Wahl 9888-802 Total Beard Rechargeable Trimmer Instructions

Add to my manuals
16 Pages

advertisement

Wahl 9888-802 Total Beard Rechargeable Trimmer Instructions | Manualzz
Lithium Ion Trimmer
Lithium Ion Trimmer
Instructions
1
Lithium Ion Trimmer
Please read all instructions carefully to familiarise yourself
with your new Wahl trimmer before using.
Save these instructions for further reference.
For any further assistance or information call Customer Services on
T: 01227 740066
or visit
W: www.wahl.co.uk
E: [email protected]
CONTENTS
IMPORTANT SAFEGUARDS
Page 3
OPERATING INSTRUCTIONS
Page 5
CLEANING AND STORAGE
Page 6
TROUBLE SHOOTING
Page 6
CARING FOR YOUR TRIMMER
Page 6
BLADE CAREPage 6
SPECIAL FEATURES
Page 7
WIRINGPage 13
BATTERY REPLACEMENT, REMOVAL
AND DISPOSALPage 13
GUARANTEEPage 14
2
Lithium Ion Trimmer
Please retain this leaflet for future reference.
READ ALL INSTRUCTIONS BEFORE USING.
IMPORTANT SAFEGUARDS
When using your electrical appliance, basic safety
precautions should always be followed, including the
following:
1. This appliance can be used by children
from aged 14 years and above and
persons with reduced physical, sensory or
mental capabilities, or lack of experience
and knowledge, if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved. Children
shall not play with the appliance. Cleaning
and user maintenance shall not be made
by children without supervision.
2. Switch off the appliance and unplug from
outlet when not in use, before putting
on or taking off attachments and also
before cleaning the appliance.
3. Never use your appliance without paying
attention. Except when charging always
unplug this appliance from the electricity
3
Lithium Ion Trimmer
outlet immediately after using.
4. Do not operate the appliance with a
broken cord, plug or charger, or if the
appliance malfunctions, or is dropped
or damaged in anyway.
5. Do not wrap the cord around the
appliance.
6. Any servicing or repair must be performed
by an authorised service representative.
7. Do not use outdoors or in damp areas.
8. The use of attachments that are not
supplied by the manufacturer may cause
fire, electric shock or injury and damage to
the appliance.
9. To protect against risk of electrical shock,
never immerse the unit or let it come into
contact with water or any other liquids.
Do not use the unit with wet hands. If
the appliance should become wet, damp
or fall in water, remove plug from mains
socket immediately. Do not put your hands
in the water. Do not take into bathroom.
10. Never carry the unit by its power cord.
11. Do not drop or insert any object into any
opening.
12. Use this appliance only for its intended
purpose.
4
Lithium Ion Trimmer
13. Exhausted batteries/rechargeable
batteries should not be disposed of in the
household waste. Dispose of them in a
completely discharged state in accordance
with local legal regulations. Do not throw
into fire where heat could cause them to
rupture.
Danger of explosion
►►Never use the appliance where aerosol (spray)
products are being used or where oxygen is
released.
WARNING: KEEP THE APPLIANCE DRY
OPERATING INSTRUCTIONS
RECHARGING
1. This trimmer is conveniently designed for household use. It should be allowed to
charge 1 hour before first use.
2. Remove the trimmer, recharging transformer and accessories from the packing
material.
3. Connect the transformer to the trimmer. BE SURE TRIMMER IS IN THE “OFF 0” POSITION WHEN CHARGING.
4. Plug the recharging transformer into any convenient electrical outlet at the correct
voltage.
5. When trimmer is low in power, it should be connected to the transformer and
plugged into an outlet to assure maximum power is available when it is next
used. This transformer is designed to completely charge the battery without
overcharging. Do not use the trimmer while it is charging.
6. The battery will take approximately 60 minutes to charge. The Lithium Ion
Trimmer also has quick charge capability.
7. Insert only recharging transformer plug supplied by the manufacturer into
charger receptacle.
5
Lithium Ion Trimmer
TROUBLESHOOTING
If your Trimmer does not seem to take a charge, check the following before returning
it for repair:
1.
Check outlet to make sure it is working by plugging in another appliance.
2.
Make sure the outlet simply is not connected to a light switch which turns the
power at the outlet off when lights are turned off.
3.
Be sure the trimmer is properly connected to the recharging transformer, all
connections are secure and the switch on the trimmer is turned “OFF - 0.”
4.
If your electricity is connected to a master power switch, we suggest the
trimmer be disconnected from the charger anytime the master switch is off.
Leaving the unit plugged into a dead outlet or an unplugged charger will drain
the battery.
5.
If trimmer does not run and it is completely charged, turn the unit “ON - I”
and pinch or push the blades manually. (Oil may have dried out between the
blades, so they may be temporarily stuck together.)
CARING FOR YOUR TRIMMER
OILING BLADES
For best results, put one or two drops of Wahl Clipper Oil on
the blades only when necessary, or approximately once a month. Motor
bearings are permanently lubricated—do not attempt to oil.
When oiling your trimmer, turn the trimmer “ON - I,” hold the unit with
the blades facing DOWN and squeeze one or two drops of oil onto the
blades. Wipe off excess oil with soft cloth.
NOTICE—DO NOT OVER OIL!
Excessive oiling or application of liquids will cause damage if allowed to
seep back into motor.
BLADE CARE
Trimmer blades have precision-hardened, ground and lapped cutting
teeth. Blades should be handled carefully and never bumped or used to
cut dirty or abrasive material. Never rinse the blades with water, or the
blades may rust. Clean with the included brush.
CLEANING/STORAGE
Before storing your trimmer, use the cleaning brush to whisk any loose
hairs from the unit and the blades. For units with a soft-touch grip, use a
6
Lithium Ion Trimmer
damp cloth to wipe down the body of the trimmer, taking care not to get
the blades wet. Store unit in such a manner so that blades are protected
from damage.
When the trimmer is not in use, the trimmer guide/blade guard
attachment should be in place to protect the blades.
This appliance should be stored in a manner where it is not subjected to
Crushing, Heating above 100°C (212°F), or Incineration.
SPECIAL FEATURES:
9854
9888
9860 9876
Your trimmer has been designed with several
advanced features to help you get perfect
results every time you trim. Your trimmer
may be used to neatly trim goatees, beards,
mustaches, neckline, sideburns around the
ears and eyebrows, or anywhere you may need
grooming. It also makes a great all-around
family trimmer for mini haircuts and touch ups
between trips to the barber or to clean up the
shape of the neck.
►► Soft-Touch Grip (9854, 9860, 9888) allows
you to hold the trimmer in a comfortable position for precision trimming.
►► An Ergonomic Shape and Gripping Horizontal Bars (9876) for added
comfort, designed so you always hold the trimmer in a comfortable position
for precision trimming. The shape also provides optimum trimming visibility.
►► A Rotating Head (9876). The trimming head rotates 360
degrees, providing two trimming positions. This allows
you to achieve the optimum ergonomic relationship
between the hand, the trimmer and the face. Rotate the
head to the desired position as follows. With the switch in
the “OFF - 0” position, depress the lock button and rotate
the head clockwise or counterclockwise 360 degrees.
►► A 6-Position Trimming Guide makes achieving a
consistent trim easy every time.
The guide can be removed (providing a seventh cutting
position) and reattached without changing the preset
cutting length, so once you have found the perfect
length, there’s no guesswork in achieving it every trim.
The trimming guide is a two-piece assembly, consisting
7
Lithium Ion Trimmer
of a base and a comb. It should not be disassembled.
To attach the guide, simply slide it on at a slight angle
and press the release tab down to secure in position.
To remove the guide, gently push up on the release tab
and slide the assembly away from the trimmer. Adjust
the trimming length by pressing on the thumb lever and
moving the comb forward or backward to the desired
setting.
►► A Detachable blade system enables you to quickly
change from a standard-width blade for full grooming to a
narrow-width blade for detail trimming around
a mustache, goatee, or anywhere to define
the hair line and clip any stray whiskers.
To remove attachment, simply pull top edge
of blade away from body unit. To attach, align back tab of attachment head to
cavity on the inner edge of trimmer unit and push down on top of blade.
Should blades become damaged or dull or if you want additional attachment
heads for your trimmer, you may purchase them from Wahl. Be sure to ask
for the following attachment with part number from our service and repair
department (see last page for contact information):
Trimmer
Detailer
T-Blade
Dual
Shaver
Rotary
Nose
Trimmer
Detail
Shaver
#59300- #59301 #59302 #59303 #59306 (9854L,9860L) #59307
800
#58067 (9876L,9888L)
The trimmer you purchased may not have all of these heads, but they will all work with
your trimmer if you wish to purchase them. You may order additional heads.
