LG PD233.DCHNLLK Owner's manual

LG PD233.DCHNLLK Owner's manual
Owner’s manual
Please read this manual carefully before
operating your device.
The actual device may differ from the image.
MODEL : PD233/PD233P
Bluetooth®
QR Code for PocketPhoto App
ENGLISH
Bluetooth®
Safety information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK) NO USERSERVICEABLE PARTS INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle is
intended to alert the user to the presence
of uninsulated dangerous voltage within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying the
product.
2
WARNING: This product contains chemicals known
to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands after
handling.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance. To disconnect power from the mains,
pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the battery
from the equipment: Remove the old battery
or battery pack, follow the steps in reverse order
than the assembly. To prevent contamination of
the environment and bring on possible threat
to human and animal health, the old battery or
the battery put it in the appropriate container
at designated collection points. Do not dispose
of batteries or battery together with other
waste. It is recommended that you use local, free
reimbursement systems batteries and accumulators.
The battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
NOTICE: For safety making information including
product identification and supply ratings, please
refer to the main label inside the apparatus.
NOTICE: Only use the AC adaptor supplied with this
device. Do not use a power supply from another
device or another manufacturer. Using any other
power cable or power supply may cause damage to
the device and void your warranty.
3
CAUTION:
yy The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with
liquids, such as vases, should be placed on the
apparatus.
yy Minimum distance around the apparatus for
sufficient ventilation, no less than 5 cm.
yy The ventilation should not be impeded by
covering the ventilation openings with items, such
as newspapers, table-cloth, curtains etc.
yy No naked flame sources, such as lighted candles,
should be placed on the apparatus.
yy Internal lithium battery in the unit should not be
replaced by user because of danger of explosion
if battery is incorrectly replaced ,and must be
replaced with the same type battery by expert.
,,Note
Device operating temperature
When operating in cold weather, the device
shall not print. Bring it inside from the cold and
give about 10 min to adjust to the specified
operating temperature (5 °C - 40 °C). Then try
printing again. (For the appropriate use, it is
recommended not to operate it outdoors in
winter.)
>>Caution
CAUTION when using this product in
environments of low humidity
yy It may cause static electricity in
environments of low humidity.
yy It is recommended to use this product after
touching any metal object which conducts
electricity.
4
IMPORTANT SAFETY
INSTRUCTIONS
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8.
Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9.
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a
third grounding prong. The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer,
or sold with the apparatus. When
a cart is used, use caution when
moving the cart/apparatus
combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
5
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Industry Canada Statement:
This device complies with RSS-210 of the Industry
Canada Rules.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including
interference that may cause undesired operation of
the device
This class B digital apparatus complies with Canadian
ICES-003
6
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Contents
Safety information . . . . . . . . . . . . . . . . . . . . . . 2
STEP 1 Getting Started . . . . . . . . . . . . . . . . . . 8
Supplied items . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . 8
Power On / Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Installing App for iPhone . . . . . . . . . . . . . . . . 14
Setting Bluetooth of iPhone . . . . . . . . . . . . . 14
STEP 5 Printing Photo . . . . . . . . . . . . . . . . . . 15
Printing using Android phone . . . . . . . . . . . 15
Printing using iPhone . . . . . . . . . . . . . . . . . . . . 18
Notes on the printing . . . . . . . . . . . . . . . . . . 20
STEP 2 Charging Battery . . . . . . . . . . . . . . . . 9
Checking Label . . . . . . . . . . . . . . . . . . . . . . . . 21
STEP 3 Inserting Photo Paper . . . . . . . . . . . 11
Cleaning printer head using Smart Sheet 11
Paper Jam Solution . . . . . . . . . . . . . . . . . . . . . . 12
About LED Indicator . . . . . . . . . . . . . . . . . . . 22
STEP 4 Installing App . . . . . . . . . . . . . . . . . . 12
Installing App for Android phone . . . . . . . 12
App Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 24
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 23
7
STEP 1 Getting Started
Product Overview
Reset hole
Supplied items
Paper exit slot
LG Pocket Photo Printer
USB cable
Charger
Paper insert door
Micro USB port
(for recharging)
Button
(Power)
Paper insert slot
ZINK Photo Paper
8
Owner’s manual
STEP 2 Charging Battery
Power On / Off
On : Press and hold
for 4 sec.
This device uses built-in battery. Before using it,
charge the battery in full. (Refer to below)
Off : Press and hold
for 2 sec.
,,Note
button
yy When turning the device on, the
flashes for 5 sec. Then printing is available.
button) shows the
yy The LED indicator (
device condition. For more information, see
“About LED indicator” on page 22.
Battery charging time : 1.5 hours
button
Checking the charging status with
/ 100 % :
(When power-off )
yy Charging :
yy 10 % : flashes for about 3 sec.
yy 0 % : flashes for about 30 sec. and turns off.
yy LG Pocket Photo is always charged when
connected to the power supply except for being
printed.
9
Charger (AC Adapter)
yy Model : MCS-01WT
yy Manufacturer : TEN PAO INTERNATIONAL LTD.
yy Input : 100 - 240 V ~, 50 / 60 Hz
yy Output : 5 V 0 1.2 A
>>Caution
y Handle with care during charging to prevent
y
electric shock.
yy Do not place near heating appliance.
yy Do not disassemble or deform.
yy Do not give shock on.
yy Avoid too high or low temperature or
humidity.
10
,,Note
yy You can connect the device to PC using the
supplied USB cable, but charging time can
be longer.
yy The operating time on battery may vary
depending on the battery status, operational
status and environment conditions.
yy When the battery is discharged, printing is
available after charging it for more than 10
min. (Charge in full to print in a row.)
STEP 3 Inserting Photo
Paper
1. Open the Paper insert door.
Photo Paper
with White
side up
K
IN
Z
2. Unwrap the pack of the photo papers.
3. Slide Smart Sheet (Blue) and photo papers
together into the Paper insert slot. Smart Sheet
will be ejected automatically before first printing.
yy Do not insert more than 1 pack (10 Photo papers
and 1 Smart Sheet). Otherwise 2 papers may be
ejected at once or paper jam may occur.
yy Refill the device after using up the papers in.
yy Do not push the papers deeper into Paper insert
slot.
Smart Sheet
with Barcode
side down
Cleaning printer head using Smart
Sheet
Smart Sheet cleans printer head and calibrates colors
on photo. Keep the best print quality by using it
repeatedly.
11
Paper Jam Solution
,,Note
Do not pull the paper out. Turn the device off and on
again, the paper will be ejected automatically.
yy Handle with care when you touch the paper
not to get dirt on.
If this problem is not solved, please refer to
“Troubleshooting”.
yy Ensure to use the papers within its valid
date.
>>Caution
y Do not forcefully pull the paper out during
y
printing. It may result in malfunction.
yy Once unpacked, the papers may begin
to curl up after a period of time. It is
recommended to use them as soon as
possible.
yy Do not damage or bend the papers.
yy Using soiled paper may result in malfunction.
yy Using photo papers from other company
may result in malfunction or paper jam.
STEP 4 Installing App
yy Do not place inside a car or, expose to direct
sunlight or moisture.
Installing App for Android phone
yy Do not leave in a place where the
temperature or humidity is too high or low. It
may reduce the quality of the printed photo.
Search for “LG Pocket Photo”.
From Play Store (Android market)
Using QR code
Scan the QR code on the product box or the cover of
this manual.
12
Bluetooth®
Using NFC
Refer to “Printing using NFC” on page 16.
* NFC : Near Field Communication
** GPS : Global Positioning System using a satellite
See “Help” for details
App Setting
For more information about the App, touch “Help”.
Bluetooth®
Set the options in [Setting].
*
yy NFC : Prints using NFC (NFC-enabled phone only)
yy Bluetooth : Prints using Bluetooth
**
yy GPS : Saves the location where you took a photo
13
Installing App for iPhone
From App Store
Search for “LG Pocket Photo”.
Using QR code
Scan the QR code on the product box or the cover of
this manual.
Setting Bluetooth of iPhone
1. On your iPhone’s home screen, touch [Settings].
2. Touch “Bluetooth” and touch the slider to turn
Bluetooth [On].
3. To connect your Pocket Photo device to the
iPhone, turn on your device and make sure it is
discoverable mode.
4. When your iPhone found the device, touch the
name of Pocket Photo on the iphone screen.
14
See “Help” for details
For more information about the App, touch “Help”.
STEP 5 Printing Photo
Printing using Android phone
Printing using Bluetooth (
Bluetooth®
)
Preparation : Turn the device on, and start printing
with the white LED (
button) turning on.
Bluetooth®
1. Run LG Pocket Photo App on Android phone.
2. Select a photo to print, and touch [
].
3. Touch [OK], then it will start searching for
Bluetooth devices.
4. When LG Pocket Photo is paired for the first time,
[Bluetooth pairing request] appears. To start
printing, touch [Pairing] or input the PIN code ‘0000’.
yy If Smart Sheet is in the device, it will be ejected
before starting printing.
,, You can print photos directly from Android
phones or PC via Bluetooth without the App.
Choose a photo and select [Bluetooth] in [Share]
or [Menu].
15
Printing using NFC (
)
Check whether your Android phone supports NFC
first.
Bluetooth®
yy How to read NFC tag : Make smartphone get near
to NFC tag on the device.
NFC
3. Choose a photo to print and tag, then printing is
started immediately. From this time, you can run
the App and print a photo by just tagging.
Setting Pocket Photo App of Android phone
You can check remaining battery, the number of the
photos printed, device version, MAC address, and
change the setting of print mode, etc.
1. Tagging for the first time, it links to Play Store
where you can download LG Pocket Photo App.
2. Go to [Setting] in the App installed, and check
[NFC].
16
1. Run LG Pocket Photo App on Android phone.
(To check [Device information], set to [On] the
Bluetooth of smartphone.)
2. Go to [Setting].
3. Touch [Device Information].
Auto Exposure
Corrects color in the image.
(ON/OFF)
Paper Full
Prints without white space. (The
edge of the image can be cut
off.)
Image Full
Prints an image as a whole.
(White space can occur at the
edge of the paper.)
Auto Power Off
Set a time so that the device
turns itself off.
(Default is [5 min]. If you set to
[Off ], the device can be on for up
to 2.5 hours when fully charged.)
17
Printing using iPhone
Printing using Bluetooth (
)
Bluetooth®
Preparation : Turn the device
on, and start printing
with the white LED (
button) turning on.
1. Run LG Pocket Photo App on iPhone.
2. Select a photo to print, and touch [
].
3. “Do you want to print?” message will be appeared.
Touch [OK] to start printing.
yy If Bluethooth is not connected, “ Paired device
not found” message is appeared. (refer to the
Bluetooth setting for iPhone.)
yy If Smart Sheet is in the device, it will be ejected
before starting printing.
18
Setting iPhone Pocket Photo App
You can check remaining battery, the number of the
photos printed, device version, MAC address, and
change the setting of print mode, etc.
1. Run LG Pocket Photo App on iPhone.
(To check [Device information], set to [On] the
Blutooth of iPhone.)
Auto Exposure
Corrects color in the image.
(ON/OFF)
Paper Full
Prints without white space. (The
edge of the image can be cut
off.)
Image Full
Prints an image as a whole.
(White space can occur at the
edge of the paper.)
Auto Power Off
Set a time so that the device
turns itself off.
(Default is [5 min]. If you set to
[Off ], the device can be on for up
to 2.5 hours when fully charged.)
2. Go to [Setting].
3. Touch Setting options to change.
19
Notes on the printing
>>Caution
yy The color of impression can be different between
printed photo and image on smartphone’s display.
yy Do not pull paper out by force during
printing.
yy Once the battery is fully charged, you can print up
to 25 papers in a row. It depends on the battery
condition.
yy Do not open the paper insert door during
printing.
yy The Bluetooth searching and transferring may
fail depending on its environment. Check the
Bluetooth condition on your phone and try again.
yy If there are more than a LG Pocket Photo device,
check MAC address on the label to choose one
you want to use.
(Refer to “Checking Label” on page 21.)
20
yy Do not place an object at the front of the
Paper exit slot.
yy If the device is vibrated or given shock, the
quality of the printed photo may be reduced.
Checking Label
In case there are more than a LG Pocket Photo device,
check MAC address on the product label to choose
one you want to use.
3. You can find the product label.
1. Open the Paper insert door.
>>Caution
yy Be sure the device is off before opening.
Be sure the Paper insert door is opened
when you close the Upper Cover.
yy It is recommended not to open the Upper
cover as possible except for checking the
label.
2. Open the Upper cover.
yy Do not detach the black rubber pad. It may
cause malfunction.
21
About LED Indicator
The LED indicator (
condition.
button) shows the device
Error/
On
No paper, Paper
jam, Cancelled,
Opened, Low
temperature,
Unsupported file
format
Low battery/ To print, charge
On
the device.
LED color
22
Condition/
Power
Description
Waiting/
On
Waits for printing.
Device turns
itself off
if it is left unused
for a while.
Full charge/
Off
To print, turn on
the device.
Charging/
Off
To print, turn on
the device.
Printing/
On
Transferring data
via Bluetooth,
Printing
Cooling
mode/
On
After continuous
prints the device
may automatically
cool down
its internal
temperature. Wait
for a while to print
again.
Specifications
Photo size
50 mm x 76 mm (1.97 x 2.99
inches)
(Dot size : 640 x 1224)
Image file type/
size
JPEG (Baseline) / less than 10 MB
(Progressive JPEG is not
supported.)
Media paper
used
ZINKTM Photo Paper (exclusive
for LG)
Media paper
storage
environment
Temperature : 20 - 25 °C
Humidity : 40 - 55 % RH
Device
operation
environment
Temperature : 5 - 40 °C
Humidity : less than 70 % (35 °C)
(An temperature alert pops up
in the App.)
Optimum print
environment
Temperature : 15 - 32 °C
Humidity : less than 70 % (32 °C)
LED indicator
Communication
Power / Waiting / Bluetooth
transmitting / Charged /
Discharged / Error / Condition
of printer
Bluetooth 2.1 + EDR
Operation distance : about 10 m
External
connector
Micro USB port for charging
battery
Bus Power
Supply (USB)
DC 5 V 0 1.2 A
Battery life
500 mAh Li-Polymer
rechargeable battery
Maximum 25 prints when fully
charged
Power supply
500 mAh Li-Polymer
rechargeable battery
AC adapter (DC 5 V 0 1.2 A)
Image
resolution
More than 1280 x 2448 pixels
23
Dimensions (W
x D x H)
72.4 mm x 120.9 mm x 24 mm
(2.85 x 4.76 x 0.94 inches)
Net Weight
212 g (0.47 lbs)
yy Your phone may be incompatible with the device
depending on its manufacturer, environment or
(Android or iOS) operating system.
yy Design and specifications are subject to change
without prior notice.
24
Troubleshooting
Symptom
No power
Cause / Solution
The battery is discharged.
Be sure the device is
connected to charger or PC
properly when charging.
Bluetooth paring
Switch Bluetooth off and on
does not work well. again on your smartphone,
then pair with the device in
the smartphone’s settings.
Turn on the device and try
printing (pairing) again in
5 sec.
Be sure the device is on.
The paper jammed 1. Turn the device off and on
before printing.
again then paper is ejected
automatically.
The paper jammed
2. If above solution does
during printing.
not work, open the Upper
cover and arrange the
papers. Then insert them
with Smart Sheet (Blue) or
pull the paper out slowly
and gently.
The printed photo Open the Upper cover,
has lines.
arrange the papers and
No or incomplete insert them with Smart Sheet
locating at the bottom. Then
image is printed.
try printing again. (To open
the Upper cover, refer to
“Checking Label” on page 21.)
Set [Print mode] to [Image
The edge of the
image on the
Full] in the App’s setting
photo is cut off.
then the image is printed as
a whole.
White space
appears at the
edge of the paper.
Quality of printed
photo is too low.
When [Print mode] is set to
[Image Full], white space may
appears if the aspect ratio of
the paper and your image is
not the same.
When [Paper Full], the edge
of the image can be cut off or
little white space at the edge
of the paper may appear.
In case you magnify an image
using [ ] menu in the App,
the quality of the printed
photo may be reduced.
Turn off the device and insert
Smart Sheet locating at the
bottom of the papers. Then try
printing again.
Be sure the photo size is
bigger than the proper
resolution.(1280 x 2448 pixels)
25
Device does not
print.
Be sure there are papers in
the device.
It may take time to print after
Smart Sheet is ejected.
Be sure the photo file is less
than 10 MB.
Baseline JPEG format is
supported only.
Device is turned off Check [Auto Power Off ] time
automatically.
in the App’s setting.
Above solutions do Press Reset hole with a
not work.
pointed thing like mechanical
pencil to initialize.
26
Note
27
LG Customer Information Center
1-888-542-2623
1-800-243-0000
1-888-865-3026
CANADA
USA, Consumer
USA, Commercial
Register your product Online!
www.lg.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement