advertisement
Contents
The Quick Guide is not intended as a substitute for your Owner’s
Manual . We strongly encourage you to review the Owner’s
Manual and supplementary manuals so you will have a better understanding of your vehicle’s capabilities and limitations.
Audio System (with Lexus Display Audio System)
Using the steering wheel switches to change audio sources......................................66
Operating the audio system using the steering wheel switches................................69
Audio System (with navigation system)
*
*
: These features may be operated by Voice Command (See P.73)
1
ES350_QG_OM06136U_(U)
Hands-free System For Cellular Phone (with Lexus Display Audio System)
How to register a Bluetooth ®
phone....................................................................................63
Hands-free System For Cellular Phone (with navigation system)
*
Bluetooth ®
*
: These features may be operated by Voice Command (See P.73)
ES350_QG_OM06136U_(U)
2
Lexus Display Audio Controller (with Lexus Display Audio System)............................ 61
Navigation System
*
*
: These features may be operated by Voice Command (See P.73)
3
ES350_QG_OM06136U_(U)
Voice Command System
ES350_QG_OM06136U_(U)
4
Overview
Instrument Panel
Window lock switch
Driving position memory switches ∗
Windshield wiper and washer switch
Multi-information display
Headlight switch
Turn signal lever
Fog light switch
*
See
Trunk opener
Hood lock release lever
*
Fuel filler door opener
Tire pressure warning reset switch
Tilt and telescopic steering lock release lever ∗ *
Inside lock button
Power window switches
Door lock switch
5
ES350_QG_OM06136U_(U)
Engine (ignition) switch
Remote Touch screen ∗
Navigation system ∗
Lexus Display Audio system ∗
Clock
*
Audio system
Air conditioning system
Floor mats
Trunk opener main switch
Emergency flasher switch
*
Tilt and telescopic steering control switch ∗ *
Parking brake
*
∗
: If equipped
*
: Refer to “OWNER’S MANUAL”.
6
ES350_QG_OM06136U_(U)
Overview
Instrument Panel
Odometer/trip meter and trip meter reset button
*
Instrument panel light control switches
*
Outside rear view mirror switches
7
ES350_QG_OM06136U_(U)
BSM (Blind Spot Monitor) main switch ∗
Intuitive parking assist switch ∗
Automatic High Beam switch ∗
Meter control switches
LDA (Lane Departure Alert with steering control) switch ∗
Audio remote control switches
Talk switch
Telephone switches
Tilt and telescopic steering control switch ∗ *
Horn
*
Cruise control switch ∗
Dynamic radar cruise control switch ∗
Vehicle-to-vehicle distance switch ∗
∗
: If equipped
*
: Refer to “OWNER’S MANUAL”.
8
ES350_QG_OM06136U_(U)
Overview
Instrument Panel
Seat heater and ventilator switches ∗
Heated steering wheel switch ∗ *
Rear sunshade switch ∗
Lexus Display Audio controller ∗
9
ES350_QG_OM06136U_(U)
Shift lever
Remote Touch ∗
VSC OFF switch
*
Driving mode select switch
Overview
Roof
Moon roof switches
Vanity lights
*
Personal lights
*
Interior lights
*
Inside rear view mirror
*
Garage door opener switches
“SOS” button ∗
∗
: If equipped
*
: Refer to “OWNER’S MANUAL”.
10
ES350_QG_OM06136U_(U)
Floor mat installation
Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet.
1 Insert the retaining hooks (clips) into the floor mat eyelets.
*
2 Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.
*
:Always align the marks.
The shape of the retaining hooks (clips) may differ from that shown in the illustration.
11
ES350_QG_OM06136U_(U)
Fuel Consumption Screen
Fuel consumption information can be displayed on the navigation system screen or
Lexus Display Audio system screen.
■
Displaying the fuel consumption screen
● Trip information
Navigation system screen
Press the “MENU” button on the Remote Touch, then select on the “Menu” screen, and then select “Fuel Consumption”.
If the “Trip Information” screen does not appear, select “Trip Information”.
1 Resetting the consumption data
2 Fuel consumption in the past 15 minutes
Current fuel consumption 3
4
5
Average vehicle speed since the engine was started
Elapsed time since the engine was started
6 Cruising range
Lexus Display Audio screen
Press the “MENU” button on the Lexus Display Audio controller, then select “Info” on the
“Menu” screen, and then select “Fuel Consumption”.
If the “Trip Information” screen does not appear, move the controller to the right and select
“Trip Information”.
1
2
3
4
5
Fuel consumption in the past 15 minutes
Current fuel consumption
Average vehicle speed since the engine was started
Elapsed time since the engine was started
Cruising range
Average fuel consumption for the past 15 minutes is divided by color into past averages and averages attained since the engine switch was last turned to IGNITION ON mode. Use the displayed average fuel consumption as a reference.
The image is an example only.
12
ES350_QG_OM06136U_(U)
● Past record
Navigation system screen
Press the “MENU” button on the Remote Touch, then select and then select “Fuel Consumption”.
If the “Past Record” screen does not appear, select “Past Record”.
on the “Menu” screen,
3
4
2
1
5
Resetting the past record data
Best recorded fuel consumption
Average fuel consumption
Previous fuel consumption record
Updating the average fuel consumption data
Lexus Display Audio screen
Press the “MENU” button on the Lexus Display Audio controller, then select “Info” on the
“Menu” screen, and then select “Fuel Consumption”.
If the “Past Record” screen does not appear, move the controller to the right and select “Past
Record”.
2
1
3
Previous fuel consumption record
Current fuel consumption
Best recorded fuel consumption
The average fuel consumption history is divided by color into past averages and the average fuel consumption since the last updated. Use the displayed average fuel consumption as a reference.
The image is an example only.
13
ES350_QG_OM06136U_(U)
Keys
■
Electronic key
Smart access system with push-button start
(
Wireless remote control (
■
Mechanical key
■
Wireless remote control
To take out the mechanical key, push the release button and take the key out.
After using the mechanical key, store it in the electronic key. Carry the mechanical key together with the electronic key. If the electronic key battery is depleted or the entry function does not operate properly, you will need the mechanical key.
2
1 Locks the doors
Unlocks the doors
Opens the windows and moon roof
*
3
4 Opens the trunk
5 Sounds the alarm
*
: This setting must be customized at your
Lexus dealer.
14
ES350_QG_OM06136U_(U)
Smart Access System with Push-button Start
The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key.
For details on starting the engine, see page 22.
■
Entering and exiting the vehicle
2
1 Grip the driver’s door handle to unlock the door. Grip the passenger’s door handle to unlock all the doors.
*
Make sure to touch the sensor on the back of the handle.
The doors cannot be unlocked for
3 seconds after the doors are locked.
*
: The door unlock settings can be changed.
Touch the lock sensor (the indentation on the upper part of the door handle) to lock all the doors.
Check that the door is securely locked.
■
Opening the trunk
Press the button.
If the vehicle is equipped with power trunk opener and closer, the trunk lid automatically opens fully.
For details on what to do when the electronic key does not operate properly, see page 97.
15
ES350_QG_OM06136U_(U)
Theft Deterrent System
■
Engine immobilizer system
The indicator light flashes after the engine switch has been turned off to indicate that the system is operating.
The indicator light stops flashing after the engine switch has been turned to ACCES-
SORY or IGNITION ON mode to indicate that the system has been canceled.
■
Alarm
The alarm uses light and sound to give an alert when an intrusion is detected.
To set the alarm:
Close the doors, trunk and hood, and lock all the doors. The system will be set automatically after 30 seconds.
The indicator light changes from being on to flashing when the system is set.
To deactivate or stop the alarm:
● Unlock the doors or open the trunk using the entry function or wireless remote control.
● Turn the engine switch to ACCESSORY or IGNITION ON mode, or start the engine.
(The alarm will be deactivated or stopped after a few seconds.)
16
ES350_QG_OM06136U_(U)
Front Seats
■
Adjustment procedure
2
1
3
Seat position adjustment switch
Seatback angle adjustment switch
Seat cushion (front) angle adjustment switch
4
5
6
Vertical height adjustment switch
Lumbar support adjustment switch
Seat cushion length adjustment switch
(if equipped for driver’s side)
17
ES350_QG_OM06136U_(U)
Head Restraints
■
Front seats
Lock release button
Vertical adjustment
1 Up
Pull the head restraints up.
2 Down
Push the head restraint down while pressing the lock release button.
Horizontal adjustment
The position of the head restraint can be adjusted forward in 4 stages.
If the head restraint is pulled forward from the foremost position, it will return to the rearmost position.
■
Rear seats
Outboard Center
1
2
Lock release button Lock release button
Up
Pull the head restraints up.
Down
Push the head restraint down while pressing the lock release button.
