- Computers & electronics
- TVs & monitors
- Wall & ceiling mounts accessories
- Craftex CX Series
- CX416
- Owner's manual
Craftex CX Series CX416 CX SERIES 1 HP WALL MOUNTED DUST COLLECTOR Owner Manual
Add to my manuals13 Pages
Craftex CX Series CX416 is a 1-HP wall-mounted dust collector designed for collecting sawdust generated by woodworking machinery. It features a powerful 1-HP motor that delivers 537 CFM of air suction capacity and a 7.2” of static pressure, making it suitable for a variety of woodworking applications. The CX416 has a 4” main inlet and a 10” radial fin impeller for efficient dust collection. It also includes a collection bag with a clear window and bottom zip for easy emptying. With its compact design and easy installation, the CX416 is a great choice for small workshops and hobbyists.
advertisement
CX416
1-HP WALL MOUNT PORTABLE
DUST COLLECTOR
USER
TABLE OF CONTENTS
General Safety Instructions............................................................. 3
CX416 Specific Safety Instructions ................................................. 4
Features.......................................................................................... 5
Physical Features ........................................................................... 6
Proper Grounding ........................................................................... 7
Unpacking & Inventory.................................................................... 8
Assembly ........................................................................................ 8
Test Run ........................................................................................10
Operation ........................................................................................10
Maintenance ...................................................................................10
Lubrication ......................................................................................10
Impeller ...........................................................................................11
Machine Storage.............................................................................11
Emptying Collection Bag.................................................................11
Parts Diagram .................................................................................12
Parts List.........................................................................................12
Warranty .........................................................................................13
2
GENERAL SAFETY INSTRUCTIONS
Extreme caution should be used when operating all power tools. Know your power tool, be familiar with its operation, read through the owner’s manual and practice safe usage procedures at all times.
CONNECT your machine only to the matched and specific power source.
DISCONNECT the power source when changing drill bits, hollow chisels, router bits, shaper heads, blades, knives or making other adjustments or repairs. ALWAYS wear safety glasses respirators, hearing protection and safety shoes, when operating your machine.
SECURE WORK . Use clamps or a vise to hold work when practical. It’s safer than using your hand and frees both hands to operate tool. DO NOT wear loose clothing or jewelry when operating your machine.
GROUND ALL TOOLS if tool is equipped with three-prong plug, it should be plugged into a three-hole
BE ALERT! DO NOT use prescription or other drugs that may affect your ability or judgment to safely use your machine. electrical receptacle. If an adapter is used to accommodate a two-prong receptacle, the adapter plug must be attached to a known ground. Never remove the third prong.
MAINTAIN TOOLS IN TOP
CONDITION . Keep the blades sharp and aligned. Follow instructions for lubricating and changing accessories.
A SAFE ENVIRONMENT is important. Keep the area free of dust, dirt and other debris in the immediate vicinity of your machine.
DISCONNECT TOOLS before servicing and when changing accessories such as blades, bits, cutters, etc.
ALWAYS keep all safety guards in place and ensure their proper function.
KEEP CHILDREN AND VISITORS
AWAY . All children and visitors should be kept a safe distance from work area.
ALWAYS operate machinery in well ventilated areas and use wood dust collection systems whenever possible.
NEVER leave a tool unattended while the machine is in operation.
DON’T OVERREACH . Keep proper footing and balance at all times.
ALWAYS read and understand the user manual before starting the machine.
Failure to do so, could result in serious personal injury or damage to the machine.
3
CX416 WALL MOUNT DUST COLLECTOR
SPECIFIC SAFETY INSTRUCTIONS
Read and understand the instruction manual before operating the dust collector.
Basic precautions listed below should always be followed when using your dust collector to reduce the risk of injury, electrical shock or fire.
The CX416 is designed to collect Never operate the dust collector with all sawdust only . blast gates closed.
Never attempt to use this dust collector to vacuum water or any other liquids.
Never try to use this dust collector to collect large wood pieces.
Never attempt to use this dust collector to collect metal materials such as screws, nails or other metal parts.
Always wear respiratory and safety glasses when emptying dust from the collection bags.
Always disconnect the dust collector from its power source when changing or emptying the bags.
Always be sure that the collection and filter bags are securely fastened to collector body.
Do not place your hand or tools nears the open inlet while operation. Serious personal injury or damage to the machine can happen.
Always connect dust collector to the matched power source.
IMPORTANT
The safety instructions given above can not be complete because the environment in every shop is different. Always consider safety first as it applies to your individual working conditions .
