rear Cross Traffic Alert function:
When a vehicle approaching from the right or left rear of the vehicle is detected, the outside rear view mirror indicators flash.
Rear Cross Traffic Alert buzzer (Rear Cross Traffic Alert function only)
When a vehicle approaching from the right or left rear of the vehicle is detected, a buzzer sounds from behind the rear seat.
57
LS600hL_QG_U
LKA (Lane-Keeping Assist) (if equipped)
While driving on a freeway or motor highway that has lane markers and no sharp curves, the system recognizes the lanes using a camera located above the inside rear view mirror as a sensor to assist the driver with staying in the lane. The LKA system has two functions.
1
2
Lane departure warning function
If the system judges that the vehicle may deviate from its lane, it alerts the driver using rapid beeping, indications on the multi-information display, and a sensory warning* given via the steering wheel.
*
: A slight steering torque is applied for a short period of time in the direction of the center of the lane.
Lane keeping assist function
• This function will be active when the vehicle-to-vehicle distance control mode of the dynamic radar cruise control with full-speed range is set with vehicle speed above approximately 45 mph (72 km/h) and while the lane departure warning function is active.
• When the lane keeping assist function is active, a slight steering torque will be applied, to help the driver maintain the vehicle inside the lane.
58
LS600hL_QG_U
■
Turning the LKA system on
Press the LKA switch to activate the system.
LKA indicator will come on.
Press the switch again to turn the LKA system off.
The LKA system will revert to off each time the power switch is turned to ON mode.
■
Indication on the multi-information display
When the LKA system is on, the lane line display and steering wheel display are shown.
2
4
1
3
Lane keeping assist function operation indication
Steering wheel displayed:
Indicates that the function is currently operating.
Steering wheel not displayed:
Indicates that the function is not currently operating.
Dynamic radar cruise control with fullspeed range display
Lane departure warning function indication (when the inside of the white line is white):
The function has recognized lane markers.
Lane departure warning function indication (when the inside of the white line is black):
A lane marker is not recognized by the system, or the LKA system functions are temporarily canceled.
59
LS600hL_QG_U
Lexus Night View (if equipped)
Lexus night view is a system which assists with nighttime driving. Near-infrared rays are irradiated forward and an image converted from the irradiated light is shown on the
Remote Touch screen. The image shows pedestrians, obstacles, and road conditions ahead of the vehicle, which are difficult to see at nighttime with the naked eye.
■
Displaying the Lexus night view
1
2
3
Turn the power switch to ON mode.
Turn the headlights on.
Press the Lexus night view switch.
The Lexus night view is displayed on the
Remote Touch screen.
To return the screen to its previous state, press the switch again.
When the light sensor determines that it is currently night time from the brightness of the surrounding area, the Lexus night view can be operated by pressing the Lexus night view switch while the headlights are on.
60
LS600hL_QG_U
■
The Lexus night view display
● When displaying on the “Main Display”
1 Lexus night view screen
2 “Side Display” switching button
3 Brightness adjustment button
● When displaying on the “Side Display”
When another screen is displayed on the
“Main Display” while the Lexus night view is being shown on the “Main Display”, the
Lexus night view screen will be displayed on the “Side Display”.
2
1 Lexus night view screen
“Main Display” switching button
61
LS600hL_QG_U
Tire Pressure Warning System
Your vehicle is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise.
■
The tire inflation pressure display function
The tire pressure detected by the tire pressure warning system can be displayed on the multi-information display.
■
Initializing the tire pressure warning system
Press and hold the tire pressure warning reset switch until the tire pressure warning light blinks slowly 3 times.
LS600hL_QG_U
62
Remote Touch
The Remote Touch can be used to operate the Remote Touch screens.
■
Basic operation
Type A
Type B
1
2
4
3
5
“
•
” button
Press this button to change map scale and scroll through lists.
“COMPASS” button
Press this button to display the compass mode screen.
Remote Touch knob
Move in the desired direction to select a function, number and screen button.
Push the knob to enter the selected function, number and screen button.
Feedback force, pointer sound volume, on or off of selection sounds, etc. can be changed. Refer to the “Owner’s Manual” and “Navigation System Owner’s Manual”.
“MENU” button
Press this button to display the “Menu” screen.
“MAP/VOICE” button
Press this button to display the vehicle’s current position.
63
LS600hL_QG_U
■
Menu
Vehicles without navigation system
Vehicles with navigation system
Press the “MENU” button on the Remote
Touch to display the “Menu” screen.
1 “Destination” (
2 “Info” or “Info/Apps”
3 “Setup”
4 “Radio” (
5 “Media” (
6 “Climate” (
7 “Phone” (
8 “Display” (
■
Side Display
The following functions can be displayed and operated on the “Side Display”.
2
1 Audio (
Air conditioning system (
3 Vehicle information
, , :
To display detailed information on the “Main
Display”.
■
Selecting the operation screen
When selecting the “Side Display”, move the Remote Touch knob to the right until is displayed at the boundary between the “Main Display” and the “Side Display”, and then move it further to the right. When selecting the “Main Display”, move the Remote Touch knob to the left until is displayed at the boundary between the “Main Display” and the “Side Display”, and then move it further to the left.