18
ES350_QG_OM06136U_(U)
Driving Position Memory (if equipped)
This feature automatically adjusts the front seats, steering wheel (power adjustment type) and outside rear view mirrors to suit your preferences.
■
Driving position memory
■
Recording procedure
1 Check that the shift lever is in P.
2
3
4
Turn the engine switch to IGNITION ON mode.
Adjust the driver’s seat, steering wheel, and outside rear view mirrors to the desired positions.
While pressing the “SET” button, or within 3 seconds after the “SET” button is pressed, press button “1”, “2” or “3” until the buzzer sounds.
If the selected button has already been preset, the previously recorded position will be overwritten.
■
Recall procedure
1 Check that the shift lever is in P.
2
3
Turn the engine switch to IGNITION ON mode.
Press one of the buttons for the driving position you want to recall until the buzzer sounds.
19
ES350_QG_OM06136U_(U)
■
Memory recall function (driver’s side only)
Each electronic key can be registered to recall your preferred driving position.
■
Registering procedure
1 Check that the shift lever is in P.
2 Turn the engine switch to IGNITION ON mode.
3
4
Recall the driving position that you want to record.
While pressing the recalled button, press and hold the door lock switch (either lock or unlock) until the buzzer sounds.
If the button could not be registered, the buzzer sounds continuously for approximately 3 seconds.
ES350_QG_OM06136U_(U)
20
Outside Rear View Mirrors
1
2
Selects a mirror to adjust (“L”: left or
“R”: right)
Adjust the mirror up, down, in or out using the switch
■
Folding the mirrors
Push the mirror back in the direction of the vehicle’s rear.
■
Linked mirror function when reversing (if equipped)
When the mirror select switch is in the L or R position, the outside rear view mirrors will automatically angle downwards when the vehicle is reversing in order to give a better view of the ground.
To disable this function, move the mirror select switch to the neutral position (between L and
R).
■
Adjusting the mirror angle when the vehicle is reversing
With the shift lever in R, adjust the mirror angle at a desired position. The adjusted angle will be memorized and the mirror will automatically tilt to the memorized angle whenever the shift lever is shifted to R from next time.
The memorized downward tilt position of the mirror is linked to the normal position
(angle adjusted with the shift lever in other than R). Therefore, if the normal position is changed after adjustment, the tilt position will also change. When the normal position is changed, readjust the angle in reversing.
21
ES350_QG_OM06136U_(U)
Engine (Ignition) Switch
Performing the following operations when carrying the electronic key on your person starts the engine or changes engine switch modes.
■
Starting the engine
1
2
3
Check that the parking brake is set.
Check that the shift lever is set in P.
Firmly depress the brake pedal.
4
will be displayed on the multi-information display. If it is not displayed, the engine cannot be started.
Press the engine switch shortly and firmly.
When operating the engine switch, one short, firm press is enough. It is not necessary to press and hold the switch.
The engine will crank until it starts or for up to 30 seconds, whichever is less.
Continue depressing the brake pedal until the engine is completely started.
The engine can be started from any engine switch mode.
22
ES350_QG_OM06136U_(U)
■
Stopping the engine
1
2
3
4
Stop the vehicle.
Set the parking brake, and shift the shift lever to P.
Press the engine switch.
Release the brake pedal and check that “POWER ON” on the multi-information display is off.
■
Changing engine switch modes
Modes can be changed by pressing the engine switch with the brake pedal released. (The mode changes each time the switch is pressed.)
Off
*
The emergency flashers can be used.
ACCESSORY mode
Some electrical components such as the audio system can be used.
“POWER ON” will be displayed on the multi-information display.
IGNITION ON mode
All electrical components can be used.
“POWER ON” will be displayed on the multi-information display.
*
: If the shift lever is in a position other than
P when turning off the engine, the engine switch will be turned to ACCES-
SORY mode, not to off.
23
ES350_QG_OM06136U_(U)
■
If your vehicle has to be stopped in an emergency
Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following procedure:
1
2
3
4
3
4
Steadily step on the brake pedal with both feet and firmly depress it.
Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.
Shift the shift lever to N.
If the shift lever is shifted to N
After slowing down, stop the vehicle in a safe place by the road.
Stop the engine.
If the shift lever cannot be shifted to N
Keep depressing the brake pedal with both feet to reduce vehicle speed as much as possible.
To stop the engine, press and hold the engine switch for 2 consecutive seconds or more, or press it briefly 3 times or more in succession.
Press and hold for 2 seconds or more or press briefly 3 times or more
5 Stop the vehicle in a safe place by the road.
24
ES350_QG_OM06136U_(U)
Automatic Transmission
■
Shifting the shift lever
While the engine switch is in IGNITION ON mode, move the shift lever with the brake pedal depressed.
When shifting the shift lever between P and D, make sure that the vehicle is completely stopped.
■
Shift position purpose
Shift position
P
R
N
D
S
Objective or function
Parking the vehicle/starting the engine
Reversing
Neutral
Normal driving
* 1
S mode driving
* 2
* 1 : Shifting to the D position allows the system to select a gear suitable for the driving conditions.
Setting the shift lever to the D position is recommended for normal driving.
* 2 : Selecting shift ranges using S mode restricts the upper limit of the possible gear ranges, controls engine braking force, and prevents unnecessary upshifting.
25
ES350_QG_OM06136U_(U)
■
Selecting gears in the S position
When the shift lever is in the S position, the shift lever can be operated as follows:
2
1 Upshifting
Downshifting
The selected shift range, from 1 to 6, will be displayed in the meter.
The initial shift range in S mode is set automatically to 5 or 4 according to vehicle speed. But, the initial shift range may be set to 3 if AI-SHIFT has operated while the shift lever was in the D position.
■ Shift ranges and their functions
• Automatically selecting gears between 1 and 6 according to vehicle speed and driving conditions. But, the gear is limited according to selected shift range.
• You can choose from 6 levels of engine braking force.
• A lower shift range will provide greater engine braking force than a higher shift range, and the engine speed will also increase.
26
ES350_QG_OM06136U_(U)
Turn Signal Lever
2
1
3
4
Right turn
Lane change to the right (move the lever partway and then release it)
The right hand signals will flash 3 times.
Lane change to the left (move the lever partway and then release it)
The left hand signals will flash 3 times.
Left turn
■ Customization
The number of times the turn signals flash during a lane change can be changed.
27
ES350_QG_OM06136U_(U)
Multi-information Display
The multi-information display presents the driver with a variety of vehicle data.
Drive information
Select to display various drive data.
Navigation system-linked display (if equipped)
Select to display the following navigation system-linked information.
• Route guidance
• Compass display (north-up display/heading-up display)
Audio system-linked display
Select to enable selection of an audio source or track on the display using the meter control switches.
Driving assist information
Select to display the cruise control or dynamic radar cruise control/LDA
(Lane Departure Alert with steering control) (if equipped) information, when the system is used. ( →
Warning message display
Select to display warning messages and measures to be taken if a malfunction is detected.
Settings display
Select to change the meter display settings.
28
ES350_QG_OM06136U_(U)
■
Operating the meter control switches
The multi-information display is operated using the meter control switches.
1 Select an item/change pages
2 Enter/Set
3 Return to the previous screen
4 Press:
Displays the screen registered to
When no screen has been registered, the drive information screen will be displayed.
Press and hold:
Registers the currently displayed screen to
The registration confirmation screen is displayed. If the selected screen cannot be registered, a registration failure message will be shown.
If a problem is detected in any of the vehicle’s systems, a warning message is shown on the multi-information display.
29
ES350_QG_OM06136U_(U)
Eco Driving Indicator
1
4
2
3
Eco Driving Indicator Light
During Eco-friendly acceleration (Eco driving), the Eco Driving Indicator
Light will turn on. When the acceleration exceeds the Zone of Eco driving, or when the vehicle is stopped, the light turns off.
Eco Driving Indicator Zone Display
Suggests the Zone of Eco driving with current Eco driving ratio based on acceleration.
Eco driving ratio based on acceleration
If the acceleration exceeds the Zone of
Eco driving, the right side of the Eco
Driving Indicator Zone Display will illuminate.
When this happens, the Eco Driving
Indicator Light will turn off.
Zone of Eco driving
Eco Driving Indicator will not operate under the following conditions:
● The engine is not running.
● The shift lever is in any position other than D.
● Neither normal mode nor Eco drive mode is selected. ( →
● The vehicle speed is approximately
80 mph (130 km/h) or higher.
Settings of the display and non-display of the Eco Driving Indicator Light can be changed.
30
ES350_QG_OM06136U_(U)
31
Headlights
(U.S.A.) (Canada)
4
1
2
3
The side marker, parking, tail, license plate, instrument panel lights and daytime running lights turn on.
The headlights, parking and all lights listed above (except daytime running lights) turn on.