4
CX416
FEATURES
MODEL CX416 1-HP WALL MOUNT DUST COLLECTOR
As part of the growing line of Craftex woodworking equipment, we are proud to offer the
CTX416. By following the instructions and procedures laid out in this owner’s manual, you will receive years of excellent service and satisfaction. The CX416 is a professional tool and like all power tools, proper care and safety procedures should be adhered to .
Bearings ................................. Sealed & Permanently Lubricated
Max. Static Pressure .............. 7.2”
Collection Bag with a Clear Window and Bottom Zip
Weight .................................... 52 lbs
Warranty ................................. 3 Years
5
CX416 - WALL MOUNT DUST COLLECTOR
PHYSICAL FEATURES
Handle
ON/OFF
Switch
Wall Mounting
Bracket
Clear
Window
Motor
Bracket
1-HP
Motor
Collection
Bag
6
PROPER GROUNDING
Grounding provides a path of least resistance for electric current to reduce the risk of electric shock.
To prevent electrical hazards, have a qualified electrician ensure that the line is properly wired.
This machine is for use on a normal 110 volts circuit. Make sure that the machine is connected to an outlet having the same configuration as the plug. If an adaptor plug is used, it must be attached to the metal screw of the receptacle.
WARNING!
Improper connection of the equipmentgrounding conductor can result in a risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.
It is strongly recommended not to use extension cords with your CX416. Always try to position your machine close to the power source so that you do not need to use extension cords.
If it necessary to use an extension cord, make sure the extension cord does not exceed 50-feet in length and the cord is 14gauge to prevent motor damage. Check for heat build up periodically.
Your CTX416 should be wired with a 3prongs plug fitting a 3 prong grounded receptacles as shown in figure-1. Do not remove the grounding prong to fit it into a 2pronged outlet. Always check with a qualified electrician if you are in doubt.
Figure-1 110-Volts Outlet for CX416
7
UNPACKING
The machine is properly packaged and shipped completely in a carton for safe transportation. When unpacking, carefully inspect the carton and ensure that nothing has been damaged during transit. Open it and check that the machine and the parts are in good condition.
CONTENTS QTY
A. Collector Body & Motor Assembly ...... 1
B. Motor Bracket ..................................... 1
C. Wall Mounting Bracket ....................... 1
D. Dust Collection Bag............................ 1
E. Bag Clamp ......................................... 1
F. Foam Strip.......................................... 1
G. Wrench............................................... 1
H. Hardware Bag .................................... 1
While doing inventory, if you can not find any part, check if the part has already been installed on the machine. Some parts come pre-assembled for shipping purposes.
ASSEMBLY
To assemble your CX416 Wall Mount Dust
Collector, follow the instructions given below.
Align the holes on the motor bracket with the holes on the motor base and attach the motor bracket to the motor base using four bolts provided as shown in figure-1.
Figure-1 Attaching motor bracket to the motor base
Take the wall mounting bracket and use it as a template on the wall. Mark the mounting the holes with a pen and make sure the mounting bracket is 44” (minimum) from the floor and 6” (minimum) away from the wall so that the motor have enough air cooling space.
Figure-2 Installing the wall mounting bracket
If you are installing the wall mounting bracket on a concrete or masonry wall, use lag screws with lag shield or anchor studs.
8
If you are mounting the mounting bracket to a framed wall, the bracket must be attached to a support board that is wide enough to be mounted on two wall studs and having the capacity of holding the dust collector with collection bag full of dust. Secure the support board to the wall studs, using lag screws. See figure-3.
Installing the dust collection bag and secure it using bag clamp (provided). See figure-5.
Figure-3 Installing wall mounting bracket on a support board on the wall studs
Once the mounting bracket is installed on the wall, lift the dust collector up and hang it on the bracket.
Install the adhesive foam strip (provided) on the dust collector outlet port as shown in figure-4.
Figure-5 Installing the collection bag
Figure-4 Installing adhesive foam strip
9
TEST RUN
Now that you have assembled your machine completely, it is time for a test run to make sure that the machine works properly and is ready for operation.
All the tools and objects used for assembling the machine should be removed and cleared away during the test run. Double check and ensure that the wall mounting bracket is secured properly to the wall.
WARNING!
Before starting the dust collector, make sure that you have read and understood the manual and you are familiar with the functions and safety features on this machine. Failure to do so may cause serious personal injury.
Plug the cord to the power outlet and turn the dust collector ON. See if the dust collector operates correctly.
