- Vehicles & accessories
- Motor vehicle electronics
- Car navigation systems
- Honda
- Civic Type R
- Owner's manual
Honda Civic Type R 2017 Owner Manual 147 Pages
advertisement
2017
Civic Hatch
NAVIGATION MANUAL
The information and specifications included in this publication were in effect at the time of approval for printing. Honda Motor Co., Ltd., reserves the right, however, to discontinue or change specifications or design at any time without notice and without incurring any obligation.
Accessories Precautions
The GPS antenna is located in the dashboard. Metallic front or side window tinting can seriously degrade or obstruct GPS reception.
Signal noise from devices such as radar detectors, vehicle tracking devices, remote starters, and additional amplifiers can disrupt the navigation system. If you install any such item, install it away from the navigation display and antenna.
Important Safety Information
3
WARNING
Using the navigation system while driving can take your attention away from the road, causing a crash in which you could be seriously injured or killed.
Only operate system controls when the conditions permit you to safely do so.
Avoid focusing on the screen or manually operating the system controls while driving.
Certain on-screen controls are disabled when driving, however most of the voice commands continue to function. Pull to the side of the road if you need to devote more attention and time to look at the screen or access additional menus.
Route guidance may conflict with street closures, road construction, detours, and out-of-date map data.
The system itself may also have limitations. Verify route information by carefully observing roads, signs, and signals. Always use your own judgment and obey traffic laws.
2
NOTICE
This vehicle’s navigation display, if so equipped, includes mercury-containing components. Upon removal, please reuse, recycle, or dispose of as hazardous waste.
Clean the screen with a soft, damp cloth. You may use a mild cleaner intended for use on navigation screens.
00X31-TGG-8001 2017 Civic Hatch
Navigation Manual - Ver. 2
ANV-0 5679
2
2
2
2
2
2
Driving to Your Destination 77
Contents
2
Quick Reference Guide
Overview—Functions at a Glance
Navigation
You can select any place/landmark as a destination by using the touchscreen. The navigation system gives you turn-by-turn driving directions to your destination.
Store home address
Register
1
home address.
Store contacts
Store locations to use as the destination.
Enter destination
Select your destination using several methods.
Select route
Set route preferences and select one of the available routes.
Track route
Follow your route in real-time with voice guidance.
Traffic Information *
View and avoid congestion and traffic incidents.
*: Available only in certain areas.
Avoid certain areas
Set streets and areas to detour around.
Add waypoints
Add “pit stops” along your route.
HOME Screen
The system displays various functions from the HOME screen. Press the (Home) icon at any time to return to the main HOME screen.
(Display Mode)
Switch between Day and Night modes manually.
Display the map screen.
(Home)
Display the HOME screen.
VOL (Volume)
Increase or decrease the audio volume.
(Menu)
Display the map menu.
(Back)
Go back to the previous screen.
Navigation Top Screen
Display the map screen and operate the navigation features. From the HOME screen, select navigation top screen is displayed.
GPS signal strength
Display the satellites’ status.
Where To?
Select search methods to enter a destination for route guidance.
Apps
Display the useful functions incorporated into the navigation system.
Navigation
Display the navigation feature that was used the last time.
At start-up, the navigation top screen is displayed.
and then press the (Back) icon. The
View Map
Display the map screen.
Settings
Change the settings for the navigation functions.
3
Touchscreen Operation
You can operate the system using your finger on the touchscreen.
The touchscreen can be operated if you are wearing thin gloves, but it may be more difficult for the system to respond.
Tap
Touch the screen lightly with your finger to select an option on the screen.
Slide
Move your finger slowly across the screen to scroll the map.
Swipe
Lightly sweep your finger side to side or up and down to scroll a list or map.
Pinch In/Out
Open or close your fingers on the screen in a pinching motion to zoom in or out of the map.
4
You can change the touchscreen sensitivity setting.
2 Refer to the Owners Manual.
How to Enter Information
You can enter information (e.g., city names, street names, numbers, and symbols) when prompted on input screens.
Using Voice Commands
When you see in this manual, voice commands are available for that feature.
The system recognizes only certain commands.
Available navigation voice commands
Press the (Talk) button, and say the letter, number, or symbol
(e.g., say “ 1 ”).
If a voice command is not recognized, a list is displayed with possible options.
Using the Touchscreen
Select a character or icon on the screen to select it.
Select to remove the last entered character.
Select to remove all entered characters.
Select to display upper/lower case characters.
Select to enter a space character.
Select to display other types of characters.
Select change
On list screens:
Say the number of the list item (e.g., say “ Three ” to select item 3).
Say ” to return to the voice command menu screen.
Say ” to return to the previous screen.
Say ” to scroll up one page.
Say ” to scroll down one page.
Say ” to end the voice command function.
On input search screens, the suggested search terms are displayed. Select to display a list of possible entries.
5
6
Map Screen Legend
The color of the map is different depending on the selected Map Theme.
Map scale
Searching specific category
Map operation icons
Traffic incident icons
Streets
Current vehicle position
Feature areas
Landmark icons
Map buttons
Traffic flow indicator
Traffic is flowing normally.
Traffic is slightly congested.
Traffic is heavily congested or stopped.
Traffic has not updated.
Map menu
During Route Guidance
During route guidance, route information is displayed on the map screen.
You can see the detailed information on the turn information screen.
Map Screen
Next guidance indicator
Distance to the next guidance point and street name of next guidance point.
Waypoint
Where To?
Cancel route
Speed limit Calculated route
Dashboards
Guidance Screen
Street name of next guidance point
Scrolls key
Select this key to scroll the display.
Estimated time to next guidance point
Distance to next guidance point
Day or Night Mode
Press the (Display Mode) button to manually switch between Day and
Night modes.
Day Mode Night Mode
Turn-by-Turn Directions
The next guidance point appears on the Driver Information Interface (DII).
Remaining distance
Street name of next guidance point
Next driving maneuver is approaching.
7
8
Navigation—Home Addresses and Going Home
The “Home” feature automatically routes you to your home address from any location simply by selecting Go Home .
You can store one home address.
The order of the steps may change depending on the map data loaded on your system.
Storing Your Home Address Going Home
e Select Search All .
a Select .
b Select .
a Select .
b Select .
c Press the (Menu) icon and then select Set Home Location .
c Select Go Home .
d Select Enter My Address .
f Enter a house number and then select
Done .
g Enter a street and then select Done .
h Select a street from the list.
Alternatively, you can say
“
Navigation
” and then “
Go
Home ” from any screen.
If the select city screen is displayed, select a city.
i Select an address from the list.
j Select Select .
Navigation—Entering a Destination
Enter your destination using one of several methods, then follow route guidance on the map to your destination.
The order of the steps may change depending on the map data loaded on your system.
a Select .
b Select .
c Select Address .
f Enter the name of your destination street and select Done .
i Select Go!
.
Route guidance to the destination begins.
g Select your destination street from the list.
Routes : Choose one of multiple routes.
d Select Search All .
e Enter the house number and select
Done if necessary.
If the select city screen is displayed, select a city.
h Select an address from the list.
: Display your destination map and save a place.
9
10
Navigation—Changing Route or Destination
You can alter your route by adding waypoints to visit, or changing your destination during route guidance.
Adding a Waypoint (“Pit Stop”)
You can add waypoints along your route.
a Select .
b Select .
c Select a search method.
d Select the location to add to the destination list and select Go!
.
e Select Add to Active Route .
f If necessary, edit the order of the destinations and select Done .
Changing Your Destination
There are several methods you can use to specify a new destination during route guidance.
Searching nearby hospitals, police stations, or gas stations
Select the vehicle icon and select an option.
Selecting an icon on the map
Select a place/landmark icon or a new area on the map twice.
Entering a new destination
Select Where to?
and then enter a new destination.
Canceling Your Route
a Select .
Help
This navigation system comes with help information, which tells you how to use this navigation.
a Press the (Home) icon and then select .
b Press the (Back) icon.
c Select Apps .
d Select Help .
e Select a help topic.
Select to search help topics by keyword.
You can also display a help topic to select on each menu screen.
Alternatively, you can say
“ Navigation ” and then “ Stop route ” from any screen.
Voice Control Operation
Voice Portal Screen
a Press and release the (Talk) button.
The system prompts you to say a voice command. Press and release the
(Talk) button again to bypass this prompt.
The audio system is muted during voice control mode.
You can use other voice commands on the Voice Portal screen.
Set Voice Prompt to Off to bypass the voice prompt.
See the Owner's Manual.
Carefully read the usage note for the voice control.
You can use other voice commands on the Voice Command screen for navigation.
The system beeps when ready for a command. Press the (Hang-Up/
Back) button or the cancel.
(Back) icon to b Say .”
The Voice Command screen is displayed.
After that, follow the voice prompt and say a voice command.
Voice Command Screen
a After saying “
Navigation
” from the Voice Portal screen, the below screen appears.
b Listen for the voice prompt, then say a voice command.
You do not need to press the (Talk) button again in the Voice Command screen.
Available voice commands are highlighted on the screen.
11
12
Troubleshooting
Why does the vehicle position icon on the map appear slightly off my actual position, especially at intersections?
This is normal. The navigation system is unaware of the width of intersections. Large differences in vehicle position can indicate a temporary loss of the GPS signal.
Why does the “Arrival time” display sometimes increase even though I am getting closer to my destination?
The “Arrival time” is based on the speed limit on each road. Depending on the traffic conditions, the “Arrival time” may be calculated to be earlier or later.
Why does my clock frequently change the time forward and backward by one hour?
The clock setting is automatically updated based on your
GPS location. If you are driving near a time zone border, the automatic update likely is the reason.
For more Information
How do I turn on the navigation system voice guidance?
1.
Press the (Home) icon.
Select Settings > System > Sound/Beep tab.
Turn up Guidance Volume , if guidance volume is low.
2.
Select and then press the (Back) icon. Select
Settings > Navigation and enable Voice Prompt .
For more details, see the Owner’s Manual.
How do I specify a destination when an entered city or street could not be found?
Try selecting the destination directly from the map.
How to Use This Manual
This section explains different methods on how you can easily find information in this manual.
Searching the Table of Contents
Two types of Tables of Contents help you find your desired information.
More Detailed
Contents
Table of Contents
First, find the general chapter related to what you are looking for (e.g., entering a destination from the Saved Places).
Then, go to that chapter to view a more specific table of contents.
Chapter Contents
This more detailed table of contents shows you exactly what information is listed by section and title.
Searching the Index
Menu items displayed on the navigation screen (e.g., Saved ) can be found individually in the Index.
Navigation Screen
Index
The Index consists of main terms and subentries. The sub-entries help you get to the desired page depending on what you are looking for.
Go to the
Next Page
13
After following the menu tree, step-by-step instructions explain how to achieve the desired result.
Menu Tree
The menu tree helps guide you through the system’s menu options.
To get to your desired function, follow the menu tree in order of the steps shown.
(Home)
Select the item on the system control panel.