64
LS600hL_QG_U
■
Display
2
3
4
Press the “MENU” button on the Remote
Touch and select “Display” on the “Menu” screen.
1 Displays the screen in “Day Mode” with the headlight switch on
Turns the screen off
Change function
Adjust contrast/brightness
■
Screen scroll operation
4
5
6
To scroll over the map, place the pointer in a position near the desired destination and then press and hold the Remote Touch knob.
1 Indicates the street name, city name, etc. for the selected point
2
3
Displays various information for the selected point
Indicates the distance from the current position to the pointer
Switches the screens
Zooms in on the map
Zooms out on the map
■
Setting a route
While route guidance is operating, you can change the route using the following method.
Select “Route”.
The following settings can be accessed
65
LS600hL_QG_U
3
4
2
1 Detour setting
Route preferences
Route overview
Pause and resume route guidance
Some functions are unavailable while the vehicle is in motion. Refer to the “Navigation System Owner’s Manual”.
Navigation System (if equipped)
■
Register home
2 1
2
Press the “MENU” button on the
Remote Touch.
Please refer to page 63 for the
Remote Touch operation.
Select “Setup”.
3 3 Select “Navigation.”.
4 4
5
6
Select “Home”.
Select “Set Home”.
Select “Address”.
66
LS600hL_QG_U
7
■
Destination input
■
Search by address
2
3
7
8
9
Select “City”.
Input a city name and select “OK”.
Select the screen button of the desired city name from the displayed list.
For security reasons, use a point close to your home instead of your actual home address.
Input the street name and select “OK”.
10
11 When the desired street name is found, select the corresponding screen button.
Input a house number and select “OK”.
12
13
14
Select “Enter”.
Select “OK”.
1
2
Press the “MENU” button on the
Remote Touch.
Please refer to page 63 for the
Remote Touch operation.
Select “Destination”.
3 Select “Address”.
67
LS600hL_QG_U
4
Select by city name
4 Select “City”.
5
4
Select by street address
5
5
6
Input a city name and select “OK”.
Select the screen button of the desired city name from the displayed list.
Input the street name and select “OK”.
7
8 When the desired street name is found, select the corresponding screen button.
9
10
Input a house number and select “OK”.
Select “Go to”.
11 Select “OK”.
4
5
6
7
Select “Street Address”.
Input a house number and select “OK”.
Input the street name and select “OK”.
When the desired street name is found, select the corresponding screen button.
8
9
Input a city name and select “OK”.
Select the screen button of the desired city name from the displayed list.
10 Select “Go to”.
11 Select “OK”.
68
LS600hL_QG_U
■
Search points of interest
2
3
1
2
Press the “MENU” button on the
Remote Touch.
Please refer to page 63 for the
Remote Touch operation.
Select “Destination”.
3 Select “Point of Interest”.
4
Search by name
4 Select “Name”.
5 5 Input the name of the point of interest and select “OK”.
6
7
8
Select the screen button of the desired destination.
Select “Go to”.
Select “OK”.
69
LS600hL_QG_U
4
Search by category
4 Select “Category”.
5
4
Search by telephone number
5
6
Select “Near a Destination”.
Select the screen button of the desired destination and set screen the search point.
7
8
Select the desired point of interest category from the displayed list.
Select the screen button of the desired item.
9
10
Select “Go to”.
Select “OK”.
4 Select “Phone #”.
5 5
6
7
Input a telephone number and select
“OK”.
Select “Go to”.
Select “OK”.
70
LS600hL_QG_U
Hands-free System For Cellular Phone
■
Bluetooth
®
phone pairing
Compatible Bluetooth ® -equipped phones can be connected to the vehicle, enabling hands-free operation. Please refer to the cellular phone manufacturer’s user guide for pairing procedures, or go to http://www.lexus.com/MobileLink for more phone information.
2
To use a Bluetooth
®
phone, it is necessary to first register it in the system.
1 Press the “MENU” button on the
Remote Touch.
Please refer to page 63 for the
Remote Touch operation.
2 Select “Phone”.
3 3 Select “Yes”.
4 4
5
When this screen is displayed, operate the Bluetooth ® device.
Refer to the cellular phone user’s manual for cellular phone operation.
If a completion message is displayed, registration is complete.
71
LS600hL_QG_U
■
Phonebook transfer
2
3
6
1
2
Press the “MENU” button on the
Remote Touch.
Please refer to page 63 for the
Remote Touch operation.
Select “Setup”.
3
4
5
Select “Phone”.
Select “Phonebook”.
Select “Manage Contacts”.
6
7
Select “Transfer Contacts”.
Select “Update Contacts”.
8 8 Transfer the phonebook data to the system using the cellular phone.
Refer to the cellular phone user’s manual for cellular phone operation.
Phonebook transfer may not be possible depending on phone model.
72
LS600hL_QG_U
■
Registering a speed dial
2
3
1
2
Press the “MENU” button on the
Remote Touch.
Please refer to page 63 for the
Remote Touch operation.
Select “Setup”.
3
4
5
Select “Phone”.
Select “Phonebook”.
Select “Manage Speed Dials”.
6 6 Select “New”.
7 7
8
9
Select the data you want to register.
Select the desired phone number.
Select the button you want to register in.
