Honda Odyssey 2015 Owner Manual 325 Pages
Honda Odyssey is equipped with an advanced navigation system that includes features like voice control, destination search by address or point of interest, route guidance with turn-by-turn instructions, and traffic rerouting. You can store your home address, contacts, and avoid specific areas. The system also includes a multi-view rear camera for safer reversing.
advertisement
The information and specifications included in this publication were in effect at the time of approval for printing. Honda Motor Co., Ltd., reserves the right, however, to discontinue or change specifications or design at any time without notice and without incurring any obligation.
Accessories Precautions
The GPS antenna is located in the dashboard. Metallic front or side window tinting can seriously degrade or obstruct GPS reception.
Signal noise from devices such as radar detectors, vehicle tracking devices, remote starters, and additional amplifiers can disrupt the navigation system. If you install any such item, install it away from the navigation display and antenna.
Important Safety Information
WARNING
Using the navigation system while driving can take your attention away from the road, causing a crash in which you could be seriously injured or killed.
Only operate system controls when the conditions permit you to safely do so.
Avoid focusing on the screen or manually operating the system controls while driving.
Enter information before you begin driving or when stopped. As you drive, listen to the audible instructions and use voice commands when possible. Pull to the side of the road if you need more time to look at the screen or operate the controls.
Route guidance may conflict with street closures, road construction, detours, and out-of-date map data.
The system itself may also have limitations. Verify route information by carefully observing roads, signs, and signals. Always use your own judgment and obey traffic laws.
00X31-TK8-8400 ANV51431
Driving to Your Destination 108
2 Bluetooth ® HandsFreeLink® P. 201
Bluetooth ® HandsFreeLink® 202
Playing Hard Disc Drive (HDD) Audio 163
2 Rear Entertainment System P. 243
Rear Control Panel Operation 248
Front Control Panel Operation 259
2 Reference Information P. 289
Contents
2
Overview—Functions at a Glance
Navigation
You can select any place/landmark as a destination by using voice control or the Interface Dial. The navigation system gives you turn-by-turn driving directions to your destination.
Store home address
Register
1
home address.
Store contacts
Store up to
200
contacts in an address book.
Enter destination
Select your destination using
12
methods.
Select route
Set route preferences and select one of
3
routes.
Track route
Follow your route in real-time with voice guidance.
Avoid certain areas
Set streets and areas to detour around.
Add waypoints
Add up to
4
“pit stops” along your route.
Audio
The advanced audio system provides clear, well-defined sound and makes the most of your music.
Enjoy listening to a variety of audio sources, such as:
FM/AM Radio
SiriusXM® Radio
Compact Disc
Hard Disk Drive (HDD)
iPod®
Internet Radio
USB Flash Drive
Bluetooth ® Audio
Rear Entertainment System
Rear seat passengers can enjoy a completely separate entertainment source than front passengers, including movies, games, and other audio choices.
Voice Control
Use voice commands for safer system control while driving. You can operate all key functions of the navigation, audio, Bluetooth ® HandsFreeLink®, and climate control systems.
Bluetooth ® HandsFreeLink®
Pair a compatible cell phone to receive incoming and make outgoing calls. You can operate the phone features without ever taking your hands off the wheel.
Other Features
Multi-view Rear Camera
Helps you check for obstacles around the rear of your vehicle on the navigation screen when reversing.
3
4
System Controls
Navigation Screen
1
PHONE Button
2
NAV Button
3
BACK Button
4 a
(Display Mode)
Button
5
Interface Dial/ENTER
Button
6
INFO Button
7
MENU Button
8
SETTINGS Button
Models with RES
9
FRONT AUDIO Button
0
REAR AUDIO Button
lb
REAR
9
(Power) Button
Navigation
Rear Entertainment System
Bluetooth ® HandsFreeLink ®
Voice Control
Audio
FRONT
A
REAR
AU
Touchscreen lc
Microphone
ld
MODE Button
le
VOL Button
lf
CH Button
lg h
(Pick-Up) Button
lh J
(Hang-Up/
Back) Button
li d
(Talk) Button
Models without RES lj
AUDIO Button
Voice Control Operation
Voice Portal Screen
a Press and release the d
(Talk) button on the top screen of any mode.
The system prompts you to say a voice command and gives examples. Press and release the d
(Talk) button again to bypass this prompt.
The system beeps when ready for a command. Press the
J
(Hang-Up/
Back) button to cancel.
Available voice commands are highlighted on the screen.
b Say a voice command (e.g., Address).
After that, follow the voice prompt and say a voice command.
The audio system is muted during voice control mode.
You can use other voice commands on the Voice Portal screen. Voice Command
Say d
“Voice Help” to enter supported commands for the current screen. A
voice help tutorial is also available. Voice
During the voice control mode, press and hold the
J
(Hang-Up/Back) button to return to the Voice Portal screen.
Set Voice Prompt to Off to bypass the
voice prompt. Voice Recognition
Carefully read the usage note for the voice control.
On the Menu Screen
a Press and release the d
(Talk) button on the menu or setting screen.
The system prompts you to say a voice command and gives examples. Press and release the d
(Talk) button again to bypass this prompt.
Available voice commands are highlighted on the screen.
b Say a voice command.
Say d
“Voice portal” to display the
Voice Portal on any screen.
Say d
“Voice Help” to enter supported commands for the current screen. A voice help tutorial is also available.
5
Touchscreen Basic Operation
Shortcuts
Shortcut icons
Audio Source
Select to change an audio source.
More
Select to display the menu items.
6
Source List Icons
Presets
Select to store a station.
To listen to a stored station, select 1-6 (AM) or 1-12 (FM).
Menu Items
AM, FM, SiriusXM®, Pandora® , Aha
TM bn
: Select the preset station (AM/FM/Pandora®/Aha TM ) or category (SiriusXM®). cx : Select to search the selected band for a station with a strong signal. (AM/FM)
Select the channel. In channel mode, select and hold to change the channel rapidly. (SiriusXM®)
Select a song (Pandora®) or a contents (Aha
TM
).
CD, HDD, USB flash drive, Bluetooth ® Audio bn
: Select n
to skip to the next folder, and b
to skip to the beginnig of the previous folder.
cx
: Select to change tracks. Select and hold to move rapidly within a track.
iPod®
Album bar : Select an album. cx
: Select to change tracks. Select and hold to move rapidly within a track.
Interface Dial/ENTER Button Operation
Rotate dial
i
Changes scale
Map screens
You will see these icons in each chapter.
They represent how you can operate the Interface Dial.
Press ENTER
Press ENTER
u
Selects function
Selects map icon
Map screens Rotate dial
Highlights menu options
Menu screens
Move up Move left Move down Move right
Move
e
up
r
down
w
left
y
right
Scrolls map
(8 directions)
Map screens
Selects labeled function
Menu screens
Selecting Icon
Selects highlighted option
Menu screens
7
How to Enter Information
You can enter information (e.g., city names, street names, personal names, and business names comprising letters, numbers, and symbols) when prompted on input screens by two different methods.
Using Voice Control
When you see d
in this manual, voice commands are available for that feature.
Say the letter, number, or symbol (e.g., say d
“A” ).
Use spelling assist (e.g., say d
“Alpha” to enter the letter “A” or d
“Hyphen” to enter a hyphen).
The system beeps if you say an unavailable (grayed out) letter or number.
If a voice command is not recognized, a list is displayed with possible options.
Using the Interface Dial
Rotate i
to highlight a character.
Select to display upper/lower case characters.
Select Sym to display symbols and accented characters.
Select Edit (or move e
) to edit the entered characters.
Press u
to enter the highlighted character.
Move y
to select Space to enter a space character.
Move w
to select Delete to remove the last entered character.
Number of Hits
8
On list screens:
Say the number of the list item (e.g., say d
“Five” to select item
5).
Say d
“Up” or d
“Previous” to scroll up one page.
Say d
“Down” or d
“Next” to scroll down one page.
On input search screens, the number of hits in the map database is displayed. Move r
to select OK to display a list of possible entries.
You can also use the touch screen to enter information.
Scrolling through lists or tabs is limited while the vehicle is moving.
Certain screen functions are limited or inoperable while the vehicle is moving. For these functions, use available voice commands or pull over to proceed.
Map Screen Legend
Current map scale
Map orientation
North up
Heading up
3D map
Traffic incident icons
Congestion
Incident
Weather
Construction
Road Closed
GPS signal strength
Best reception
Good reception
No icon: Poor/No reception
Feature areas
Park
Hospital
Shopping Mall
Golf Course
Airport/Business
Water Area
Cemetery
University
Traffic status indicator (P118)
Traffic information availabled
Traffic information off or map scale too large
No icon: Out of coverage area
Current vehicle position
Current street name
Traffic flow indicator
Heavy (approx.) surface: 0 to 20 mph freeway: 0 to 25 mph
Moderate (approx.) surface: 21 to 30 mph freeway: 25 to 52 mph
Streets
Freeways
State routes
Verified streets
Unverified streets
One-way streets
Acura dealer
Honda dealer
ATM
School
Parking lot
Parking garage
Grocery store
Hotel/Lodging
Gas station
Hospital
Post office
Restaurant
Freeway exit information
9
10
During Route Guidance
During route guidance, route information is displayed on the map screen and guidance screen.
Press the NAV button to toggle between the map and guidance screen.
Map Screen
Tracking dots
Guide to destination or waypoint
Estimated time to destination (waypoint)
Calculated route
Next guidance indicator
Distance to the next guidance point.
Calculated route
(unverified roads)
Map Menu
Contains map or routing options.
Distance to destination
(waypoint)
Distance of the actual route.
Destination icon
Guidance Screen
Guidance point
Guidance indicator
Street name of guidance point and distance to the guidance point.
Day or Night Mode
Press the a
(Display mode) button to manually switch between day and night mode.
Day mode Night mode
Guide to destination or waypoint Lane guidance
Estimated time to destination (waypoint)
Distance to destination
(waypoint)
Distance of the actual route.
Guidance point
No entry icon
Navigation—Home Addresses and Going Home
The “Home” feature automatically routes you to your home address from any location simply by selecting Go Home, or saying d
“Go
Home.”
Storing Your Home Address Going Home
e Enter a name.
a Press the SETTINGS button.
SETTINGS a From the map screen, press the MENU button.
MENU b Rotate i
to select Navi Settings .
Press u
.
b Rotate i
to select Go Home . Press u
.
f Rotate i
to select Address . Press u
.
g Enter an address.
h Rotate i
to select Phone No . Press u
.
i Enter a phone number.
c Rotate i
to select Edit Go Home .
Press u
.
d Rotate i
to select Name . Press u
.
Alternatively, you can say d
“Go
Home” from any screen. Your home address is displayed on the Calculate
Route screen.
c Rotate i
to select Set as
Destination . Press u
.
j Move r
and rotate i
to select OK .
Press u
.
11
12
Navigation—Entering a Destination
Enter your destination using one of several methods, then follow route guidance on the map or guidance screen to your destination. You can also perform these steps using d
voice commands.
a From the map screen, press the MENU button.
MENU e Rotate i
to select your destination street from the list. Press u
.
h Rotate i
to select Set as
Destination . Press u
.
Route guidance to the destination begins.
b Rotate i
to select Address . Press u
.
c Rotate i
to select Street . Press u
.
f Enter the street number. Move r
to select OK when finished.
View Routes : Choose one of three routes.
d Enter the name of your destination street.
g If there is more than one city with the specified street, a list of cities is displayed. Rotate i
to select the desired city from the list. Press u
.
Route Preference : Choose Max or Min for the five settings.
Navigation—Changing Route or Destination
You can alter your route by adding waypoints to visit, adding streets to avoid, or changing your destination during route guidance.
Adding a Waypoint
(“Pit Stop”)
You can add up to four waypoints along
a From the map screen, press the MENU button.
b Rotate i
to select Destination List .
Press u
.
c Rotate i
to select Add New
Destination . Press u
.
d Rotate i
to select Find Along Route .
Press u
.
e Rotate i
to select location and search method. Press u
.
Search Around : Search around a location.
Search Along : Search between two locations.
f Select the icon category and location to add to the Destination List when prompted. Edit the order of destinations if necessary.
g Move r
and rotate i
to select Start
Route . Press u
.
Changing Your
Destination
There are four methods you can use to specify a new destination during route guidance.
Say d
“Find Nearest…”
Searches for the nearest place/landmark on the map screen (e.g., d
“Find nearest gas station” ).
Say d
“Go Home”
Routes to your home address.
Selecting an icon on the map
Scroll the map to position the cursor over a place/landmark icon or a new area on the map. Press u
twice.
Entering a new destination
Press the MENU button. Move w
to select Destination and enter a new destination.
Canceling Your Route
a Press the MENU button.
b Rotate i
to select Cancel Route .
Press u
.
From the map screen:
a Press u
on the map screen.
b Rotate i
to select Cancel Route .
Press u
.
13
Rear Entertainment System
The rear passengers can enjoy a wide array of audio/visual sources with the Rear Entertainment System (RES). The rear passengers can use wireless headphones and operate the system with the rear control panel.
Overhead Screen and Rear Control Panel
RES
Select the audio source.
Basic Operation
a Open the overhead screen.
Press the buttons to select items.
b Press the REAR
9
(Power) button on the front control panel.
REAR
Pull down the bottom edge of the screen.
Press the Release button to remove the rear control panel.
Ultrawide RES Select the audio source.
c Select the audio source.
RES : Press the desired button on the rear control panel.
14
Press the Open button to open and pull down the screen.
Press the Release button to remove the rear control panel.
Rotate the Interface Dial to select items.
9
(Power) Button
Turn the system on or off
(when rear power is turned on).
(Light-up) Button
Illuminate the buttons on the rear control panel.
CH/FOLDER Bar
Select a channel (Radio) or a folder (Disc/USB).
TUNE/SKIP Bar
Find stations (FM/AM). Skip to start/end of tracks, or press and hold to fast reverse/fast forward (Disc/USB/DVD).
CATEGORY Bar
Select a category (SiriusXM®).
(Play/Pause) Button
Play or pause the playback.
TITLE SCROLL Bar
Display track title, artist, and other text information.
Ultrawide RES : Press the SOURCE button and rotate the Interface
Dial on the rear control panel to select an audio source. Press the
ENTER button.
Voice Help
This navigation system comes with voice help, which shows you what command to say when using the voice command functions.
Command Help
a Press and release the d
(Talk) button.
b Say d
“ Voice Help.” e Press and release the d
(Talk) button.
f Say one of the options for a list of available commands by category (e.g., d
“Route commands” ).
Getting Started Tutorial
a Move r
and rotate i
to select
Getting Started on the voice help screen. Press u
.
The voice help screen is displayed.
The d
“Voice Help” command is available on most screens.
c Press and release the d
(Talk) button.
d Say one of the options for a list of available commands by category (e.g., d
“Navi commands” ).
g The system displays a list of all available commands for the category.
Press u
to hear the list read aloud.
For “Voice Settings” and “All
Commands.”
b Press u
to have the system read the tips for the voice control.
Rotate i
to read the tips.
Move w
or y
to display the previous/ next page.
15
16
Troubleshooting
Why does the vehicle position icon on the map “lag” a short distance behind my actual position, especially at intersections?
This is normal. The navigation system is unaware of the width of intersections. Large differences in vehicle position can indicate a temporary loss of the GPS signal.
Why does the “time to destination” display sometimes increase even though I am getting closer to my destination?
The “time to destination” is based on your actual road speed and traffic conditions to give you a better estimate of arrival time.
How do I specify a destination when an entered city or street could not be found?
Try entering the street first. Some cities are lumped in with a major metro area. In rural “unverified” areas or new subdivisions, streets may be missing or only partially numbered.
For more Information
How do I turn on the navigation system voice guidance?
1.
Press the SETTINGS button. Rotate i
to select System
Settings and press u
. Check that Volume is not set to
0 .
2.
Move w
or y
to select Voice Rec.
Set Voice Prompt to On if you want the system to provide confirmations and system prompts.
My battery was disconnected or went dead, and the navigation system is asking for a code. Where do I find it?
In most cases, you do not need to enter a code. Simply press and hold the
9
(Power) button for two seconds; the system should reactivate.
2 System Initialization P. 290
How to Use This Manual
This section explains different methods on how you can easily find information in this manual.
Searching the Table of Contents
Two types of Tables of Contents help you find your desired information.
Content s
More Detaile d
Contents
Table of Contents
First, find the general chapter related to what you are looking for (e.g., entering a destination from the Address Book).
Then, go to that chapter to view a more specific table of contents.
Chapter Contents
This more detailed table of contents shows you exactly what information is listed by section and title.
Searching the Index
Menu items displayed on the navigation screen (e.g., Address Book) can be found individually in the Index.
Navigation Screen Index
The Index consists of main terms and sub-entries. The sub-entries help you get to the desired page depending on what you are looking for.
Go to the
Next Pa g e
17
After following the menu tree, step-by-step instructions explain how to achieve the desired result.
18
Menu Tree
The menu tree helps guide you through the system’s menu options.
To get to your desired function, follow the menu tree in order of the steps shown.
NOTE:
All menu options can also be activated with voice commands.
MENU button
Press the hard button on the system control panel.
Press the MENU button.
Sample pages and images in this section may differ from the actual ones.
Select the menu option with the
Interface Dial.
Rotate i
to select Address Book .
Press u
.
System Setup
This section describes the start-up procedure and the navigation and setup functions.
Start-up .............................................................. 20
Voice Control System ........................................ 22
Command Input .............................................. 22
Voice Recognition ............................................ 23
Interface Settings .............................................. 25
Personal Information ........................................ 36
Address Book................................................... 37
Home Address ................................................. 42
PIN Numbers .................................................... 43
Previous Destination......................................... 44
Category History .............................................. 45
Download POI.................................................. 46
Routing .............................................................. 49
Route Preference.............................................. 50
Unverified Routing ........................................... 51
Traffic Rerouting .............................................. 53
Edit POI Search Radius Along Route ................. 54
Avoided Area ................................................... 55
Guidance ............................................................ 57
Guidance Mode ............................................... 58
Street Name Guidance ..................................... 60
Non-map screens ............................................. 61
Guidance Point................................................. 63
Estimated Time................................................. 64
Map ..................................................................... 65
Showing Icons on Map..................................... 67
Color................................................................ 69
View (Map Orientation) .................................... 72
3D Angle Adjustment....................................... 73
Straight Line Guide........................................... 73
Current Location .............................................. 74
Map Legend..................................................... 75
Display Tracking ............................................... 79
Correct Vehicle Position.................................... 80
Data Reset .......................................................... 81
Defaulting All the Settings................................ 81
Touchscreen ....................................................... 82
Changing the Screen Settings .......................... 82
19
20
Start-up
The navigation system starts automatically when you set the power mode to
ACCESSORY or ON. At start-up, the following Confirmation screen is displayed.
1.
Press u
to select OK .
If you do not select OK , the map screen is displayed after a certain period of time.
Your current position is displayed on the map screen.
1 Start-up
If the navigation system loses power at any time, you may need to press and hold the
9
(Power) button for more than two seconds, or you may be prompted for the five-digit security code.
2 System Initialization P. 290
“OK” on the Confirmation screen cannot be selected by using a voice command.
2.
Press the NAV button if a different mode is selected.
Your current position is displayed on the map screen.
■
Limitations for Manual Operation
Disabled option
Certain manual functions are disabled or inoperable while the vehicle is in motion. You cannot select a grayedout option using the Interface Dial until the vehicle is stopped.
Voice commands are still operable while the vehicle is in motion.
Start-up
21
22
Voice Control System
Your vehicle has a voice control system that allows hands-free operation of most of the navigation system functions.
The voice control system uses the d
(Talk) and
J
(Hang-Up/Back) buttons on the steering wheel and a microphone near the map lights on the ceiling.
A “Getting Started” feature provides a tutorial that explains how to use the voice control system.
2 Getting Started Tutorial P. 15
Command Input
If the system does not understand a command or you wait too long to give a command, the system asks you to repeat the command.
When you give a command, the system generally either repeats the command as a confirmation or asks you for further information. If you do not wish to hear this feedback, you can turn it off. However, listening to the feedback will help familiarize you with the way the system expects commands to be phrased.
If the system cannot perform a command or the command is not appropriate for the screen you are on, the system beeps.
On character input screens, a list of possible characters is displayed if the system does not recognize your command.
You can find out which voice commands are available for a particular screen using the d
“Voice Help” command. The system will display and read the list of available commands to you.
1 d
(Talk) Button
When you press the d
(Talk) button, the system prompts you to say a voice command and gives examples. Press and release the d
(Talk) button again to bypass this prompt and give a command.
1 Command Input
The audio system is muted while using the voice control system.
Voice Control System Voice Recognition
Voice Recognition
To achieve optimum voice recognition when using the navigation voice control system:
• Make sure the correct screen is displayed for the voice command that you are using.
• Close the windows and moonroof.
• Adjust the dashboard and side vents so air does not blow onto the microphone on the ceiling.
• Speak clearly in a clear, natural speaking voice without pausing between words.
• Reduce any background noise if possible. The system may misinterpret your command if more than one person is speaking at the same time.
• Refer to the Voice Help feature.
1 Voice Recognition
The voice control system can only be used from the driver’s seat because the microphone unit removes noises from the front passenger’s side.
23
Voice Control System Voice Recognition Settings
Voice Recognition Settings
H
SETTINGS button System Settings Voice Rec
Rotate i
to select an item. Press u
.
24
The following items are available:
• Volume : Adjusts the voice prompt volume level.
• Voice Prompt : Turns the voice prompt on or off.
On (factory default): Provides the voice prompts.
Off : Disable the feature.
• Song by Voice : Turns the Song By Voice TM on or off.
2 Song By Voice TM (SBV) P. 182
• Song by Voice Phonetic Modification : Modifies a voice command of music stored in the HDD or an iPod®.
2 Phonetic Modification P. 184
• Phonebook Phonetic Modification : Modifies a voice command for the phonebook.
2 Phonebook Phonetic Modification P. 214
Interface Settings
Display Settings
H
SETTINGS button System Settings Display
Adjusts the screen’s preferences.
1.
Rotate i
to select an item. Press u
.
2.
Rotate i
to make the adjustment. Press u
.
1 Display Settings
You can set separate daytime and nighttime settings for Brightness , Contrast , and Black
Level . Adjust each setting when the display is in either daytime or nighttime mode.
The following items are available:
• Brightness: Adjusts the screen’s brightness.
• Contrast: Adjusts the screen’s contrast.
• Black Level: Adjusts the screen’s black level.
25
Interface Settings Sound and Beep Settings
Sound and Beep Settings
H
SETTINGS button System Settings Sound/Beep
Changes the system sound and beep settings.
Rotate i
to select an item. Press u
.
1 Sound and Beep Settings
Volume
If you set Volume to 0 , you will not hear route guidance or voice command confirmations.
If you then select Voice in the Map Menu, you will hear route guidance at the default volume.
26
The following items are available:
• Volume : Adjusts the navigation system volume level.
• Interface Dial Feedback : Sets if and when the system reads aloud a selection made using the Interface Dial.
On : Always reads the selection.
Off : Disables the feature.
Auto (factory default): Reads the selection only when the vehicle is moving.
• Message Auto Reading : Selects whether the system automatically reads out messages, and, if selected, whether only when driving.
On : Always reads the message.
Off : Disables the feature.
Auto (factory default): Reads the message only when the vehicle is moving.
• Verbal Reminder : Turns the verbal reminders on and off.
On : Sets the verbal reminders.
Off : Disables the feature.
Interface Settings Clock Adjustment
Clock Adjustment
H
SETTINGS button System Settings Clock
Set the automatic adjustment of the system clock for daylight saving and international time zones.
Rotate i
to select an item. Press u
.
1 Clock Adjustment
Auto Time Zone
If you live and work in two different time zones, you may want to turn Auto Time Zone to OFF .
When driving near a time zone boundary, the displayed time zone may fluctuate between the two zone times.
Auto Daylight
This function is not activated in areas that have not adopted daylight saving time, even if you have set Auto Daylight to ON .
You can turn the clock display in the navigation screen on and off.
The following items are available:
• Clock/Wallpaper Type : Changes the clock display type and the wallpaper type.
2 Setting the Clock Type P. 28
• Clock Adjustment : Adjust the current time manually.
• Clock Format : Sets the time notation to either 12-hour clock (12H, factory default) or 24-hour clock (24H).
• Auto Time Zone : The navigation system automatically adjusts the clock when driving through different time zones.
On (factory default): Adjusts the clock automatically.
Off : Disables the feature.
• Auto Daylight : The navigation system automatically adjusts the clock (“spring ahead” or “fall back” by one hour) when a daylight saving time change occurs.
On (factory default): Adjusts the clock automatically.
Off : Disables the feature.
• Clock Reset : Resets the settings of all items in the Clock group.
27
28
Interface Settings Clock Adjustment
■
Setting the Clock Type
H
SETTINGS button System Settings Clock Clock/Wallpaper Type
Clock
1.
Rotate i
to select an option to change the design. Press u
.
2.
Move r to select OK . Press u
.
■
Setting the Clock
H
SETTINGS button System Settings Clock Clock Adjustment
1.
Rotate i
to select an item. Press u
.
2.
Rotate i
to select a minute. Press u
.
Interface Settings Wallpaper Settings
Wallpaper Settings
Select, delete, and import wallpaper pictures for display on the screen.
■
Import wallpaper
H
SETTINGS button
System Settings
Clock
Clock/Wallpaper Type
1.
Connect the USB flash drive to the
USB port.
2.
Move y
to select Wallpaper .
The screen will change to the wallpaper list.
3.
Move r and rotate i
to select
Add New Wallpaper . Press u
.
4.
Rotate i to select a desired picture. Press u
.
The preview is displayed on the left side on the screen.
5.
Move r and rotate i
to select
Start Import . Press u .
The confirmation message will appear. Then the display will return to the wallpaper list.
1 Wallpaper Settings
• When importing wallpaper files, the image must be in the USB flash drive’s root directory.
Images in a folder cannot be imported.
• The file name must be fewer than 210 bytes.
• The file format of the image that can be imported is BMP (bmp) or JPEG (jpg).
• The individual file size limit is 6 MB.
• The maximum image size is 4,800 x 4,800 pixels. If the image size is less than 420 × 234 pixels, the image is displayed in the middle of the screen with the extra area appearing in black.
• Up to 10 files can be saved.
• If the USB flash drive does not have any pictures, the No files detected message appears.
29
30
Interface Settings Wallpaper Settings
■
Select wallpaper
H
SETTINGS button System Settings Clock Clock/Wallpaper Type
Wallpaper
1.
Rotate i to select a desired wallpaper. Press u
.
The preview is displayed on the left side on the screen.
The pop-up menu appears on the screen.
1 Select wallpaper
From the pop-up menu, rotate to select Preview and press to see a preview at full-size screen.
To go back to the previous screen, press to select
OK , or press the BACK button.
When the file size is large, it takes a while to be previewed.
2.
Rotate i to select Set . Press u
.
The display will return to the wallpaper list.
Interface Settings Wallpaper Settings
■
Delete wallpaper
H
SETTINGS button System Settings Clock Clock/Wallpaper Type
Wallpaper
1.
Rotate i to select a previously imported wallpaper that you want to delete. Press u
.
The preview is displayed on the left side on the screen.
The pop-up menu appears on the screen.
1 Delete wallpaper
You cannot delete the factory default images.
2.
Rotate i to select Delete . Press u
.
The confirmation message will appear.
3.
Rotate i to select Yes . Press u
.
The display will return to the wallpaper list.
31
32
Interface Settings Unit Settings
Unit Settings
H
SETTINGS button System Settings Others Units
Sets the map units to either miles (factory default) or kilometers (km).
Rotate i to select the map unit.
Press u
.
Interface Settings Language Settings
Language Settings
H
SETTINGS button System Settings Others Language
Set the system language used on all screens. You can choose from three languages:
English , Français (French), Español (Spanish).
Rotate i to select the system language. Press u
.
1 Language Settings
Voice confirmation of cities and streets only occurs when English is the system language.
When Français or Español is selected, some messages continue to be displayed in English.
33
34
Interface Settings Background Color
Background Color
H
SETTINGS button System Settings Others Background Color
Changes the background color of the navigation screen and the touchscreen.
Rotate i to select a desired color.
Press u
.
Header Clock Display
H
SETTINGS button System Settings Others Header Clock Display
Selects whether the clock display comes on.
Rotate i to select an option. Press u
.
Interface Settings Header Clock Display
The following options are available:
• On (factory default): The system displays the clock in the navigation screen.
• Off : Disables the feature.
35
Personal Information
H
SETTINGS button
Navi Settings
Personal Info
Use the personal information menu to select and set your address books, home address, and PINs. You can also delete unwanted destinations from the list of previously routed destinations.
Rotate i
to select an item. Press u
.
1 Personal Information
Personal information cannot be backed up or moved to another navigation system.
36
The following items are available:
• Address Book : Stores new addresses or edits your address book.
• Edit Go Home : Sets or edits your home address.
• PIN Number : Sets or changes your PIN.
• Previous Destination : Deletes the destination history.
• Category History : Deletes the place categories you recently used.
• Download POI : Edits and deletes the Imported POI categories.
2 Editing POI Categories P. 47
Personal Information Address Book
Address Book
H
SETTINGS button Navi Settings Personal Info Address Book
Store up to 200 address entries in the address book. You can add, edit, and delete information in the address book.
Move w
or y
to display only the addresses in the selected category.
1 Address Book
If you have PIN-protected your address book, enter your PIN when prompted. Press u
to select OK . PINs are optional.
Any address book categories you create are also displayed.
2 Selecting an Address Book Category P. 40
■
Adding an Address Book Entry
H
SETTINGS button Navi Settings Personal Info Address Book
This section explains how to enter the name and address.
1.
Move r
and rotate i
to select
Add New Address . Press u
.
1 Adding an Address Book Entry
If you do not give the address a name, one is automatically assigned (e.g., Address 001). You can re-enter, edit, or make changes to any entry.
“Address” is the only required field.
Continued 37
Personal Information Address Book
2.
Rotate i
to select an item. Press u
.
38
The following items are available:
• Name : Edits the name of the entry.
• Address : Edits the address of the entry.
• Phone No.
: Edits the phone number of the entry.
• Category : Specifies the category of the entry.
• Alert : Alerts you when you approach the address entry.
On : Beeps and displays a message when your vehicle gets near the entry.
Off (factory default): Disables the feature.
3.
Rotate i
to select Name . Press u
.
4.
Enter a name or title. Move r
to select OK .
5.
Rotate i
to select Address . Press u
.
6.
Rotate i
to select an item for specifying the address. Press u
.
Personal Information Address Book
The following items are available:
• Current Position: Select your current location.
• Address: Enter an address on the character input screen when prompted.
• Previous Destinations: Select a previous destination.
• Place Name: Enter the name of a place/landmark.
• Place Category: Select a category to search for a place/landmark (e.g., Banking,
Lodging).
• More Search Methods : Displays additional search method entries.
2 Entering a Destination P. 84
■
Editing an Address Book Entry
H
SETTINGS button Navi Settings Personal Info Address Book
1.
Rotate i
to select the address to edit. Press u
.
2.
Enter the name, address, phone number, and category fields.
2 Adding an Address Book Entry
3.
Move r
and rotate i
to select
OK . Press u
.
1 Adding an Address Book Entry
When you use Place Name or Place Category , the phone number is automatically entered.
You can also add a phone number and category.
1 Editing an Address Book Entry
The entered contents are displayed on the Edit address screen.