During the test run if there is any unusual noise coming from the machine or the machine vibrates excessively, shut off the machine immediately and disconnect the cord from the power source. Check all the parts you have assembled once again and investigate to find out the problem.
If the dust collector operates correctly, turn the machine OFF and remove the safety key on the switch.
Once the safety key is removed, turn the switch ON.
The machine should not run with the safety key removed.
OPERATION
CX416 wall mount dust collector is designed to be used with one machine at a time.
Operating this dust collector is simple and easy. Position the machine close to the dust collector, making sure that it is not interfering with each other.
Connect a hose with one end to the dust collector inlet and the other end to the machine outlet. Secure both ends using hose clamps.
MAINTENANCE
During the life of your machine, you will need to practice some regular maintenance to keep your saw in peak performance condition.
WARNING!
Make sure the machine is turned off and the cord is disconnected from the power source before servicing and removing/replacing any components on the machine.
Check the dust collector daily for loose mounting bolts/screws, damaged wires, worn switch, full collection bag and any other unsafe condition.
LUBRICATION
The shaper has sealed lubricated bearings in the motor housing and arbour assembly and do not require any lubrication.
10
IMPELLER
The impeller screw might get loosened with use after a period of time. Check the impeller once a month to ensure that impeller screws are tight, securing the impeller on the shaft.
Make sure the machine is turned off and the cord is disconnected from the power source.
Access the impeller screws through the inlet cover on the machine and tighten to secure the impeller on the shaft.
MACHINE STORAGE
When the dust collector is not in use, disconnect the cord from the power source and store the machine in a dry place. Do not expose the machine to rain. Make sure to keep the cord away from potential damage sources such as; sharp objects, chemicals, heat sources and water.
EMPTYING COLLECTION
BAG
The collection bag on your dust collector must be checked and emptied regularly.
The machine operates at a much higher level of efficiency when the collection bag is empty.
The CT167 features a collection bag with a clear window and a bottom zip. The clear window allows operator to see the amount of dust in the bag and the bottom zip makes bag-emptying easy.
11
12
WARRANTY
CRAFTEX 3 YEAR LIMITED WARRANTY
Craftex warrants every product to be free from defects in materials and agrees to correct such defects where applicable. This warranty covers three years for parts and 90 days for labour (unless specified otherwise), to the original purchaser from the date of purchase but does not apply to malfunctions arising directly or indirectly from misuse, abuse, improper installation or assembly, negligence, accidents, repairs or alterations or lack of maintenance.
Proof of purchase is necessary .
All warranty claims are subject to inspection of such products or part thereof and Craftex reserves the right to inspect any returned item before a refund or replacement may be issued.
This warranty shall not apply to consumable products such as blades, bits, belts, cutters, chisels, punches etceteras.
Craftex shall in no event be liable for injuries, accidental or otherwise, death to persons or damage to property or for incidental contingent, special or consequential damages arising from the use of our products.
RETURNS, REPAIRS AND REPLACEMENTS
To return, repair, or replace a Craftex product, you must visit the appropriate Busy Bee Tools showroom or call 1-
800-461-BUSY. Craftex is a brand of equipment that is exclusive to Busy Bee Tools.
For replacement parts directly from Busy Bee Tools, for this machine, please call 1-800-461-BUSY (2879), and have your credit card and part number handy.
All returned merchandise will be subject to a minimum charge of 15% for re-stocking and handling with the
following qualifications.
Returns must be pre-authorized by us in writing.
We do not accept collect shipments.
Items returned for warranty purposes must be insured and shipped pre-paid to the nearest warehouse
Returns must be accompanied with a copy of your original invoice as proof of purchase. Returns must be in an un-used condition and shipped in their original packaging a letter explaining your reason for the return.
Incurred shipping and handling charges are not refundable.
Busy Bee will repair or replace the item at our discretion and subject to our inspection.
Repaired or replaced items will be returned to you pre-paid by our choice of carriers.
Busy Bee reserves the right to refuse reimbursement or repairs or replacement if a third party without our
prior authorization has carried out repairs to the item.
Repairs made by Busy Bee are warranted for 30 days on parts and labour.
Any unforeseen repair charges will be reported to you for acceptance prior to making the repairs.
The Busy Bee Parts & Service Departments are fully equipped to do repairs on all products purchased from us with the exception of some products that require the return to their authorized repair depots. A Busy Bee representative will provide you with the necessary information to have this done.
For faster service it is advisable to contact the nearest Busy Bee location for parts availability prior to bringing your product in for repairs.
13
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project