the

Smart Grinder

™

Pro

BCG820

EN QUICK GUIDE

CONTENTS

IMPORTANT

SAFEGUARDS

READ ALL INSTRUCTIONS

BEFORE USE AND SAVE

FOR FUTURE REFERENCE

• A downloadable version of this document is also available at sageappliances.com

2

2 Sage ® Recommend Safety First

5 Getting To Know Your New Appliance

6 Operating Your New Appliance

11 Care, Cleaning & Storage

12 Troubleshooting

13 Guarantee

SAGE

®

RECOMMENDS

SAFETY FIRST

At Sage

®

we are very safety conscious. We design and manufacture appliances with your safety foremost in mind.

In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.

• Before using the first time ensure your electricity supply is the same as shown on the label on the underside of the appliance.

• Remove and safely discard any packaging materials before first use.

• To eliminate a choking hazard for young children, safely discard the protective cover fitted to the power plug.

• This appliance is for household use only. Do not use the appliance for anything other than its intended use. Do not use in moving vehicles or boats.

Do not use outdoors. Misuse may cause injury.

• Fully unwind the power cord before operating.

• Position the appliance on a stable, heat resistant, level, dry surface away from the edge and do not operate on or near a heat source such as a hot plate, oven or gas hob.

• Do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become knotted.

• Do not leave the appliance unattended when in use.

• Always ensure the appliance is turned OFF, unplugged at the power outlet and has been

WE RECOMMEND SAFETY FIRST allowed to cool before cleaning, attempting to move or storing.

• Always turn the appliance to the OFF position, switch off at the power outlet and unplug at the power outlet when the appliance is not in use.

• Do not use the appliance if the power cord, plug, or appliance becomes damaged in any way.

If damaged and maintenance other than cleaning is required please contact Sage

Customer Service or go to sageappliances.com

• Any maintenance other than cleaning should be performed by an authorised Sage ® service centre.

• Children should not play with the appliance.

• Cleaning of the appliance should not be carried out by children unless they are 8 years or older and supervised.

• The appliance and its cord should be kept out of reach of children aged 8 years and younger.

• The installation of a residual current safety switch is recommended to provide additional safety when using all electrical appliances.

Safety switches with a rated operating current not more than 30mA are recommended.

Consult an electrician for professional advice.

• Do not use attachments other than those provided with the appliances.

• Do not attempt to operate the appliance by any method other than those described in this booklet.

• Do not move the appliance whilst in operation.

• Do not touch hot surfaces.

Allow the appliance to cool down before moving or cleaning any parts.

• This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.

• This appliance can be used by persons with reduced physical, sensory or mental capabilities or a lack of experience and knowledge, only if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

• Do not operate the grinder without the hopper lid in position. Keep fingers, hands, hair, clothing and utensils away from the hopper during operation.

3

EN

WE RECOMMEND SAFETY FIRST

The symbol shown indicates that this appliance should not be disposed of in normal household waste.

It should be taken to a local authority waste collection centre designated for this purpose or to a dealer providing this service.

For more information, please contact your local council office.

To protect against electric shock, do not immerse the power plug, cord or appliance in water or any liquid.

4

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

GETTING TO KNOW YOUR NEW APPLIANCE

A. Bean Hopper Lid

B. Bean Hopper

C. Hardened Stainless Steel Conical Burrs

D. Backlit LCD Screen

E. GRIND AMOUNT / PROGRAM Dial

F. SHOTS / CUPS Button

G. Grind Outlet

H. Grind Tray

I. Grind Size Dial

J. START / PAUSE / CANCEL Button

K. Portafilter Activation Switch

A

B

ACCESSORIES

L. Portafilter Cradle 50–54mm

M. Portafilter Cradle 58mm

N. Conical Burr Cleaning Brush

O. Grinds Container

Oi - Container Cap

Oii - Container Lid

C

Oii

Oi

D

E

F

G

H

O

N

Rating Information

220–240V ~ 50-60Hz 165W

M

I

J

K

L

5

EN

OPERATING YOUR NEW APPLIANCE

BEFORE FIRST USE

Remove and safely discard all promotional labels and packing materials attached to your Sage ® product.

Wash hopper, cradles, grind container, container lid and cleaning brush in warm soapy water and dry thoroughly. Wipe exterior of grinder with a soft damp cloth and dry thoroughly. Place grinder on fl at level surface and plug power cord into

220–240V outlet and switch Power ‘ON’.

ENERGY SAVING FEATURE

The grinder will automatically switch off if not used after 5 minutes.

ASSEMBLING YOUR SAGE SMART

GRINDER ™ PRO

Bean Hopper

Align tabs on the base of the bean hopper and insert hopper into position. Turn the bean hopper dial 90° to lock into position.

Fill with fresh coff ee beans and secure lid on top of bean hopper.