73
LS600hL_QG_U
■
Calling by name
You can call by giving a name registered in the phonebook. For details, refer to the “Owner’s
Manual” and “Navigation System Owner’s Manual”.
1 1 Press .
2 2
3
Following the system guidance, wait for the beep and then after saying “Call” say the desired name, or the name and type of phone.
Following the system guidance, wait for the beep and then say “Dial”.
: Pressing this switch turns the voice command system on. Say a command after the beep.
■
Calling by speed dial
2 1
2
Press the “MENU” button on the
Remote Touch.
Please refer to P.63 for the Remote
Touch operation.
Select “Phone”.
74
LS600hL_QG_U
3
4
3 Select “Speed Dials”.
4 Select the desired number to call.
■
Calling using SMS/MMS message
3 1
2
3
4
5
6
Press the “MENU” button on the
Remote Touch.
Please refer to P.63 for the Remote
Touch operation.
Select “Phone”.
Select “Messages”.
Select “SMS/MMS” tab.
Select the desired received message from the displayed list.
Press on the steering wheel.
The tab display may vary depending on the type of cellular phone.
75
LS600hL_QG_U
■
Receiving a call
1 1 When a call is received, this screen is displayed with a sound.
2
■
Steering switches
2 Press on the steering wheel to talk on the phone.
To refuse the call, press on the steering wheel.
1
4
5
2
3
Sending/Receiving/“Phone” screen display
End call/Refuse call
Start the voice command system
Return to the previous screen
Increases/decreases volume
76
LS600hL_QG_U
Audio System
■
Audio control screen
Follow the procedure below to display the audio control screen.
1
2
Press the “MENU” button on the
Remote Touch.
Please refer to page 63 for the
Remote Touch operation.
The “Menu” screen will be displayed.
Using the Remote Touch, select
“Radio” or “Media” and select each tab.
■
Side Display
Operations such as selecting a preset station or track are carried out on the screen.
2
1 Changing the audio mode
Selecting a radio station that has been registered to the preset buttons, track/ file or chapter
■
Remote control (steering wheel switches)
Some audio features can be controlled using the switches on the steering wheel.
2
1
3
Increases/decreases volume
Radio mode: Selects a radio station/ channel
Audio CD mode: Selects a track
MP3/WMA disc mode: Selects a file and folder
DVD mode: Selects a chapter iPod mode: Selects a track
Press: Turns the power on, selects audio source
Press and hold: Mute/unmute or pause/resume the current operation
77
LS600hL_QG_U
■
Basic operation
■
Radio
1
2
3
4
Audio sources
AM: AM radio
FM: FM radio
SAT: Satellite radio
Apps (if equipped): Internet radio broadcast
DISC: DVD player/CD player iPod: iPod
USB: USB memory
BT Audio: Bluetooth ® audio
AUX: Auxiliary audio device
Sound quality modes
Power/Volume
Mute/unmute or pause/resume the current operation
2
1
3
4
5
Preset stations/channels
Scanning for receivable stations/channels
Using HD Radio
TM
Technology (if equipped)
Adjusting the frequency
Preset turning/seeking the frequency
■
Entering station presets
1 Select the desired station by using the tune, the seek or the scan function.
2 Using the Remote Touch, select one of the left side screen buttons and hold it until a beep is heard, indicating that the station has been set.
There are 6 sets of 6 presets. There is a total of 36 presets.
78
LS600hL_QG_U
■
DVD player/CD player
■
Playing an audio CD
3
4
2
1
5
Random playback
Repeat play
Playback/pause
Selecting a track
CD eject
■
Playing a CD with MP3/WMA files
5
6
7
3
4
2
1 Random playback
Repeat play
Playback/pause
Selecting a file
Folder selection
File selection/fast forward/rewind
CD eject
79
LS600hL_QG_U
■
Playing a DVD
■
Operating an iPod
5
6
7
3
4
2
1 Image display (full screen)
Reverse
Stop
Playback/pause
Fast forward
Chapter selection
DVD eject
3
4
2
1
5
Select play mode
Playback/pause
Song selection
Repeat play
Shuffle playback
80
LS600hL_QG_U
■
Rear seat audio controls
Some front audio features can be controlled from the rear seats.
3
4
2
1
5
Volume
Power
Track or file etc.
Preset station or folder etc.
Audio sources
Portable Audio Device Ports
These ports can be used to connect a portable audio device and listen to it through the vehicle’s speakers.
Open the console box, open the cover and connect the portable audio device.
81
LS600hL_QG_U
Lexus Climate Concierge
The climate control seats on each seat and heated steering wheel are automatically controlled according to the set temperature of the air conditioning system, outside temperature, cabin temperature, etc. Lexus Climate Concierge allows a comfortable condition to be maintained without adjusting each system.
1
2
3
Automatic air conditioning system (
Set the air conditioning system to automatic mode.
The temperature for the driver's seat, front passenger's seat and both rear seats can be adjusted individually.
Climate control seats (
Select “AUTO” mode on each seat.
Seat heater, off, ventilation or seat cooler is automatically selected according to the set temperature of the air conditioning system, outside temperature, etc.
Heated steering wheel (
Turned on automatically according to the outside and cabin temperature when the engine is started.