14
* Sample pages and images in this section may differ from the actual ones.
Saved
Select the menu option.
Select Saved .
System Setup
This section describes the start-up procedure and the navigation and setup functions.
Start-up ....................................................16
Voice Control System ..............................17
Voice Recognition ...................................17
Personal Information ...............................18
Setting Home Location............................18
Saved Locations ......................................19
Display Mode Settings ............................26
Switching Display Mode Manually ...........26
Map & Vehicle ..........................................28
Vehicle....................................................29
Driving Map View (Map Orientation) .......30
Map Detail ..............................................31
Map Theme ............................................32
Map Buttons ...........................................33
Map Layers ............................................ 34
Dashboards ............................................ 34
myMaps ................................................. 35
Navigation ............................................... 36
Calculation Mode................................... 37
Avoidances ............................................ 38
Custom Avoidances ............................... 39
Traffic ....................................................... 45
Other Settings ......................................... 46
Units ...................................................... 46
Language & Keyboard ............................ 47
Device .................................................... 50
Data Reset ............................................... 52
Reset Factory Default Settings ................ 52
15
16
Start-up
The navigation system starts automatically when you set the power mode to
ACCESSORY or ON. At start-up, the following confirmation screen is displayed.
1.
Select OK .
u The HOME screen is displayed.
u If you do not select OK , the system will automatically select
OK after a certain period of time.
u The system will automatically start up the feature that was used the last time.
2.
Select .
u The map screen is displayed.
u When you want to display the navigation top screen, you press the (Back) icon.
1
Avoid focusing on the screen and drive safely following the actual traffic restrictions.
When you use the navigation system, the system may close other apps.
When you select Navigation , the system displays the navigation feature that was used the last time. At start-up, the navigation top screen is displayed.
■
Limitations for Manual Operation
Certain manual functions are disabled or inoperable while the vehicle is in motion.
You cannot select a grayed-out option until the vehicle is stopped.
Voice commands are still operable while the vehicle is in motion.
Voice Control System
Your vehicle has a voice control system that allows hands-free operation of the navigation system functions.
The voice control system uses the (Talk) and (Hang-Up/Back) buttons on the steering wheel and a microphone near the map lights on the ceiling.
For details of the (Talk) button, (Hang-Up/Back) button and microphone position, see the Owner's Manual.
1
When you press the (Talk) button, the system prompts you to say a voice command. Press and release the (Talk) button again to bypass this prompt and give a command.
Voice Recognition
To achieve optimum voice recognition when using the navigation voice control system:
• Make sure the correct screen is displayed for the voice command that you are using.
• Close the windows and moonroof * .
• Adjust the dashboard and side vents so air does not blow onto the microphone on the ceiling.
• Speak clearly in a clear, natural speaking voice without pausing between words.
• Reduce any background noise if possible. The system may misinterpret your command if more than one person is speaking at the same time.
1
The voice control system can only be used from the driver’s seat because the microphone unit removes noises from the passenger’s side.
* Not available on all models
17
18
Personal Information
Setting Home Location
H u u (Menu)
Use the personal information menu to set your home location.
1.
Select Set Home Location .
1
You can also display the same screen by selecting on the Where To?
screen.
If you want to delete a shortcut(s), select Remove
Shortcut(s) .
2
The home location can be overwritten.
2.
Select an option.
u Select Use Current Location to set home location.
u If selecting Enter My Address or Recently Found , proceed to steps 3 and 4.
3.
Select the home location.
4.
Select Select .
The following options are available:
• Enter My Address : Sets the home location by entering the address.
2
Storing Your Home Address P. 8
• Use Current Location : Sets your current location as your home location.
• Recently Found : Sets the home location from a recently found location.
Saved Locations
You can save locations so you can quickly find them and create routes to them.
■
Saving a Saved Location
H u
1.
Select a search method.
u Find a location that you want to save.
2
2.
Select .
3.
Press the (Menu) icon or select
.
4.
Select Save .
u If necessary, enter a name and select Done .
5.
Select OK .
uu Personal Information u Saved Locations
Continued 19
20 uu Personal Information u Saved Locations
■
Saving a Saved Location Manually
H u (Back) u View Map
1.
Select a destination from the map.
2
2.
Select the destination name at the bottom of the map.
3.
Press the (Menu) icon or select
.
4.
Select Save .
u On some places other than POI, you can edit the place name.
5.
Select OK .
■
Saving Your Current Location
H u (Back) u View Map
1.
Select the vehicle icon.
2.
Select Save .
uu Personal Information u Saved Locations
1
Vehicle position may not be displayed when:
• The vehicle is traveling off-road.
• The vehicle position data cannot be updated.
3.
Enter a name of the location.
4.
Select Done .
5.
Select OK .
Continued 21
22 uu Personal Information u Saved Locations
■
Editing a Saved Location
H u u Saved
1.
Select a saved location you want to edit.
2.
Select .
3.
Press the (Menu) icon or select
.
4.
Select Edit .
5.
Select an option.
The following options are available:
• Name : Enters a new name for the location.
• Phone Number : Enters a phone number.
• Categories : Creates or changes the category in which this location is saved.
• Change Map Symbol : Select a new symbol.
uu Personal Information u Saved Locations
Continued 23
24 uu Personal Information u Saved Locations
■
Deleting a Saved Location
H u u Saved
1.
Select a saved location you want to delete.
2.
Select .
3.
Press the (Menu) icon or select
.
4.
Select Delete .
5.
Select Yes .
■
Deleting Saved Locations
H u u Saved
1.
Press the (Menu) icon or select
.
2.
Select Delete Saved Places .
3.
Select a saved location you want to delete.
u Select Select All to delete all saved locations.
4.
Select Delete .
5.
Select Yes .
uu Personal Information u Saved Locations
25
26
Display Mode Settings
Switching Display Mode Manually
Set the screen brightness separately for Day and Night modes. Press the
(Display Mode) button to cycle through the display modes (Day to Night to Off).
Press the button.
(Display Mode) u The Brightness bar is displayed for a few seconds.
u Select to brightness.
1
Switching Display Mode Manually
You can also adjust the display brightness by sliding or swiping on the Brightness bar.
You can change the touchscreen sensitivity setting.
2 Refer to the Owners Manual.
uu Display Mode Settings u Switching Display Mode Manually
Illumination control
(Display
Mode) button
Sunlight sensor *
(see your Owner’s
Manual for location)
Dash illumination adjustment knob
(see your Owner’s
Manual for location)
Headlights
(Auto * /On/Off)
Priority
1
2
3
4
Operation
Selects Day or Night display mode when the user wants to change the brightness of the display temporarily.
Remember: This button overrides all other display brightness adjustments either set automatically by the sunlight sensor or manually from the System settings screen.
If the sunlight sensor detects daylight and the headlights are turned on, the system automatically overrides the Night display and displays the Day display mode.
Remember: If desired, use the (Display Mode) button to override this automatic choice.
When the headlights are turned on, and you wish to have the Day display mode, adjust the illumination to the full brightness (beeps).
Remember: Adjust the dash brightness back to midrange to allow auto switching by sensing the headlights are on or off.
When turned on, the display changes to Night display mode.
The previous three controls listed above can
“cancel” this function.
Remember: Use the (Display Mode) button, or adjust the dash illumination to full brightness, to set the display to your desired choice.
* Not available on all models
27
Map & Vehicle
H u (Back) u Settings u Map & Vehicle
Change the map settings.
Select an option.
28
The following options are available:
• Vehicle : Changes the icon to represent your position on the map.
2
• Driving Map View : Sets the perspective on the map.
2
Driving Map View (Map Orientation) P. 30
• Map Detail : Sets the level of detail on the map. More detail may cause the map to draw slower.
2
• Map Theme : Changes the color of the map data.
2
• Map Buttons : Sets which icons are included on the map. Up to three icons can be included on the map.
2
• Map Layers : Sets the data that appears on the map.
2
• Dashboards : Sets the map dashboard layout.
2
uu Map & Vehicle u Vehicle
• myMaps : Sets which installed maps the system uses.
2
Vehicle
H u (Back) u Settings u Map & Vehicle u Vehicle
You can choose your vehicle icon.
1.
Select an option.
2.
Select Save .
1
The factory default is set to .
29
30 uu Map & Vehicle u Driving Map View (Map Orientation)
Driving Map View (Map Orientation)
H u (Back) u Settings u Map & Vehicle u Driving Map View
Select the map orientation.
1.
Select an option.
2.
Select Save .
The following options are available:
• Track Up : Displays the map with your direction of travel facing upwards.
• North Up : Displays the map with north always pointing up.
• 3-D (factory default): Displays the map in 3D with your direction of travel facing upwards.
Map Detail
H u (Back) u Settings u Map & Vehicle u Map Detail
Sets the level of detail on the map.
1.
Select an option.
2.
Select Save .
The following options are available:
• More : Shows more detail on the map.
• Normal (factory default): Shows a standard amount of detail on the map.
• Less : Shows less detail on the map.
uu Map & Vehicle u Map Detail
31
32 uu Map & Vehicle u Map Theme
Map Theme
H u (Back) u Settings u Map & Vehicle u Map Theme
Changes the color of the map data.
1.
Select an option.
2.
Select Save .
uu Map & Vehicle u Map Buttons
Map Buttons
H u (Back) u Settings u Map & Vehicle u Map Buttons
Sets up to three shortcuts that appear in the map tools menu.
1.
Select if you want to delete a shortcut and then select OK .
2.
Select to add a new shortcut.
1
Reset to Defaults
Resets the settings to the factory defaults.
3.
Select an option.
4.
Select Save .
33
34 uu Map & Vehicle u Map Layers
Map Layers
H u (Back) u Settings u Map & Vehicle u Map Layers
Sets the data that appears on the map screen.
1.
Select an option(s).
2.
Select Save .
1
Trip Log is set to off as factory default.
Dashboards
H u (Back) u Settings u Map & Vehicle u Dashboards
Switches the dashboard layout at the bottom of the map.
1.
Select
2.
Select Save .
myMaps
H u (Back) u Settings u Map & Vehicle u myMaps
Sets which installed maps the system uses.
Select an option(s).
uu Map & Vehicle u myMaps
35
Navigation
H u (Back) u Settings u Navigation
Changes the navigation settings.
36
The following options are available:
• Calculation Mode : Sets route preference.
2
• Avoidances : Sets road features to avoid on a route.
2
• Custom Avoidances : Allows you to avoid specific roads or areas.
2
• Advanced Detours : Sets the length of the detour.
• Voice Prompts : Turns the voice prompts on or off.
• GPS Simulator : Stops the system from receiving a GPS signal.
1
Advanced Detours and GPS Simulator are set to off as factory default.
Calculation Mode
H u (Back) u Settings u Navigation u Calculation Mode
Sets the route preference.
1.
Select an option.
2.
Select Save .
The following options are available:
• Faster Time (factory default): Calculates routes that are faster to drive but can be longer in distance.