The headlights, daytime running lights and all the lights listed above turn on and off automatically. (When the engine switch is in IGNITION
ON mode.)
Off
(U.S.A.)
(Canada)
The daytime running lights turn on.
■
Turning on the high beam headlights
1
2
With the headlights on, push the lever away from you to turn on the high beams.
Pull the lever toward you to the center position to turn the high beams off.
Pull the lever toward you and release it to flash the high beams once.
You can flash the high beams with the headlights on or off.
■
AFS (Adaptive Front-lighting System) (if equipped)
AFS (Adaptive Front-lighting System) improves visibility at intersections and on curves by automatically adjusting the lateral angle of the headlights according to vehicle speed and the degree of the tire angle that are controlled by steering input.
Operates at speed of 6 mph (10 km/h) or higher.
■
Deactivating AFS
1 Select “AFS” on (settings display) of the multi-information display.
2 Press the meter control switch.
ES350_QG_OM06136U_(U)
Automatic High Beam (if equipped)
The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of vehicles ahead, etc., and automatically turns the high beam on or off as necessary.
■
Activating the Automatic High Beam system
1 Push the lever away from you with the headlight switch in the position.
or
2 Press the Automatic High Beam switch.
The Automatic High Beam indicator will come on when the headlights are turned on automatically to indicate that the system is active.
32
ES350_QG_OM06136U_(U)
■
Turning the high beam on/off manually
● Switching to low beam
Pull the lever to the original position.
The Automatic High Beam indicator will turn off.
Push the lever away from you to activate the Automatic High Beam system again.
● Switching to high beam
Press the Automatic High Beam switch.
The Automatic High Beam indicator will turn off and the high beam indicator will turn on.
Press the switch to activate the Automatic High Beam system again.
33
ES350_QG_OM06136U_(U)
Windshield Wipers and Washer
■
Intermittent windshield wipers with interval adjuster
3
4
2
1 Temporary operation
Intermittent operation
Low speed operation
High speed operation
Wiper intervals can be adjusted when intermittent operation is selected.
5 Increases the intermittent windshield wiper frequency
6 Decreases the intermittent windshield wiper frequency
7 Washer/wiper dual operation
Wipers will automatically operate a couple of times after the washer squirts.
34
ES350_QG_OM06136U_(U)
■
Rain-sensing windshield wipers
3
4
2
1 Temporary operation
Rain-sensing wiper operation (AUTO)
Low speed operation
High speed operation
With AUTO selected, the wipers will operate automatically when the sensor detects falling rain. The system automatically adjusts wiper timing in accordance with rain volume and vehicle speed.
The sensor sensitivity can be adjusted when
AUTO is selected.
5 Increases the sensitivity
6 Decreases the sensitivity
7 Washer/wiper dual operation
Wipers will automatically operate a couple of times after the washer squirts.
35
ES350_QG_OM06136U_(U)
■
Shifting the windshield wiper position
■
To rest position
Raise the wiper in line with the windshield until it locks.
You can stand the wipers up for the rest position.
★ : More than 3.9 in. (10 cm)
■
To retract position
Lower the wipers by pressing on the upper part of the hook section.
ES350_QG_OM06136U_(U)
36
Cruise Control (if equipped)
Use the cruise control to maintain a set speed without depressing the accelerator pedal.
2
1
3
Set speed
Indicators
Cruise control switch
■
Setting the vehicle speed
1 Press the “ON/OFF” button to activate the cruise control.
Cruise control indicator will come on.
Press the button again to deactivate the cruise control.
2 Accelerate or decelerate the vehicle to the desired speed, and push the lever down to set the speed.
Cruise control “SET” indicator will come on.
The vehicle speed at the moment the lever is released becomes the set speed.
37
ES350_QG_OM06136U_(U)
■
Adjusting the set speed
1 Increases the speed
2 Decreases the speed
Fine adjustment: Momentarily move the lever in the desired direction.
Large adjustment: Hold the lever in the desired direction.
■
Canceling and resuming the constant speed control
1
2
Pulling the lever toward you cancels the constant speed control.
The speed setting is also canceled when the brakes are applied.
Pushing the lever up resumes the constant speed control.
Resuming is available when the vehicle speed is more than approximately 25 mph (40 km/h).
38
ES350_QG_OM06136U_(U)
Dynamic Radar Cruise Control (if equipped)
In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates and decelerates to match the speed changes of the preceding vehicle even if the accelerator pedal is not depressed. In constant speed control mode, the vehicle runs at a fixed speed.
Use the dynamic radar cruise control on freeways and highways.
3
4
2
1
5
Display
Set speed
Indicators
Vehicle-to-vehicle distance switch
Cruise control switch
39
ES350_QG_OM06136U_(U)
■
Setting the vehicle speed (vehicle-to-vehicle distance control mode)
1 Press the “ON/OFF” button to activate the cruise control.
Radar cruise control indicator will come on and a message will be displayed on the multi-information display.
Press the button again to deactivate the cruise control.
2 Accelerate or decelerate, with accelerator pedal operation, to the desired vehicle speed (above approximately
30 mph [50 km/h]) and push the lever down to set the speed.
Cruise control “SET” indicator will come on.
The vehicle speed at the moment the lever is released becomes the set speed.
ES350_QG_OM06136U_(U)
40
■
Adjusting the set speed
2
1 Increases the speed
Decreases the speed
Fine adjustment: Momentarily move the lever in the desired direction.
Large adjustment: Hold the lever up or down to change the speed, and release when the desired speed is reached.
■
Changing the vehicle-to-vehicle distance (vehicle-to-vehicle distance control mode)
Preceding vehicle mark
Pressing the switch changes the vehicle-tovehicle distance as follows:
1 Long
2 Medium
3 Short
The vehicle-to-vehicle distance is set automatically to long mode when the engine switch is turned to IGNITION
ON mode.
If a vehicle is running ahead of you, the preceding vehicle mark will also be displayed.
The vehicle-to-vehicle distance control mode maintains the preset cruising speed as long as no vehicle is detected ahead.
41
ES350_QG_OM06136U_(U)
■
Canceling and resuming the speed control
■
Selecting constant speed control mode
1
2
Pulling the lever toward you cancels the speed control.
The speed control is also canceled when the brake pedal is depressed.
Pushing the lever up resumes the cruise control and returns vehicle speed to the set speed.
However, cruise control does not resume when the vehicle speed is approximately 25 mph (40 km/h) or less.
1 With the cruise control off, press and hold the “ON/OFF” button for 1.5 seconds or more.
Immediately after the “ON/OFF” button is pressed, the radar cruise control indicator will come on. Afterwards, it switches to the cruise control indicator.
Switching to constant speed control mode is only possible when operating the lever with the cruise control off.
2 Accelerate or decelerate, with accelerator pedal operation, to the desired vehicle speed (at or above approximately 25 mph [40 km/h]) and push the lever down to set the speed.
Cruise control “SET” indicator will come on.
The vehicle speed at the moment the lever is released becomes the set speed.
42
ES350_QG_OM06136U_(U)
LDA (Lane Departure Alert with steering control) (if equipped)
When driving on highways and freeways with white (yellow) lines, this function alerts the driver when the vehicle might depart from its lane and provides assistance by operating the steering wheel to keep the vehicle in its lane.
The LDA system recognizes visible white (yellow) lines with the camera sensor on the upper portion of the front windshield.
■
Turning LDA system on
Press the LDA switch to turn the LDA system on.
The LDA indicator illuminates and a message is displayed on the multi-information display.
Press the LDA switch again to turn the
LDA system off.
When the LDA system is turned on or off, operation of the LDA system continues in the same condition the next time the engine is started.
43
ES350_QG_OM06136U_(U)
Intuitive Parking Assist (if equipped)
The distance from your vehicle to nearby obstacles when parallel parking or maneuvering into a garage is measured by the sensors and communicated via the multi-information display, navigation system screen or Lexus Display Audio system screen and a buzzer. Always check the surrounding area when using this system.
■
Turning the system on and off
Turns the intuitive parking assist on/off
When on, the indicator light comes on to inform the driver that the system is operational.
ES350_QG_OM06136U_(U)
44
BSM (Blind Spot Monitor) (if equipped)
The Blind Spot Monitor is a system that has 2 functions;
● The Blind Spot Monitor function
Assists the driver in making the decision when changing lanes
● The Rear Cross Traffic Alert function
Assists the driver when backing up
These functions use same sensors.
1
2
3
BSM main switch
Pressing the switch turns the system on or off. When the switch is set to on, the switch’s indicator illuminates. Common switch for Blind Spot Monitor function and Rear Cross
Traffic Alert function.
Outside rear view mirror indicator
Blind Spot Monitor function:
When a vehicle is detected in the blind spot, the outside rear view mirror indicator comes on while the turn signal lever is not operated. If the turn signal lever is operated toward the detected side, the outside rear view mirror indicator flashes.
Rear Cross Traffic Alert function:
When a vehicle approaching from the right or left rear of the vehicle is detected, the outside rear view mirror indicators flash.
Rear Cross Traffic Alert function buzzer (Rear Cross Traffic Alert function only)
When a vehicle approaching from the right or left rear of the vehicle is detected, a buzzer sounds from behind the rear seat.
45
ES350_QG_OM06136U_(U)
Driving Mode Select Switch
The driving modes can be selected to suit driving condition.
1
2
3
Normal mode
For normal driving.
Press the switch to change the driving mode to normal mode when selected to Eco drive mode or sport mode.
Eco drive mode
Use Eco drive mode to help achieve low fuel consumption during trips that involve frequent accelerating.
When not in Eco drive mode and the driving mode select switch is turned to the left, the
“ECO” indicator comes on in the multi-information display.
Sport mode
Assists acceleration response by controlling the steering and transmission. Suitable for when precise handling is desirable, for example when driving on mountain roads.
When not in Sport mode and the driving mode select switch is turned to the right, the
“SPORT” indicator comes on in the multi-information display.
46
ES350_QG_OM06136U_(U)
Tire Pressure Warning System
Your vehicle is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise.
■
The tire inflation pressure display function
The tire pressure detected by the tire pressure warning system can be displayed on the multi-information display. ( →
The illustration used is intended as an example, and may differ from the image that is actually displayed on the multi-information display.
■
Initializing the tire pressure warning system
Press and hold the tire pressure warning reset switch until the tire pressure warning light blinks slowly 3 times.
47
ES350_QG_OM06136U_(U)
Remote Touch (with navigation system)
The Remote Touch can be used to operate the Remote Touch screens.
■
Basic operation
4
6
1
2
3
5
“HOME” button
Press to display the home screen.
“ ∧ • ∨ ” button
Press to scroll the list screen and to change the scale of the map.
Back button
Press to display the previous screen.
“MENU” button
Press to display the “Menu” screen.
Remote Touch knob
Move in the desired direction to select a function, letter and screen button.
Press to enter the selected function, letter or screen button.
“ENTER” button
Press to enter the selected function, letter or screen button.
48
ES350_QG_OM06136U_(U)
■
Menu
■
Display
Press the “MENU” button on the Remote
Touch to display the “Menu” screen.
2
1 “Nav” ( →
“Radio” (
3
4
“Media” (
“Phone” ( →
5 “LEXUS App Suite”
6
7
8
“Info”
“Climate” ( →
“Setup”
9 “Display”
Press the “MENU” button on the Remote
Touch and select “Display” on the “Menu” screen.
1 Turns the screen off
2
3
Displays the screen in “Day Mode” with the headlight switch on
Adjust the screen display
4 Adjust the camera display
49
ES350_QG_OM06136U_(U)
■
Screen scroll operation
To scroll over the map screen, place the cursor mark in the desired position and then press and hold the Remote Touch knob.
1 Cursor mark
2
3
Distance from the current position to the cursor mark.
Zooms in on the map
4 Zooms out on the map
5 Select to return to the current position.
6 Select to register as a memory point.
7 Select to set as a destination.
ES350_QG_OM06136U_(U)
50
■
Setting a route
While route guidance is operating, you can change the route using the following method.
2 1
2
Press the “MENU” button on the
Remote Touch, then select “Nav.”.
Select .
3 Select “Edit Route”.
4 4
2
1
The following settings can be accessed.
Adding destinations
Deleting destinations
3 Reordering destinations
4 Route preferences
5 Route type
6 Detour setting
7 Starting from adjacent road
Some functions are unavailable while the vehicle is in motion. Refer to the “NAVIGATION
SYSTEM OWNER’S MANUAL”.
51
ES350_QG_OM06136U_(U)
Navigation System (if equipped)
■
Register home
4 1
2
3
4
Press the “MENU” button on the
Remote Touch.
Please refer to page 48 for the
Remote Touch operation.
Select “Setup”.
Select “Navigation.”.
Select “Home”.
5 5
8
9
10
6
7
11
12
13
14
Select “Set Home Location”.
Select “Address”.
Select “City”.
Enter a city name and select “OK”.
Select the desired city name.
Enter a street name and select “OK”.
Select the desired street name.
Enter a house number and select
“OK”.
Select “Enter”.
Select “OK”.
52
ES350_QG_OM06136U_(U)
■
Destination search
■
Search by address
3
4
Search by city
4
Search by street address
1
2
3
Press the “MENU” button on the
Remote Touch, then select “Nav.”.
Please refer to page 48 for the
Remote Touch operation.
Select “Dest.”.
Select “Address”.
7
8
9
4
5
6
10
11
Select “City”.
Enter a city name and select “OK”.
Select the desired city name.
Enter a street name and select “OK”.
Select the desired street name.
Enter a house number and select
“OK”.
Select “Go”.
Select “OK”.
4
5
Select “Street Address”.
6
7
8
Enter a house number and select
“OK”.
Enter a street name and select “OK”.
Select the desired street name.
Enter a city name and select “OK”.
Select the desired city name.
9
10
11
Select “Go”.
Select “OK”.
53
ES350_QG_OM06136U_(U)
■
Search by point of interest
3 1
2
3
Press the “MENU” button on the
Remote Touch, then select “Nav.”.
Please refer to page 48 for the
Remote Touch operation.
Select “Dest.”.
Select “Point of Interest”.
Hands-free System For Cellular Phone
(with navigation system)
■
Bluetooth
®
phone pairing
To use the hands-free system, it is necessary to register a Bluetooth ® phone with the system.
Please refer to the cellular phone manufacturer’s user guide for pairing procedures, or go to http://www.lexus.com/MobileLink for more phone information.
3 1
2
3
Turn the Bluetooth ® connection setting of your cellular phone on.
Press the “MENU” button on the
Remote Touch.
Please refer to page 48 for the
Remote Touch operation.
Select “Phone”.
4 4 Select “Yes” to register a phone.
54
ES350_QG_OM06136U_(U)
5
7
5
6
When this screen is displayed, search for the device name displayed on this screen on the screen of your Bluetooth ® device.
Register the Bluetooth ® device using your Bluetooth ® device.
7
8
Check that a confirmation screen is displayed indicating pairing was successful.
Check that “Connected” is displayed and registration is complete.
■
Contact transfer
5 1
2
3
4
5
6
7
Press the “MENU” button on the
Remote Touch.
Please refer to page 48 for the
Remote Touch operation.
Select “Setup”.
Select “Phone”.
Select “Contact/Call History”.
Select “Transfer Contacts from Phone”.
Transfer the contact data to the system using a Bluetooth ® phone.
Check that a confirmation screen is displayed when the operation is complete.
Contact transfer may not be possible depending on phone model.
55
ES350_QG_OM06136U_(U)
■
Calling by name
You can call by giving a name registered in the contact list. For details, refer to the
“NAVIGATION SYSTEM OWNER’S MANUAL”.
1 1
2
Press the talk switch.
Say “Call <contacts> <phone types>”.
In the same manner as it is displayed on the screen, “Call <contacts> <phone types>”, after saying “Call a contact” say the name, or the name and type of phone, of a contact.
For example: “Call a contact”, “John
Smith” or “Call a contact”, “Mary
Davis”, “Mobile”
Talk switch: Pressing this switch turns the voice command system on. Say a command after the beep.
■
Receiving a call
When a call is received, call screen is displayed with a sound.
Call screen can also be displayed on the side display.
Press on the steering wheel to talk on the phone.
To refuse to receive the call, press on the steering wheel.
■
Steering switches
2
1
3
4
Increases/decreases volume
Start the voice command system
Sending/Receiving/Phone top screen display
End call/Refuse call
56
ES350_QG_OM06136U_(U)
Audio System (with navigation system)
■
Audio control screen
Follow the procedure below to display the audio control screen.
2 1
2
Press the “MENU” button on the
Remote Touch.
Please refer to page 48 for the
Remote Touch operation.
The “Menu” screen will be displayed.
Using the Remote Touch, select
“Radio” or “Media”.
■
Remote control (steering wheel audio switches)
Some audio features can be controlled using the switches on the steering wheel.
