Honda Fit 2013 Owner Manual

FIT_KA-31TK6830.book 0 ページ２０１１年７月４日月曜日午後２時４５分

QRG

2013 Fit Navigation Online Reference Manual

Index

Home

The information and specifications included in this publication were in effect at the time of approval for printing. Honda Motor Co., Ltd., reserves the right, however, to discontinue or change specifications or design at any time without notice and without incurring any obligation.

Accessories Precautions

The GPS antenna is located in the dashboard. Metallic front or side window tinting can seriously degrade or obstruct GPS reception.

Signal noise from devices such as radar detectors, vehicle tracking devices, remote starters, and additional amplifiers can disrupt the navigation system. If you install any such item, install it away from the navigation display and antenna.

Important Safety Information

WARNING

Using the navigation system while driving can take your attention away from the road, causing a crash in which you could be seriously injured or killed.

Only operate system controls when the conditions permit you to safely do so.

Avoid focusing on the screen or manually operating the system controls while driving.

Certain on-screen controls are disabled when driving, but most of the audible instructions and voice commands continue to function. Pull to the side of the road if you need to devote more attention and time to look at the screen or access additional menus.

Route guidance may conflict with street closures, road construction, detours, and out-of-date map data.

The system itself may also have limitations. Verify route information by carefully observing roads, signs, and signals. Always use your own judgment and obey traffic laws.

2 System Limitations P. 174

NOTICE

This vehicle’s navigation display, if so equipped, includes mercury-containing components. Upon removal, please reuse, recycle, or dispose of as hazardous waste.

Clean the screen with a soft, damp cloth. You may use a mild cleaner intended for use on navigation screens.

FIT_KA-31TK6830_TOC.fm 1 ページ２０１１年７月４日月曜日午後２時４９分

QRG

2013 Fit Navigation Online Reference Manual

2 System Setup P. 17

Start-up 18

Routing & Guidance 40

Voice Control System 20

Clock Adjustment 47

Interface Settings

22

Vehicle

50

Personal Information

30

Data Reset

53

2 Navigation P. 55

Entering a Destination 56

Changing Your Route 99

Calculating the Route

77

Driving to Your Destination 80

Map Menu

85

Changing Your Destination 106

Resuming Your Trip

110

2 Audio P. 111

Audio System

112

Playing FM/AM Radio

114

Playing a USB Flash Drive

127

Playing Bluetooth ® Audio

131

Playing a Disc 119

Adjusting the Sound 134

Playing an iPod®

123

Audio Remote Controls

135

2 Bluetooth ® HandsFreeLink® P. 137

Bluetooth ®

HandsFreeLink®

138

Pairing a Phone

140

Phone Setup

149

Making a Call

150

2 Other Features P. 157

Information Functions 158

2 Troubleshooting P. 159

Troubleshooting 160

Error Messages 166

2 Reference Information P. 171

System Initialization 172

System Limitations

174

2 Voice Commands P. 183

Voice Commands

184

Setting Up Speed Dialing

145

Editing Phone

Information

148

Receiving a Call

153

HFL Menus 154

Customer Assistance

176

Legal Information

179

Index

Home

QRG

Navigation Key

Quick Reference Guide

TOC Chapter Table of Contents

Index Index

Voice

Commands

Home Book Table of Contents

Contents

Quick Reference Guide

P.2

System Setup

P.17

Navigation

P.55

Audio

P.111

Bluetooth ® HandsFreeLink®

P.137

Other Features

P.157

Troubleshooting

P.159

Reference Information

P.171

Voice Commands

P.183

Index

P.194


QRG

Overview—Functions at a Glance

Navigation

You can select any place/landmark as a destination by using voice control or the touch screen. The navigation system gives you turn-by-turn driving directions to your destination.

Store home addresses

(P36)

Register

2

home addresses.

Store contacts

(P31)

Store up to

200

contacts in

2

address books.

Enter destination

(P56)

Select your destination using

11

methods.

Select route

(P78)

Set route preferences and select one of

3

routes.

Track route

(P80)

Follow your route in real-time with voice guidance.

Avoid certain areas

(P100)

Set streets and areas to detour around.

Add waypoints

(P101)

Add up to

4

“pit stops” along your route.

Index

Home

2


Audio

The advanced audio system provides clear, well-defined sound and makes the most of your music.

Enjoy listening to a variety of audio sources, such as:

AM/FM Radio

(P114)

Compact Disc

(P119)

iPod®

(P123)

USB Flash Drive

(P127)

Bluetooth ® Audio

(P131)

Voice Control

(P20)

Use voice commands to control the system while driving. You can operate all key functions of the navigation and audio systems.


(P138)

Pair a compatible cell phone to receive incoming and make outgoing calls. You can operate the phone features without ever taking your hands off the wheel.

QRG

Index

Home

3


QRG

Index

Home

4

System Controls

1 E

(Eject) Button

2

FM/AM Button

(P114)

3

CD/AUX Button

(P119)

4

AUDIO Button

(P6)

5

SEEK/SKIP Button

(P114)

6

Disc Slot

(P6)

9

PHONE Button

(P138)

la

MAP/GUIDE Button

(P90)

lb

DEST Button

(P56)

lc

INFO Button

(P10)

ld

ZOOM IN/OUT Button

(P95)

le

CANCEL Button

lf

Joystick/ENT Button

Press ENTER

Selects map location or list item.

7 a

(Display Mode)

Button

(P27)

8

VOL

9

Knob

(P6)

Navigation Screen

(Touch Screen)

Audio Navigation

Voice Control/

Bluetooth ® HandsFreeLink®

Move up Move Left Move down Move right

Scrolls map or list.

FIT_KA-31TK6830.book 5 ページ２０１１年７月４日月曜日午後２時４５分 lg

Microphone

(P20)

Voice Control Operation

a Press and release the d

(Talk) button.

A helpful prompt asks what you would like to do. Press and release the d

(Talk) button again to bypass this prompt.

QRG d

(Talk) Button lh

MODE Button

(P135)

li

VOL (Volume) Button

(P136)

lj

CH (Channel) Button

(P136)

ma h

(Pick-Up) Button

(P153)

mb j

(Hang-Up) Button

(P153)

mc d

(Talk) Button

(P5)

md K

(Back) Button

(P5)

 The icon is displayed and the system beeps when ready for a command. Press the

K

(Back) button to cancel.

 Available voice commands are highlighted on the screen.

b Say a voice command.

Voice Command

(P183)

 The audio system is muted during voice control mode.

 Say to see all supported commands. A voice help tutorial is also available.

Voice Help

(P13)

 Carefully read the usage note for the voice control.

Voice Control System

(P20)

Index

Home

5


QRG

Audio System

You can play music from a wide array of media sources. You can also control the audio system using voice commands.

Basic Operation

a Press the VOL

9

(Volume/Power) button to turn the audio system on or off.

b Press the AUDIO button and select SOURCE on the screen.

c Select the audio source.

Audio source

Audio Control Display

Press the AUDIO button to display the audio system on the navigation screen.

Audio source

Displays selected source.

Track list

Play mode

Open icon

Index

Home

6

Or, press the FM/AM button or CD/AUX button repeatedly to select the audio source.

d Rotate the VOL

9

(Volume/Power) knob to adjust the volume.

Displays or hides the music information.

Folder/Track tab

Displays the list.

Music information

Close icon

Audio control

Sound preferences

Repeat and random play


Map Screen Legend

Map scale (P95)

Map orientation

(P97)

North up

Heading up

GPS signal strength

Best reception

Good reception

No icon: Poor/No reception

QRG

Current map scale

Feature areas

Park

Hospital

Shopping Mall

Golf Course

Airport

Water Area

Cemetery

University

Current vehicle position

(P98)

Current street name/audio control

(Select to switch the display.)

Map menu (P85)

Streets

Freeways

State routes

Verified streets

Unverified streets

One-way streets

Landmark icons

(P92)

Acura dealer

Honda dealer

ATM

School

Parking lot

Parking garage

Grocery store

Hotel/Lodging

Gas station

Hospital

Post office

Restaurant

Freeway exit information

Index

Home

7


QRG

During Route Guidance

During route guidance, route information is displayed on the map/guidance screen.

Press the MAP/GUIDE button to display the guidance screen.

Map Screen

Calculated route

(P80)

Destination direction indicator

Direction “as the crow flies.”

Distance to destination

Distance of the actual route.

Guidance indicator

Distance to the next guidance point.

Calculated route

(unverified roads)

(P82)

Estimated time to destination

Destination icon

(P79)

Waypoint

(P101)

Guidance Screen

Route guidance list scroll bar

Select

R

or

U

to scroll the list of guidance points.

Street name of guidance point

Distance to guidance point

Route progress bar

Index

Home

8

No entry icon

Day or Night Mode

Press the a

(Display mode) button to manually switch between day and night mode.

Day mode Night mode


How to Enter Information

You can enter information (e.g., city names, street names, personal names, and business names comprising letters, numbers, and symbols) when prompted on input screens by two different methods.

Using Voice Control

When you see d

in this manual, voice commands are available for that feature.

 Say the letter, number, or symbol (e.g., say d

“A” ).

 Use spelling assist (e.g., say d

“Alpha” to enter the letter “A” or d

“Hyphen” to enter a hyphen).

 The system beeps if you say an unavailable (grayed out) letter or number.

 If a voice command is not recognized, a list is displayed with possible options.

Using the Touch Screen

Touch a character or icon on the screen to select it.

 Select Delete to remove the last entered character.

 Select Shift to display accented and upper/lower case characters.

 Select Space to enter a space character.

 Select More to display symbols.

Number of Hits

QRG

On input search screens, the number of hits in the map database is displayed. Select List to display a list of possible entries.

On list screens:

 Say the number of the list item (e.g., say d

“Five” to select item

5).

 Say d

“Up” or d

“Previous” to scroll up one page.

 Say d

“Down” or d

“Next” to scroll down one page.

NOTE

You can also use the joystick to enter information.

2 System Controls P. 4

On list screens:

Scrolling through lists or tabs is limited while the vehicle is moving.

Certain touch screen functions are limited or inoperable while the vehicle is moving. For these functions, use available voice commands or pull over to proceed.

Index

Home

9


QRG

Navigation—Home Addresses and Going Home

The “Home” feature automatically routes you to your home address from any location simply by selecting Go Home 1 or 2 , or saying d

“Go

Home.” You can store two home addresses as Home Address 1 and Home Address 2

. (P36)

Storing Your Home Address Going Home

f Enter a name and select OK .

a Press the INFO button.

a Press the DEST button.

b Select Setup .

c Select Personal Information .

d Select Home Address 1 .

e Select Edit Name .

b Select Go Home 1 .

g Select Edit Address .

h Select Address .

i Enter an address.

j Select Edit Phone No .

k Enter a phone number and select OK .

l Select OK .

Alternatively, you can say d

“Go

Home” from any screen. Your home address is displayed on the Calculate

Route screen.

c Select Set as Dest.

 The following voice commands are available: say d

“Go Home , ” d

“Go

Home 1 , ” d

“Go Home 2 .

”

 If you have two home addresses stored, saying d

“Go Home” will select Home

Address 1 .

Index

Home

10


Navigation—Entering a Destination

Enter your destination using one of several methods, then follow route guidance on the map or guidance screen to your destination. You can also perform these steps using d

voice control.


e Select your destination street from the list.

h Select Set as Dest.

Route guidance to the destination begins.

b Select Address .

QRG f Enter the street number. Select OK when finished.

 View Routes : Choose one of three routes.

c Select Street .

d Enter the name of your destination street and select List if necessary.

g If there is more than one city with the specified street, a list of cities is displayed. Select the desired city from the list.

 Route Pref.

: Choose MAX or MIN for the three settings.

Index

Home

11


QRG

Navigation—Changing Route or Destination

You can alter your route by adding waypoints to visit, adding streets to avoid, or changing your destination during route guidance.

Adding a Waypoint

(“Pit Stop”)

You can add up to four waypoints along

your route. (P101)


b Select Waypoint .

c Select search method.

When you select Places Around the

Waypoint , select the desired waypoint.

d Select the icon category and location to add to the destination list when prompted.

Changing Your

Destination

There are four methods you can use to specify a new destination during route guidance.

 Say d

“Find Nearest…”

(P106)

Searches for the nearest place/landmark on the map screen (e.g., d

“Find nearest gas station” ).

 Say d

“Go Home”

(P10)

Routes to your home address.



Selecting an icon on the map (P107)

Scroll the map to position the cursor over a place/landmark icon or a new area on the map. Press the Enter button twice.

 Entering a new destination

(P108)

Press the DEST button. Select DEST

Menu1/2 and enter a new destination.

Canceling Your Route


b Select Cancel Route .

From the map screen:

a Select MAP MENU .

b Select Cancel Route .

Index

Home

12


Voice Help

This navigation system comes with voice help information, which tells you how to use the voice command functions.

Go to Voice Info for tips when using the voice command functions.

Getting Started Tutorial

a Press the INFO button.

d Select Using the talk button .

Command Help

For “Command Help” menu items, all voice commands that are available for that system are listed.

b Select Voice Info .

QRG c Select Getting started .

e Select Read to hear the tutorial read aloud.

Select Read to hear the commands in the list read aloud.

Voice Commands

(P183)

Select Stop to stop the tutorial.

You can also view the available command list for each system. See

Command Help on this page.

Index

Home

13


QRG

Troubleshooting

Why does the vehicle position icon on the map “lag” a short distance behind my actual position, especially at intersections?

This is normal. The navigation system is unaware of the width of intersections. Large differences in vehicle position can indicate a temporary loss of the GPS signal.

Why does the “time to destination” display sometimes increase even though I am getting closer to my destination?

The “time to destination” is based on the posted road speed signs and your actual road speed to give you a better estimate of arrival time.

Why does my clock frequently change the time forward and backward by one hour?

The clock setting is automatically updated based on your

GPS location. If you normally drive between two time zones, the clock may keep adjusting the time. You can turn this feature off.

2 Clock Adjustment P. 47

Index

Home

14

For more Information

(P159)

How do I specify a destination when an entered city or street could not be found?

Try entering the street first. Some cities are lumped in with a major metro area. In rural “unverified” areas or new subdivisions, streets may be missing or only partially numbered.

How do I turn on the navigation system voice guidance?

1.

Press the INFO button. Select Setup . Check that

Volume is not set to Off .

2.

Select Other , then Basic Settings . Set Voice

Recognition Tutor to On if you want the system to provide confirmations and system prompts.

My battery was disconnected or went dead, and the navigation system is asking for a code. Where do I find it?

Your vehicle comes with a label in the Owner’s Manual kit that includes the system’s security code and serial number.

You should keep this label in a safe place outside your vehicle. If you cannot find it, contact your dealer.


How to Use This Manual

This section explains different methods on how you can easily find information in this manual.

QRG

Searching the Table of Contents

(P1)

Two types of Tables of Contents help you find your desired information.

More Detaile d

Contents

Table of Contents

First, find the general chapter related to what you are looking for (e.g., entering a destination from the Address Book).

Then, go to that chapter to view a more specific table of contents.

Chapter Contents

This more detailed table of contents shows you exactly what information is listed by section and title.

Searching the Index

(P194)

Menu items displayed on the navigation screen (e.g., Address Book) can be found individually in the Index.

Navigation Screen

Index

The Index consists of main terms and subentries. The sub-entries help you get to the desired page depending on what you are looking for.

Go to the

Next Pa g e

Index

Home

15

QRG


After following the menu tree, step-by-step instructions explain how to achieve the desired result.

Index

Home

16

Menu Tree

The menu tree helps guide you through the system’s menu options.

To get to your desired function, follow the menu tree in order of the steps shown.

NOTE:

All menu options can also be activated with voice commands.

DEST

b

utton

Press the hard button on the system control panel.

Press the DEST button.

Sample pages and images in this section may differ from the actual ones.

Select the menu option.

Select Address Book .


2013 Fit Navigation

System Setup

QRG

This section describes the start-up procedure and the navigation and setup functions.

Start-up ................................................... 18

Voice Control System ............................. 20

Command Input ....................................

20

Voice Recognition ..................................

21

Interface Settings ................................... 22

Display and Volume Settings ..................

22

Guidance Prompts..................................

23

Basic Settings .........................................

24

Color .....................................................

25

Language...............................................

29

Personal Information .............................. 30

Address Book.........................................

31

Home Addresses ....................................

36

PIN Numbers ..........................................

37

User Name ..............................................

38

Previous Destinations ..............................

39

Routing & Guidance ................................40

Rerouting................................................

41

Unverified Area Routing ..........................

42

Edit Avoid Area .......................................

44

Edit Waypoint Search Area......................

46

Clock Adjustment ....................................47

Adjust Time ............................................

48

Resetting the Clock Settings....................

48

Setting the Clock Type ............................

49

Vehicle ......................................................50

Off-road Tracking ...................................

51

Correct Vehicle Position ..........................

52

Data Reset ............................................... 53

Reset Factory Default Settings ................

53

Clear All Speed Dial................................

54

Index

Home

17


Start-up

QRG

TOC

The navigation system starts automatically when you turn the ignition to

ACCESSORY (I) or ON (II). At start-up, the following Confirmation screen is displayed.

1.

Select Change Language .

 If you do not need to change the system language, proceed to step 3.

2.

Select the system language.


1 Start-up

If the navigation system loses power at any time, you may need to press and hold the VOL

9

(Volume/Power) button for more than two seconds, or you may be prompted for the 5-digit security code.

2 System Initialization P. 172

You can change the system language at any time.

2 Language P. 29

“OK” on the Confirmation screen cannot be selected by using a voice command. If you do not select OK within 30 seconds, the screen turns dark and you cannot use voice commands. Press any navigation or voice control button to continue.


2 Setting the Clock Type P. 49

3.

Select OK .



Your current position is displayed on the map screen.

Index

Home

18


■

Limitations for Manual Operation

Certain manual functions are disabled or inoperable while the vehicle is in motion. You cannot select a grayedout option until the vehicle is stopped.

Voice commands are still operable while the vehicle is in motion.

Disabled Option

 Start-up 


QRG

TOC

Index

Home

19


Voice Control System

QRG

TOC

Your vehicle has a voice control system that allows hands-free operation of most of the navigation system functions. You can also control the audio system, and make and receive phone calls using Bluetooth ® HandsFreeLink®.

The voice control system uses the d (Talk) and K (Back) buttons on the steering wheel and a microphone near the map lights on the ceiling.

A “Voice Info” feature provides a tutorial that explains how to use the voice control system.

2 Voice Help P. 13

Command Input

Index

Home

20

If the system does not understand a command or you wait too long to give a command, it responds with “Pardon? No command was heard. Please press the talk button and say a command.”

When you give a command, the system generally either repeats the command as a confirmation or asks you for further information. If you do not wish to hear this feedback, you can turn it off. However, listening to the feedback will help familiarize you with the way the system expects commands to be phrased.

2 Basic Settings P. 24

If the system cannot perform a command or the command is not appropriate for the screen you are on, the system beeps.

If the system responds with prompts such as “Please use the touch screen to…” or

“Please use the joystick to…,” the system is asking for input that cannot be performed using the voice control system.

On character input screens, a list of possible characters is displayed if the system does not recognize your command.

You can find out which voice commands are available for a particular screen using the d

Help command. The system will display and read the list of available commands to you.


1 d

(Talk) Button

When you press the d

(Talk) button, a helpful prompt asks what you would like to do. Press and release the d

(Talk) button again to bypass this prompt and give a command.

1 Command Input

The audio system is muted while using the voice control system.


Voice Recognition

To achieve optimum voice recognition when using either the navigation voice control system or Bluetooth ® HandsFreeLink®:

• Make sure the correct screen is displayed for the voice command that you are using.

2 Voice Commands P. 184

• Close the windows and moonroof.

• Adjust the dashboard and side vents so air does not blow onto the microphone on the ceiling.

• Speak clearly in a clear, natural speaking voice without pausing between words.

• Reduce any background noise if possible. The system may misinterpret your command if more than one person is speaking at the same time.

• Refer to the Voice Info tutorial.

2 Voice Help P. 13

 Voice Control System  Voice Recognition


QRG

TOC

Index

Home

21


QRG

TOC

Interface Settings

Display and Volume Settings

H

INFO button



Setup

Use the Main Setup screen to adjust the display and volume.

Select b

or n

to adjust the desired item.


1 Display and Volume Settings

You can set separate daytime and nighttime settings for Brightness , Contrast , and Black

Level . Adjust each setting when the display is in either daytime or nighttime mode.

You can set the display and volume settings using voice commands.

2 Main Setup Screen Commands P. 189

Volume

If you set Volume to Off , you will not hear route guidance or voice command confirmations. If you then select VOICE on the map menu, you will hear route guidance at the default volume.

The following items are available:

• Brightness: Adjusts the screen’s brightness.

• Contrast: Adjusts the screen’s contrast.

• Black Level: Adjusts the screen’s black level.

• Volume: Adjusts the navigation system volume level.

Index

Home

22


Guidance Prompts

H

INFO button



Setup

Set the number of guidance prompts before you get to the guidance point.

Select an option.

 Interface Settings  Guidance Prompts


1 Guidance Prompts

To replay voice guidance, select VOICE on the map menu.

2 Listening to Voice Guidance P. 84

You can turn voice guidance off if you prefer.

2 Display and Volume Settings P. 22

QRG

TOC

The following options are available:

Items

MIN

NORMAL

(factory default)

MAX

Distance from Guidance Point

About 1/2 mile About 1/4 mile Just before

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Index

Home

23


QRG

TOC

 Interface Settings  Basic Settings

Basic Settings

H

INFO button



Setup



Other



Basic Settings

Set the map units to either miles or kilometers, and control the voice feedback from the navigation system.

Select an item.

Index

Home

24


• Keyboard Layout : Sets the type of keyboard screen to either Alphabet (factory default) or QWERTY.

• Units : Sets the map units to either miles (factory default) or kilometers.

• Voice Recognition Tutor : Turns the voice feedback feature on or off.

On (factory default): Provides voice control system confirmation or prompts.

Off : Disables the feature.

• Display Voice Command Tips : Alerts you when manual control of the system is disabled to prevent distraction while driving. Only voice commands are available.

On (factory default): Displays a message.

Off : Disables the message, but some options may be grayed out on the screen.



• Verbal Reminder : Turns the verbal reminders on or off.

On (factory default): Provides warning voice messages when:

– Driving with the parking brake on

– Driving without wearing the driver and/or passenger seat belt


Color

H

INFO button  Setup  Other  Color

Choose the color of the navigation map and system menus.

Select an item.


• Map : Sets the color of the map screen.

2 Map Color P. 26

• Menu : Sets the color of the menu screens.

2 Menu Color P. 26

 Interface Settings  Color


QRG

TOC

Index

Home

25


QRG


TOC

■

Map Color

H

INFO button  Setup  Other  Color  Map

Set separate map colors for Day and Night modes.

Select a color for the map screen.


1 Map Color

For Day mode

Set to White (factory default is Beige ) to obtain the best daytime display contrast.

For Night mode

Set to Black (factory default) to obtain the best nighttime display contrast.

■

Menu Color

H

INFO button



Setup



Other



Color



Menu

Set separate menu colors for Day and Night modes.

Select a color for the menu screens.

1 Menu Color

For Day mode

Set to Black (factory default is Blue ) to obtain the best daytime display contrast.

For Night mode

Set to Black (factory default is Blue ) to obtain the best nighttime display contrast.

Index

Home

26


■

Switching Display Mode Manually

Set the screen brightness separately for Day and Night modes. Press the a

(Display mode) button to cycle through the display modes (Day to Night to Off).

1.

Press the a button.

 The Brightness bar is displayed for a few seconds.

2.

Press the a

button again.

 Repeat the procedure to switch the display modes.



Select b

or n

to adjust the brightness.



QRG

1 Switching Display Mode Manually

A visual guide helps you see the difference between Day and Night modes.

2 Day or Night Mode P. 8

Recommended Settings

• Select mid-range for the dash illumination.

• Select White for the map Day display and

Black for the map Night display.

TOC

Continued

Index

Home

27


QRG


TOC

Index

Home

28

Illumination control a

button

Priority

Sunlight sensor

(see your

Owner’s Manual for location)

Dash illumination adjustment buttons (see your

Owner’s Manual for location)

Headlights

(Auto/On/Off)

Screen color choice

Operation

1

2

3

Selects Day, Night, or Off display mode. This button has the highest priority and overrides all other display control adjustments listed below.

If the sunlight sensor detects daylight and the headlights are turned on, the system automatically overrides the

Night display and displays the Day display mode.

Remember : If desired, use the a

button to override this automatic choice.

When the headlights are turned on, and you wish to have the Day display mode, adjust the illumination to full brightness (beeps).

Remember : Adjust the dash brightness back to mid-range to allow auto switching by sensing the headlights are on or off.

4 When turned on, the display changes to Night display mode. The previous three controls listed above can

“cancel” this function.

Remember : Use the a

button, or adjust the dash illumination to full brightness, to set the display to your desired choice.

N/A The user can select the color of the screen that will be displayed for the Day and Night display modes described above.

Remember : For best contrast, ensure that the map color is white for Day and black for Night.



Language

H

INFO button



Setup



Other



Language

Set the system language used on all screens. You can choose from three languages:

English , Français (French), Español (Spanish).

Select the system language.

 Interface Settings  Language


QRG

1 Language

Voice confirmation of cities and streets only occurs when English is the system language.

When Français or Español is selected, some messages continue to be displayed in English.

TOC

Index

Home

29



QRG

TOC

H

INFO button  Setup  Personal Information

Use the personal information menu to select and set your address books, home addresses, and PINs. You can also delete unwanted destinations from the list of previously routed destinations.

Select an item.


1 Personal Information

Personal information cannot be backed up or moved to another navigation system.

Index

Home

30


• Address Book : Stores new addresses or edits your address book.

2 Address Book P. 31

• Home Address 1 : Sets or edits your home address.

2 Home Addresses P. 36

• Home Address 2 : Sets or edits another home address.


• PIN Number : Sets or changes your PIN.

2 PIN Numbers P. 37

• User Name : Sets or changes your user name.

2 User Name P. 38

• Previous Destinations : Deletes the destination history.

2 Previous Destinations P. 39


Address Book

H

INFO button



Setup



Personal Information



Address Book

Store up to 200 address entries in two address books (User 1 and User 2). You can add, edit, and delete information in the address books.

Select the user name to edit the user address book.

Displays the address book.

 Select the user name to change the user address book.

 Select the category tab to display only the address in the selected category.

 Personal Information  Address Book


QRG

1 Address Book

The number of addresses is shared by the two address books. For example, if User 1 has 150 addresses, User 2 can only have 50.

If you have PIN-protected your address book, enter your PIN when prompted. Select OK . PINs are optional.

2 PIN Numbers P. 37

Any address book categories you create are also displayed on the Select an Address screen.

2 Selecting an Address Book Category P. 34

TOC

Index

Home

31


QRG


TOC

■

Adding an Address Book Entry

H

INFO button  Setup  Personal Information  Address Book

This section explains how to enter the name and address.

1.

Select New Address .


1 Adding an Address Book Entry

If you do not give the address a name, one is automatically assigned (e.g., Address 001). You can re-enter, edit, or make changes to any entry.

“Address” is the only required field.

2.

Select an item.

Index

Home

32


• Edit Name : Edits the name of the entry.

• Edit Address : Edits the address of the entry.

• Edit Phone No.

: Edits the phone number of the entry.

• Edit Category : Specifies the category of the entry.

• Delete : Deletes the entry.




QRG

3.

Select Edit Name .

4.

Enter a name or title. Select OK .

5.

Select Edit Address .

6.

Select an item for specifying the address.


• Current Position: Select your current location.

• Address: Enter an address on the character input screen when prompted.

2 Address P. 58

• Previous Destinations: Select a previous destination.


• Place Name: Enter the name of a place/landmark.

2 Place Name P. 65

• Place Category: Select a category to search for a place/landmark (e.g., Banking,

Lodging).

2 Place Category P. 67

• Place Phone Number: Enter the phone number of a place/landmark.

2 Place Phone Number P. 72

1 Adding an Address Book Entry

When you use Place Name or Place Category , the name and phone number are automatically entered.

TOC

Index

Home

33



QRG

TOC

■

Editing an Address Book Entry

H


1.

Select the address to edit.

2.

Enter the name, address, phone number, and category fields.

2 Adding an Address Book Entry

P. 32

3.

Select OK .


1 Editing an Address Book Entry

The entered contents are displayed on the Edit address screen.

■

Selecting an Address Book Category

H


1.

Select an address.

2.

Select Edit Category .

3.

Select BUSINESS , PERSONAL , or a category you created.

1 Selecting an Address Book Category

You can have up to 100 categories (including

“UNFILED”). These categories can be shared with

User 1 and User 2. For example, if User 1 creates some categories, User 2 can also use them.

If you delete a category that is used by other addresses, the category type for those addresses changes to “UNFILED.”

Category Icons

The following icons can be selected for a category:

Index

Home

34




QRG

TOC

■ Creating a New Category

1.

Select New Category .

2.

Enter a name and select an icon when prompted. Select OK .



The created category is displayed in the list of categories.

■ Deleting or Editing a Category

1.

Select Edit Category .

2.

Select Edit Category or Delete .

3.

Delete an existing category, or change the name and icon.

■

Deleting an Address Book Entry

H


1.

Select the address to delete.

2.

Select Delete .

3.

Select Yes .

1 Deleting an Address Book Entry

When you transfer the vehicle to a third party, delete all address book entries.

Index

Home

35


QRG

TOC

 Personal Information  Home Addresses

Home Addresses

H

INFO button



Setup






Home Address 1 or Home

Address 2

Set two home addresses that you frequently use.

1.

Edit the name, address, and phone number the same way as an address in the address book.

2 Adding an Address Book Entry

P. 32

2.

Select OK .


1 Home Addresses

If you have PIN-protected your home addresses, enter your PIN when prompted. Select OK . PINs are optional.

2 PIN Numbers P. 37

If your home street is not in the system database, park on the nearest verified street to your home.

When entering the “Address” field, select

Current Position to use your current location as the home address.

You can delete a home address if necessary.

Select Delete . Select Yes .

When you transfer the vehicle to a third party, delete all home addresses.

The home icon is shown on the map screen on 5 mile or less map scales.

Index

Home

36


PIN Numbers

H

INFO button



Setup






PIN Number

Set a 4-digit PIN for protecting personal addresses and your home addresses. Once you set a PIN, you are prompted to enter it whenever you access a personal address or a home address.

1.

Select the PIN to create.

2.

Select the user name (when selecting Address Book PIN ).

3.

Enter a 4-digit PIN.

4.

Re-enter the new PIN when prompted to confirm the number you just entered.

 If you do not enter the same number both times, an

“INCORRECT PIN” message is displayed. Enter your PIN again.

 Personal Information  PIN Numbers


1 PIN Numbers

PIN

Personal Identification Number (PIN) is a password used to access some personal data.

PINs are optional. If you choose to use a PIN, keep a note of the number in a secure location. If you forget your PIN, your dealer will have to reset the navigation system and all of your stored information will be erased. The factory default is no PIN.

Go Home PIN

Go Home PINs are shared with User 1 and User

2. If either User 1 or User 2 sets a Go Home PIN, both of them need to enter the PIN when:

• selecting Go Home for a destination

• selecting Home Address for editing

If you want to stop using a PIN, select Do not use PIN .

QRG

TOC

Index

Home

37


QRG

TOC

 Personal Information  User Name

User Name

H

INFO button



Setup






User Name

Change the user name (“User 1” or “User 2”) to your desired name.

1.

Select the name to change.

2.

Enter a name. Select OK .


Index

Home

38


Previous Destinations

H

INFO button



Setup







The navigation system maintains a list of your previously routed destinations as a shortcut for entering the same destination in the future. You can delete some or all of your previous destinations from the list.

1.

Select the destination to delete.



Repeat the procedure as necessary.

 Items to be deleted are indicated with a trash icon.

 Personal Information  Previous Destinations


QRG

1 Previous Destinations

Up to 50 destinations can be stored.

The list of previous destinations is shared with

User 1 and User 2. For example, if User 1 deletes some previous destinations, they are deleted for

User 2 as well.

To cancel the selection of a previous destination, select the destination again.

Selecting Delete All allows you to delete all destinations.

TOC

2.

Select OK to delete the selected destinations.

Trash icon

Index

Home

39


Routing & Guidance

QRG

TOC

H

INFO button  Setup  Other  Routing & Guidance

Choose various settings that determine the navigation system functionality during route guidance.

Select an item.

Index

Home

40


• Rerouting : Sets the route recalculation to automatic or manual mode.

2 Rerouting P. 41

• Unverified Area Routing : Sets whether you use the route guidance in unverified areas.

2 Unverified Area Routing P. 42

• Edit Avoid Area : Specifies areas to avoid when calculating a route.

2 Edit Avoid Area P. 44

• Edit Waypoint Search Area : Sets the distance from the route to find waypoints.

2 Edit Waypoint Search Area P. 46

• Guidance Mode : Sets whether to display only the map screen or a split map-guidance screen.

2 Guidance Mode P. 90



Rerouting

H

INFO button



Setup



Other



Routing & Guidance

Set whether route recalculation occurs automatically or manually during route guidance.

Select an option.

 Routing & Guidance  Rerouting


QRG

1 Rerouting

If you live in an area with poor mapping, you may wish to set Rerouting to Manual to avoid constant recalculation. You will need to select

Recalc.

manually to make the system recalculate your new route.

TOC


• Automatic (factory default): The system calculates a new route automatically when you deviate from the route. It is strongly recommended that you leave the system set to Automatic.

• Manual : Disables route recalculation. The system beeps and “Off Route” is displayed when you deviate from the route.

Index

Home

41

QRG

TOC


 Routing & Guidance  Unverified Area Routing

Unverified Area Routing

H

INFO button



Setup



Other




Receive turn-by-turn map and voice guidance in unverified areas.

Select On or Off .

Index

Home

42

Differences

Route line

Cautionary messages

Off (factory default)

On or Off?

The driver wishes to manually

Route calculation navigate using the navigation map and choose the streets that lead to the destination.

Route is usually longer, using verified roads whenever possible.

A blue dotted vector line is displayed on the map that continually points to your destination.

Cautionary pop-up screens and voice announcements remind you to obey all traffic restrictions.

On

The driver chooses to let the navigation system suggest possible routing, knowing that the guidance may not be accurate.

Route is shorter, but uses unverified (purple) streets that may not be accurate.

A blue-pink dashed route line highlights suggested unverified streets on the map while traveling to your destination.

Cautionary pop-up screens and voice announcements remind you to exercise additional caution and obey all traffic restrictions.


1 Unverified Area Routing

Unverified roads are found in rural areas, and typically include residential streets away from the center of a town. They may not be accurate, and can contain errors in location, naming, and address range.

Unverified roads are shown only when viewing the map in the 1/20, 1/8, 1/4, 1/2, 1, or 2 mile map scales.

Vector line (dotted)

Blue-pink route line


Differences

Guidance

(map/voice)

My

Destination

(Direction list)

Off (factory default)

There is no turn-by-turn map or voice guidance.

A direction list is typically not available. However, depending on your route, directions are provided to help you reach the first available verified road.

On

Voice guidance commands end with the phrase “if possible” to remind you to verify all traffic restrictions.

A direction list is provided showing unverified street names in blue boxes and turn symbols in pink.

 Routing & Guidance  Unverified Area Routing


QRG

TOC

Index

Home

43


QRG

TOC

 Routing & Guidance  Edit Avoid Area

Edit Avoid Area

H

INFO button

“Edit”



Setup



Other






Edit Avoid Area

Specify up to five areas to avoid (e.g., road construction, closures), if possible, when the system calculates routes to your destination.

1.

Select New Area or an existing area to edit.

2.

Select Edit Name to label the area to avoid.

3.

Enter a name or title. Select OK

.

4.

Select Edit Area to define the area to avoid.


1 Edit Avoid Area

The avoid areas are shared with User 1 and

User 2. For example, if User 1 specifies some avoid areas, User 2 can also use them for setting a route.

The maximum size of an “avoid area” is about 1 square mile.

If your selected area contains a freeway, you are asked “Do you want to avoid freeways?”

Answering “No” allows you to use a route through an avoid area on a freeway without any pop-up messages.

You can select areas to avoid, however you cannot select roads or areas that you want the system to use for routing.

You can enter characters for the name until the input field is full.

The following items are available (after an area is set):

• View Area Map : Displays the selected avoid area on the map.

• Delete : Deletes the selected avoid area.

Index

Home

44


5.

Select a method for specifying the area.

 Routing & Guidance  Edit Avoid Area


QRG

TOC


• Address : Specify the general area by entering an address.

2 Address P. 58

• Map Input : Specify the general area by map input.

2 Map Input P. 75

Cursor 6.

Scroll the map to position the cursor over your desired start point, adjusting the map scale as necessary. Press the ENTER button to mark the start point.

 To redo the area selection, press the CANCEL button.

7.

Scroll the map to “draw” the area.

Press the ENTER button to mark the end point.

Avoid area

8.

Select OK .

 The area you specify is displayed in the list of areas to avoid.

Index

Home

45


QRG

TOC

 Routing & Guidance  Edit Waypoint Search Area

Edit Waypoint Search Area

H

INFO button



Setup



Other






Edit Waypoint

Search Area “Edit”

Select the distance from your highlighted route line (on either side of your route) that the system will search for a waypoint.

2 Adding Waypoints P. 101

You can specify a different search distance for freeways and surface streets.

1.

Select a search distance.

2.

Select OK .


1 Edit Waypoint Search Area

The search distance does not affect the search range used for the Find Nearest voice commands

(e.g., say d

“Find nearest gas station” ).


• On Freeways : 1, 2, 5, or 10 miles can be set. Factory default is 2 miles.

• On Surface Street : 1/2, 1, 2, or 5 miles can be set. Factory default is 1/2 mile.

Index

Home

46


Clock Adjustment

H

INFO button  Setup  Other  Clock Adjustment  Clock Adjustment

Set the automatic adjustment of the system clock for daylight saving and international time zones.

Select an item.


• Auto Daylight : The navigation system autom atically adjusts the clock (“spring ahead” or

“fall back” by one hour) when a daylight saving time change occurs.

On (factory default): Adjusts the clock automatically.


• Auto Time Zone : The navigation system automatically adjusts the clock when driving through different time zones.

On (factory default): Adjusts the clock automatically.


• Clock Format : Sets the time notation to either 12-hour clock ( 12H , factory default) or 24-hour clock ( 24H ).

• Time Adjustment : Adjust the current time manually.

2 Adjust Time P. 48

• Reset : Reset the clock settings to the factory default.

2 Resetting the Clock Settings P. 48


QRG

1 Clock Adjustment

You can check the time and date from any screen using voice commands.

2 Global Commands P. 184

Auto Daylight

This function is not activated in areas that have not adopted daylight saving time, even if you have set Auto Daylight to On .

Auto Time Zone

If you live and work in two different time zones, you may want to turn Auto Time Zone to Off .

When driving near a time zone boundary, the displayed time zone may fluctuate between the two zone times.

TOC

Index

Home

47


QRG

TOC

 Clock Adjustment  Adjust Time

Adjust Time

H

INFO button



Setup



Other



Clock Adjustment




Adjust the current time (hours and minutes).

1.

Select

B

or

N

to adjust the value.

2.

Select OK on the top right of the screen.

Resetting the Clock Settings

H

INFO button



Setup



Other







Reset all clock settings to the factory defaults.

Select OK under Reset .

Index

Home

48



Setting the Clock Type

H

INFO button



Setup



Other






Clock Type

Set the design of the clock screen.

1.

Select Clock Type or Background .

2.

Select an option to change the design.

3.

Select OK .

 Clock Adjustment  Setting the Clock Type


QRG

TOC

Index

Home

49


Vehicle

QRG

TOC

H

INFO button  Setup  Other  Vehicle

Set the off-road tracking feature and correct the vehicle position displayed on the map.

Select an item.


• Off-road Tracking : Set whether to display the tracking dots on the map.

2 Off-road Tracking P. 51

• Current Vehicle Position : Adjust the position of the vehicle on the map.

2 Correct Vehicle Position P. 52

Index

Home

50



Off-road Tracking

H

INFO button



Setup



Other



Vehicle

The navigation system can be set to display white off-road tracking dots

(“breadcrumbs”) on the map screen whenever you drive into an area approximately

1/2 mile away from a mapped road.

Select an option.

 Vehicle  Off-road Tracking


QRG

1 Off-road Tracking

To clear existing breadcrumbs, set Off-road

Tracking to Off , exit the Setup screen, and then set Off-road Tracking to On again.

TOC


• On : The system displays the white tracking dots.

2 Driving Off-road P. 83

• Off (factory default): Disables the feature.

Index

Home

51


QRG

TOC

 Vehicle  Correct Vehicle Position

Correct Vehicle Position

H

INFO button



Setup



Other



Vehicle

Manually adjust the current position of the vehicle as displayed on the map screen if the position appears to be incorrect.

1.

2.

3.

Put the vehicle in Park.

Select ADJUST under

Vehicle Position .

Current

Scroll the map to position the arrowhead at your correct position.

4.

Select or to position the arrowhead in the correct direction the vehicle is facing.

5.

Select OK .


1 Correct Vehicle Position

An apparent position error can occur where buildings, tunnels, and other objects block or reflect the GPS signals, forcing the system to use

“dead reckoning” to determine your location and direction.

Using this function to adjust vehicle position is not recommended. When the system reacquires a GPS signal, it will automatically place the vehicle in the correct location.

If you continually have to adjust the vehicle position, you may have problems with the GPS reception or there may be database errors.


Index

Home

52


Data Reset

Reset Factory Default Settings

H

INFO button



Setup



Other



Reset Factory Default

Reset all the settings on the Setup screens to their factory defaults.

Select Yes .


1 Reset Factory Default Settings

The following settings are reset:

• Brightness, Contrast, Black Level, Volume,

Guidance Prompts

• Basic Settings: Keyboard Layout, Units, Voice

Recognition Tutor, Verbal Reminder, Display

Voice Commands Tips

• Routing & Guidance: Rerouting, Unverified

Area Routing, Edit Waypoint Search Area,

Guidance Mode

• Clock Adjustment: Auto Daylight, Auto Time

Zone, Clock Format Time, Clock Type

• Vehicle: Off-road Tracking

• Color: Map Color, Menu Color

When you transfer the vehicle to a third party, reset all settings to default and delete all personal data.

2 Deleting an Address Book Entry P. 35


2 PIN Numbers P. 37

2 User Name P. 38


2 Edit Avoid Area P. 44

2 Deleting a Paired Phone P. 143

QRG

TOC

Index

Home

53


QRG

TOC

 Data Reset  Clear All Speed Dial

Clear All Speed Dial

H

INFO button



Setup



Other



Clear All Speed Dial

Delete all registered speed dials stored in Bluetooth ® HandsFreeLink®.

Select Yes .


1 Clear All Speed Dial

You can also delete a speed dial individually.

2 Setting Up Speed Dialing P. 145

Index

Home

54



Navigation

QRG

This section describes how to enter a destination, select a route to take, and follow the route to your destination. It also describes how to change your route or destination along the way.

Entering a Destination ..........................

.

56

Address .................................................

58

Address Book.........................................

63

Previous Destinations .............................

64

Place Name ............................................

65

Place Category .......................................

67

Place Phone Number ..............................

72

Coordinate ............................................

73

Intersection ............................................

74

Map Input..............................................

75

Calculating the Route ..............................77

Changing the Route Preference .............

.78

Viewing the Routes ................................

.78

Calculating the Route on the Destination

Map ......................................................

79

Driving to Your Destination ...................80

Viewing the Route ..................................

80

Listening to Voice Guidance ....................

84

Map Menu ................................................85

Displaying the Map Menu .......................

85

Guidance Menu ......................................

87

Showing Icons on the Map .....................

92

Map Legend ...........................................

94

Changing Your Route ............................. 99

Canceling the Route.............................

100

Taking a Detour ...................................

100

Avoiding Streets ...................................

100

Adding Waypoints ...............................

101

Editing My Destination .........................

105

Changing Your Destination ................. 106

Find Nearest Place ................................

106

Selecting a Destination on the Map ......

107

Entering a New Destination ..................

108

Resuming Your Trip .............................. 110

Index

Home

55


Entering a Destination

QRG

TOC

H

DEST button

This section describes how to enter a destination for route guidance.

Select an item.

 Select DEST Menu 2 to display additional menu entries.


1 Entering a Destination d

“Display Menu” , d

“Display Navigation”

If you press the DEST button when en route, the

Route Menu screen is displayed.

2 Changing Your Route P. 99

Prior to departure, you can set areas along your route to avoid.

2 Avoiding Streets P. 100

Certain touchscreen functions are disabled while the vehicle is moving.

2 Limitations for Manual Operation P. 19

Index

Home

56


• Address : Sets a destination by entering an address.

2 Address P. 58

• Address Book : Sets a destination by selecting an address stored in your Address

Book.


• Previous Destinations : Sets a destination by selecting a previous destination.



• Place Name : Sets a destination by entering a place name.

2 Place Name P. 65

• Place Category : Sets a destination by selecting a place/landmark.

2 Place Category P. 67

• Place Phone Number : Sets a destination by entering the phone number of a place/landmark.

2 Place Phone Number P. 72

• Coordinate : Sets a destination by entering latitude and longitude.

2 Coordinate P. 73

• Intersection : Sets a destination (intersection) by entering two streets.

2 Intersection P. 74

• Map Input : Sets a destination by scrolling through the map.

2 Map Input P. 75

• Go Home 1 or 2 : Sets your home address as a destination.

2 Going Home P. 10

 Entering a Destination 


QRG

TOC

Index

Home

57


QRG

TOC

 Entering a Destination  Address

Address

H

DEST button



Address

Enter an address to use as the destination. The state or province you are currently in is displayed (e.g., California).

Select an item.

Index

Home

58


• City : Selects your destination city.

2 Selecting a City P. 60

• Street : Selects your destination street.

2 Selecting a Street P. 61

• Change State : Selects the state or province.

2 Selecting the State or Province P. 59



■

Selecting the State or Province

H

DEST button  Address  Change State

1.

Enter a state name.

 Select List to display a list of states.

2.

Select a state from the list.



QRG

TOC

Index

Home

59



QRG

TOC

■

Selecting a City

H

DEST button  Address  City

The name of the city where you are currently located is displayed.

1.

Enter the name of a different city, or select List for the current city.

 Select List to display a list of cities.


1 Selecting a City by Name

Vehicle position may not be displayed when:

• The automobile is traveling off-road.

• The vehicle position data cannot be updated.

Using Voice Command (English only)

Say d

“ City ” on the Find address by screen, and the following screen is displayed:

Index

Home

60

Non-detailed area mark: Try entering the street first and then select the city.

2.

Select your destination city from the list.

 A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list.

 Next, you are prompted to enter a street name.


Say d

“Current City” to select your current location, or say the name of a different city.


If your city is not listed, it may be part of a larger metropolitan area. Try entering the street first.


■

Selecting a Street

H

DEST button  Address  Street



QRG

1.

Enter the name of your destination street.

 Do not enter the street type

(e.g., street, road, avenue) or direction (e.g., north, south, east, west).

 Select List to display a list of streets.

2.

Select your destination street from the list.

 A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list.

1 Selecting a Street

When entering the names of major freeways, you can use the following abbreviations. For interstates, use an “I” (e.g., I-10). For U.S. freeways, use “US” (e.g., US-18). For state freeways, use the two-character state designation (e.g., CA-101). For county roads, use the appropriate designation (e.g., G-2).

Using Voice Command (English only)

Say d

“ Street ” on the Find address by screen, and the following screen is displayed:

• Say the name of your destination street, and say the street number as a string of individual numbers.

• Set the route to your destination.

2 Calculating the Route P. 77

TOC

Continued

Index

Home

61


QRG


TOC

3.

Enter the street number. Select OK .

 Only valid street numbers can be entered.

4.

Set the route to your destination.



1 Selecting a Street

If you did not select a city first and there is more than one city with the specified street, a list of cities is displayed.

Select the desired city from the list.

Index

Home

62


Address Book

H

DEST button



Address Book

Select an address stored in your address book to use as the destination.

1.

Select your user name.

2.

Select your destination from the list.

3.



 Select

C

or

X

to display only the entries in a category: ALL

,

BUSINESS , PERSONAL , or other categories you have created.

2 Selecting an Address Book

Category P. 34

 Entering a Destination  Address Book


1 Address Book


2 PIN Numbers P. 37

You can select New Address on the Select an address screen to add an entry to the address book.

2 Adding an Address Book Entry P. 32

To switch the list between User 1 or User 2, select the user name on the top right of the screen.

QRG

TOC

Index

Home

63


QRG

TOC

 Entering a Destination  Previous Destinations


H

DEST button




Select an address from a list of your 50 most recent destinations to use as the destination. The list is displayed with the most recent destination at the top.

1.

Select a destination from the list.

2.




1 Previous Destinations

Your home addresses and addresses stored in your address book are not added to the list of previous destinations.

You can delete unwanted previous destinations from the list.


Index

Home

64


Place Name

H

DEST button



Place Name

Enter the name of a place (e.g., business, hotel, restaurant) stored in the map database to use as the destination.

1.

Enter a place name.

2.

Select List to display a list of matching hits.

 Entering a Destination  Place Name


1 Place Name

This option is convenient if you know the exact name of a place.

Select More to enter symbols and accented letters, select Space to enter a space character, or select Delete to remove the last character.

Once a name is entered and selected, select

SORT BY Name or SORT BY Distance .

Matching letters are in yellow.

QRG

TOC

3.

Select a place name from the list.



If the place name is in multiple categories, the categories are displayed when you select it.

2 Place Name in Multiple

Categories P. 66

4.



Index

Home

65


 Entering a Destination  Place Name

QRG


TOC

■

Place Name in Multiple Categories

If the place name is in multiple categories in the map database, the following screen is displayed.

1.

Select a place name.

1 Place Name in Multiple Categories

Select SORT BY Name or SORT BY Distance .

Matching letters are in yellow.

2.

Select a subcategory.

3.



Index

Home

66


Place Category

H

DEST button



Place Category

Select the category of a place (e.g., Banking, Lodging, Restaurant) stored in the map database to search for the destination.

1.

Select a category.

 Entering a Destination  Place Category


QRG

1 Place Category

This option is convenient if you do not know the exact name of a place or if you want to narrow down the number of matches returned for places with a common name.

You can store up to 30 favorite subcategories.

Select Fav. Subcategory to access your favorites.

2 Favorite Subcategories P. 69

Advanced helps you to search the subcategory.

When you enter a keyword and select List , the list of appropriate subcategories is displayed.

TOC

2.




Select b

or n

to change the main category.

2 List of Categories P. 193

Continued

Index

Home

67


QRG


TOC

3.

Select an item.


• Place Name : Searches for a place in the subcategory by name. Enter a city name when prompted.

• Sort by Distance to Travel : Displays all the places in the subcategory sorted by distance from your current location. The closest place is displayed at the top.

• City Vicinity : Searches for a place in the subcategory within a 20-mile radius of a specific city. Enter a city name and then a place name when prompted. Only the first approximately 1000 matching places/landmarks are displayed.

• Search by Keyword : Searches for a place by keyword when you do not know the exact category. Select Sort by Distance to Travel for locations near your current location, or select City Vicinity for locations in a specific city. Enter a keyword when prompted. Select List to view a list of possible locations if one is not found automatically.


1 Place Category

Sort by Distance to Travel

For locations sorted by distance to travel, you can select More to increase the scope of the search.

The number of locations increases to 100, 200, and up to approximately 1000. When the number of locations is 100 or less, you can increase the scope to 500 miles, 1000 miles, or all of U.S.

Index

Home

68


4.

Select a place name from the list.

5.





1 Place Category

The straight line distance (as the crow flies, not driving distance) and direction to the destination are shown for the highlighted place.

QRG

TOC

■

Favorite Subcategories

H

DEST button



Place Category



Fav. Subcategory

Store up to 30 favorite subcategories.

Continued

Index

Home

69


QRG

TOC


■ To store a subcategory in favorites:

1.

Select a category on the Category screen.

2.

Select Add to Fav. Subcategory

.


1 Favorite Subcategories

Stored categories

A subcategory stored in Fav. Subcategory has a star at the end of the line.

3.

Select the favorite subcategories to add. Select OK .

Index

Home

70


■ To delete a subcategory from favorites:

1.

Select Delete on the Favorite

Subcategory screen.



1 Favorite Subcategories

Deleting categories

You can also delete a favorite subcategory on any Subcategory screen. Select

R

or

U

to select a favorite subcategory (which has a star at the end of line) and select Delete from Fav.

Subcategory .

QRG

TOC

2.

Select the subcategories to delete.

 Repeat the procedure as necessary.



Items to be deleted are indicated with a trash icon.

3.

Select OK .

Trash icon

Index

Home

71


QRG

TOC

 Entering a Destination  Place Phone Number

Place Phone Number

H

DEST button



DEST Menu 2



Place Phone Number

Select a destination by phone number. Only phone numbers in the database are recognized.

1.

Enter the area code and phone number. Select OK .

2.




1 Place Phone Number

All 10 digits must be entered.

Phone numbers of private residences entered in your address book are not stored in the database and thus cannot be used to search for a destination.

A list is displayed if there are multiple locations in the database with the same phone number.

Select a place from the list.

Index

Home

72


Coordinate

H

DEST button



DEST Menu 2



Coordinate

Specify a location using latitude and longitude map coordinates.

1.

Enter the latitude. Select OK .

2.

Enter the longitude. Select OK .

3.

Scroll the map to position the cursor over your desired destination, adjusting the map scale as necessary. Press the ENTER button.

 If the address is not the desired location, scroll to another location and try again.

4.

Press the ENTER button again to display the route calculation menu.


5.

Select Set as Dest.

 Entering a Destination  Coordinate


1 Coordinate

Latitude and longitude must be entered up to the seconds’ value.

A yellow box (shown at scales above 1/4 mile) denotes the area that can be viewed when you press the ENTER button on the current map.

Information icons are displayed at scales from 1 mile to 1/4 mile. Place/landmark icons are displayed at 1/8 mile or less. Roads are displayed at 1/4 mile or less.

If you select multiple icons within the cursor radius, you are prompted to select one of the items from a list.

QRG

TOC

Index

Home

73


QRG

TOC

 Entering a Destination  Intersection

Intersection

H

DEST button



DEST Menu 2



Intersection

Select the intersection of two streets as the destination. The state or province for your current location is displayed at the top of the screen (e.g., California).

1.

Select the intersection search method.

2.




• City : Selects the city where the intersection is located. You are prompted to enter the name of the two intersecting streets.


• Street : Selects the two intersecting streets. The city or cities that the streets are located in are displayed.


• Change State : Selects the state or province.



1 Intersection

It is usually easier to select Street to find the streets first. The city or cities that the streets are in will be displayed. If you select City and your city is not listed, it may be part of a larger metropolitan area. Try entering the street first.

If the intersection is outside the state you are currently in, select Change State .


If there is more than one intersection, you are prompted to select the intersection. If the two streets that you have selected do not intersect, no intersection is entered.

Index

Home

74


Map Input

H

DEST button



DEST Menu 2



Map Input

Use the joystick to manually select an icon or a location on the map screen as the destination.

You are prompted to define the map area to display.

1.

Select an item.

 Entering a Destination  Map Input


QRG

TOC


• Current Position : Your current location is centered on the map.

• City : You are prompted to select the city.


• State : You are prompted to select the state.


Continued

Index

Home

75


QRG

 Entering a Destination  Map Input

TOC

2.


 If the address is not the desired location, scroll the map to another location and try again.

3.

Press the ENTER button again to display the route calculation menu.


4.

Select Set as Dest.


1 Map Input

A yellow box (shown at scales above 1/4 mile) denotes the area that can be viewed when you press the ENTER button on the current map.

Information icons are displayed at scales from 1 mile to 1/4 mile. Place/landmark icons are displayed at 1/8 mile or less. Roads are displayed at 1/4 mile or less.

If you select multiple icons within the cursor radius, you are prompted to select one of the items from a list.

2 Selecting a Destination on the Map P. 107

Index

Home

76


Calculating the Route

This section describes how to calculate your route.

1.

Select Set as Dest.

 The system calculates and displays the route line on the map screen.

2 Route Line P. 82


• Route Pref.

: Changes the route preferences (calculating method).

2 Changing the Route Preference P. 78

• View Routes : Displays three different routes.

2 Viewing the Routes P. 78

• Destination Map : Displays a map of the destination.

2 Calculating the Route on the Destination Map P. 79

2.

Follow the route guidance to your destination.

2 Driving to Your Destination P. 80



The system provides you with pop-up messages if your route passes through unverified areas, avoid areas, or areas with traffic restrictions.


1 Calculating the Route

The current route preferences are displayed as icons on the top right of the Calculate Route screen. The straight line distance (as the crow flies, not driving distance) and direction to the destination are shown.

You cannot use voice commands while the system is calculating the route.

Add to Address Book

You can add the destination address to the address book.


Add to My Dest.

You can add the address to the destination list.

2 Editing My Destination P. 105

Call

You can place a telephone call to the destination phone number.


QRG

TOC

Index

Home

77


QRG

TOC

 Calculating the Route  Changing the Route Preference

Changing the Route Preference

Change the route preference by selecting minimum or maximum driving methods.

1.

Select MIN or MAX for each item.

2.

Select OK .


1 Changing the Route Preference

The calculated route may not be the route you would choose. For safety reasons, the system generally applies the following rules to your route:

• Shortcuts through residential areas are avoided.

• Right turns are favored over left turns or Uturns.

• Time-restricted turns (turns prohibited at certain times of the day) are not used.

Viewing the Routes

View three different routes to your destination.

1.

Select a route on the list.

 The travel distance and estimated travel time is displayed for each route.

 The system calculates and displays the route line on the

map screen.

2 Route Line P. 82

2.

Select OK .

1 Viewing the Routes

It is not unusual for some calculated route options to be identical.

Index

Home

78


 Calculating the Route  Calculating the Route on the Destination Map

Calculating the Route on the Destination Map


Calculate the route from the map of the destination address.

Select Calculate the Route.

 The system calculates and displays the route line on the map screen.

2 Route Line P. 82

1 Calculating the Route on the Destination Map d

“Display Destination Map” (when en route)

QRG

TOC

Index

Home

79


Driving to Your Destination

QRG


TOC

This section describes how to follow the route guidance to your destination, and choose the icons displayed on the map screen.

Viewing the Route

■

Map Screen

After calculating the route to your destination, the route is displayed on the map screen.

2 Map Screen Legend P. 7

As you drive, the system tracks your position on the map in real time and provides guidance as you approach each guidance point on the route.

Index

Home

80

1 Viewing the Route d

“Display Map”

You can change the map scale using voice control commands (e.g., say d

“Display 2 mile scale” ).

2 Map Scale Commands P. 185

You can also change the map scale by using the

ZOOM button.

You can control the icons displayed on the map screen using voice control commands (e.g., say d

“Display post office” ).

2 Map Display Commands P. 184

You can obtain information about the route using voice control commands (e.g., say d

“How long to the destination?” ).

2 Route Commands P. 186

You can display the next guidance point on the map screen by saying d

“Display Map Guide”

(when en route).

If you scroll the map while en route, the time and distance to destination indicators are replaced with an indicator showing distance from the current vehicle position.

The map screen can be viewed in single-screen or split-screen mode.



■

Guidance Screen

The guidance screen offers an alternative way to view your route.

 In single-screen mode, press the

MAP/GUIDE button to switch between the map and guidance screens.

 In split-screen mode, press the

MAP/GUIDE button to switch between the next guidance direction and a list of guidance directions.

 Driving to Your Destination  Viewing the Route


QRG

1 Guidance Screen

A visual guide helps you check the guidance screen.

2 Guidance Screen P. 8

TOC

Continued

Index

Home

81


QRG

TOC



■

Route Line

When driving on verified streets, the route line is light blue. The route line display changes when driving on unverified streets:

Vector line (dotted)

 If Unverified Area Routing is Off , the route line uses verified streets only (when possible). A dotted

“vector line” pointing directly towards your destination is also displayed.

1 Route Line

You can set Unverified Area Routing to Off to follow your own route to the destination. If

Unverified Area Routing is On , be aware that unverified streets may not be displayed accurately.


You can always view the entire route by simply saying d

“Display entire route.”

Blue-pink route line

 If Unverified Area Routing is On , the route line changes to a dashed blue-pink line to indicate that the route line uses unverified streets.

Index

Home

82




QRG

■

Deviating From the Planned Route

If you leave the calculated route, the system automatically recalculates a route to the desired destination based on your current location and direction.

2 Rerouting P. 41

1 Deviating From the Planned Route

If Rerouting is set to Manual and you go off route, the system waits for you to manually initiate recalculation. Select Recalc.

2 Rerouting P. 41

TOC

■

Driving Off-road

If you leave all mapped (digitized) roads, the system automatically starts displaying a series of dots (breadcrumbs) to track the path you are taking. If needed, you can follow the dots back to the mapped road you originally left.


1 Driving Off-road

A message “Not on a digitized road” may appear when you drive half a mile away from a mapped road.

Breadcrumbs may occasionally be displayed in urban areas, such as large parking lots in shopping malls, in new subdivisions where the roads are not yet in the database, or in areas where a GPS signal is unavailable, such as in a parking garage.

Off-road tracking breadcrumbs are limited to approximately 150 miles. Breadcrumbs at the beginning of the trail are deleted if you exceed that distance.

Breadcrumbs are displayed only at 1/20, 1/8, 1/4, and 1/2 mile map scales.

Index

Home

83


QRG

TOC

 Driving to Your Destination  Listening to Voice Guidance

Listening to Voice Guidance

H

MAP MENU (on map)



VOICE

As you approach each guidance point, a pop-up window is displayed on the map screen with instructions for you to follow. Voice guidance for each guidance point is also provided.

Typically, you hear three prompts:

• 1/2 mile from the guidance point (2 miles on freeway)

• 1/4 mile from the guidance point (1.2 miles on freeway)

• Just before the guidance point

To replay voice guidance, select VOICE on the map menu.

If you select VOICE on the map menu between guidance points, voice guidance for the next guidance point is provided.


1 Listening to Voice Guidance d

“Voice” (on the map screen)

You can turn voice guidance off if you prefer.


When driving in unverified areas, the phrase “if possible” is inserted before each voice guidance prompt.

VOICE on the map menu may be grayed out if the vehicle is approaching or is in an unverified area with Unverified Area Routing set to Off .

The timing of voice guidance varies depending on the type of road you are on and the distance to the next guidance point.

Index

Home

84


Map Menu

Displaying the Map Menu

Use the Map Menu to control the icons displayed on the screen. You can also use the Map Menu to find locations or to cancel the route.

1.

On the map screen, select MAP

MENU (if displayed).

 The Map Menu is displayed on the map screen.


1 Map Menu

If you scroll the map while en route, press the

MAP/GUIDE (or CANCEL/BACK) button to return to the current position map screen, then select

MAP MENU .

QRG

TOC

2.

Select an item.


• Cancel Route: Cancels your current route.

2 Canceling the Route P. 100

• Show icon on Map: Selects the icons to display on the map.

2 Showing Icons on the Map P. 92

• Map Legend: Displays an overview of the map features.

2 Map Legend P. 94

Continued

Index

Home

85


 Map Menu  Displaying the Map Menu

QRG

TOC

• Guidance Menu: Allows you to set or confirm the guidance points and freeway exits for your route.

2 Guidance Menu P. 87

• Find Nearest…: Allows you to find the nearest place/landmark (e.g., nearest gas station) by specifying a category. You can then add the location to the list of destinations, set as a waypoint, or set as your destination.

2 Changing Your Destination P. 106

• Exit Info : Displays a list of the freeway exits.

2 Freeway Exit Information P. 89


Index

Home

86


Guidance Menu

H

MAP MENU (on map)



Guidance Menu

Display the guidance points and freeway exits for your route, and set the display mode for the map and guidance screens.

Select an item.


• Directions : Displays a list of the guidance points.

2 Directions P. 88

• Guidance Mode : Selects the guidance display mode.


 Map Menu  Guidance Menu


QRG

TOC

Index

Home

87



QRG


TOC

■

Directions

H

MAP MENU (on map)  Guidance Menu  Directions

Display a list of the guidance points on your route for your confirmation.

Select R or U to scroll through the list.

 Press the MAP/GUIDE button to return to the map screen.

1 Directions

Guidance points with exit information are indicated by a (freeway exit information) icon. Select Exit Information to display the exit information.

2 Freeway Exit Information P. 89

The route guidance information is automatically deleted when you reach your destination.

Index

Home

88


■

Freeway Exit Information

H

MAP MENU (on map)  Exit Info.

Display a list of the freeway exits for the route. You can view freeway exit information (whether the exit is near gas stations, restaurants, ATMs, etc.) and add new destinations or waypoints to the calculated route.

1.

Select an exit from the list.



QRG

1 Freeway Exit Information d

“Display Freeway Exit Information”

You can scroll the map and select a (freeway exit information) icon on the map screen to display the freeway exit information. The icon is only displayed if there is exit information available.

Icons are displayed only at 1/4, 1/2, or 1 mile scale.

2 Showing Icons on the Map P. 92

The route guidance information is automatically deleted when you reach your destination.

TOC

2.

Select a list item.

 Select

C

or

X

to display information for different exits.



The location is displayed on the

Calculate Route screen.


Index

Home

89



QRG


TOC

■

Guidance Mode

H

MAP MENU (on map)  Guidance Menu  Guidance Mode

Select the display mode during route guidance: single-screen mode (default) or splitscreen mode.

Select an option.

1 Guidance Mode

The guidance mode can also be selected from the System Setup menu.

2 Routing & Guidance P. 40


• Single Screen: Displays the map and guidance screens on separate screens.

Map screen Guidance screen

Press the

MAP/GUIDE button

Index

Home

90

Press the

MAP/GUIDE button

Directions list screen

Press the

MAP/GUIDE button


• Split Screen: Displays the map and guidance information simultaneously on the map screen.

Next guidance point Guidance direction list

Press the

MAP/GUIDE button



QRG

1 Guidance Mode

Next guidance point

The next guidance point (the pop-up window) is displayed on the map screen as you approach a guidance point in the single-screen mode.

TOC

Press the

MAP/GUIDE button

Directions list screen

Press the

MAP/GUIDE button

Index

Home

91


QRG

TOC

 Map Menu  Showing Icons on the Map

Showing Icons on the Map

H

MAP MENU (on map)



Show icon on Map

The icon bar along the bottom of the screen allows you to select the icons that are displayed on the map.

Select an icon in the icon bar.



Selecting toggles the icon display on or off.



1 Showing Icons on the Map

You can display or hide the icons using voice commands on the map screen (e.g., say d

“Display hospital” ).



• Icon check boxes : Displays or hides the landmark icons.


• ALL OFF : Hides all icons.

• Icon Options : Fine-tunes the icon display.

2 Fine-tuning the Icons P. 93

Index

Home

92


 Map Menu  Showing Icons on the Map


QRG

■

Fine-tuning the Icons

H

MAP MENU (on map)  Show Icon on Map  Icon Options

Icons in some categories can be fine-tuned to display or hide.

1.

Select an icon category from the list

(e.g., Other Icons ).

1 Fine-tuning the Icons

To display the “Other Icons,” be sure to turn on

OTHER ICON in the icon bar.

TOC

2.

Select the icons to display on the map.



Selecting toggles the icon display on or off.


3.

Select OK .

Index

Home

93


QRG

TOC

 Map Menu  Map Legend

Map Legend

H

MAP MENU (on map)



Map Legend

See an overview of the map lines, areas, routes, and navigation icons.

Select an item.

 The system displays the map legend.


1 Map Legend

A visual guide helps you see the map legend.


Index

Home

94


■

Map Scale and Functions

The functions that are available from the map screen depend on the map scale.

Function page 1/20 1/8

Map Scale (top: mile, bottom: metric)

1/4 1/2 1 2 5 15 50 150 350 1000

80 200 400 800 1.6

3 8 24 80 240 560 1600

Icon display

Landmark icon

Exit info.

One-way traffic

7

7

7

Waypoint

“flag”

8

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

Map orientation

Heading-up

97

North-up

Others

97

Off-road tracking dots

83

Unverified road

7

Map features

7

Avoid areas

44

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔



QRG

1 Map Scale & Functions

You can change the map scale using voice commands on the map screen (e.g., say d

“Display 2 mile scale” ).

2 Map Scale Commands P. 185

You can change between miles or kilometers.

2 Basic Settings P. 24

TOC

Index

Home

95


QRG


TOC

■

Map Icons and Functions

Display or hide all icons on the map screen, with the exception of Honda/Acura

Dealer icons which are always shown.

■ Landmark icon

Type

Honda/Acura dealer

Hospital

School

ATM

Gas station

Restaurants

Post office

Grocery store

Hotel/Lodging

Police station

Shopping, Tourist attraction, Bank

Parking garage

Parking lot

Freeway exit info.

Icon display control

Always on

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

No icon

No icon

Yes

Yes

Yes

No

Yes

Yes

Yes

Yes

Yes

Yes

No

Icon selectable

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

No

Yes

Yes

Yes

Yes

Icon searchable

Yes

Yes

Yes

Yes

Yes

Yes

Index

Home

96


1 Map Icons & Functions

You can display or hide the icons using voice commands on the map screen (e.g., say d

“Display hospital” ).


Some icons, like police stations, are not shown, but you can still locate the nearest one with the

Find Nearest voice command (e.g., say d

“Find nearest police station” ).

2 Find Place Commands P. 185

Icon display control

Icons that can be displayed or hidden.

Icon selectable

Icons that can be selected as a destination using the joystick.

Icon searchable

Icons that can be searched using the d

Find

Nearest voice command.


■

Map Orientation

Select the map orientation icon to change the map orientation.

Map orientation icon Map orientation icon

Select

Select

North-up : Displays the map with

North always pointing up.

Heading-up : Displays the map so that the direction you are traveling is always pointing up.



QRG

1 Map Orientation d

“Display Heading-up” (from map screen), d

“Display North-up” (from map screen)

The red arrow in the symbol always points North.

On scales greater than 1 mile, North-up mode is always used.

TOC

Index

Home

97


QRG

TOC



■

Current Location

Display and save your current location for future use as a destination. The address, latitude, longitude, and elevation of your current location are displayed.

■ To save your current location in the address book:

1.

Select the vehicle icon on the map.

2.

Select Save .

3.

Edit the name, phone number, and category.


4.

Select OK .

1 Current Location d

“Display Current Location” (on map screen)

You can also save the current location by saying d

“Register the Current Location” .


2 PIN Numbers P. 37

The elevation is not displayed if the system is receiving insufficient GPS information. When elevation is displayed, it may differ with roadside elevation signs by ±100 feet or more.

Saving your current location does not change or cancel your current route.

Index

Home

98


Changing Your Route


QRG

H

DEST button (when en route)

This section describes how to alter your route, add an interim “waypoint” (pit stop), choose a different destination, cancel your current destination, and continue your trip after stopping.

Select an item.

1 Changing Your Route d



(when en route)

If you press the DEST button when not en route, the Destination Menu screen is displayed.

2 Entering a Destination P. 56

TOC


• Cancel Route : Cancels the route guidance.

2 Canceling the Route P. 100

• Detour : Calculates a detour route.

2 Taking a Detour P. 100

• Avoid Streets : Avoids streets along your route.


• Change Route Pref.



• Waypoint : Sets waypoints along your route.

2 Adding Waypoints from the Route Menu P. 102

• My Destination : Shows a list of waypoints. You can delete waypoints or edit the order of them.


Index

Home

99


QRG

 Changing Your Route  Canceling the Route

Canceling the Route

H




Cancel Route

Cancel the route guidance and remove the destination and all waypoints from the destination list. The system then returns to the map screen.

TOC

Taking a Detour

H




Detour

Calculate a detour route manually. The system attempts to calculate a new route by avoiding the next 5 miles (while on a freeway) or 1 mile (while on a surface street).


1 Canceling the Route

You can also cancel your route from the Map

Menu.

2 Map Menu P. 85

1 Taking a Detour

The detour option is convenient if you encounter an unexpected obstacle such as a road closure or extremely heavy traffic congestion.

Avoiding Streets

H




Avoid Streets

Select a street or streets along your route to avoid.

1.

Select the street you want to avoid.



Repeat the procedure to avoid other streets.

 Streets to be avoided are indicated with a trash icon.

1 Avoiding Streets

Avoiding certain streets is convenient if you know of road construction, road closures, or excessive traffic along the route.

You cannot choose specific streets you want to use, only those to avoid. However, you can select intersections or waypoints (places/landmarks) that the system will use in your route.

2 Adding Waypoints P. 101

You can store up to 10 streets to avoid. You cannot avoid your current street or the streets of your waypoint(s) or destination (system beeps if selected).

Index

Home

100


2.

Select OK .

 The system calculates a new route.

 Changing Your Route  Adding Waypoints


QRG

TOC

Adding Waypoints

Add up to four waypoints (pit stops) along the route to your destination.

Waypoints are displayed on the map screen as small, numbered red flags.

The route follows the waypoints in the order they are listed in the destination list.

1 Adding Waypoints

Waypoints allow you to stop for gas or food, for example, and then continue on to your destination.

Press the MAP/GUIDE button to return to the map screen without adding a waypoint at any time.

The search corridor used for adding waypoints can be adjusted.


You can delete waypoints or edit the order of

waypoints in the destination list.


Index

Home

101


QRG


TOC

■

Adding Waypoints from the Route Menu

H

DEST button (when en route)  Waypoint

1.

Select a search method to add a waypoint.


1 Adding Waypoints

Search method

“Search around” method

Index

Home

102


• Places Along the Route : Searches within a “corridor” on either side of the route.

• Places Around the Destination : Searches in a spiral pattern around the destination.

• Places Around the Waypoint : Searches in a spiral pattern around the location you select.

2.

Select the location when you select

Places Around the Waypoint .

“Search along” method

The search corridor used for adding waypoints can be adjusted.



3.

Select a waypoint category (e.g.,

Auto Service ).

4.

Select a waypoint subcategory

(e.g., GAS STATION ).

5.

Select a place.

 The waypoint is added to the destination list.



The route is automatically recalculated and displayed on the map screen.



QRG

TOC

Index

Home

103


QRG


TOC

■

Adding Waypoints from the Calculate Route Screen

1.

Select a new address or location.

2.

Select ADD TO My Dest.

3.

Select

R

or

U

to select a location in the destination list. Select OK .

4.

Select OK .

 The route is automatically recalculated and displayed on the map screen.

Index

Home

104



Editing My Destination

H




My Destination

Delete or edit the order of waypoints.

1.

Select Edit .

 Select Map to display the destination and waypoints on the map screen.

 Changing Your Route  Editing My Destination


QRG

TOC

2.

Select an item.

3.

Select OK .



The route is automatically recalculated and displayed on the map screen.


• Delete : Select a list item to delete.

• Edit Order : Select a list item to move, select R or U to select a new location.

Index

Home

105


Changing Your Destination

QRG


TOC

There are several methods you can use to change the route destination.

Find Nearest Place

H

MAP MENU (on map)



Find Nearest…

Search for the nearest place/landmark on the map screen and set it as your destination.

1.

Select Find Nearest… .

2.

Select a category type.

3.


4.

Select a place.

5.

Select Set as Dest.

6.

Select an item to set the place as a destination or add to the destination list.



The system calculates the route.


1 Find Nearest Place d

“Find Nearest…” (on map screen)

The Find Nearest voice command is the fastest method of specifying a place/landmark as your destination. Many kinds of places can be found.

2 Find Place Commands P. 185

Index

Home

106


 Changing Your Destination  Selecting a Destination on the Map


Selecting a Destination on the Map

Select a new destination when en route by selecting a location on the map.

1.


 If the address displayed is not the desired location, press the

CANCEL/BACK button and repeat the procedure.

2.

Press the ENTER button again.

3.

Select a place.

4.

Select Set as Dest.


1 Selecting a Destination on the Map

If there is more than one icon or street under the map cursor, you are prompted to select the item from a list.

• Select an item.

• If you select Map Icon , select a place.

QRG

TOC

Continued

Index

Home

107


QRG

 Changing Your Destination  Entering a New Destination

TOC

5.

Select an option.




• Set as New Destination : Sets the location as your new destination.

• Add to My Destination : Sets the location as a new waypoint.

Index

Home

108

Entering a New Destination

H




DEST Menu 1 or DEST Menu 2

Enter a new destination using the Destination Menu screen even when you are en route.

1.

Select a method to enter a new destination.

2 Entering a Destination P. 56

 After entering a new destination, the address is displayed on the Calculate

Route screen.

2.

Select Set as Dest.

1 Entering a New Destination d




3.

Select an option.


 Changing Your Destination  Entering a New Destination


QRG

TOC


• Set as New Destination : Sets the location as your new destination.

• Add to My Destination : Sets the location as a new waypoint.

Index

Home

109


Resuming Your Trip

QRG

TOC

Stop your vehicle en route (e.g., to rest, stop for gas, etc.), and then continue on your route.

If you did not complete your route, the Continue Trip screen is displayed when you restart your vehicle.

Select OK.

 You can continue on the same route.


1 Resuming Your Trip

The Continue Trip screen has the same options as when you calculate a route.


To cancel your destination, press the CANCEL/

BACK button.

Add to Address Book

You can add the destination address to the address book.


Call

You can place a phone call to the destination phone number.


• Route Pref.



• View Routes : Displays three different routes.

2 Viewing the Routes P. 78

• Destination Map : Display a map of the destination.

2 Calculating the Route on the Destination Map P. 79

Index

Home

110



Audio

QRG

This section describes how to operate the audio system. You can play music from a wide array of media sources, and control the audio system using the audio buttons, the touch screen, or voice control.

Audio System ........................................

112

About Your Audio System....................

112

Auxiliary Input Jack ..............................

112

System Theft Protection .......................

113

Playing FM/AM Radio ...........................

1 14

Selecting FM/AM Mode........................

114

Audio Screen Control...........................

115

Audio Menu ........................................

116

Radio Data System (RDS) ......................

117

Playing a Disc ........................................ 119

Selecting Disc Mode.............................

119

Audio Screen Control...........................

120

Playing MP3/WMA/AAC Discs ..............

121

Recommended Discs ............................

122

Playing an iPod® ...................................

123

Selecting iPod® Mode ..........................

124

Audio Screen Control............................

125

Searching for Music ..............................

126

Playing a USB Flash Drive .....................127

Selecting USB Mode..............................

128


129

Pla y in g

Tracks in Folders........................

130

Playing Bluetooth ® Audio ....................

131

Selecting Bluetooth

® Audio Mode........

131

Switching to HFL Mode .........................

132


133

Adjusting the Sound ............................. 134

Audio Remote Controls ........................ 135

Steering Wheel Controls ......................

135

Index

Home

111


QRG

TOC

Audio System

About Your Audio System

The audio system features FM/AM radio. It can also play audio discs, WMA/MP3/

AAC tracks, iPods®, USB flash drives, and Bluetooth ® devices.

The audio system is operable from the buttons and switches on the panel, or the remote controls on the steering wheel.

2 Audio Remote Controls P. 135

2 Audio System P. 6

iPod®


1 About Your Audio System

Video CDs, DVDs, and 3-inch/8-cm mini discs are not supported.

Do not leave the iPod® or USB flash drive in the vehicle. Direct sunlight and high temperatures may damage it.

iPod® is a registered trademark owned by Apple

Inc.

You can operate the audio system by voice commands.

2 Audio Commands P. 186

Remote Control

USB Flash

Memory

Auxiliary Input Jack

Index

Home

112

Use the jack in the console compartment to connect standard audio devices.

1.

Open the AUX cover.

2.

Connect a standard audio device to the input jack using a 1/8 inch/3.5 mm stereo miniplug.

 The audio system automatically switches to the AUX mode.

1 Auxiliary Input Jack

To switch the mode, press any of the other audio mode buttons. You can return to the AUX mode by pressing the AUX button.


System Theft Protection

The system is disabled when it is disconnected from the power source, such as when the battery is disconnected or goes dead.

■ Reactivating the system

1.

Turn the ignition switch to ON (II), and turn on the system.



If you turn the ignition switch to ACCESSORY (I), you will be requested to enter the security code. See step 3.

2.

Press and hold the VOL

9

(Volume/Power) button again for more than two seconds.

 The system is reactivated when the system’s control unit recognizes that the system is in your vehicle.

 If the control unit fails to recognize, “ENTER CODE” appears on the navigation screen.

3.

Enter the security code. If you do not enter the code correctly after 10 tries, leave the system for one hour before trying again, or visit a dealer to have the system reset.

 Audio System  System Theft Protection


QRG

1 System Theft Protection

Find the audio system’s security code and serial number label in your Owner’s Manual kit.

Do not store the label in your vehicle. If you lose the label, you must first retrieve the serial number, and then obtain the code from a dealer.

U.S. Only

You can register the security code at Owner Link

( owners.honda.com.

). To find information on how to retrieve the serial number and obtain the code, visit radio-navicode.honda.com

.

2 Entering the Security Code P. 172

TOC

Index

Home

113


QRG

Playing FM/AM Radio

Selecting FM/AM Mode

TOC

Preset keys

1.

Press the FM/AM button.



Press the FM/AM button again, if necessary, to select the frequency band (FM1, FM2,

AM).

 The band and frequency are displayed.

2.

Select AUDIO/STREET until

AUDIO is highlighted in blue.

 The preset keys are displayed at the bottom of the screen.



The audio information is displayed at the bottom of the screen.

3.

Select the preset key.

 You can also select a station using the SEEK/SKIP button.


1 Playing FM/AM Radio d

“Display audio screen”

You can control the radio using voice commands.

2 Radio Commands P. 186

A visual guide helps you operate the audio system.


2 Basic Operation P. 6

The ST indicator comes on the display for stereo

FM broadcasts. Stereo reproduction in AM is not available.

The radio can receive the complete AM and FM bands:

AM band: 530 to 1710 kHz

FM band: 87.7 to 107.9 MHz

You can store six AM stations and 12 FM stations in the preset buttons. FM1 and FM2 let you store six stations each.

Index

Home

114


Audio Screen Control

H

AUDIO button (in FM/AM mode)

Control the audio system through the navigation screen.

Frequency band Stereo indicator

Open/Close icon

1.

Select a frequency band ( AM ,

FM1 , or FM2 ).

2.

Select a preset station.

 Touch and hold a preset key until a beep sounds to store the current station in the key.

 Playing FM/AM Radio  Audio Screen Control


1 Audio Screen Control

The A.SEL indicator comes on the display when

AUTO SELECT is on. If you do not like the stations Auto Select has stored, you can change the frequencies stored in the preset buttons manually.

QRG

TOC

Preset stations


• TUNE : Tunes the radio to the frequency you select. Select b

or n

to select a frequency.

• SCAN : Scans for stations with a strong signal in the current band and plays a

10-second sample. Select Stop to stop scanning and play the current selection.

• AUTO SELECT : Scans and automatically stores up to six AM stations and 12 FM stations with a strong signal in the preset buttons.

• AUDIO MENU : Sets the RDS options and sound preferences.

• SOURCE : Changes the source mode.

• Open/Close icon : Displays/hides the detailed information.

Index

Home

115


QRG

 Playing FM/AM Radio  Audio Menu

Audio Menu

H

AUDIO button (in FM/AM mode)



AUDIO MENU

Select an item.

TOC


• RDS search : Searches for programs by RDS category.

2 Searching for Programs by RDS Category P. 117

• Radio Text : Displays the text information broadcast by the current RDS station.

2 Radio Text Display P. 118

• RDS INFO : Sets whether to display the RDS Information on the screen.

2 RDS Info Display P. 117

• SOUND : Displays the sound preferences screen.

2 Adjusting the Sound P. 134

Index

Home

116



Radio Data System (RDS)

Provides text data information related to your selected RDS-capable FM station.

■

RDS Info Display

When RDS INFO is set to ON, the name of the FM station is displayed. When set to

OFF, the frequency of the station is displayed.

 Playing FM/AM Radio  Radio Data System (RDS)


QRG

TOC

■

Searching for Programs by RDS Category

H

AUDIO button (in FM/AM mode)  AUDIO MENU  RDS search

Search for FM stations with a strong signal that broadcast the selected RDS category information.

1.

Select a search method ( Seek up ,

Seek down , Scan ).

2.

Select a category.

 Scanning for stations in that category begins. When an RDS station is found, it begins to play.



If there are no RDS-capable stations in the area, “NOTHING” briefly appears on the display.

Index

Home

117


QRG

 Playing FM/AM Radio  Radio Data System (RDS)

■

Radio Text Display

H

AUDIO button (in FM/AM mode)  AUDIO MENU  Radio Text

Display the radio text information of the selected RDS station.

TOC


1 Radio Text Display

The RDS indicator comes on the display when the selected RDS station is broadcasting text data.

Index

Home

118


Playing a Disc

Selecting Disc Mode

Audio control

1.

Press the CD/AUX button.

2.

Insert a disc into the disc slot.

 The disc automatically begins playing.

3.



 The audio information is displayed at the bottom of the screen.

4.

Select c

or x

to select a track.



You can also select a track using the SEEK/SKIP button.

 The track number and elapsed time are displayed on the display. Text information stored on MP3/WMA/AAC discs is also displayed.


1 Playing a Disc d


You can control the disc using voice commands.

2 Disc Commands P. 187




In some cases, the name of the artist, album, or track may not appear correctly.

Do not use discs with adhesive labels. The label can cause the disc to jam in the unit.

WMA tracks protected by digital rights management (DRM) cannot be played.

The audio system displays Unplayable File, then skips to the next track.

If there is a problem, you may see an error message on the display.

2 Error Messages P. 166

If you eject the disc but do not remove it from the slot, the system reloads the disc automatically after several seconds.

QRG

TOC

Index

Home

119


QRG

TOC

 Playing a Disc  Audio Screen Control


H

AUDIO button (in DISC mode)

Control the audio system through the navigation screen.

Disc mode Open/Close icon Select a track.

 Select the Folder tab to display the list of folders on MP3/WMA/AAC discs having a folder structure.

2 Playing MP3/WMA/AAC Discs

P. 121


1 Repeat and Random Play

To stop repeat- or random-play, select the current play mode button again.

Index

Home

120

Track list

The following items are available, depending on the type of disc:

• FOLDER : Select b

or n

to select a folder on MP3/WMA/AAC discs having a folder structure.

• SCAN :

S

Scan Track : Scans all tracks on the disc (or in the selected folder) in the order they were recorded (stored) and plays a 10-second sample. Select Stop to stop scanning and play the current selection.

(

Scan Folder : Scans the first track in each folder on the disc and plays a 10second sample. Select Stop to stop scanning and play the current selection.

• PLAY MODE :

"

Random All : Plays all tracks on the current disc in random order.

#

Random in Folder : Plays all tracks in the current folder in random order.

$

Repeat 1 Track : Repeats the current track.

%

Repeat 1 Folder : Repeats all tracks in the current folder.


 Playing a Disc  Playing MP3/WMA/AAC Discs


QRG





Playing MP3/WMA/AAC Discs

H

AUDIO button (in DISC mode)  Folder

Change the folder on MP3/WMA/AAC discs that have tracks stored in a folder structure.

Touch to close the folder.

Folder list

1.

Select a folder.



The system displays the track list.

2.

Select a track.



The system begins playing the selected track.

1 Playing MP3/WMA/AAC Discs

Folder List

• Any tracks not in a folder are automatically added to a “ROOT” folder, which is displayed at the top of the Folder List.

• If the root folder has additional folders in a lower layer, they are listed on the screen.

Back to Current Track : Displays the current track at the top of the list.

TOC

Touch to open the folder.

Index

Home

121


QRG

 Playing a Disc  Recommended Discs

Recommended Discs

• Use only high-quality CD-R or CD-RW discs labeled for audio use.

• Use only CD-R or CD-RW discs on which the recordings are closed.

• Play only standard round-shaped discs.

The disc packages or jackets should have one of these symbols.

TOC

■ Discs with MP3, WMA, or AAC Tracks

• Some software files may not allow for audio play or text data display.

• Some versions of MP3, WMA, or AAC formats may be unsupported. If an unsupported track is found, the audio unit displays Unsupported, and then skips to the next track.


1 Recommended Discs

A Dual-disc cannot play on this audio unit. If recorded under certain conditions, a CD-R or CD-

RW may not play either.

Index

Home

122


Playing an iPod®

■

Connecting an iPod®

1.

Unclip the USB connector in the center console and loosen the adapter cable.

2.

Install the iPod® dock connector to the USB connector.

■

Model Compatibility

Model iPod (5th generation) iPod classic 80GB/160GB iPod classic 120GB iPod classic 160GB (launch in 2009) iPod nano iPod touch iPhone 3GS iPhone 4


1 Connecting an iPod®

• Do not use an extension cable with the USB adapter cable.

• Do not connect the iPod® using a hub.

• Do not use a device such as a card reader or hard disk drive, as the device or your tracks may be damaged.

• We recommend backing up your data before using the device in your vehicle.

• Displayed messages may vary depending on the device model and software version.

Your audio system may not work with all software versions of these devices.

If the audio system does not recognize the iPod®, try reconnecting it a few times or reboot the device.

QRG

TOC

Index

Home

123


QRG

 Playing an iPod®  Selecting iPod® Mode

Selecting iPod® Mode

TOC

Audio control

1.

Connect the iPod® to the USB adapter cable in the center console.

2.

Press the CD/AUX button until you get to iPod® mode.

3.






4.

Select c

or x

to select a track.

 You can also select a track using the SEEK/SKIP button.

 The current track number and total number of tracks are displayed.


1 Playing an iPod® d


You can control the iPod® using voice commands.

2 iPod® Commands P. 188





Available operating functions vary on models or versions. Some functions may not be available on the vehicle’s audio system.



Index

Home

124



H

AUDIO button (in iPod® mode)

Control the audio screen through the navigation system.

iPod® mode Open/Close icon

Select a track.

 Select the menu tab to change songs in the track list.

2 Searching for Music P. 126

 Playing an iPod®  Audio Screen Control


1 Repeat and Shuffle Play

To stop repeat- or shuffle-play, select the current play mode button again.

QRG

TOC

Track list


• PLAY MODE

"

Shuffle All : Plays all tracks in the track list in random order.

&

Shuffle Album : Plays all tracks in the track list in random order by albums.

Each song in an album is played in the right order and only the order of albums is randomized.

$


• SOUND: Displays the sound preferences screen.




Index

Home

125


QRG

 Playing an iPod®  Searching for Music

Searching for Music

H

AUDIO button (in iPod® mode)

Search for music using the iPod® menu.

iPod® menu tab

1.

Select the menu tab.

2.

Select a search category (e.g.,

Album ).

TOC


1 Searching for Music

The order of the track list displayed if you select

“All” on the iPod® menu varies depending on the iPod® model and software.


3.

Select an item.

 The selection begins playing.

Index

Home

126


Playing a USB Flash Drive

■

Connecting a USB Flash Drive

1.

Unclip the USB connector in the center console and loosen the adapter cable.

2.

Install the USB flash drive to the USB connector.

■

USB Flash Drives

Use a recommended USB flash drive of 256 MB or higher.

Some digital audio players may not be compatible.

Some USB flash drives (e.g., a device with security lockout) may not work.

Some software files may not allow for audio play or text data display.

Some versions of MP3, WMA, or AAC formats may be unsupported.


QRG

1 Connecting a USB Flash Drive

• Do not use an extension cable with the USB adapter cable.

• Do not connect the USB flash drive using a hub.

• Do not use a device such as a card reader or hard disk drive, as the device or your tracks may be damaged.

• We recommend backing up your data before using the device in your vehicle.

TOC

Index

Home

127


QRG

 Playing a USB Flash Drive  Selecting USB Mode

Selecting USB Mode

1.

Connect the USB flash drive to the

USB adapter cable in the center console.

2.

Press the CD/AUX button until you get to USB mode.

TOC

Audio control

3.






4.

Select c

or x

to select a track.

 You can also select a track using the SEEK/SKIP button.

 The current track number and total number of tracks are displayed.


1 Playing a USB Flash Drive d


You can control the USB flash drive using voice commands.

2 USB Commands P. 187





Tracks on the USB flash drive are played in their stored order. This order may be different from the order displayed on your PC or device.

The audio system displays Unplayable File, and then skips to the next track when the following tracks are played:

• Tracks in WMA format protected by digital rights management (DRM)

• Tracks in unsupported format



Index

Home

128



H

AUDIO button (in USB mode)


USB mode Open/Close icon

Select a track.

 Select the Folder tab to display the folder list.

2 Playing Tracks in Folders P. 130

 Playing a USB Flash Drive  Audio Screen Control


QRG

TOC

Track list


• FOLDER : Select b

or n

to select a folder.

• SCAN :

S

Scan Track : Scans all tracks in the current folder in the order they were stored and plays a 10-second sample. Select Stop to stop scanning and play the current selection.

(

Scan Folder : Scans the first track in each folder on the USB flash drive and plays a 10-second sample. Select Stop to stop scanning and play the current selection.

Continued

Index

Home

129


QRG

 Playing a USB Flash Drive  Playing Tracks in Folders

TOC

• PLAY MODE :

"

Random All : Plays all tracks on the USB flash drive in random order.

#

Random in Folder : Plays all tracks in the current folder in random order.

$


%

Repeat 1 Folder : Repeats all tracks in the current folder.




• Open/Close icon : Displays/hides the detail information.

Playing Tracks in Folders

H

AUDIO button (in USB mode)  Folder

Change the folder if the tracks are stored in a folder structure.

Touch to close the folder.

Folder list

1.

Select a folder.

 The system displays the track list.

2.

Select a track.

 The system begins playing the selected track.


1 Repeat and Random Play

To stop repeat- or random-play, select the current play mode button again.

1 Playing Tracks in Folders

Folder List

• Any music tracks not in a folder are automatically added to a “ROOT” folder, which is displayed at the top of the Folder List.

• If the root folder has additional folders in a lower layer, they are listed on the screen.


Index

Home

130

Touch to open the folder.


Playing Bluetooth ® Audio

Your audio system allows you to listen to music tracks stored on your Bluetooth compatible phone.

This function is available when the phone is linked to the vehicle’s Bluetooth ®

HandsFreeLink® (HFL) system.


Selecting Bluetooth ® Audio Mode

1.

Make sure that your phone is on, paired, and linked to HFL.

2 Pairing a Phone P. 140

2.

Press the CD/AUX button until you get to Bluetooth ® Audio mode.

 A Bluetooth ® message and icon are displayed on the display and screen.

3.



 The audio information is displayed at the bottom of the screen.


1 Playing Bluetooth ® Audio d


You can control the Bluetooth ® Audio using voice commands.

2 Bluetooth ® Audio Commands P. 188

Not all Bluetooth -enabled phones with streaming audio capabilities are compatible. To check if your phone is compatible:

• U.S.: Visit automobiles.honda.com/ handsfreelink .

• Canada: Visit www.handsfreelink.ca

.

• Call HandsFreeLink customer support at

(888) 528-7876.

In some states, it may be illegal to perform some data device functions while driving.


Only one phone can be used with HFL at a time.

When there are more than two paired phones in the vehicle, the first paired phone the system finds is automatically linked.

QRG

TOC

Continued

Index

Home

131


 Playing Bluetooth ® Audio  Switching to HFL Mode

QRG

TOC

4.

Select c

or x

to select a track.

5.

If necessary, follow the cell phone operating instructions for playing audio tracks.


1 Playing Bluetooth ® Audio

If more than one phone is paired to the HFL system, there may be a delay before the system begins to play.

A “NO CONNECT” message may be displayed if:

• The phone is not linked to HFL.

• The phone is not turned on.

• The phone is not in the vehicle.

• An incompatible phone is connected.

Index

Home

132

Audio control

Check the following if the phone is not recognized:

• Another HFL-compatible phone, which is not compatible for Bluetooth ® Audio, is already connected.

Switching to HFL Mode

h

(Pick-Up) button j

(Hang-Up) button

1.

If you receive a call when

Bluetooth ® Audio is playing, press the h

(Pick-Up) button on the steering wheel to answer the call.

2 Bluetooth ® HandsFreeLink®

P. 138

2.

Press the j

(Hang-Up) button to end the call, and Bluetooth ® Audio is resumed.



H

AUDIO button (in BT mode)


Select an item.

Bluetooth ® Audio mode

 Playing Bluetooth ® Audio  Audio Screen Control


QRG

1 Audio Screen Control

The display items vary on the connected device.

The following functions may not be available on some devices:

• Pause function

• Group selection TOC

Audio control


• GROUP : Select b

or n

to select a playlist, album, genre, etc.




Index

Home

133


Adjusting the Sound

QRG

TOC

H

AUDIO button (  AUDIO MENU )  SOUND

Adjust the sound bass, treble, fader, and balance. In addition, you can set Speedsensitive Volume Compensation (SVC).

1.

Select the tab to adjust the desired sound mode.

2.

Adjust the desired level.


1 Adjusting the Sound

Fader adjusts the front-to-back strength, while balance adjusts the side-to-side strength.

The SVC has four modes: Off , Low , Mid , and

High . SVC adjusts the volume level based on the vehicle speed. The faster you go, the audio volume increases. As you slow down, the audio volume decreases. If you feel the sound is too loud, choose Low , and vice versa.

Index

Home

134


Audio Remote Controls

Steering Wheel Controls

Control basic audio system functions using the controls mounted on the steering wheel.

CH (Channel) button MODE button


1 SOURCE Button

DISC mode appears only when a disc is loaded.

When in AUX mode, the following are operable from the remote audio controls:

• iPod®/USB flash drive connected to the USB adapter cable

• Bluetooth ® Audio (not all phones support this function)

QRG

TOC

VOL (Volume) button

■

MODE Button

Cycles through the audio modes as follows:

FM1 FM2

AUX DISC

AM

Index

Home

135


QRG

 Audio Remote Controls  Steering Wheel Controls

TOC

■

VOL (Volume) Button

Adjusts the volume.

• Press the

R

(Volume) button to increase the volume.

• Press the

U

(Volume) button to decrease the volume.

■

CH (Channel) Button

FM/AM

• Press the

N

(Channel) button to select the next preset station (channel).

• Press the

B

(Channel) button to select the previous preset station (channel).

• Press and hold the

N

or

B

button to skip to the next or previous station

(channel) in the frequency.

DISC, iPod®, USB, or Bluetooth ® Audio

• Press the

N

button to skip to the next track.

• Press the

B

button to skip to the beginning of the current track. Press the

B button again to go to the beginning of the previous track.

• Press and hold the

N

or

B

button to skip up or down a folder (DISC/USB).

Index

Home

136





QRG

This section describes how to operate Bluetooth ® HandsFreeLink®. You can place and receive phone calls using your vehicle’s audio system without handling your cell phone.

Bluetooth ® HandsFreeLink® ...............

1 38

Pairing a Phone ....................................

140

Setting Up Speed Dialing......................

145

Editing Phone Information....................

148

Phone Setup ........................................

149

Making a Call.......................................

150

Receiving a Call ....................................

153

HFL Menus ...........................................

154

Index

Home

137

QRG


Bluetooth ® HandsFreeLink®

H

PHONE button

Select an item.

TOC

Index

Home

138


• Redial : Dials the last number.

• Call History : Displays the call history.

2 Using Call History P. 152

• Phonebook : Displays the cell phone’s imported phonebook.

2 Using the Phonebook P. 151

• Dial : Makes a call by entering the phone number.

2 Entering a Phone Number P. 151

• Phone Setup : Sets up the HFL features.


• Speed Dial 1, 2 : Makes a call to stored speed dial entries.

2 Using Speed Dial P. 152



1 Bluetooth ® HandsFreeLink®

You can control the HFL system using voice commands.

2 HFL Menus P. 154

To use HFL, you need a Bluetooth -compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities:

• U .

S .: Visit automobiles.honda.com/ handsfreelink .

• Canada : Visit www.handsfreelink

.ca.

• Call HandsFreeLink customer support at

(888) 528-7876.

Voice Control Tips

• Aim the vents away from the ceiling and close the windows, as noise coming from them may interfere with the microphone.

• Press and release the d

(Talk) button before giving a command. Speak clearly and naturally after a beep.

2 Voice Control Operation P. 5

• If the microphone picks up voices other than yours, the command may be misinterpreted.

• To change the volume level, use the audio system’s volume knob or the remote audio controls.


■

Help Features

Say d

“Hands-free help” or d

“Help” any time to get help or hear a list of commands.

2 Voice Help P. 13

 Bluetooth ® HandsFreeLink® 


QRG

1 Bluetooth ® HandsFreeLink®

Bluetooth ® Wireless Technology

Bluetooth ® name and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co.,

Ltd., is under license. Other trademarks and trade names are those of their respective owners.

HFL Limitations

An incoming call on HFL will interrupt

Bluetooth ® Audio when it is playing. Audio will resume when the call is ended.

Certain touchscreen functions are disabled while the vehicle is moving.

2 Limitations for Manual Operation P. 19

TOC

Index

Home

139


QRG

TOC

 Bluetooth ® HandsFreeLink®  Pairing a Phone

Pairing a Phone

H

PHONE button

When no Bluetooth -compatible phone has ever been paired to the system, the following screen appears:

1.

Select Yes .

2.

Put your cell phone in “Discovery” or “Search” mode.

3.

Select OK .



The system begins to search for your phone.

4.

Select your phone in the list.

 Select Find Another Phone if your phone is not found.



Refer to your phone manual for instructions on searching for a

Bluetooth ® device.

5.

Enter the 4-digit pairing code on your phone when prompted to complete the pairing process.


1 Pairing a Phone

Your Bluetooth -compatible phone must be paired to HFL before you can make and receive hands-free calls.

The maximum range between your phone and vehicle is about 30 feet (10 meters).

Phone Pairing Tips

• You cannot pair your phone while the vehicle is moving.

• Your phone must be in discovery or search mode when pairing the phone. Refer to your phone’s manual.

• Up to six phones can be paired.

• Your phone’s battery may drain faster when it is paired to HFL.

• If your phone is not ready for pairing or not found by the system within three minutes, the system will time out and returns to idle.

• The default pairing code “0000” is used unless you change the setting.

Pairing Code

You can change the pairing code setting.

2 Changing the Pairing Code P. 142

Delete a Phone

You can delete the paired phone.


Index

Home

140


■

Pairing from Phone Setup

H

PHONE button  Phone Setup

Use the Phone setup screen to pair an additional Bluetooth -compatible phone if a phone has been previously paired to the system.

1.

Select Add/Select a Phone under

Bluetooth setup .

2.

Select Search .



QRG

1 Pairing from Phone Setup


2 HFL Menus P. 154

If a prompt appears asking to connect to a phone, select No and proceed with step 1.

TOC

3.

Put your cell phone in “Discovery” or “Search” mode.

4.

Select OK .



The system begins to search for your phone.

5.

Select your phone in the list.



Select Find Another Phone if your phone is not found.

 Refer to your phone manual for instructions on searching for a

Bluetooth ® device.

6.

Enter the 4-digit pairing code on your phone when prompted to complete the pairing process.

Index

Home

141


QRG


■

Changing the Pairing Code

H

PHONE button  Phone Setup  Add/Select a phone

1.

Select Edit under Pairing Code .

TOC

2.

Select an item.

Index

Home

142


• Random : Uses a randomly generated pairing code.

• Fixed : Create your own pairing code.



3.

If you select Fixed , enter a new pairing code. Select OK .

 Select Delete to remove the current pairing code.



QRG

■

Deleting a Paired Phone

H


1.

Select List under Paired Phone

List .

2.

Select a phone to delete.



The Bluetooth ® icon indicates the currently linked phone.

1 Deleting a Paired Phone

When you transfer the vehicle to a third party, delete all paired phones.

TOC

Continued

Index

Home

143


QRG


Bluetooth ® icon

3.

Select Delete this Phone .

4.

Select Yes .


TOC

■

Changing the Currently Paired Phone

H


1.

Select List under Paired Phone

List .

2.

Select a phone to connect.

3.

Select Connect .



HFL disconnects the linked phone and starts connecting to another paired phone.

1 Changing the Currently Paired Phone

If no other phones are found or paired when trying to switch to another phone, HFL will inform you that the original phone is linked again.

Index

Home

144


Setting Up Speed Dialing

H

PHONE button



Speed Dial 1 or Speed Dial 2

Create speed dial entries with voice tags for easy calling.

1.

Select Add New .

2.

Select a number entry option.

3.

Select a number.

4.

Select Voice Tag .

 Select OK to store the speed dial without a voice tag.

5.

Follow the prompt to enter a voice tag.


• Phonebook: Adds a number from the imported phonebook.

• History: Adds a number from the last 20 numbers.

• Phone Number: Enters a number manually.

 Bluetooth ® HandsFreeLink®  Setting Up Speed Dialing


QRG

1 Setting Up Speed Dialing


2 HFL Menus P. 154

Up to 15 speed dial entries can be stored per phone.

TOC

Index

Home

145


QRG

TOC



■

Registering a Voice Tag to a Speed Dial Entry

H

PHONE button  Speed Dial 1 or Speed Dial 2

1.

Select a speed dial entry.

2.

Select Edit Speed Dial .

3.

Select Voice Tag .

4.

Follow the prompt to enter a voice tag.

1 Registering a Voice Tag to a Speed Dial Entry

Voice tags allow you to call speed dial entries from any screen by saying d “Dial by voice tag” and the voice tag, followed by d

“ Dial .”

• Avoid using duplicate voice tags.

• Avoid using “Home” as a voice tag.

• Avoid using voice tags that only contain numbers.

• It is easier for HFL to recognize a longer name

(e.g., “John Smith” instead of “John”).

1 Deleting a Speed Dial Entry

1.

Select Delete Speed Dial .

2.

Select Yes .

Index

Home

146


■

Editing a Voice Tag

H


1.


2.

Select Edit Speed Dial .

3.

Select Voice Tag

.



QRG

TOC

4.

Select an item.


• Play Stored Voice Tag : Plays the stored voice tag.

• Record Voice Tag : Stores a voice tag. Follow the prompt to enter a voice tag.

• Delete Voice Tag : Deletes the stored voice tag. Select Yes .

Index

Home

147


QRG

 Bluetooth ® HandsFreeLink®  Editing Phone Information

Editing Phone Information

H

PHONE button



Phone Setup



Add/Select a phone



List

Edit the user name of a paired phone, and protect the phonebook and speed dial entries with a PIN.

1.

Select a phone to edit.


1 Editing Phone Information


2 HFL Menus P. 154

You can name up to six HFL users. Each can be

PIN protected, and have their own phonebook, speed dial entries, and call history.

TOC

2.

Select an item.


• Connect : Connects the selected phone to the HFL.

• Edit Name: Enter a name.

Index

Home

148

• PIN: Enter a 4-digit PIN. Re-enter to confirm. You can select Do Not Use PIN to remove a PIN.

• Replace this Phone : Deletes the selected phone and adds a new phone.


• Delete this Phone: Deletes the user name, call history, and phonebook.


Phone Setup

H

PHONE button



Phone Setup

Set HFL options and features.

1.

Select an item.

2.

Select OK .


• Bluetooth Setup : Pairs your phone to the system.


• Bluetooth Connection : Turns the Bluetooth ® connection on or off.

On : Connects your Bluetooth-compatible device to the system.

Off (factory default): Disables the feature.

• Auto Transfer : Sets whether to automatically transfer a call from your phone to

HFL when you enter and turn on the vehicle.

On (factory default): Automatically transfers your call to HFL.


• Auto Answer : Sets whether to automatically answer an incoming call.

On : Automatically connects an incoming call after about five seconds.

Off (factory default): Disables the feature.

• Volume : Select

B

or

N

to adjust the receiver and ring volume. If you change the volume during a call, it is maintained at that level until you change it again.

 Bluetooth ® HandsFreeLink®  Phone Setup


QRG

1 Phone Setup


2 HFL Menus P. 154

TOC

Index

Home

149


QRG

 Bluetooth ® HandsFreeLink®  Making a Call

Making a Call

Make calls by entering a number or using the imported phonebook, call history, or speed dial entries.





TOC


1 Making a Call


2 HFL Menus P. 154

When you say d

“Call by number” or d

“Dial by voice tag” on most screens, the following screen appears:

Say the phone number or the voice tag (e.g., d

“John Smith” ), followed by d “Dial.”

2 Registering a Voice Tag to a Speed Dial

Entry P. 146

Only one phone can be used with HFL at a time.

When there are more than two paired phones in the vehicle, the first paired phone the system finds is automatically linked.

Index

Home

150


■

H

PHONE button  Phonebook

■

Using the Phonebook

Entering a Phone Number

H

PHONE button



Dial

1.

Select a name.

 Select alphabetical tabs to display the entries in the group.

2.

Select a number.

3.

Select Call to begin dialing.

1.

Enter a phone number.

2.

Select Dial to begin dialing.



QRG

1 Using the Phonebook

Up to three icons are displayed for each phonebook entry. If there are more than three numbers for an entry, “…” is displayed.

Home Fax

Mobile Car phone

TOC

Other Voice

Work Preference

Pager

This feature is not available on all phones.

1 Entering a Phone Number

A command that consists of several numbers can be spoken together.

For example, say d

“123- 456-7890” at once.

Index

Home

151


QRG


■

Using Call History

H

PHONE button  Call History

1.

Select a call.

 Select All , Dialed , Received ,

Missed to view the call history by category.

2.



1 Using Call History

The call history shows the last 20 calls from your phone.

TOC

■

Using Speed Dial

H


1.


2.


1 Using Speed Dial

To make a call using speed dial, you need to create speed dial entries.


More Speed Dial Lists

You can make a call by using more speed dials on the other phones.

1.

Select another paired phone in the list.

2.


3.


If the other phone is PIN-protected, enter the PIN when prompted. Select OK . PINs are optional.

2 Editing Phone Information P. 148

Index

Home

152


Receiving a Call

Call ID Bluetooth indicator Roaming status

1.

Press the h

(Pick-Up) button to answer a call and display the

Calling screen.

Signal strength Battery level

2.

Press the j

(Hang-Up) button to terminate the call.

 Bluetooth ® HandsFreeLink®  Receiving a Call


QRG

1 Receiving a Call

An incoming call notification appears on the navigation screen, and you hear an audible ring tone.

If your phone has Call Waiting, press the h button to put the original call on hold and answer the incoming call. To return to the original call, press the h

button again. If you want to hang up the original call and answer the new call, press the j

button.

To change the volume level of HFL, use the audio system volume knob or the steering wheel volume controls.

Some phones may send battery, signal strength, and roaming status information to the screen.

Phonebook

Displays the cell phone’s imported phonebook.


TOC

The following options are available during a call:

• MUTE : Allows you to mute your voice.

• Touch Tones (available on some phones): Allows you to send numbers or names during a call. This is useful when you call an automated phone system.

• Transfer Call : Allows you to transfer a call from HFL to your phone, or from your phone to HFL.

Index

Home

153


QRG

 Bluetooth ® HandsFreeLink®  HFL Menus

HFL Menus

Use HFL when the vehicle’s ignition is in the ACCESSORY (I) or ON (II) position.

You can operate HFL by voice when on the PHONE screen. Below is the flow chart showing available voice commands.

Press the h

(Pick-Up) button to display the PHONE screen.

Press the d

(Talk) button each time you give a voice command.

“Phone Setup”

TOC


1 HFL Menus

To use HFL, you must first pair your Bluetooth compatible cell phone to the system while the vehicle is parked.

Index

Home

154

“Bluetooth Setup Add/Select a phone”

“Paired Phone List”

Display the list of the paired phones.

Sele c t a phone “Connect”

Switch from a currently linked phone to another paired

phone. 2 Changing the Currently Paired Phone P. 144

“Edit Name” Create a user name for a paired phone.

“Add a New Phone”

“Pairin g Code”

“PIN”

Create a PIN for a paired phone.

“Replace this Phone”

“Delete this Phone”

Replace the previously paired phone with a new phone.

Delete a previously paired phone.


Pair your phone to the system. 2 Pairing a Phone P. 140

Set a “fixed” or “random” pass-key code for phone pairing.

2 Changing the Pairing Code P. 142




QRG

Press the h

(Pick-Up) button to display the PHONE screen.

Press the d


“Phone Setup”

“Bluetooth

Connection On/Off”

2 Phone Setup P. 149

Turn the Bluetooth connection on or off.

“Auto Transfer On/Off” Turn the auto transfer on or off.

“Auto Answer On/Off” Turn the auto answer on or off.

“Redial”

“Call History”

“Phonebook”

“Dial”

“Volume Plus/Minus”

Dial the last phone number.

Adjust the HFL volume.

Display the last 20 incoming, outgoing, or missed calls.


Display the paired phone’s imported phonebook (or import a new one).


Say a phone number to dial.


“Dial”

“Touch Tones” Send numbers or names during a call.

“MUTE”

“Transfer Call”

Mute your voice during a call.

Transfer a call from HFL to your phone, or from your phone to HFL.

TOC

Index

Continued

Home

155


QRG



Press the h

(Pick-Up) button to display the Cellular Phone screen.

Press the d


“Speed Dial 1” or

“Speed Dial 2”


“More Speed Dial

Lists”

Make a call by using another paired phone’s speed dial list.

(Speed Dial 2 only)


Sele c t an entr y

TOC

“Call” Dial the phone number of the selected speed dial entry.

“Edit Speed Dial”


“Edit Phone

Number”

Edit the phone number of the selected speed dial entry.

“Voice Tag”

Create a voice tag for a speed dial number.

2 Registering a Voice Tag to a Speed Dial Entry P. 146

“Delete Speed Dial” Delete a previously stored speed dial number.

Index

Home

156



Other Features

QRG

This section describes the useful functions incorporated into the navigation system.

Information Functions .......................... 158

System/Device Information ...................

158

Map Update.........................................

158

Index

Home

157


QRG

Information Functions

System/Device Information

H

INFO button



System/Device Information

View database, software, device, and vehicle identification information.


1 System/Device Information

You will need this information when ordering a map update.

2 Obtaining Navigation Update Data P. 177

TOC

Map Update

H

INFO button  Map Update

Update the map database.

1 Map Update

When you order a map update, it is mailed to you on a USB flash drive.

2 Obtaining Navigation Update Data P. 177

Index

Home

158



Troubleshooting

QRG

Troubleshooting ................................... 160

Map, Voice, Entering Destinations ........

160

Guidance, Routing ...............................

162

Update, Coverage, Map Errors .............

164

Display, Accessories..............................

164

Miscellaneous Questions ......................

165

Error Messages ...................................... 166

Navigation System................................

166

Disc Player............................................

167

iPod® ..................................................

168

USB Flash Drive ....................................

169

Index

Home

159


QRG

TOC

Index

Home

160

Troubleshooting

Map, Voice, Entering Destinations


The Startup Confirmation screen is displayed every time I start the car.

Problem

The navigation system reboots by itself (returns to the opening screen).

How do I specify a destination when an entered city or street could not be found?

Why do some letters become grayed out when I enter an address?

How do I delete Personal Addresses, Previous

Destinations, or the Home Address?

I cannot hear the navigation system voice.

The voice control system is having difficulty recognizing my voice commands.

The navigation system pronunciation of street names in the guidance command or destination address sounds strange.

Solution

This is normal. The Startup Confirmation screen reminds you and your guest drivers to always operate the navigation system in a safe manner. If you do not select OK at startup, voice commands will not work.

A reboot can be caused by extreme temperatures or shock from bumpy roads, and does not necessarily indicate a problem. If this happens frequently, please see your dealer.

• Try entering the street first. Some cities are lumped in with a major metro area. In rural “unverified” areas or new subdivisions, streets may be missing or only partially numbered.

• Try selecting the destination directly from the map.

2 Map Input P. 75

As you enter each letter in an address or a place/landmark, the navigation system looks in the database to see what letters are possible and grays out letters that do not apply.

1.

Press the INFO button. Select Setup > Personal Information to display the types of information.

2.

Select the type of address to delete.

3.

Select Delete .

Press the INFO button. Select Setup and check that Volume is not set to Off .


• Check that the vents are not blowing air onto the microphone on the ceiling, the vehicle is as quiet as possible, and you are using the correct command when speaking.

2 Voice Recognition P. 21

• Say d

“Help” on any screen to see a list of the applicable voice commands.

The basic guidance phrases use a studio-recorded voice, but street names are pronounced using a machine-generated voice. Consequently, the name may be mispronounced or sound strange at times.


 Troubleshooting  Map, Voice, Entering Destinations


QRG

Problem

I cannot give voice commands.

I cannot select an option on the touch screen.

The screen is bright when I drive at night.

The screen is dark when I drive during the day.

Solution

Make sure you selected “OK” at the Startup Confirmation screen.

2 Start-up P. 18

To prevent driver distraction, certain touch screen functions and features are limited or inoperable while the vehicle is moving. Use voice commands, or pull over to proceed.

1.

Check that the nighttime dashboard brightness control is not set to maximum.

2.

Press the INFO button. Select Setup > Other > Color > Map . Set the Night color to

Black for the best contrast.

2 Switching Display Mode Manually P. 27

Press the INFO button. Select Setup > Other > Color > Map . Set the Day color to

White for the best contrast.

2 Switching Display Mode Manually P. 27

How do I change or remove my PIN?

1.

Press the INFO button. Select Setup > Personal Information > PIN Number > GO

Home 1 PIN or GO Home 2 PIN or Address Book PIN .

2.

Enter your existing PIN. You then have the choice to change or remove the PIN.

2 PIN Numbers P. 37

I have forgotten my PIN. How do I reset the PIN for

Home or the PIN for personal addresses (User 1 or User

2)?

Your dealer must reset the PIN for you.

Why is Call grayed out on the Calculate Route screen? Your phone is not paired to Bluetooth ® HandsFreeLink® or, if paired, your phone is in use.

TOC

Index

Home

161


QRG

TOC

Index

Home

162

 Troubleshooting  Guidance, Routing

Guidance, Routing


Problem

The navigation system does not route me the same way I would go or the same way as other mapping systems.

The street I’m on is not shown on the map screen.

The vehicle position icon is not following the road and the “GPS icon” text in the upper left hand corner of the screen is white or missing.

Solution

The navigation system attempts to generate the optimal route. You can change the route preferences used when calculating a route.


The mapping database is constantly undergoing revision. You can access the most recent information on the internet.

2 Map Coverage P. 177

• Check that the GPS antenna (located in the dashboard) is not blocked. For best reception, remove items from the dashboard, such as radar detectors, cell phones, or loose articles.

• Metallic tinting or other aftermarket devices can interfere with the GPS reception.

Please consult your dealer.

2 GPS System P. 174

The blue highlighted route and voice guidance stopped or turned into a blue/pink dashed line before I got to my destination.

Your route has entered an unverified area.


How do I stop the map from rotating as I drive along?

Select the map orientation icon on the map screen, or say d

“Display north-up” to change the map orientation.

Sometimes, I cannot select between the North-up and

Heading-up map orientations.

The “time to destination” display sometimes increases even though I am getting closer to my destination.

The vehicle position icon on the map “lags” a short distance behind, especially when I arrive at an intersection.

The Heading-up map orientation can only be shown in the lower scales (1/20 - 1 mile scales).

2 Map Scale and Functions P. 95

If your speed reduces due to slower traffic, the navigation system updates the “time to destination” based on your actual road speed to give you a better estimate of arrival time.

This is normal. The navigation system is unaware of the width of intersections. Large differences in vehicle position can indicate a temporary loss of the GPS signal.

2 GPS System P. 174


 Troubleshooting  Guidance, Routing


QRG

Problem

The screen is showing white dots as I drive along.

How do I remove the white dots (“breadcrumbs”) from my screen?

A road that I selected to avoid is being used when routing.

Solution

These dots are called “breadcrumbs.” These are displayed if Off-road Tracking is set to On and you drive more than 1/2 mile off mapped roads.


Press the INFO button. Select Setup > Other > Vehicle , and set Off-road Tracking to Off , then return to the map.


When you “draw” your area to avoid, make sure to select sections of roads that include at least one intersection.


This is normal. The elevation can vary ±100 feet due to GPS calculation errors.

2 GPS System P. 174

My elevation (shown when I display the current position) seems to fluctuate even though my elevation has not changed.

My elevation is missing on the “current position” screen.

The elevation is only displayed if the GPS antenna can receive signals from at least four satellites. Try moving the vehicle into an open area. The elevation is also not displayed if the calculated elevation is zero or below sea level.

TOC

Index

Home

163


QRG

TOC

 Troubleshooting  Update, Coverage, Map Errors

Update, Coverage, Map Errors


Problem

My city is not part of a fully verified detailed coverage area.

Does the navigation system work outside North

America?

Can I play video DVDs in my navigation system?

How do I report errors I find in the database?

Solution

The mapping database is constantly undergoing revision. You can access the most recent information on the internet.


The navigation system contains maps for the 50 U.S. states, Canada, and Puerto Rico.

The navigation system will not work in Mexico or other countries.


No. The navigation system is designed only to read music discs. If you experience any problems that you cannot resolve, please contact your dealer.

Minor errors are bound to occur in a large database. If you encounter major errors, see

2 Reporting Errors P. 176

Display, Accessories

Problem

The display appears dim when starting the car in really cold weather.

Solution

This is normal. The display will become brighter after a few minutes.

Index

Home

164


 Troubleshooting  Miscellaneous Questions


Miscellaneous Questions

Problem

My clock frequently changes forward and backward by one hour.

The clock changes even when I am not driving near a time zone boundary.

My state does not observe daylight saving time. How do I turn off this feature?

Solution

The clock setting is automatically updated based on your GPS location. If you live and work on the boundary between two time zones, you can turn off this feature.


The time zone boundaries are only approximated in the navigation system. Depending on the geography of the time zone boundary, the switch to a different zone can be erratic.


Press the INFO button. Select Setup > Other > Clock Adjustment > Clock

Adjustment , and set Auto Daylight to Off .


The automatic daylight saving time feature does not work in regions where the daylight saving time system has not been adopted.

Daylight saving time has started, but the navigation system did not change time even though Auto

Daylight is set to ON.

The navigation system automatic daylight feature is not switching the navigation system clock on the correct dates.

The navigation system clock switched by one hour for no apparent reason.

My battery was disconnected or went dead, and the navigation system is asking for a code.

How do I change the interface language?

Press the INFO button. Select Setup > Other > Clock Adjustment > Clock

Adjustment , and set Auto Daylight to On . Note that the automatic daylight feature does not work in regions where the daylight saving time system has not been adopted.


You may be driving near a time zone boundary.


Your vehicle comes with a label in the Owner’s Manual kit that includes the system’s security code and serial number. You should keep this label in a safe place outside your vehicle. If you cannot find it, contact your dealer.

Press the INFO button. Select Setup > Other > Language , and set the language to

English , Français , or Español .

QRG

TOC

Index

Home

165


QRG

Error Messages

Navigation System


Error Message

The display temperature is too high! For protection, the display will shut down.

Solution

This message appears briefly when the display temperature is too high. The navigation system turns off until the display cools down. The system turns back on automatically when the display cools down.

The navigation system is unable to start due to excessive heat. The system will start after the system cools.

Destination is not in this database version. Please set from map.

No POI found...

The navigation system has difficulty accessing to the map database when the temperature is high. The navigation system starts up automatically when the display cools down.

Route has not been completed. Please try again from a different location.

This message appears when you are on a route to or from a new area that is not in the database. Try planning a different route to or from a different location. If the error persists or is shown for a wide area, see your dealer.

The destination was not found in the database. Try another destination nearby, or select the destination from the map using the joystick. If the error persists or is shown for a wide area, see your dealer.

TOC

Index

Home

166


Disc Player

Error Message

Bad Disc

Please Check Owners Manual

Mecha Error

Check Disc

Unsupported

Unplayable File

Heat Error

 Error Messages  Disc Player


QRG

Servo error

Mechanical error

Mechanical error

Focus error

Disc violates copyright

Disc not supported

Load error

Cause

Appears when an unsupported disc is inserted.

Appears when the tracks on the disc are DRM or an unsupported format.

The system cannot read the track(s).

High temperature

Solution

• Press the

E

(Eject) button and remove the disc, and check that the error message is cleared.

• Check that the disc is not damaged or deformed, and insert the disc again.

2 Recommended Discs P. 122

• If the error message reappears, press the

E

button, and pull out the disc.

• Insert a different disc. If the new disc plays, there is a problem with the first disc.

• If the error message repeats, or the disc cannot be removed, contact your dealer. Do not try to force the disc out of the player.

• If it appears when a supported disc is inserted, reinsert the disc.

• This error message appears for about three seconds, then plays the next song.

• Check the tracks on the disc. There is a possibility that the tracks have been damaged.

• Turn the audio system off and allow the player to cool down until the error message is cleared.

TOC

Index

Home

167


QRG

TOC

 Error Messages  iPod®

iPod®

Error Message

Unsupported

Connect Retry

No Data

Bad Use Device


USB Error


Cause

Appears when an unsupported iPod® is connected.

Solution

• Update the iPod® software to the latest version.

• If it appears when a supported iPod® is connected, reconnect the iPod®.

Appears when the iPod® cannot be authenticated.

Reconnect the iPod®.

Appears when there are no tracks in the iPod®.

Store tracks in the iPod®.

Appears when the overcurrent protection feature of the system stops supplying power to USB because an incompatible iPod® is connected.

Appears when the internal USB error occurs.

Disconnect the iPod®. Turn the audio system off, and turn it on again.

Do not reconnect the iPod® that caused the error.

Try a different iPod®.

Index

Home

168


USB Flash Drive

Error Message

Unsupported

Unplayable File

No Data

Bad Use Device


USB Error

 Error Messages  USB Flash Drive


QRG

Cause

Appears when an unsupported device is connected.

Appears when the tracks in the

USB flash drive are DRM or an unsupported format.

The system cannot read the track(s).

Solution

If it appears when a supported device is connected, reconnect the device.

This error message appears for about three seconds, then plays the next song.

Check the tracks in the USB flash drive. There is a possibility that the tracks have been damaged.

Appears when the USB flash drive is empty or there are no tracks in

MP3, WMA, or AAC format in the drive.

Save tracks in MP3, WMA, or AAC format in the USB flash drive.

Appears when the overcurrent protection feature of the system stops supplying power to USB because an incompatible device is connected.

Appears when the Internal USB

ROM error occurs.

Disconnect the device. Turn the audio system off, and turn it on again.

Do not reconnect the device that caused the error.

Try a different USB flash drive.

TOC

Index

Home

169

QRG



Index

Home

170



Reference Information

QRG

System Initialization ..............................172

Entering the Security Code....................

172

Acquiring GPS Information....................

172

Startup Confirmation Screen .................

173

Map Matching ......................................

173

System Limitations ................................174

GPS System...........................................

174

Address Calculation ..............................

174

Database ..............................................

174

Customer Assistance .............................

176

Resolving Problems ...............................

176

Reporting Errors ....................................

176

Honda Automobile Customer Service

Contact Information ............................

176

Visiting Your Dealer .............................

176

Map Coverage .....................................

177

Obtaining Navigation Update Data .......

177

Operation in Alaska, Hawaii, Canada, and

Puerto Rico.........................................

178

Legal Information ................................. 179

END-USER TERMS ................................

179

As required by the FCC ........................

181

Index

Home

171


QRG

TOC

System Initialization


The navigation system must be initialized if power to the navigation system is interrupted for any reason (e.g., the battery was disconnected).

Entering the Security Code

Find the navigation system’s security code and serial number label in your Owner’s

Manual kit. Do not store the label in your vehicle. If you lose the label, you must first retrieve the serial number, and then obtain the code. You can find out about your serial number and security code from a dealer.

1.

Turn the ignition switch to ON (II), and turn on the audio system.

 If you turn the ignition switch to

ACCESSORY (I), and you will requested to enter the security code.

See step 2.

Acquiring GPS Information

Depending on the length of time the power was interrupted, your system may require GPS initialization.

2.

Enter the security code.

 If you do not enter the security code correctly after 10 tries, leave the system for one hour before trying again, or visit a dealer to have the system reset.

NOTE:

In the U.S., you can register the security code on Owner Link (owners.honda.com.)

.

To find information on how to retrieve the serial number and obtain the code, visit radio-navicode.honda.com

.

If initialization is not necessary, the system proceeds directly to the Startup

Confirmation screen.

If the system fails to locate a sufficient number of satellites to locate your position within 10 minutes, the following screen is displayed.

Index

Home

172


If you are experiencing GPS reception problems:

2 GPS System P. 174

Startup Confirmation

Screen

The Startup Confirmation screen is displayed when initialization has successfully completed. It is displayed every time you start your vehicle. Select OK to continue.

 System Initialization  Startup Confirmation Screen


Map Matching

Map matching is the process of using the acquired GPS information to locate your position on the map screen. If you are on a mapped road, the name of the road is displayed along the bottom of the map screen when map matching is completed.

Do not enter a destination until the road name is displayed.

The system may initially show your location on a different street (e.g., in urban areas where streets are close together), may show an incorrect elevation, or may delay the display of the vehicle position icon at intersections. This is normal; the system will correct itself while you drive.

QRG

TOC

NOTE:

“OK” cannot be selected using a voice command.

Index

Home

173


System Limitations

QRG

GPS System

TOC

Index

Home

174

The signals received from the GPS satellites are extremely weak (less than a millionth of the strength of a local FM station) and require an unobstructed view of the sky.

The GPS antenna is located in the dashboard. The signal reception can easily be interrupted or interfered with by the following:

• Metallic window tint on the front or side windows

• Cell phones, PDAs, or other electronic devices docked in a cradle or lying loose on the dashboard

• Remote starters or “hidden” vehicle tracking systems mounted near the navigation unit

• Audio electronic devices mounted near the navigation unit

• Trees, tall buildings, freeway overpasses, tunnels, or overhead electrical power wires

The GPS is operated by the U.S.

Department of Defense. For security

2013 Fit Navigation reasons, there are certain inaccuracies built into the GPS for which the navigation system must constantly compensate. This can cause occasional positioning errors of up to several hundred feet.

Address Calculation

The destination icon shows only the approximate location of a destination address. This occurs if the number of possible addresses is different from the number of actual addresses on a block. For example, the address 1425 on a 1400 block with 100 possible addresses

(because it is followed by the 1500 block) will be shown a quarter of the way down the block by the system. If there are only

25 actual addresses on the block, the actual location of address 1425 would be at the end of the block.

Database

The digitized map database reflects conditions as they existed at various points in time before production. Accordingly, your database may contain inaccurate or incomplete data or information due to the passage of time, road construction, changing conditions, or other causes.

For example, some places/landmarks may be missing when you search the database because the name was misspelled, the place was improperly categorized, or a place/landmark is not yet in the database.

This is also true for police stations, hospitals, and other public institutions. Do not rely on the navigation system if you need law enforcement or hospital services.

Always check with local information sources.


In addition, the map database contains verified and unverified areas. Unverified streets may be missing from the map, in the wrong location, or have an incorrect name or address range. A message will warn you if your route includes unverified streets. Exercise additional caution when driving in unverified areas.

The database does not include, analyze, process, consider, or reflect any of the following categories of information:

• Neighborhood quality or safety

• Population density

• Availability or proximity of law enforcement

• Emergency, rescue, medical, or other assistance

• Construction work, zones, or hazards

• Road and lane closures

• Legal restrictions (such as vehicular type, weight, load, height, and speed restrictions)

• Road slope or grade

• Bridge height, width, weight, or other limits

• Traffic facilities safety

• Special events

• Pavement characteristics or conditions

Every effort has been made to verify that the database is accurate. The number of inaccuracies you experience increases the longer you go without obtaining an updated map database.

2 Obtaining Navigation Update Data

P. 177

We assume no liability for any incident that may result from an error in the program, or from changed conditions not noted above.

 System Limitations  Database


QRG

TOC

Index

Home

175


Customer Assistance

QRG

TOC

Resolving Problems

If you run into a specific issue that you cannot resolve, consult the following help resources:

• For navigation system issues:


There are also FAQs available online at automobiles.honda.com

.

• For questions regarding Bluetooth ®

HandsFreeLink:


• For reporting issues with the database or places/landmarks:

2 Reporting Errors P. 176

• Call Honda Automobile Customer

Service.

2 Honda Automobile Customer Service

Contact Information P. 176


Reporting Errors

You can help to improve database accuracy by reporting any errors you encounter.

• Report errors in freeways and main

“verified” roads shown in black on the map at http://mapreporter.navteq.com/ dur-web-external/ .

• Please do not report errors in purple

“unverified” roads. Maps for these areas are provided for reference only.


• Please do not report errors in places/ landmarks, such as changes in business names. Information about points of interest are constantly being updated.

An updated database is available for purchase, usually in the fall of each year.

2 Obtaining Navigation Update Data

P. 177

• For vehicle position icon errors, screen error messages, or other GPS-related errors:



Honda Automobile

Customer Service Contact

Information

Honda Navi

American Honda Motor Co., Inc.

Honda Customer Service

Mail Stop 500-2N-7E

1919 Torrance Blvd.

Torrance, CA 90501-2746

Tel: (800) 999-1009

Fax: (310) 783-3273

Visiting Your Dealer

If you have a question that you cannot resolve using the available help resources, you can consult your dealer. Please identify the specific issue (e.g., error occurs when you enter a specific address, when driving on a certain road, or just when it’s cold) so that the service technician can refer the issue to the factory so that a solution can be found. Be patient, the service technician may be unfamiliar with your specific issue.

Index

Home

176


Map Coverage

The navigation system provides map coverage for the contiguous United States,

Alaska, Hawaii, Canada, and Puerto Rico.

The map coverage consists of accurately mapped (verified) metropolitan areas and a less accurate (unverified) rural database.

Note that unverified areas are constantly being reviewed and converted to verified areas each year.

Contiguous United States

Hawaii

Alaska

Puerto Rico

Canada

 Customer Assistance  Map Coverage


Map coverage update information is available from Honda Automobile

Customer Service or online at www.hondanavi.com

.

To find navigation system update information:

1.

Visit www.hondanavi.com

.

2.

Enter your vehicle model and model year.

3.

Click Map Coverage to display a list of verified coverage areas on the most recent update.

4.

Click Map Coverage Details to display a

PDF document with a full listing of all coverage areas.



Adobe® Reader® is required for viewing and printing the Portable

Document Format (PDF) documents.

To download the latest version of

Adobe Reader, visit http:// get.adobe.com/reader/ .

Obtaining Navigation

Update Data

Honda is continually expanding the scope of the navigation system. Navigation system software upgrades may be made available periodically, usually in the fall of each year.

To purchase an updated data file:

1.

Obtain your vehicle’s VIN number and the System/Device Information.

2 System/Device Information P. 158

2.

Call the Honda Navigation Disc

Fulfilment Center at (888) 291-4675, or order online at www.hondanavi.com

.

Update data is not available from your dealer. However, the dealer may assist you in obtaining an update data for you out of courtesy. There is no program for free updates.

QRG

TOC

Index

Home

177

TOC

Index

Home

178


QRG

 Customer Assistance  Operation in Alaska, Hawaii, Canada, and Puerto Rico

Operation in

Hawaii, Canada,

Puerto Rico

Alaska,

and

■

Map Coverage

All roads displayed on the map screens are verified roads. Information in this manual relating to “unverified” roads or areas is not applicable.

■

Address and Place Entry

Screens

Entering a destination address or place/ landmark on another island may result in a screen caution message. This is because there are no ferry routes between islands in the database.



Legal Information

END-USER TERMS

The data (“Data”) is provided for your personal, internal use only and not for resale. It is protected by copyright, and is subject to the following terms and conditions which are agreed to by you, on the one hand, and NAVTEQ North

America, LLC (“NT”) and its licensors

(including their licensors and suppliers) on the other hand.

© 2010 NAVTEQ. All rights reserved.

This data includes information taken with permission from Canadian authorities, including © Her Majesty the Queen in

Right of Canada, © Queen’s Printer for

Ontario, © Canada Post Corporation,

GeoBase®, © The Department of Natural

Resources Canada. All rights reserved.

NAVTEQ holds a non-exclusive license from the United States Postal Service® to publish and sell ZIP+4® information.

©United States Postal Service® 2010.

Prices are not established, controlled or approved by the United States Postal

Service®. The following trademarks and registrations are owned by the USPS:

United States Postal Service, USPS, and

ZIP+4.

QRG


■

TERMS AND CONDITIONS

Personal Use Only.

You agree to use this

Data for the solely personal, noncommercial purposes for which you were licensed, and not for service bureau, timesharing or other similar purposes.

Accordingly, but subject to the restrictions set forth in the following paragraphs, you may copy this Data only as necessary for your personal use to (i) view it, and (ii) save it, provided that you do not remove any copyright notices that appear and do not modify the Data in any way. You agree not to otherwise reproduce, copy, modify, decompile, disassemble or reverse engineer any portion of this Data, and may not transfer or distribute it in any form, for any purpose, except to the extent permitted by mandatory laws. Multi-disc sets may only be transferred or sold as a complete set as provided by you and not as a subset thereof.

Restrictions.

Except where you have been specifically licensed to do so by NT, and without limiting the preceding paragraph, you may not (a) use this Data with any products, systems, or applications installed or otherwise connected to or in communication with vehicles, capable of vehicle navigation, positioning, dispatch, real time route guidance, fleet management or similar applications; or (b) with or in communication with any positioning devices or any mobile or wireless-connected electronic or computer devices, including without limitation cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or PDAs.

Warning.

The Data may contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic data, any of which may lead to incorrect results.

No Warranty.

This Data is provided to you “as is,” and you agree to use it at your own risk. NT and its licensors (and their licensors and suppliers) make no guarantees, representations or warranties of any kind, express or implied, arising by law or otherwise, including but not limited to, content, quality, accuracy, completeness, effectiveness, reliability, fitness for a particular purpose, usefulness, use or results to be obtained from this

Data, or that the Data or server will be uninterrupted or error-free.

TOC

Index

Home

179


 Legal Information  END-USER TERMS

QRG

TOC

Index

Home

180

Disclaimer of Warranty: NT AND ITS

LICENSORS (INCLUDING THEIR LICENSORS

AND SUPPLIERS) DISCLAIM ANY

WARRANTIES, EXPRESS OR IMPLIED, OF

QUALITY, PERFORMANCE,

MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE OR NON-

INFRINGEMENT. Some States, Territories and Countries do not allow certain warranty exclusions, so to that extent the above exclusion may not apply to you.

Disclaimer of Liability: NT AND ITS

LICENSORS (INCLUDING THEIR LICENSORS

AND SUPPLIERS) SHALL NOT BE LIABLE TO

YOU: IN RESPECT OF ANY CLAIM,

DEMAND OR ACTION, IRRESPECTIVE OF

THE NATURE OF THE CAUSE OF THE

CLAIM, DEMAND OR ACTION ALLEGING

ANY LOSS, INJURY OR DAMAGES, DIRECT

OR INDIRECT, WHICH MAY RESULT FROM

THE USE OR POSSESSION OF THE

INFORMATION; OR FOR ANY LOSS OF

PROFIT, REVENUE, CONTRACTS OR

SAVINGS, OR ANY OTHER DIRECT,

INDIRECT, INCIDENTAL, SPECIAL OR

CONSEQUENTIAL DAMAGES ARISING OUT

OF YOUR USE OF OR INABILITY TO USE

THIS INFORMATION, ANY DEFECT IN THE

INFORMATION, OR THE BREACH OF THESE

TERMS OR CONDITIONS, WHETHER IN AN


ACTION IN CONTRACT OR TORT OR

BASED ON A WARRANTY, EVEN IF NT OR

ITS LICENSORS HAVE BEEN ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES.

Some States, Territories and Countries do not allow certain liability exclusions or damages limitations, so to that extent the above may not apply to you.

Export Control.

You agree not to export from anywhere any part of the Data provided to you or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export laws, rules and regulations.

Entire Agreement.

These terms and conditions constitute the entire agreement between NT (and its licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof, and supersedes in their entirety any and all written or oral agreements previously existing between us with respect to such subject matter.

Governing Law.

The above terms and conditions shall be governed by the laws of the State of Illinois, without giving effect to (i) its conflict of laws provisions, or (ii) the United Nations Convention for

Contracts for the International Sale of

Goods, which is explicitly excluded. You agree to submit to the jurisdiction of the

State of Illinois for any and all disputes, claims and actions arising from or in connection with the Data provided to you hereunder.

Government End Users.

If the Data is being acquired by or on behalf of the

United States government or any other entity seeking or applying rights similar to those customarily claimed by the United

States government, this Data is a

“commercial item” as that term is defined at 48 C.F.R. (“FAR”) 2.101, is licensed in accordance with this End User License

Agreement, and each copy of the Data delivered or otherwise furnished shall be marked and embedded as appropriate with the following “Notice of Use,” and shall be treated in accordance with such

Notice:


NOTICE OF USE

CONTRACTOR (MANUFACTURER/

SUPPLIER) NAME: NAVTEQ

CONTRACTOR (MANUFACTURER/

SUPPLIER) ADDRESS: 425 West R a ndolph

St., Chi ca go, Illinois 60606

This D a t a is a c ommer c i a l item a s defined in FAR 2.101 a nd is su bj e c t to the End

User Li c ense Agreement under whi c h this

D a t a w a s provided.

© 2010 NAVTEQ - All rights reserved.

If the Contracting Officer, federal government agency, or any federal official refuses to use the legend provided herein, the Contracting Officer, federal government agency, or any federal official must notify NAVTEQ prior to seeking additional or alternative rights in the Data.

As required by the FCC

1)This device complies with Part 15 of the

FCC Rules and Canadian RSS-210/RSS-

Gen. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2)The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by the party responsible for compliance may void the user's authority to operate the equipment.

3)This product emits radio frequency energy, but the radiated output power of this device is far below the FCC and IC radio frequency exposure limits. This equipment complies with FCC and IC RF radiation exposure limits set forth for an uncontrolled environment. Nevertheless, the device should be used in such a manner that the potential for human contact with the antenna during normal operation is minimized.

 Legal Information  As required by the FCC


QRG

TOC

Index

Home

181

QRG



Index

Home

182



Voice Commands

QRG

Voice Commands .................................. 184

Global Commands ...............................

184

Navigation Commands .........................

184

Audio Commands ................................

186

Cellular Phone Commands ...................

188

Main Setup Screen Commands ............

189

On-Screen Commands .........................

189

Spelling Assistance ...............................

189

Index

Home

183


QRG

Voice Commands

Global Commands

The system accepts these commands on any screen.

Help (displays available commands for current screen)

Display map (equivalent to MAP)

Display menu (equivalent to DEST)

Display information (equivalent to INFO)

Display audio screen (equivalent to

AUDIO)

Back (equivalent to

K

(Back))

Cancel (equivalent to CANCEL)

What is today’s date?

What time is it?


Navigation Commands

The system accepts these commands on a map/guidance screen.

■

General Commands

Display menu (if en route, displays the

Route screen)

Display navigation (if en route, displays the Route screen)

Display map

Display map guide (when en route, shows the next guidance point)

Display information (or Information)

Display audio screen

Cancel

Backward (or Back)

What time is it?

What is today’s date?

Help (reads list of General and Map

Display Commands)

■

Map Display Commands

Display current location (shows current latitude, longitude, and elevation)

Display/Hide (specify icon type):

ATM gas station restaurant post office grocery store lodging (hotel, motel) parking garage parking lot school hospital freeway exit information

Go home 1

Go home 2

Register the current location (stores current location in the Address Book)

Index

Home

184


■

Map Scale Commands

Display north up

Display heading up

Display zoom in

Display zoom out

Display (specify scale):

1/20 mile (80 m) scale




1 mile (1600 m) scale

2 mile (3 km) scale







Max zoom in

Max zoom out

■

Find Place Commands

Find nearest (specify place):

Auto service center

ACURA dealers

HONDA dealers

Gas station

Hydrogen station

Auto parts & electronics shop

Auto repair & maintenance shop

Car wash & detailing shop

Motorcycle dealers

Other car dealers

Roadside assistance

Banking center

ATM

Bank

Check cashing

Community

Business

City hall

Civic center

Convention center

Court house

Higher education

Library

Post office

School

 Voice Commands  Navigation Commands


Emergency room

Hospital

Police station

Veterinarian

Lodging

Bed & breakfast

Hotel

Leisure center

Amusement park

Golf course

Historical monument

Marina

Movie theater

Museum

Park

Performing arts

Sports complex

Tourist attraction

Restaurant

American restaurant

Californian restaurant

Chinese restaurant

Coffee shop

Continental restaurant

Fast food restaurant

French restaurant

German restaurant

Greek restaurant

QRG

Index

Continued

Home

185


QRG

 Voice Commands  Audio Commands

Index

Home

186

Ice cream shop

Indian restaurant

Italian restaurant

Japanese restaurant

Korean restaurant

Mexican restaurant

Pizza

Seafood restaurant

Thai restaurant

Vegetarian restaurant

Vietnamese restaurant

Other restaurant

Shopping area

Accessory store

Book store

Clothing store

Furniture store

Grocery store

Home improvement store

Mall

Office supply store

Pharmacy

Pet food store

Sewing store

Shoe store

Sporting goods store

Toy store

Travel center

Airport

Automobile club

Bus station

Camping

Commuter rail station

Ferry terminal

Named place

Park & ride

Parking garage

Parking lot

Rental car agency

Rest area

Ski area

Tourist information

Train station

Travel agency

Truck stop

■

Route Commands

The system accepts these commands when a route is set.

How long to the destination?

How far to the destination?

Display destination map

Display entire route


Audio Commands

The system accepts these commands on most screens.

Audio *

Audio on

Audio off

* These commands toggle the function on and off, so the command may not match your intended action.

NOTE:

Audio volume levels cannot be controlled using voice control.

■

Radio Commands

Radio *

Radio on

Radio off

Radio select FM1

Radio select FM2

Radio select AM

Radio tune to # FM (#: frequency, e.g., 95.5)

Radio tune to # AM (#: frequency, e.g., 1020)

Radio seek up

Radio seek down

Radio next station



Radio preset # (#: 1 to 6)

Radio FM preset # (#: 1 to 6)

Radio FM1 preset # (#: 1 to 6)

Radio FM2 preset # (#: 1 to 6)

Radio AM preset # (#: 1 to 6)

Radio auto select *

Radio scan *


■

Disc Commands

DISC play

DISC play track # (#: 1 to 30)

DISC skip forward

DISC skip back

DISC track random *

DISC track repeat *

DISC track scan *

DISC folder up

DISC folder down

DISC folder random *

DISC folder repeat *

DISC folder scan *

DISC normal play (cancels random, repeat, or scan play mode, resumes normal play mode)


 Voice Commands  Audio Commands


QRG

■

USB Commands

USB play

USB play track # (#: 1 to 30)

USB skip forward

USB skip back

USB track random *

USB track repeat *

USB track scan *

USB folder up

USB folder down

USB folder random *

USB folder repeat *

USB folder scan *

USB normal play (cancels random, repeat, or scan play mode, resumes normal play mode)


Index

Home

187


QRG

 Voice Commands  Cellular Phone Commands

■

iPod® Commands

iPod play iPod play track # (#: 1 to 30) iPod skip forward iPod skip back iPod track shuffle * iPod album shuffle * iPod track repeat * iPod normal play (cancels repeat or shuffle play mode, resumes normal play mode)


■

Bluetooth ® Audio Commands

Bluetooth audio play

Bluetooth audio skip forward

Bluetooth audio skip back

Bluetooth audio pause

Bluetooth audio resume

NOTE:

Bluetooth® Audio commands may not work on some phones or Bluetooth® audio devices.

■

AUX Commands

AUX play (or Auxiliary play)


Cellular Phone Commands

The system accepts these commands only on the PHONE screen.

Redial

Call History

Phonebook

Dial

Phone Setup

Phone Menu

Speed Dial 1

Speed Dial 2

More Speed Dial Lists

These commands can be made from any screen.

Dial/call by number

Dial/call by voice tag

Index

Home

188


Main Setup Screen

Commands

The system accepts these commands on the Main Setup screen.

Brightness up

Brightness down

Brightness minimum/min.

Brightness maximum/max.

Contrast up

Contrast down

Contrast minimum/min.

Contrast maximum/max.

Black level up

Black level down

Black level minimum/min.

Black level maximum/max.

Volume up

Volume down

Volume minimum/min.

Volume maximum/max.

Volume off

Guidance prompts normal

Guidance prompts maximum/max

Guidance prompts minimum/min

On-Screen Commands

The system accepts these commands on any screen. There are over 100 on-screen commands. Say what is written on the screen to activate that selection. For lists, you can say the list item number to select that item.

Next/Previous * 1

Right/Left * 1

Up/Down * 2

Return

OK (excluding Startup Confirmation screen)

Delete

*1 . To get to another tab.

*2 . While driving, you can scroll down the list up to three pages.

 Voice Commands  Main Setup Screen Commands


Spelling Assistance

The voice control system can also recognize phonetic alphabet input for numbers, letters, accented letters, punctuation marks, and symbols.

NOTE:

When selecting letters using the voice control system, a confirmation box may pop up to confirm the entry.

QRG

Index

Home

189


QRG

 Voice Commands  Spelling Assistance

■

Numbers

■

Letters

Index

Home

190

7

8

5

6

9

0

3

4

1

2

Say … Say … or Number …

One

Two

Three

Four

Five

Six

Seven

Eight

Nine

Zero

K

L

J

I

M

N

G

H

E

F

C

D

A

B

Say … Or say…

Alpha/Apple

Bravo/Boy

Charlie

Delta/Dog

Echo/Edward

Foxtrot/Frank

Golf/George

Hotel/Henry

India/Igloo

Juliet/John

Kilo/King

Lima/Larry

Mike/Mary

November/Nancy

U

V

S

T

Q

R

O

P

Y

Z

W

X

Say …


Oscar

Papa/Paul

Or say…

Quebec/Queen

Romeo/Robert

Sierra/Sam

Tango/Tom

Uniform/Uncle

Victor

Whiskey/William

X-ray

Yankee/Yellow

Zulu/Zebra


■

Accented Letters

Ü

Say … Say … or Symbol …

U umlaut



QRG

■

Symbols

Ï

Ô

Î

Ì

Ù

Û

Ê

Ë

È

É

Ä

Ç

À

Â


A grave

A circumflex

A umlaut

C cedilla

E grave

E acute

E circumflex

E umlaut

I grave

I circumflex

I umlaut

O circumflex

U grave

U circumflex .

,

`

_

@

^

*


At sign

Caret

Asterisk

Underscore

Back quote

Comma

Dot

Continued

Index

Home

191


QRG


Index

Home

192

/

~

)

(

‘

&

$

%

<

>

{

} k

“

#

-

!

;

+

:

?


Question mark

Colon

Semicolon

Plus

Hyphen

Exclamation point

Double quote

Pound

Dollar

Percent

Ampersand

Apostrophe

Open parenthesis

Close parenthesis

Tilde

Slash

Less than

Greater than

Open brace

Close brace

Enter



List of Categories


QRG

Auto Service

All Types (Auto Service)

Honda Dealers *

Acura Dealers *

Gas Station *

Car Wash & Detailing

Motorcycle Dealers

Other Car Dealers

Parking Garage/House

Hydrogen Station Parking Lot

Auto Parts & Electronics Rental Car Agency

Auto Repair & Maintenance Roadside Assistance

Banking

Lodging

All Types (Lodging) Hotel/Motel

Bed & Breakfast

Shopping

All Types (Shopping) Mall/Department Store

Accessories/Jewelry Office Supplies/Electronics

All Types (Leisure)

Amusement Park

Leisure

Museum

Auto Parts & Electronics Pet Food/Supplies

Books/Music/Video

Park/Recreation Area Clothing/Shoes/Bags

Pharmacy/Drug Store

Sewing/Linen

Golf Course Performing Arts

Historical Monument Sports Complex

Marina Tourist Attraction

Furniture/Home Furnishing Sporting Goods

Groceries/Supermarket Toys/Arts/Crafts

Home Improvement

Check Cashing/Money Transfer Movie Theater All Types (Banking)

ATM *

Bank

Community

All Types (Community)

Business

City Hall

Court House

Higher Education

Library

Civic/Community Center Post Office

Convention/Exhibition Center School

All Types (Emergency)

Hospital *

Police Station

Emergency

Roadside Assistance

Veterinarian

Restaurant

All Types (Restaurant) * Indian

American Italian

Café/Coffee Shop

Californian

Chinese

Continental

Fast Food

French

German

Greek

Ice Cream/Dessert

Japanese

Korean

Mexican

Pizza

Seafood

Thai

Vegetarian

Vietnamese

Other

All Types (Travel)

Airport

Automobile Club

Travel

Park & Ride

Parking Garage/House

Parking Lot

Bed & Breakfast

Bus Station

Camping

Rental Car Agency

Rest Area

Ski Area

Commuter Rail Station Tourist Attraction

Ferry Terminal Tourist Information

Hotel/Motel

Named Place

Train Station

Travel Agency

* Stored in “Fav. Subcategory” by factory default.

Index

Home

193


QRG

Index

Home

194

Index

Symbols

K

(Back) Button ....................................

5 ,

20

a

(Display Mode) Button ......................

27 j

(Hang-Up) Button ............................

5 ,

153

h

(Pick-Up) Button ......................

5 ,

153 ,

154

d

(Talk) Button ......................................

5 ,

20

A

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

A.SEL (Auto Select) ....................................

115

Add to Address Book ..........................

77 ,

110

Add to Dest. List ..................

77

, 104 ,

108 ,

109

Address

Editing Address Book .................................

33

Editing Avoid Area ......................................

45

Setting Destination .....................................

58

Address Book


31


63

Address Book PIN

.........................................

37

Adjust Time

...................................................

48

Advanced (Place Category)

........................

67

Audio

...........................................................

111

Basic Operation .............................................

6

Remote Control ........................................

135

Sound Setup .............................................

134

Voice Commands List ...............................

186

AUDIO Button

................................................

4

Audio Menu

Bluetooth

® Audio ....................................

133

FM/AM Radio ............................................

116

Auto Answer

..............................................

149

Auto Daylight

...............................................

47

Auto Service (Place Category)

....................

67

Auto Time Zone

..........................................

47

Auto Transfer ............................................

149

AUX

Input Jack .................................................

112

Voice Commands List ..............................

188

Avoid Streets ..............................................

100

B

Banking (Place Category)

...........................

67

Basic Settings

.........................................

24 , 25

Black Level

....................................................

22

Bluetooth Setup ........................................

149

Bluetooth Connection ..............................

149

Bluetooth ® Audio

Playing ......................................................

131


188

Bluetooth ® HandsFreeLink® ..................

137

Editing Phone Info ...................................

148

Making a Call ...........................................

150

Pairing a Phone ........................................

140

Phone Setup .............................................

149

Receiving a Call ........................................

153

Setting Speed Dials ..................................

145

Brightness

...............................................

22 , 27

C

Call

Calculate Route Screen ......................

77 , 110

Call History .................................................

152

Cancel Route

..............................................

100


Category

Editing Address Book ................................

. 33

Place Category List ...................................

193


67

CD/AUX Button

..............

6 ,

119 ,

124 ,

128 ,

131

CH (Channel) Button

.................................

136

Change Language

.......................................

18

Change Route Preference

..........................

78

Change State

................................................

59

City ................................................................

60

City Vicinity


68

Clear All Speed Dial

....................................

54

Clock Adjustment

........................................

47

Adjust Time ................................................

48

Auto Daylight .............................................

47

Auto Time Zone ..........................................

47

Clock Format ..............................................

47

Resetting ....................................................

48

Clock Format

................................................

47

Clock Type

....................................................

49

Color

..............................................................

25

Map Color ..................................................

26

Menu Color ................................................

26

Community (Place Category)

.....................

67

Connect (Phone)

........................................

148

Continue Trip

.............................................

110

Contrast

........................................................

22

Coordinate

...................................................

73

Correct Vehicle Position

.............................

52

Current Location

..........................................

98

Current Position


33


75


Index


Index

D

Day Mode

Map Color ..................................................

26

Menu Color ................................................

26

Switching Display Mode .............................

27

Delete this Phone

......................................

143

DEST Button

Changing Route .........................................

99

Entering a Destination ................................

56

DEST Menu 1

................................................

56

DEST Menu 2

................................................

56

Destination Map

..........................................

79

Detour

.........................................................

100

Dial

..............................................................

151

Directions

......................................................

88

Disc

Playing ......................................................

119


187

Display Voice Command Tips

.....................

24

F

Favorite Subcategory

..................................

69

Find Nearest...

............................................

106

FM/AM Button

.......................................

6 , 114

FM/AM Radio

Playing ......................................................

114


186

Folder List

Disc ...........................................................

121

USB Flash Drive .........................................

130

G

Go Home 1

....................................................

10

Go Home 1 PIN

.............................................

37

Go Home 2

....................................................

10

Go Home 2 PIN

.............................................

37

Guidance Menu

............................................

87

Directions ....................................................

88

Exit Info .......................................................

89

Guidance Mode ..........................................

90

Guidance Mode

............................................

90

Guidance Prompts

.......................................

23


I

Icon Option

..................................................

93

Intersection

..................................................

74

iPod®

Connecting, Disconnecting ............. 1 23 ,

127

Playing ......................................................

123


1 8 8

K

Keyboard Layout

.........................................

24

L

Language

.....................................................

29

Leisure (Place Category)

.............................

67

Lodging (Place Category)

...........................

67

E

Edit Avoid Area

...........................................

44

Edit Speed Dial

...........................................

145

Edit Waypoint Search Area

........................

46

Emergency (Place Category)

......................

67

Error Messages

...........................................

166

Disc Player ................................................

167

iPod® ........................................................

168

Navigation System ....................................

166

USB Flash Drive .........................................

169

Exit Info.

.......................................................

89

H

Heading-up

...................................................

97

Home Address 1

.....................................

10 ,

36

Home Address 2

.....................................

10 ,

36

Honda Customer Services

.........................

176

M

Map Color

....................................................

26

Map Input

Editing Avoid Area .....................................

45

Setting Destination ....................................

75

Map Legend

.............................................

7 , 94

Map Menu

...................................................

85

Map Screen

..................................................

80

Icon ..................................................

7 , 92

, 9

6

Orientation .................................................

97

Scale ...........................................................

95

Map Update

Checking Version .....................................

1 5 8

Obtaining Update Data ............................

1 7 7

Viewing Update Status ............................

1 5 8

QRG

Index

Home

195


QRG

Index

Home

196

Index


Index

MAP/GUIDE Button

..................................

8 , 90

Menu (DEST Menu 1)

..................................

56

Menu (DEST Menu 2)

..................................

56

Menu (Route)

...............................................

99

Menu Color

...................................................

26

MODE Button

............................................

.135

Music Search

iPod® ........................................................

126

Mute

............................................................

153

My Destination

Adding Waypoint .....................................

101

Editing .......................................................

105

N

Night Mode

Map Color ...................................................

26

Menu Color ................................................

26

Switching Display Mode .............................

27

North-up

.......................................................

97

O

Off-road Tracking

Driving ........................................................

83

Setting ........................................................

51

P

Pair Phone

...................................................

140

Pairing Code

...............................................

1 4 2


..................................

30

Phone


188

PHONE Button

................................................

4

Phone Setup

...............................................

138

Phonebook

Making a Call ...........................................

151

PIN Numbers

Personal Info ..............................................

37

Phone .......................................................

148

Place Category


33

Place Category List ...................................

193


67

Place Name


33

Setting Destination ..............................

65 , 68

Place Phone No.


33


72

Previous Destination

Deleting ......................................................

39


33


64

R

Radio

FM/AM .....................................................

114

Random (Pairing Code) ............................

142

RDS Search .................................................

117

Read Radio Text ........................................

118

Recalculation

.........................................

41 , 83

Repeat iPod® .......................................................

125

USB Flash Drive ........................................

130

Replace this Phone ....................................

148

Rerouting ....................................................

. 41

Reset Clock Settings ....................................

48


Reset Factory Default

..................................

53

Restaurant (Place Category)

......................

67

Route (Menu)

...............................................

99

Route Pref.

...................................................

78

Routing & Guidance ....................................

40

S

Scan

Disc ...........................................................

120

FM/AM Radio ...........................................

115

USB Flash Drive .........................................

129

Search by Keyword

......................................

68

Security PIN Code ......................................

172

SEEK/SKIP Button

...........................................

4

Shopping (Place Category)

.........................

67

Show icon on Map

......................................

92

Single Screen

................................................

90

Sort by Distance to Travel

..........................

68

Sound Setup ...............................................

134

Speed Dial

Making a Call ...........................................

152

Registering ................................................

145

Split Screen

...................................................

91

Street

.............................................................

61

System/Device Information ......................

158

T

Touch Tones ...............................................

153

Transfer Call ...............................................

153

Travel (Place Category)

...............................

67

Tune

FM/AM Radio ...........................................

115

FIT_KA-31TK6830.book 197 ページ２０１１年７月４日　月曜日　午後２時４５分

Index


Index


U

Units (mile or km)

........................................

24

Unverified Area Routing

............................

42

Update System Software

Finding Update Information .....................

177

Obtaining Update Data ............................

177

USB Flash Drive

Connecting, Disconnecting ..............

123 ,

127

Playing ......................................................

127


187

Volume

..........................................................

22

Guidance ....................................................

22

Phone ........................................................

149

W

Waypoint

Adding ......................................................

101

Deleting, Ordering ....................................

105

Z

ZOOM IN/OUT Button

.............................

4 ,

95

V

Vehicle

..........................................................

50

Correct Vehicle Position .............................

52

Off-road Tracking .......................................

51

Verbal Reminder

..........................................

25

View Area Map

............................................

44

View Routes

.................................................

78

Voice

Map Menu ..................................................

84

Voice Commands

Basic Operation ............................................

9

Help ............................................................

13


184

Voice Control System .................................

20

Voice Control Operation

Basic Operation ............................................

5

Voice Recognition Tutor

.............................

24

Voice Tag ....................................................

146

Editing ......................................................

147

Registering ................................................

146

VOL (Volume) Button

...............................

136

VOL

9

(Volume/Power) Knob

....................

6

QRG

Index

Home

197

Honda Fit 2013 Owner Manual 198 Pages

Honda Fit 2013 Owner Manual

2013 Fit Navigation Online Reference Manual

WARNING

Using the navigation system while driving can take your attention away from the road, causing a crash in which you could be seriously injured or killed.

Only operate system controls when the conditions permit you to safely do so.

2013 Fit Navigation Online Reference Manual

Contents

Overview—Functions at a Glance

Navigation

Store home addresses

Store contacts

Enter destination

Select route

Track route

Avoid certain areas

Add waypoints

Audio

AM/FM Radio

Compact Disc

iPod®

USB Flash Drive

Bluetooth ® Audio

Voice Control

Bluetooth ® HandsFreeLink®

System Controls

(Eject) Button

FM/AM Button

CD/AUX Button

AUDIO Button

SEEK/SKIP Button

Disc Slot

PHONE Button

MAP/GUIDE Button

DEST Button

INFO Button

ZOOM IN/OUT Button

CANCEL Button

Joystick/ENT Button

(Display Mode)

Button

VOL

Knob

Microphone

Voice Control Operation

MODE Button

VOL (Volume) Button

CH (Channel) Button

(Pick-Up) Button

(Hang-Up) Button

(Talk) Button

(Back) Button

Audio System

Basic Operation

Audio Control Display

Map Screen Legend

During Route Guidance

Map Screen

Guidance Screen

Day or Night Mode

How to Enter Information

Using Voice Control

Using the Touch Screen

On list screens:

On list screens:

Navigation—Home Addresses and Going Home

Storing Your Home Address Going Home

Navigation—Entering a Destination

Navigation—Changing Route or Destination

Adding a Waypoint

(“Pit Stop”)

Changing Your

Destination

Canceling Your Route

From the map screen:

Voice Help

Getting Started Tutorial

Command Help

Troubleshooting

How to Use This Manual