• Shorter Distance : Calculates routes that are shorter in distance but can take more time to drive.
• Less Fuel : Calculates routes that could use less fuel than other routes.
uu Navigation u Calculation Mode
37
38 uu Navigation u Avoidances
Avoidances
H u (Back) u Settings u Navigation u Avoidances
Set preferences for route options to avoid.
1.
Select an option(s).
2.
Select Save .
1
Highways , Toll and Fees , and Ferries are set to off as factory default.
The following options are available:
• U-Turns : Avoids u-turns.
• Highways : Avoids highways.
• Toll and Fees : Avoids toll roads.
• Ferries : Avoids ferries.
• Carpool Lanes: Avoids car share lanes.
• Unpaved Roads : Avoids unpaved roads.
Custom Avoidances
H u (Back) u Settings u Navigation u Custom Avoidances
Allows you to avoid specific areas and sections of road. You can enable and disable custom avoidances as needed.
Select an option.
u Select Add Avoidance if custom avoidances are already stored.
The following options are available:
• Add Avoid Area : Sets an area to avoid.
2
• Add Avoid Road : Sets a road to avoid.
2
uu Navigation u Custom Avoidances
Continued 39
40 uu Navigation u Custom Avoidances
■
Adding an Avoid Area
H u (Back) u Settings u Navigation u Custom Avoidances u Add Avoid Area
1.
Select the upper-left (right) corner of the area to avoid. Select Next .
u The icon is displayed on the map.
2.
Select the lower-right (left) corner of the area to avoid. Select Next .
u The selected area is shaded on the map.
3.
Select Done .
■
Adding an Avoid Road
H u (Back) u Settings u Navigation u Custom Avoidances u Add Avoid Road
1.
Select the starting point of the section of road to avoid. Select
Next .
u The icon is displayed on the map.
uu Navigation u Custom Avoidances
Continued 41
42 uu Navigation u Custom Avoidances
2.
Select the ending point of the road section. Select Next .
u The selected road color changes.
3.
Select Done .
■
Editing a Custom Avoidance
H u (Back) u Settings u Navigation u Custom Avoidances
1.
Select the area or road to edit from the list.
2.
Select .
u The menu screen is displayed.
3.
Select an item.
The following items are available:
• Rename : Enters a new name.
• Delete : Deletes a selected area or road.
• Disable : Disables the avoidance.
Continued uu Navigation u Custom Avoidances
43
44 uu Navigation u Custom Avoidances
■
Deleting Custom Avoidances
H u (Back) u Settings u Navigation u Custom Avoidances
1.
Select .
1
Select if you want to search the saved custom avoidance.
2.
Select options you want to delete.
u Select Select All for all options in the list.
3.
Select Delete .
Traffic
H u (Back) u Settings u Traffic
Sets the traffic feature.
Select an option.
The following options are available:
• Traffic : Enables the traffic feature.
2
• Current Provider : Sets the traffic provider to use for traffic data.
• Subscriptions : Displays the lists of the current traffic subscriptions.
• Optimize Route : Sets whether to use optimized alternate routes On Request
(factory default) or Automatic .
45
46
Other Settings
Units
H u (Back) u Settings u Units u Units
Set the units and display on the map of the navigation system.
1.
Select an option.
2.
Select Save .
The following options are available:
• Miles (factory default): Sets the units to miles.
• Kilometers : Sets the units to kilometers.
Language & Keyboard
H u (Back) u Settings u Language & Keyboard
Set the language for the unit and the keyboard layout.
Select an option.
uu Other Settings u Language & Keyboard
1
When you select a language for the audio system, the language setting of the navigation system is automatically switched.
See the Owner’s Manual for instructions.
The following options are available:
• Voice Language : Sets the language for voice prompts.
2
• Keyboard Language : Sets the language for your keyboard.
2
• Keyboard Layout : Sets the keyboard layout.
2
Continued 47
48 uu Other Settings u Language & Keyboard
■
Voice Language
H u (Back) u Settings u Language & Keyboard u Voice
Language
1.
Select an option.
2.
Select Save .
■
Keyboard Language
H u (Back) u Settings u Language & Keyboard u Keyboard
Language
1.
Select an option.
2.
Select Save .
■
Keyboard Layout
H u (Back) u Settings u Language & Keyboard u Keyboard
Layout
1.
Select an option.
2.
Select Save .
The following options are available:
• QWERTY (factory default): Sets the keyboard layout to QWERTY.
• ABCDE : Sets the keyboard layout to ABCDE.
uu Other Settings u Language & Keyboard
49
50 uu Other Settings u Device
Device
H u (Back) u Settings u Device
Select an option.
The following options are available:
• About : Displays the device information.
2
• Travel History : Allows the system to record information for suggested routes, previous routes and destinations, and Trip Log features.
• Clear Travel History : Deletes the recorded information.
• Update Map : Displays the description screen of map update.
2
Obtaining a Navigation Update P. 134
■
About
H u (Back) u Settings u Device u About
Displays the device information.
uu Other Settings u Device
51
52
Data Reset
Reset Factory Default Settings
H u (Back) u Settings u (Menu)
You can restore all settings to the factory default values.
1.
Select Restore .
2.
Select Yes .
1
Reset Factory Default Settings
When you want to reset the following options, see the below references:
• Home
2
Deleting Saved Locations P. 25
• Recent
2
• Saved
2
When you press the (Menu) icon or select in each settings category, you can restore the selected category.
When you transfer the vehicle to a third party, reset all settings to default and delete all personal data.
Navigation
This section describes how to enter a destination, select a route to take, and follow the route to your destination. It also describes how to change your route or destination along the way.
Entering a Destination ............................54
HONDA ..................................................60
Address ..................................................61
Categories ..............................................66
Saved......................................................72
Recent ....................................................72
Map Input...............................................73
Calculating the Route ..............................74
Viewing and Selecting the Routes ...........75
Viewing the Destination Map ..................76
Driving to Your Destination ...................77
Viewing the Route ..................................77
Map Operation ........................................81
Map Menu..............................................82
Traffic Information ..............................86
Changing Your Route ............................. 91
Stopping the Route ................................ 91
Taking a Detour ..................................... 92
Adding Waypoints ................................. 94
Changing Your Destination ................... 95
Selecting a Destination on the Map ........ 95
Searching Near Establishment ................ 96
Entering a New Destination .................... 98
Entering a New Destination from Trip
Planner................................................. 99
Editing the Destination List ................... 103
53
Entering a Destination
54
H u
This section describes how to enter a destination for route guidance.
Select an option.
Shortcuts
The following options are available:
• Enter Search : Sets a destination by entering a category, name, address, or city name.
2
• Searching near : Selects the city to search near.
2
Changing the Search Area P. 57
• Go Home : Sets your home address as the destination.
2
• HONDA : Sets a nearby Honda dealer as the destination.
2
• Places : Launches HondaLink TM to search for places.
For more details, see the Owner's Manual.
• Address : Sets a destination by entering an address.
2
• Categories : Sets a destination by selecting a category.
2
1
The Display Audio system can only provide route guidance from one navigation system at a time. When setting a destination on one system, any active route guidance with the other system is canceled, and the system you are currently using will direct you to your destination.
To use HondaLink TM , you must connect your smartphone to the system.
For more details about smartphone connection and how to use HondaLink TM , see the Owner's Manual.
If you press the (DISP) button on the steering wheel and select Navigation Menu while on the map screen, the following items are available. Use the steering wheel buttons to select the items.
• Go Home
• Recent Destination
• Calculation Mode
• Saved Places
• Stop
• Add New Address
(DISP) Button
• Saved : Sets a destination by selecting a place stored in the Saved list.
2
• Recent : Sets a destination by selecting a previous destination.
2
• Add Shortcut : Adds shortcuts to the Where To?
menu.
2
uu Entering a Destination u
Continued 55
56 uu Entering a Destination u
■
H
Using the Search Bar
u u Enter Search
You can use the search bar to search for locations by entering a category, name, address, company phone number, or city name.
1.
Enter a search term.
u The search history is displayed below the search bar.
u Suggested search terms appear below the search bar as you type.
2.
Select or a suggested search term.
3.
Select your destination from the list.
4.
Select Go!
to set the route to your destination.
2
1
Using Voice Command
You can say the names of popular, well-known locations.
From the Voice Portal screen, say “ Navigation.
”
Say ,” then say a place name (e.g.,
“ Honda ”).
Say the line number of screen (e.g., “ 1 ”).
Say ” or “ Yes ” to set the route.
2
2
• To search for a type of business, enter a category name, such as “movie theaters.”
• To search for a business by name, enter all or part of the name.
• To search for an address near you, enter the street number and street name.
• To search for an address in another city, enter the street number, street name, city, and state.
• To search for a city, enter the city and state.
If you want to delete the search history, select
Restore .
2
Reset Factory Default Settings P. 52
uu Entering a Destination u
■
Changing the Search Area
H u u Searching near
By default, your system finds locations closest to your current location. You can find a location near another city or location.
Select an option.
1
My Active Route and My Destination can be set when the route is active.
The following options are available:
• Where I Am Now : Searches near your current location.
• My Active Route : Searches along your current route.
• My Destination : Searches near your current destination.
• A Different City : Searches near the city you enter.
• Recent Destination : Searches near a recent destination.
• Saved Place : Searches near a saved place.
Continued 57
58 uu Entering a Destination u
■
Adding Shortcuts
H u u Add Shortcut
Up to 36 shortcut icons can be stored.
Select an option you want to add as a shortcut.
■
Deleting Shortcuts
H u u (Menu) u Remove Shortcut(s)
1.
Select a shortcut with if you want to delete it.
2.
Select Touch to Remove .
3.
Select Save .
uu Entering a Destination u
59
60 uu Entering a Destination u HONDA
HONDA
H u u HONDA
Find any Honda authorized dealers to set as a destination.
1.
Select the desired name from the list.
2.
Select Go!
to set the route to your destination.
2
uu Entering a Destination u Address
Address
H u u Address
Enter an address to use as the destination. The state or country you are currently in is displayed.
Select an option.
The following options are available:
• Spell City : Selects your destination city.
2
• Enter Postal Code : Selects your destination postal code.
2
Selecting the Postal Code P. 65
• Search All : Sets an address to use as the destination.
2
• State or Country : Selects the state or country.
2
Selecting the State/Country P. 62
1
Using Voice Command
You can say the entire address at once using voice commands.
From the Voice Portal screen, say “ Navigation.
”
Say ” on the voice command screen, then say the entire address. (e.g., “ 1-2-3-4
Main Street, Los Angeles, California ”).
Say ” if you want to change the country.
The system interprets the address.
Say ” or a line number of a screen if the destination list appears (e.g., “ 1 ”).
Say ” or “ Yes ” to set the route.
2
2
Continued 61
62 uu Entering a Destination u Address
■
Selecting the State/Country
H u u Address u State or Country
1.
Enter a state or country name.
2.
Select a state or country from the list.
uu Entering a Destination u Address
■
Search All
H u u Address u Search All
1.