39
40
Personal Information Address Book
■
Selecting an Address Book Category
H
SETTINGS button Navi Settings Personal Info Address Book
1.
Rotate i
to select an address.
Press u
.
2.
Rotate i
to select Category .
Press u
.
3.
Rotate i
to select a category.
Press u
.
Create a category in advance.
■ Creating a New Category
1.
Move r
and rotate i
to select New Category . Press u
.
2.
Enter a name and select an icon when prompted.
The created category is displayed in the list of categories.
■ Deleting or Editing a Category
1.
Move r
and rotate i
to select Delete or Edit . Press u
.
2.
Delete an existing category, or change the name and icon.
The selected category to delete is indicated with a trash icon. Move r
and rotate i
to select OK .
1 Selecting an Address Book Category
You can have up to 100 categories (including
“Unfiled”).
If you delete a category that is used by other addresses, the category type for those addresses changes to “Unfiled.”
Personal Information Address Book
■
Deleting an Address Book Entry
H
SETTINGS button Navi Settings Personal Info Address Book
1.
Rotate i
to select the address to delete. Press u
.
2.
Move r
and rotate i
to select
Delete . Press u
.
3.
Rotate i
to select Yes . Press u to delete the address.
1 Deleting an Address Book Entry
When you transfer the vehicle to a third party, delete all address book entries.
41
42
Personal Information Home Address
Home Address
H
SETTINGS button Navi Settings Personal Info Edit Go Home
Set a home address that you frequently use.
1.
Edit the name, address, and phone number the same way as an address in the address book.
2 Adding an Address Book Entry
2.
Move r
and rotate i
to select
OK . Press u
.
1 Home Addresses
If you have PIN-protected your home addresses, enter your PIN when prompted. Press u
to select OK . PINs are optional.
If your home street is not in the system database, park on the nearest verified street to your home.
When entering the “Address” field, rotate i
to select Current Position to use your current location as the home address and press u
.
You can delete a home address if necessary.
Move r
and rotate i
to select Clear Home
Entry . Press u
. Rotate i
to select Yes . Press u
.
When you transfer the vehicle to a third party, delete all home addresses.
The home icon is shown on the map screen on the 1/20 and 1/8 mile scales.
Personal Information PIN Numbers
PIN Numbers
H
SETTINGS button Navi Settings Personal Info PIN Number
Set a four-digit PIN for protecting personal addresses and your home address. Once you set a PIN, you are prompted to enter it whenever you access a personal address or a home address.
1.
Rotate i
to select the PIN to create. Press u
.
1 PIN Numbers
PIN
Personal Identification Number (PIN) is a password used to access personal data.
PINs are optional. If you choose to use a PIN, keep a note of the number in a secure location. If you forget your PIN, a dealer will have to reset the navigation system and all of your stored information will be erased. The factory default is no PIN.
If you want to stop using a PIN, move
Turn off PIN entry . Press u
.
r
to select
2.
Rotate i
to select a digit to enter. Press u
to select OK .
Repeat to enter a new four-digit
PIN.
3.
Re-enter the new PIN, when prompted, to confirm the number you just entered. Press u to select
OK .
If you have not entered the same number both times, an
“INCORRECT PIN” message is displayed. Enter your PIN again.
43
44
Personal Information Previous Destination
Previous Destination
H
SETTINGS button Navi Settings Personal Info Previous Destination
The navigation system maintains a list of your previously routed destinations as a shortcut for entering the same destination in the future. You can delete some or all of your previous destinations from the list.
1.
Rotate i
to select the destination to delete. Press u
.
Repeat the procedure as necessary.
Items to be deleted are indicated with a trash icon.
1 Previous Destinations
Up to 50 destinations can be stored.
To cancel the selection of a previous destination, rotate i
to highlight the destination again.
Press u
to de-select it.
2.
Move r
and rotate i
to select
OK to delete the selected destinations.
Trash icon
Personal Information Category History
Category History
H
SETTINGS button Navi Settings Personal Info Category History
The navigation system maintains a list of your recently used place categories as a shortcut for selecting the same categories in the future. You can delete some or all of your recently used categories from the list.
1.
Rotate i
to select the category to delete. Press u
.
Repeat the procedure as necessary.
Items to be deleted are indicated with a trash icon.
1 Category History
Up to 50 categories can be stored.
To cancel the selection of a category, rotate i to highlight the category again. Press u
to deselect it.
2.
Move r
and rotate i
to select
OK to delete the selected categories.
Trash icon
45
46
Personal Information Download POI
Download POI
Import custom Points of Interest (POI) into the navigation system and set the POI as a destination. You can also add, edit, and delete POIs.
■
Importing POI Categories
H MENU button (on map) More Search Methods Download POI
1.
Connect a USB flash drive with stored POI data to the USB connector.
2.
Move r
and rotate i
to select
Import from USB . Press u
.
1 Importing POI Data
For more information about connecting a USB flash drive.
2 Connecting a USB Flash Drive P. 191
POI data in csv and kml formats can be imported.
You can download POI data from various POI websites.
3.
Rotate i
to select a category to import. Press u
.
■
Editing POI Categories
H
SETTINGS button
Navi Settings
Personal Info
Download POI
1.
Rotate i
to select the downloaded POI category to edit.
Press u
.
Personal Information Download POI
47
48
Personal Information Download POI
2.
Rotate i
to select an item. Press u
.
The following items are available:
• Alert Setting : Alerts you when you approach the places/landmarks in the category.
On : Beeps and displays a message when your vehicle gets near the places/ landmarks in the category.
Off (factory default): Disables the feature.
• Delete Category : Deletes all places/landmarks and icon in the selected category.
• Edit Icon : Changes the category icon.
Routing
H
SETTINGS button
Navi Settings
Routing
Choose various settings that determine the navigation system functionality during route calculation.
Rotate i
to select an item. Press u
.
The following items are available:
• Route Preference : Changes the route preferences (calculating method).
• Unverified Routing : Sets whether you use the route guidance in unverified areas.
• Traffic Rerouting : Sets whether you use automatic recalculation based on traffic information.
• Edit POI Search Radius Along Route : Sets the distance from the route to find waypoints.
2 Edit POI Search Radius Along Route P. 54
• Avoided Area : Specifies areas to avoid when calculating a route.
49
50
Routing Route Preference
Route Preference
H
SETTINGS button Navi Settings Routing Route Preference
Change the route preference by selecting minimum or maximum driving methods.
1.
Rotate i
to select an item. Press u
.
2.
Rotate i
to select Min or Max .
Press u
.
Repeat step 1 and 2 as necessary.
3.
Move r
to select OK . Press u
.
1 Route Preference
The calculated route may be the shortest route or the route you would choose. For safety reasons, the system generally applies the following rules to your route:
• Shortcuts through residential areas are avoided.
• Right turns are favored over left turns or Uturns.
• Time-restricted turns (turns prohibited at certain times of the day) are not used.
Check the ferry schedule when the calculated route includes ferry route.
ETC is short for the Electronic Toll Collection system.
Routing Unverified Routing
Unverified Routing
H
SETTINGS button Navi Settings Routing Unverified Routing
Receive turn-by-turn map and voice guidance in unverified areas.
Rotate i
to select On or Off . Press u
.
1 Unverified Routing
Unverified roads are found in rural areas, and typically include residential streets away from the center of a town. They may not be accurate, and can contain errors in location, naming, and address range.
Unverified roads are shown only when viewing the map in the 1/20, 1/8, or 1/4 mile map scales.
Straight line guide
Differences
Route line
Off
On or Off?
The driver wishes to manually
Route calculation navigate using the navigation map and choose the streets that lead to the destination.
Route is usually longer, using verified roads whenever possible.
The route line uses verified streets only (when possible).
If Straight Line Guide is set to On , a pink vector line is displayed on the map that continually points to your destination.
On (factory default)
The driver chooses to let the navigation system suggest possible routing, knowing that the guidance may not be accurate.
Route is shorter, but uses unverified (purple) streets that may not be accurate.
A blue-pink route line highlights suggested unverified streets on the map while traveling to your destination.
Blue-pink route line
51
52
Routing Unverified Routing
Differences
Cautionary messages
Guidance
(map/voice)
Directions list
Off
Cautionary pop-up screens and voice announcements remind you to obey all traffic restrictions when starting route guidance, approaching an unverified area, and entering an unverified street.
There is no turn-by-turn map or voice guidance.
A direction list is typically not available. However, depending on your route, directions are provided to help you reach the first available verified road.
On (factory default)
Cautionary pop-up screens and voice announcements remind you to obey all traffic restrictions when entering an unverified street.
Voice guidance commands end with the phrase “if possible” to remind you to verify all traffic restrictions.
A direction list is provided showing street names and turn symbols in pink.
Routing Traffic Rerouting
Traffic Rerouting
H
SETTINGS button Navi Settings Routing Traffic Rerouting
A faster route can be calculated based on continuously updated traffic information.
Rotate i
to select an option. Press u
.
1 Traffic Rerouting
You must be in or near a traffic-enabled city to receive coverage for that area. FM Traffic is available in the lower 48 states and Hawaii.
Automatic traffic rerouting may not provide a detour route depending on circumstances.
The following options are available:
• On : The system reroutes automatically based on traffic information.
• Off (factory default): Disables the feature.
53
54
Routing Edit POI Search Radius Along Route
Edit POI Search Radius Along Route
H
SETTINGS button Navi Settings Routing Edit POI Search Radius
Along Route
Select the distance from your highlighted route line (on either side of your route) that the system will search for a waypoint.
You can specify a different search distance for freeways and surface streets.
1.
Rotate i
to select an item. Press u
.
2.
Rotate i
to select a search distance. Press u
.
1 Edit POI Search Radius Along Route
The search distance does not affect the search range used for the Find Nearest voice commands
(e.g., say d
“Find nearest gas station” ).
The following items are available:
• On Freeways : 1, 2, 5, or 10 miles can be set. Factory default is 2 miles.
• On Surface Streets : 1/2, 1, 2, or 5 miles can be set. Factory default is 1/2 mile.
Routing Avoided Area
Avoided Area
H
SETTINGS button Navi Settings Routing Avoided Area
Specify up to five areas to avoid (e.g., road construction, closures), if possible, when the system calculates routes to your destination.
1.
Move r
and rotate i
to select
New Area , or rotate i
to select an existing area to edit.
2.
Rotate i
to select Name to label the area to avoid. Press u
.
3.
Enter a name or title. Move r
to select OK .
4.
Rotate i
to select Area to define the area to avoid. Press u .
1 Avoided Area
The maximum size of an “avoid area” is approximately 1 square mile.
If your selected area contains a freeway, you are asked “Do you want to avoid freeways?”
Answering “No” allows you to use a route through an avoid area on a freeway without any pop-up messages.
You can select areas to avoid, however you cannot select roads or areas that you want the system to use for routing.
You can enter up to 25 characters for the name.
The following options are available (after an area is set):
• View Area : Displays the selected avoid area on the map.
• Delete : Deletes the selected avoid area.
55
Routing Avoided Area
5.
Rotate i
to select a method for specifying the area. Press u
.
1 Avoided Area
Avoid area can be set in the 1/20, 1/8, or
1/4 mile map scales.
56
The following options are available:
• Address : Specify the general area by entering an address.
• Map Input : Specify the general area by map input.
Cursor 6.
If you select Map Input , scroll the map to position the cursor over your desired start point, adjusting the map scale as necessary. Press u
to mark the start point.
To redo the area selection, press the BACK button.
7.
Scroll the map to “draw” the area.
Press u
to mark the end point.
8.
Press u
to select OK .
The area you specify is displayed in the list of areas to avoid.
Avoid area
Guidance
H
SETTINGS button
Navi Settings
Guidance
Choose various settings that determine the navigation system functionality during route guidance.
Rotate i
to select an item. Press u
.
The following items are available:
• Guidance Mode : Sets whether to display only the map screen or a split mapguidance screen.
• Street Name Guidance : Sets whether to read out the street names during voice guidance.
• Non-map screens (models without LaneWatch): Sets whether the guidance screen interrupts the screen display.
• Next Maneuver Pop Up (models with LaneWatch): Sets whether to display the guidance information to the destination or the next waypoint.
• Guidance Point : Sets whether to display the guidance information to the destination or the next waypoint.
• Estimated Time : Sets whether to display the remaining time or arrival time to the guidance point.
57
58
Guidance Guidance Mode
Guidance Mode
H
SETTINGS button Navi Settings Guidance Guidance mode
Select the display mode for the map and guidance screens.
Rotate i
to select an option. Press u
.
1 Guidance Mode
The guidance mode can also be selected from the map menu.
Press the NAV button to switch between the map, next guidance direction, and a list of guidance directions.
The following options are available:
• Map (factory default): Displays only the map screen. When you approach a guidance point, the next guidance point appears.
Map screen Next Maneuver screen
Near the next guidance point
Next guidance point
• Direction List : Displays the map and direction list simultaneously on the map screen. When you approach a guidance point, the next guidance point appears.
Direction List screen Next Maneuver screen
Near the next guidance point
Guidance direction list Next guidance point
• Next Maneuver : Displays the map and next guidance point simultaneously on the map screen.
Next Maneuver screen Next Maneuver screen
Near the next guidance point
Next guidance point
Guidance Guidance Mode
59
60
Guidance Street Name Guidance
Street Name Guidance
H
SETTINGS button Navi Settings Guidance Street Name Guidance
The navigation system includes the street names during voice guidance (e.g., “Turn right on Main Street”).
Rotate i
to select an option. Press u
.
1 Street Name Guidance
This feature is only available when the system language is set to English .
This feature may not be available in non-English speaking areas.
The following options are available:
• On (factory default): Voice guidance includes the street names.
• Off : Disables the feature.
Models without LaneWatch
Non-map screens
H
SETTINGS button
Navi Settings
Guidance
Non-map screens
The navigation system temporarily interrupts the screen display to view the guidance screen as you approach a guidance point.
Rotate i
to select an option. Press u
.
The following options are available:
• On : The guidance screen interrupts other mode screens (e.g., audio, phone, etc, except the rear view camera mode).
• Off (factory default): Disables the feature.
Guidance Non-map screens
61
Guidance Next Maneuver Pop up
Models with LaneWatch
Next Maneuver Pop up
H
SETTINGS button
Navi Settings
Guidance
Next Maneuver Pop up
The navigation system temporarily interrupts the screen display to view the guidance screen as you approach a guidance point.
Rotate i
to select an item. Press u
.
62
The following items are available:
• LaneWatch : Sets whether to view the guidance screen while displaying the
LaneWatch screen.
On (factory default): The guidance screen interrupts the LaneWatch screen.
Off : Disables the feature.
• Non-map Screens : Sets whether to view the guidance screen while displaying other mode (e.g., audio, phone, etc.) screen.
On : The guidance screen interrupts other mode screens (except the rear view mode).
Off (factory default): Disables the feature.
Guidance Point
H
SETTINGS button Navi Settings Guidance Guidance Point
Set the guidance point to display on the map screen.
Rotate i
to select an option. Press u
.
The following options are available:
• Destination (factory default): Displays the remaining/arrival time and distance to the destination.
• Next Point : Displays the remaining/arrival time and distance to the next waypoint.
Guidance Guidance Point
63
64
Guidance Estimated Time
Estimated Time
H
SETTINGS button Navi Settings Guidance Estimated Time
Select the estimated time to display on the screen.
Rotate i
to select an option. Press u
.
The following options are available:
• Arrival : Displays the arrival time to the destination or the next waypoint.
• Remaining (factory default): Displays the remaining time to the destination or the next waypoint.
Map
H
SETTINGS button
Navi Settings
Map
Select the landmark icons to display on the map, change the orientation of the map, display your current location, and learn the meaning of the icons, colors, and symbols displayed on the map.
Rotate i
to select an item. Press u
.
The following items are available:
• Show Icon on Map : Selects the icons to display on the map.
• Color (Day) : Selects the color of the map for the Day mode.
• Color (Night) : Selects the color of the map for the Night mode.
• View : Selects the map orientation (North-up, Heading-up, or 3D map).
2 View (Map Orientation) P. 72
• 3D Angle Adjustment : Adjusts the viewing angle for the 3D map.
• Straight Line Guide : Sets whether to display a straight guideline to the destination or waypoint.
Continued 65
66
Map Estimated Time
• Current Location : Displays and saves your current location.
• Map Legend : Displays an overview of the map features.
• Display Tracking : Sets whether to display the tracking dots on the map.
• Delete Tracking : Deletes the tracking dots on the map.
2 Deleting Tracking Dots P. 79
• Correct Vehicle Position : Adjusts the position of the vehicle on the map.
2 Correct Vehicle Position P. 80
• System Device Information : Views database, software, device, and vehicle identification information.
2 System Device Information P. 270
• Map Data Update : Checks the map data update status when updating the map database.
Map Showing Icons on Map
Showing Icons on Map
H
SETTINGS button Navi Settings Map Show Icon on Map
Select the icons that are displayed on the map.
1.
Rotate i
to select an item. Press u
.
1 Showing Icons on Map
You can display or hide the icons using voice commands on the Voice Portal screen (e.g., say d
“Display hospital” ).
If you have PIN-protected your address book, enter your PIN when prompted. Move r
to select OK . PINs are optional.
2.
Rotate i to select an option.
Press u
.
Repeat step 1 and 2 as necessary.
3.
Move r
to select OK . Press u
.
The following options are available:
• All On : Displays the landmark icons.
• Customize : Fine-tunes the icon display.
• Off : Hides the landmark icons.
67
68
Map Showing Icons on Map
■
Fine-tuning the Icons
Icons in some categories can be fine-tuned to display or hide.
1.
Rotate i
to select the icons to display on the map. Press u
.
Pressing u
toggles the icon display on or off.
Repeat the procedure as necessary.
2.
Move r
and rotate i
to select
OK . Press u
.
Color
Set separate map colors for Day and Night modes.
■
Color (Day)
H
SETTINGS button
Navi Settings
Map
Color (Day)
Rotate i
to select a color for the
Day mode. Press u
.
1 Color (Day)
The factory default is set to Beige .
Map Color
■
Color (Night)
H
SETTINGS button Navi Settings Map Color (Night)
Rotate i to select a color for the
Night mode. Press u
.
1 Color (Night)
The factory default is set to Blue .
69
70
Map Color
■
Switching Display Mode Manually
Set the screen brightness separately for Day and Night modes. Press the a
(Display mode) button to cycle through the display modes (Day to Night to Off).
1.
Press the a
button.
The Brightness bar is displayed for a few seconds.
Rotate i
to adjust the brightness. Press u
.
2.
Press the a
button again.
Repeat the procedure to switch the display modes.
1 Switching Display Mode Manually
A visual guide helps you see the difference between Day and Night modes.
Recommended Settings
• Select mid-range for the dash illumination.
• Select White for the map Day display and
Black for the map Night display.
Illumination control a
button
Priority
Sunlight sensor
(see your
Owner’s Manual for location)
Dash illumination adjustment buttons (see your
Owner’s Manual for location)
Headlights
(Auto/On/Off)
Screen color choice
Operation
1
2
3
Selects Day, Night, or Off display mode. This button has the highest priority and overrides all other display control adjustments listed below.
Remember : Once you press this button, you assume full manual control of the display mode until the power mode is set to VEHICLE OFF (LOCK).
If the sunlight sensor detects daylight and the headlights are turned on, the system automatically overrides the
Night display and displays the Day display mode.
Remember : If desired, use the a
button to override this automatic choice.
When headlights are turned on, and you wish to have the
Day display mode, adjust the illumination to the full brightness setting (beeps).
Remember : Adjust the dash brightness back to mid-range to allow auto switching by sensing the headlights are on or off.
4 When turned on, the display changes to Night display mode. The previous three controls listed above can
“cancel” this function.
Remember : Use the a
button, or adjust the dash illumination to full brightness, to set the display to your desired choice.
N/A The user can select the color of the screen that will be displayed for the Day and Night display modes described above.
Remember : The factory default is set to beige for Day and blue for Night.
Map Color
71
72
Map View (Map Orientation)
View (Map Orientation)
H
SETTINGS button Navi Settings Map View
Select the map orientation.
Rotate i
to select an option. Press u
.
The following options are available:
• North-Up : Displays the map with North always pointing up.
• Heading-Up : Displays the map so that the direction you are traveling is always pointing up.
• 3D Map : Displays the bird’s eye view map.
1 View (Map Orientation) d
“Display Heading-up” (on Voice Portal screen), d
“Display North-up” (on Voice Portal screen), d
“Display 3D map” (on Voice Portal screen)
The red arrow in the symbol always points North.
Heading-up and 3D map view switch to the
North-up view on the maximum map scale.
The bird’s eye view map switches to the
Heading-up map while scrolling the map.
The viewing angle for the bird’s eye view can be adjusted.
3D Angle Adjustment
H
SETTINGS button Navi Settings Map 3D Angle Adjustment
Adjust the viewing angle.
Rotate i
to adjust the angle. Press u
.
Straight Line Guide
H
SETTINGS button Navi Settings Map Straight Line Guide
Set whether to display a straight guideline to the destination or waypoint
Rotate i
to select an option. Press u
.
The following options are available:
• On (factory default): Displays the straight guideline on the map.
• Off : Disables the feature.
Map 3D Angle Adjustment
73
74
Map Current Location
Current Location
H
SETTINGS button Navi Settings Map Current Location
Display and save your current location for future use as a destination. The address, latitude, longitude, and elevation of your current location are displayed.
■ To save your current location in the address book:
1.
Press
u
Move
to select w necessary.
Address Book
to scroll the map as
.
2.
Edit the name, phone number, and category.
3.
Move r and rotate i to select
OK . Press u
.
1 Current Location d
“Display Current Location” (on Voice Portal screen)
You can also save the current location by saying d
“Register the Current Location” .
If you have PIN-protected your address book, enter your PIN when prompted. Press u
to select OK . PINs are optional.
The elevation is not displayed if the system is receiving insufficient GPS information. When elevation is displayed, it may differ with roadside elevation signs by ±100 feet or more.
Saving your current location does not change or cancel your current route.
Map Map Legend
Map Legend
H
SETTINGS button Navi Settings Map Map Legend
See an overview of the map lines, areas, routes, traffic information, and navigation icons.
Move w
or y
select an item.
The system displays the map legend.
1 Map Legend
A visual guide helps you see the map legend.
75
Map Map Legend
76
■
Map Scale and Functions
The functions that are available from the map screen depend on the map scale.
Function page 1/20 1/8
Map Scale (top: mile, bottom: metric)
1/4 1/2 1 2 5 15 50 150 350 1000
80 200 400 800 1.6
3.2
8 24 80 240 560 1600
Icon display
Landmark icon
Exit info.
One-way traffic
Waypoint
“flag”
Traffic incident
Map orientation
Heading-up
North-up
3D map
Others
Tracking dots
Unverified road
Map features
Avoid areas
Traffic speed
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔
✔
✔
1 Map Scale and Functions
You can change the map scale using voice commands on the Voice Portal screen (e.g., say d
“Display 2 mile scale” ).
You can change between miles or kilometers.
Map Map Legend
■
Map Icons and Functions
Display or hide all icons on the map screen, with the exception of Honda/Acura
Dealer icons which are always shown.
■ Landmark icon
Type
Honda/Acura dealer
Hospital
School
ATM
Gas station
Restaurants
Post office
Grocery store
Hotel/Lodging
Police station
Shopping, Tourist attraction, Bank
Parking garage
Parking lot
Freeway exit info.
Icon display control
Always on
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No icon
No icon
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
Icon selectable
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Icon searchable
Yes
Yes
Yes
Yes
Yes
Yes
1 Map Icons and Functions
You can display or hide the icons using voice commands on the map screen (e.g., say d
“Display hospital” ).
Some icons, like police stations, are not shown, but you can still locate the nearest one with the
Find Nearest voice command (e.g., say d
“Find nearest police station” ).
Icon display control
Icons that can be displayed or hidden using the
Interface Dial or voice command.
Icon selectable
Icons that can be selected as a destination using the Interface Dial.
Icon searchable
Icons that can be searched using the d
Find
Nearest voice command.
77
78
Map Map Legend
■ Traffic icon
Traffic incident
Type
Icon display control
Yes
Icon selectable
No
Icon searchable
Yes
1 Traffic Incident
When you use the Interface Dial to position the cursor (round red circle) over the traffic incident icon, you can view the summary of the incident.
Press u
on the traffic incident icon to view a pop-up message describing the incident in detail.
Map Display Tracking
Display Tracking
H
SETTINGS button Navi Settings Map Display Tracking
The navigation system can be set to display white tracking dots (“breadcrumbs”) on the map screen.
Rotate i
to select an option. Press u
.
The following options are available:
• On : The system displays the white tracking dots.
• Off (factory default): Disables the feature.
■
Deleting Tracking Dots
H
SETTINGS button Navi Settings Map Delete Tracking
Rotate i to select Yes . Press u .
1 Deleting Tracking Dots
When you transfer the vehicle to a third party, delete the tracking dots.
79
80
Map Correct Vehicle Position
Correct Vehicle Position
H
SETTINGS button Navi Settings Map Correct Vehicle Position
Manually adjust the current position of the vehicle as displayed on the map screen if the position appears to be incorrect.
1.
Put the vehicle in Park.
2.
Rotate i
to select Correct
Vehicle Position . Press u
.
3.
Scroll the map to position the cursor over at your correct position.
Press u
.
1 Correct Vehicle Position
An apparent position error can occur where buildings, tunnels, and other objects block or reflect the GPS signals, forcing the system to use
“dead reckoning” to determine your location and direction.
Using this function to adjust vehicle position is not recommended. When the system reacquires a GPS signal, it will automatically place the vehicle in the correct location.
If you continually have to adjust the vehicle position, you may have problems with the GPS reception or there may be database errors.
4.
Rotate i
to position the arrowhead in the correct direction the vehicle is facing.
5.
Press u
to select OK .
Data Reset
Defaulting All the Settings
H
SETTINGS button System Settings Others Factory Data Reset
Reset all the menu and customized settings as the factory defaults.
1.
Rotate i to select Yes . Press u
.
The confirmation message will appear.
2.
Rotate i
to select Yes . Press again to reset the settings.
The confirmation message will appear. Press to select OK .
1 Defaulting All the Settings
When you transfer the vehicle to a third party, reset all settings to default and delete all personal data.
The following settings will be reset:
• Routing & Guidance: Rerouting, Unverified
Area Routing, Traffic Rerouting, Edit Waypoint
Search Area, Guidance Mode, Street Name
Guidance
• Route Preference
81
82
Touchscreen
Changing the Screen Settings
Adjusts the screen settings of the touchscreen.
1.
Select More .
2.
Select Screen Settings .
3.
Use
N
,
B
or other icons to adjust the setting.
1 Changing the Screen Settings
Select X to go back to the previous screen.
Use the / / / icons to turn the page.
The followings are adjustable screen settings:
• Brightness : Adjusts the screen's brightness.
• Contrast : Adjusts the screen's contrast.
• Black Level : Adjusts the screen's black level.
• Display : Changes between the daytime or nighttime modes.
• Beep : Sounds a beep every time you touch the screen.
• Fade Timer : Sets the screen black out timing.
Navigation
This section describes how to enter a destination, select a route to take, and follow the route to your destination. It also describes how to change your route or destination along the way.
Entering a Destination ........................... 84
Address ................................................. 86
Address Book......................................... 92
Previous Destination............................... 93
Place Category ....................................... 94
Place Name ............................................ 96
Place Phone Number .............................. 99
Download POI...................................... 100
Scenic Route ........................................ 101
Intersection .......................................... 102
Map Input............................................ 103
Coordinate .......................................... 105
Calculating the Route ........................... 106
Viewing the Routes .............................. 107
Driving to Your Destination .................108
Viewing the Route ................................108
Listening to Voice Guidance ..................112
Reaching a Waypoint ............................113
Map Menu ..............................................114
Displaying the Map Menu .....................114
Directions .............................................116
Traffic Rerouting™................................118
Changing Your Route ............................120
Pausing the Route .................................121
Canceling the Route .............................121
Adding Waypoints ................................122
Editing the Destination List....................126
Taking a Detour ....................................128
Avoiding Streets ................................... 128
Changing Your Destination ................. 129
Find Nearest Place ................................ 129
Selecting a Destination on the Map ...... 130
Entering a New Destination .................. 131
Resuming Your Trip .............................. 132
83
Entering a Destination
H
MENU button (on map)
This section describes how to enter a destination for route guidance.
Rotate i
to select an item. Press u
.
Select More Search Methods to display additional menu entries.
1 Entering a Destination d
“Display Destination” , d
“Display
Navigation”
If you press the MENU button when en route, the Route Option screen is displayed.
Prior to departure, you can set areas along your route to avoid.
84
The following items are available:
• Address : Sets a destination by entering an address.
• Address Book : Sets a destination by selecting an address stored in your Address
Book.
• Previous Destination : Sets a destination by selecting a previous destination.
• Go Home : Sets your home address as a destination.
• Place Category : Sets a destination by selecting a place/landmark.
• Place Name : Sets a destination by entering a place name.
• Place Phone No.
: Sets a destination by entering the phone number of a place/ landmark.
• Download POI : Sets a destination by using a list of the imported POI (category and places) data you created.
• Scenic Route : Sets a destination by using a list of scenic roads for each state (U.S. and Canada only).
• Intersection : Sets a destination (intersection) by entering two streets.
• Map Input : Sets a destination by scrolling through the map.
• Coordinate : Sets a destination by entering latitude and longitude.
Entering a Destination
85
Entering a Destination Address
Address
H
MENU button Address
Enter an address to use as the destination. The state or province you are currently in is displayed (e.g., California).
Rotate i
to select an item. Press u
.
86
The following items are available:
• City : Selects your destination city.
• Street : Selects your destination street.
• House Number : Enters the house number to select the street.
2 Selecting a Street by House Number P. 91
• ZIP Code : Enters the zip code to select the city.
2 Selecting a City by Zip Code P. 87
• Change State : Selects the state or province.
2 Selecting the State or Province P. 87
Entering a Destination Address
■
Selecting the State or Province
H
MENU button Address Change State
Rotate i
to select a state from the list. Press u
.
1 Selecting the State or Province
Move w
or y
to select the following areas:
• USA for the U.S. mainland, Alaska, Hawaii, and Puerto Rico
• Canada
• Mexico
■
Selecting a City by Zip Code
H
MENU button
Address
ZIP Code
1.
Enter the zip code of your destination.
2.
Move r
to select OK . Press u
.
1 Selecting a City by Zip Code
If your city is not listed, it may be part of a larger metropolitan area. Try entering the street first.
Continued 87
88
Entering a Destination Address
■
Selecting a City
H
MENU button
Address
City
3.
Rotate i
to select the destination city from the list. Press u
.
Next, you are prompted to enter a street name.
The name of the city where you are currently located is displayed.
1.
Enter the name of a different city, or move r
to select OK for the current city. Press u
.
1 Selecting a City
Vehicle position may not be displayed when:
• The automobile is traveling off-road.
• The vehicle position data cannot be updated.
You do not need to enter spaces or symbols
(e.g., &, -, %). Partial matches are supported
(e.g., “ANGELES” to find “LOS ANGELES”).
Using Voice Command (English only)
Say d
“ City ” on the Find address by screen, and the following screen is displayed:
• Say d
“Current City” to select your current location, or say the name of a different city.
• The Say city name screen is not displayed when your vehicle is in Puerto Rico or Mexico.
Entering a Destination Address
Non-detailed area mark: Try entering the street first and then select the city.
■
Selecting a Street
H
MENU button
Address
Street
2.
Rotate i
to select your destination city from the list. Press u
.