Operates for a maximum of 30 minutes.
82
LS600hL_QG_U
Front Air Conditioning System
Control screen
Control panel
83
6
1
2
3
4
5
7
8
9
Left-hand front seat side air outlet selector
Air flows to the feet and the windshield defogger operates
Outside temperature
Rear air conditioning operation screen
Right-hand front seat side temperature display
Right-hand front seat side temperature control
Right-hand front seat side air outlet selector
Air purifier and rear air conditioning function on/off
Windshield wiper de-icer
(if equipped)
13
14
16
17
10
11
12
15
20
21
18
19
Micro dust and pollen filter
4-ZONE mode
Cooling and dehumidification function on/off
Fan speed control
Left-hand front seat side temperature control
Left-hand front seat side temperature display
Outside air or recirculated mode
Rear window and outside rear view mirror defoggers
Windshield defogger
Air outlet selector
Off
Automatic mode
LS600hL_QG_U
■
Side Display
5
6
7
Operations such as changing the air outlets or fan speed are carried out on the screen.
2
1 Fan speed control
Right-hand front seat side air outlet selector
3
4
Right-hand front seat side temperature control
Right-hand front seat side temperature display
4-ZONE mode
Automatic mode
8
Cooling and dehumidification function on/off
Left-hand front seat side temperature display
9
10
Left-hand front seat side temperature control
Left-hand front seat side air outlet selector
■
Using the automatic mode
Press the automatic mode button to turn on the airflow and the driver’s side temperature control buttons to adjust the temperature.
■
Adjusting the temperature
In individual mode, the temperature for the driver’s, front passenger’s and rear seats can be adjusted separately.
Press the passenger’s side temperature control buttons to adjust the temperature for the passenger side.
To adjust the temperature for the rear seats, see page 85.
To cancel the individual mode, press the 4-ZONE mode button.
84
LS600hL_QG_U
Rear Air Conditioning System
2
10
11
12
5
6
3
4
7
1
8
9
Left-hand rear seat side temperature control
Left-hand rear seat side air outlet selector
Automatic mode
Off
Fan speed control
Right-hand rear seat side air outlet selector
Right-hand rear seat side temperature control
Right-hand rear seat side temperature display
Right-hand rear seat side air flow display
Fan speed display
Left-hand rear seat side air flow display
Left-hand rear seat side temperature display
■
Front controller
2
1
3
4
5
6
Fan speed control
Right-hand rear seat side temperature control and display
Disabling the switches on the rear armrest
Automatic mode
Off
Left-hand rear seat side temperature control and display
85
LS600hL_QG_U
Heated Steering Wheel
The left and right grip portions of the steering wheel can be warmed.
Automatic operation
Operates automatically according to the outside and cabin temperature when the power switch is turned to ON mode. Automatic operation can be turned off using the switch.
The indicator light comes on when the heater is operating.
Manual operation
Turns the heated steering wheel on/off.
The indicator light comes on when the heater is operating.
LS600hL_QG_U
86
Climate Control Seats
The seats can be heated or cooled.
■
Front climate control seats
1 Press the knob to release the lock.
Press the knob to lock it when not in use.
AUTO setting
Manual setting
2 Turn the knob to the “AUTO” position.
When set to “AUTO” mode, seat heater, off, ventilation or seat cooler is automatically selected according to the set temperature of the air conditioning system, outside temperature, etc.
2
3
4
2
1
Set the temperature by turning the knob to the left or right.
Off
Seat heater
Ventilation
Seat cooler
87
LS600hL_QG_U
■
Rear climate control seats
5-seat models 4-seat models
■
AUTO setting
The switch turned on/off.
When set to “AUTO” mode, the indicator illuminates.
When set to “AUTO” mode, seat heater, off, ventilation or seat cooler is automatically selected according to the set temperature of the air conditioning system, outside temperature, etc.
88
LS600hL_QG_U
■
Manual setting
The strength of the seat heater and seat cooler can be adjusted to 3 levels each.
Seat heater
* 1 : When the system is off, pressing “ ” turns the seat heater on.
Pressing “ ” increases the level and pressing “ ” lowers the level.
Seat cooler
* 2 : When the system is off, pressing “ ” turns the seat cooler on.
Pressing “ ” increases the level and pressing “ ” lowers the level.
OFF
Seat heater
* 1
1 Low
2 Mid
3 Hi
* 1 : The indicator illuminates in amber.
* 2 : The indicator illuminates in blue.
Seat cooler
* 2
4
5
6
Low
Mid
Hi
89
LS600hL_QG_U
Rear Sunshade/Rear Door Sunshades
2
1 Rear sunshade
Rear door sunshades
■
Raising/Extending from the front seat
Vehicles with power rear seat
2
1
3
Raises the rear sunshade
Extends the rear door sunshade (left side)
Extends the rear door sunshade (right side)
Press the button again to lower or retract the sunshade(s).
Vehicles with relaxation seat
2
1
3
Raises the rear sunshade
Extends the rear door sunshade (left side)
Extends the rear door sunshade (right side)
Press the button again to lower or retract the sunshade(s).
90
LS600hL_QG_U
■
Raising/Extending from the rear seat
5-seat models
2
1
3
Raises the rear sunshade
Extends the rear door sunshade (left side)
Extends the rear door sunshade (right side)
Press the button again to lower or retract the sunshade(s).
4-seat models
2
1
3
Raises the rear sunshade
Extends the rear door sunshade (left side)
Extends the rear door sunshade (right side)
Press the button again to lower or retract the sunshade(s).
The rear sunshade automatically lowers to ensure visibility when reversing.
91
LS600hL_QG_U
Voice Command System
■
Basic operation
1
2
Press on the steering wheel.
- If you know the command:
- If you do not know the command:
Follow the voice guidance to learn the command and then press again.
3 Say a command after the beep.
Continue on to pages 93-94 for a detailed list of Voice Commands for the following cate-
gories:
Climate/air conditioning system command . . . . . . . . . . . . . . . . page 94
■ Important voice commands information and tips
Voice commands can be used while driving.
You must wait until after the beep to say a command.
In vehicles with a navigation system, a large TALK icon will appear on the navigation screen to prompt you to say a command.
If you know what command to use, you can press at any time to interrupt the voice guidance.
If a desired outcome is not shown, or if no selections are available, press on the steering wheel to return to the previous screen.
NOTE: When inputting voice commands you must wait until after the beep to speak.
92
LS600hL_QG_U
93
■
Command list
Set a Destination (vehicles with navigation system)
Command
“Find Nearby <POI category>”
“Enter an Address”
“Go Home”
“Call Destination Assist”
“Destination by Phone Number”
Action
Displays a list of <POI category
*
> near the current position.
Enables setting a destination by saying the address.
Displays the route to home.
Connects Lexus Enform with Safety Connect response center.
Enables setting a destination by saying the phone number.
*
: For example; Gas stations, Restaurants, etc.
Use the Phone
Command
“Call <name> <type>”
“Dial <number>”
“International Call”
Action
Calls made by saying a name from the phonebook.
For example: Say “Call John Smith”, “Call John Smith, mobile” etc.
Calls made by saying the phone number.
For example: Say “Dial 911”, “Dial 5556667777” etc.
Calls international numbers by saying the phone number.
Play Music
Command
“Play Artist <name>”
“Play Album <name>”
“Play Song <name>”
“Play Playlist <name>”
Action
Plays tracks by the selected artist.
For example: Say “Play artist <XXXXX>”
*
Plays tracks from the selected album.
For example: Say “Play album <XXXXX>”
*
Plays the selected track.
For example: Say “Play song Summertime”, “Play song Concerto in A Major” etc.
Plays tracks from the selected playlist.
For example: Say “Play playlist My Favorite Songs”,
“Play Playlist Classic Hits” etc.
*
: Say the desired artist name or album name in the place of the “<>”.
LS600hL_QG_U
Get Information (vehicles with navigation system)
“Traffic”
Command
“Weather”
“Sports Scores”
“Stock Quotes”
“Fuel Prices”
“Lexus Insider”
Select audio mode
Action
Displays the traffic incident list.
Displays weather information.
Displays the sports list.
Displays the stocks list.
Displays the fuel prices list.
Displays the Lexus insider list.
Command
“Radio”, “AM”, “FM”, “Satellite radio”, “Disc”, “Auxiliary”,
“Bluetooth
*
audio”, “iPod”,
“USB audio”
“Audio on”
“Audio off”
Action
Change the audio mode.
Turns the audio system on.
Turns the audio system off.
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Climate/air conditioning system command
Command
“Automatic climate control”
“Warmer”
“Cooler”
Action
Turns air conditioning system on and off.
Turns temperature up.
Turns temperature down.
“Select audio mode” and “Climate/air conditioning system command” are enable when expanded voice commands are turned “On”. Refer to the “Owner’s Manual” and “Navigation System Owner’s Manual”.
94
LS600hL_QG_U
Garage Door Opener
The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, security systems, and other devices.
The garage door opener (HomeLink ® Universal Transceiver) is manufactured under license from HomeLink ® .
■
Programming the HomeLink
®
(for U.S.A. owners)
The HomeLink ® compatible transceiver in your vehicle has 3 buttons which can be programmed to operate 3 different devices. Refer to the programming method below appropriate for the device.
2
1 Indicator light
Buttons
95
LS600hL_QG_U
■
Programming HomeLink
®
1
2
3
Hold your hand-held transmitter 1 to 3 in. (25 to 75 mm) of the HomeLink ® buttons.
Press and hold down the desired
HomeLink ® button.
For U.S.A. owners:
While pressing the HomeLink ® button, press and hold down the button on the hand-held transmitter until the indicator light changes from a slow to a rapid flash.
For Canadian owners:
While pressing the HomeLink ® button, repeatedly press and release
(cycle) the button on the hand-held transmitter every 2 seconds until the indicator light changes from a slow to a rapid flash.
If your garage door is of the Rolling Code type:
4
5
Press the learn button.
Press and hold the vehicle’s programmed HomeLink ® button for 2 seconds and release it. Repeat this step once again.
If the door does not open, press and release the same button once again.
96
LS600hL_QG_U
■
Programming other devices
For U.S.A. owners:
To program an entry gate, see the Owner’s Manual.
To program other devices, contact your Lexus dealer.