Enter the house number. Select
Done .
1
The order of the steps may change depending on the map data loaded on your system.
2.
Enter the street name. Select
Done .
u A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list.
3.
Select your destination from the list.
u If the select city screen is displayed, select a city.
4.
Select Go!
to set the route to your destination.
2
Continued 63
64 uu Entering a Destination u Address
■
Selecting the City
H u u Address u Spell City
1.
Enter the name of a different city.
Select Done .
u A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list.
1
You do not need to enter spaces or symbols (e.g., &,
-, %).
The order of the steps may change depending on the map data loaded on your system.
2.
Select your destination city from the list.
u Next, you are prompted to enter a house number.
2
uu Entering a Destination u Address
■
Selecting the Postal Code
H u u Address u Enter Postal Code
1.
Enter the postal code. Select
Done .
2.
Select your destination postal code from the list.
3.
Enter the house number. Select
Done .
4.
Enter the street name. Select
Done .
1
The order of the steps may change depending on the map data loaded on your system.
5.
Select your destination street from the list.
2
65
66 uu Entering a Destination u Categories
Categories
Select the category of a place (e.g., Restaurants, Gas Stations, Shopping) stored in the map database to search for the destination.
■
Finding a Location by Category
H u u Categories
1.
Select a category.
2.
Select a subcategory.
u If the subcategory screen is not displayed, proceed to step 3.
1
This option is convenient if you do not know the exact name of a place or if you want to narrow down the number of matches returned for places with a common name.
When you set the destination or waypoint, the same categories of icons do not appear.
Using Voice Command
You can find a place by the name using voice commands.
From the Voice Portal screen, say “ Navigation.
Say ” on the voice command screen, then say a category (e.g., “ Fast Food ”).
Say ” if you want to confirm the category list.
Say a subcategory if the subcategory screen is displayed.
Say a line number of a screen (e.g., “ 1 ”).
Say ” or “ Yes ” to set the route.
2
2
uu Entering a Destination u Categories
3.
Select a place name from the list.
4.
Select Go!
to set the route to your destination.
2
1
Quick Search screen
After you have performed a search for a destination, certain categories display a Quick Search list that display several destinations you selected.
Continued 67
68 uu Entering a Destination u Categories
■
H
Finding a Location by Intersections
u u Categories u Intersections
Select the intersection of two streets as the destination.
1.
Select Spell City .
u If selecting Search All , proceed to step 4.
u Select State or Country , if necessary.
2
2.
Enter a city name. Select Done .
u A list of matching hits is automatically displayed after you enter several letters with the closest match at the top of the list.
3.
Select a city.
1
Finding a Location by Intersections
If there is more than one intersection, you are prompted to select the intersection.
Using Voice Command
You can find intersections by the street name using voice commands.
From the Voice Portal screen, say “ Navigation.
”
Say ” on the voice command screen and then say a city name.
Say a street name 1, then say a line number of a screen (e.g., “ 1 ”).
Say a street name 2, then say a line number of a screen (e.g., “ 1 ”).
Say ” or “ Yes ” to set the route.
2
2
4.
Enter the street 1 name. Select
Done .
u A list of matching hits is automatically displayed after you enter several letters with the closest match at the top of the list.
5.
Select the street from the list.
u Repeat step 4 to enter the street 2 name.
6.
Select the intersection.
7.
Select Go!
to set the route to your destination.
2
uu Entering a Destination u Categories
Continued 69
70 uu Entering a Destination u Categories
■
Finding a City
H u u Categories u Cities
Selects your destination city.
1.
Select a city.
u Select Enter Search and enter a city name if you want to narrow down the number of matches.
2.
Select Go!
to set the route to your destination.
2
1
Using Voice Command
You can find a city by using voice commands.
From the Voice Portal screen, say “ Navigation.
”
Say ” on the voice command screen, then say a city name. (e.g., “ Los Angeles ”).
Say a line number of a screen (e.g., “ 1 ”).
Say ” or “ Yes ” to set the route.
2
2
uu Entering a Destination u Categories
■
H
Finding a Location Using Coordinates
u u Categories u Coordinates
You can find a location using latitude and longitude coordinates. This can be helpful when geocaching.
1.
Select the latitude coordinate.
2.
Enter the new coordinate. Select
Done .
3.
Select the longitude coordinate.
4.
Enter the new coordinate. Select
Done .
5.
Select View on Map .
6.
Select Go!
to set the route to your destination.
2
1
Finding a Location Using Coordinates
If you want to change the coordinate format, press the (Menu) icon or select and then select
Format .
71
72 uu Entering a Destination u Saved
Saved
H u u Saved
Select a saved location to use as the destination.
1.
Select your destination from the list.
2.
Select Go!
to set the route to your destination.
2
1
You can add, edit, or delete the saved place.
2
Using Voice Command
You can utilize a saved place by using voice commands.
From the Voice Portal screen, say “ Navigation.
”
Say ” on the voice command screen, then say a saved place (e.g., “ Honda ”).
Say ” if you want to confirm all saved places.
Say ” or “ Yes ” to set the route.
2
2
Recent
H u u Recent
Select an address from a list of your 50 most recent destinations to use as the destination. The list is displayed with the most recent destination at the top.
1.
Select your destination from the list.
2.
Select Go!
to set the route to your destination.
2
1
If you want to delete all recent destinations, press the
(Menu) icon or select and then select Clear .
Using Voice Command
You can utilize a recent destination by using voice commands.
From the Voice Portal screen, say “ Navigation.
”
Say ” on the voice command screen, then say a line number of a screen (e.g.,
” 1 ”).
Say ” or “ Yes ” to set the route.
2
2
uu Entering a Destination u Map Input
Map Input
H u (Back) u View Map
Scroll the map to manually select an icon or a location as the destination.
1.
Select any point on the map, a street, intersection, or category icon.
u Return to the current location when you press the (Back) icon.
2.
Select Go!
to set the route to your destination.
2
1
“ View Map ”
2
2
You can customize the map as you like using ,
2
If you want to display a specific category of places, select and then select a category icon.
The place information is displayed when you select
on the map.
2
Viewing the Destination Map P. 76
73
74
Calculating the Route
This section describes how to calculate your route.
Select Go!
.
u The system calculates and displays the route line on the map screen.
1
If the system has many guidance points on the route to the destination, it may stop calculation.
In this case, the route guidance will start when you select OK .
The following options are available:
• Routes : Displays different routes.
2
Viewing and Selecting the Routes P. 75
• : Displays the destination on the map.
2
Viewing the Destination Map P. 76
uu Calculating the Route u Viewing and Selecting the Routes
Viewing and Selecting the Routes
View and select different routes to your destination.
1.
Select or to change a route.
u The travel distance, estimated travel time, and traffic information are displayed for each route.
2.
Select Go!
.
u The system calculates and displays the route line on the map screen.
75
76 uu Calculating the Route u Viewing the Destination Map
Viewing the Destination Map
1.
Select an option.
2.
Select Go!
.
u The system calculates and displays the route line on the map screen.
1
When you press the (Menu) icon or select , you can add to the saved location list.
2
The following options are available:
• Route Info : Displays different routes.
2
Viewing and Selecting the Routes P. 75
• Set Location : Sets the vehicle position when you are indoors or not receiving satellite signals.
You can use this feature when GPS Simulator is set to on.
2
Driving to Your Destination
Viewing the Route
This section describes how to follow the route guidance to your destination.
■
Map Screen
Next guidance indicator
After calculating the route to your destination, the route is displayed on the map screen.
2
As you drive, the system tracks your position on the map in real time and provides guidance as you approach each guidance point on the route.
1
When your phone is connected to Bluetooth ®
HandsFreeLink ® , the navigation screen will switch to the incoming call screen when receiving a call.
Speed limit icon
The speed limit shown on the map may be different from the actual speed limit.
The speed limit icon is not displayed on all roads.
Select the vehicle icon to view the Where Am I?
screen.
2
Viewing the Current Location Information
Dashboards
Speed limit icon
The following options are available:
• Select the text bar on the top of the map to display the turn list screen.
2
• Select the next guidance indicator to display the turn information screen or intersection view screen.
2
• Select to cancel the route guidance and remove your current route.
2
• Select to display the map menu.
2
• Select to display the parking information screen of nearby parking.
You can stop your vehicle en route (e.g., to rest, stop for gas, etc.), and then continue on your route.
If you did not complete your route, the navigation restarts when you restart your vehicle.
When LaneWatch is activated, the navigation screen will switch to the LaneWatch screen.
Continued 77
78 uu Driving to Your Destination u Viewing the Route
• Select the map dashboards when you want to change the information that is displayed. Select the following options:
Arrival Time , Distance , Time to Destination , Via Arrival , Distance to Via ,
Time to Via , Direction of Travel , Elevation .
■
Turn List
The turn list screen displays turn-by-turn instructions and the distance between turns.
Select the text bar on the top of the map.
u Select a turn to display the detailed information.
2
u Press the (Menu) icon or select
to display the entire route on the map.
2
1
The next guidance indicator does not appear in the following cases.
• The vehicle speed is 3 mph (4.8 km/h) or less
• The GPS signal is weak
• The vehicle position on the map and current vehicle position do not match
The system displays a roundabout to the next guidance indicator in the following cases.
• Its diameter is 82 ft (25 m) or more
• There is no road inside it
• There is no stop sign
Turn-by-Turn Directions
The next guidance point appears on the Driver
Information Interface (DII).
The Turn-by-Turn directions may not be displayed if the information cannot be received correctly.
uu Driving to Your Destination u Viewing the Route
■
Turn Information
The turn information screen displays the turn on the map and the distance and time remaining before you reach the turn. The lane assist screen may display a view of the upcoming intersection.
Select the next guidance indicator of the map or select any turn on the turn list screen.
1
Intersection View Screen
The intersection view screen displays a view of the upcoming intersection and which lane you should be driving.
■
Entire Route
The entire route screen displays the entire route, destination name, time to destination, and distance to destination.
1.
Select the text bar on the top of the map.
2.
Press the (Menu) icon or select
.
3.
Select Map to display the entire route screen.
u Press the (Back) icon to return to the previous screen.
Continued 79
80 uu Driving to Your Destination u Viewing the Route
■
Deviating From the Planned Route
If you leave the calculated route, the system automatically recalculates a route to the set destination based on your current location and direction.
■
Trip Log Display
If you set the trip log to show, a series of lines (breadcrumbs) are displayed to track the path you are taking.
2
1
You can delete the Trip Log.
2
2
Reset Factory Default Settings P. 52
Map Operation
Customize the map, set a destination, and save a place from the map.
1.
Select any point on the map.
2.
Select an option.
u If you want to set a destination or save a location in the map, scroll the map and select the desired location.
2
2
1
When you select Track Up or North Up , the current map scale and the (Track Up only) appear on the map.
The always points to North.
2
Driving Map View (Map Orientation) P. 30
•
•
•
The following options are available:
• : Zooms in to the map.
• : Zooms out of the map.
: Switches the map to 2D or 3D.
: Rotates the 3D map.
: Sets the data that appears on the map.
2
81
uu Map Operation u Map Menu
Map Menu
H u (Menu)
Select an option.
1
You can also display the map menu by selecting on the map screen.
82
The following options are available:
• Where To?
: Enters a new destination.
2
• Traffic : Displays the traffic information screen.
2
• Mute : Turns the voice prompts on or off.
• Stop : Cancels the route guidance and removes your current route.
• Detour : Calculates a detour route.
2
• Exit Services : Displays a list of the exit services for the route.
2
• Where Am I?
: Displays the information about your current location.
2
Viewing the Current Location Information P. 84
• Map Layers : Sets the data that appears on the map.
2
• ecoRoute TM : Uses the ecoRoute TM features.
2
• Settings : Changes settings for navigation functions.
2
uu Map Operation u Map Menu
■
Viewing Exit Services
H u (Menu) u Exit Services
You can view exit services (e.g., whether the exit is near gas stations, restaurants, etc.) and add new destinations or waypoints to the calculated route.
1.
Select or to display your desired list of exit services.
2.
Select a category tab.
3.
Select an option.
u The location is displayed on the
Calculate Route screen.
2
1
The map screen of the selected exit is displayed when you select .
Continued 83
84 uu Map Operation u Map Menu
■
Viewing the Current Location Information
H u (Menu) u Where Am I?
You can confirm your current location, address, and nearest intersection.
Select an option.
1
Viewing the Current Location Information
Vehicle position may not be displayed when:
• The vehicle is traveling off-road.
• The vehicle position data cannot be updated.
The following options are available:
• Save : Saves your current location.
2
Saving Your Current Location P. 21
• Hospitals / Police Stations / Fuel : Searches for a hospital, police station, or gas station around your current location.
2
Searching Near Establishment P. 96
■
Using Directions to Me
H u (Menu) u Where Am I?
Get a list of directions to your current location.
1.
Press the (Menu) icon or select
.
2.
Select Directions to Me .
3.
Select an option.
4.
Select Select .
u The turn list screen displays turn-by-turn instructions and the distance between turns.
2
uu Map Operation u Map Menu
85
86 uu Map Operation u Traffic Information
Traffic Information
When you set the traffic feature, the system examines traffic conditions and optimizes the route for the shortest time. If a severe traffic delay occurs while you are navigating, the system searches for a faster route. If it finds one, the system will prompt you and you can choose to accept the new route.
The traffic icon changes color to indicate the severity of traffic conditions on your route or on the road you are currently traveling. The system may route you through a traffic delay if a better alternative route does not exist. The delay time is added into your estimated time of arrival automatically.
1.
Select on the map screen.
1
Continuously updated traffic information is available in major metropolitan areas across contiguous United
States and some cities in Canada.
You can change the traffic information settings.
2
The traffic icon changes color to indicate the severity of traffic conditions.
• Green: Flowing freely.
• Yellow: Moderate traffic condition.
• Red: Very slow or stop-and-go traffic.
• Gray: No traffic data.
2.
Select an option.
The following options are available:
• Alternate Route : Displays the alternate route screen.
2
• Traffic On Route : Displays the traffic delays on your route. You can select the traffic you want to avoid.
2
Traffic Rerouting Manually P. 89
• Traffic Conditions : Displays the traffic flow and delays on nearby roads.
2
• Traffic Legend : Displays an overview of traffic legends.
2
uu Map Operation u Traffic Information
Continued 87
88 uu Map Operation u Traffic Information
■
Alternate Route
H u u Alternate Route
Display the alternate route screen.
Select Go!
.
■
Traffic Rerouting Manually
H u u Traffic On Route
View the traffic delays on your route, including the estimated time of each delay and the distance to each delay. You can select the traffic you want to avoid manually.
1.
Display a list of traffic events.
2.
Select an option.
3.
Select and then select Avoid to avoid the traffic delay.
u Select or to view other traffic delays on your route.
uu Map Operation u Traffic Information
Continued 89
90 uu Map Operation u Traffic Information
■
Viewing Traffic Delays
H u u Traffic Conditions
View the traffic flow and delays on nearby roads.
u Select if you want to display a list of traffic delays.
■
Viewing Traffic Legends
H u u Traffic Legend
See an overview of the icons and colors used on the traffic map.
The system displays the traffic legend.
Changing Your Route
Stopping the Route
Stop the route guidance and remove the destination and all waypoints.
Select .
1
“ Stop route ”
2
2
You can also stop your route from the map menu.
2
91
92 uu Changing Your Route u Taking a Detour
Taking a Detour
H u (Menu) u Detour (when en route)
Calculate a new route to avoid something ahead of you. The system creates a new route if possible. The system attempts to get you back on your original route as quickly as possible.
1
“ Detour ”
2
2
If your current route is the only reasonable option, the system might not calculate a detour.
■
Taking a Detour Around Specified Areas
You can take a detour for a specified distance along your route or detour around specific roads. This is useful if you encounter construction zones, closed roads, or poor road conditions.
Select an option.
1
Taking a Detour Around Specified Areas
You can use this feature when Advanced Detours is set to On.
2
Select to delete all detours.
The following options are available:
• Next 0.5 mi on Route : Calculates a new route by avoiding the next 0.5 mile on your route.
• Next 2 mi on Route : Calculates a new route by avoiding the next 2 miles on your route.
• Next 5 mi on Route : Calculates a new route by avoiding the next 5 miles on your route.
• Detour by Road(s) on Route : Calculates a new route by avoiding the specific roads on your route. Select roads from the turn list.
uu Changing Your Route u Taking a Detour
93
94 uu Changing Your Route u Adding Waypoints
Adding Waypoints
Add waypoints (pit stops) along the route to your destination.
1.
While en route, select a search method to add a new destination or waypoint.
2
2.
Select a place. Select Go!
.
3.
Select Add to Active Route .
u Select Start New Route to set the location as your new destination.
2
4.
Select and hold , or and then move the destination to the desired position.
5.
Select Done .
u The route is automatically recalculated and displayed on the map screen.
1
When you add a waypoint, the system may take some time to update the arrival time.
Changing Your Destination
Selecting a Destination on the Map
Select a new destination when en route by selecting a location on the map.
1.
Select any point on the map, or a street, intersection, or category icon.
2.
Select Go!
.
3.
Select an option.
The following options are available:
• Start New Route : Sets the location as your new destination.
• Add to Active Route : Sets the location as the first waypoint in the Edit Route screen.
2
95
96 uu Changing Your Destination u Searching Near Establishment
Searching Near Establishment
H u (Menu) u Where Am I?
Search for a hospital, police station, or gas station around your current location.
1.
Select a category type.
u You can also confirm your current location, address, and nearest intersection.
2.
Select a place.
3.
Select Go!
.
4.
Select an option.
uu Changing Your Destination u Searching Near Establishment
The following options are available:
• Start New Route : Sets the location as your new destination.
• Add to Active Route : Sets the location as the first waypoint in the Edit Route screen.
2
97
uu Changing Your Destination u Entering a New Destination
Entering a New Destination
H u
Enter a new destination using the destination menu screen even when you are en route.
1.
Select a search method to enter a new destination.
2
2.
Select a place and then select Go!
.
1
You can also display the Where To? screen by pressing (Back) icon on the navigation top screen.
3.
Select an option.
98
The following options are available:
• Start New Route : Sets the location as your new destination.
• Add to Active Route : Sets the location as the first waypoint in the Edit Route screen.
2
uu Changing Your Destination u Entering a New Destination from Trip Planner
Entering a New Destination from Trip Planner
You can use the trip planner to create and save a route with multiple destinations.
■
Creating Your Route
H u (Back) u Apps u Trip Planner u New Trip u Select Start
Location
1.
Select a method to enter a new destination.
2
2.
Select Select .
3.
Select to add additional locations.
u Repeat steps 1 and 2 to enter the destination.
u Select and hold , or and then move the destination to the desired position.
u Select to delete unwanted destinations.
4.
Select Next .
Continued 99
100 uu Changing Your Destination u Entering a New Destination from Trip Planner
5.
Enter a route name.
6.
Select Done .
7.
Select Go!
.
u Select Map to display the destination and waypoints on the map screen.
2
u Select to display the Edit
Trip screen.
2
8.
Select the next destination from the list.
9.
Select Start .
u The route is automatically recalculated and displayed on the map screen.
uu Changing Your Destination u Entering a New Destination from Trip Planner
■
Using the Saved Route
H u (Back) u Apps u Trip Planner
1.
Select a saved route.
2.
Select Go!
.
3.
Select the next destination from the list.
4.
Select Start .
u The route is automatically recalculated and displayed on the map screen.
■
Editing the Saved Route
H u (Back) u Apps u Trip Planner
1.
Select a saved route you want to edit.
2.
Select .
Continued 101
102 uu Changing Your Destination u Entering a New Destination from Trip Planner
3.
Select an option.
The following options are available:
• Edit Destinations : Edits the destination list of the saved trip.
2
• Delete Trip : Deletes a saved trip.
• Rename Trip : Enters a new name for the saved trip.
• Optimize Order : Automatically orders the waypoints in the destination list.
2
Reorder Your Destination List Automatically P. 106
• Route Preference : Changes the route preferences (calculating method).
2
Recalculate Using Another Route Preference P. 107
Editing the Destination List
You can use the trip planner to edit and save a route with multiple destinations.
■
Editing Places on the Your Route
H u (Back) u Apps u Trip Planner
1.
Select the trip you want to edit.
uu Changing Your Destination u Editing the Destination List
1
Select Map to display the destination and waypoints on the map screen.
2
2.
Select a place from the destination list.
Continued 103
104 uu Changing Your Destination u Editing the Destination List
3.
Select an option.
The following options are available:
• Departure Time (current location only): Sets the departure time.
• Clear Departure Time (current location only): Clears the departure time.
• Arrival Time (destination and waypoints): Sets the arrival time.
• Clear Arrival Time (destination and waypoints): Clears the arrival time.
• Duration (waypoints only): Sets the duration time.
• Change Location : Changes the destination or waypoint.
• Remove Location : Removes the destination or waypoint.
• Rename Location : Enters a new name for the location.
uu Changing Your Destination u Editing the Destination List
■
Editing Your Route
H u (Back) u Apps u Trip Planner
1.
Select the trip you want to edit.
2.
Select .
3.
Select Edit Destinations .
4.
Select hold , and then move the destination to the desired position.
u Select to add a new location.
u Select to delete destinations from the destination list.
5.
Select Save .
u The route is automatically recalculated.
Continued 105
106 uu Changing Your Destination u Editing the Destination List
■
Saving Your Route
H u (Back) u Apps u Trip Planner (when en route)
1.
Select Unsaved Trip .
2.
Select .
3.
Select Save Trip .
4.
Enter a route name.
5.
Select Done .