A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list. Matching letters are highlighted.
Next, you are prompted to enter a street name.
1 Selecting a City
If your city is not listed, it may be part of a larger metropolitan area. Try entering the street first.
1 Selecting a Street
When entering the names of major freeways, you can use the following abbreviations. For interstates, use an “I” (e.g., I-10). For U.S. freeways, use “US” (e.g., US-18). For state freeways, use the two-character state designation (e.g., CA-101). For county roads, use the appropriate designation (e.g., G-2).
Using Voice Command (English only)
Say d
“ Street ” on the Find address by screen, and the following screen is displayed:
1.
Enter the name of your destination street.
Do not enter the street type
(e.g., street, road, avenue) or direction (e.g., north, south, east, west).
Move r
to select OK to display a list of streets. Press u
.
• Say the name of your destination street, and say the street number as a string of individual numbers.
• Set the route to your destination.
2 Calculating the Route P. 106
• The Say street name screen is not displayed when your vehicle is in Puerto Rico or Mexico.
Continued 89
90
Entering a Destination Address
2.
Rotate i
to select your destination street from the list.
Press u
.
A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list. Matching letters are highlighted.
3.
Enter the street number.
Only valid street numbers can be entered.
4.
Move r
to select OK . Press u
.
5.
Set the route to your destination.
2 Calculating the Route P. 106
1 Selecting a Street
If you did not select a city first and there is more than one city with the specified street, a list of cities is displayed.
Rotate i
to select the desired city from the list.
Press u
.
■
Selecting a Street by House Number
H
MENU button Address House Number
1.
Enter the house number.
Only a valid house number can be entered.
2.
Move r
to select OK . Press u
.
If you did not yet select a street name, enter a street name when you are prompted.
3.
Rotate i
to select your destination street from the list.
Press u
.
Select a city when you are prompted.
4.
Set the route to your destination.
2 Calculating the Route P. 106
Entering a Destination Address
91
92
Entering a Destination Address Book
Address Book
H
MENU button Address Book
Select an address stored in your address book to use as the destination.
1.
Rotate i
to select your destination from the list. Press u
.
2.
Set the route to your destination.
2 Calculating the Route P. 106
Move w
or y
to display only the entries in the categories you have created.
1 Address Book
If you have PIN-protected your address book, enter your PIN when prompted. Press u
to select OK . PINs are optional.
Move r
and rotate i
to select the following items:
• Add New Address : Adds an entry to the address book.
2 Adding an Address Book Entry P. 37
• Sort : Selects Sort by Name or Sort by
Distance .
• Delete All : Deletes all entries in the address book.
Entering a Destination Previous Destination
Previous Destination
H
MENU button Previous Destination
Select an address from a list of your 50 most recent destinations to use as the destination. The list is displayed with the most recent destination at the top.
1.
Rotate i
to select a destination from the list. Press u
.
2.
Set the route to your destination.
2 Calculating the Route P. 106
1 Previous Destination
If Previous Destination is grayed out, there are no previous destinations entered.
Your home address and addresses stored in your address book are not added to the list of previous destinations.
Move r
and rotate i
to select Delete All to delete all previous destinations.
You can delete unwanted previous destinations from the list.
93
94
Entering a Destination Place Category
Place Category
H
MENU button Place Category
Select the category of a place (e.g., Banking, Lodging, Restaurant) stored in the map database to search for the destination.
1.
Rotate
Press i u
.
to select a category.
2.
Rotate i
to select a subcategory.
Press u
.
1 Place Category
This option is convenient if you do not know the exact name of a place or if you want to narrow down the number of matches returned for places with a common name.
Move y
to select Category History to access your recently used place categories. Up to 30 categories can be stored.
You can also delete your recently used place categories.
Search POI Categories helps you to search the subcategory. When you enter a keyword and select OK , the list of appropriate subcategories is displayed.
Entering a Destination Place Category
3.
Rotate i
to select an item. Press u
.
1 Place Category
The straight line distance (as the crow flies, not driving distance) and direction to the destination are shown for the highlighted place.
The following items are available:
• Search by Name : Searches for a place in the subcategory by name. Enter a city name when prompted.
• City Vicinity : Searches for a place in the subcategory within a 20-mile radius of a specific city. Enter a city name and then a place name when prompted. Only the first 1000 matching places/landmarks are displayed.
• Sort by Distance to Travel : Displays all the places in the subcategory sorted by distance from your current location. The closest place is displayed at the top.
4.
Rotate i
to select a place name from the list. Press u
.
5.
Set the route to your destination.
2 Calculating the Route P. 106
95
96
Entering a Destination Place Name
Place Name
H
MENU button Place Name
Enter the name of a place (e.g., business, hotel, restaurant) stored in the map database to use as the destination.
1.
Enter a place name.
2.
Move r
to select OK to display a list of matching hits. Press u
.
1 Place Name
This option is convenient if you know the exact name of a place.
Once a name is entered and selected, move r
to select Sort by Name or Sort by Distance .
Matching letters are highlighted.
3.
Rotate i
to select a place name from the list. Press u
.
If the place name is in multiple categories, the categories are displayed when you select it.
4.
Set the route to your destination.
2 Calculating the Route P. 106
Entering a Destination Place Name
■
Place Name in Multiple Categories
If the place name is in multiple categories in the map database, the following screen is displayed.
1.
Rotate i
to select a place name.
Press u
.
1 Place Name in Multiple Categories
Matching letters are in highlighted.
2.
Rotate i
to select a subcategory.
Press u
.
Continued 97
98
Entering a Destination Place Name
3.
Rotate i
to select a place. Press u
.
4.
Set the route to your destination.
2 Calculating the Route P. 106
1 Place Name in Multiple Categories
Move r
to select Sort by City or Sort by
Distance .
Entering a Destination Place Phone Number
Place Phone Number
H
MENU button More Search Methods Place Phone Number
Select a destination by phone number. Only phone numbers in the database are recognized.
1.
Enter the area code and phone number.
2.
Rotate i
to select OK . Press u
.
3.
Set the route to your destination.
2 Calculating the Route P. 106
1 Place Phone Number
All 10 digits must be entered.
Phone numbers of private residences entered in your address book are not stored in the database and thus cannot be used to search for a destination.
A list is displayed if there are multiple locations in the database with the same phone number.
Rotate i
to select a place from the list. Press u
.
99
100
Entering a Destination Download POI
Download POI
H
MENU button More Search Methods Download POI
Select a place imported into the navigation system as the destination.
1.
Rotate i
to select a category from the list. Press u
.
1 Download POI
Move r
and rotate i
to select the following items:
• Import from USB : Imports POI data into the navigation system.
2 Importing POI Categories P. 46
• Delete All : Deletes all POI entries.
• Help with Feature : Views tips for the
Download POI feature.
2.
Rotate i to select a place. Press u
.
3.
Set the route to your destination.
2 Calculating the Route P. 106
Entering a Destination Scenic Route
Scenic Route
H
MENU button More Search Methods Scenic Route
Select a scenic road as a destination (U.S. and Canada only).
1.
Rotate i
to select a state. Press u
.
1 Scenic Route
If you select a scenic road that runs through multiple states, only the portion of the road in the selected state is displayed.
2.
Rotate i to select a scenic road.
Press u
.
3.
Set the route to your destination.
2 Calculating the Route P. 106
101
102
Entering a Destination Intersection
Intersection
H
MENU button More Search Methods Intersection
Select the intersection of two streets as the destination. The state or province for your current location is displayed at the top of the screen (e.g., California).
1.
Rotate i
to select the intersection search method. Press u
.
2.
Set the route to your destination.
2 Calculating the Route P. 106
The following options are available:
• City : Selects the city where the intersection is located. You are prompted to enter the name of the two intersecting streets.
• Street : Selects the two intersecting streets. The city or cities that the streets are located in are displayed.
• Change State : Selects the state or province.
2 Selecting the State or Province P. 87
1 Intersection
It is usually easier to select Street to find the streets first. The city or cities that the streets are in will be displayed. If you select City and your city is not listed, it may be part of a larger metropolitan area. Try entering the street first.
If the intersection is outside the state you are currently in, rotate i
to select Change State .
2 Selecting the State or Province P. 87
If there is more than one intersection, you are prompted to select the intersection. If the two streets that you have selected do not intersect, no intersection is entered.
Map Input
H
MENU button More Search Methods Map Input
Use the Interface Dial to manually select an icon or a location on the map screen as the destination.
You are prompted to define the map area to display.
1.
Rotate i
to select an item. Press u
.
Entering a Destination Map Input
The following items are available:
• Current Position : Your current location is centered on the map.
• State : You are prompted to select the state.
2 Selecting the State or Province P. 87
• City : You are prompted to select the city.
• USA, Canada and Mexico : Your current location is displayed on a map of the country.
Continued 103
104
Entering a Destination Map Input
2.
Scroll the map to position the cursor over your desired destination, adjusting the map scale as necessary.
If the address is not the desired location, scroll the map to another location and try again.
3.
Press u
to display the route calculation menu.
2 Calculating the Route P. 106
4.
Rotate i
to select Set as
Destination.
Press u
.
1 Map Input
Auto Zoom
Press u
repeatedly on the map to zoom in (to the scale 1/4 mile) while scrolling the map.
Information icons are displayed at scales from 1 mile to 1/4 mile. Place/landmark icons are displayed at 1/8 mile or less. Roads are displayed at 1/4 mile or less.
If you select multiple icons within the cursor radius, you are prompted to select one of the items from a list.
2 Selecting a Destination on the Map P. 130
Entering a Destination Coordinate
Coordinate
H
MENU button More Search Methods Coordinate
Specify a location using latitude and longitude map coordinates.
1.
Enter the latitude and select OK .
2.
Enter the longitude and select OK .
1 Coordinate
Latitude and longitude must be entered up to the seconds’ value.
3.
Move w to scroll the map to position the cursor over your desired destination, adjusting the map scale as necessary.
If the address is not the desired location, scroll to another location and try again.
4.
Press u
to display the route calculation menu.
2 Calculating the Route P. 106
5.
Rotate i to select Set as
Destination.
Press u
.
105
106
Calculating the Route
This section describes how to calculate your route.
1.
Rotate i
to select Set as
Destination . Press u
.
The system calculates and displays the route line on the map screen.
Move w
to scroll the map around the destination.
The following options are available:
• View Routes : Displays three different routes.
• Route Preference : Move r
to select Route Preference to change the route preferences (calculating method).
2.
Follow the route guidance to your destination.
The system provides you with pop-up messages if your route passes through unverified areas, avoid areas, or areas with traffic restrictions.
1 Calculating the Route
The straight line distance (as the crow flies, not driving distance) and direction to the destination are shown.
You cannot use voice commands while the system is calculating the route.
Search Nearby
You can find the nearest place/landmark (e.g., nearest gas station) by specifying a category.
Call
You can place a telephone call to the destination phone number.
2 Bluetooth ® HandsFreeLink® P. 202
Save to Address Book
You can add the destination address to the address book.
2 Adding an Address Book Entry P. 37
Edit/Delete Entry
You can edit or delete the address book entry.
2 Editing an Address Book Entry P. 39
Edit Home Entry
You can edit your home address entry.
Calculating the Route Viewing the Routes
Viewing the Routes
View three different routes to your destination.
Rotate i
to select a route. Press u
.
The travel distance and estimated travel time is displayed for each route.
The system calculates and displays the route line on the map screen.
1 Viewing the Routes
It is not unusual for some calculated route options to be identical.
107
Driving to Your Destination
108
This section describes how to follow the route guidance to your destination, receive traffic information and choose the icons displayed on the map screen.
Viewing the Route
■
Map Screen
After calculating the route to your destination, the route is displayed on the map screen.
As you drive, the system tracks your position on the map in real time and provides guidance as you approach each guidance point on the route.
1 Viewing the Route d
“Display Map”
You can change the map scale using voice commands (e.g., say d
“Display 2 mile scale” ).
You can also change the map scale by rotating i
.
You can control the icons displayed on the map screen using voice commands (e.g., say d
“Display post office” ).
You can obtain information about the route using voice commands (e.g., say d
“How long to the destination?” ).
You can display the next guidance point on the map screen by saying d
“Display Map Guide”
(when en route).
If you scroll the map while en route, the time and distance to destination indicators are replaced with an indicator showing distance from the current vehicle position.
You can display only the map screen or a split map-guidance screen.
Driving to Your Destination Viewing the Route
■
Guidance Screen
The guidance screen offers an alternative way to view your route.
The next guidance point is displayed as you approach each guidance point on the route.
You can also view a list of guidance directions.
1 Guidance Screen
A visual guide helps you check the guidance screen.
109
110
Driving to Your Destination Viewing the Route
■
Route Line
When driving on verified streets, the route line is light blue. The route line display changes when driving on unverified streets:
Straight line guide
• If Unverified Routing is Off , the route line uses verified streets only
(when possible). If Straight Line
Guide is set to On , a pink “vector line” pointing directly towards your destination is displayed.
1 Route Line
You can set Unverified Routing to Off to follow your own route to the destination. If
Unverified Routing is On , be aware that unverified streets may not be displayed accurately.
You can always view the entire route by simply saying d
“Display entire route.”
The route line may also consist of red, orange, or green segments when traffic information is displayed.
Blue-pink route line
• If Unverified Routing is On , the route line changes to a blue-pink line to indicate that the route line uses unverified streets.
■
Deviating From the Planned Route
If you leave the calculated route, the system automatically recalculates a route to the desired destination based on your current location and direction.
Driving to Your Destination Viewing the Route
■
Tracking Dots
You can display a series of dots (breadcrumbs) to track the path you are taking. If needed, you can follow the dots back to the mapped road you originally left.
1 Tracking Dots
A message “Not on a digitized road” may appear when you drive half a mile away from a mapped road.
Breadcrumbs may occasionally be displayed in urban areas, such as large parking lots in shopping malls, in new subdivisions where the roads are not yet in the database, or in areas where a GPS signal is unavailable, such as in a parking garage.
Breadcrumbs are limited to approximately 150 miles. Breadcrumbs at the beginning of the trail are deleted if you exceed that distance.
Breadcrumbs are displayed only at 1/20, 1/8, 1/4, and 1/2 mile map scales.
111
112
Driving to Your Destination Listening to Voice Guidance
Listening to Voice Guidance
H
ENTER button (on map) Voice
As you approach each guidance point, a pop-up window is displayed on the map screen with instructions for you to follow. Voice guidance for each guidance point is also provided.
Typically, you hear three prompts:
• 1/2 mile from the guidance point (2 miles on freeway)
• 1/4 mile from the guidance point (1 mile on freeway)
• Just before the guidance point
To replay voice guidance, rotate i
to select Voice in the Map Menu.
If you select Voice between guidance points, voice guidance for the next guidance point is provided.
1 Listening to Voice Guidance d
“Voice” (on the map screen)
You can turn voice guidance OFF if you prefer.
Press the SETTINGS button. Select System
Settings and set Volume to 0 .
When driving in unverified areas, the phrase “if possible” is inserted before each voice guidance prompt.
Voice in the Map Menu may be grayed out if:
• The system is in process of gathering the route guidance information.
• The vehicle is out of the road (e.g., pulling in a parking lot).
The timing of voice guidance varies depending on the type of road you are on and the distance to the next guidance point.
Reaching a Waypoint
When you reach a waypoint, a pop-up message is displayed. You can continue or pause the route guidance.
Rotate i
to select No to pause the route guidance. Press u
.
Select Yes to continue the guidance.
Driving to Your Destination Reaching a Waypoint
■
Resuming the route guidance
You can resume the route guidance in the following ways:
• Restart the engine when you stop your car (e.g., to rest, stop for gas, etc.).
• Select Resume Guidance from the navigation menu or the map menu.
113
Map Menu
Displaying the Map Menu
Use the Map Menu to control the icons displayed on the screen and to display traffic information and messages. You can also use the Map Menu to find locations or to cancel the route.
1.
On the map screen, press u
.
The Map Menu is displayed on the map screen.
1 Map Menu
If you scroll the map while en route, press the
NAV (or BACK) button to return to the current position map screen, then press u
.
Traffic Incidents
You must be in or near a traffic-enabled city to receive coverage for that area. FM Traffic is available in the lower 48 states and Hawaii.
The incident icons are displayed on the 5 mile or less map scale.
2 Map Scale and Functions P. 76
2.
Rotate i
to select an item. Press u
.
114
The following items are available:
• Voice: Select to hear the voice guidance when en route.
2 Listening to Voice Guidance P. 112
Map Menu Displaying the Map Menu
• Map/Guidance : Allows you to select the map and guidance settings (display mode, icons to display on the map, map orientation, map color, and 3D view angle), display your current location and an overview of the map features.
2 View (Map Orientation) P. 72
• Pause Guidance : Pauses your current route.
• Resume Guidance : Resumes your current route. This item is displayed while the route guidance is paused.
• Cancel Route: Cancels your current route.
• Directions : Displays a list of the guidance points.
• Search Nearby: Allows you to find the nearest place/landmark (e.g., nearest gas station) by specifying a category. You can then add the location to the list of destinations, set as a waypoint, or set as your destination.
• Traffic Incidents: Displays a list of the traffic incidents around your current location or on your current route.
1 Map Menu
Directions
The system provides freeway exit information only in the U.S.
115
116
Map Menu Directions
Directions
H
ENTER button (on map) Directions
Display a list of the guidance points on your route for your confirmation.
1.
Rotate i
to select a guidance point from the list. Press u
.
The system displays a map of the guidance point.
1 Directions
Guidance points with exit information are indicated by a (freeway exit information) icon. Move r
to select Exit Info to display the exit information.
2 Freeway Exit Information P. 117
The system provides freeway exit information only in the U.S.
The route guidance information is automatically deleted when you reach your destination.
2.
Press u
to select Back to list or press the BACK button to return to the previous screen.
Map Menu Directions
■
Freeway Exit Information
H
ENTER button (on map) Directions Exit Info
Display a list of the freeway exits for the route. You can view freeway exit information (whether the exit is near gas stations, restaurants, ATMs, etc.) and add new destinations or waypoints to the calculated route.
1.
Rotate i
to select an exit from the list. Press u
.
1 Freeway Exit Information d
“Display Freeway Exit Information”
You can scroll the map and select a (freeway exit information) icon on the map screen to display the freeway exit information. The icon is only displayed if there is exit information available.
Icons are displayed only at 1/4, 1/2, or 1 mile scale.
The system provides freeway exit information only in the U.S.
The route guidance information is automatically deleted when you reach your destination.
2.
Rotate i
to select a list item.
Press u
.
Move w
or y
to display information for different exits.
You can set the route to your destination.
2 Calculating the Route P. 106
117
Map Menu Traffic Rerouting™
Traffic Rerouting™
When driving to your destination, the system automatically searches for a faster route based on traffic flow information and traffic incidents.
1 Traffic Rerouting™
Automatic traffic rerouting may not provide a detour route depending on circumstances.
118
■
Traffic Rerouting™ Manually
H
ENTER button (on map)
Traffic Incidents
Manually avoid specific incidents and/or congestion on your route:
1.
Rotate i
to select an incident from the list. Press u .
The system displays the map screen and the incident location.
1 Traffic Rerouting™ Manually d
“Display traffic incidents” , d
“Display traffic list”
You can display traffic incidents and related information on the map screen using voice commands.
Map Menu Traffic Rerouting™
2.
Rotate u
.
i
to select Avoid . Press
Repeat step 1 to 2 as necessary.
3.
Move r
to select Reroute . Press u
.
The system recalculates a detour route that avoids the traffic incidents.
1 Traffic Rerouting™ Manually
You can choose to avoid up to 10 traffic incidents. It is not always possible for the system to calculate a route that avoids all traffic incidents or specific traffic incidents you select.
The “On Route” tab on the Traffic List screen is only available during route guidance.
You cannot select an incident to avoid from the
“All” tab.
You can also detour around a traffic incident manually if you encounter an unexpected obstacle.
119
Changing Your Route
H
MENU button (when en route)
This section describes how to alter your route, add an interim “waypoint” (pit stop), choose a different destination, cancel your current destination, and continue your trip after stopping.
Rotate i
to select an item. Press u
.
1 Changing Your Route d
“Display Destination” , d
“Display
Navigation” (when en route)
If you press the MENU button when not en route, the Destination Menu screen is displayed.
2 Entering a Destination P. 84
120
The following items are available:
• Voice : Select to hear the voice guidance when en route.
2 Listening to Voice Guidance P. 112
• Destination List : Shows a list of waypoints. You can delete waypoints or edit the order of them.
2 Editing the Destination List P. 126
• Pause Guidance : Pauses your current route.
• Resume Guidance : Resumes your current route. This item is displayed while the route guidance is paused.
• Cancel Route : Cancels the route guidance.
• View Routes : Displays three different routes.
Changing Your Route Pausing the Route
• Change Route Preference : Changes the route preferences (calculating method).
• Detour : Calculates a detour route.
• Avoid Streets : Avoids streets along your route.
Pausing the Route
H
MENU button (when en route)
Pause Guidance
Pause the route guidance and return to the map screen. The destination icons and all waypoint flags remain displayed on the map. Press the MENU button when en route and select Resume Guidance to resume the route guidance.
Canceling the Route
H
MENU button (when en route) Cancel Route
Cancel the route guidance and remove the destination and all waypoints from the destination list. The system then returns to the map screen.
1 Pausing the Route
You can also pause your route from the Map
Menu.
1 Canceling the Route
You can also cancel your route from the Map
Menu.
121
122
Changing Your Route Adding Waypoints
Adding Waypoints
Add up to four waypoints (pit stops) along the route to your destination.
Waypoints are displayed on the map screen as small, numbered red flags.
The route follows the waypoints in the order they are listed in the
Destination List.
1 Adding Waypoints
Waypoints allow you to stop for gas or food, for example, and then continue on to your destination.
Press the NAV button to return to the map screen without adding a waypoint at any time.
The search corridor used for adding waypoints can be adjusted.
2 Edit POI Search Radius Along Route P. 54
You can delete waypoints or edit the order of waypoints in the destination list.
2 Editing the Destination List P. 126
Changing Your Route Adding Waypoints
■
Adding Waypoints from the Route Menu
H
MENU button (when en route) Destination List Add New Destination
Find Along Route
1.
Rotate i
to select a search method to add a waypoint. Press u
.
1 Adding Waypoints
Search method
“Search around” method
“Search along” method
The following items are available:
• Search Around: Searches in a spiral pattern around the location you select.
• Search Along : Searches within a “corridor” on either side of the locations you select.
2.
Rotate i
to select a waypoint category (e.g., GAS STATION ).
Press u
.
Continued 123
124
Changing Your Route Adding Waypoints
3.
Rotate i
to select a place. Press u
.
The waypoint is added to the
Destination List.
4.
Rotate i
to select a location and move the order of destinations.
Press u
.
5.
Move r
and rotate i
to select
Start Route . Press u .
The route is automatically recalculated and displayed on the map screen.
Changing Your Route Adding Waypoints
■
Adding Waypoints from the Navigation Menu
H
MENU button (when en route) Destination List Add New Destination
Use Nav Menu
1.
Rotate i
to select a method to enter a waypoint.
2 Entering a Destination P. 84
A new destination is added to the end of the Destination list.
1 Adding Waypoints from the Navigation Menu
You can edit the order of waypoints and destination.
2 Editing the Destination List P. 126
2.
Move r
and rotate i
to select
Start Route . Press u
.
The route is automatically recalculated and displayed on the map screen.
125
126
Changing Your Route Editing the Destination List
Editing the Destination List
■
Editing the Order of Waypoints
H
MENU button (when en route) Destination List
1.
Move r
and rotate i
to select
Edit Order . Press u
.
1 Editing the Order of Waypoints
Move r
to rotate i
to select Show All on
Map to display the destination and waypoints on the map screen.
2.
Rotate i to select a list item to move. Press u
.
3.
Rotate i
to select a new location.
Press u
.
4.
Move r
and rotate i
to select
Start Route . Press u
.
The route is automatically recalculated and displayed on the map screen.
Changing Your Route Editing the Destination List
■
Deleting Waypoints
H
MENU button (when en route) Destination List
1.
Rotate i
to select a list item to delete. Press u
.
1 Deleting Waypoints
Move r
and rotate i
to select Delete All to delete the destination and all the waypoints.
Select Show on Map to display the waypoint on the map screen.
2.
Rotate i
to select Delete . Press u
.
3.
Rotate i
to select Yes . Press u
.
127
128
Changing Your Route Taking a Detour
Taking a Detour
H
MENU button (when en route) Detour
Calculate a detour route manually. The system attempts to calculate a new route by avoiding the next 5 miles (while on a freeway) or 1 mile (while on a surface street).
Avoiding Streets
H
MENU button (when en route) Avoid Streets
Select a street or streets along your route to avoid.
1.
Rotate i
to select the street you want to avoid. Press u
.
Repeat the procedure to avoid other streets.
1 Taking a Detour
The detour option is convenient if you encounter an unexpected obstacle such as a road closure or extremely heavy traffic congestion.
1 Avoiding Streets
Avoiding certain streets is convenient if you know of road construction, road closures, or excessive traffic along the route.
You cannot choose specific streets you want to use, only those to avoid. However, you can select intersections or waypoints (places/landmarks) that the system will use in your route.
You can store up to 10 streets to avoid. You cannot avoid your current street or the streets of your waypoint(s) or destination (system beeps if selected).
2.
Move r
to select Recalculate
Route . Press u
.
The system calculates a new route.
Changing Your Destination
There are several methods you can use to change the route destination.
Find Nearest Place
H
ENTER button (on map) Search Nearby
Search for the nearest place/landmark on the map screen and set it as your destination.
1.
Rotate i
to select Search
Nearby . Press u
.
2.
Rotate i
to select a category type. Press u
.
3.
Rotate i
to select a place. Press u
.
4.
Rotate i
to select Set as
Destination . Press u
.
5.
Move r
to select Clear Current
Route . Press u
.
The route is automatically recalculated and displayed on the map screen.
Rotate i
to edit the order to set the location as a new waypoint. Press u
.
1 Find Nearest Place d
“Find Nearest…”
The Find Nearest voice command is the fastest method of specifying a place/landmark as your destination. Many kinds of places can be found.
129
130
Changing Your Destination Selecting a Destination on the Map
Selecting a Destination on the Map
Select a new destination when en route by selecting a location on the map.
1.
Scroll the map to position the cursor over your desired destination, adjusting the map scale as necessary. Press u
.
If the address displayed is not the desired location, press the
BACK button and repeat the procedure.
2.
Rotate i to select Set as
Destination . Press u
.
2 Calculating the Route P. 106
1 Selecting a Destination on the Map
If there is more than one icon or street under the map cursor, you are prompted to select the item from a list.
Rotate i
to select an item. Press u
.
3.
Move r
to select Clear Current
Route . Press u
.
The route is automatically recalculated and displayed on the map screen.
Rotate i
to edit the order to set the location as a new waypoint. Press u
.
Changing Your Destination Entering a New Destination
Entering a New Destination
H
MENU button (when en route) Destination
Enter a new destination using the Destination Menu screen even when you are en route.
1.
Rotate i
to select a method to enter a new destination.
2 Entering a Destination P. 84
After entering a new destination, the address is displayed on the Calculate
Route screen.
2.
Rotate i
to select Set as
Destination . Press u
.
3.
Move r
to select Clear Current
Route . Press u
.
The route is automatically recalculated and displayed on the map screen.
Rotate i
to edit the order to set the location as a new waypoint. Press u
.
1 Entering a New Destination d
“Display Destination” , d
“Display
Navigation”
131
132
Resuming Your Trip
Stop your vehicle en route (e.g., to rest, stop for gas, etc.), and then continue on your route.
If you did not complete your route, the Continue Trip screen is displayed when you restart your vehicle.
Rotate i
to select Set as
Destination . Press u
.
You can continue on the same route.
Move w
to scroll the map around the destination.
Press the BACK button to cancel your destination.
• Route Preference : Move r
to select Route Preference to change the route preferences (calculating method).
• View Routes : Displays three different routes.
1 Resuming Your Trip
The Continue Trip screen has the same options as when you calculate a route.
2 Calculating the Route P. 106
You can also cancel your destination by pressing any hard button except the a
button
Search Nearby
You can find the nearest place/landmark (e.g., nearest gas station) by specifying a category.
Call
You can place a telephone call to the destination phone number.
2 Bluetooth ® HandsFreeLink® P. 202
Save to Address Book
You can add the destination address to the address book.
2 Adding an Address Book Entry P. 37
Edit/Delete Entry
You can edit or delete the address book entry.
2 Editing an Address Book Entry P. 39
Edit Home Entry
You can edit your home address entry.
Audio
This section describes how to operate the audio system. You can play music from a wide array of media sources, and control the audio system using the audio buttons, the Interface Dial, or voice control.
Audio System .................................................. 134
About Your Audio System.............................. 134
USB Port ........................................................ 135
Auxiliary Input Jack ........................................ 136
Audio System Theft Protection ....................... 137
Setting Audio Shortcuts ................................. 138
Audio Remote Controls .................................. 140
Steering Wheel Controls ................................ 140
Audio Settings ................................................. 141
Adjusting the Sound ...................................... 143
Playing FM/AM Radio ..................................... 145
Selecting FM/AM Mode.................................. 145
Audio Screen Control..................................... 145
Audio Menu .................................................. 147
Playing SiriusXM® Radio ................................ 151
Selecting SiriusXM® Mode............................. 151
Audio Screen Control..................................... 151
Audio Menu .................................................. 153
SiriusXM® Radio Service................................. 155
Playing a Disc ................................................... 156
Selecting Disc Mode ....................................... 156
Audio Screen Control ..................................... 157
Audio Menu................................................... 158
Recommended CDs........................................ 161
Playing Hard Disc Drive (HDD) Audio ............ 163
Selecting HDD Mode ...................................... 163
Recording a Music CD to HDD........................ 164
Audio Screen Control ..................................... 165
Audio Menu................................................... 166
Playing an iPod® ............................................. 175
Selecting iPod® Mode.................................... 176
Audio Screen Control ..................................... 177
Audio Menu................................................... 179
Song By Voice TM (SBV) .................................... 182
Playing Internet Radio ..................................... 187
Selecting Internet Radio Mode........................ 187
Pandora® Menu ............................................ 188
Aha TM Radio Menu......................................... 189
Playing a USB Flash Drive ............................... 191
Selecting USB Mode....................................... 192
Audio Screen Control..................................... 193
Audio Menu .................................................. 194
Playing Bluetooth ® Audio ............................. 197
Selecting Bluetooth ® Audio Mode ................ 197
Audio Screen Control..................................... 198
133
134
Audio System
About Your Audio System
The audio system features AM/FM radio and the SiriusXM® Radio service. It can also play audio CDs, WMA/MP3/AAC files, Hard Disc Drive (HDD) audio, USB flash drives, and iPod®, iPhone® and Bluetooth ® devices.
You can operate the audio system from the buttons and switches on the panel, the icons on the touchscreen interface.
Remote Controls iPod® USB Flash Drive
1 About Your Audio System
SiriusXM® Radio is available on a subscription basis only. For more information on SiriusXM®
Radio, contact a dealer.
2 SiriusXM® Radio Service P. 155
SiriusXM® Radio is available in the United States and Canada, except Hawaii, Alaska, and Puerto
Rico.
SiriusXM® is a registered trademark of Sirius XM
Radio, Inc.
Video CDs, DVDs, and 3-inch (8-cm) mini CDs are not supported.
iPod® and iPhone® are registered trademarks owned by Apple Inc.
State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.