►► Self-sharpening blades are high compression, high-carbon steel, made to
maintain their shape and sharpness for extended periods.
TRIMMING AND EDGING YOUR BEARD
The following are suggested trimming steps and trimmer positions. You may find
different procedures work better for you.
1.
Comb your beard in the direction that it grows to help reveal stray hairs that
8
Lithium Ion Trimmer
2.
3.
4.
5.
6.
may be longer than the others.
Attach the 6-position trimming guide to trim and
taper your beard. Begin with the guide set at a long
trimming length. Trim toward your chin in smooth,
overlapping strokes, following the lay of your beard.
If you trim against the way your beard naturally lays,
the trimmer will cut the hair much shorter than the
marked length.
Adjust the trimming guide to progressively shorter
settings until you reach the desired length of beard. #1 Stubble Length (2 mm)
(4 mm)
You may wish to set the trimming guide attachment #2 Short
#3 Medium Short (6 mm)
to cut closer near the ear and down under the chin, #4 Medium
(8 mm)
changing to a longer setting toward the front of the #5 Medium Long (10 mm)
#6 Long
(12 mm)
face and point of your chin. When the trimming
guide is removed, it will remain at its last length
setting until you change it.
Always be sure the trimming guide is locked solidly into the desired position
before you start to trim.
To cut the outline of your beard, remove the
trimming guide. Starting under your chin and
working back toward your jawbone and ears, cut
the outer perimeter of your beard underneath the
jawbone. Continue the line all the way up to the
ears and hairline.
Accentuate your beard line by using the trimmer in
a downward motion. Start at the line you’ve created
and, working from the chin back toward the ears, trim the area right under
your beard line.
Define the upper part of your beard using the same technique.
For a neater finished
look, replace
attachment blade
to the detail blade
forward. Use this
blade for fine, detail
trimming anywhere it is
needed, such as at the
sideburns near the ears, goatees, etc.
9
Lithium Ion Trimmer
DETAILING NECKLINES, SIDEBURNS, MUSTACHES
& BEARDS using trimmer head.
Slowly move trimmer downward on desired areas to neatly trim and shape.
TRIMMING ARM & LEG HAIR using trimmer head.
Simply glide the trimmer over your arm or leg until desired hair length is
achieved. The first time you trim the hair, start by using a longer setting on the
guide comb on the trimmer, then use progressively shorter settings if a shorter
length is preferred.
TRIMMING CHEST & STOMACH using trimmer head.
Glide the trimmer over your torso region, in an upward motion until desired hair
length is achieved. For tight, scratch-free trimming, use the #1 guide comb.
FOR THE CLOSEST LOOK. After trimming, attach the shaver head.
The shaver makes for the perfect tool to groom the total body. Using the same
technique, as mentioned prior, you can groom
wherever you feel a need. Shave against hair growth
while stretching the skin. After every use, remove the
shaver foil by pressing both side buttons and carefully
using cleaning brush provided.
10
Lithium Ion Trimmer
TRIMMING PRIVATE AREAS with the trimmer &
detailer head.
1. Volume reduction using trimmer head. Attach guide comb and select a long
trimming length. Begin trimming, starting at the top and working down. Use
progressively closer settings to get the “look” and length you prefer.
2. For hard to reach or tight areas, use the detailer head. Always pull skin taut.
Then slowly move the detailer through area to trim until desired look is
accomplished.
3. Shave in your private areas by gently shaving in the desired area and always
keep the skin taut.
Trimming Nose Hair using detailer head.
Make sure the nasal passages are clean. Slowly move the detailer in and out of
each nostril, no more than 1/4-inch deep.
Trimming EAR Hair using detailer head.
Make sure the outer areas of the ears do not contain any wax. Hold the ear flat
with one hand and carefully insert detailer no more than 1/4-inch into the outer
ear.
CAUTION: Do not insert the detailer or any other foreign object into the inner
ear. For hair growing on the outside of the ear, simply move the detailer slowly
along the edges of the ear.
Trimming Eyebrows using detailer head.
Slowly move detailer to neatly trim stray hairs. For precise, even trimming,
slowly move the detailer closer or farther away from eyebrows to achieve
desired length. Do not press against brow as it may remove too much hair.