■
Reorder Your Destination List Automatically
H u (Back) u Apps u Trip Planner
Automatically order the waypoints in the destination list.
1.
Select the trip you want to edit.
2.
Select .
3.
Select Optimize Order .
4.
Select Map to display the destination and waypoints on the map screen.
uu Changing Your Destination u Editing the Destination List
■
Recalculate Using Another Route Preference
H u (Back) u Apps u Trip Planner
The route preference is just for this time. If you want to change the route preference for routing, change the navigation settings.
2
Recalculates the route using another route preference.
1.
Select the trip you want to edit.
2.
Select .
3.
Select Route Preference .
4.
Select an option.
5.
Select Save .
u The route is automatically recalculated.
107
108
Other Features
This section describes the useful functions incorporated into the navigation system.
About Apps Menu ................................ 110
ecoRoute TM ............................................ 111
Setting Up the Vehicle Profile ............... 112
Viewing the Vehicle Profile ................... 114
Calibrating the Fuel Economy ............... 115
Viewing the ecoChallenge Scores ......... 116
Viewing Fuel Economy Information ...... 117
Viewing a Mileage Report .................... 118
Information Functions .......................... 119
Help..................................................... 119
Where I've Been ................................... 120
Calculator ............................................ 121
Unit Converter ..................................... 122
GPS Information................................... 123
109
About Apps Menu
H u (Back) u Apps
Display the useful functions incorporated into the navigation system.
Select an option.
110
The following options are available:
• Help : Displays the Help function.
2
• ecoRoute TM : Allows for mileage and fuel cost entry and displays fuel economy information, mileage reports, your driving habits, and vehicle information.
2
• Trip Planner : Sets the trip planner to create and save a trip with multiple destinations.
2
Editing the Destination List P. 103
2
Entering a New Destination from Trip Planner P. 99
• Where I've Been : Displays your previous routes and places you have stopped on the map.
2
• Calculator : Displays the calculator function.
2
• Unit Converter : Displays the unit converter function.
2
ecoRoute
TM
H u (Back) u Apps u ecoRoute TM
The ecoRoute TM feature calculates the fuel economy and the fuel price of navigating to a destination and offers tools for improving fuel efficiency.
The data provided by the ecoRoute TM feature is an estimate only.
To receive more accurate fuel reports for your specific vehicle and driving habits, calibrate the fuel economy.
Select an option.
1
The first time you use the ecoRoute TM features, you must enter vehicle information.
2
Setting Up the Vehicle Profile P. 112
The following options are available:
• At The Pump : Calibrates the fuel economy to receive more accurate fuel reports.
2
Calibrating the Fuel Economy P. 115
• ecoChallenge : Helps you maximize the vehicle fuel economy by scoring your driving habits.
2
Viewing the ecoChallenge Scores P. 116
• Fuel Economy : Displays fuel economy information.
2
Viewing Fuel Economy Information P. 117
• Vehicle Profile : Checks or resets your vehicle information.
2
Viewing the Vehicle Profile P. 114
• Mileage Report : Displays mileage reports for your vehicle.
2
Viewing a Mileage Report P. 118
111
112 uu ecoRoute TM u Setting Up the Vehicle Profile
Setting Up the Vehicle Profile
H u (Back) u Apps u ecoRoute TM
The first time you use the ecoRoute TM features, you must enter vehicle information.
1.
Select Yes .
2.
Select a fuel type.
3.
Select Next .
4.
Enter your estimated city fuel economy.
5.
Select Next .
6.
Enter your estimated highway fuel economy.
7.
Select Next .
8.
Enter the fuel price.
9.
Select Next .
u The confirmation message will appear.
10.
Select OK .
uu ecoRoute TM u Setting Up the Vehicle Profile
113
114 uu ecoRoute TM u Viewing the Vehicle Profile
Viewing the Vehicle Profile
H u (Back) u Apps u ecoRoute TM
Select Vehicle Profile .
u If you want to reset the Vehicle
Profile , select Reset .
Calibrating the Fuel Economy
H u (Back) u Apps u ecoRoute TM u At The Pump
You can calibrate the fuel economy to receive more accurate fuel reports for your specific vehicle and driving habits. You should calibrate when you fill up your fuel tank.
1.
Enter the current fuel price.
2.
Enter the amount of fuel the vehicle has used since the last time the fuel tank was filled.
3.
Enter the distance you have traveled since the last time the fuel tank was filled.
4.
Select Next .
u The system calculates the average vehicle fuel economy.
5.
Select Save .
uu ecoRoute TM u Calibrating the Fuel Economy
115
uu ecoRoute TM u Viewing the ecoChallenge Scores
Viewing the ecoChallenge Scores
H u (Back) u Apps u ecoRoute TM u ecoChallenge
The ecoChallenge feature helps you maximize fuel economy by scoring your driving habits. When your ecoChallenge scores are high, it means you have saved more fuel.
The ecoChallenge collects data and calculates a score whenever the vehicle is moving.
1
Viewing the ecoChallenge Scores
If you want to reset the ecoChallenge scores, select
and then select Reset .
116
The following information is displayed:
• Current : Displays the score for your current driving activity.
• Overall : Displays an average of the speed, acceleration, and braking score.
• Speed : Displays your score for driving your vehicle at the optimal speed for conserving fuel (45–60 mph (72–96 km/h) for most vehicles).
• Acceleration : Displays your score for smooth and gradual acceleration. You lose points for rapid acceleration.
• Braking : Displays your score for smooth and gradual braking. You lose points for hard braking.
uu ecoRoute TM u Viewing Fuel Economy Information
Viewing Fuel Economy Information
H u (Back) u Apps u ecoRoute TM u Fuel Economy
You can view your fuel consumption, your total fuel cost, and your average fuel economy.
Select a section of the graph to zoom in.
1
Viewing Fuel Economy Information
If you want to reset the Fuel Economy information, select and then select Reset .
117
118 uu ecoRoute TM u Viewing a Mileage Report
Viewing a Mileage Report
H u (Back) u Apps u ecoRoute TM u Mileage Report
You can view the mileage reports on the system.
Select a report.
1
Mileage Reports
Mileage reports provide the distance, the time, the average fuel economy, and the fuel cost of navigating to a destination.
A mileage report is created for every route that you drive. If you stop a route on the system, a mileage report is created for the distance you traveled.
u Display the Mileage Report.
Information Functions
Help
H u (Back) u Apps u Help
Select a help topic you want to display.
1
You can also display the help topic to select on each menu screen.
■
Searching Help Topics
H u (Back) u Apps u Help u
1.
Enter a keyword. Select Done .
Continued 119
120 uu Information Functions u Where I've Been
2.
Select a help topic you want to display.
Where I've Been
H u (Back) u Apps u Where I've Been
Before you can use this feature, you must enable the travel history feature. You can view your previous routes and places you have stopped on the map.
1
If you want to delete the recorded information, select
and then select Clear Travel History .
If you select , you can select the day to display the travel history.
Calculator
H u (Back) u Apps u Calculator
Enter a numeric value to calculate.
uu Information Functions u Calculator
121
122 uu Information Functions u Unit Converter
Unit Converter
H u (Back) u Apps u Unit Converter
1.
If necessary, select a measurement category (e.g., Distance ).
u Select a measurement category from the list. Select Save .
2.
If necessary, select a unit of measurement (e.g., km ).
u Select a unit of measurement from the list. Select Save .
3.
Enter a numeric value to convert
(e.g., 1000). Select Done .
GPS Information
H u (Back)
The GPS info screen displays the satellites’ status.
Select and hold .
u A solid bar indicates that the GPS satellite is ready for use.
uu Information Functions u GPS Information
123
124
Troubleshooting
Troubleshooting ................................... 126
Map, Voice, Entering Destinations ........ 126
Traffic .................................................. 127
Guidance, Routing ............................... 128
Update, Coverage, Map Errors ............. 129
Display, Accessories.............................. 129
Miscellaneous Questions ...................... 130
125
126
Troubleshooting
Map, Voice, Entering Destinations
The Startup Confirmation screen is displayed every time I start the car.
Problem
The navigation system reboots by itself (returns to the opening screen).
How do I specify a destination when an entered city or street could not be found?
How do I delete saved places?
I cannot hear the navigation system voice.
Solution
This is normal. The Startup Confirmation screen reminds you and your guest drivers to always operate the navigation system in a safe manner. The Startup
Confirmation screen goes off after a certain period of time, even if you do not select OK .
A reboot can be caused by extreme temperatures or shock from bumpy roads, and does not necessarily indicate a problem. If this happens frequently, please see your dealer.
Try selecting the destination directly from the map.
2
1.
Select > > Saved > > Delete Saved Places .
2.
Select saved places you want to delete.
3.
Select Delete .
4.
Select Yes .
1.
Select and then select the (Back) icon. Select Settings > Navigation and enable Voice Prompt .
2.
Press the (Home) icon. Select Settings > System > Sound/Beep tab.
Turn up Guidance Volume , if guidance volume is low.
For more details, see the Owner’s Manual.
uu Troubleshooting u Traffic
Traffic
Problem
Traffic information is missing or is not displaying properly. What is wrong?
Solution
Verify the following:
● Traffic information relies on a clear signal. If signal strength is low, traffic data
● may not be available.
Check that the traffic icons are turned on.
●
●
●
2
It is possible that there is a temporary technical problem with your metropolitan area traffic provider. You can call Honda Automobile Customer Service to see if there is an outage.
2
Honda Automobile Customer Service Contact Information P. 134
If the situation persists, see your Honda dealer for assistance.
Traffic information is available only in certain areas.
127
128 uu Troubleshooting u Guidance, Routing
Guidance, Routing
Problem Solution
The navigation system does not route me the same way I would go or the same way as other mapping systems.
The navigation system attempts to generate the optimal route. You can change the route preferences used when calculating a route.
2
Recalculate Using Another Route Preference P. 107
The street I’m on is not shown on the map screen. The mapping database is constantly undergoing revision.
The vehicle position icon is not following the road. ● Check that the GPS antenna (located in the dashboard) is not blocked. For best reception, remove items from the dashboard, such as radar detectors, cellular
● phones, or loose articles.
Metallic tinting or other aftermarket devices can interfere with GPS reception.
Please consult your dealer.
2
How do I stop the map from rotating as I drive along?
1.
Select and then press the (Back) icon.
2.
Select Settings > Map & Vehicle > Driving Map View .
3.
Check that Driving Map View is set to Track Up or 3-D .
4.
Select North Up and then select Save .
The “Arrival time” display sometimes increases even though I am getting closer to my destination.
My elevation (shown when I display the current position) seems to fluctuate even though my elevation has not changed.
My elevation is missing on the “current position” screen.
The “Arrival time” is based on the speed limit on each road. Depending on the traffic conditions, the “Arrival time” may be calculated to be earlier or later.
This is normal. The elevation can vary ±100 ft (30 m) due to GPS calculation errors.
2
The elevation is only displayed if the GPS antenna can receive signals from at least four satellites. Try moving the vehicle into an open area. The elevation is also not displayed if the calculated elevation is zero or below sea level.
uu Troubleshooting u Update, Coverage, Map Errors
Update, Coverage, Map Errors
Problem
My city is not part of a fully verified detailed coverage area.
Does the navigation system work outside North
America?
Solution
The mapping database is constantly undergoing revision.
The system contains maps for the United States of America, Canada, Mexico,
Puerto Rico, US Virgin islands, Cayman Islands, Bahamas, French Guyana,
Guadeloupe, Martinique, Saint Barthelemy, and Jamaica. The navigation system will not work in other countries.
2
Display, Accessories
Problem
The display appears dim when starting the car in really cold weather.
Solution
This is normal. The display will become brighter after a few minutes.
129
130 uu Troubleshooting u Miscellaneous Questions
Miscellaneous Questions
Problem
My clock frequently changes forward and backward by one hour.
How do I change the interface language?
Solution
The clock setting is automatically updated based on your GPS location. If you are driving near a time zone border, the automatic update likely is the reason.
Press the (Home) icon and then select Settings > System > Others tab >
Language .
Select the desired language for system language.
For more information, see the Owner's Manual.
Reference Information
System Limitations ................................132
GPS ......................................................132
Address Calculation ..............................132
Database ..............................................132
Customer Assistance .............................134
Resolving Problems ...............................134
Obtaining a Navigation Update .............134
Honda Automobile Customer Service
Contact Information............................134
Visiting Your Dealer ..............................135
Map Coverage ......................................135
Traffic Information ................................135
Legal Information ................................. 136
User Agreement ................................... 136
131
132
System Limitations
GPS
The signals received from GPS satellites are extremely weak (less than a millionth of the strength of a local FM station) and require an unobstructed view of the sky. The GPS antenna is located in the dashboard. The signal reception can easily be interrupted or interfered with by the following:
• Metallic window tint on the front or side windows
• Cellular phones, PDAs, or other electronic devices docked in a cradle or lying loose on the dashboard
• Remote starters or “hidden” vehicle tracking systems mounted near the navigation unit
• Audio electronic devices mounted near the navigation unit
• Trees, tall buildings, highway overpasses, tunnels, or overhead electrical power wires
GPS is operated by the U.S. Department of
Defense. For security reasons, there are certain inaccuracies built into GPS for which the navigation system must constantly compensate. This can cause occasional positioning errors of up to several hundred feet (meters).
Database
The digitized map database reflects conditions as they existed at various points in time before production. Accordingly, your database may contain inaccurate or incomplete data or information due to the passage of time, road construction, changing conditions, or other causes.
Address Calculation
The destination icon shows only the approximate location of a destination address. This occurs if the number of possible addresses is different from the number of actual addresses on a block. For example, the address 1425 on a 1400 block with 100 possible addresses (because it is followed by the 1500 block) will be shown a quarter of the way down the block by the system. If there are only 25 actual addresses on the block, the actual location of address
1425 would be at the end of the block.
For example, some places/landmarks may be missing when you search the database because the name was misspelled, the place was improperly categorized, or a place/ landmark is not yet in the database. This is also true for police stations, hospitals, and other public institutions. Do not rely on the navigation system if you need law enforcement or hospital services. Always check with local information sources.
The database does not include, analyze, process, consider, or reflect any of the following categories of information:
• Neighborhood quality or safety
• Population density
• Availability or proximity of law enforcement
• Emergency, rescue, medical, or other assistance
• Construction work, zones, or hazards
• Road and lane closures
• Legal restrictions (such as vehicular type, weight, load, height, and speed restrictions)
• Road slope or grade
• Bridge height, width, weight, or other limits
• Traffic facilities safety
• Special events
• Pavement characteristics or conditions
We assume no liability for any incident that may result from an error in the program, or from changed conditions not noted above.
Every effort has been made to verify that the database is accurate. The number of inaccuracies you experience increases the longer you go without obtaining an updated map database.
2
Obtaining a Navigation Update P. 134
uu System Limitations u Database
133
134
Customer Assistance
Resolving Problems
If you run into a specific issue that you cannot resolve, consult the following help resources:
• For navigation system issues:
2
Or, please contact your dealer.
• For traffic-related issues:
2
• For reporting issues with the database or places/landmarks:
• Visit https://my.garmin.com/mapErrors/ report.faces?utm_source=garmin&ut m_medium=webpage&utm_content= support&utm_campaign=errorreport
• Or call Garmin OEM support directly at
(855) 607-2536.
Obtaining a Navigation
Update
Honda is continuously updating the navigation system and new software is usually made available on an annual basis.
For information on navigation updates for your vehicle, please visit:
• U.S.: www.hondanavi.com
• Canada: www.honda.ca
Honda Automobile
Customer Service Contact
Information
Honda Navi
American Honda Motor Co., Inc.
You can also contact your Honda dealer for further information regarding the update program available for your vehicle.
Honda Automobile Customer Service
Mail Stop 500-2N-7A
1919 Torrance Blvd.
Torrance, CA 90501-2746
Tel: (800) 999-1009
Fax: (310) 783-3023
Honda Canada Inc.
Honda Customer Relations
180 Honda Blvd.
Markham, ON
L6C 0H9
Tel: (888)-9-HONDA-9
Hours: 8:00 am to 7:30 pm Mon to Fri (EST)
Visiting Your Dealer
If you have a question that you cannot resolve using the available help resources, you can consult your dealer. Please identify the specific issue (e.g., error occurs when you enter a specific address, when driving on a certain road, or just when it’s cold) so that the service advisor can refer the issue to the factory so that a solution can be found.
Be patient, the service advisor may be unfamiliar with your specific issue.
Map Coverage
The system provides maps for the United
States of America, Canada, Mexico, Puerto
Rico, US Virgin islands, Cayman Islands,
Bahamas, French Guyana, Guadeloupe,
Martinique, Saint Barthelemy, and Jamaica.
The navigation system will not work in other countries.
Traffic Information
Continuously updated traffic information is available in major metropolitan areas across contiguous United States and some cities in
Canada.
uu Customer Assistance u Visiting Your Dealer
135
Legal Information
136
User Agreement
■
END USER TERMS
The content provided (“Data”) is licensed, not sold. By opening this package, or installing, copying, or otherwise using the
Data, you agree to be bound by the terms of this agreement. If you do not agree to the terms of this agreement, you are not permitted to install, copy, use, resell or transfer the Data. If you wish to reject the terms of this agreement, and have not installed, copied, or used the Data, you must contact your retailer or HERE North
America, LLC (as defined below) within thirty (30) days of purchase for a refund of your purchase price. To contact HERE, please visit www.here.com
.
The Data is provided for your personal, internal use only and may not be resold. It is protected by copyright, and is subject to the following terms (this “End User License
Agreement”) and conditions which are agreed to by you, on the one hand, and
HERE and its licensors (including their licensors and suppliers) on the other hand.
For purposes of these terms, “HERE” shall mean (a) HERE North America, LLC with respect to Data for the Americas and/or the
Asia Pacific region and (b) HERE Europe B.V. for Data for Europe, the Middle East and/or
Africa.
The Data includes certain information and related content provided under license to
HERE from third parties and is subject to the applicable supplier terms and copyright notices set forth at the following URL: http://corporate.navteq.com/ supplier_terms.html.
License Limitations on Transfer: Your limited license does not allow transfer or resale of the Data, except on the condition that you may transfer the Data and all accompanying materials on a permanent basis if: (a) you retain no copies of the Data;
(b) the recipient agrees to the terms of this
End User License Agreement; and (c) you transfer the Data in the exact same form as you purchased it by physically transferring the original media (e.g., the CD-ROM or
DVD you purchased), all original packaging, all Manuals and other documentation.
Specifically, Multidisc sets may only be transferred or sold as a complete set as provided to you and not as a subset thereof.
■
TERMS AND CONDITIONS
License Limitations on Use: You agree that your license to use this Data is limited to and conditioned on use for solely personal, noncommercial purposes, and not for service bureau, timesharing or other similar purposes. Except as otherwise set forth herein, you agree not to otherwise reproduce, copy, modify, decompile, disassemble or reverse engineer any portion of this Data, and may not transfer or distribute it in any form, for any purpose, except to the extent permitted by mandatory laws.
Additional License Limitations: Except where you have been specifically licensed to do so by HERE in a separate written agreement, and without limiting the preceding paragraph, your license is conditioned on use of the Data as prescribed in this agreement, and you may not (a) use this Data with any products, systems, or applications installed or otherwise connected to or in communication with vehicles capable of vehicle navigation, positioning, dispatch,
uu Legal Information u User Agreement real time route guidance, fleet management or similar applications; or (b) with, or in communication with, including without limitation, cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or PDAs.
Warning: This Data may contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic Data, any of which may lead to incorrect results.
Disclaimer of Warranty: HERE AND ITS
LICENSORS (INCLUDING THEIR LICENSORS
AND SUPPLIERS) DISCLAIM ANY
WARRANTIES, EXPRESS OR IMPLIED, OF
QUALITY, PERFORMANCE,
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR NON-
INFRINGEMENT. Some States, Territories and Countries do not allow certain warranty exclusions, so to that extent the above exclusion may not apply to you.
No Warranty: This Data is provided to you
“as is”, and you agree to use it at your own risk. HERE and its licensors (and their licensors and suppliers) make no guarantees, representations or warranties of any kind, express or implied, arising by law or otherwise, including but not limited to, content, quality, accuracy, completeness, effectiveness, reliability, fitness for a particular purpose, usefulness, use or results to be obtained from this Data, or that the Data or server will be uninterrupted or error free.
Disclaimer of Liability: HERE AND ITS
LICENSORS (INCLUDING THEIR LICENSORS
AND SUPPLIERS) SHALL NOT BE LIABLE TO
YOU IN RESPECT OF ANY CLAIM, DEMAND
OR ACTION, IRRESPECTIVE OF THE NATURE
OF THE CAUSE OF THE CLAIM, DEMAND
OR ACTION ALLEGING ANY LOSS, INJURY
OR DAMAGES, DIRECT OR INDIRECT,
WHICH MAY RESULT FROM THE USE OR
POSSESSION OF THIS DATA; OR FOR ANY
LOSS OF PROFIT, REVENUE, CONTRACTS
OR SAVINGS, OR ANY OTHER DIRECT,
INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT
OF YOUR USE OF OR INABILITY TO USE THIS
DATA, ANY DEFECT IN THIS DATA, OR THE
BREACH OF THESE TERMS OR
CONDITIONS, WHETHER IN AN ACTION IN
CONTRACT OR TORT OR BASED ON A
WARRANTY, EVEN IF HERE OR ITS
LICENSORS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. Some
States, Territories and Countries do not allow certain liability exclusions or damages limitations, so to that extent the above may not apply to you.
Export Control: You agree not to export from anywhere any part of the Data or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export laws, rules and regulations, including but not limited to the laws, rules and regulations administered by the Office of Foreign Assets
Control of the U.S. Department of
Commerce and the Bureau of Industry and
Security of the U.S. Department of
Commerce. To the extent that any such export laws, rules or regulations prohibit
HERE from complying with any of its obligations hereunder to deliver or distribute Data, such failure shall be excused and shall not constitute a breach of this
Agreement.
Continued 137
uu Legal Information u User Agreement
138
Entire Agreement: These terms and conditions constitute the entire agreement between HERE (and its licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof, and supersedes in their entirety any and all written or oral agreements previously existing between us with respect to such subject matter.
(“Claims”), you agree to submit to the personal jurisdiction of (a) the State of
Illinois for Claims related to Data for the
Americas and/or the Asia Pacific region provided to you hereunder, and (b) The
Netherlands for Data for Europe, the Middle
East and/or Africa provided to you hereunder.
Severability: You and HERE agree that if any portion of this agreement is found illegal or unenforceable, that portion shall be severed and the remainder of the
Agreement shall be given full force and effect.
Governing Law: The above terms and conditions shall be governed by the laws of the State of Illinois (for Data for the
Americas and/or the Asia Pacific region) or
The Netherlands (for Data for Europe, the
Middle East and Africa), without giving effect to (i) its conflict of laws provisions, or
(ii) the United Nations Convention for
Contracts for the International Sale of
Goods, which is explicitly excluded. For any and all disputes, claims and actions arising from or in connection with the Data
Government End Users: If the Data is being acquired by or on behalf of the
United States government or any other entity seeking or applying rights similar to those customarily claimed by the United
States government, this Data is a
“commercial item” as that term is defined at 48 C.F.R. (“FAR”) 2.101, is licensed in accordance with this End User License
Agreement, and each copy of Data delivered or otherwise furnished shall be marked and embedded as appropriate with the following “Notice of Use”, and be treated in accordance with such Notice:
NOTICE OF USE
CONTRACTOR (MANUFACTURER/
SUPPLIER) NAME:
HERE
CONTRACTOR (MANUFACTURER/
SUPPLIER) ADDRESS:
425 West Randolph Street, Chicago, IL
60606.
This Data is a commercial item as defined in
FAR 2.101 and is subject to the End User
License Agreement under which this Data was provided.
© 1987-2013 HERE. All rights reserved.
If the Contracting Officer, federal government agency, or any federal official refuses to use the legend provided herein, the Contracting Officer, federal government agency, or any federal official must notify HERE prior to seeking additional or alternative rights in the Data.
© 1987-2013 HERE. All rights reserved.
Voice Commands
Voice Commands .................................. 140
Navigation Commands ......................... 140
List of Categories .................................. 142
139
Voice Commands
140
Navigation Commands
The system accepts these commands on a map/guidance screen.
■
Voice Portal Commands
Navigation
■
Navigation Commands
View Map
Go Home
Find Place
Find Address
Find Category
Find City
Find Intersection
Saved Places
Recently Found
Stop Route
Detour
■
Other Commands
Back
Page Up
Page Down
Exit
Yes
No
Navigate
Main Menu
Start New Route
Add to Active Route
View List
Change Country
Along Route
Near Destination
Near Current Location
View Categories
■
Line Number Commands
3
4
1
2
5
■
Category Commands
Restaurants
Everyday Life
Banks & ATMs
Rest Areas
Attractions
Medical Care
Shopping
Gas Station s
Parking
Art & Entertainment
Recreation
Transit
Lodging
■
Sub Category Commands
All Restaurants
Browse By Style
Barbecue
Coffee and Tea
Delis
Donuts and Baked Goods
Fast Food
Fish and Seafood
Grills
Pizza
Steakhouses
Wine, Beer, and Liquor
All Everyday Life
Auto Services
Car Washes
Colleges and Universities
Community Services
Convenience Store
Fitness and Gyms
Laundry Services
Libraries
Places of Worship
Post Offices
Schools
Veterinary Clinics
All Attractions
Major Attractions
Amusement Parks
Event Centers
Historical Landmarks
Museums and Galleries
Offbeat Places
Parks and Gardens
Tourist Information
Wineries and Breweries
Zoos and Aquariums
All Medical Care
Hospitals
Doctor Offices
Pharmacies
All Shopping
Books, Music, and Movies
Clothing and Accessories
Computers and Electronics
Convenience Store
Department Stores
Florists and Gifts
Grocery Stores
Home and Garden
Housewares
Office Supply and Shipping
Pharmacies
Shopping Centers
Sporting Goods
Wine, Beer, and Liquor
All Art & Entertainment
Bars and Pubs
Casinos
Movie Theaters
Museums and Galleries
Nightclubs
Performing Arts uu Voice Commands u Navigation Commands
All Recreation
Amusement Parks
Bowling Center
Camps and Retreats
Golfing
Skiing and Winter Sports
Sport Centers
Stadiums and Tracks
All Transit
Airports
Bus Stations
Car Rental
Ferry Terminals
Transit Service
Truck Stops
Train Stations
Travel Agents
All Lodging
Bed and Breakfast or Inn
Campground or RV Park
Hotel or Motel
141
142
List of Categories
Barbecue
Coffee and Tea
Delis
Restaurants
Fish and Seafood
Grills
Pizza
Donuts and Baked Goods Steakhouses
Auto Services
Car Washes
Everyday Life
Laundry Services
Libraries
Colleges and Universities Places of Worship
Community Services Post Offices
Fast Food Wine, Beer, and Liquor Convenience Store
Shopping Fitness and Gyms
Books, Music, and Movies Home and Garden
Schools
Veterinary Clinics
Art & Entertainment
Clothing and Accessories Housewares Bars and Pubs
Computers and Electronics Office Supply and Shipping Casinos
Museums and Galleries
Nightclubs
Convenience Store
Department Stores
Florists and Gifts
Grocery Stores
Pharmacies
Shopping Centers
Sporting Goods
Movie Theaters
Amusement Parks
Performing Arts
Attractions
Parks and Gardens
Wine, Beer, and Liquor Event Centers
Lodging Historical Landmarks
Bed and Breakfast or Inn Hotel or Motel
Campground or RV Park
Museums and Galleries
Offbeat Places
Tourist Information
Wineries and Breweries
Zoos and Aquariums
Amusement Parks
Bowling Center
Camps and Retreats
Golfing
Recreation
Skiing and Winter Sports
Sports Centers
Stadiums and Tracks
Doctor Offices
Hospitals
Medical Care
Pharmacies
Airports
Bus Stations
Car Rental
Ferry Terminals
Transit
Train Stations
Transit Service
Travel Agents
Truck Stops
Gas Stations
Banks & ATMs
Parking
Rest Areas
Index
Index
Symbols a
(Display Mode) Button ............. 3, 7, 26
d
(Talk) Button
.............................. 5, 11, 17
Detour
......................................................... 92
Device .......................................................... 50
Display Mode Settings ................................ 26
Driving to Your Destination ...................... 77
HOME Screen
................................................ 3
Honda Customer Service
.......................... 134
Numbers
3D Map ....................................................... 30
A
Adding Waypoints
..................................... 94
Apps Menu
............................................... 110
Avoidances ................................................. 38
E ecoChallenge
............................................ 116
ecoRoute TM
................................................ 111
Editing the Destination List
Entering a Destination
............................... 54
Address ..................................................... 61
Categories ................................................. 66
HONDA ..................................................... 60
Map Input ................................................. 73
Recent....................................................... 72
Saved ........................................................ 72
Entering a New Destination ...................... 98
C
Calculating the Route ................................ 74
Calculation Mode ....................................... 37
Calculator ................................................. 121
Cancel Route
.............................................. 10
Categories
List of Categories .................................... 142
Changing Your Destination
Changing Your Route ................................ 91
Custom Avoidances .................................... 39
Customer Assistance ................................ 134
F
Fuel Economy .................................... 115, 117
G
Go Home
....................................................... 8
GPS Information ....................................... 123
D
Dashboards
................................................. 34
Data Reset .................................................. 52
H
Help ..................................................... 10, 119
Home Location
........................................... 18
I
Information Functions ............................. 119
L
Language & Keyboard
............................... 47
Legal Information
.................................... 136
M
Map & Vehicle ............................................ 28
Map Buttons ............................................... 33
Map Coverage .......................................... 135
Map Detail
.................................................. 31
Map Layers
.................................................. 34
Map Legend
.................................................. 6
Map Menu
.................................................. 82
Map Operation
........................................... 81
Map Screen ................................................. 77
Icon............................................................. 6
Map Theme
................................................. 32
Map Update
Obtaining Update Data ........................... 134
Map view
.................................................... 30
Mileage Report ......................................... 118
myMaps
....................................................... 35
143
144
N
Navigation ................................................... 36
Navigation Top Screen ................................. 3
North Up ..................................................... 30
O
Other Settings ............................................. 46
T
Track Up ...................................................... 30
Traffic
Indicator...................................................... 6
Setting ...................................................... 45
Traffic Information .................................... 86
................................. 12, 126
P
Personal Information .................................. 18
U
Unit Converter
.......................................... 122
Units ............................................................ 46
Update System Software
Obtaining Update Data ........................... 134
S
Saved Locations .......................................... 19
Deleting............................................... 24, 25
Editing....................................................... 22
Saving ....................................................... 19
Setting
Data Reset ................................................. 52
Device ....................................................... 50
Display Mode Settings ............................... 26
Language & Keyboard ............................... 47
Map & Vehicle ........................................... 28
Navigation ................................................. 36
Other Settings ........................................... 46
Personal Information.................................. 18
Traffic........................................................ 45
Start-up ....................................................... 16
Stopping the Route .................................... 91
System Limitations
.................................... 132
V
Vehicle
........................................................ 29
Vehicle Profile
.................................. 112, 114
Voice Commands
Basic Operation ........................................... 5
Voice Commands List .............................. 140
Voice Control System ................................ 17
Voice Control Operation ............................ 11
Voice Recognition ...................................... 17
W
Where I’ve Been ....................................... 120
31TGG800
NV0
5
6
79
00X31-TGG-800
1
owners.honda.com
(U.S.)
myhonda.ca
(Canada)
2017 Honda Civic Hatch Navigation Manual
©2017 Honda Motor Co., Ltd. — All Rights Reserved Printed in U.S.A
advertisement
Related manuals
advertisement
Table of contents
- 3 Contents
- 4 Quick Reference Guide
- 4 Overview—Functions at a Glance
- 5 HOME Screen
- 6 Touchscreen Operation
- 7 How to Enter Information
- 8 Map Screen Legend
- 9 During Route Guidance
- 10 Navigation—Home Addresses and Going Home
- 11 Navigation—Entering a Destination
- 12 Navigation—Changing Route or Destination
- 12 Help
- 13 Voice Control Operation
- 14 Troubleshooting
- 15 How to Use This Manual
- 17 System Setup
- 55 Navigation
- 111 Other Features
- 127 Troubleshooting
- 133 Reference Information
- 141 Voice Commands
- 145 Index