2
1
3
Adjust volume
Radio mode: Select a radio station/ channel
Audio CD mode: Select a track
MP3/WMA/AAC disc mode: Select a file
DVD mode: Select a chapter iPod mode: Select a track/file
Select audio source
Play/Pause
Turn mute on/off
57
ES350_QG_OM06136U_(U)
■
Basic operation
1
2
3
4
5
Display the audio source selection screen
Display the sound setting screen
Adjust volume
Turn the audio system on/off
Select a radio/media mode
Play/Pause
Turn mute on/off
■
Radio
1
5
6
2
3
4
7
Display the cache radio operation buttons
Display the radio preset buttons
Scan for receivable stations/channels
Select to store artist and song title information
Display a list of receivable stations
Select a preset station/channel
Seek for a station/channel
Step up/down frequencies/channels
Move up/down the list
■
Entering station/channel presets
1 Select the desired station/channel by using the tune, the seek or the scan function.
2
3
Select “Presets”.
Select one of the screen buttons and hold it until a beep is heard, indicating that the station/channel has been set.
58
ES350_QG_OM06136U_(U)
■
DVD player/CD player
■
Playing an audio CD
1
6
7
4
5
8
2
3
9
Select a track
Rewind
Play/Pause
Select a track
Fast forward
Set repeat playback
Set random playback
Display a track list
Eject a disc
Select a track
Fast forward/rewind
Select a track
Move up/down the list
■
Playing a CD with MP3/WMA/AAC files
2
1
7
8
5
6
9
3
4
10
Select a folder
Select a file
Rewind
Play/Pause
Select a file
Fast forward
Set repeat playback
Set random playback
Display a folder list
Eject a disc
Select a file
Fast forward/rewind
Select a file
Move up/down the list
59
ES350_QG_OM06136U_(U)
■
Playing a DVD
■
Operating an iPod
3
4
5
2
1
6
7
8
Display full screen video
Select a chapter
Rewind
Stop the video screen
Play/Pause
Select a chapter
Fast forward/Slow forward
Eject a disc
Select a chapter
Fast forward/rewind
Select a chapter
1
2
3
6
7
4
5
8
Select a track
Rewind
Play/Pause
Select a track
Fast forward
Set repeat playback
Set random playback
Display the play mode selection screen
Select a track
Fast forward/rewind
Select a track
Move up/down the list
60
ES350_QG_OM06136U_(U)
Lexus Display Audio Controller
(with Lexus Display Audio System)
By using the Lexus Display Audio controller, you can control the audio system, handsfree system, etc.
■
Basic operation
2
3
1
4
Display the “Source” screen or audio top screen
Display the “Menu” screen
Back button
Display the previous screen
Turn or move the controller to select a function and number.
Move the controller to display the left or right side of the screen.
Push the controller to enter the selected function and number.
61
ES350_QG_OM06136U_(U)
■
“Menu” screen
To display the “Menu” screen, press the “MENU” button on the Lexus Display Audio controller.
Button
“Radio”
“Media”
“Climate”
“Phone”
“Connected
Navi”
*
“Info”
“Setup”
“Display”
Function
Display the radio top screen (
Display the media top screen (
Display the air conditioning control screen ( →
Display the phone top screen
If a turn-by-turn navigation application has been downloaded to a connected phone, the application will be displayed and can be used.
Display the “Information” screen
Display the “Setup” screen
Display the display settings screen
*
: Available in the 48 states, D.C. and Alaska
■
Screen for display settings
Go to “Display”: “MENU” button → “Display”
2
1
3
4
Turn off screen.
Adjust screen quality.
Adjust screen quality of the rear view monitor camera.
Change to day mode.
62
ES350_QG_OM06136U_(U)
Hands-free System For Cellular Phone
(with Lexus Display Audio System)
■
How to register a Bluetooth
®
phone
Compatible Bluetooth ® -equipped phones can be connected to the vehicle, enabling hands-free operation. Please refer to the cellular phone manufacture’s user guide for pairing procedures, or go to “www.lexus.com/MobileLink” (for U.S.A) for phone information.
1
2
Turn the Bluetooth
®
connection setting of your device set to on.
Go to “Bluetooth
*
Setup”: “MENU” button → “Setup” → “Bluetooth
*
”
3 Move the controller to the left and then select “Add Device”.
4 4
5
When this screen is displayed, search for the device name displayed on this screen on your Bluetooth ® device.
Register the Bluetooth
®
device using your Bluetooth
®
device.
63
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
■
Registering favorites
You can register the desired contact from the phonebook. Up to 15 contacts per phone can be registered.
1
2
Go to “Add Favorite”: “MENU” button → “Setup” → “Phone” → “Contacts/Call History” → “Add Favorite”
Choose the contact to register.
■
Dialing
1
2
Go to “Dial Pad”: “MENU” button → “Phone” → “Dial Pad”
Input a phone number.
3 Press the off-hook switch on the steering wheel or select .
■
Dialing from the phonebook
1
2
Go to “Contacts”: “MENU” button → “Phone” → “Contacts”
Choose the desired contact to call from the list.
3 Choose the number and then press the off-hook switch on the steering wheel or press the controller.
ES350_QG_OM06136U_(U)
■
When the phonebook is empty
You can transfer the phone numbers in a Bluetooth ® phone to the system.
Operation methods differ between PBAP (Phone Book Access Profile) compatible and
PBAP incompatible Bluetooth ® phones. If the cellular phone does not support either PBAP or OPP (Object Push Profile) service, you cannot transfer contacts.
1 Press the off-hook switch on the steering wheel.
If the phonebook is empty, a message will be displayed.
For a PBAP compatible Bluetooth ® phone and “Automatic Transfer” is off
2 To enable automatic transfer of new contacts from a cellular phone every time it is connected, select “Always”.
Select “Once” if you want to transfer new contacts from a cellular phone.
For a PBAP incompatible and OPP compatible Bluetooth
®
phone
2 Select “Transfer” and operate your cellular phone to transfer new contacts from a cellular phone.
Select “Add” if you want to add a new contact manually.
■
Dialing from favorites
You can make a call using numbers registered in the favorites.
1
2
Go to “Favorites”: “MENU” button → “Phone” → “Favorites”
Choose the desired contact to call from the list.
3 Choose the number and then press the off-hook switch on the steering wheel or press the controller.
64
ES350_QG_OM06136U_(U)
■
To answer the phone
Press the off-hook switch on the steering wheel or select .
■
To refuse a call
Press the on-hook switch on the steering wheel or select .
■
Operating a phone using the steering wheel switches
1 Volume switch
During an incoming call: Adjusts the ring tone volume
During speaking on the phone: Adjusts in call volume
The voice guidance volume cannot be adjusted using this button.
2 Talk switch
Press: Turns the voice command system on
Press and hold: Turns the voice command system off
3 Off-hook switch
• Start call
• Receiving
• Phone top screen display
4 On-hook switch
• End call
• Refuse call
65
ES350_QG_OM06136U_(U)
Audio System (with Lexus Display Audio
System)
■
Lexus Display Audio operation buttons
2
1
3
4
7
8
5
6
Eject a disc.
Disc slot
Except radio and A/V mode: Pause or resume playing a track or file.
Radio and A/V mode: Turn mute on/off.
“TUNE•SCROLL” knob
Select a radio station band, track or file.
Select preset radio stations, or access a desired track or file.
Display the radio top screen.
Display the media top screen.
“PWR•VOL” knob
Press to turn the audio system on/off, and turn to adjust the volume.
■
Using the steering wheel switches to change audio sources
Press the “MODE” switch when the audio system is turned on. The audio source changes each time the “MODE” switch is pressed.
66
ES350_QG_OM06136U_(U)
■
Audio menu screen
Go to audio menu screen: Move the controller to the left on the audio top screen
Radio mode
Button Function
“SCAN”
“SEEK”
“Tag”
Scans for receivable stations
Seeks a station of the nearest frequency (stops when a station is found)
Captures the song title and artist name information for potential purchase (when the “HD)” indicator on the selected station is appears)
“Multicast”
“Traffic”
Changes the channel of HD Radio (HD2, HD3,
HD4 where applicable)
Seeks a station of the traffic announcement
“HD Radio”
Selects to set the station list shows of HD radio on/off
“Radio Settings” Changes radio settings
“Sound Settings” Changes sound settings
FM
Target radio mode
AM, FM
AM, FM
FM
FM
AM, FM
All mode
All mode
67
ES350_QG_OM06136U_(U)
Media mode
Button
“Play”
“Pause”
“Track Up”
“Track Down”
“File Up”
“File Down”
“Folder Up”
“Folder Down”
“Fast Forward”
“Rewind”
“Repeat”
“Random”
“Shuffle”
“Full Screen”
“Connect”
“Cover Art Settings”
“iPod Settings”
“USB Settings”
“External Video
Settings”
Selects a track/file
Function
Plays or pauses a track/file
Selects a folder/album
Selects and hold: Fast-forward or rewind a track/ file
Selects a repeat mode
Selects a random/shuffle play mode
Selects a full screen mode
Connects a Bluetooth ® device
Changes the cover art settings
Changes iPod settings
Changes USB settings
Changes A/V settings
“Sound Settings” Changes sound settings
Target audio source
All media
(except A/V)
All media
(except A/V)
MP3/WMA/
AAC disc, USB
All media
(except A/V)
All media
(except A/V)
All media
(except A/V) iPod, A/V
Bluetooth ®
CD, MP3/
WMA/AAC disc,
Bluetooth ® iPod
USB
A/V
All media
68
ES350_QG_OM06136U_(U)
■
Operating the audio system using the steering wheel switches
1
2
3
Volume switch
• Press: Increases/decreases volume
• Press and hold: Continuously increases/decreases volume
Radio mode:
• Press: Selects a radio station
• Press and hold: Seeks up/down
CD, MP3/WMA/AAC disc,
Bluetooth ® , iPod or USB mode:
• Press: Selects a track/file/video
• Press and hold (except iPod):
Quickly move up/down through tracks/files/videos.