FADE CUT using a T-Blade
Start at the temple and cut all the way around the head to establish the ultimate
location of the fade line. Always cut against the grain for the shortest cut. Don’t
force the blade through the hair. Let the trimmer do the work.
1. Next, cut around the head again and up the nape of the neck to the fade line,
brushing away the cut hair as you go. Pull the scalp taut with the thumb
for the closest cut. Turn the trimmer upside down when necessary to keep
cutting against the grain. Make sure both sides of the head are even.
11
Lithium Ion Trimmer
2. For the top of the head, cut with the grain using the individual guide comb
attachments. The smaller the number of the comb, the shorter the cut. Comb
or brush the hair as you cut for an even end result.
3. To complete the fade, blend the hair at the fade line by trimming up and out
across the line and against the grain all the way around the head. Then,
repeat all around, turning the trimmer upside down and cutting downward.
The final objective is to blend the hair so there is no real line, just a perfect
fade from bald to very short hair. You can achieve this by using the #1
individual guide comb attachment. Continue combing and cutting until you
achieve the desired effect.
4. To create a part, pick a spot off-center. Pull the scalp tight and with the
end of the blade perpendicular to the head, move the trimmer back and forth
to cut a line. Comb through it and cut again to make sure the cut is precise.
TRIMMING WITH ATTACHMENT COMBS
Your Trimmer includes three trimming attachments; stubble, medium and long.
The stubble guide has 1 bar, the medium-cut attachment
has two bars and the long-cut attachment has three bars.
These attachments are ideal for blending, tapering and
defining beards, as well as for achieving a “close trim”
stubble look around the face. To use the attachments, go
with the hair direction.
To achieve closer looks, go against the hair direction.
1
12
2
3
Lithium Ion Trimmer
WIRING
WARNING: IF THE TRANSFORMER IS DAMAGED IT MUST BE
REPLACED IN ORDER TO AVOID A HAZARD. THIS PRODUCT MUST
ONLY BE USED WITH THE TRANSFORMER SUPPLIED. SHOULD
A REPLACEMENT BE REQUIRED CONTACT WAHL CUSTOMER
SERVICES.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT DIRECTIVE
2002/96/EC (WEEE)
At the end of this products life it should not be disposed of
with general household waste.
Care should be taken to dispose of in a suitable manner in
accordance with your Local Authority regulation.
Battery Replacement, Removal and Disposal
Lithium-Ion Battery Replacement
For battery replacement the entire, intact clipper or trimmer should be
sent to: Wahl (UK) Ltd Customer Services (the address can be found on
the reverse of this booklet) or taken to a suitably qualified professional.
The battery should only be replaced by the original manufacturers spare,
for safety reasons a substitute should not be used.
Do not attempt to remove the battery. Lithium-Ion batteries can explode,
catch fire, and/or cause burns if disassembled, damaged or exposed to
water or high temperatures.
Lithium Battery Disposal
Do not dispose of this product or the Lithium battery in the normal
household waste.
The product should be returned to Wahl Customer Services where we
offer a take back service or taken to a local collection facility where they
will be dealt with safely and sent for the appropriate recycling.
13
Lithium Ion Trimmer
GUARANTEE
This product is guaranteed against defects in material and workmanship
for a period of 5 years from the date of original purchase or receipt as a
gift.
Should this product become defective during the guarantee period,
return it to the store of purchase together with your proof of purchase for
repair or replacement.
Alternatively within the guarantee period you can return the product
to Wahl (UK) Ltd who will repair any such defect or elect to replace
the product or any part of it, without charge, provided there is proof
of purchase. Should a replacement be offered this will not extend the
original guarantee period.
The guarantee becomes invalid in the case of misuse, alteration or
repair by unauthorised persons.
This guarantee does not include blades, cables, shaver heads, foils and
cutters etc., which are consumable parts.
This product is designed for domestic use only and use within a
professional environment will invalidate the guarantee.
This guarantee in no way affects your rights under law in the United
Kingdom.
14
Lithium Ion Trimmer
15
Lithium Ion Trimmer
WAHL (UK) LTD
STERLING HOUSE
CLIPPER CLOSE
RAMSGATE, KENT
CT12 5GG
CUSTOMER SERVICES T: 01227 740066
www.wahl.co.uk
Form No. ZB640
Rev1 09-18
16

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement