EVF-1122S/96-FG
Single 12” Two-Way
90° x 60° Full-Range
Fully-Weatherized
Loudspeaker System
Key Features:
• Fully Weatherized Fiberglass Finish with Gland
Nut and Stainless Steel Grille
• ND2B 2” (51mm) Diaphragm, 1.4” (36mm) Exit
Pure Titanium Compression Driver
• SMX2121 12” (305mm) LF Transducer with Fully
Symmetric Drive
• Advanced 4 th Order Crossover Network with HF
Protection
• Coverage Pattern: 90° x 60° Constant
Directivity TM 12” Rotatable Waveguide
• 98 dB Sensitivity, 131 dB Maximum SPL
• System Rating: 500W Continuous, (2000W Peak)
• Active Rating: LF400W/HF40W Continuous
(1600W/160W Peak)
• (22) M10 Threaded Suspension Points
General Description:
The Electro-Voice® EVF-1122S/96-FG is a fully-weatherized, fiberglass-coated, high power, 2-way loudspeaker system that can be used in a variety of applications where high quality sound reinforcement is required in a compact, lightweight package.
The EVF-1122S/96-FG utilizes the ND2B, a high output 2” titanium compression driver, coupled to a Constant Directivity™ 90° x 60° waveguide. The SMX2121 12” woofer used FEA optimization for motor, suspension, and electrical design for very low distortion, high efficiency, and maximum intelligibility at high SPL levels. The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, linear off-axis response, and a protection circuit for long term reliability.
The EVF-1122S/96-FG features make it ideal for many fixed install applications, including applications with full exposure to outdoor elements. The trapezoidal enclosure is constructed out of weather resistant birch, and coated with fiberglass for maximum protection from extreme outdoor elements. The unique acoustic and rigging design allows for vertical and horizontal clusters to be built using any combination of loudspeakers from the entire EVF & EVH Series, with 7 horn patterns to choose from and an assortment of Low Frequency and subwoofer loudspeakers, it gives you the tools to maximize flexibility of system design, no matter what the application and budget. The innovative input panel provides phoenix style connectors (included in all standard models) and gland nut cover plate (for weatherizing applications). An externally accessible jumper selects passive or active operation. An available 70.7/100 Volt transformer kit simply mounts to the input panel for use in distributed systems.
All these features give you the flexibility to do a large range of venues in extreme environments with fewer items in inventory and quickly support your customer’s requirements.
Technical Specifications:
Freq. Response 1 (-3 dB): 118 Hz - 16 kHz
Freq. Range 1 (-10 dB): 58 Hz - 19 kHz
Rec. Hipass Frequency: 65 Hz
Axial Sensitivity: 98 dB (1W/1m)
Max. Calculated SPL: 131 dB
Horizontal Coverage: 90° (or 60°)
Vertical Coverage: 60° (or 90°)
Power Handling: 500W Continuous, 2000W Peak
LF Transducer: SMX2121, 12 in (305mm) Driver
HF Transducer: ND2B, 2 in (51mm) Diaphragm
Compression Driver
Crossover Frequency: 1450 Hz
Nominal Impedance: 8 Ohms
Minimum Impedance: 6.0 Ohms
Connectors: (2) 4 Contact 10 AWG Phoenix/
EuroBlock Style Screw Terminal,
Gland Nut with Input Panel Cover
Included for Weatherizing
Enclosure Material: 13 Ply Weather Resistant Birch,
Fiberglass Finish
Grille: 18 GA Stainless Steel with Hydrophobic Cloth and Rotatable Logo
Suspension: (22) M10 Threaded Points
Dimensions (H x W x D): 30.26” x 16.00” x 16.27”
(768.6mm x 406.3mm x 413.3mm)
Net Weight: 63.1 lb (28.6 kg)
Shipping Weight: 73.4 lb (33.3 kg)