“MODE” switch
• Turns the power on, selects audio source
• Press and hold this switch to mute or pause the current operation. To cancel the mute or pause, press and hold.
69
ES350_QG_OM06136U_(U)
Air Conditioning System
■
Adjusting the temperature setting
Press to increase the temperature and to decrease the temperature.
■
Adjusting the fan speed setting
to decrease the fan speed.
Press to increase the fan speed and
Press the “OFF” button to turn the fan off.
■
Change the airflow mode
To change the air outlets, press .
Lexus Display Audio screen Navigation system screen
The air outlets used are switched each time the button is pressed.
1 Air flows to the upper body.
2 Air flows to the upper body and feet.
3 Air flows to the feet.
4 Air flows to the feet and the windshield defogger operates.
ES350_QG_OM06136U_(U)
70
■
Control screen
Lexus Display Audio screen
Navigation system screen
1
2
3
4
5
6
7
8
Adjust the left-hand side temperature setting
Adjust the fan speed setting
Select to set auto mode on/off
Select to set cooling and dehumidification function on/off
Adjust the temperature for driver and passenger seats separately (“DUAL” mode) ( →
Display the option control screen
(
Select the air flow mode
Adjust the right-hand side temperature setting
1
6
7
2
3
4
5
8
Adjust the left-hand side temperature setting
Adjust the fan speed setting
Select the air flow mode
Adjust the right-hand side temperature setting
Display the option control screen
(
Select to set automatic mode on/off
Select to set cooling and dehumidification function on/off
Adjust the temperature for driver and passenger seats separately (“DUAL” mode) ( →
71
ES350_QG_OM06136U_(U)
■
Option control screen
Select on the air conditioning control screen to display the option control screen. The functions can be switched on and off.
Lexus Display Audio screen
1
2
Prevent ice from building up on the windshield and wiper blades (if equipped)
Remove pollen from the air (micro dust and pollen filter)
Navigation system screen
■
Using the automatic mode
Press the “AUTO” button to turn on the airflow and adjust the temperature setting.
■
Adjusting the temperature for driver and passenger seats separately
(“DUAL” mode)
To turn on the “DUAL” mode, perform any of the following procedures:
● Press the “DUAL” button.
● Select “DUAL” on the option control screen.
● Adjust the passenger’s side temperature setting.
72
ES350_QG_OM06136U_(U)
Voice Command System
■
Basic operation
1
2
Press the talk switch on the steering wheel.
If you know the command:
Press the talk switch again.
If you do not know the command:
Follow the voice guidance to learn the command and then press the talk switch again.
3 Say a command after the beep.
Continue on to P.74-77 for a detailed list of Voice Commands for the following categories:
■ Important voice commands information and tips
• Voice commands can be used while driving.
• You must wait until after the beep to say a command.
• If you know what command to use, you can press the talk switch at any time to interrupt the voice guidance.
• If a desired outcome is not shown, or if no selections are available, press on the steering wheel to return to the previous screen.
NOTE: When entering voice commands you must wait until after the beep to speak.
73
ES350_QG_OM06136U_(U)
■
Command list
Basic
“Help”
Command
“Go Back”
“Go to <tab>”
“More Hints”
“Cancel”
Action
Prompts voice guidance to offer examples of commands or operation methods
Returns to the previous screen
Displays the command list of the selected tab
Displays more commonly used commands
Cancels the voice command system
Apps (vehicles with navigation system)
Command
“Launch <apps>”
Navi (vehicles with navigation system)
Action
Activates the LEXUS App Suite application
Command
“Find <POI category>”
“Enter an Address”
“Go Home”
“Pause Guidance”
“Resume Guidance”
“Show <POI> icons”
“Delete Destination”
“Previous Destination”
“Destination Assist”
Action
Displays a list of <POI category
*
> near the current position
Enables setting a destination by saying the address
Displays the route to home
Stops the route guidance
Resumes the route guidance
Displays the specified POI icons
Deletes the destination
Displays previous destinations
Connects the system to the LEXUS response center
*
: For example; “Gas stations”, “Restaurants”, etc.
74
ES350_QG_OM06136U_(U)
Phone
“Redial”
Command
“Call Back”
“Show Recent Calls”
“Dial <phone number>”
“Call <contacts> <phonetypes>”
“Mobile Assistant”
Radio
Command
“Tune to <frequency> AM”
“Tune to <frequency> FM”
“Play <genre> station”
“Tune to FM <frequency>
HD <number>”
“Tune to preset <number>”
“Tune to <name>”
“Tune to channel <number>”
“Play <genre> satellite station”
“AM Radio”
“FM Radio”
“Sirius XM”
Action
Places a call to the phone number of the latest outgoing call
Places a call to the phone number of latest incoming call
Displays the call history screen
Places a call to the said phone number
Place a call to the said phone type of the contact from the phone book
Activates Apple’s Siri
®
Eyes Free mode
Action
Changes the radio to the specified AM frequency
Changes the radio to the specified FM frequency
Changes the radio to an FM station of the specified genre
Changes the radio to the specified HD radio station
Changes the radio to the specified preset radio station
Changes the radio to the satellite radio channel with the specified name
Changes the radio to the specified satellite radio channel number
Changes the radio to a satellite radio channel of the specified genre
Selects AM radio mode
Selects FM radio mode
Selects satellite radio mode
75
ES350_QG_OM06136U_(U)
Audio
Command
“Play Playlist <name>”
“Play Artist <name>”
“Play Song <name>”
“Play Album <name>”
“Turn Music On”
“Turn Music Off”
“Disc”
“USB”
“iPod”
“Bluetooth
*
Audio”
“External”
“Auxiliary”
Action
Plays tracks from the selected playlist
Plays tracks from the selected artist
Plays the selected track
Plays tracks from the selected album
Turns the audio system on
Turns the audio system off
Selects the selected disc mode
Selects USB audio mode
Selects iPod audio mode
Selects Bluetooth ® audio mode
Selects VTR mode
Selects AUX audio mode
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Info (vehicles with navigation system)
Command
“Destination Assist”
“Show Forecast”
“Show Traffic”
Action
Connects the system to the Lexus response center
Displays weather information
Displays traffic information
76
ES350_QG_OM06136U_(U)
Climate
Command
“Turn Climate Control On”
“Turn Climate Control Off”
“Warmer”
“Cooler”
“<#> degrees”
Action
Turns air conditioning system on
Turns air conditioning system off
Increases the temperature of the air conditioning system
Decreases the temperature of the air conditioning system
Changes the set temperature of the air conditioning system to <#> degrees
*
*
: Only within the possible temperature range of the air conditioning system
Commands relating to operation of the audio/visual and air conditioning systems can only be performed when the audio and air conditioning systems are turned on. Refer to the
“OWNER’S MANUAL” and “NAVIGATION SYSTEM OWNER’S MANUAL”.
77
ES350_QG_OM06136U_(U)
Portable Audio Device Ports
These ports can be used to connect a portable audio device and listen to it through the vehicle’s speakers.
Open the console box, open the cover and connect the portable audio device.
Seat Heaters and Ventilators (if equipped)
1
2
Heats the seat
The indicator light comes on.
The higher the number of dots, the warmer the seat becomes.
Blows air from the seat
The indicator light comes on.
The higher the number of dots, the stronger the airflow becomes.
78
ES350_QG_OM06136U_(U)
Rear Sunshade/Rear Door Sunshades
(if equipped)
■
Rear sunshade
The rear sunshade can be raised and lowered by operating the button shown below.
Raise/lower
■
Rear door sunshades
Pull the tab of the rear door sunshade and hook the sunshade on the anchors.
To retract the rear door sunshade, unhook the sunshade and retract it slowly.
79
ES350_QG_OM06136U_(U)
Trunk Storage Extension
Long objects can be loaded into the vehicle by utilizing the trunk space and rear seat area.