For Canadian owners:
To program all other devices, follow the same procedure as for garage door programming.
■
Operating HomeLink
®
Press the appropriate HomeLink ® button.
The indicator light should come on.
Safety Connect (if equipped)
Safety Connect is a subscription-based telematics service that uses Global Positioning
System (GPS) data and embedded cellular technology to provide safety and security features to subscribers. Safety Connect is supported by Lexus’ designated response center, which operates 24 hours per day, 7 days per week.
Safety Connect service is available by subscription on select, telematics hardwareequipped vehicles.
■
System components
2
1
3
Microphone
“SOS” button
LED light indicators
97
LS600hL_QG_U
■
Services
Subscribers have the following Safety Connect services available:
● Automatic Collision Notification
*
In case of either airbag deployment or severe rear-end collision, the system is designed to automatically call the response center. The responding agent receives the vehicle’s location and attempts to speak with the vehicle occupants to assess the level of emergency. If the occupants are unable to communicate, the agent automatically treats the call as an emergency, contacts the nearest emergency services provider to describe the situation, and requests that assistance be sent to the location.
* : U.S. Patent No. 7,508,298 B2
● Stolen Vehicle Location
If your vehicle is stolen, Safety Connect can work with local authorities to assist them in locating and recovering the vehicle. After filing a police report, call the Safety Connect response center at 1-800-25-LEXUS (1-800-255-3987) and follow the prompts for
Safety Connect to initiate this service.
In addition to assisting law enforcement with recovery of a stolen vehicle, Safety-Connect-equipped vehicle location data may, under certain circumstances, be shared with third parties to locate your vehicle. Further information is available at Lexus.com.
● Emergency Assistance Button (SOS)
In the event of an emergency on the road, push the “SOS” button to reach the Safety
Connect response center. The answering agent will determine your vehicle’s location, assess the emergency, and dispatch the necessary assistance required.
If you accidentally press the “SOS” button, tell the response-center agent that you are not experiencing an emergency.
● Enhanced Roadside Assistance
Enhanced Roadside Assistance adds GPS data to the already included warranty-based
Lexus roadside service.
Subscribers can press the “SOS” button to reach a Safety Connect response-center agent, who can help with a wide range of needs, such as: towing, flat tire, fuel delivery, etc.
For a description of the Roadside Assistance services and their limitations, please see the
Safety Connect Terms and Conditions, which are available at Lexus.com.
■
Subscription
After you have signed the Telematics Subscription Service Agreement and are enrolled, you can begin receiving services.
A variety of subscription terms is available for purchase. Contact your Lexus dealer, call 1-
800-25-LEXUS (1-800-255-3987) or push the “SOS” button in your vehicle for further subscription details.
98
LS600hL_QG_U
99
Lexus Enform with Safety Connect (if equipped)
Lexus Enform with Safety Connect is a generic name for Apps, Destination Assist, eDestination, Lexus Insider, and Safety Connect.
The functions included in Lexus Enform with Safety Connect are classified into the following three functions.
For details, refer to the “Owner’s Manual” and “Navigation System Owner’s Manual”.
■
Function achieved by using a cellular phone
■
Services
Of the functions included with Lexus Enform with Safety Connect, only Apps can be achieved by using a cellular phone.
Apps is a service that enables the usable contents of a cellular phone to be displayed on and operated from the navigation screen.
● APPS
Each time “Apps” is activated, the system checks for updates. When there are no updates available, the main menu screen will be displayed right after a screen indicating that updates are being checked for has been displayed.
■
Subscription
Apps will be available on a trial period included upon purchase of a new vehicle. User registration is required to start using the service.
When a trial period has elapsed after purchasing a new vehicle, a fee will be charged to renew the contract. Services requiring a separate contract can also be used. For details, refer to http://www.lexus.com/enform/ or call 1-800-255-3987.
■
Function achieved by using DCM and the navigation system
■
Services
Of the functions included with Lexus Enform with Safety Connect, Destination Assist, eDestination, and Lexus Insider can be achieved by making DCM cooperate with the navigation system.
These are subscription-based telematics services that use Global Positioning System (GPS) data, embedded cellular technology to provide safety and security as well as convenience features to subscribers. The services are supported by Lexus’ designated response center, which operates 24 hours per day, 7 days per week.
The services are available by subscription on select, telematics hardware-equipped vehicles.
● Destination Assist
Destination Assist provides you with live assistance for finding destinations via the Lexus
Enform with Safety Connect response center. You can request either a specific business, address, or ask for help locating your desired destination by category, such as restaurants, gas stations, shopping centers or other points of interest (POI).
After you tell the agent your choice of destination, its coordinates are sent wirelessly to your vehicle’s navigation system.
LS600hL_QG_U
● eDestination
With the eDestination feature, you can go online, via the Lexus.com owner’s Web site, to select and organize destinations of your choice and then wirelessly send them to your vehicle’s navigation system.
You can store up to 200 locations online to access and update at any time.
Your locations can be organized into up to 20 personalized folders.
You must first go online at www.lexus.com/drivers/ to view the Owners site where you will need to register and log in. After this, you can create your personalized folders containing the locations you wish to send to your vehicle. (See Lexus Enform with Safety
Connect Guide for more information.)