GRINDING FOR ESPRESSO

COFFEE

Use single wall fi lter baskets when grinding fresh coff ee beans. Use the fi ner 1–30 settings in the

ESPRESSO range.

STEP 1:

Insert the appropriate portafi lter cradle size. Insert your portafi lter into the cradle.

CRADLES

50-54mm

58mm

PUSH

NOTE

Maximum number of shots with the cradle inserted is 2.

COFFEE CHART

BREW METHOD

GRIND SETTING

GRIND SIZE

AMOUNT

ESPRESSO

FINE

1-30

1 UP TO 8 SHOTS

PERCOLATOR

MEDIUM

31-45

1 UP TO 12 CUPS

DRIP FILTER

MEDIUM COARSE

46-54

1 UP TO 12 CUPS

PLUNGER

COARSE

55-60

1 UP TO 12 CUPS

6

OPERATING YOUR NEW APPLIANCE

STEP 2:

Selecting your SHOTS / CUPS

Select the desired amount of ground coff ee required by pressing the SHOTS / CUPS button.

NOTE

If the Grind Size Dial is tight, run the grinder by pressing the START / PAUSE / CANCEL button while turning the Grind Size Dial. This will release coff ee grounds caught between the burrs.

GRIND AMOUNT SHOTS CUPS START PAUSE

PROGRAM CANCEL

GRINDING INTO GRINDS

CONTAINER OR COFFEE FILTER

STEP 1:

Remove cradle by sliding out from under the grind outlet.

Rotate the Grind Amount Dial to adjust the grinding time to achieve the correct amount of coff ee.

PULL

GRIND AMOUNT SHOTS CUPS START PAUSE

Slide in grinds container with cap open or coff ee fi lter directly under grind outlet.

PROGRAM CANCEL

EN

STEP 3:

Select your grind size

For espresso, we recommend selecting Grind Size setting 12 as a starting point and moving the Grind

Size dial Coarser or Finer to adjust the fl ow of espresso as required.

GRIND AMOUNT SHOTS CUPS START PAUSE

PROGRAM CANCEL

7

OPERATING YOUR NEW APPLIANCE

• Select the required amount of ground coff ee by pressing the SHOTS / CUPS button.

• Press the START / PAUSE / CANCEL button to start grinding operation.

SHOTS CUPS START PAUSE

CANCEL

SHOTS CUPS START PAUSE

NOTE

Programming a custom grind amount/time only sets it for that particular brew method.

This will not change the other Shots or

Cups settings.

Pause Function

You can pause the grinder during operation allowing you to collapse or settle the coff ee in the portafi lter.

• Press and release the

START / PAUSE / CANCEL button to start the grinding operation.

• During grinding, press the

START / PAUSE / CANCEL button again to pause the operation for 10 seconds.

• Press again within this time to resume grinding the remaining dose.

CANCEL

FEATURES OF YOUR SAGE

SMART GRINDER™ PRO

Automatic Grinding

Grinding automatically allows you to grind hands-free.

• Press and release either the

START / PAUSE / CANCEL button or push the handle of your portafi lter once. This will activate the PORTAFILTER SWITCH.

• Grinding will automatically stop when the preset amount is dispensed.

GRIND AMOUNT SHOTS CUPS START PAUSE

PROGRAM CANCEL

8

PUSH

OR

START PAUSE PORTAFILTER SWITCH

PRESS & RELEASE

OPERATING YOUR NEW APPLIANCE

Program Function

Once you have set your required dose, you can program this time into the number of shot(s) currently displayed on the LCD.

Press and hold the PROGRAM button, grinder will beep twice to confi rm. Only the shot displayed will be programmed, all other shots will remain unchanged.

ADJUSTING YOUR GRIND AMOUNT

Increasing the Grind Amount

To increase the grind amount selected, turn the

GRIND AMOUNT dial to the right.

EN

GRIND AMOUNT SHOTS CUPS START PAUSE

GRIND AMOUNT SHOTS CUPS START PAUSE PROGRAM CANCEL

PROGRAM

PRESS & HOLD

CANCEL

Manual Grinding

Grinding manually allows you to have complete control over how much coff ee is dispensed.

• Press and hold either the START / PAUSE /

CANCEL button or push the handle of your portafi lter to activate the PORTAFILTER

SWITCH for as long as you require.

• Release START / PAUSE / CANCEL button or

PORTAFILTER SWITCH and grinding will stop.

Decreasing the Grind Amount

To decrease grind amount selected, turn the

Grind Amount Dial to the left.

PUSH

OR

START PAUSE PORTAFILTER SWITCH

PRESS, HOLD & RELEASE

NOTE

To RESET the grind amount/time to the default settings, press and hold the SHOTS / CUPS button until a long beep sounds.

9

OPERATING YOUR NEW APPLIANCE

ADJUSTING CONICAL BURRS

Some types of coff ee may require a wider grind range to achieve an ideal extraction or brew.

A feature of your Smart Grinder™ Pro is the ability to extend this range with an adjustable upper burr.

We recommend making only one adjustment at a time.

1 2 3 4 5 6

Unlock hopper

AIR TIGHT

CONTAINER

Hold hopper over container & turn dial to release beans into container

Align hopper into position

Run grinder until empty

Remove hopper Remove upper burr

77

E

E

FIN

88 9

FINE COARSE

4

FINE COARSE

5

6 7

8

10

E

FIN

E

11 12 13

Remove wire handle from both sides of the burr

Move adjustable top burr, 1 number, coarser or finer

Align the number with the handle opening

Insert wire handle from both sides of the burr

Push upper burr firmly into position

Lock upper burr Align hopper into position

14 15

Lock hopper Check your extraction

10

CARE, CLEANING & STORAGE

CARE, CLEANING & STORAGE

1.

2.

3.

4.

Empty beans from the hopper and grind out any excess beans

(see below).

Unplug power cord from power outlet before cleaning.

Wash the grind container and lid, bean hopper and lid in warm soapy water, rinse and dry thoroughly.

Wipe and polish exterior of appliance with a soft damp cloth.

NOTE

Do not use alkaline or abrasive cleaning agents, steel wool or scouring pads, as these can damage the surface.

NOTE

Please do not clean any grinder parts or accessories in the dishwasher.

EN

CLEANING CONICAL BURRS

Regular cleaning helps the burrs achieve consistent grinding results which is especially important when grinding for espresso coff ee.

1 2 3 4 5 6

Unlock hopper

AIR TIGHT

CONTAINER

Hold hopper over container & turn dial to release beans into container

Align hopper into position

Run grinder until empty

77 88 9 10 11

Remove hopper Remove upper burr

12 13

Clean upper burr with cleaning brush

Clean lower burr with cleaning brush

Clean grind outlet with brush

Push upper burr firmly into position

Lock upper burr Align hopper into position

Lock hopper

11

12

TROUBLESHOOTING

PROBLEM

Grinder does not start after pressing START /

PAUSE / CANCEL button

Motor starts but no ground coffee coming from grind outlet

Motor starts but operates with a loud ‘racket’ noise

Unable to lock bean hopper into position

Not enough/ too much coffee grind

Portafilter overfills

Emergency stop?

POSSIBLE CAUSE

• Grinder not plugged in.

• Grinder has overheated.

• Bean hopper not attached correctly. ‘PLEASE LOCK

HOPPER’ will be displayed on LCD screen.

• Incorrect button pressed.

• No coffee beans in bean hopper.

• Grinder/bean hopper is blocked.

• Grinder is blocked with foreign item or chute is blocked.

• Moisture clogging grinder.

• Coffee beans obstructing bean hopper locking device.

• Grind amount requires adjustment.

WHAT TO DO

• Plug power cord into power outlet.

• Remove power plug from power outlet.

Leave for 20 minutes to cool down before using again.

• Lock bean hopper into position.

• Press START / PAUSE / CANCEL or PORTAFILTER SWITCH to activate.

• Fill bean hopper with fresh coffee beans.

• Remove bean hopper. Inspect bean hopper and burrs for blockage.

Replace parts and try again.

• Remove bean hopper, inspect burrs and remove any foreign body.

• Clean burrs and chute (refer to Care

& Cleaning on page 11).

• Leave burrs to dry thoroughly before re-assembling. You can use a hair dryer to blow air into grinder inlet (lower burr) to dry.

• Remove bean hopper. Clear coffee beans from top of burrs. Re-lock hopper into position & try again.

• Press SHOTS / CUPS button to change grind amount.

• Use Grind Amount Dial to fine tune the amount ‘more’ or ‘less’.

• It is normal for the correct amount of coffee to appear overfilled in your portafilter. Untamped coffee has approximately three times the volume of tamped coffee.

• Press START / PAUSE / CANCEL button to stop operation.

• Unplug power cord from power outlet.

GUARANTEE

2 YEAR LIMITED GUARANTEE

Sage Appliances guarantees this product for domestic use in specified territories for 2 years from the date of purchase against defects caused by faulty workmanship and materials. During this guarantee period Sage Appliances will repair, replace, or refund any defective product

(at the sole discretion of Sage Appliances).

All legal warranty rights under applicable national legislation will be respected and will not be impaired by our guarantee. For full terms and conditions on the guarantee, as well as instructions on how to make a claim, please visit www.sageappliances.com.

EN

13

GBR IRE

BRG Appliances Limited

Unit 3.2, Power Road Studios, 114 Power Road, London, W4 5PY

Freephone (UK Landline): +44 (0)808 178 1650

Mobile Calls (National Rate): 0333 0142 970 www.sageappliances.com

Registered in England & Wales No. 8223512.

• Due to continued product improvement, the products illustrated or photographed in this document may vary slightly from the actual product.

Copyright BRG Appliances 2019.

SCG820 UG1 D19