1 Fold down the armrest.
2 Fold down the handle and open the armrest door.
ES350_QG_OM06136U_(U)
80
81
Garage Door Opener
The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, security systems, and other devices.
■
Programming HomeLink
®
The HomeLink ® wireless control system in your vehicle has 3 buttons which can be programmed to operate 3 different devices. Refer to the programming methods on the following pages to determine the method which is appropriate for the device.
2
1
3
4
HomeLink ® indicator light
Garage door operation indicators
HomeLink ® icon
Illuminates while HomeLink ® is operating.
Buttons will stop flashing and programming will not be able to be completed.
1 Press and release the HomeLink ® button you want to program and check that the
HomeLink ® indicator light flashes (orange).
2 Point the remote control transmitter for the device at the rear view mirror, 1 to 3 in. (25 to 75 mm) from the Home-
Link ® buttons.
Keep the HomeLink ® indicator light in view while programming.
3 Program a device.
Programming a device other than an entry gate (for U.S.A. owners)
Press and hold the handheld transmitter button until the HomeLink ® indicator light changes from slowly flashing orange to rapidly flashing green (rolling code) or continuously lit green
(fixed code), then release the button.
ES350_QG_OM06136U_(U)
4
5
Programming an entry gate (for U.S.A. owners)/Programming a device in the
Canadian market
Press and release the remote control transmitter button at 2 second intervals, repeatedly, until the HomeLink ® indicator light changes from slowly flashing (orange) to rapidly flashing (green) (rolling code) or continuously lit (green) (fixed code).
Test the HomeLink ® operation by pressing the newly programmed button and observing the indicator light:
● Indicator light illuminates: Programming of a fixed code device has completed. The garage door or other device should operate when a HomeLink ® button is pressed and released.
● Indicator light flashes rapidly: The garage door opener motor or other device is equipped with a rolling code. To complete programming, firmly press and hold the
HomeLink ® button for 2 seconds then release it.
● If the garage door or other device does not operate, proceed to “Programming a rolling code system”.
Repeat the steps above to program another device for any of the remaining Home-
Link ® buttons.
■
Programming other devices
For U.S.A. owners:
To program an entry gate, see the OWNER’S MANUAL.
To program other devices, contact your Lexus dealer.
For Canadian owners:
To program all other devices, follow the same procedure as for garage door programming.
■
Operating HomeLink
®
Press the appropriate HomeLink
®
button. The HomeLink
®
indicator light should turn on.
82
ES350_QG_OM06136U_(U)
LEXUS Enform Safety Connect
(for U.S.A., if equipped)
Safety Connect is a subscription-based telematics service that uses Global Positioning
System (GPS) data and embedded cellular technology to provide safety and security features to subscribers. Safety Connect is supported by Lexus’ designated response center, which operates 24 hours per day, 7 days per week.
Safety Connect service is available by subscription on select, telematics hardwareequipped vehicles.
■
System components
2
1
3
“SOS” button
LED light indicators
Microphone
83
ES350_QG_OM06136U_(U)
■
Services
Subscribers have the following Safety Connect services available:
● Automatic Collision Notification
*
In case of either airbag deployment or severe rear-end collision, the system is designed to automatically call the response center. The responding agent receives the vehicle’s location and attempts to speak with the vehicle occupants to assess the level of emergency. If the occupants are unable to communicate, the agent automatically treats the call as an emergency, contacts the nearest emergency services provider to describe the situation, and requests that assistance be sent to the location.
*
:
U.S. Patent No. 7,508,298 B2
● Stolen Vehicle Location
If your vehicle is stolen, Safety Connect can work with local authorities to assist them in locating and recovering the vehicle. After filing a police report, call the Safety Connect response center at 1-800-25-LEXUS (1-800-255-3987) and follow the prompts for
Safety Connect to initiate this service.
In addition to assisting law enforcement with recovery of a stolen vehicle, Safety-Connect-equipped vehicle location data may, under certain circumstances, be shared with third parties to locate your vehicle. Further information is available at Lexus.com.
● Emergency Assistance Button (SOS)
In the event of an emergency on the road, push the “SOS” button to reach the Safety
Connect response center. The answering agent will determine your vehicle’s location, assess the emergency, and dispatch the necessary assistance required.
If you accidentally press the “SOS” button, tell the response-center agent that you are not experiencing an emergency.
● Enhanced Roadside Assistance
Enhanced Roadside Assistance adds GPS data to the already included warranty-based
Lexus roadside service.
Subscribers can press the “SOS” button to reach a Safety Connect response-center agent, who can help with a wide range of needs, such as: towing, flat tire, fuel delivery, etc.
For a description of the Roadside Assistance services and their limitations, please see the
Safety Connect Terms and Conditions, which are available at Lexus.com.
■
Subscription
After you have signed the Telematics Subscription Service Agreement and are enrolled, you can begin receiving services.
A variety of subscription terms are available. Contact your Lexus dealer, call 1-800-25-
LEXUS (1-800-255-3987) or push the “SOS” button in your vehicle for further subscription details.
84
ES350_QG_OM06136U_(U)
85
Lexus Enform (for U.S.A., if equipped)
Lexus Enform is a service that includes Safety Connect, Service Connect, Remote, Destinations and App Suite.
For details, refer to the “OWNER’S MANUAL” and “NAVIGATION SYSTEM
OWNER’S MANUAL”.
■
Function achieved by using a cellular phone (with navigation system)
■
Services
Of the functions included with Lexus Enform, only LEXUS App Suite can be achieved by using a cellular phone.
LEXUS App Suite is a service that enables the usable contents of a cellular phone to be displayed on and operated from the navigation screen. Before LEXUS App Suite can be used, a few settings need to be performed.
● LEXUS App Suite
When LEXUS App Suite is activated, an application may need to update. By updating, an application can be kept the latest version. To updating the application, it is necessary to download the updated data and install it.
■
Subscription
LEXUS App Suite will be available on a trial period included upon purchase of a new vehicle. User registration is required to start using the service.
When a trial period has elapsed after purchasing a new vehicle, a fee will be charged to renew the contract. Services requiring a separate contract can also be used. For details, refer to http://www.lexus.com/enform/ or call 1-800-255-3987.
■
Function achieved by using DCM and the navigation system (with navigation system)
■
Services
Of the functions included with Lexus Enform and LEXUS Enform Destinations (Destination
Assist) can be achieved by making DCM cooperate with the navigation system.
These are subscription-based telematics services that use Global Positioning System (GPS) data, embedded cellular technology to provide safety and security as well as convenience features to subscribers. The services are supported by Lexus’ designated response center, which operates 24 hours a day, 7 days a week.
The services are available by subscription on select, telematics hardware-equipped vehicles.
● Destination Assist
Destination Assist provides you with live assistance for finding destinations via the Lexus response center. You can request either a specific business, address, or ask for help locating your desired destination by category, such as restaurants, gas stations, shopping centers or other points of interest (POI).
After you tell the agent your choice of destination, its coordinates are sent wirelessly to your vehicle’s navigation system.
ES350_QG_OM06136U_(U)
■
Subscription
After you have signed the Telematics Subscription Service Agreement and are enrolled, you can begin receiving services. A variety of subscription terms are available.
Contact your Lexus dealer, call 1-800-25-LEXUS (1-800-255-3987), or select the “Destination Assist” in your vehicle for further subscription details.
■
Function achieved by using DCM
■
Services
Of the functions included with Lexus Enform Safety Connect, Safety Connect can be achieved by using DCM.
● Lexus Enform Safety Connect ( →
■
LEXUS Enform Remote
■
Services
LEXUS Enform Remote is a cellular phone application that lets you view and remotely control certain aspects of your vehicle.
For details about the functions and services of this application, refer to http://www.lexus.com/enform/. For further details, contact your Lexus dealer.
Function of the Lexus Enform Remote is achieved by using an embedded cellular device in the vehicle (DCM: Data Communication Module).
■
Subscription
→
86
ES350_QG_OM06136U_(U)
■
LEXUS Enform Service Connect
■
Services
LEXUS Enform Service Connect uses embedded telematics hardware to collect and transmit vehicle data that allows Lexus to provide:
● Vehicle Health Report (VHR)
(Safety Recalls, Service Campaigns, Current Vehicle Alerts, Required Maintenance and
Vehicle Condition Status)
● Maintenance Notifications
● Vehicle Alert Notifications
For details about this service and how to register, refer to http://www.lexus.com/enform/.
The Lexus Enform Service Connect is achieved by using a Data Communication Module
(DCM) built into the vehicle.
■
Subscription
→
XM Satellite Radio
An XM Satellite Radio is a tuner designed exclusively to receive broadcasts provided under a separate subscription.
For details, refer to the “OWNER’S MANUAL” and “NAVIGATION SYSTEM
OWNER’S MANUAL”.