When the screen is viewed through polarized sunglasses, a rainbow pattern may appear on the screen due to optical characteristics of the screen. If this is disturbing, please operate the screen without polarized sunglasses.
USB Port
Audio System USB Port
Install the iPod® or iPhone® dock connector or the USB flash drive to the USB port.
1 USB Port
• Do not leave the iPod® or USB flash drive in the vehicle. Direct sunlight and high temperatures may damage it.
• Do not connect the iPod® or USB flash drive using a hub.
• Do not use a device such as a card reader or hard disk drive, as the device or your files may be damaged.
• We recommend backing up your data before using the device in your vehicle.
• Displayed messages may vary depending on the device model and software version.
If the audio system does not recognize the iPod®, try reconnecting it a few times or reboot the device. To reboot, follow the manufacturer’s instructions provided with the iPod® or visit www.apple.com/ipod .
135
136
Audio System Auxiliary Input Jack
Auxiliary Input Jack
Use the jack to connect standard audio devices.
1.
Open the AUX cover.
2.
Connect a standard audio device to the input jack using a 1/8 inch (3.5 mm) stereo miniplug.
The audio system automatically switches to the AUX mode.
1 Auxiliary Input Jack
You can return to the AUX mode by selecting
Change Source on the Audio menu screen or
Audio Source on the touchscreen.
Audio System Theft Protection
The audio system is disabled when it is disconnected from the power source, such as when the battery is disconnected or goes dead. In certain conditions, the system may display Enter code . If this occurs, reactivate the audio system.
■
Reactivate the audio system
1.
Set the power mode to ON.
2.
Turn on the audio system.
3.
Press and hold the audio system power button for more than two seconds.
The audio system is reactivated when the audio control unit establishes a connection with the vehicle control unit. If the control unit fails to recognize the audio unit, you must go to a dealer and have the audio unit checked.
Audio System Audio System Theft Protection
137
138
Audio System Setting Audio Shortcuts
Setting Audio Shortcuts
You can store up to six radio stations, and HDD audio album/play lists when playing
AM, FM, or SiriusXM® Radio, or HDD audio.
■
Storing a station or song
1.
Select Shortcuts .
2.
Tune to a radio station or select a song.
2
2
Playing SiriusXM® Radio P. 151
2
3.
Select Edit or No Entry.
If you select No Entry, go to step
5.
4.
Select Add.
5.
Select the preset icon you want to store the station or song to.
1 Setting Audio Shortcuts
You can also preset a station or song by pressing and holding the preset icon you want to store that station or song after step 3.
■
Deleting a preset station or song
1.
Select Shortcuts .
2.
Select Edit .
3.
Select Delete .
4.
Select the preset icon with the radio station or a song you want to delete.
Audio System Setting Audio Shortcuts
139
Audio Remote Controls
Steering Wheel Controls
Allows you to operate the audio system while driving.
VOL Button MODE Button
MODE Button
Cycles through the audio modes as follows:
FM AM SiriusXM® CD HDD
USB iPod® Bluetooth ® Audio
Pandora® Aha TM AUX
CH Button
140
VOL Button
Press
R
: To increase the volume.
Press
U
: To decrease the volume.
CH Button
• When listening to the radio
Press
N
: To select the next preset radio station.
Press
B
: To select the previous preset radio station.
Press and hold
N
: To scan to the next strong station.
Press and hold
B
: To scan to the previous strong station.
• When listening to a CD, HDD, iPod®, USB flash drive, or Bluetooth ® Audio
Press N : To skip to the next song.
Press
B
: To go back to the beginning of the current or previous song.
Press and hold
N
: To go to the group up. ( Bluetooth ® Audio only)
Press and hold
B
: To go to the group down. ( Bluetooth ® Audio only)
• When listening to a CD, HDD or USB flash drive
Press and hold
N
: To skip to the next folder.
Press and hold
B
: To go back to the previous folder.
• When listening to Pandora® or Aha TM
Press N : To skip to the next song.
Press and hold
N
: To select the next station.
Press and hold
B
: To select the previous station.
1 Audio Remote Controls
The CD mode appears only when a CD is loaded.
The USB mode, iPod® mode, Bluetooth ® Audio mode, Pandora® mode, and Aha TM mode appear when a connection (Bluetooth or USB) is established with a device.
Audio Settings
H
SETTINGS button
Audio Settings
Rotate i
to select an item. Press u
.
The following items are available:
• Sound : Adjusts the settings of the audio speaker’s sound.
• Source Select Popup: Selects whether the list of selectable audio sources comes on when the AUDIO button is pressed.
• HD Radio Mode (AM/FM mode): Selects whether the audio system automatically switches to the digital radio waves or receives the analogue waves only.
• Cover Art (CD (MP3/WMA/AAC), iPod®, USB, Pandora® or Aha™ mode): Turns on and off the cover art display.
• Connect Bluetooth Audio Device ( Bluetooth ® Audio, Pandora® or Aha™ mode): Connects, disconnects or pairs a Bluetooth ® Audio device to HFL.
• Recording from CD (CD mode) : Selects whether the songs on music CDs are automatically recorded to the HDD.
• Recording Quality (CD mode): Selects the quality of the music files recorded to the HDD.
• HDD Info (HDD mode) : Displays the HDD capacity.
Continued 141
142
Audio Settings Steering Wheel Controls
• Update Gracenote Album Info (CD or HDD mode): Updates the Gracenote®
Album Info (Gracenote® Media Database) from CD or from USB.
2 Updating Gracenote® Album Info P. 173
• DVD Auto Play (DVD mode): Turns the auto play feature on or off.
• Audio Language (DVD mode): Selects a language for the audio that is available on the DVD.
• Subtitle Language (DVD mode): Selects a language for the subtitle that is available on the DVD.
• Menu Language (DVD mode): Selects a language for the DVD menu that is available on the DVD.
• Angle Mark (DVD mode): Sets whether to display the angle symbol.
• Dynamic Range (DVD mode): Sets whether to control the range of the loud and low sounds.
• Delete all HDD Data (HDD mode) : Resets all the menu and customized settings, and delete all music data on the HDD.
• Default : Cancels/Resets all customized items in the Audio Settings group as default.
Audio Settings Adjusting the Sound
Adjusting the Sound
Interface Dial
H
SETTINGS button Audio Settings Sound
1.
Rotate i
to select the sound mode to adjust. Press u
.
2.
Rotate i
to adjust the desired level. Press u
.
Bass
Treble
Fader
Balance
Center*
Subwoofer
SVC
Speed-sensitive
Volume
Compensation
DTS Neural*
Surround
1 Adjusting the Sound
The SVC has four modes: Off , Low , Mid , and
High.
SVC adjusts the volume level based on the vehicle speed. As you go faster, audio volume increases. As you slow down, audio volume decreases.
DTS Neural Surround is a trademark of DTS, Inc.
When available, DTS Neural Surround converts stereo sound into surround sound.
*: Not available on all models
Continued 143
144
Audio Settings Adjusting the Sound
Touchscreen
1.
Select More .
2.
Select Sound Settings .
3.
Use
N
,
B
or other icon to adjust the setting.
1 Adjusting the Sound
Select Off , Low , Mid or High for the SVC setting.
Select X to go back to the previous screen.
Use the / / / icons to turn the page.
Playing FM/AM Radio
Selecting FM/AM Mode
Interface Dial
1.
Press the MENU button.(in AUDIO mode)
2.
Rotate i to select Change Source . Press u
.
3.
Rotate i to select the frequency band (FM, AM). Press u
.
The band and frequency are displayed on the navigation screen.
Touchscreen
1.
Select Audio Source .
2.
Select the frequency band (AM, FM) icon.
The band and frequency are displayed on the touchscreen.
Audio Screen Control
Control the audio system through the navigation screen and touchscreen.
Frequency band Interface Dial
Rotate i
to select a preset station.
Press u
.
Press and hold u for a few seconds to store the current station.
Press MENU button to display the menu items.
2
Preset stations
Continued
1 Playing FM/AM Radio d
“Display audio screen”
You can control the AM/FM radio using voice commands.
2 Voice Control Operation P. 5
The ST indicator appears on the display indicating stereo FM broadcasts.
Stereo reproduction in AM is not available.
The radio can receive the complete AM and FM bands:
AM band: 530 to 1710 kHz
FM band: 87.7 to 107.9 MHz
You can store 6 AM stations and 12 FM stations into the preset memory.
145
Playing FM/AM Radio Audio Screen Control
Touchscreen
Select b or n to tune the radio frequency.
Select c or x to search up and down the selected band for a station with a strong signal.
Select Presets to listen a preset station.
Select and hold the preset number you want to store that station.
Select More to display the menu item.
Select TAG to tag the song if it is played on an HD Radio TM station*.
The iPod®/ iPhone® should be connected to the audio system to store the tagged song information on your device.
146
*: Not available on all models
Audio Menu
Interface Dial
H
MENU button (in FM/AM mode)
Rotate i
to select an item. Press u
.
Playing FM/AM Radio Audio Menu
The following items are available:
• Scan : Scans for stations with a strong signal in the current band and plays a 10- second sample. Select Cancel Scan to stop scanning and play the current selection.
• Station List: Displays the stored station list.
• Save Preset : Stores the station into the preset memory.
• Change Source : Changes the audio source mode.
Continued 147
Playing FM/AM Radio Audio Menu
• Radio Text : Displays the text information broadcast by the current RDS station.
• Tag Song* : Displays the TAG information saved to the audio system when an HD
Radio TM station is selected.
• Tagged Song List* : You can store the TAG information in the connected iPod®/ iPhone®. If the iPod®/iPhone® is not connected to the audio system, the information is stored in the audio unit temporarily, then once the device is connected to the system, data is transferred to the iPod®/iPhone®.
• Tune/Seek : Tunes the radio to the frequency you select. Rotate i
to select a frequency, then Move u
.
• HD subchannel* : Displays the subchannel list when an HD Radio TM station is selected.
1 Audio Menu iTunes Tagging*
“iTunes” in “iTunes Tagging” is a trademark of
Apple Inc.
When an HD Radio TM station is selected, the HD indicator appears on the navigation screen and touchscreen.
If you want to have the information on the song played from the HD Radio TM station, select TAG in touchscreen or select Tag Song in the menu with Interface dial.
If iPod®/iPhone® is connected, the tag is transferred to the connected device immediately, otherwise the tag will be transferred when the device will be connected and select Tag Song in the menu with Interface dial.
148
*: Not available on all models
Touchscreen
1.
Select More .
2.
Select a setting item.
The following items are available:
• Sound Settings : Displays the sound preferences screen.
• Scan: Scans for stations with a strong signal in the current band and plays a 10- second sample. Select Cancel Scan to stop scanning and play the current selection.
• Save Preset : Stores the station into the preset memory.
• Screen Settings : Adjusts the screen’s preferences.
2 Changing the Screen Settings P. 82
• HD subchannel* : Displays the subchannel list when an HD Radio TM station is selected.
*: Not available on all models
Playing FM/AM Radio Audio Menu
149
150
Playing FM/AM Radio Audio Menu
■
Radio Data System
H
MENU button (in FM mode) Station List
Provides text data information related to your selected RDS-capable FM station.
■ To find an RDS station from
Station List
Rotate i
to select the station. Press u
.
■ Manual update
Updates your available station list at any time.
Rotate i
to select Refresh . Press u
.
Playing SiriusXM® Radio
Selecting SiriusXM® Mode
Interface Dial
1.
Press the MENU button. (in AUDIO mode)
2.
Rotate i to select Change Source . Press u
.
3.
Rotate i to select XM . Press u
.
The band and channel are displayed on the navigation screen.
Touchscreen
1.
Select Audio Source .
2.
Select the SiriusXM® icon.
The band and channel are displayed on the touchscreen.
Audio Screen Control
Control the audio system through the navigation screen and touchscreen.
Interface Dial
Rotate i
to select a preset channel.
Press u
.
Press and hold u for a few seconds to store the current channel.
Press MENU button to display the menu items.
1 Playing SiriusXM® Radio
You can control the SiriusXM® Radio using voice commands.
2 Voice Control Operation P. 5
In the channel mode, all available channels are selectable. In the category mode, you can select a channel within a category (Jazz, Rock, Classical, etc.).
There may be instances when SiriusXM® Radio does not broadcast all the data fields (artist name, title). This does not indicate a problem with your audio system.
You can store 12 SiriusXM® stations into the preset memory.
SiriusXM® Radio stations load in ascending order, which can take about a minute. Once they have loaded, you can scroll up or down to make your selections.
Continued 151
152
Playing SiriusXM® Radio Audio Screen Control
Touchscreen
Select b or n to display and select an SiriusXM® Radio category.
Select c or x to the previous or next channel.
In channel mode, select and hold to change the channel rapidly.
Select Presets to listen a preset station.
Select and hold the preset number you want to store that channel on the preset screen.
Select More to display the menu item.
Audio Menu
Interface Dial
H
MENU button (in SiriusXM® mode)
Rotate i
to select an item. Press u
.
Playing SiriusXM® Radio Audio Menu
The following items are available:
• Scan : Scans for channels in the selected mode and plays a 10- second sample.
Select Cancel Scan to stop scanning and play the current selection.
• Save Preset : Stores the station into the preset memory.
• Change Source : Changes the audio source mode.
• Channel List : Displays the list of available channels. Rotate i
to select a channel.
• XM Tune Mode :
Channel Mode : Scans to select all available channels.
Category Mode : Scans to select a channel within a category (Jazz, Rock, Classic, etc.).
Continued 153
154
Playing SiriusXM® Radio Audio Menu
Touchscreen
1.
Select More .
2.
Select a setting item.
The following items are available:
• Sound Settings : Displays the sound preferences screen.
• Save Preset : Stores the station into the preset memory.
• Screen Settings : Adjusts the screen’s preferences.
2 Changing the Screen Settings P. 82
• Scan : Scans for channels with a strong signal in the selected mode and plays a 10- second sample. Select Cancel Scan to stop scanning and play the current selection.
• XM tune mode : Sets the scan mode.
Channel : Scans to select all available channels.
Category : Scans to select a channel within a category (Jazz, Rock, Classic, etc.).
Playing SiriusXM® Radio SiriusXM® Radio Service
SiriusXM® Radio Service
■
Subscribing to SiriusXM® Radio
1.
You need your radio ID ready before registering for subscription. To see the ID in the display: Select c on the touchscreen until channel 0 appears.
2.
Have your radio ID and credit card number ready, and either call or visit the
SiriusXM® website to subscribe.
■
Receiving SiriusXM® Radio
Switch to the SiriusXM® mode by pressing the SOURCE button repeatedly or operating the touchscreen, and stay in this mode for about 30 minutes until the service is activated. Make sure your vehicle is in an open area with good reception.
■
SiriusXM® Radio Display Messages
Loading:
SiriusXM® is loading the audio or program information.
Ch off air:
The channel is not currently broadcasting.
Ch unauthorized:
SiriusXM® Radio is receiving information update from the network.
No signal:
The signal is too weak in the current location.
Ch unavailable:
No such channel exists, the channel is not part of your subscription, or the artist or title information is unavailable.
Check antenna:
There is a problem with the SiriusXM® antenna. Contact a dealer.
1 Subscribing to SiriusXM® Radio
Contact Information for SiriusXM® Radio:
SiriusXM® Radio at www.siriusxm.com
or (800)
852-9696
1 Receiving SiriusXM® Radio
The SiriusXM® satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions.
Satellite signals are more likely to be blocked by tall buildings and mountains the farther north you travel from the equator.
You may experience reception problems under the following circumstances:
• In a location with an obstruction to the south of your vehicle.
• In tunnels
• On the lower level of a multi-tiered road
• Large items carried on the roof rack
155
156
Playing a Disc
Your audio system supports audio CDs, CD-Rs and CD-RWs in either MP3, WMA, or
AAC format. With the CD loaded, select the CD mode.
Selecting Disc Mode
1.
Insert a disc into the disc slot.
The disc automatically being playing.
Interface Dial
2.
Press the MENU button. (in AUDIO mode)
3.
Rotate i
to select Change Source . Press u
.
4.
Rotate i
to select CD . Press u
.
Touchscreen
2.
Select Audio Source .
3.
Select the CD icon.
1 Playing a Disc
NOTICE
Do not use CDs with adhesive labels. The label can cause the CD to jam in the unit.
WMA and ACC files protected by digital rights management (DRM) cannot be played.
The audio system displays Unplayable File, then skips to the next file.
Text data appears on the display under the following circumstances:
• When you select a new folder, file, or track.
• When you change the audio mode to CD.
• When you insert a CD.
If you eject the CD but do not remove it from the slot, the system reloads the CD automatically after several seconds.
You can control a CD audio using voice commands.
2 Voice Control Operation P. 5
Audio Screen Control
Control the audio system through the navigation screen and touchscreen.
Interface Dial
1.
Rotate i
or press u
to display the song list.
2.
Rotate i
, move w
or y
to select a file from the list. Press u
.
Press MENU button to display the menu items
Track list
Touchscreen
1.
Select n
to skip to the next folder, and b
to skip to the beginning of the previous folder in MP3, WMA, or AAC.
2.
Select c
or x
to change tracks
(files in MP3, WMA, or AAC).
Select and hold to move rapidly within a track/file.
Select More to display the menu item.
Playing a Disc Audio Screen Control
157
Playing a Disc Audio Menu
Audio Menu
Interface Dial
H
MENU button (in CD mode)
Rotate i
select an item. Press u
.
158
The following items are available, depending on the type of disc:
• Scan:
Scan Folders (MP3/WMA/AAC): Provides 10-second sampling of the first file in each of the main folders.
Scan Tracks : Provides 10-second sampling of all tracks on the CD (all files in the current folder in MP3, WMA, or AAC).
• Random/Repeat:
Repeat Folder (MP3/WMA/AAC): Repeats all files in the current folder.
Repeat Track : Repeats the current track/file.
Random in Folder (MP3/WMA/AAC): Plays all files in the current folder in random order.
Random All Tracks : Plays all tracks/files in random order.
• Change Source : Changes the audio source mode.
• Rec to HDD : Records a music CD onto the HDD for playback using HDD Audio.
2 Recording a Music CD to HDD P. 164
• Music Search: Selects a file from the Music Search list.
2 How to Select a File from the Music Search List (MP3/WMA/AAC) P. 160
Touchscreen
1.
Select More .
2.
Select a setting item.
The following items are available, depending on the type of disc:
• Sound Settings: Displays the sound preferences screen.
• Random/Repeat:
Random All Tracks : Plays all tracks/files in random order.
Repeat Track : Repeats the current track/file.
• Scan : Provides 10-second sampling of all tracks on the CD (all files in the current folder in MP3, WMA, or AAC).
• Screen Settings : Displays the screen preferences screen.
2 Changing the Screen Settings P. 82
Playing a Disc Audio Menu
159
160
Playing a Disc Audio Menu
■
How to Select a File from the Music Search List (MP3/WMA/AAC)
H
MENU button (in CD mode) Music Search
Rotate i
, move w
or y
to select a file from the Music Search list. Press u
.
Recommended CDs
• Use only high-quality CD-R or CD-RW discs labeled for audio use.
• Use only CD-R or CD-RW discs on which the recordings are closed.
• Play only standard round-shaped CDs.
The CD packages or jackets should have one of these marks.
Also includes:
■
CDs with MP3, WMA or AAC files
• Some software files may not allow for audio play or text data display.
• Some versions of MP3, WMA or AAC formats may be unsupported.
Playing a Disc Recommended CDs
1 Recommended CDs
A Dual-disc cannot play on this audio unit. If recorded under certain conditions, a CD-R or CD-
RW may not play either.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other
U.S. and worldwide patents issued & pending.
DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights
Reserved.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS Neural
Surround is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights
Reserved.
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, MLP Lossless and the double-D symbol are trademarks of Dolby
Laboratories.
161
162
Playing a Disc Recommended CDs
■ Protecting CDs
Follow these precautions when handling or storing CDs:
• Store a CD in its case when it is not being played.
• When wiping a CD, use a soft clean cloth from the center to the outside edge.
• Handle a CD by its edge. Never touch either surface.
• Never insert foreign objects into the CD player.
• Keep CDs out of direct sunlight and extreme heat.
• Do not place stabilizer rings or labels on the CD.
• Avoid fingerprints, liquids, and felt-tip pens on the CD.
1 Protecting CDs
NOTICE
Do not insert a damaged CD. It may be stuck inside and damage the audio unit.
Examples:
• Bubbled, wrinkled, labeled, and excessively thick CDs
Bubbled/
Wrinkled
With Label/
Sticker
Using
Printer Label
Kit
Sealed With Plastic Ring
• Damaged CDs • Poor quality
CDs
Chipped/
Cracked
• Small CDs
Warped
3-inch
(8-cm)
CD
Burrs
Playing Hard Disc Drive (HDD) Audio
The Hard Disc Drive (HDD) Audio function plays tracks from music CDs that have been recorded onto the built-in HDD. You can arrange the tracks in playlists or play the tracks using various search methods.
Selecting HDD Mode
Interface Dial
1.
Press the MENU button. (in AUDIO mode)
2.
Rotate i to select Change Source.
Press u
.
3.
Rotate to select HDD . Press to play tracks stored on the HDD.
Title information is displayed if found in the Gracenote® Album Info
(Gracenote® Media Database) stored on the HDD.
The HDD has two types of playlists: original playlists and user playlists. An original playlist is automatically created for each album when a music CD is recorded. You can customize up to six user playlists provided on the HDD by adding tracks from your original playlists.
1 Playing Hard Disc Drive (HDD) Audio
You can control the HDD audio using voice commands.
2 Voice Control Operation P. 5
2 Song By Voice TM (SBV) P. 182
Music tracks recorded on HDD cannot be recorded onto CDs or other devices.
Tracks are recorded at four times the playback speed using ultra-efficient compression technology; therefore, sound quality may vary slightly from the original.
If the HDD is ever replaced, all music data is lost and cannot be recovered.
If there is a problem, you may see an error message on the display.
2 Hard Disc Drive (HDD) Audio P. 284
Touchscreen
1.
Select Audio Source .
2.
Select the HDD icon to play tracks stored on the HDD.
163
164
Playing Hard Disc Drive (HDD) Audio Recording a Music CD to HDD
Recording a Music CD to HDD
The songs on music CDs are automatically recorded by factory default to the HDD the first time you play each disc. You can then play the songs directly from the HDD.
Recording indicator
■
Stopping Recording
1.
Press the MENU button. (in CD mode)
2.
Rotate i
to select Cancel Record to HDD . Press u
.
■
Recording a CD Manually
1.
Press the MENU button. (in CD mode)
2.
Rotate i
to select Rec to HDD . Press u
.
Recording
Ready to record
1 Recording a Music CD to HDD
You can add tracks to user playlists, where you can mix and match tracks from other CDs recorded on the HDD.
2 Editing an Album or Playlist P. 169
2 Editing Track Information P. 171
If you stop the engine or the power system is turned off while recording a CD, there may be pauses between songs when you play back from the HDD.
Repeat, random, and scan functions are not available during recording.
You can play music from other sources (e.g.,
SiriusXM®, HDD, etc.) while recording.
Please note that there is no compensation offered in the case of unsuccessful recording of audio data or the loss of audio data due to any cause whatsoever.
Clearing the HDD
Any music tracks stored on the HDD can be deleted.
Playing Hard Disc Drive (HDD) Audio Audio Screen Control
Audio Screen Control
Control the audio system through the navigation screen and touchscreen.
Interface Dial
1.
Rotate i
or u
press to display the song list.
2.
Rotate i
, move w
or y
to select a track from the list. Press u
.
Press MENU button to display the menu items
Touchscreen
1.
Select n
skip to the next playlist/ album, and b
to skip to the beginning of the previous playlist/ album.
2.
Select c
or x
to change tracks.
Select and hold to move rapidly within a track.
Select More to display the menu item.
165
Playing Hard Disc Drive (HDD) Audio Audio Menu
Audio Menu
Interface Dial
H
MENU button (in HDD mode)
Rotate i
to select an item. Press u
.
166
The following items are available:
• Scan:
Scan Albums: Provides 10-second sampling of the first track in each album.
Scan Tracks: Provides 10-second sampling of all tracks on HDD.
• Music Search: Selects a file from the Music Search list.
2 How to Select a Track from the Music Search List P. 168
• Change Source: Changes the audio source mode.
• Random/Repeat: The following menu items vary depending on the category you selected by the Music Search list.
Repeat Artist: Repeats all tracks in the current artist.
Repeat Album: Repeats all tracks in the current album.
Repeat Track: Repeats the current track.
Random in Artist: Plays all tracks in the current artist in random order.
Random in Album: Plays all tracks in the current album in random order.
Random All Tracks: Plays all tracks in random order.
• Edit/Delete: Change the playlist name, album name, genre, and track order of the current playlist. You can also delete tracks, playlists, and albums.
Touchscreen
1.
Select More .
2.
Select a setting item.
The following items are available:
• Sound Settings: Displays the sound preferences screen.
• Random/Repeat: The following menu items vary depending on the category you selected by the Music Search list.
Repeat Artist: Repeats all tracks in the current artist.
Repeat Album: Repeats all tracks in the current album.
Repeat Track: Repeats the current track.
Random in Artist: Plays all tracks in the current artist in random order.
Random in Album: Plays all tracks in the current album in random order.
Random All Tracks: Plays all tracks in random order.
• Scan:
Scan Albums: Provides 10-second sampling of the first track in each album.
Scan Tracks: Provides 10-second sampling of all tracks on HDD.
• Screen Settings: Displays the screen preferences screen.
2 Changing the Screen Settings P. 82
Playing Hard Disc Drive (HDD) Audio Audio Menu
167
168
Playing Hard Disc Drive (HDD) Audio Audio Menu
■
How to Select a Track from the Music Search List
H
MENU button (in HDD mode) Music Search
1.
Move w
or y
to select a search category. Press u
.
2.
Rotate i
to select a track from the Music Search list. Press u
.
Playing Hard Disc Drive (HDD) Audio Audio Menu
■
Editing an Album or Playlist
H
MENU button (in HDD mode) Edit/Delete
1.
Rotate i
to select Albums or
Playlist . Press u
.
2.
Rotate i
to select an album or playlist that you want edit or delete. Press u
.
The pop-up menu appears on the screen.
3.
Rotate i to select an item. Press u
.
The following items are available:
• Edit Name: Enter a new name using the interface dial or the touchscreen.
• Delete: Deletes the selected album or playlist.
• List Tracks: Change the track title, artist name, genre and composer. You can also delete tracks.
1 Editing an Album or Playlist
The maximum number of songs in each of the six user playlists is 999. Adding new songs overwrites the oldest songs.
The maximum number of original playlists is 999 with a maximum of 99 songs in each playlist.
Each album CD counts as an original playlist.
Adding a track from a user playlist into the same user playlist will cause the track to appear twice in the playlist.
Deleting an album (original playlist) also deletes the album tracks you have stored in any user playlists.
Deleting a user playlist or deleting all tracks from a user playlist does not remove the playlist folder.
The folder retains the playlist name and artist information.
169
170
Playing Hard Disc Drive (HDD) Audio Audio Menu
■
Creating a new Playlist
H
MENU button (in HDD mode) Edit/Delete Playlists Create New Playlist
1.
Enter the playlist name using the interface dial or the touchscreen.
2.
Select tracks from the music search list.
■
Editing Track Information
H
MENU button (in HDD mode) Edit/Delete Tracks
Change the track title, artist name, genre and composer. You can also delete tracks.
Rotate i
select a track you want to edit or delete. Press u
.
The pop-up menu appears on the screen.
Playing Hard Disc Drive (HDD) Audio Audio Menu
The following items are available:
• Edit Name: Enter the track information (track name, track artist, etc.) using the interface dial or the touchscreen.
• Delete: Deletes a track.
171
172
Playing Hard Disc Drive (HDD) Audio Audio Menu
■
Displaying Music Information
H
MENU button (in HDD mode) Edit/Delete
Music information (album name, artist name, genre) can be acquired by accessing the Gracenote® Album Info.
1.
Rotate i
to select Albums . Press u
.
2.
Rotate i
to select an album that you want edit or delete. Press u
.
The pop-up menu appears on the screen.
3.
Rotate i
to select Edit Name .
Press u
.
4.
Move r
to select Get Music Info .
Press u
.
The system starts to access the
Gracenote® Album Info.
Playing Hard Disc Drive (HDD) Audio Audio Menu
■
Updating Gracenote® Album Info
H
SETTINGS button (in HDD mode) Audio Settings
Update the Gracenote® Album Info (Gracenote® Media Database) that is included with the navigation system.
1.
Insert the update disc into the disc slot or connect the USB flash drive that includes the update.
2.
Rotate i
to select Update
Gracenote Album Info . Press u
.
1 Updating Gracenote® Album Info
To acquire updated files:
• Consult a dealer.
• Visit http://www.navteq.com/gracenote/ honda .
Once you perform an update, any information you edited before will be overwritten or erased.
3.
Rotate i
to select Update by CD or Update by USB . Press u
.
The system starts updating and the confirmation message appears on the screen. Press to finish u
.
173
174
Playing Hard Disc Drive (HDD) Audio Audio Menu
■
Deleting all HDD Data
H
SETTINGS button Audio Settings Delete all HDD Data
Delete all music data on the HDD.
Rotate i
to select Yes . Press u
.
Playing an iPod®
■
Connecting an iPod®
1.
Open the USB cover.
2.
Install the iPod® dock connector to the USB connector.
■
Model Compatibility
Model iPod (5th generation) iPod classic 80GB/160GB (launch in 2007) iPod classic 120GB (launch in 2008) iPod classic 160GB (launch in 2009) iPod nano (1st to 6th generation) launch in 2010 iPod touch (1st to 4th generation) launch in 2010 iPhone 3G/iPhone 3GS/iPhone 4/iPhone 4S
1 Connecting an iPod®
• Do not connect your iPod® using a hub.
• Do not use a device such as a card reader or hard disk drive, as the device or your tracks may be damaged.
• We recommend backing up your data before using the device in your vehicle.
• Displayed messages may vary depending on the device model and software version.
Your audio system may not work with all software versions of these devices.
If the audio system does not recognize your iPod®, try reconnecting it a few times or reboot the device.
State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.
175
176
Playing an iPod® Selecting iPod® Mode
Selecting iPod® Mode
1.
Connect the iPod® to the USB adapter cable in the console compartment.
Interface Dial
2.
Press the MENU button. (in AUDIO mode)
3.
Rotate i
, select Change Source . Press u
.
4.
Rotate i
, select iPod . Press u
.
Touchscreen
2.
Select Audio Source .
3.
Select the iPod icon.
1 Playing an iPod®
You can control an iPod® using voice commands.
2 Voice Control Operation P. 5
Available operating functions vary on models or versions. Some functions may not be available on the vehicle’s audio system.
If there is a problem, you may see an error message on the navigation screen.
2 iPod®/USB Flash Drive P. 285
Playing an iPod® Audio Screen Control
Audio Screen Control
Control the audio system through the navigation screen and touchscreen.
Interface Dial
1.
Rotate i
or press u o display the song list.
2.
Rotate i
, move w
or y
to select a song from the list. Press u
.
Press MENU button to display the menu items.
Track list
1 Audio Screen Control
This function may not be available depending on models or versions.
Select r
to go back to the previous screen.
Continued 177
178
Playing an iPod® Audio Screen Control
Touchscreen
Album Bar
Select an album image.
Album Image
Select the album bar.
1.
Select the album bar.
The image of the current album is displayed.
2.
Select c
or x
to search for an album.
When the album image you are looking for appears, select it to play.
Select More to display the menu item.
Audio Menu
Interface Dial
H
MENU button (in iPod® mode)
Rotate i
to select an item. Press u
.
Playing an iPod® Audio Menu
The following items are available:
• Music Search: Selects a song from the Music Search list.
2 How to Select a Song from the Music Search List P. 181
• Change Source : Changes the audio source mode.
• Shuffle/Repeat:
Repeat Song: Repeats the current track.
Shuffle Albums: Plays all available albums in a selected list (playlists, artists, albums, songs, genres, or composers) in random order.
Shuffle All Songs: Plays all available files in a selected list (playlists, artists, albums, songs, genres, or composers) in random order.
Continued 179
180
Playing an iPod® Audio Menu
Touchscreen
1.
Select More .
2.
Select a setting item.
The following items are available:
• Sound Settings: Displays the sound preferences screen.
• Shuffle/Repeat:
Repeat Song: Repeats the current track.
Shuffle Albums: Plays all available albums in a selected list (playlists, artists, albums, songs, genres, or composers) in random order.
Shuffle All Songs: Plays all available files in a selected list (playlists, artists, albums, songs, genres, or composers) in random order.
• Screen Settings: Displays the screen preferences screen.
2 Changing the Screen Settings P. 82
■
How to Select a Song from the Music Search List
H
MENU button (in iPod® mode) Music Search
1.
Move w
or y
to select a search category. Press u
.
2.
Rotate i
to select a file from the
Music Search list. Press u
.
Playing an iPod® Audio Menu
181
182
Playing an iPod® Song By Voice TM (SBV)
Song By Voice
TM
(SBV)
Use SBV to search for and play music from your HDD or iPod® using voice commands.
■
Settings Song By Voice
TM
(SBV)
H
SETTINGS button System Settings Song by Voice
Rotate i
to select On or Off . Press u
.
The following items are available:
• On (factory default): Song By Voice commands are available.
• Off : Disable the feature.
Playing an iPod® Song By Voice TM (SBV)
■
Searching for music using Song By Voice
TM
(SBV)
1.
Set the Song by Voice setting to
On .
2.
Press the d
(Talk) button and say
“Music Search” to activate the SBV feature for the HDD and iPod®.
3.
Press the d
button and say a command.
Example 1: Say “(List) ‘Artist A’“ to view a list of songs by that artist. Select the desired song to start playing.
Example 2: Say “Play ‘Artist A’“ to start playing songs by that artist.
4.
To cancel SBV, press the
J
(hang-up/back) button on the steering wheel. The selected song continues playing.
1 Searching for music using Song By Voice TM (SBV)
Song By Voice TM Commands List
2 Song By Voice TM commands P. 310
NOTE:
Song By Voice TM commands are available for tracks stored on the HDD or iPod®.
You can add phonetic modifications of difficult words so that it is easier for SBV to recognize artists, songs, albums, and composers in voice commands.
2 Phonetic Modification P. 184
SBV may not be able to recognize languages other than English for the artist name, song title, album title, and composers.
Once you have canceled this mode, you need to press the d
button and say “Music Search” again to re-activate this mode.
183
184
Playing an iPod® Song By Voice TM (SBV)
■
Phonetic Modification
H
SETTINGS button System Settings Song by Voice Phonetic Modification
Add phonetic modifications of difficult or foreign words so that it is easier for SBV to recognize artists, songs, albums, and composers in voice commands when searching for music on the HDD or iPod®.
1.
Move u
and i
rotate to select
New Modification . Press u
.
1 Phonetic Modification
Phonetic Modification is grayed out when Song
By Voice is set to Off .
You can store up to 2,000 phonetic modification items.
2.
Rotate i
to select HDD or iPod .
Press u
.
3.
Rotate i
to select the item to modify (e.g., Artist ). Press u
.
The list of the selected item appears on the screen.
4.
Rotate i
to select an entry (e.g.,
No Name ). Press u
.
The pop-up menu appears on the screen.
5.
Rotate i
to select Modify . Press u
.
The listen to the current phonetic modification, rotate i
to select Play . Press u
.
To delete the current phonetic modification, rotate i
to select Delete . Press u
.
Playing an iPod® Song By Voice TM (SBV)
Continued 185
186
Playing an iPod® Song By Voice TM (SBV)
6.
Enter the phonetic spelling you wish to use (e.g., “Artist A” ) when prompted.
7.
Move r
to select OK to exit.
The artist “No Name” is phonetically modified to “Artist A.”
When in the SBV mode, you can press the d
(Talk) button and use the voice command “Play ‘Artist A’” to play songs by the artist “No
Name.”
Playing Internet Radio
Selecting Internet Radio Mode
1.
Connect a compatible phone through Bluetooth ®.
Interface Dial
2.
Press the MENU button.(in AUDIO mode)
3.
Rotate i
to select Change Source . Press u
.
4.
Rotate i
to select Pandora or Aha . Press u
.
Touchscreen
2.
Select Audio Source .
3.
Select the Pandora or Aha icon.
iPhone®
You can also connect the phone using your dock connector to the USB port.
1 Playing internet Radio
Pandora®, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission. Pandora is currently available exclusively in the United States.
To find out if your phone is compatible with this feature, visit www.handsfreelink.honda.com
, or call 1-888-528-7876.
Pandora® is a personalized Internet radio service that selects music based on an artist, song, or genre a user enters, and streams what is likely to be of interest.
To use this service in your vehicle, the Pandora® app must first be installed on your phone. Visit www.pandora.com
. for more information.
If you cannot operate Pandora® through the audio system, it may be streaming through
Bluetooth ® Audio.
Make sure Pandora® mode on your audio system is selected.
187
188
Playing Internet Radio Pandora® Menu
Pandora® Menu
The following items are available:
• Skip Forward
• Play/Pause
• Station List
• Like
Interface Dial
Rotate i
to select an item. Press u
.
Press MENU button to display the menu items.
2
• Dislike
• Bookmark Track
• Bookmark Artist
1 Pandora® Menu
You can control Pandora® using voice commands.
2 Voice Control Operation P. 5
Available operating functions vary on software versions. Some functions may not be available on the vehicle’s audio system.
If there is a problem, you may see an error message on the navigation screen.
There are restrictions on the number of songs you can skip or dislike in a given hour.
Touchscreen
1.
Select b
or n
to change a station.
2.
Select x to skip a song.
Select song.
to resume or play a
Select or to evaluate a song.
Select More to display the menu item.
2
2
Aha
TM
Radio Menu
The following items are available:
• Like
• Dislike
• Play/Pause
• 15sec Back
Playing Internet Radio Aha TM Radio Menu
Interface Dial
Rotate i
to select an item. Press u
.
Press MENU button to display the menu items.
2
• 30sec skip
• View text
• View list
• Reply
Touchscreen
3.
Select b
or n
to change a station.
4.
Select c or x to skip contents.
Select song.
to resume or play a
Select an icon to evaluate a song.
Select More to display the menu item.
2
2
1 Aha
TM
Radio Menu
Aha
TM
by Harman is a cloud-based service that organizes your favorite web content into live radio stations. You can access podcasts, internet radio, location-based services, and audio updates from social media sites.
You can control Aha
TM
Radio using voice commands.
2 Voice Control Operation P. 5
Available operating functions vary on software versions. Some functions may not be available on the vehicle’s audio system.
If there is a problem, you may see an error message on the navigation screen.
The menu items vary depending on the station you selected.
To use this service in your vehicle, the HondaLink app must be installed on your phone. Visit owners.honda.com/apps for more information.
You must have a previously set up Aha account prior to using the service in your vehicle. Visit www.aharadio.com
for more information.
To display stations on the screen, they must be previously stored as favorites in the Aha app.
189
190
Playing Internet Radio Aha TM Radio Menu
■
How to Select a Station from the Station List
H
MENU button (in Aha TM mode) Stations
Rotate i
to select a station form the
Station list. Press u
.
Playing a USB Flash Drive
■
Connecting a USB Flash Drive
1 Connecting a USB Flash Drive
• Do not connect your USB flash drive using a hub.
• Do not use a device such as a card reader or hard disk drive, as the device or your tracks may be damaged.
• We recommend backing up your data before using the device in your vehicle.
1.
Open the USB cover.
2.
Install the USB flash drive to the USB connector.
■
USB Flash Drives
Use a recommended USB flash drive of 256 MB or higher.
Some digital audio players may not be compatible.
Some USB flash drives (e.g., a device with security lockout) may not work.
Some software files may not allow for audio play or text data display.
Some versions of MP3, WMA, or AAC formats may be unsupported.
1 USB Flash Drives
Digital music tracks, such as MP3, WMA, AAC, etc., in USB flash drives cannot be copied to
HDD. Likewise, digital music tracks recorded to
HDD cannot be copied to USB flash drives.
Files on the USB flash drive are played in their stored order. This order may be different from the order displayed on your PC or device.
191
192
Playing a USB Flash Drive Selecting USB Mode
Selecting USB Mode
1.
Connect the USB flash drive to the USB port in the console compartment.
Interface Dial
2.
Press the MENU button. (in AUDIO mode)
3.
Rotate i
to select Change Source . Press u
.
4.
Rotate i
to select USB . Press u
.
Touchscreen
2.
Select Audio Source .
3.
Select the iPod icon.
1 Playing a USB Flash Drive
You can control a USB flash drive using voice commands.
2 Voice Control Operation P. 5
Files in WMA/ACC format protected by digital rights management (DRM) cannot be played.
The audio system displays Unplayable File, and then skips to the next file.
If there is a problem, you may see an error message on the navigation screen.
2 iPod®/USB Flash Drive P. 285
Audio Screen Control
Control the audio system through the navigation screen and touchscreen.
Interface Dial
1.
Rotate i
or press u
to display the song list.
.
2.
Rotate i
, move w
or y
to select a song from the list. Press u
.
Press MENU button to display the menu items
Touchscreen
1.
Select b
to skip to the next folder, and n
to skip to the beginning of the previous folder.
2.
Select c
or x
to change files.
Select and hold to move rapidly within a file.
Select More to display the menu item.
Playing a USB Flash Drive Audio Screen Control
193
Playing a USB Flash Drive Audio Menu
Audio Menu
Interface Dial
H
MENU button (in USB mode)
Rotate i
to select an item. Press u
.
194
The following items are available:
• Scan:
Scan Folders: Provides 10-second sampling of the first file in each of the main folders.
Scan Tracks: Provides 10-second sampling of all files in the current folder.
• Random/Repeat:
Repeat Folder: Repeats all files in the current folder.
Repeat Track: Repeats the current file.
Random in Folder: Plays all files in the current folder in random order.
Random All Tracks: Plays all files in random order.
• Change Source: Changes the audio source mode.
• Music Search: Selects a file from the Music Search list.
2 How to Select a File from the Music Search List P. 196
Touchscreen
1.
Select More .
2.
Select a setting item.
The following items are available:
• Sound Settings: Displays the sound preferences screen.
• Random/Repeat:
Repeat Folder: Repeats all files in the current folder.
Repeat Track: Repeats the current file.
Random in Folder: Plays all files in the current folder in random order.
Random All Tracks: Plays all files in random order.
• Scan:
Scan Folders: Provides 10-second sampling of the first file in each of the main folders.
Scan Tracks: Provides 10-second sampling of all files in the current folder.
• Screen Settings: Displays the screen preferences screen.
2 Changing the Screen Settings P. 82
Playing a USB Flash Drive Audio Menu
195
196
Playing a USB Flash Drive Audio Menu
■
How to Select a File from the Music Search List
H
MENU button (in USB mode) Music Search
1.
Move w
or y
to select a search category. Press u
.
2.
Rotate i
to select a file from the
Music Search list. Press u
.
Playing Bluetooth ® Audio
Your audio system allows you to listen to music from your Bluetooth ®-compatible phone.
This function is available when the phone is paired and connected to the vehicle’s
Bluetooth ® HandsFreeLink® (HFL) system.
2 Bluetooth ® HandsFreeLink® P. 202
Selecting Bluetooth ® Audio Mode
1.
Make sure that your phone is on, paired, and linked to HFL.
Interface Dial
2.
Press the MENU button. (in AUDIO mode)
3.
Rotate i
to select Change Source . Press u
.
4.
Rotate i
to select Bluetooth Audio . Press u
.
Touchscreen
2.
Select Audio Source .
3.
Select the Bluetooth icon.
1 Playing Bluetooth ® Audio
Not all Bluetooth ®-enabled phones with streaming audio capabilities are compatible with the system.
For a list of compatible phones, visit www.handsfreelink.honda.com
, or call 1-888-528-7876.
State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.
If more than one phone is paired to the HFL system, there will be a delay before the system begins to play.
You can control Bluetooth ® Audio using voicecommands.
2 Voice Control Operation P. 5
197
198
Playing Bluetooth ® Audio Audio Screen Control
Audio Screen Control
Control the audio system through the navigation screen and touchscreen.
Interface Dial
1.
Press MENU button. (in BT mode)
.
2.
Rotate i
select an item. Press u
.
1 Audio Screen Control
To play the audio files, you may need to operate your phone. If so, follow the phone maker’s operating instructions.
The pause function and Music Search may not be available on some phones.
Switching to another mode pauses the music playing from your phone. This function may not be available on some phones.
The following items are available:
• Play: Plays a song.
• Pause: Pauses a song.
• Change Source: Changes the audio source mode.
• Music Search: Selects a song from the Music Search list.
Touchscreen
1.
Select b
or n
to change folders.
2.
Select c
or x
to change files.
Select More to display the menu items, then select a setting item.
The following items are available:
• Sound Settings: Displays the sound preferences screen.
• Screen Settings: Displays the screen preferences screen.
2 Changing the Screen Settings P. 82
Playing Bluetooth ® Audio Audio Screen Control
199
200
Bluetooth ® HandsFreeLink®
This section describes how to operate Bluetooth ® HandsFreeLink®. You can place and receive phone calls using your vehicle’s audio system without handling your cell phone.
Bluetooth ® HandsFreeLink® ................202
Using HFL .............................................202
Pairing a Phone .....................................204
Importing Phonebook Data ...................210
Setting Up Speed Dialing ......................211
Phonebook Phonetic Modification.........214
Phone Settings ......................................219
Making a Call .......................................224
Receiving a Call.....................................229
Text Message/E-mail .............................231
Setting a Text Message/E-mail ...............231
Selecting a Mail Account.......................233
Receiving a Text Message/E-mail ...........234
Displaying Messages .............................235
HFL Menus ........................................... 239
201
Bluetooth ® HandsFreeLink®
202
Bluetooth ® HandsFreeLink® (HFL) allows you to place and receive phone calls using your vehicle’s navigation system, without handling your cell phone.
Using HFL
■
HFL Buttons
MODE Button
Microphone
Pick-up
Button
CH
Button
PHONE
Button
Hang-up/Back
Button
Talk Button
VOL
Button
Interface
Dial
NAV h
(Pick-up) button: Press to go directly to the Phone screen or to answer an incoming call.
J
(Hang-up/back) button: Press to end a call, to cancel a command or to return to the previous screen.
d
(Talk) button: Press to give HFL voice commands.
PHONE button: Press to go directly to the Phone screen.
Interface dial: Rotate i
to select an item on the screen, then press u
. Move w
, y
, e or u
to select secondary menu.
1 Bluetooth ® HandsFreeLink®
To use HFL, you need a Bluetooth ®-compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities:
Visit www.handsfreelink.honda.com
, or call 1-888-528-7876.
Voice control tips:
• Aim the vents away from the ceiling and close the windows, as noise coming from them may interfere with the microphone.
• Press and release the d
button when you want to call a number using a stored voice tag, a phonebook name, or a number. Speak clearly and naturally after a beep.
• If the microphone picks up voices other than yours, the command may be misinterpreted.
• To change the volume level, use the audio system’s volume knob or the remote audio controls on the steering wheel.
State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.
If you receive a call while using the audio system, the system resumes its operation an after ending the call.
Bluetooth ® HandsFreeLink® Using HFL
■
HFL Status Display
The navigation screen notifies you when there is an incoming call.
Bluetooth ® Indicator
Comes on when your phone is connected to HFL.
Caller’s Name
Battery Level Status
Roam Status
Signal Strength
Caller’s Number
1 Bluetooth ® HandsFreeLink®
Bluetooth ® Wireless Technology
The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc., and any use of such marks by Honda Motor
Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.
■
Limitations for Manual Operation
Disabled Option
Certain manual functions are disabled or inoperable while the vehicle is in motion.
You cannot select a grayed-out option until the vehicle is stopped.
Only previously stored speed dial entries with voice tags, phonebook names, or numbers can be called using voice commands while the vehicle is in motion.
2
Setting Up Speed Dialing P. 211
1 HFL Status Display
The information that appears on the navigation screen varies between phone models.
You can change the system language to English,
French, or Spanish.
203
204
Bluetooth ® HandsFreeLink® Pairing a Phone
Pairing a Phone
H
PHONE button
When no appears:
Bluetooth ®-compatible phone has ever been paired, the following screen
1.
Rotate i to select Yes . Press or discoverable mode. Press u
.
u
2.
Make sure your phone is in search
.
HFL automatically searches for a
Bluetooth ® device.
3.
When your phone appears on the list, select it by pressing u
.
If your phone does not appear, you can select Refresh to search again.
If your phone still does not appear, move r
to select
Phone not Found?
and search for Bluetooth ® devices using your phone. From your phone, select HandsFreeLink .
1 Pairing a Phone
Your Bluetooth ®-compatible phone must be paired to HFL before you can make and receive hands-free calls.
Phone Pairing Tips:
• You cannot pair your phone while the vehicle is moving.
• Up to six phones can be paired.
• Your phone's battery may drain faster when it is connected to HFL.
• If your phone is not ready for pairing or not found by the system within three minutes, the system will time out and returns to idle.
Once you have paired a phone, you can see it displayed on the screen with one or two icons on the right side.
These icons indicate the following:
: The phone can be used with HFL.
: The phone is compatible with Bluetooth ®
Audio.
Bluetooth ® HandsFreeLink® Pairing a Phone
4.
HFL gives you a pairing code on the navigation screen.
Confirm if the pairing code on the screen and your phone match.
This may vary by phone.
5.
You will receive a notification on the screen if pairing is successful.
1 Pairing a Phone
When pairing is completed, an Automatic
Phone Sync prompt appears. Select On if you want your call history and phonebook automatically imported to HFL.
2 Automatic Phone Sync setting P. 223
■
Pairing from Phone Setup
H
SETTINGS button Phone Settings Connect Phone
1.
Rotate i to select Add
Bluetooth Device .
2.
Make sure your phone is in search or discoverable mode. Press u
.
HFL automatically searches for a
Bluetooth ® device.
Continued 205
206
Bluetooth ® HandsFreeLink® Pairing a Phone
3.
When your phone appears on the list, select it by pressing u
.
If your phone does not appear, you can select Refresh to search again.
If your phone still does not appear, move r to select
Phone not Found?
and search for Bluetooth ® devices using your phone. From your phone, select HandsFreeLink .
4.
HFL gives you a pairing code on the navigation screen.
Confirm if the pairing code on the screen and your phone match. This may vary by phone.
5.
You will receive a notification on the screen if pairing is successful.
Bluetooth ® HandsFreeLink® Pairing a Phone
■
Changing the Pairing Code
H
SETTINGS button System Settings
1.
Rotate i to select Edit Pairing
Code . Press u
.
1 Changing the Pairing Code
The pairing code may be six or four digits depending on your phone.
The default pairing code is 0000 until you change the setting.
To create your own, select Fixed , and delete the current code, then enter a new one.
For a randomly generated pairing code each time you pair a phone, select Random .
2.
Rotate i to select Fixed or
Random . Press u
.
207
208
Bluetooth ® HandsFreeLink® Pairing a Phone
■
Changing the Currently Paired Phone
H
SETTINGS button Phone Settings Bluetooth Device List
1.
Rotate i to select a paired phone you want to replace. Press u
.
2.
Rotate i to select Replace This
Device . Press u
.
3.
HFL enters the pairing process and searches a new phone.
Follow the prompts to pair a new phone.
4.
You will receive a notification on the screen if pairing is successful.
1 Changing the Currently Paired Phone
The replaced phone will keep the same speed dial entries, and security PIN information from the previously paired phone.
■
Deleting a Paired Phone
H
SETTINGS button Phone Settings Bluetooth Device List
1.
Rotate i to select a paired phone you want to replace. Press u
.
2.
Rotate i to select Delete This
Device . Press u
.
Bluetooth ® HandsFreeLink® Pairing a Phone
3.
You will receive a confirmation message on the screen. Rotate i to select Yes . Press u
.
4.
You will receive a notification on the screen if deletion is successful.
209
210
Bluetooth ® HandsFreeLink® Importing Phonebook Data
Importing Phonebook Data
When your phone is paired, the contents of its phonebook and call history are automatically imported to
HFL.
1 Importing Phonebook Data
When you select a person from the list in the cellular phonebook, you can see up to three category icons. The icons indicate what types of numbers are stored for that name.
Pref
Home
Mobile
Work
Pager
Fax
Car
Other
Message
Voice
On some phones, it may not be possible to import the category icons to HFL.
The phonebook is updated after every connection. Call history is updated after every connection or call.
Setting Up Speed Dialing
H
MENU button (on PHONE screen) Speed Dial
Up to 20 speed dial numbers can be stored per phone.
1.
Rotate i to select New Entry .
Press u
.
Bluetooth ® HandsFreeLink® Setting Up Speed Dialing
1 Setting Up Speed Dialing
When a voice tag is stored, press the d
button to call the number using the voice tag. Say ”Call“ and the voice tag name.
2.
Rotate i to select a number entry method. Press u
.
The following options are available:
• Import from Call History : Select a number from the call history.
• Manual Input : Input the number manually.
• Import from Phonebook : Select a number from the linked cell phone's imported phonebook.
211
212
Bluetooth ® HandsFreeLink® Setting Up Speed Dialing
■
Registering a Voice Tag to a Speed Dial Entry
H
SETTINGS button Phone Settings Edit Speed Dial
1.
Select an existing speed dial entry.
2.
From the pop-up menu, rotate i to select Edit . Press u
.
1 Registering a Voice Tag to a Speed Dial Entry
Avoid using duplicate voice tags.
Avoid using ” home “ as a voice tag.
It is easier for HFL to recognize a longer name.
For example, use ” John Smith“ instead of
” John.“
3.
Rotate i to select Voice Tag.
Press u
.
4.
From the pop-up menu, rotate i to select Record . Press u
.
After selecting Record , wait for the beep(s) to sound before you say the name.
5.
Move r
and select OK to complete the voice tag.
Bluetooth ® HandsFreeLink® Setting Up Speed Dialing
■ To delete a voice tag
1.
Select an existing speed dial entry.
2.
From the pop-up menu, rotate i to select Edit . Press u
.
3.
Rotate i to select Voice Tag.
Press u
.
4.
From the pop-up menu, rotate i to select Clear . Press u
.
5.
You will receive a confirmation message on the screen. Rotate to select Yes . Press u
.
■ To delete a speed dial
1.
Select an existing speed dial entry.
2.
From the pop-up menu, rotate i to select Delete . Press u
.
3.
You will receive a confirmation message on the screen. Rotate to select Yes . Press u
.
213
214
Bluetooth ® HandsFreeLink® Phonebook Phonetic Modification
Phonebook Phonetic Modification
H
SETTINGS button System Settings Phonebook Phonetic Modification
Add phonetic modifications or a new voice tag to the phone's contact name so that it is easier for HFL to recognize voice commands.
Phonetic modification
■ To add a new voice tag
1.
Rotate i to select the phone you want to add phonetic modification to. Press u
.
1 Phonebook Phonetic Modification
You can store up to 20 phonetic modification items.
2.
Rotate i to select New Voice
Tag . Press u .
Bluetooth ® HandsFreeLink® Phonebook Phonetic Modification
3.
Move w or y and rotate i to select a contact name. Press u
.
The pop-up menu appears on the screen.
4.
Rotate i to select Modify . Press u
.
5.
Using the d button, follow the prompts to complete the voice tag.
6.
You will receive a confirmation message on the screen. Rotate i to select OK . Press u
.
7.
The screen returns to the New
Voice Tag screen. Move r and rotate i
to select OK . Press u
.
215
216
Bluetooth ® HandsFreeLink® Phonebook Phonetic Modification
■ To modify a voice tag
1.
Rotate i to select the phone you want to add phonetic modification to. Press u
.
2.
Rotate i to select a contact name you want to modify. Press u
.
The pop-up menu appears on the screen.
3.
Rotate i to select Modify . Press u
.
4.
Using the d button, follow the prompts to complete the voice tag.
5.
You will receive a confirmation message on the screen. Rotate i to select OK . press u
.
1 Phonebook Phonetic Modification
You can only modify or delete contact names for the currently connected phone.
Trash icon
Bluetooth ® HandsFreeLink® Phonebook Phonetic Modification
■ To delete a modified voice tag
1.
Rotate i to select the phone you want to delete phonetic modification. Press u
.
2.
Rotate i to select a contact name you want to delete. Press u
.
The pop-up menu appears on the screen.
3.
Rotate i to select Delete , then press u
.
Items to be deleted are indicated with a trash icon.
4.
Move r and rotate i to select
OK. Press u
.
Continued 217
218
Bluetooth ® HandsFreeLink® Phonebook Phonetic Modification
Phonetic modification
■ To delete all modified voice tags
1.
Rotate i to select the phone you want to delete phonetic modification. Press u
.
The contact name list appears.
2.
Move r and rotate i
to select
Delete All . Press u
.
3.
You will receive a confirmation message on the screen. Rotate i to select OK. press u
.
Bluetooth ® HandsFreeLink® Phone Settings
Phone Settings
H
SETTINGS button Phone Settings
Set HFL options and features.
■
Editing a Security PIN
H
SETTINGS button Phone Settings Bluetooth Device List
You can protect each of the six cell phones with a security PIN.
1.
Rotate i to select the phone you want to add a security PIN to. Press u
.
2.
Rotate i to select Edit PIN.
Press u
.
1 Editing a Security PIN
If the phone is already security PIN protected, you need to enter the current security PIN before clearing the PIN or creating a new one.
3.
Enter a new four-digit number.
Rotate i
to select OK to enter the security PIN.
Move w
to delete.
4.
Re-enter the four-digit number.
The screen returns to the screen in step 4.
219
220
Bluetooth ® HandsFreeLink® Phone Settings
■
Editing User Name
H
SETTINGS button Phone Settings Bluetooth Device List
Edit the user name of a paired phone as follows:
1.
Rotate i to select a phone you want to edit. Press u
.
2.
Rotate i to select Edit Device
Name.
Press u
.
3.
Enter a new name of the phone.
Rotate i or move r
to select
OK to enter the name. Press u
.
Move w
to delete.
■
Automatic Transferring
H
SETTINGS button Phone Settings Auto Transfer
If you get into the vehicle while you are on the phone, the call can be automatically transferred to HFL.
Rotate i to select On . Press u
.
Bluetooth ® HandsFreeLink® Phone Settings
■
Auto Answer
H
SETTINGS button Phone Settings Auto Answer
You can set HFL to automatically answer an incoming call in four seconds.
Rotate i to select On . Press u
.
221
222
Bluetooth ® HandsFreeLink® Phone Settings
■
Ring Tone
H
SETTINGS button Phone Settings Ring Tone
You can change the ring tone setting.
Rotate i to select your desired setting item. Press u
.
The following items are available:
• Fixed : The fixed ring tone sounds from the speaker.
• Mobile Phone : The ring tone stored in the connected cell phone sounds from the speaker.
• Off : No ring tones sound from the speaker.
■
Automatic Phone Sync setting
H
SETTINGS button Phone Settings Automatic Phone Sync
Rotate i to select On or Off . Press u
.
Bluetooth ® HandsFreeLink® Phone Settings
■
Use Contact Photo
H
SETTINGS button
Phone Settings
Use Contact Photo
You can display a caller's picture on an incoming call screen.
Phone settings
Rotate i to select On . Press u
.
All Phone
Auto Transfer
Auto Answer
Ring Tone
Automatic Phone Sy
Use Contact Photo
On
Off
Default
223
224
Bluetooth ® HandsFreeLink® Making a Call
Making a Call
You can make calls by inputting any phone number, or by using the imported phonebook, call history, speed dial entries, or redial.
1 Making a Call
Any voice-tagged speed dial entry, phonebook name, or number can be dialed by voice from most screens. Press the d
button and say ”Call“ and the voice tag name, ”Call by name“ and the phonebook name, or ”Call“ and the phone number.
The maximum range between your phone and vehicles is 30 feet (10 meters).
Once a call is connected, you can hear the voice of the person you are calling through the audio speakers.
Bluetooth ® HandsFreeLink® Making a Call
■
Using the Phonebook
H
MENU button (on Phone Settings) Phonebook
1.
The phonebook is stored alphabetically. Move r
to Search .
You can use the keyboard on the touch screen for an alphabetical search.
1 Using the Phonebook
This function is disabled while the vehicle is moving. However, you can call a stored voicetagged speed dial number, phonebook name, or number using voice commands.
2 Limitations for Manual Operation P. 203
2 Setting Up Speed Dialing P. 211
2.
Rotate i to select a number.
Press u
.
Dialing starts automatically.
225
226
Bluetooth ® HandsFreeLink® Making a Call
■
Entering a Phone Number
H
MENU button (on Phone Settings) Dial
1.
Rotate i to select a number.
Press u
.
2.
Rotate i to select h
. Press u
.
1 Entering a Phone Number
This function is disabled while the vehicle is moving. However, you can call a stored voicetagged speed dial number, phonebook name, or number using voice commands.
2 Limitations for Manual Operation P. 203
2 Setting Up Speed Dialing P. 211
■
Using Redial
H
MENU button (on Phone Settings) Redial
You can display a caller's picture on an incoming call screen.
Rotate i to select Dial. Press u
.
Dialing starts automatically.
Bluetooth ® HandsFreeLink® Making a Call
■
Using Call History
H
MENU button (on Phone Settings) Call History
Call history is stored by All , Dialed , Received , and Missed .
1.
Move w or y to select All ,
Dialed , Received , and Missed .
2.
Rotate i to select a number.
Press u
.
Dialing starts automatically.
1 Using Call History
The call history displays the last 20 dialed, received, or missed calls.
(Appears only when a phone is connected to
HFL.)
These icons next to the number indicate the following:
: Dialed calls
: Received calls
: Missed calls
Steering switches
1.
Press the h
button.
2.
Move the left selector wheel right to select Call History .
3.
Roll the left selector wheel to select a number.
4.
Push the left selector wheel or the h
button.
Dialing starts automatically.
Steering switches
The call history displays the last 12 dialed, received, or missed calls.
227
228
Bluetooth ® HandsFreeLink® Making a Call
■
Using Speed Dial
H
MENU button (on Phone Settings) Speed Dial
Rotate i to select a number. Press u
.
Dialing starts automatically.
1 Using Speed Dial
Move r
to select More Speed Dials to view another paired phone's speed dial list. You can make a call from that list using the currently connected phone.
When a voice tag is stored, press the d
button to call the number using the voice tag.
2 Setting Up Speed Dialing P. 211
Any voice-tagged speed dial entry, phonebook name or number can be dialed by voice from any screen. Press the d
button and follow the prompts.
Steering switches
1.
Press the h
button.
2.
Move the left selector wheel left to select Speed Dial .
3.
Roll the left selector wheel to select a number.
4.
Push the left selector wheel or the h
button.
Dialing starts automatically.
Steering switches
The speed dial displays the 20 speed dial entries.
Bluetooth ® HandsFreeLink® Receiving a Call
Receiving a Call
When there is an incoming call, an audible notification sounds (if activated) and the
Incoming call screen appears.
1.
Press the h
button to answer the call.
2.
Press the
J
button to decline or end the call.
1 Receiving a Call
Call Waiting
Press the h
button to put the current call on hold to answer the incoming call.
Press the h
button again to return to the current call.
Ignore the incoming call if you do not want to answer it.
Press the
J
button if you want to hang up the current call.
229
230
Bluetooth ® HandsFreeLink® Receiving a Call
■
Options During a Call
The available options are shown on the Phone screen.
Rotate i to select the option. Press u
.
The mute icon appears when Mute is selected. Select Mute again to turn it off.
1 Options During a Call
Touch Tones : Available on some phones when the vehicle is stopped.
The following options are available during a call:
• Mute : Mute your voice.
• Transfer : Transfer a call from HFL to your phone.
• Touch Tones : Send numbers during a call. This is useful when you call a menudriven phone system.
Text Message/E-mail
Setting a Text Message/E-mail
■
To turn on or off the text/E-mail function
H
SETTINGS button Phone Settings Enable Text/Email
Rotate i to select On or Off . Press u
.
■
To turn on or off the text/E-mail notice
H
SETTINGS button Phone Settings New Text/Email Alert
Rotate i to select On or Off . Press u
.
The following items are available:
• On : A pop-up notification comes on every time you receive a new text message.
• Off : The message you receive is stored in the system without notification.
231
232
Text Message/E-mail Setting a Text Message/E-mail
■
To set up the auto reading option
H
SETTINGS button System Settings Message Auto Reading
Rotate i to select On , Off or Auto .
Press u
.
The following items are available:
• On : A text message/Email is always read aloud.
• Off : A text message/Email is not read aloud.
• Auto : A text message/Email is read aloud only when driving.
Text Message/E-mail Selecting a Mail Account
Selecting a Mail Account
H
SETTINGS button Phone Settings Select Account
If a paired phone has text message or mail accounts, you can select one of them to be active and receive notifications.
Rotate i to Text Messages or an
E-mail account you want. Press u
.
1 Selecting a Mail Account
You can also select a mail account from the folder list screen or the message list screen.
Move r
to select u
.
Select Account , then press
You can only receive notifications from one text message or mail account at a time.
233
234
Text Message/E-mail Receiving a Text Message/E-mail
Receiving a Text Message/E-mail
HFL can display newly received text messages and E-mails as well as 20 of the most recently received messages on a linked cell phone. Each received message can be read aloud and replied to using a fixed common phrase.
1.
A pop-up appears and notifies you of a new text message or E-mail.
2.
Rotate i to select Read to listen to the message. Press u
.
The text message or E-mail is displayed. The system automatically starts reading out the message.
3.
To discontinue the message readout. Press u
.
1 Receiving a Text Message/E-mail
The system does not display any received messages while you are driving. You can only hear them read aloud.
With some phones, you may be able to display up to 20 most recent text messages and E-mails.
State or local laws may limit your use of the HFL text message/E-mail feature. Only use the text message/ E-mail feature when conditions allow you to do so safely.
When you receive a text message or E-mail for the first time since the phone is paired to HFL, you are asked to turn the New Text/Email
Alert setting to On.
2 To turn on or off the text/E-mail notice
Text Message/E-mail Displaying Messages
Displaying Messages
■
Displaying text messages
H
MENU button (on Phone Settings) Text/Email
1.
Select account if necessary.
2.
Rotate i to select a message.
Press u
.
The text message is displayed.
The system automatically starts reading the message aloud.
1 Displaying Messages
The icon appears next to an unread message.
If you delete a message on the phone, the message is also deleted in the system. If you send a message from the system, the message goes to your phone’s outbox.
To see the previous or next message, move w or y
on the text message screen.
235
236
Text Message/E-mail Displaying Messages
■
Displaying E-mails
H
MENU button (on Phone Settings) Text/Email
1.
Rotate i to select a folder. Press u
.
1 Displaying E-mails
Received text messages and E-mails may appear in the message list screen at the same time. In this case, text messages are titled No subject .
2.
Rotate i to select a message.
Press u
.
The text message is displayed.
The system automatically starts reading the message aloud.
■
Read or stop reading a message
1.
Go to the text message or E-mail screen.
The system automatically starts reading the message aloud.
2.
Press u
to stop reading.
Press u
again to start reading the message from the beginning.
■
Reply a message
1.
Go to the text message or E-mail screen.
The system automatically starts reading the message aloud.
2.
Move r
and rotate i
to select
Reply . Press u
.
Text Message/E-mail Displaying Messages
237
238
Text Message/E-mail Displaying Messages
■
Making a call to a sender
3.
Rotate i
to select the reply message. Press u
.
The pop-up menu appears on the screen.
4.
Select Send to send the message.
Message Sent appears on the screen when the reply message was successfully sent.
1 Reply to a message
The available fixed reply messages are as follows:
• Talk to you later, I’m driving.
• I’m on my way.
• I’m running late.
• OK
• Yes
• No
You cannot add, edit, or delete reply messages.
1.
Go to the text message screen.
The system automatically starts reading the message aloud.
2 Displaying text messages P. 235
2.
Move r
and rotate i
to select
Call . Press u
.
HFL Menus
The power mode must be in ACCESSORY or ON to use HFL.
■ Phone Settings screen
1.
Press the SETTINGS button.
2.
Rotate i
to select Phone
Settings , then press u
.
Text Message/E-mail HFL Menus
1 HFL Menus
To use HFL, you must first pair your Bluetooth ®compatible cell phone to the system while the vehicle is parked.
Some functions are limited while driving. A message appears on the screen when the vehicle is moving and the operation is canceled.
Phone
Connect phone
Bluetooth
Device List
(Existing entry list)
Add Bluetooth
Device
Disconnect
Connect a phone to the system.
Pair a phone to the system.
Disconnect a paired phone from the system.
(Existing entry list)
Edit Device
Name
Edit PIN
Replace This
Device
Delete This
Device
Edit the user name of a paired phone.
Create a security PIN for a paired phone.
Replace a previously paired phone with a new phone.
Delete a previously paired phone.
Add Bluetooth
Device
Pair a phone to the system.
*1: Appears only when a phone is connected to HFL.
Continued 239
Text Message/E-mail HFL Menus
240
Edit Speed
Dial
Delete All Delete all the previously stored speed dial numbers.
New Entry
Manual
Input
Import from
Call History
Import from
Phonebook
Enter a phone number to store as a speed dial number.
Select a phone number from the call history to store as a speed dial number.
Select a phone number from the phonebook to store as a speed dial number.
(Existing entry list)
Edit
Delete
Edit a previously stored speed dial number.
• Change a number.
• Create or delete a voice tag.
Delete a previously stored speed dial number.
Auto Transfer
Auto Answer
Ring Tone
Automatic Phone Sync
Use Contact Photo
Set calls to automatically transfer from your phone to HFL when you enter the vehicle.
Set whether to automatically answer an incoming call after about four seconds.
Select the ring tone.
Set phonebook data to be automatically imported when a phone is paired to
HFL.
Display a caller’s picture on an incoming call screen.
Default Cancel/Reset all customized items in the Phone Settings group as default.
Text/
*1
Enable Text/Email
Select Account
New Text/Email Alert
Turn the text message/E-mail function on and off.
Select a mail or text message account.
Select whether a pop-up alert comes on the screen when HFL receives a new text message/E-mail.
*1: Appears only when a phone is connected to HFL.
Text Message/E-mail HFL Menus
■ Phone screen
1.
Press the PHONE button.
2.
Press the MENU button to display the menu items.
Dial *1 Enter a phone number to dial.
Phonebook *1 Display the paired phone’s phonebook.
Speed Dial *1
New Entry
(Existing entry list)
More Speed Dials
Manual Input
Import from
Call History
Import from
Phonebook
Enter a phone number to store as a speed dial number.
Select a phone number from the call history to store as a speed dial number.
Select a phone number from the phonebook to store as a speed dial number.
Dial the selected number in the speed dial list.
Display another paired phone’s speed dial list.
*1: Appears only when a phone is connected to HFL.
241
Text Message/E-mail HFL Menus
Redial *1
Call History *1
Redial the last number dialed in the phone’s history.
All
Dialed
Received
Missed
Display the last 20 outgoing, incoming and missed calls.
Display the last 20 outgoing calls.
Display the last 20 incoming calls.
Display the last 20 missed calls.
Text/Email
*1
Select a message and press .
Message is read aloud.
(Read/Stop)
Previous
Next
Reply
System reads received message aloud, or stop message from being read.
See the previous message.
See the next message.
Reply to a received message using one of six fixed phrases.
Make a call to the sender.
Call
Select
Account
Select a mail or text message account.
242
*1: Appears only when a phone is connected to HFL.
Rear Entertainment System
Rear seat passengers can enjoy a completely separate entertainment source than front passengers, including movies, games, and other audio choices.
Rear Entertainment System ..................244
Auxiliary Console Panel .........................244
HDMI Input Jack (Ultrawide RES only)....245
Rear Control Panel Operation ...............248
Selecting the Audio Source ...................248
Rear DVD Menu ....................................249
Screen and Surround Settings ...............252
DVD Initial Settings (RES only) ...............255
Dual Screen Mode (Ultrawide RES only).256
Replacing the Batteries..........................258
Front Control Panel Operation .............259
Selecting the Audio Source using front control panel.......................................259
Rear System Setup ................................260
Setting the DVD Menu ......................... 261
Wireless Headphones ........................... 263
Using the Wireless Headphones ........... 263
Replacing the Batteries ......................... 265
243
Rear Entertainment System
The Rear Entertainment System (RES) is operable from both the front control panel and the rear control panel.
2 Front Control Panel Operation P. 259
2 Rear Control Panel Operation P. 248
Auxiliary Console Panel
Auxiliary input jacks and headphone connectors for the rear entertainment system are above the third row seat armrest on the driver’s side.
V = Video jack
L = Left audio jack
R = Right audio jack
1 Rear Entertainment System
NOTICE
This vehicle’s overhead mounted video display, if so equipped, includes mercury-containing components. Upon removal, please reuse, recycle, or dispose of as hazardous waste.
244
AUXILIARY INPUT JACK
■ Auxiliary Input Jacks
The system will accept auxiliary inputs from standard video games and video equipment. Some video game power supplies may cause poor picture quality.
■ Headphone Connectors
There are two headphone connectors for the rear passengers. Each connector has its own volume control.
Rear Entertainment System HDMI Input Jack (Ultrawide RES only)
HDMI Input Jack (Ultrawide RES only)
There is an HDMI input jack above the third row seat armrest on the passenger’s side. The system will accept HDMI input from video games and video equipment which are equipped with an HDMI jack.
Open the outlet cover and insert the cable.
245
246
Rear Entertainment System Audio Sources for Front and Rear Seats
Audio Sources for Front and Rear Seats
The table shows the possible audio source combinations of the front audio system and rear entertainment system’s simultaneous use.
Rear
Front
AM/FM
Radio
SiriusXM
®
Radio
CD
DVD
HDD
USB iPod ®
AM/FM
Radio
Yes
Yes
Yes
Yes
Yes
Yes
SiriusXM ®
Radio
Yes
Yes
Yes
Yes
Yes
Yes
CD
Yes
Yes
Yes
Yes
Yes
Yes
DVD *1
Yes
Yes
Yes
Yes
Yes
Yes
HDD
Yes
Yes
Yes
Yes
Yes
Yes
USB iPod ®
Yes
Yes
Yes
Yes
Yes
Yes
Bluetooth ®
Audio
Yes
No
Yes
Yes
Yes
Yes
Pandora ®
Aha TM
Yes
No
Yes
Yes
Yes
Yes
*1. The front seat passengers are only able to hear the DVD’s sound from the front speakers.
1 Audio Sources for Front and Rear Seats
Yes: These audio sources are simultaneously playable. When listening to same source in both the front and rear, the playing channel or track will also be the same for each.
No: These audio sources are not simultaneously playable.
Rear Entertainment System Playable Discs
Playable Discs
The discs that come with these labels can be played in your vehicle’s rear entertainment system.
Also look for the region code of 1 or ALL on the package or jacket on the disc.
DVD-ROMs are not playable in this unit.
The disc packages or jackets should have one of these marks.
Also includes:
1 Playable Discs
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi
Corporation. Reverse engineering and disassembly are prohibited.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other
U.S. and worldwide patents issued & pending.
DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights
Reserved.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS Neural
Surround is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights
Reserved.
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, MLP Lossless and the double-D symbol are trademarks of Dolby
Laboratories.
247
248
Rear Control Panel Operation
Selecting the Audio Source
■ RES
1.
Press the Rear Power button on the front control panel.
2.
Press the audio source button on the rear control panel.
You can also change the audio source by the front control panel.
2 Selecting the Audio Source using front control panel P. 259
3.
Select a station, channel, track, or chapter using the CH/FOLDER, TUNE/SKIP, or
CATEGORY bars.
2 Overhead Screen and Rear Control Panel P. 14
■ Ultrawide RES
1.
Press the Rear Power button on the front control panel.
2.
Press the SOURCE button on the rear control panel.
3.
Select the audio source. Press the
ENTER button.
You can also change the audio source by the front control panel.
2 Selecting the Audio Source using front control panel P. 259
4.
Select a station, channel, track, or chapter using the CH/FOLDER,
TUNE/SKIP, or CATEGORY bars.
1 Rear Control Panel Operation
In the procedures of this section, “select” means the following actions:
RES
Press the cursor buttons on the rear control panel.
Ultrawide RES
Rotate the Interface Dial on the rear control panel.
The rear control panel can be detached from the ceiling unit and used as a remote control.
2 Overhead Screen and Rear Control Panel
In this section, screen illustrations from the standard RES are used for the explanation unless otherwise noted.
The screen is displayed on the overhead screen.
Rear DVD Menu
H
MENU button (in the DVD mode)
Select an item. Press the ENTER button.
Rear Control Panel Operation Rear DVD Menu
The following items are available:
• Top Menu : Displays the top menu of the DVD.
• Menu : Displays the menu of the DVD.
• Play Mode : Displays while a DVD is playing and changes the DVD’s audio, subtitle, or angle settings.
2 Setting the Play Mode P. 250
• Initial Settings : Displays while a DVD is not playing and changes the DVD preferences.
2 DVD Initial Settings (RES only) P. 255
• Search/NumInput : Skips to a title or chapter by entering the number.
2 Searching a Title/Chapter P. 251
• Repeat : o
TITLE REPEAT: Repeats the current title.
p
CHAPTER REPEAT: Repeats the current chapter.
• Pause/Play : Pauses or resume the playback
• Stop : Stops the playback.
• Return : Hides the rear audio menu.
249
250
Rear Control Panel Operation Rear DVD Menu
■
Setting the Play Mode
H
MENU button (in the DVD mode) Play Mode
1.
Select an item. Press the ENTER button.
2.
Select an option. Press the ENTER button.
The following items are available:
• Audio : Selects the language of the DVD audio.
• Subtitle : Selects the language of the DVD subtitle.
• Angle : Selects the angle of a scene shot with multiple cameras.
■
Searching a Title/Chapter
H
MENU button (in the DVD mode) Search/NumInput
1.
Select an item. Press the ENTER button.
2.
Select a number. Press the ENTER button.
Rear Control Panel Operation Rear DVD Menu
The following items are available:
• Title : Skips to a title you specify.
• Chapter : Skips to a chapter you specify.
• NumInput : Enters a number of a title or chapter to skip.
RES
Enter a number and select ENT. Press the ENTER button.
Ultrawide RES
Enter a number and press the ENTER button. Select DONE.
251
Rear Control Panel Operation Screen and Surround Settings
Screen and Surround Settings
H
SETUP button (in the DVD mode)
Select an item. Press the ENTER button.
252
The following items are available:
• Brightness (Ultrawide RES only): Adjusts the screen’s brightness. Adjust the brightness using the Interface Dial and press the ENTER button.
• Appearance (Ultrawide RES only): Selects the color of the rear menu screen.
• Display Adjust : Adjusts the screen’s preferences.
• Aspect Ratio : Selects an aspect ratio of the image
2 Setting the RES Aspect Ratio P. 254
2 Setting the Ultrawide RES Aspect Ratio P. 254
• PERSONAL SURROUND : Sets the surround of the wireless headphones. You can choose from three options: Music , Cinema , or Voice . Select Off to disable the feature.
• Language : Sets the system language used on all screens. You can choose from three languages: English , Français (French), or Español (Spanish).
Rear Control Panel Operation Screen and Surround Settings
■
Adjusting the Screen
H
SETUP button (in the DVD mode) Display Adjust
1.
Select an item. Press the ENTER button.
2.
Make the adjustment. Press the
ENTER button.
The following items are available:
• Brightness (RES only): Adjusts the screen’s brightness.
• Contrast : Adjusts the screen’s contrast.
• Black Level : Adjusts the screen’s black level.
• Color : Adjusts the screen’s color strength.
• Tint : Adjusts the screen’s hue.
• Reset : Resets all the settings to their factory default.
253
Rear Control Panel Operation Screen and Surround Settings
■
Setting the RES Aspect Ratio
H
MENU button (in the DVD mode) Aspect Ratio
Select an option. Press the ENTER button.
■
Setting the Ultrawide RES Aspect Ratio
H
MENU button (in the DVD mode)
Aspect Ratio
1.
Select an item. Press the ENTER button.
2.
Select an item. Press the ENTER button.
254
The following items are available:
• Wide : Selects the wide screen option ( Normal , Full , Super Full , Ultra Full ).
• Zoom : Selects the zoom screen option ( Super Zoom , Ultra Zoom ).
Rear Control Panel Operation DVD Initial Settings (RES only)
DVD Initial Settings (RES only)
H
MENU button (in the DVD mode) Initial Settings
Set the DVD default settings so that you do not have to select the settings each time you play a DVD.
1.
Select an item. Press the ENTER button.
2.
Select an option. Press the ENTER button.
The following items are available:
• Language Settings : Selects a menu language of the DVD (top) menu.
2 Selecting the DVD Menu Language P. 256
• Dynamic Range : Sets whether to control the range of the loud and low sounds.
On : Adjusts the dynamic range to easily hear the low sound.
Off (factory default): Disables the feature.
• Angle Mark : Sets whether to display the angle symbol.
On : Displays the angle symbol when playing the multiple angle scenes.
Off (factory default): Disables the feature.
255
256
Rear Control Panel Operation Dual Screen Mode (Ultrawide RES only)
■
Selecting the DVD Menu Language
H
MENU button (in the DVD mode) Initial Settings Language Settings
1.
Select an item. Press the ENTER button.
2.
Select a language. Press the ENTER button.
1 Selecting the DVD Menu Language
When you select Other , enter a 4-digit language code.
2 List of Language Codes P. 319
Dual Screen Mode (Ultrawide RES only)
Select between the two screen modes, single or dual.
■ Single Mode
The selected source is displayed in the center of the screen.
■ Dual Mode
Two separate screens are displayed side by side. You can only select one output source from the front audio system. The other source must come from “AUX-
VIDEO” or “AUX-HDMI.”
Rear Control Panel Operation Dual Screen Mode (Ultrawide RES only)
■ Single mode to Dual mode
DVD
■ Dual mode to Single mode
AUX-VIDEO DVD
Press the DUAL button.
DVD AUX-VIDEO
Select the side
(e.g., “Left”).
AUX-VIDEO
Select a source
(e.g., “AUX-
VIDEO”).
DVD
Press the SWAP button.
DVD
Press the
SINGLE button.
Select a source
(e.g., “DVD”).
257
258
Rear Control Panel Operation Replacing the Batteries
Replacing the Batteries
Cover
1.
Remove the rear control panel.
2.
Open the cover.
3.
Change the batteries.
Battery type: BR3032
1 Replacing the Batteries
An improperly disposed of battery can hurt the environment. Always confirm local regulations for battery disposal.
Front Control Panel Operation
Operate the Rear Entertainment System (RES) from the front control panel.
Selecting the Audio Source using front control panel
1.
Press the Rear
9
(Power) button on the front control panel.
2.
Press the REAR AUDIO button.
The rear source is displayed on the front audio screen and the touchscreen.
The rear source is heard from the front speakers.
3.
Select Rear Audio Source on the touchscreen.
4.
Select the audio source icon on the touchscreen.
5.
Select a station, channel, track, or chapter in the same way as the front audio system.
259
Front Control Panel Operation Rear System Setup
Rear System Setup
H
SETTINGS button Rear Ent Settings
1.
Rotate i
to select an item. Press u
.
2.
Rotate i
to select an option.
Press u
.
260
The following items are available:
• Source Select Popup : Selects whether the list of selectable audio sources comes on when the AUDIO button is pressed.
• Rear Control : Sets whether to use the rear control panel to control the RES.
On (factory default): Operates the RES using the rear control panel.
Off : Disables the feature.
• Rear Speaker : Sets the front audio source to play through the rear speakers, even when the RES is on. The RES source can only be heard through the wireless headphones.
On (factory default): Outputs the sound of the front source to the rear speakers.
Off : Disables the feature.
• Single/Dual Screen Mode (Ultrawide RES only): Selects a source to continue playing when you switch from dual mode to single mode on the overhead screen.
Rotate i
to select a source and press u
.
Front Control Panel Operation Setting the DVD Menu
Setting the DVD Menu
Interface Dial
H
MENU button (in DVD mode)
1.
Rotate i
to select an item. Press u
.
Select Other Function to display additional menu entries.
2.
Rotate i to select an option.
Press u
.
The following items are available:
• Top Menu : Displays the top menu of the DVD.
• Menu : Displays the menu of the DVD.
• Repeat :
Repeat Title : Repeats the current title.
Repeat Chapter : Repeats the current chapter.
• Change Source : Changes the audio source mode.
261
Front Control Panel Operation Setting the DVD Menu
• Play/Pause : Pauses or resume the playback.
• Stop : Stops the playback.
• Audio/Subtitle : Selects the language of the DVD audio and the DVD subtitle.
• Angle : Selects the angle of a scene shot with multiple cameras.
• Return : Hides the DVD menu.
• Number Input : Enters a number of a title or chapter to skip.
• Search : Skips to a title or chapter by Interface Dial.
Touchscreen
1.
Select More .
2.
Select a setting item.
262
The following items are available:
• Sound Settings : Displays the sound preferences screen.
• Stop : Stops the playback.
• Repeat :
Repeat Title : Repeats the current title.
Repeat Chapter : Repeats the current chapter.
• Screen Settings : Displays the screen preferences screen.
2 Changing the Screen Settings P. 82
Wireless Headphones
Using the Wireless Headphones
Audio for the Rear Entertainment System is sent to the wireless headphones that come with the system.
1.
Pivot the earpieces outward.
1 Using the Wireless Headphones
When you remove the headphones, the earpieces automatically pivot inward, and the headphones turn off. When not in use, store the headphones in the back pocket of either front seat.
You can use wired headphones through the auxiliary input jacks.
2 Auxiliary Console Panel P. 244
2.
Adjust the volume by turning the dial on the bottom of the right earpiece.
3.
Wear the headphones correctly with the left and right earpieces on the correct sides.
L (left) and R (right) are marked on the sides of the frame.
Volume Dial
263
264
Wireless Headphones Changing the Sound Source (Ultrawide RES only)
Changing the Sound Source (Ultrawide RES only)
■
Wireless Headphone
In dual screen mode, you can switch the sound source of the wireless headphones between the left and right side screens.
Slide the tab to ”L” for the left side, or “R” for the right side.
1 Changing the Sound Source (Ultrawide RES only)
You can switch the sound source from the setup menu if you connected a set of wired headphones.
1.
Press the SETUP button on the rear control panel.
2.
Select Wired Headphones . Press the ENTER button.
3.
Select Left or Right to switch the sound source. Press the ENTER button.
Tab
Wireless Headphones Replacing the Batteries
Replacing the Batteries
Cover
Coin
1.
Insert a coin in the slot and twist it slightly to pry the cover away from the earpiece.
2.
Pull the cover outward, and pivot it out of the way.
1 Replacing the Batteries
The battery is under the cover on the left earpiece.
An improperly disposed of battery can hurt the environment. Always confirm local regulations for battery disposal.
If static is heard in the headphones, try replacing the battery.
3.
Remove the battery.
4.
Install the new battery in the earpiece as shown in the diagram next to the battery slot.
Battery Type: AAA battery
5.
Slide the cover back into place on the earpiece, then press down on the back edge to lock it in place.
Battery
265
266
Other Features
This section describes the useful functions incorporated into the navigation system to help make your journey easier and more enjoyable.
Trip Computer ....................................... 268
Calendar ................................................ 269
Information Functions .......................... 270
System Device Information ................... 270
Map Data Update ................................ 270
Info Screen Preference ......................... 271
Multi-view Rear Camera ....................... 272
About Your Multi-View Rear Camera ... 272
267
Trip Computer
H
INFO button
Trip Computer
View the distance traveled and average fuel consumption.
Move w or y
to select the trip information.
1 Trip Computer
Displays the following trip information:
• Instant Fuel : The current estimated instant fuel economy.
• Average Fuel : The average fuel economy since the last key cycle.
• 1st, 2nd, 3rd Prev.
: The previous average fuel consumption.
• Range : The estimated distance you can travel on the fuel remaining in the tank.
These values are estimates only.
268
The following items are available:
• Current Drive : Displays the current trip information.
• History of Trip A : Displays information for three previous histories. The information is stored every time you reset Trip A.
• Delete History : Deletes the trip information. Move r
on the Trip A screen to select Delete History , then press u
. You will receive a confirmation message on the screen. Rotate i
to select Yes, then press u
.
Calendar
H
INFO button
Calendar
View the calendar screen.
Move w or y
to select the months of the year.
269
270
Information Functions
System Device Information
H
SETTINGS button Navi Settings Map System Device Information
View database, software, device, and vehicle identification information.
1 System Device Information
You will need this information when ordering a map update.
2 Obtaining a Navigation Update P. 295
Map Data Update
H
SETTINGS button Navi Settings Map Map Data Update
Check the map data update status when updating the map database.
1 Map Update Status
This operation is only available during a database update.
2 Obtaining a Navigation Update P. 295
Info Screen Preference
H
SETTINGS button Info Settings Other Info Screen Preference
Select the top menu when the INFO button is pressed.
Rotate i
to select your desired setting item. Press u
.
Information Functions Info Screen Preference
The following options are available:
• Info Top : A brief menu pops up.
• Info Menu (factory default): A full menu pops up.
• Off : A menu does not pop up.
271
272
Multi-view Rear Camera
About Your Multi-View Rear Camera
The navigation screen can display your vehicle’s rear view. The display automatically changes to the rear view when the shift lever is moved to Reverse.
■
Multi-View Rear Camera Display Area
Bumper
Guidelines
Approx. 118 inches (3 m)
Approx. 79 inches (2 m)
Approx. 39 inches
(1 m)
1 About Your Multi-View Rear Camera
The rear camera view is restricted. You cannot see the corner ends of the bumper or what is underneath the bumper. Its unique lens also makes objects appear closer or farther than they actually are.
Visually confirm that it is safe to drive before backing up. Certain conditions (such as weather, lighting, and high temperatures) may also restrict the rear view. Do not rely on the rearview display which does not give you all information about conditions at the back of your vehicle.
If the camera lens is covered with dirt or moisture, use a soft, moist cloth to keep the lens clean and free of debris.
Camera
Approx. 39 inches (1 m)
Approx. 20 inches
(50 cm)
Approx. 79 inches (2 m)
Approx. 118 inches (3 m)
You can view three different camera angles on the rearview display. Press the interface dial to switch the angle.
If Top View is last used before you turn the power mode to OFF, Wide mode is selected next time you turn the power on and move the shift lever to Reverse.
Multi-view Rear Camera About Your Multi-View Rear Camera
■
Multi-View Rear Camera Settings
H
SETTINGS button
Camera Settings
Fixed Guideline
Rotate i to select an item. Press u
.
The following items are available:
• On (factory default): Guidelines appear when you shift into Reverse.
• Off : Guidelines do not appear.
273
274
Troubleshooting
Troubleshooting ................................... 276
Map, Voice, Entering Destinations ........ 276
Traffic .................................................. 278
Guidance, Routing ............................... 279
Update, Coverage, Map Errors ............. 281
Display, Accessories.............................. 281
Miscellaneous Questions ...................... 281
Error Messages ...................................... 282
Navigation System................................ 282
CD Player ............................................. 283
Hard Disc Drive (HDD) Audio ................ 284
iPod®/USB Flash Drive.......................... 285
Pandora® ............................................ 286
Aha TM Radio ......................................... 287
275
276
Troubleshooting
Map, Voice, Entering Destinations
The Startup Confirmation screen is displayed every time I start the car.
Problem
The navigation system reboots by itself (returns to the opening screen).
How do I specify a destination when an entered city or street could not be found?
Why do some letters become grayed out when I enter an address?
How do I delete Personal Addresses, Previous
Destinations, or the Home Address?
I cannot hear the navigation system voice.
The voice control system is having difficulty recognizing my voice commands.
I cannot give voice commands.
Solution
This is normal. The Startup Confirmation screen reminds you and your guest drivers to always operate the navigation system in a safe manner. The Startup Confirmation screen goes off after a certain period of time and the top screen of the last mode is displayed.
A reboot can be caused by extreme temperatures or shock from bumpy roads, and does not necessarily indicate a problem. If this happens frequently, please see a dealer.
• Try entering the street first. Some cities are lumped in with a major metro area. In rural “unverified” areas or new subdivisions, streets may be missing or only partially numbered.
• Try selecting the destination directly from the map.
As you enter each letter in an address or a place/landmark, the navigation system looks in the database to see what letters are possible and grays out letters that do not apply.
1.
Press the SETTINGS button. Select Navi Settings > Personal Info to display the types of information.
2.
Select the type of address to delete.
3.
Select Delete .
1.
Press the SETTINGS button. Select System Settings and check that Volume is not set to 0 .
2.
Select Voice Rec.
and set Voice Prompt to On .
• Check that the vents are not blowing air onto the microphone on the ceiling, the vehicle is as quiet as possible, and you are using the correct command when speaking.
• Say d
“Voice Help” on any screen to see a list of the applicable voice commands.
Make sure you selected OK at the Startup Confirmation screen.
Troubleshooting Map, Voice, Entering Destinations
Problem Solution
I cannot select an option using the Interface Dial.
The navigation system pronunciation of street names in the guidance command or destination address sounds strange.
The screen is bright when I drive at night.
The screen is dark when I drive during the day.
How do I change or remove my PIN?
To reduce potential driver distraction, certain onscreen functions and features are limited or inoperable while the vehicle is moving. Use voice commands or pull over to proceed.
The basic guidance phrases use a studio-recorded voice, but street names are pronounced using a machine-generated voice. Consequently, the name may be mispronounced or sound strange at times.
1.
Check that the nighttime dashboard brightness control is not set to maximum.
2.
Press the SETTINGS button. Select Navi Settings > Map > Color (Night) . Set the
Night color to Black for the best contrast.
2 Switching Display Mode Manually P. 70
Press the SETTINGS button. Select Navi Settings > Map > Color (Day) . Set the Day color to White for the best contrast.
2 Switching Display Mode Manually P. 70
1.
Press the SETTINGS button. Select Navi Settings > Personal Info > PIN Number >
Address Book PIN or Go Home PIN .
2.
Enter your existing PIN. You then have the choice to change or remove the PIN.
I have forgotten my PIN. How do I reset the PIN for
Home or the PIN for personal addresses?
A dealer must reset the PIN for you.
Why is Call grayed out on the Calculate Route screen? Your phone is not paired to Bluetooth ® HandsFreeLink® or, if paired, your phone is in use.
2 Bluetooth ® HandsFreeLink® P. 202
277
278
Troubleshooting Traffic
Traffic
Problem
My FM Traffic is missing or is not displaying properly.
What is wrong?
The navigation system sometimes provides a detour route when I am driving a route on the freeway.
The navigation system routes me to an exit and an alternate freeway with unknown flow speeds or surface streets.
How can I ignore the detour route and return to the original route?
Solution
Verify the following:
• FM Traffic relies on a clear FM signal. If signal strength is low, traffic data may not be available.
• Check the traffic icons and traffic flow on the Navi Settings.
• It is possible that there is a temporary technical problem with your metropolitan area traffic.
You can call Honda Automobile Customer Service to see if there is an outage.
2 Honda Automobile Customer Service Contact Information P. 294
• If the situation persists, see your Honda dealer for assistance.
If Traffic Rerouting is set to On , the navigation system provides a detour route to your destination only if it can find a significantly faster route than the original one.
The navigation system predicts which route should be faster based on freeway congestion along your route. Use your own experience to determine whether the alternate route would be faster.
Press the SETTINGS button. Select Navi Settings > Routing , and set Traffic
Rerouting to Off .
Troubleshooting Guidance, Routing
Guidance, Routing
The navigation system does not route me the same way I would go or the same way as other mapping systems.
The navigation system wants to route me around potential traffic problems. How do I stop these pop-up messages?
Problem
The street I’m on is not shown on the map screen.
The vehicle position icon is not following the road and the “GPS icon” text in the upper left hand corner of the screen is white or missing.
Solution
The navigation system attempts to generate the optimal route. You can change the route preferences used when calculating a route.
Press the SETTINGS button. Select Navi Settings > Routing , and set Traffic
Rerouting to Off .
The mapping database is constantly undergoing revision. You can access the most recent information on the internet.
• Check that the GPS antenna (located in the dashboard) is not blocked. For best reception, remove items from the dashboard, such as radar detectors, cell phones, or loose articles.
• Metallic tinting or other aftermarket devices can interfere with the GPS reception.
Please consult a dealer.
Your route has entered an unverified area.
The blue highlighted route and voice guidance stopped or turned into a blue/pink line before I got to my destination.
How do I stop the map from rotating as I drive along?
Press the SETTINGS button. Select Navi Settings > Map > View > North-Up , or say d
“Display north-up” to change the map orientation.
The “time to destination” display sometimes increases even though I am getting closer to my destination.
If your speed reduces due to slower traffic, the navigation system updates the “time to destination” based on your actual road speed to give you a better estimate of arrival time.
The vehicle position icon on the map “lags” a short distance behind, especially when I arrive at an intersection.
This is normal. The navigation system is unaware of the width of intersections. Large differences in vehicle position can indicate a temporary loss of the GPS signal.
Continued 279
280
Troubleshooting Guidance, Routing
Problem
The screen is showing white dots as I drive along.
How do I remove the white dots (“breadcrumbs”) from my screen?
A road that I selected to avoid is being used when routing.
Solution
These dots are called “breadcrumbs.” These are displayed if Display Tracking is set to
On .
Press the SETTINGS button. Select Navi Settings > Map , set Display Tracking to Off or select Delete Tracking to remove the white dots from the map.
When you “draw” your area to avoid, make sure to select sections of roads that include at least one intersection.
This is normal. The elevation can vary ±100 feet due to GPS calculation errors.
My elevation (shown when I display the current position) seems to fluctuate even though my elevation has not changed.
My elevation is missing on the “current position” screen.
The elevation is only displayed if the GPS antenna can receive signals from at least four satellites. Try moving the vehicle into an open area. The elevation is also not displayed if the calculated elevation is zero or below sea level.
Troubleshooting Update, Coverage, Map Errors
Update, Coverage, Map Errors
Problem
My city is not part of a fully verified detailed coverage area.
Does the navigation system work outside North
America?
How do I report errors I find in the database?
Solution
The mapping database is constantly undergoing revision. You can access the most recent information on the internet.
The navigation system contains maps for the 50 U.S. states, Canada, Puerto Rico, and
Mexico. The navigation system will not work in other countries.
Minor errors are bound to occur in a large database. If you encounter major errors, see
Display, Accessories
Problem
The display appears dim when starting the car in really cold weather.
Solution
This is normal. The display will become brighter after a few minutes.
Miscellaneous Questions
Problem
My battery was disconnected or went dead, and the navigation system is asking for a code.
Solution
Set the power mode to ON, and press and hold the
9
(Power) button for two seconds. The system should reactivate. If you have installed an aftermarket system, contact a dealer.
281
282
Error Messages
Navigation System
Error Message
The display temperature is too high. For protection, the system will shut off until the display cools down.
System temp is low. System will shut down until it warms up.
The navigation system temperature is too low. For protection, the system will shut off until it warms up.
The navigation system atmospheric pressure is too low. For protection, the system will shut off until the pressure returns to safe levels.
Solution
This message appears briefly when the display temperature is too high. The navigation system turns off until the display cools down. The system turns back on automatically when the display cools down.
The navigation system has difficulty reading the HDD when the temperature is below approximately -22°F (-30°C). The navigation system starts up automatically when the display warms up.
The HDD is inoperable due to low atmospheric pressure. Move your vehicle to the place where the atmospheric pressure is high.
The navigation system temperature is too high. For protection, the system will shut off until it cools down.
The navigation system has difficulty reading the HDD when the temperature is high.
The navigation system starts up automatically when the system cools down.
System temp is too high. System will shut down until it cools down.
HDD access error. Please consult your dealer.
HDD access error. The system will reset and attempt to correct the problem.
Writing of the data to the HDD failed with a cause other than low temperature, high temperature, and low atmospheric pressure. After a short wait, try to operate the system again. If this does not solve the problem, consult with the dealer.
Error Messages CD Player
CD Player
If a disc error occurs, you may see the following error messages.
Error Message
Unplayable File
Bad Disc
Please Check Owner’s Manual
Push Eject
Mecha Error
Bad Disc
Please Check Owner’s Manual
Cause
Mechanical error
Servo error
Solution
Track/file format not supported
• Current track/file will be skipped. The next supported track/file plays automatically.
• Press the (eject) button and remove the disc, and check that the error message is cleared.
• Check that the disc is not damaged or deformed, and insert the disc again.
• If the error message reappears, press the button, and pull out the disc.
• Insert a different disc.
If the new disc plays, there is a problem with the first disc.
• If the error message repeats, or the disc cannot be removed, contact a dealer.
Do not try to force the disc out of the player.
Check Disc
Heat Error
Disc error
High temperature
• Check that the disc is not damaged or deformed.
• Turn the audio system off and allow the player to cool down until the error message is cleared.
283
284
Error Messages Hard Disc Drive (HDD) Audio
Hard Disc Drive (HDD) Audio
If an error occurs while playing the Hard Disc Drive (HDD) Audio, you may see the following error messages. If you cannot clear the error message, contact a dealer.
Error Message Solution
HDD access error.
Please consult your dealer.
—
The display system temperature is too high. For protection, the system will shut off until the display cools down.
Turn the audio system off and allow the player to cool down until the error message is cleared.
The navigation system temperature is too low. For protection, the system will shut off until it warms up.
Unplayable File
The navigation system has difficulty reading the HDD when the temperature is below approximately -22°F (-30°C). The navigation system starts up automatically when the display warms up.
Appears when a file format not supported. Current track will be skipped. The next supported track plays automatically.
Error Messages iPod®/USB Flash Drive
iPod®/USB Flash Drive
If an error occurs while playing an iPod® or USB flash drive, you may see the following error messages. If you cannot clear the error message, contact a dealer.
Error Message Solution
USB Error
Incompatible USB Device
Please Check Owner’s Manual
Unsupported Version
Connect Retry
Appears when there is a problem with the audio system. Check if the device is compatible with the audio system.
Appears when an incompatible device is connected. Disconnect the device. Then turn the audio system off, and turn it on again. Do not reconnect the device that caused the error.
Appears when an unsupported iPod® is connected. If it appears when a supported iPod® is connected, update the iPod® software to the newer version.
Appears when the system does not acknowledge the iPod®. Reconnect the iPod®.
Unplayable File
No Data
Unsupported
Appears when the files in the USB flash drive are DRM or an unsupported format. This error message appears for about 3 seconds, then plays the next song.
iPod®
Appears when the iPod® is empty.
USB flash drive
Appears when the USB flash drive is empty or there are no MP3, WMA, or AAC files in the USB flash drive.
iPod® and USB flash drive
Check that compatible files are stored on the device.
Appears when an unsupported device is connected. If it appears when a supported device is connected, reconnect the device.
285
286
Error Messages Pandora®
Pandora®
If an error occurs while playing Pandora®, you may see the following error messages.
If you cannot clear the error message, contact a dealer.
Incompatible USB Device
Error Message
Please Check Owner’s Manual
Navigation Screen
There is no station list in the device.
Please add the station list to your device.
Touchscreen
No stations have been created.
Please create a station on the device.
Solution
Appears when an incompatible device is connected. Disconnect the device. Then turn the audio system off, and turn it again. Do not reconnect the device that caused the error.
Appears when there is no station list on the device. Use the device to create a station.
Music licenses force us to limit the number of tracks you may skip each hour.
Appears when you try to skip a song or select Dislike over the predetermined number of times in an hour.
Unable to save rating.
Unable to save bookmark or
Unable to skip
Appears when the commanded operation is failed. Try again later.
No data
PANDORA ver unsupport
PANDORA system maintenance
Cannot connect to PANDORA when stopped. Check your mobile phone
Appears when no data is available with Pandora® activated. Reboot the app and reconnect the device.
Appears when Pandora® version is not supported. Update Pandora® to the latest version.
Appears when the Pandora® server is in maintenance. Try again later.
Appears when Pandora® is unable to play music. Check your device.
Error Messages Aha TM Radio
Aha
TM
Radio
If an error occurs while playing Aha TM Radio, you may see the following error messages.
If you cannot clear the error message, contact a dealer.
Error Message
Cannot connect to HondaLink. When stopped, check your mobile device.
Solution
Appears when the Aha TM app is not activated. Check your device.
Incompatible USB Device
Please Check Owner’s Manual
Appears when an incompatible device is connected. Disconnect the device. Then turn the audio system off, and turn it on again. Do not reconnect the device that caused the error.
287
288
Reference Information
System Initialization ..............................290
Entering the Security Code....................290
Acquiring GPS Information....................290
Startup Confirmation Screen .................291
Map Matching ......................................291
System Limitations ................................292
GPS System...........................................292
Address Calculation ..............................292
Database ..............................................292
Customer Assistance .............................294
Resolving Problems ...............................294
Reporting Errors ....................................294
Honda Automobile Customer Service
Contact Information............................294
Visiting a Dealer ................................... 294
Map Coverage ..................................... 295
Obtaining a Navigation Update ............ 295
Traffic Information ............................... 296
Operation in Alaska, Hawaii, Canada,
Puerto Rico, and Mexico ..................... 296
Legal Information ................................. 297
Copyrights ........................................... 297
User Agreements ................................. 297
As required by the FCC ........................ 303
289
290
System Initialization
The navigation system must be initialized if power to the navigation system is interrupted for any reason (e.g., the battery was disconnected).
Entering the Security Code
In most cases, you do not need to enter a security code. Follow the steps to reactivate the system.
1.
Set the power mode to ON, and turn on the audio system.
2.
Press and hold the
9
(Power) button for more than two seconds.
The system is reactivated when the system’s control unit recognizes that the system is in your vehicle.
If the control unit fails to recognize, you must go to a dealer and have the system checked.
Acquiring GPS Information
Depending on the length of time the power was interrupted, your system may require GPS initialization.
If initialization is not necessary, the system proceeds directly to the Startup
Confirmation screen.
If the system fails to locate a sufficient number of satellites to locate your position within 10 minutes, the following screen is displayed.
System Initialization Startup Confirmation Screen
If you are experiencing GPS reception problems:
Startup Confirmation
Screen
The Startup Confirmation screen is displayed when initialization has successfully completed. It is displayed every time you start your vehicle. Press u
to select OK to continue.
Map Matching
Map matching is the process of using the acquired GPS information to locate your position on the map screen. If you are on a mapped road, the name of the road is displayed along the bottom of the map screen when map matching is completed.
Do not enter a destination until the road name is displayed.
The system may initially show your location on a different street (e.g., in urban areas where streets are close together), may show an incorrect elevation, or may delay the display of the vehicle position icon at intersections. This is normal; the system will correct itself while you drive.
291
System Limitations
292
GPS System
The signals received from the GPS satellites are extremely weak (less than a millionth of the strength of a local FM station) and require an unobstructed view of the sky.
The GPS antenna is located in the dashboard. The signal reception can easily be interrupted or interfered with by the following:
• Metallic window tint on the front or side windows
• Cell phones, PDAs, or other electronic devices docked in a cradle or lying loose on the dashboard
• Remote starters or “hidden” vehicle tracking systems mounted near the navigation unit
• Audio electronic devices mounted near the navigation unit
• Trees, tall buildings, freeway overpasses, tunnels, or overhead electrical power wires
The GPS is operated by the U.S.
Department of Defense. For security reasons, there are certain inaccuracies built into the GPS for which the navigation system must constantly compensate. This can cause occasional positioning errors of up to several hundred feet.
Database
Address Calculation
The destination icon shows only the approximate location of a destination address. This occurs if the number of possible addresses is different from the number of actual addresses on a block. For example, the address 1425 on a 1400 block with 100 possible addresses
(because it is followed by the 1500 block) will be shown a quarter of the way down the block by the system. If there are only
25 actual addresses on the block, the actual location of address 1425 would be at the end of the block.
The digitized map database reflects conditions as they existed at various points in time before production. Accordingly, your database may contain inaccurate or incomplete data or information due to the passage of time, road construction, changing conditions, or other causes.
For example, some places/landmarks may be missing when you search the database because the name was misspelled, the place was improperly categorized, or a place/landmark is not yet in the database.
This is also true for police stations, hospitals, and other public institutions. Do not rely on the navigation system if you need law enforcement or hospital services.
Always check with local information sources.
In addition, the map database contains verified and unverified areas. Unverified streets may be missing from the map, in the wrong location, or have an incorrect name or address range. A message will warn you if your route includes unverified streets. Exercise additional caution when driving in unverified areas.
The database does not include, analyze, process, consider, or reflect any of the following categories of information:
• Neighborhood quality or safety
• Population density
• Availability or proximity of law enforcement
• Emergency, rescue, medical, or other assistance
• Construction work, zones, or hazards
• Road and lane closures
• Legal restrictions (such as vehicular type, weight, load, height, and speed restrictions)
• Road slope or grade
• Bridge height, width, weight, or other limits
• Traffic facilities safety
• Special events
• Pavement characteristics or conditions
Every effort has been made to verify that the database is accurate. The number of inaccuracies you experience increases the longer you go without obtaining an updated map database.
2 Obtaining a Navigation Update P. 295
We assume no liability for any incident that may result from an error in the program, or from changed conditions not noted above.
System Limitations Database
293
294
Customer Assistance
Resolving Problems
If you run into a specific issue that you cannot resolve, consult the following help resources:
• For navigation system issues:
There are also FAQs available online at www.hondanavi.com.
• For traffic-related issues:
• For reporting issues with the database or places/landmarks:
• Call Honda Automobile Customer
Service.
2 Honda Automobile Customer Service
Reporting Errors
You can help to improve database accuracy by reporting any errors you encounter.
• Report errors in freeways and main
“verified” roads shown in black on the map at http://mapreporter.navteq.com/ dur-web-external/ .
• Please do not report errors in purple
“unverified” roads. Maps for these areas are provided for reference only.
• Please do not report errors in places/ landmarks, such as changes in business names. Information about points of interest are constantly being updated.
An updated database is available for purchase, usually in the fall of each year.
2 Obtaining a Navigation Update P. 295
• For vehicle position icon errors, screen error messages, or other GPS-related errors:
Honda Automobile
Customer Service Contact
Information
Honda Navi
American Honda Motor Co., Inc.
Honda Automobile Customer Service
Mail Stop 500-2N-7E
1919 Torrance Blvd.
Torrance, CA 90501-2746
Tel: (800) 999-1009
Fax: (310) 783-3273
Visiting a Dealer
If you have a question that you cannot resolve using the available help resources, you can consult a dealer. Please identify the specific issue (e.g., error occurs when you enter a specific address, when driving on a certain road, or just when it’s cold) so that the service technician can refer the issue to the factory so that a solution can be found. Be patient, the service technician may be unfamiliar with your specific issue.
Customer Assistance Map Coverage
Map Coverage
The navigation system provides map coverage for the United States, Canada,
Puerto Rico, and Mexico. The map coverage consists of accurately mapped
(verified) metropolitan areas and a less accurate (unverified) rural database. Note that unverified areas are constantly being reviewed and converted to verified areas each year.
Map coverage update information is available from Honda Automobile
Customer Service or online at www.hondanavi.com
.
To find navigation system update information:
1.
Visit www.hondanavi.com
.
2.
Enter your vehicle model and model year.
3.
Click Map Coverage to display a list of verified coverage areas on the most recent update.
4.
Click Map Coverage Details to display a
PDF document with a full listing of all coverage areas.
Adobe® Reader® is required for viewing and printing the Portable
Document Format (PDF) documents.
To download the latest version of
Adobe Reader, visit http:// get.adobe.com/reader/ .
Obtaining a Navigation
Update
Honda is continually expanding the scope of the navigation system. Navigation system software upgrades may be made available periodically, usually in the fall of each year.
To purchase an update:
1.
Obtain your vehicle’s VIN number and the System/Device Information.
2 System Device Information P. 270
2.
Call the Honda Navigation Disc
Fulfillment Center at (888) 291-4675, or order online at www.hondanavi.com
.
An update is not available from a dealer.
However, the dealer may assist you in obtaining one for you out of courtesy.
There is no program for free updates.
295
296
Customer Assistance Traffic Information
Traffic Information
• Continuously updated traffic information is available in major metropolitan areas across the 48 contiguous states and some cities in
Canada. A list of coverage areas is available online.
• Visit automobiles.honda.com/traffic for a complete listing of coverage areas and other information.
Operation in Alaska,
Hawaii, Canada, Puerto
Rico, and Mexico
■
Map Coverage
All roads displayed on the map screens are verified roads. Information in this manual relating to “unverified” roads or areas is not applicable.
■
Address and Place Entry
Screens
Entering a destination address or place/ landmark on another island may result in a screen caution message. This is because there are no ferry routes between islands in the database.
■
Puerto Rico and Mexico
If Street Name Guidance is set to On , the street names will not be read out by voice guidance. This may change in a future data update.
Legal Information
Copyrights
• Infogroup-Data: Certain business data provided by Infogroup © 2011, All
RIghts Reserved.
• EXIT-Data: © ZENRIN CO., LTD. 2011.
All rights reserved.
• Building foot print: © ZENRIN CO., LTD.
2011. All rights reserved.
• Junction View Data: © ZENRIN USA,
INC. 2011. All rights reserved.
• Brand icon: The marks of companies displayed by this product to indicate business locations are the marks of their respective owners. The use of such marks in this product does not imply any sponsorship, approval, or endorsement by such companies of this product.
User Agreements
■
Navigation System User
Agreement
In using this HDD “Satellite Linked
Navigation System” (the “HDD”), which includes HONDA MOTOR CO., LTD. software, ALPINE ELECTRONICS, INC. software, and NAVTEQ database contents
(hereinafter referred to as “Licensors”), you are bound by the terms and conditions set forth below. By using your copy of the
HDD, you have expressed your Agreement to the terms and conditions of this
Agreement. You should, therefore, make sure that you read and understand the following provisions. If for any reason you do not wish to be bound by the terms of this Agreement, please return the HDD to your dealer.
• The HDD may not be copied, duplicated, or otherwise modified, in whole or in part, without the express written permission of the Licensors.
• The HDD may not be transferred or sublicensed to any third party for profit, rent or loan, or licensed for reuse in any manner.
• The HDD may not be decompiled, reverse engineered or otherwise disassembled, in whole or in part.
• The HDD may not be used in a network or by any other manner of simultaneous use in multiple systems.
• The HDD is intended solely for personal use (or internal use where the end-user is a business) by the consumer. The HDD is not to be used for commercial purposes.
• The Licensors do not guarantee to the client that the functions included in the
HDD meet the specific objectives of the user.
• Licensor shall not be responsible for any damages caused by the use of the HDD to the actual user or to any third party.
• The warranty on the HDD shall not extend to an exchange or refund due to misspelling, omission of letters, or any other cosmetic discrepancy in the contents of the HDD.
• The right to use the HDD shall expire either when the user destroys the HDD or software, or when any of the terms of this Agreement are violated and the
Licensors exercise the option to revoke the license to use the HDD or software.
Continued 297
Legal Information User Agreements
298
• The terms and conditions hereof apply to all subsequent users and owners as well as to the original purchaser.
• The logos of oil companies, hotels, convenience stores, and other businesses are displayed for your information and convenience, and in no way imply any sponsorship, approval or endorsement of these companies, or their products. The logos are trademarks of their respective owners.
• The marks of companies displayed by this product to indicate business locations are the marks of their respective owners.
• The use of such marks in this product does not imply any sponsorship, approval, or endorsement by such companies of this product.
The user shall indemnify and save harmless the Licensors, and their officers, employees and agents, from and against any claim, demand or action, irrespective of the nature of the cause of the claim, demand or action, alleging loss, costs, expense, damages or injuries (including injuries resulting in death) arising out of the use or possession of the HDD or software.
Use, duplication, or disclosure of this HDD by or on behalf of the United States government is subject to “Restricted
Rights” as set forth at FAR 52.227-14, -19 or DFARS 252.227-7013, as applicable.
Manufacturers are the Licensors, including
HONDA MOTOR CO., LTD., 2-1-1 Minami
Aoyama Minato-Ku Tokyo 107-8556
JAPAN., Alpine Electronics, Inc., 20-1
Yoshima Kogyodanchi, Iwaki, Fukushima
970-1192 JAPAN., NAVTEQ Corporation,
425 W Randolph St. Chicago, IL 60606,
USA.
■
Navigation System END USER
LICENSE AGREEMENT
You have acquired a device (“DEVICE”) that includes software licensed by Alpine
Electronics, Inc. (collectively “ALPINE”) from an affiliate of Microsoft Corporation
(collectively “MS”). Those installed software products of MS origin, as well as associated media, printed materials, and
“online” or electronic documentation
(“SOFTWARE”) are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved.
IF YOU DO NOT AGREE TO THIS END USER
LICENSE AGREEMENT (“EULA”), DO NOT
USE THE DEVICE OR COPY THE SOFTWARE
INSTEAD, PROMPTLY CONTACT ALPINE
FOR INSTRUCTIONS ON RETURN OF THE
UNUSED DEVICE(S) FOR A REFUND. ANY
USE OF THE SOFTWARE, INCLUDING BUT
NOT LIMITED TO USE ON THE DEVICE,
WILL CONSTITUTE YOUR AGREEMENT TO
THIS EULA (OR RATIFICATION OF ANY
PREVIOUS CONSENT).
• GRANT OF SOFTWARE LICENSE
This EULA grants you the following license: You may use the SOFTWARE only on the DEVICE.
• NOT FAULT TOLERANT
THE SOFTWARE IS NOT FAULT
TOLERANT. ALPINE HAS
INDEPENDENTLY DETERMINED HOW TO
USE THE SOFTWARE IN THE DEVICE,
AND MS HAS RELIED UPON ALPINE TO
CONDUCT SUFFICIENT TESTING TO
DETERMINE THAT THE SOFTWARE IS
SUITABLE FOR SUCH USE.
• NO WARRANTIES FOR THE SOFTWARE
THE SOFTWARE is provided “AS IS” and with all faults. THE ENTIRE RISK AS TO
SATISFACTORY QUALITY,
PERFORMANCE, ACCURACY, AND
Legal Information User Agreements
EFFORT (INCLUDING LACK OF
NEGLIGENCE) IS WITH YOU. ALSO,
THERE IS NO WARRANTY AGAINST
INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE OR
AGAINST INFRINGEMENT. IF YOU HAVE
RECEIVED ANY WARRANTIES
REGARDING THE DEVICE OR
SOFTWARE THOSE WARRANTIES DO
NOT ORIGINATE FROM, AND ARE NOT
BINDING ON, MS.
• NO LIABILITY FOR CERTAIN DAMAGES.
EXCEPT AS PROHIBITED BY LAW, MS,
MICROSOFT CORPORATION AND THEIR
AFFILIATES SHALL HAVE NO LIABILITY
FOR ANY INDIRECT, SPECIAL,
CONSEQUENTIAL OR INCIDENTAL
DAMAGES ARISING FROM OR IN
CONNECTION WITH THE USE OR
PERFORMANCE OF THE SOFTWARE.
THIS LIMITATION SHALL APPLY EVEN IF
ANY REMEDY FAILS OF ITS ESSENTIAL
PURPOSE. IN NO EVENT SHALL MS,
MICROSOFT CORPORATION AND/OR
THEIR AFFILIATES BE LIABLE FOR ANY
AMOUNT IN EXCESS OF U.S. TWO
HUNDRED FIFTY DOLLARS
(U.S.$250.00).
• SPEECH RECOGNITION
If the SOFTWARE includes speech recognition component(s), you should understand that speech recognition is an inherently statistical process and that recognition errors are inherent in the process. Neither ALPINE nor its suppliers shall be liable for any damages arising out of errors in the speech recognition process.
• LIMITATIONS ON REVERSE
ENGINEERING, DECOMPILATION, AND
DISASSEMBLY
You may not reverse engineer, decompile, or disassemble the
SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.
• ADDITIONAL SOFTWARE/SERVICES
The SOFTWARE may permit ALPINE, MS,
Microsoft Corporation or their affiliates to provide or make available to you
SOFTWARE updates, supplements, addon components, or Internet-base service components of the SOFTWARE after the date you obtain your initial copy of the
SOFTWARE (“Supplemental
Components”).
If ALPINE provides or makes available to you Supplemental Components and no other EULA terms are provided along with the
Supplemental Components, then the terms of this EULA shall apply.
If MS, Microsoft Corporation or their affiliates make available
Supplemental Components, and no other EULA terms are provided, then the terms of this EULA shall apply, except that MS, Microsoft
Corporation or affiliate entity providing the Supplemental
Component(s) shall be licensor of the
Supplemental Component(s).
ALPINE, MS, Microsoft Corporation and their affiliates reserve the right to discontinue any Internet-based services provided to you or made available to you through the use of the SOFTWARE.
• RECOVERY MEDIA
If SOFTWARE is provided by ALPINE on separate media and labeled “Recovery
Media” you may use the Recovery
Media solely to restore or reinstall the
SOFTWARE originally installed on the
DEVICE.
Continued 299
Legal Information User Agreements
300
• UPGRADES
If the SOFTWARE is provided by ALPINE separate from the DEVICE on separate media or via web download or other means, and is labeled “For Upgrade
Purposes Only” you may install one (1) copy of such SOFTWARE onto the
DEVICE as a replacement copy for the existing SOFTWARE, and use it in accordance with this EULA, including any additional EULA terms accompanying the upgrade SOFTWARE.
• TERMINATION
Without prejudice to any other rights,
ALPINE or MS may terminate this EULA if you fail to comply with the terms and conditions of this EULA. In such event, you must destroy all copies of the
SOFTWARE and all of its component parts.
• INTELLECTUAL PROPERTY RIGHTS
All title and intellectual property rights in and to the SOFTWARE (including but not limited to any images, photographs, animations, video, audio, music, text and “applets,” incorporated into the
SOFTWARE), the accompanying printed materials, and any copies of the
SOFTWARE, are owned by MS,
Microsoft Corporation, their affiliates or suppliers. The SOFTWARE is licensed, not sold.
You may not copy the printed materials accompanying the SOFTWARE. All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. All rights not specifically granted under this EULA are reserved by
MS, Microsoft Corporation, their affiliates and suppliers. Use of any online services which may be accessed through the SOFTWARE may be governed by the respective terms of use relating to such services. If this
SOFTWARE contains documentation that is provided only in electronic form, you may print one copy of such electronic documentation.
• TRADEMARKS
This EULA does not grant you any rights in connection with any trademarks or service marks of ALPINE MS, Microsoft
Corporation, their affiliates or suppliers.
• PRODUCT SUPPORT
Product support for the SOFTWARE is not provided by MS, its parent corporation Microsoft Corporation, or their affiliates or subsidiaries. For product support, please refer to ALPINE support number provided in the documentation for the DEVICE.
Should you have any questions concerning this EULA, or if you desire to contact ALPINE for any other reason, please refer to the address provided in the documentation for the DEVICE.
• SOFTWARE TRANSFER ALLOWED BUT
WITH RESTRICTIONS
You may permanently transfer rights under this EULA only as part of a permanent sale or transfer of the
Device, and only if the recipient agrees to this EULA. If the SOFTWARE is an upgrade, any transfer must also include all prior versions of the SOFTWARE.
• EXPORT RESTRICTIONS
You acknowledge that SOFTWARE is of
US-origin. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration
Regulations, as well as end-user, enduse and country destination restrictions
Legal Information User Agreements issued by U.S. and other governments.
For additional information on exporting the SOFTWARE, see http:// www.microsoft.com/exporting/ .
■
Gracenote Music Recognition
Service (CDDB)
Music recognition technology and related data are provided by Gracenote®.
Gracenote is the industry standard in music recognition technology and related content delivery.
For more information, visit www.gracenote.com
.
When music is recorded to the HDD from a
CD, information such as the recording artist and track name are retrieved from the Gracenote Database and displayed
(when available).
Gracenote may not contain information for all albums.
Gracenote is an internet-based music recognition service that allows artist, album, and track information from CDs to display on the HDD.
Gracenote users are allowed 4 free updates a year. More information about
Gracenote, its features, and downloads are available at www.honda.com
(in U.S.) or www.honda.ca
(in Canada).
CD and music-related data from
Gracenote, Inc., copyright © 2000 to present Gracenote. Gracenote Software, copyright © 2000 to present Gracenote.
One or more patents owned by Gracenote apply to this product and service. See the
Gracenote website for a non-exhaustive list of applicable Gracenote patents.
Gracenote, CDDB, MusicID, MediaVOCS, the Gracenote logo and logotype, and the
“Powered by Gracenote” logo are either registered trademarks or trademarks of
Gracenote in the United States and/or other countries.
■
Gracenote® END USER
LICENSE AGREEMENT
This application or device contains software from Gracenote, Inc. of
Emeryville, California (“Gracenote”). The software from Gracenote (the “Gracenote
Software”) enables this application to perform disc and/or file identification and obtain music- related information, including name, artist, track, and title information (“Gracenote Data”) from online servers or embedded databases
301
Legal Information User Agreements
302
(collectively, “Gracenote Servers”) and to perform other functions. You may use
Gracenote Data only by means of the intended End-User functions or this application or device.
You agree that you will use Gracenote
Data, the Gracenote Software, and
Gracenote Servers for your own personal non-commercial use only.
You agree not to assign, copy, transfer, or transmit the Gracenote Software or any
Gracenote Data to any third party.
YOU AGREE NOT TO USE OR EXPLOIT
GRACENOTE DATA, THE GRACENOTE
SOFTWARE, OR GRACENOTE SERVERS,
EXCEPT AS EXPRESSLY PERMITTED
HEREIN.