● Lexus Insider
Lexus Insider is an optional service that can send audio messages, or articles, to participating owners’ vehicles via the navigation system. Potential Lexus Insider subjects might include, for example, Lexus vehicle technology tips, updates on regional Lexus events, or audio excerpts from Lexus Magazine articles. Up to 20 articles can be stored at a time.
You may opt out of receiving Lexus Insider messages at any time.
■
Subscription
After you have signed the Telematics Subscription Service Agreement and are enrolled, you can begin receiving services. A variety of subscription terms is available for purchase.
Contact your Lexus dealer, call 1-800-25-LEXUS (1-800-255-3987), or select the “Destination Assist” in your vehicle for further subscription details.
■
Function achieved by using DCM
■
Services
Of the functions included with Lexus Enform with Safety Connect, Safety Connect can be achieved by using DCM.
● Safety Connect (
100
LS600hL_QG_U
XM Services (if equipped)
XM services are subscription-based XM Satellite Radio services to provide convenient features to subscribers.
For details, refer to the “Owner’s Manual” and “Navigation System Owner’s Manual”.
■
Services
With an active XM subscription, the following features are available:
● XM Sports and Stocks
* 1
XM Sports and Stocks is a service included with an XM Satellite Radio subscription. This service is also available with an XM TravelLink subscription. With this service, you can receive updates via the navigation system on your personally selected sports teams and stocks.
● XM Fuel Prices
* 2
XM Fuel Prices is a service included with an XM TravelLink subscription. It enables the navigation system to display current fuel prices and gas station locations, which can be set as a destination if desired.
● XM NavWeather TM * 2
The subscription-based XM NavWeather TM service allows the navigation system to display weather information on the map screen.
● XM NavTraffic ® * 2
The subscription-based XM NavTraffic ® service allows the navigation system to display traffic information on the map screen.
* 1
: Available at no extra charge with an active XM Satellite Radio subscription.
* 2 : Available via separate XM subscription(s).
■
Subscription
XM NavTraffic ® , XM NavWeather TM tion(s). XM Sports
and XM TravelLink require separate XM subscrip-
*
, XM Stocks
*
and XM Fuel Prices are available with an XM TravelLink subscription. After a 90-day trial, you must contact XM and set up the appropriate XM subscription(s) to continue receiving these services.
*
: XM Sports and XM Stocks are included with an XM Satellite Radio subscription.
101
LS600hL_QG_U
List of Storage Features
5-seat models
3
4
2
1 Glove box
Auxiliary boxes (if equipped)
Cup holders
Door pockets
6
7
5 Auxiliary boxes (if equipped)
Ashtrays (if equipped)
Console box
Coin holder
102
LS600hL_QG_U
4-seat models
3
4
2
1 Glove box
Auxiliary boxes
Cup holders
Door pockets
6
7
5 Auxiliary boxes (if equipped)
Ashtrays (if equipped)
Console box
Coin holder
103
LS600hL_QG_U
Door Locks
The vehicle can be locked and unlocked using the entry function, wireless remote control or door lock switches.
For details the entry function or wireless remote control (
■
Door lock switches
2
1 Locks all the doors
Unlocks all the doors
■
Inside lock buttons
2
1 Locks the door
Unlocks the door
The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position.
104
LS600hL_QG_U
■
Rear door child-protector lock
The door cannot be opened from inside the vehicle when the lock is set.
Unlock
2
1
Lock
These locks can be set to prevent children from opening the rear doors.
Push down on each rear door switch to lock both rear doors.
Power Windows
■
Power window switches
■
Window lock switch
1
2
Closing
One-touch closing
*
3 Opening
4 One-touch opening
*
*
: To stop the window partway, operate the switch in the opposite direction.
Press the switch down to lock the passenger window switches.
Use this switch to prevent children from accidentally opening or closing a passenger window.
105
LS600hL_QG_U
Moon Roof
■
Opening and closing
■
Tilting up and down
1 Opens the moon roof
*
The moon roof stops slightly before the fully open position to reduce wind noise.
Press the switch again to fully open the moon roof.
2 Closes the moon roof
*
*
: Lightly press either way of the moon roof switch to stop the moon roof partway.
1 Tilts the moon roof up
*
2 Tilts the moon roof down
*
*
: Lightly press either way of the moon roof switch to stop the moon roof partway.
Fuel Tank Cap
■
Before refueling the vehicle
● Close all the doors and windows, and turn the power switch off.
● Confirm the type of fuel.
■
Opening the fuel tank cap
1 Press the opener switch.
Refueling will be possible when a message on the multi-information display indicates that the door fuel filler door has opened.
106
LS600hL_QG_U
Hood
2 Turn the fuel tank cap slowly to open.
3 Hang the fuel tank cap on the back of the fuel filler door.
1 Pull the hood lock release lever.
The hood will pop up slightly.
2 Pull up the auxiliary catch lever and lift the hood.
107
LS600hL_QG_U
Trunk
■
Opening the trunk
● From inside the vehicle
Press the opener switch.
The trunk lid automatically opens fully.
● From outside the vehicle
• Entry function
• Wireless remote control
■
Trunk easy closer
In the event that the trunk lid is left slightly open, the trunk easy closer will automatically close it to the fully closed position.