1 Half Space Measurement.
EVF-1122S/96-FG Loudspeaker System
Frequency Response &
Impedance:
110 316
Horizontal Off Axis Frequency
Response:
110
100
90
100
80
70
20 50 100 1000
Frequency (Hz)
10
Passive Mode, Half Space
Impedance
10000
3.16
20000
Vertical Off Axis Frequency
Response (Up):
110
100
90
80
70
20 50 100
Beamwidth:
360
1000
Frequency (Hz)
On Axis
20° Vertical Up
10° Vertical Up
30° Vertical Up
10000 20000
Horizontal
Vertical
100
50
20
100
90
80
70
20 50 100 1000
Frequency (Hz)
On Axis
20° Horizontal
40° Horizontal
10° Horizontal
30° Horizontal
50° Horizontal
10000 20000
Vertical Off Axis Frequency
Response (Down):
110
100
90
80
70
20 50 100
Directivity:
30
On Axis
20° Vertical Down
1000
Frequency (Hz)
10° Vertical Down
30° Vertical Down
10000 20000
1000
20
10
100
10
3.6
20 100 1000
Frequency (Hz)
Block Diagram (Biamp):
10000 20000
0
20 100 1000
Frequency (Hz)
Block Diagram (Passive):
10000
Polar Plots (1/3 Octave):
400 Hz 500 Hz
Engineering Data Sheet
630 Hz 800 Hz
1 KHz 1.25 KHz 1.6 KHz 2 KHz
2.5 KHz 3.15 KHz
6.3 KHz 8 KHz
16 KHz 20 KHz
4 KHz 5 KHz
10 KHz 12.5 KHz
Horizontal = Black
Vertical = Grey
Dimension Drawings:
End View Front View
EVF-1122S/96 Product Descriptions
• EVF-1122S/96-BLK, 90° x 60°, Black Finish
• EVF-1122S/96-WHT, 90° x 60°, White Finish
• EVF-1122S/96-PIB, 90° x 60°, Black Finish, Weather Resistant
• EVF-1122S/96-PIW, 90° x 60°, White Finish, Weather Resistant
• EVF-1122S/96-FGB, 90° x 60°, Black Finish, Weather Resistant
Fiberglass
• EVF-1122S/96-FGW, 90° x 60°, White Finish, Weather Resistant
Fiberglass
Side View Rear View
CAUTION
This EVF Loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified in the EVF/EVH Users Manual and possible manual update notices. This system should be suspended with certified rigging hardware by an authorized rigging professional and in compliance with local, state, and federal overhead suspension ordinances.
Performance Match
• EVF-1122S/64, 60° x 40° Coverage
• EVF-1122S/66, 60° x 60° Coverage
• EVF-1122S/94, 90° x 40° Coverage
• EVF-1122S/99, 90° x 90° Coverage
• EVF-1122S/126, 120° x 60° Coverage
• EVF-1152S/43, 40° x 30° Coverage
• EVF-1152S/64, 60° x 40° Coverage
• EVF-1152S/66, 60° x 60° Coverage
• EVF-1152S/94, 90° x 40° Coverage
• EVF-1152S/96, 90° x 60° Coverage
• EVF-1152S/99, 90° x 90° Coverage
• EVF-1121S, 12” Bass Element
• EVF-1151S, 15” Bass Element
• EVF-1181S, 18” Bass Element
• CPS2.9, 120V Power Amplifier, 2 x 900W
• CPS2.12, 120V Power Amplifier, 2 x 1200W
• CPS4.5, 120V Power Amplifier, 4 x 500W
• CPS4.10, 120V Power Amplifier, 4 x 1000W
Accessories
• CDNL4, Cover Plate, Dual NL4
• CSG, Cover Plate, Single Gland Nut
• CDG, Cover Plate, Dual Gland Nut
• TK-150, 70V Transformer, 150W
• HRK-1B, Horiz. Rigging Kit, EVF, Black
• HRK-1W, Horiz. Rigging Kit, EVF, White
• HRK-2B, Horiz. Rigging Kit, EVF-SUB, Black
• HRK-2W, Horiz. Rigging Kit, EVF-SUB, White
• VRK-1B, Vert. Rigging Kit, EVF, Black
• VRK-1W, Vert. Rigging Kit, EVF, White
• VRK-2B, Vert. Rigging Kit, EVF-SUB, Black
• VRK-2W, Vert. Rigging Kit, EVF-SUB, White
• EVF-UB-BLK, U-Bracket Kit, EVF, Black
• EVF-UB-WHT, U-Bracket Kit, EVF, White
Electro-Voice
®
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043 www.electrovoice.com
© Bosch Communications Systems
Part Number F.01U.196.173 Rev 04
05/2011
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other Internatonal locations. For customer orders, Contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