You agree that your non-exclusive license to use the Gracenote Data, the Gracenote
Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the
Gracenote Software, and Gracenote
Servers.
Gracenote reserves all rights in Gracenote
Data, the Gracenote Software, and the
Gracenote Servers, including all ownership rights. Under no circumstances will
Gracenote become liable for any payment to you for any information that you provide. You agree that Gracenote, Inc. may enforce its rights under this
Agreement against you directly in its own name.
The Gracenote service uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the
Gracenote service to count queries without knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the
Gracenote service.
The Gracenote Software and each item of
Gracenote Data are licensed to you “AS
IS.”
Gracenote makes no representations or warranties, express or implied, regarding the accuracy of any Gracenote Data from in the Gracenote Servers. Gracenote reserves the right to delete data from the
Gracenote Servers or to change data categories for any cause that Gracenote deems sufficient. No warranty is made that the Gracenote Software or Gracenote
Servers are error-free or that functioning of
Gracenote Software or Gracenote Servers will be uninterrupted.
Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in the future and is free to discontinue its services at any time.
GRACENOTE DISCLAIMS ALL
WARRANTIES EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO,
IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, TITLE, AND
NONINFRINGEMENT. GRACENOTE DOES
NOT WARRANT THE RESULTS THAT WILL
BE OBTAINED BY YOUR USE OF THE
GRACENOTE SOFTWARE OR ANY
GRACENOTE SERVER. IN NO CASE WILL
GRACENOTE BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL
DAMAGES OR FOR ANY LOST PROFITS OR
LOST REVENUES.
copyright © 2000 to present Gracenote
As required by the FCC
1.
This device complies with Part 15 of the
FCC Rules and Canadian RSS-210/
RSSGen. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
2.
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by the party responsible for compliance may void the user’s authority to operate the equipment.
3.
This product emits radio frequency energy, but the radiated output power of this device is far below the FCC and
IC radio frequency exposure limits. This equipment complies with FCC and IC RF radiation exposure limits set forth for an uncontrolled environment. Nevertheless, the device should be used in such a manner that the potential for human contact with the antenna during normal operation is minimized.
Legal Information As required by the FCC
303
304
Voice Commands
Voice Commands .................................. 306
Navigation Commands ......................... 306
Voice Portal Commands ....................... 308
Phone Commands................................ 308
Info Commands ................................... 309
Climate Control Commands ................. 309
Audio Commands ................................ 310
On-Screen Commands ......................... 314
Spelling Assistance ............................... 314
305
306
Voice Commands
Navigation Commands
The system accepts these commands on a map/guidance screen.
■
General Commands
Display phone (equivalent to PHONE)
Display audio (equivalent to AUDIO)
Display navigation (if en route, displays the Route screen)
Display information (equivalent to INFO)
Display menu (equivalent to MENU. if en route, displays Route Options)
Display setting (equivalent to SETTING)
Display map
Display map guide (when en route, shows the next guidance point)
Display rear audio
Display front audio
Cancel
What time is it?
What is today’s date?
Voice help (displays commands for current screen)
■
Map Display Commands
Display current location (shows current latitude, longitude, and elevation)
Display/Hide (specify icon type):
ATM gas station restaurant post office grocery store lodging (hotel, motel) parking garage parking lot school hospital freeway exit information traffic traffic speeds traffic icons traffic incidents
Go home
Register the current location (stores current location in the Address Book)
■
Map Scale Commands
Display north up
Display heading up
Display 3D map
Display zoom in
Display zoom out
Display (specify scale):
1/20 mile (80 m) scale
1/8 mile (200 m) scale
1/4 mile (400 m) scale
1/2 mile (800 m) scale
1 mile (1600 m) scale
2 mile (3 km) scale
5 mile (8 km) scale
15 mile (24 km) scale
50 mile (80 km) scale
150 mile (240 km) scale
350 mile (560 km) scale
1000 mile (1600 km) scale
Max zoom in
Max zoom out
■
Find Place Commands
Find nearest (specify place):
Fuel and auto
Honda dealers
Acura dealers
Gas station
Hydrogen station
Auto parts & electronics
Auto repair & maintenance
Car wash & detailing
Motorcycle dealers
Other car dealers
Roadside assistance
ATM and bank
ATM
Bank
Check cashing
Currency exchange
Community
Business
City hall
Civic center
Convention center
Court house
Higher education
Library
Post office
School
Emergency room
Hospital
Police station
Veterinarian
Lodging
Bed & breakfast
Hotel
Resort
Recreation
Amusement park
Golf course
Historical monument
Marina
Movie theater
Museum
Park
Performing arts
Sports complex
Tourist attraction
Restaurant
American restaurant
Californian restaurant
Chinese restaurant
Coffee shop
Continental restaurant
Fast food
French restaurant
Voice Commands Navigation Commands
German restaurant
Greek restaurant
Indian restaurant
Italian restaurant
Japanese restaurant
Korean restaurant
Mexican restaurant
Pizza
Seafood restaurant
Thai restaurant
Vegetarian restaurant
Vietnamese restaurant
Other restaurant
Shopping
Shopping area
Accessory store
Book store
Clothing store
Grocery store
Home improvement store
Mall
Office supply store
Pharmacy
Pet food store
Sewing store
Shoe store
Sporting goods store
Toy store
Continued 307
308
Voice Commands Voice Portal Commands
Travel center
Airport
Automobile club
Bus station
Camping
Commuter rail station
Ferry terminal
Named place
Park & ride
Parking garage
Parking lot
Rental car agency
Rest area
Ski area
Tourist information
Train station
Travel agency
Truck stop
■
Route Commands
The system accepts these commands when a route is set.
How long to the destination?*
How far to the destination?*
Display destination map
Display entire route
Cancel route
Repeat guidance
* These commands are not available if you scroll through the map while en route to a destination.
Voice Portal Commands
The system accepts these commands on the Voice Portal screen.
• Call Your contact name
• Call Phone Number
• Find nearest POI category name
• Go home
• Route menu
• Cancel route
Phone Commands
The system accepts these commands on any screen.
• Call by number
• Call by name
Contacts that are imported from your phone to the vehicle are all made available by voice. Voice Tags can also be recorded for each of your Speed Dial entries.
Voice Commands Info Commands
Info Commands
The system accepts these commands on any screen.
• Trip computer
• Traffic information
• Display clock
• Display wallpaper
Climate Control
Commands
The system accepts these commands on most screens.
• Climate control automatic *1
• Climate control off *1
• Air conditioner on *1
• Air conditioner off *1
• Climate control defrost on *1
• Climate control defrost off *1
• Rear defrost on *1
• Rear defrost off *1
• Climate control fresh air
• Climate control recirculate
• Climate control vent
• Climate control bi-level
• Climate control floor
• Climate control floor and defrost
• Climate control mode automatic
• Fan speed up
• Fan speed down
• Fan speed # (#: 1 to 7)
• Fan automatic
• Rear lock on
• Rear lock off
• Temperature # degrees (#: 57 to 87°F,
15 to 29°C)
• Driver temperature # degrees (#: 57 to
87°F, 15 to 29°C)
• Passenger temperature # degrees (#: 57 to 87°F, 15 to 29°C)
• Temperature up
• Temperature down
• Driver temperature up
• Driver temperature down
• Passenger temperature up
• Passenger temperature down
• Temperature max heat
• Temperature max cool
• Driver temperature max heat
• Driver temperature max cool
• Passenger temperature max heat
• Passenger temperature max cool
• Climate control sync on *1
• Climate control sync off *1
• Front climate control automatic
• Front climate control off
• Rear climate control automatic
• Rear climate control off
• Rear climate control vent
• Rear climate control bi-level
• Rear climate control floor
• Rear fan speed up
• Rear fan speed down
• Rear fan speed # (#: 1 to 5)
• Rear temperature # degrees (#: 57 to
87°F, 15 to 29°C)
• Rear temperature up
• Rear temperature down
• Rear temperature max heat
• Rear temperature max cool
*1: These commands toggle the function on and off, so the command may not match your intended action.
309
Voice Commands Audio Commands
310
Audio Commands
The system accepts these commands on most screens.
■
Using Song By Voice
TM
Song By Voice TM is a feature that allows you to select music from your Hard Disc Drive or iPod® device using your voice.
To activate this mode, you must press the
(Talk) button on the Voice Portal screen and say: “Music search.”
■
Song By Voice
TM
commands
• Music search
• Play album (specify album)
• Play artist (specify artist)
• Play composer (specify composer)
• Play genre (specify genre)
• Play playlist (specify playlist)
• Play song (specify song)
• What am I listening to?
• Who am I listening to?
• Who is this?
• What’s playing?
• Who’s playing?
• What album is this?
■
HDD commands
• Hard Disc Drive play
• Hard Disc Drive play track # (#: 1 to 30)
• Hard Disc Drive skip forward
• Hard Disc Drive skip back
• Hard Disc Drive album up *2
• Hard Disc Drive album down *2
• Hard Disc Drive track up
• Hard Disc Drive track down
• Hard Disc Drive playlist up *2
• Hard Disc Drive playlist down *2
• Hard Disc Drive track random *1
• Hard Disc Drive track repeat *1
• Hard Disc Drive track scan *1
• Hard Disc Drive normal play
• What am I listening to?
• Who am I listening to?
• Who is this?
• What’s playing?
• Who’s playing?
• What album is this?
*1: These commands toggle the function on and off, so the command may not match your intended action.
*2: These commands are available only in the corresponding playback mode.
For example, “Artist” commands are available only in “Artist” mode.
■
Radio commands
• Audio on *1
• Audio off *1
• Radio on *1
• Radio off *1
• Radio select FM
• Radio select AM
• Radio tune to # FM
(#: frequency from 87.7 to 107.9)
• Radio tune to # AM
(#: frequency from 530 [five thirty] to
1710 [seventeen ten])
• Radio seek up
• Radio seek down
• Radio next station
• Radio preset # (#: 1 to 12)
• Radio FM preset # (#: 1 to 12)
• Radio AM preset # (#: 1 to 6)
• Radio scan *1
• Radio select XM
• XM channel #
(#: 0 to 255 [two fifty five])
• XM channel up
• XM channel down
• XM category up
• XM category down
Voice Commands Audio Commands
• XM preset # (#: 1 to 12)
• XM scan *1
• XM category mode
• XM channel mode
*1: These commands toggle the function on and off, so the command may not match your intended action.
NOTE:
Radio volume levels cannot be controlled using voice control.
■
Disc commands
• Disc play
• Disc play track # (#: 1 to 30)
• Disc skip forward
• Disc skip back
• Disc track random *1
• Disc track repeat *1
• Disc track scan *1
• Disc folder up
• Disc folder down
• Disc folder random *1
• Disc folder repeat *1
• Disc folder scan *1
• Disc normal play
*1: These commands toggle the function on and off, so the command may not match your intended action.
■
iPod® commands
• iPod play
• iPod play track # (#: 1 to 30)
• iPod skip forward
• iPod skip back
• iPod track shuffle *1
• iPod album shuffle *1
• iPod track repeat *1
• iPod normal play
• What am I listening to?
• Who am I listening to?
• Who is this?
• What’s playing?
• Who’s playing?
• What album is this?
*1: These commands toggle the function on and off, so the command may not match your intended action.
■
USB commands
• USB play
• USB play track # (#: 1 to 30)
• USB skip forward
• USB skip back
• USB track random *1
• USB track repeat *1
• USB track scan *1
• USB folder up
• USB folder down
• USB folder random *1
• USB folder repeat *1
• USB folder scan *1
• USB normal play
*1: These commands toggle the function on and off, so the command may not match your intended action.
311
Voice Commands Audio Commands
312
■
Bluetooth ® Audio commands
• Bluetooth Audio play
• Bluetooth Audio skip forward
• Bluetooth Audio skip back
• Bluetooth Audio group up
• Bluetooth Audio group down
• Bluetooth Audio pause
• Bluetooth Audio resume
NOTE:
Bluetooth ® Audio commands may not work on some phones or Bluetooth ®
Audio devices.
■
AUX commands
• Auxiliary play
■
Pandora® commands
The system accepts these commands while the Pandora® is playing.
• Pandora play
• Pandora skip forward
• Pandora station up
• Pandora station down
• Pandora pause
• Pandora resume
• Pandora thumbs up
• Pandora thumbs down
■
Aha
TM
Radio commands
The system accepts these commands while the Aha TM is playing.
• Aha radio play
• Aha radio skip forward
• Aha radio skip back
• Aha radio station up
• Aha radio station down
• Aha radio resume
• Aha radio pause
• Aha radio like
• Aha radio dislike
■
Internet service commands
• Internet service play
• Internet service skip forward *1
• Internet service skip back *1
• Internet service station up *1
• Internet service station down *1
• Internet service resume *1
• Internet service pause *1
• Internet service like *1
• Internet service dislike *1
*1: The system accepts these commands while the Internet service is playing.
■
Rear Radio Commands
Rear audio on*
Rear audio off*
Rear radio on*
Rear radio off*
Rear radio select FM
Rear radio select AM
Rear radio tune to # FM (#: frequency, e.g., 95.5)
Rear radio tune to # AM (#: frequency, e.g., 1020)
Rear radio seek up
Rear radio seek down
Rear radio next station
Voice Commands Audio Commands
Rear radio preset # (#: 1 to 12)
Rear radio FM preset # (#: 1 to 12)
Rear radio AM preset # (#: 1 to 6)
Rear radio scan*
Rear radio select XM
Rear XM channel # (#: 0 to 255)
Rear XM channel up
Rear XM channel down
Rear XM category up
Rear XM category down
Rear XM preset # (#: 1 to 12)
Rear XM scan*
Rear XM category mode
Rear XM channel mode
* These commands toggle the function between on and off, so the command may not match your intended action.
NOTE:
Radio volume levels cannot be controlled using voice control.
■
Rear CD Commands
Rear CD play
Rear CD play track # (#: 1 to 30)
Rear CD skip forward
Rear CD skip back
Rear CD track random*
Rear CD track repeat*
Rear CD track scan*
Rear CD normal play (resumes “Play” from the random-, repeat-, or scan-play)
Rear CD folder up
Rear CD folder down
Rear CD folder random*
Rear CD folder repeat*
Rear CD folder scan*
* These commands toggle the function between on and off, so the command may not match your intended action.
■
Rear DVD Commands
Rear DVD play
Rear DVD pause
Rear DVD title up
Rear DVD title down
Rear DVD chapter up
Rear DVD chapter down
Rear DVD title # (#: 1 to 30)
Rear DVD chapter # (#: 1 to 30)
Rear DVD title #1 chapter #2 (#1, #2: 1 to 30)
Rear DVD play track # (#: 1 to 30)
Rear DVD skip forward
Rear DVD skip back
Rear DVD track random*
Rear DVD track repeat*
Rear DVD track scan*
Rear DVD normal play (resumes “Play” from the random-, repeat-, or scan-play)
Rear DVD folder random*
Rear DVD folder repeat*
Rear DVD folder scan*
* These commands toggle the function between on and off, so the command may not match your intended action.
313
314
Voice Commands On-Screen Commands
■
Rear HDD Commands
Rear HDD play
Rear HDD skip forward
Rear HDD skip back
Rear HDD album up
Rear HDD album down
Rear HDD track up
Rear HDD track down
Rear HDD playlist up
Rear HDD playlist down
Rear HDD track random*
Rear HDD track repeat*
Rear HDD track scan*
Rear HDD normal play (resumes “Play” from the random-, repeat-, or scan-play)
* These commands toggle the function between on and off, so the command may not match your intended action.
■
Rear iPod Commands
Rear iPod play
Rear iPod skip forward
Rear iPod skip back
Rear iPod track shuffle*
Rear iPod album shuffle*
Rear iPod track repeat*
Rear iPod normal play (resumes “Play” from the shuffle- or repeat-play)
* These commands toggle the function between on and off, so the command may not match your intended action.
■
Rear AUX Commands
Rear AUX play (or Rear Auxiliary play)
On-Screen Commands
The system accepts these commands on any screen. There are over 100 on-screen commands. Say what is written on the screen to activate that selection. For lists, you can say the list item number to select that item.
Next (or Down)
Previous (or Up)
Return
OK (excluding Startup Confirmation screen)
Delete
Spelling Assistance
The voice control system can also recognize phonetic alphabet input for numbers, letters, accented letters, punctuation marks, and symbols.
NOTE:
When selecting letters using the voice control system, a confirmation box may pop up to confirm the entry.
■
Numbers
■
Letters
7
8
5
6
9
0
3
4
1
2
Say … Say … or Number …
One
Two
Three
Four
Five
Six
Seven
Eight
Nine
Zero
G
H
E
F
C
D
A
B
K
L
J
I
M
Say … Or say…
Apple/Alpha
Boy/Bravo
Charlie
Dog/Delta
Edward/Echo
Frank/Foxtrot
George/Golf
Henry/Hotel
Igloo/India
John/Juliet
King/Kilo
Larry/Lima
Mary/Mike
Voice Commands Spelling Assistance
T
U
R
S
P
Q
N
O
X
Y
V
W
Z
Say … Or say…
Nancy/November
Oscar
Paul/Papa
Queen/Quebec
Robert/Romeo
Sam/Sierra
Tom/Tango
Uncle/Uniform
Victor
William/Whiskey
X-ray
Yellow/Yankee
Zebra/Zulu
315
Voice Commands Spelling Assistance
■
Accented Letters
Ù
Ú
Ô
Ö
Û
Ü
Say … Say … or Symbol …
O circumflex
O umlaut
U grave
U acute
U circumflex
U umlaut
■
Symbols
316
É
Ê
Ç
È
Â
Ä
Á
À
Ï
Î
Í
Ë
Ó
Say … Say … or Symbol …
A acute
A grave
A circumflex
A umlaut
C cedilla
E grave
E acute
E circumflex
E umlaut
I acute
I circumflex
I umlaut
O acute
:
-
*
+
$
#
?
!
/
;
@
&
~
Say … Say … or Symbol …
Question mark
Exclamation point
Dollar
Pound
Asterisk
Plus
Hyphen
Colon
Semicolon
Slash
At sign
Ampersand
Tilde
»
`
^
}
{
<
>
%
_
¡
¿
«
‘
,
.
“
Say … Say … or Symbol …
Dot
Double quote
Comma
Apostrophe
Inverted exclamation point
Inverted question mark
Left-pointing double angle quotation mark
Right-pointing double angle quotation mark
Percent
Underscore
Less than
Greater than
Open brace
Close brace
Caret
Back quote
Voice Commands Spelling Assistance
317
318
List of Categories
Fuel/Auto Lodging Shopping
All Types
Honda Dealers
Acura Dealers
Gas Station
Hydrogen Station
Auto Parts & Electronics
All Types
ATM
Auto Repair & Maintenance
Car Wash & Detailing
Motorcycle Dealers
Other Car Dealers
Roadside Assistance
All Types
Bed & Breakfast
Hotel/Motel
Resort
ATM/Bank
Check Cashing/Money Transfer Marina
Currency Exchange
Golf Course Performing Arts
Historical Monument Sports Complex
Tourist Attraction
Movie Theater
All Types
Accessories/Jewelry
Recreation
All Types
Amusement Park
Museum
Auto Parts & Electronics
Books/Music/Video
Park/Recreation Area Clothing
Shoes/Bags
Groceries
Home Improvement
Travel
Mall/Department Store
Office Supplies/Electronics
Pharmacy/Drug Store
Pet Food/Supplies
Sewing/Linen
Sporting Goods
Toys/Arts/Crafts
Bank Restaurant All Types Parking Garage/House
Community
All Types
Business
Court House
Higher Education
City Hall Library
Civic/Community Center Post Office
Convention/Exhibition Center School
Emergency
All Types
Hospital
Police Station
Roadside Assistance
Veterinarian
All Types
American
Café/Coffee shop
Californian
Chinese
Continental
Fast Food
French
German
Greek
Indian
Italian
Japanese
Korean
Mexican
Pizza
Seafood
Thai
Vegetarian
Vietnamese
Other
Airport
Automobile Club
Bed & Breakfast
Bus Station
Camping
Commuter Rail Station
Ferry Terminal
Hotel/Motel
Named Place
Park & Ride
Parking Lot
Rental Car Agency
Resort
Rest Area
Ski Area
Tourist Attraction
Tourist Information
Train Station
Travel Agency
Truck Stop/Plaza
Abubasia
Language
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Belarussian
Bengali
Bhutanese
Bihari
Bislama
Breton
Bulgarian
Burmese
Cambodian
Catalan
Chinese
List of Language Codes
0208
0209
0218
0207
1325
1113
0301
2608
0119
0125
0126
0201
0521
0205
0214
0426
Input Code
0102
0101
0106
1917
0113
0118
0825
Language
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fijian
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
1101
0405
0512
1112
0714
0721
0801
0923
0809
0515
0520
0615
0610
0609
0618
0625
0712
Input Code
0315
0818
0319
0401
1412
0514
Language
Hungarian
Icelandic
Indonesian
Interlingue
International
Inupiaq
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laotian
Latvian
Lingala
Lithuanian
Macedonian
1125
1814
1115
1121
1215
1222
1214
1220
1311
0701
0920
1001
1023
1114
1119
1111
1823
Input Code
0821
0919
0914
0905
0901
0911
319
List of Language Codes
320
Malagasy
Malay
Language
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauruan
Nepali
Norwegian
Oriya
Oromo
Pashto
Persian
Polish
Portuguese
Provencal
Punjabi
Quechua
Rhaeto-Romance
Romanian
Russian
0601
1612
1620
1503
1601
1721
1813
1815
1821
1315
1314
1401
1405
1415
1518
1513
1619
Input Code
1307
1319
1312
1320
1309
1318
Slovene
Somali
Somoan
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajir
Tamil
Tartar
Language
Sand
Sanskrit
Scottish Gaelic
Serbian
Serbo-Croatian
Seth-Thu
Setswana
Shona
Sindhi
Sinhalese
SiSwati
Slovak
1913
0519
1921
1923
1922
2012
2007
2001
2020
2014
1914
1904
1909
1919
1911
1912
1915
Input Code
1907
1901
0704
1918
1908
1920
Language
Telugu
Thai
Tibetan
Tigris
Tonga
Turki
Turkish
Twi
Twonga
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Worf
Xhosa
Yiddish
Yoruba
Zulu
0325
2315
2408
1009
2515
2621
2018
2023
2019
2111
2118
2126
2209
2215
Input Code
2005
2008
0215
2009
2015
2011
Index
Symbols
(Display Mode) Button ....................... 70
.......................................5, 22
Numerics
3D Angle Adjustment .................................. 73
A
Address
Editing Address Book .................................. 39
Editing Avoid Area ...................................... 56
Setting Destination...................................... 86
Address Book
Editing Address Book .................................. 37
Setting Destination...................................... 92
Address Book PIN ......................................... 43
Radio ................................................. 287
ATM/Bank (Place Category) ........................ 94
Audio
Remote Control......................................... 140
Settings...................................................... 141
Touchscreen .................................................. 6
Voice Commands List................................ 310
Audio Menu
Bluetooth ® Audio..................................... 197
Disc ............................................................ 156
FM/AM Radio ............................................ 145
HDD ........................................................... 163
Internet Radio............................................ 187
iPod®......................................................... 175
SiriusXM® Radio ....................................... 151
USB Flash drive ..........................................191
Audio System
Auxiliary Input Jack ....................................136
Security Code.............................................137
Theft Protection .........................................137
USB Port.....................................................135
Auxiliary Input Jack ....................................136
Avoid Streets ...............................................128
Avoided Area ................................................55
B
Black Level .....................................................25
Bluetooth ® Audio
Playing .......................................................197
Voice Commands List ................................312
Bluetooth ® HandsFreeLink®
Editing User Name/PIN.......................219, 220
Importing Phonebook Data .......................210
Making a Call.............................................224
Pairing a Phone..........................................204
Phone Settings...........................................219
Receiving a Call..........................................229
Setting Up Speed Dialing...........................211
Brightness ......................................................25
C
Calendar .......................................................269
Call
Calculate Route Screen......................106, 132
Call History ...................................................227
Cancel Route ...............................................121
Category
Editing Address Book ..................................39
Place Category List.................................... 318
Setting Destination ..................................... 94
Category History
Deleting....................................................... 45
Change State ................................................ 87
City ................................................................. 88
City Vicinity
Setting Destination ..................................... 95
Clock Adjustment ......................................... 27
Community (Place Category) ...................... 94
Continue Trip .............................................. 132
Contrast ......................................................... 25
Coordinate .................................................. 105
Correct Vehicle Position .............................. 80
Current Location .......................................... 74
Current Position
Editing Address Book.................................. 39
Setting Destination ................................... 103
D
Day Mode
Day .............................................................. 69
Night ........................................................... 69
Switching Display Mode ............................. 70
Delete Tracking ............................................ 79
Destination List
Adding Waypoint...................................... 122
Editing ....................................................... 126
Detour .......................................................... 128
Dial ............................................................... 226
Directions .................................................... 116
Disc
Playing....................................................... 156
Voice Commands List ............................... 311
321
Index
322
Display Tracking ............................................79
Driving........................................................111
Setting..........................................................79
Download POI
Editing Category ..........................................47
Importing Category .....................................46
Setting Destination ....................................100
G
Go Home ....................................................... 11
Go Home PIN ................................................ 43
Gracenote Info. Update ............................ 173
Guidance (Navi Settings) ............................. 57
Guidance Mode ............................................ 58
Guidance Point ............................................. 63
E
Edit Go Home ................................................42
Edit Home Entry ..........................................106
Edit POI Search Radius Along Route ..........54
Edit/Delete Entry .........................................106
Emergency (Place Category) ........................94
ENTER Button ..................................................7
Error Messages ............................................282
Radio ...............................................287
CD Player ...................................................283
Hard Disc Drive (HDD) Audio.....................284
iPod®/USB Flash Drive ...............................285
Navigation System .....................................282
Pandora®...................................................286
Estimated Time ..............................................64
Exit Info ........................................................117
H
HDD
Playing....................................................... 163
Voice Commands List ............................... 310
Home Address ........................................ 11, 42
Honda Automobile Customer Service ..... 294
House Number .............................................. 91
I
Import Phonebook Data ........................... 210
Interface Dial .................................................. 7
Intersection ................................................. 102
iPod®
Connecting, Disconnecting............... 175, 191
Playing....................................................... 175
Voice Commands List ............................... 311
F
FM/AM Radio
Playing........................................................145
Voice Commands List ................................310
Folder List
Disc ............................................................160
USB Flash Drive ..........................................196
Fuel/Auto (Place Category) ..........................94
L
Language Settings ....................................... 33
Lodging (Place Category) ............................ 94
M
Map (Navi Settings) ...................................... 65
Map Data Update
Checking Version ...................................... 270
Obtaining Update Data ............................. 295
Map Input
Editing Avoid Area ...................................... 56
Setting Destination.................................... 103
Map Legend .............................................. 9, 75
Map Menu ................................................... 114
Map Screen .................................................. 108
Changing View............................................ 72
Icon.......................................................... 9, 77
Scale ............................................................ 76
Map/Guidance ............................................. 115
MENU Button
Changing Route ........................................ 120
Entering a Destination................................. 84
Multi-View Rear Camera ........................... 272
Music Search
HDD ........................................................... 151
iPod® ........................................................ 181
Phonetic Modification ............................... 184
Song By Voice............................................ 183
N
NAV Button ............................................. 10, 58
Navigation Menu (Destination) ................. 84
Navigation Menu (Route Option) ............ 120
Next Maneuver Pop up ................................ 62
Night Mode
Switching Display Mode.............................. 70
Non-map screens .......................................... 61
Index
P
Pandora® ..................................................... 188
Personal Info ................................................. 36
Phone Setup ................................................ 219
Phonebook
Importing................................................... 210
Making a Call ............................................ 225
PIN Numbers .................................................. 43
Place Category
Editing Address Book .................................. 39
Place Category List .................................... 318
Setting Destination...................................... 94
Place Name
Editing Address Book .................................. 39
Setting Destination...................................... 96
Place Phone Number
Editing Address Book .................................. 39
Setting Destination...................................... 99
Previous Destinations
Deleting ....................................................... 44
Editing Address Book .................................. 39
Setting Destination...................................... 93
R
Radio
FM/AM....................................................... 145
SiriusXM® ................................................. 151
Random
Disc ....................................................158, 159
HDD ...................................................166, 167
USB Flash Drive..................................194, 195
Rear Entertainment System ...................... 244
Auxiliary Console Panel ............................. 244
Front Control Panel ...................................259
HDMI Input Jack ........................................245
Rear Control Panel.....................................248
Wireless Headphones ................................263
Rearview Camera ........................................272
Recreation (Place Category) ........................94
Repeat
Disc ....................................................158, 159
HDD ...................................................166, 167
iPod®.................................................179, 180
USB Flash Drive ..................................194, 195
Restaurant (Place Category) ........................94
Route Option ...............................................120
Route Preference ..........................................50
Routing ...........................................................49
SiriusXM® Radio
Playing....................................................... 151
Voice Commands List ............................... 310
Song By Voice
TM
Searching Music........................................ 183
Setting....................................................... 182
Voice Commands List ............................... 310
Sort by Distance to Travel ........................... 95
........................................ 143, 144
Speed Dial
Making a Call............................................ 228
Registering ................................................ 212
Straight Line Guide ...................................... 73
Street ............................................................. 89
Street Name Guidance ................................ 60
System/Device Information ....................... 270
S
Scan
Disc ....................................................158, 159
FM/AM Radio.....................................147, 149
HDD ...................................................166, 167
USB Flash Drive ..................................194, 195
Scenic Road Information ...........................270
Scenic Route ................................................101
Schedule
Calendar ....................................................269
Search Along ...............................................123
Search Around .............................................123
Search by Name ............................................95
Search Nearby .............................................129
Security PIN Code ........................................290
SETTINGS Button .............................................4
Shopping (Place Category) ..........................94
Show Icon on Map ........................................67
T
Touchscreen
Basic Operation ............................................. 6
Screen Settings ........................................... 82
Shortcuts ................................................... 138
Sound Settings .......................................... 143
Traffic Incidents .......................................... 118
Traffic List .................................................... 118
Traffic Rerouting ........................................ 118
Auto Reroute ............................................ 118
Navi Settings ............................................... 53
Travel (Place Category) ............................... 94
Trip Computer ............................................ 268
323
324
Index
U
Unit Settings ..................................................32
Unverified Routing .......................................51
Update System Software
Finding Update Information ......................295
Obtaining Update Data .............................295
USB Flash Drive
Connecting, Disconnecting ...............175, 191
Playing........................................................191
Voice Commands List ................................311
USB Port .......................................................135
V
Vehicle
Correct Vehicle Position...............................80
Off-road Tracking ........................................79
View (Navi Settings) .....................................72
View Area Map .............................................55
View Routes .................................................107
Voice
Map Menu .................................................112
Voice Commands
Basic Operation..............................................8
Help..............................................................15
Voice Commands List ................................306
Voice Control System ..................................22
Voice Control Operation
Basic Operation..............................................5
Voice Portal....................................................5
W
Wallpaper
Deleting, Importing, Setting ....................... 29
Waypoint
Adding ...................................................... 122
Deleting, Ordering .................................... 126
Z
Zip Code ........................................................ 87
advertisement
Key Features
- Voice Control
- Navigation System
- Traffic Rerouting
- Multi-view Rear Camera
- Destination Search
- Route Guidance
- Home Address Storage
- Contact Storage
- POI Avoidance