■
Trunk closer switch
Pressing the switch closes the trunk lid automatically. (A buzzer sounds.)
Pressing the switch while the trunk lid is closing opens the trunk lid again.
■
Luggage security system
Turn the main switch in the glove box off to disable the trunk opener.
1 On
2 Off
The trunk lid cannot be opened even with the wireless remote control or the entry function.
108
LS600hL_QG_U
What to do if...
List of Warning/Indicator Lights
Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous.
(U.S.A.)
Brake system warning light
(Canada)
Stop the vehicle immediately.
Charging system warning light
Have the vehicle inspected immediately.
(U.S.A.)
Malfunction indicator lamp
(Canada)
Slip indicator
(Flashes)
Brake hold operated indicator
SRS warning light
(U.S.A.)
ABS warning light
(Canada)
(Flashes)
(U.S.A.)
Parking brake indicator
(Canada)
(Flashes)
Brake system warning light
Electric power steering system warning light
(Blinking and then continuously on)
Tire pressure warning light
(Flashes)
Pre-collision system warning light (if equipped)
For further information, refer to the Owner’s Manual.
109
LS600hL_QG_U
What to do if...
Follow the correction procedures.
Open door warning light Master warning light
Low fuel level warning light
Seat belt reminder light
(Illuminates without blinking)
Tire pressure warning light
*
For further information, refer to the Owner’s Manual.
*
: It also comes on due to natural causes such as natural air leaks and tire inflation pressure changes caused by temperature. Adjust the tire inflation pressure to the specified level.
The light will turn off after a few minutes. In case the light does not turn off even if the tire inflation pressure is adjusted, have the system checked by your Lexus dealer.
110
LS600hL_QG_U
What to do if...
See the Owner’s Manual
Turn signal indicator
Headlight indicator (U.S.A.)
Tail light indicator (Canada)
Headlight high beam indicator
Automatic High Beam indicator
Front fog light indicator
“READY” indicator
Brake hold standby indicator
Brake hold operated indicator
Cruise control “SET” indicator
Cruise control indicator
Radar cruise control indicator (if equipped)
LKA (Lane-Keeping assist) indicator (if equipped)
“HEIGHT HIGH” indicator
EV indicator Slip indicator
(Flashes)
EV drive mode indicator
VSC (Vehicle Stability Control) OFF indicator
Snow mode indicator
BSM (Blind Spot Monitor) outside rear view mirror indicators (if equipped)
(U.S.A.)
(Canada)
Parking brake indicator
(Flashes faster)
Pre-collision system warning light (if equipped)
“AIR BAG ON/
OFF” indicator
For further information, refer to the Owner’s Manual.
111
LS600hL_QG_U
What to do if...
If the electronic key does not operate properly
■
Unlocking and locking the doors
To unlock or lock the vehicle, use the mechanical key to remove the lock cover on the driver's door handle. The mechanical key is stored inside the electronic key.
2
1 Locks all the doors
Closes the windows and moon roof
(turn and hold)
3
4
Unlocks the door
Turning the key rearward unlocks the driver’s door. Turning the key once again unlocks the other doors.
Opens the windows and moon roof
(turn and hold)
■
Unlocking the trunk
Turn the mechanical key clockwise to open.
112
LS600hL_QG_U
What to do if...
■
Starting the hybrid system
1
2
Ensure that the shift lever is in P and depress the brake pedal.
Touch the Lexus emblem side of the electronic key to the power switch.
If any of the doors is opened or closed after the key was touched to the switch to start the vehicle, an alarm will sound to indicate that the start function cannot detect the key.
3 Press the power switch within 10 seconds of the buzzer sounding, keeping the brake pedal depressed.
In the event that the hybrid system still cannot be started, contact your Lexus dealer.
If the electronic key battery is depleted, a warning message will be shown on the multiinformation display. Replace the battery with a new one. For instructions on replacing the battery, refer to the “Owner’s Manual”. If you need further assistance, contact your Lexus dealer.
If the hybrid system does not start
Make sure that the correct operating procedures have been followed.
Brake pedal
Make sure that the brake pedal is firmly depressed when attempting to start the hybrid system. (
If the hybrid system still does not start, see the “Owner’s Manual” for more information or contact your Lexus dealer.
113
LS600hL_QG_U
Your Lexus dealer
Your Lexus dealer will provide quality maintenance and any other assistance you may require.
If there is not a Lexus dealer near you, please call the following number:
■ U.S. OWNERS
● In the U.S. mainland or Canada:
Lexus Roadside Assistance
1-800-25-LEXUS or 1-800-255-3987 (Toll-Free)
● In Hawaii:
Servco Automotive Roadside Assistance/Customer Services
1-800-25-LEXUS or 1-800-255-3987 (Toll-Free)
■ CANADIAN OWNERS
● In Canada or the U.S. mainland:
Lexus Roadside Assistance/Customer Service
1-800-26-LEXUS or 1-800-265-3987 (Toll-Free)
Please access our websites for further information.
● The U.S. mainland: www.lexus.com
● Hawaii: www.servcolexus.com
● Canada: www.lexus.ca
©2012 TOYOTA MOTOR CORPORATION
All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of Toyota Motor Corporation.
114
LS600hL_QG_U
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project