■
Subscription
For XM Services requiring a subscription (such as XM Radio), the following paragraph shall be included.
Required XM Radio monthly subscriptions sold separately after trial period. Subscription fee is consumer only. All fees and programming subject to change. Subscriptions are subject to the Customer Agreement available at www.siriusxm.com. (U.S.A.) or www.xmradio.ca (Canada) XM service only available in the 48 contiguous United States and 10 Canadian provinces.
For more information, program schedules, and to subscribe or extend subscription after complimentary trial period; more information is available at:
U.S.A. Customers:
Visit www.siriusxm.com or call 1-877-447-0011
Canadian Customers:
Visit www.xmradio.ca or call 1-877-438-9677
87
ES350_QG_OM06136U_(U)
Door Locks
■
Door lock switch
2
1 Locks all the doors
Unlocks all the doors
■
Inside lock button
2
1 Locks the door
Unlocks the door
The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position.
ES350_QG_OM06136U_(U)
88
■
Rear door child-protector lock
The door cannot be opened from inside the vehicle when the lock is set.
1 Unlock
2 Lock
These locks can be set to prevent children from opening the rear doors.
Push down on each rear door switch to lock both rear doors.
Power Windows
■
Power window switches
■
Window lock switch
1
2
Closing
One-touch closing
*
3 Opening
4 One-touch opening
*
*
: To stop the window partway, operate the switch in the opposite direction.
Press the switch down to lock the passenger window.
Use this switch to prevent children from accidentally opening or closing a passenger window.
89
ES350_QG_OM06136U_(U)
Moon Roof
■
Opening and closing
Standard type
Glass type
1 Opens the moon roof
*
The moon roof stops slightly before the fully open position to reduce wind noise.
Press the switch again to fully open the moon roof.
2 Closes the moon roof
*
*
: Lightly press either way of the moon roof switch to stop the moon roof partway.
1 Opens the moon roof
2 Closes the moon roof (push and hold)
*
*
: The moon roof stops once. Push and hold the switch again to fully close.
ES350_QG_OM06136U_(U)
90
■
Tilting up and down
Standard type
Glass type
1 Tilts the moon roof up
*
2 Tilts the moon roof down
*
*
: Lightly press either way of the moon roof switch to stop the moon roof partway.
1 Tilts the moon roof up
*
2 Tilts the moon roof down (push and hold)
*
: Lightly press either way of the moon roof switch to stop the moon roof partway.
91
ES350_QG_OM06136U_(U)
Fuel Tank Cap
■
Before refueling the vehicle
● Turn the engine switch off and ensure that all the doors and windows are closed.
● Confirm the type of fuel.
■
Opening the fuel tank cap
1 Press the opener switch to open the fuel filler door.
2 Turn the fuel tank cap slowly to open and hang it on the back of the fuel filler door.
ES350_QG_OM06136U_(U)
92
Trunk
■
Opening the trunk
● From inside the vehicle
Press the opener switch.
If the vehicle is equipped with a power trunk opener and closer, the trunk lid automatically opens fully
Turn the main switch in the glove box off to disable the trunk opener.
1 On
2 Off
The trunk lid cannot be opened even with the wireless remote control or the trunk release button.
● From outside the vehicle
• Smart access system with push-button start
While carrying the electronic key, press the button on the trunk lid.
When all the doors are unlocked with the power door lock system, the trunk can be opened without carrying the electronic key.
If the vehicle is equipped with power trunk opener and closer, the trunk lid automatically opens fully.
• Wireless remote control
Press and hold the switch
If the vehicle is equipped with a power trunk opener and closer, the trunk lid automatically opens fully.
93
ES350_QG_OM06136U_(U)
■
Trunk easy closer (vehicles with power trunk opener and closer)
In the event that the trunk lid is left slightly open, the trunk easy closer will automatically close it to the fully closed position.
■
Trunk closer switch (vehicles with power trunk opener and closer)
Pressing the switch closes the trunk lid automatically. (A buzzer sounds.)
Pressing the switch while the trunk lid is closing opens the trunk lid again.
ES350_QG_OM06136U_(U)
94
What to do if...
List of Warning/Indicator Lights
Immediately stop the vehicle in a safe place and contact your Lexus dealer.
Continuing to drive the vehicle may be dangerous.
(U.S.A.)
Brake system warning light
(Canada)
Have the vehicle inspected by your Lexus dealer immediately.
PCS warning light
* 1
(U.S.A.)
Malfunction indicator lamp
(Canada)
(Flashes)
Electric power steering system warning light
SRS warning light Slip indicator light
(U.S.A.)
ABS warning light
(Canada)
Follow the correction procedures.
Low fuel level warning light
(Blinking and then continuously on)
Tire pressure warning light
Seat belt reminder light
(Illuminates without blinking)
Tire pressure warning light
* 2
Master warning light “AFS OFF” indicator
(Flashes)
For further information, refer to the OWNER’S MANUAL.
* 1
95
ES350_QG_OM06136U_(U)
What to do if...
See the OWNER’S MANUAL
Turn signal indicator
Headlight indicator (U.S.A.)
Tail light indicator (Canada)
Headlight high beam indicator
Automatic High Beam indicator
* 1
Fog light indicator
Intuitive parking assist indicator
* 1
(Flashes)
Slip indicator light
VSC OFF indicator
PCS warning light
* 1
BSM outside rear view mirror indicators
* 1
“AIR BAG ON/OFF” indicator
Eco Driving Indicator Light
Cruise control indicator
Radar cruise control indicator
* 1
Cruise control “SET” indicator
(U.S.A.)
(Canada)
Parking brake indicator
Low outside temperature indicator
LDA indicator
* 1
For further information, refer to the OWNER’S MANUAL.
* 1 : If equipped
* 2 : It also comes on due to natural causes such as natural air leaks and tire inflation pressure changes caused by temperature. Adjust the tire inflation pressure to the specified level.
The light will turn off after a few minutes. In case the light does not turn off even if the tire inflation pressure is adjusted, have the system checked by your Lexus dealer.
96
ES350_QG_OM06136U_(U)
What to do if...
If the electronic key does not operate properly
■
Unlocking and locking the doors
Use the mechanical key (
perform the following operations:
2
1 Locks all the doors
Closes the windows and moon roof
*
(turn and hold)
3 Unlocks the door
Turning the key rearward unlocks the driver’s door. Turning the key once again within 5 seconds unlocks the other doors.
4 Opens the windows and moon roof
*
(turn and hold)
*
: This setting must be customized at your
Lexus dealer.
■
Unlocking the trunk
Turn the mechanical key clockwise to open.
An alarm will sound if the alarm is set.
( →
97
ES350_QG_OM06136U_(U)
What to do if...
■
Starting the engine
1
2
3
Ensure that the shift lever is in P and depress the brake pedal.
Touch the Lexus emblem side of the electronic key to the engine switch.
The engine switch will turn to IGNI-
TION ON mode.
When the smart access system with push-button start is deactivated in customization setting, the engine switch will turn to ACCESSORY mode.
Firmly depress the brake pedal and check that is shown on the multi-information display.
4 Press the engine switch.
In the event that the engine still cannot be started, contact your Lexus dealer.
If the electronic key battery becomes depleted, replace it with a new battery. For instructions on replacing the battery, refer to the OWNER’S MANUAL. If you need further assistance, contact your Lexus dealer.
If the engine doesn’t start
Make sure that the correct operating procedures have been followed.
Brake pedal
Make sure that the brake pedal is firmly depressed when attempting to start the engine. ( →
If the engine still does not start, see the OWNER’S MANUAL for more information or contact your Lexus dealer.
98
ES350_QG_OM06136U_(U)
Memo
99
ES350_QG_OM06136U_(U)
ES350_QG_OM06136U_(U)
100
Memo
101
ES350_QG_OM06136U_(U)
Your Lexus dealer
Your Lexus dealer will provide quality maintenance and any other assistance you may require.
If there is not a Lexus dealer near you, please call the following number:
■ U.S. OWNERS
● In the U.S. mainland or Canada:
Lexus Roadside Assistance
1-800-25-LEXUS or 1-800-255-3987 (Toll-Free)
● In Hawaii:
Servco Automotive Roadside Assistance/Customer Services
1-800-25-LEXUS or 1-800-255-3987 (Toll-Free)
■ CANADIAN OWNERS
● In Canada or the U.S. mainland:
Lexus Roadside Assistance/Customer Service
1-800-26-LEXUS or 1-800-265-3987 (Toll-Free)
Please access our websites for further information.
● The U.S. mainland: www.lexus.com
● Hawaii: www.servcolexus.com
● Canada: www.lexus.ca
©2017 TOYOTA MOTOR CORPORATION
All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of Toyota Motor Corporation.
102
ES350_QG_OM06136U_(U)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement