LG ON7 Owner's manual

LG ON7 Owner's manual

OWNER’S MANUAL

Mini Hi-Fi

Audio

Please read this manual carefully before operating your set and retain it for future reference.

MODEL

ON7

MFL71690507

2004_Rev02 www.lg.com

Copyright © 2020 LG Electronics Inc. All Rights Reserved.

1 Getting Started

1

2 Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING:

TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION:

The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.

WARNING:

Do not install this equipment in a confined space such as a book case or similar unit.

CAUTION:

Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock.

CAUTION:

This product employs a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. S hall the unit require maintenance, contact an authorized service center.

Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.

CAUTION:

Do not block any ventilation openings.

Install in accordance with the manufacturer’s instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface.

This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.

NOTICE:

For safety marking information including product identification and supply ratings, please refer to the main label on the bottom or the other surface of the product.

Getting Started 3

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.

Check the specification page of this owner’s manual to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your device, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the device, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

CAUTION:

Be careful to make sure children do not put their hands or any objects into the *speaker duct.

* speaker duct: A hole for plentiful bass sound on speaker cabinet. (enclosure)

CAUTION:

No naked flame sources, such as lighted candles, should be placed on the apparatus.

Symbols

~

0

Refers to alternating current (AC).

Refers to direct current (DC).

Refers to class II equipment.

1

!

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

1

4 Table of Contents

Table of Contents

1 Getting Started

7

7

8

10

12

7

7

2

6

Safety Information

Unique Features

Playable file Requirement

– Music file requirement

– Compatible USB Devices

– USB device requirement

Remote control

Top panel

Front panel / Rear panel

2 Connecting

14

14

AC Power Cord Connection

Optional Equipment Connection

14 – USB Connection

15 – Antenna Connection

16 – OPTICAL IN Connection

17 LG Sound Sync

3 Operating

18 Basic Operations

18 – CD/USB Operations

18 – Auto Play

19 – Selecting a folder and an MP3/WMA file

20 – Deleting a file/folder or format

21 Playback Effect

21 – AUTO DJ

21 – DJ PAD

22 Using BLUETOOTH® wireless technology

22 – Listening to music stored on the Bluetooth devices

25 Using the LG XBOOM App

25 – About “LG XBOOM” App

25 – Install “LG XBOOM” App onto Your

Bluetooth Device

26 – Activate Bluetooth with “LG XBOOM” App

27 Radio Operations

27 – Listening to the radio

27 – Improving poor FM reception

27 – Presetting the Radio Stations

27 – Deleting all the saved stations

28 Sound adjustment

28 – Setting the sound mode

28 – Setting the USER EQ

29 Advanced Operations

29 – Recording to USB

31 – JUKEBOX Playback

Table of Contents 5

32 Other Operations

32 – Turn off the sound temporarily

32 – DRC (Dynamic range control)

32 – CHILDSAFE Mode

33 – DEMO

33 – Resume stop

33 – Using your TV remote control

34 – Using Guitar

34 – Using Microphone

37 – LIGHTING

37 – Sleep Timer Setting

37 – Dimmer

38 – AUTO POWER On

38 – Auto function change

39 Setting the Clock

39 – Setting the Clock through “LG XBOOM” App

40 – Using your unit as an alarm clock

40 WIRELESS PARTY LINK Connection

4 Troubleshooting

43 Troubleshooting

43 – General

44 – NOTES to release Demo mode

5 Appendix

45

46

General specifications

Trademarks and licenses

47 Maintenance

47 – Notes on Discs

47 – Handling the Unit

3

4

1

2

5

1

6 Getting Started

Unique Features

BLUETOOTH®

Listens to music stored on your

Bluetooth

device.

Optical In

Listens to music from your optical device.

Playback effects

Listens to music with various sound and playback effects.

USB Direct Recording

Records music to your USB device.

LG XBOOM

LG XBOOM is an app designed to let you take control of some of LG’s latest audio devices. (Page

25-26 )

LG Sound Sync

Controls volume level of this unit by the remote control of your LG TV that is compatible with LG

Sound Sync.

Getting Started 7

Playable file

Requirement

Music file requirement

MP3/WMA file compatibility with this unit is limited as follows.

y

Sampling frequency: within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA)

y y

Bit rate: within 32 to 320 kbps (MP3),

40 to 192 kbps (WMA)

Maximum files: Data CD: 999 / USB: 2,000

y

Maximum folders: Data CD: 99 / USB: 200

y

File extensions: “.mp3”/ “.wma”

y y

Certain MP3/WMA files may not be played depending on the type or format of the file.

CD-ROM file format: ISO 9660/ JOLIET

y

We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system.

y

A protected file by DRM (Digital rights management) cannot be played on the unit.

y

The DTS disc is not supported.

You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players.

(Mastered/Live File System: Disc format system for

Windows Vista)

Compatible USB Devices

y

MP3 Player: Flash type MP3 player.

y

USB Flash Drive:

Devices that support USB2.0 or USB1.1.

y

The USB function of this unit does not support all

USB devices.

USB device requirement

y

Devices which require additional program installation when you have connected it to a computer, are not supported.

y

Do not extract the USB device while in operation.

y

For a large capacity USB, it may take longer than a few minute to be searched.

y

To prevent data loss, back up all data.

y

If you use a USB extension cable or USB hub, the

USB device is not recognized.

y

Using NTFS file system is not supported. (Only

FAT(16/ 32) file system is supported.)

y

This unit recognizes up to 2,000 files.

y

External HDD, Card readers, Locked devices, or hard type USB devices are not supported.

y

USB port of the unit cannot be connected to PC.

The unit cannot be used as a storage device.

y

Some USB may not work with this unit.

1

1

8 Getting Started

Remote control

• • • • • • • • • • • • • •

a

• • • • • • • • • • • • •

1

(Standby) : Turns the power on or off.

B

(Open/Close): Opens and closes the disc tray.

VOL

(Volume)

+/-

: Adjusts speaker volume.

F

(Function): Selects the function and input source.

Input source / Function

Disc

USB

Optical

LG Sound Sync (Optical)

Bluetooth

LG Sound Sync (Wireless)

Radio

Display

CD

USB1 / USB2

OPTICAL

LG OPT

BT

LG TV

FM

Chooses a preset number for a radio station.

(Page 27)

Replacement of battery

(R03

(R03)

Remove the battery cover on the rear of the remote control, and insert the battery with

4

and

5

matched correctly.

Risk of fire or explosion if the battery is replaced by an incorrect type.

-

-

Stores radio stations. (P

age 27)

Selects JUKEBOX mode. (P

age 31)

- Makes JUKEBOX list.

AUTO DJ

: Selects the AUTO DJ mode. (

Page 21)

DELETE

:

Deletes MP3/WMA files. (USB only).

(Page 20)

-

-

Deletes a song on the JUKEBOX list.

Deletes all the saved stations.

-

-

-

• • • • • • • • • • • • • •

b

• • • • • • • • • • • • •

REPEAT

: Listens to your tracks/files repeatedly or randomly.

TUNING-/+

: Selects the radio stations.

-

-

C

/

V

(Skip/Search):

Skips backward or forward.

Searches for a section within a track/file.

N

(Play/Pause):

Starts or pauses playback.

Selects stereo/mono.

Bluetooth

connection lock (BT LOCK): Select the

Bluetooth

function by pressing

F

repeatedly. And long press

N

to limit

Bluetooth

connection to only BT and LG TV.

Cancels DELETE function.

EQUALIZER

: Chooses sound impressions.

SPECIAL EQ

: Chooses special equalizer.

Getting Started 9

• • • • • • • • • • • • • •

c

• • • • • • • • • • • • •

0

to

9

numerical buttons: Selects numbered tracks, files, or preset number.

CLOCK

: Sets a clock and checks a time.

ALARM

: With the ALARM function you can turn on

CD, USB play and tuner reception at a desired time.

• • • • • • • • • • • • • •

d

• • • • • • • • • • • • •

VOICE CANCELLER

: You can reduce the vocal tones during music playback from various input sources.

SLEEP

: Sets the system to turn off automatically at a specified time.

(Dimmer: The display window will be darkened by half.)

SET

: Confirms the setting.

KEY CHANGER (

L

/

l

)

: Changes the key to suit your vocal range.

MIC

(Microphone)

ECHO

: Selects ECHO mode.

?

: This button is not available.

VOCAL EFFECTS

: Selects various vocal effects mode.

1

Stops recording.

1

10 Getting Started

Top panel

c d e b a f g h o n m l k j i a 1

(Standby)

Turns the power on or off.

b

USB REC / DEMO

- Records to USB.

- Stops recording.

- In power off status, if you press

USB REC /

DEMO

, show demo mode.

c

USB 1 Port

You can play sound files by connecting the USB device.

d

Display window

e

USB 2 Port

You can play sound files by connecting the USB device.

f

F

(Function)

Selects the function and input source.

Input source / Function

Disc

USB

Optical

LG Sound Sync (Optical)

Bluetooth

LG Sound Sync (Wireless)

Radio

Display

CD

USB1 / USB2

OPTICAL

LG OPT

BT

LG TV

FM

Getting Started 11

g

LIGHTING

Selects the lighting mode.

h

3

TWIN

Connects two units for TWIN mode in WIRELESS

PARTY LINK.

i C

/

V

(Skip/Search)

- Skips backward or forward.

- Searches for a section within a track/file.

- Selects the radio stations.

N

(Play/Pause)

- Starts or pauses playback.

- Selects stereo/mono.

-

Bluetooth

connection lock (BT LOCK):

Select the

Bluetooth

function by pressing

F

repeatedly. And long press

N

to limit

Bluetooth

connection to only BT and LG TV.

Z

(Stop)

Stops playback or cancels DELETE function.

VOL

(Volume)

-/+

Adjusts speaker volume.

MIC

(Microphone)

/ GUITAR -/+

Adjusts Microphone volume or Guitar volume.

j

(Auto Music Play)

Plays the audio currently playing by tagging the mobile (with “LG XBOOM” App) to this unit.

(Android Only)

k

VOICE CANCELLER

You can reduce the vocal tones during music playback from various input sources.

B

(Open/Close)

Opens and closes the disc tray.

l

CLUB, DRUM, USER

(DJ PAD)

Selects CLUB, DRUM or USER sound effect to mix.

(If you want to use USER, you have to register a source with “LG XBOOM” app.(Android Only))

1, 2, 3

(DJ PAD)

Press a desired sound pad.

m

MIC

(Microphone)

ECHO

Selects ECHO mode.

VOCAL EFFECTS

Selects various vocal effects mode.

KEY CHANGER (

l

/

L

)

Changes the key to suit your vocal range.

n

Remote sensor

o

SPECIAL EQ / BASS BLAST

(or

BASS BLAST+

)

- Chooses special equalizer.

- Press and hold to select BASS (or BASS+) effect directly.

SEARCH

Moves to folder or file in selection mode.

OK

Selects a folder when searching a file.

USER EQ

Selects the equalizer created by your own.

Multi jog

- Searches a folder or a file.

- Chooses special equalizer.

- Turns clockwise or counterclockwise to control the USER EQ level.

1

1

12 Getting Started

Front panel / Rear panel

a d e f g b c h a

Disc tray

b

Lighting

c

Remote sensor

>

Caution

Place the unit at a safe distance from the child’s reach. Otherwise it may result in the unit falling down and causing personal injury and/or property damage.

d

OPTICAL IN

: Connect an optical device.

e

GUITAR IN

: Connect a guitar.

f

MIC

(Microphone)

IN

: Connect a microphone.

g

ANTENNA

(FM)

h

AC IN

socket

y

>

Caution

Connect the power cord to wall outlet directly if possible. Or when you use an extension cable, it is highly recommended to use an extension cable of 110 V / 15 A or 230 V / 15 A, otherwise the unit may not operate properly because of the lack of power supply.

y

Do not overload the extension cord with excessive electrical load.

Getting Started 13

Useful functions for using the unit

Function

TV Remote On/

Off

(Page 33)

BT Lock On/Off

(Page 24)

Auto Power On

(Page 38)

Description

It allows you to control the volume of this unit by your TV remote control even by other company’s product.

Initial setting of this function was set to on.

It allows you to connect a

Bluetooth

device only on

BT (

Bluetooth

) and LG TV functions.

Initial setting of this function was set to off.

It allows the unit to turn on automatically by input signals:

Optical, LG TV or

BT (

Bluetooth )

ON

To do

OFF

ON

OFF

ON

OFF

Do this

Press and hold

[

on the remote control for

3 seconds in Optical function.

Press and hold

[

on the remote control for

3 seconds in Optical function.

Press and hold

N

for 5 seconds in BT

(

Bluetooth

) function.

Press and hold

N

for 5 seconds in BT

(

Bluetooth

) function.

Turn off the unit by pressing

1

on the unit for 5 seconds.

Turn off the unit by pressing

1

on the unit for 5 seconds.

1

2 Connecting

2

14 Connecting

AC Power Cord

Connection

1. Connect one end of the AC power cord (included) to the

AC IN

socket.

Optional Equipment

Connection

USB Connection

Connect a USB device (or MP3 player, etc.) to the

USB ports on the unit.

USB device

2. Plug the other end into the wall outlet.

,

Note

Unplug the AC power cord from the wall outlet if you do not use for an extended period of time.

,

Note

Removing the USB device from the unit:

1. Choose a different function/mode or press

Z

twice in a row.

2. Remove the USB device from the unit.

Antenna Connection

Connect the supplied FM antenna for listening to the radio.

FM antenna

,

Note

Be sure to fully extend the FM wire antenna.

Connecting 15

2

2

16 Connecting

OPTICAL IN Connection

1. Connect an optical output jack of external devices to the OPTICAL IN jack.

Optical cable

y

,

Note

Before connecting the optical cable, be sure to remove the protection plug cover if your cable has the cover.

y

You can enjoy the TV audio through the speakers of this unit. In the case of some TV models, you must select the external speaker option from the TV menu. (For details, reference your TV user manual.)

>

Caution

Make sure to properly align and connect the optical cable; improper alignment may cause damage to the jack.

Optical jack Optical cable Optical jack Optical cable

<O> <X>

TV or digital device etc.

2. Press

F

until OPTICAL function is selected.

LG Sound Sync

You can control some functions of this unit by your TV’s remote control with LG Sound Sync. It is compatible with LG TV that supports LG Sound Sync.

Make sure your TV has the LG Sound Sync logo.

Controllable function by LG TV’s remote control:

Volume up/down, mute

LG Sound Sync with wired connection

1. Connect your LG TV to the unit by using an optical cable.

2. Set up the sound output of TV to listen to the sound through this unit.

( Refer to the TV’s instruction manual for the details of LG Sound Sync.)

3. Turn on the unit by pressing

1

.

4. Press until OPTICAL function is selected.

You can see “LG OPT” on the display window if connecting normally between this unit and your

TV.

LG Sound Sync with wireless connection

1. Turn on the unit by pressing

1

.

2. Press until LG TV function is selected.

3. Set up the sound output of TV to listen to the sound through this unit:

“PAIRED” appears on the display window for about 3 seconds and then you can see “LG TV” on the display window if the TV and this unit are connected normally.

( Refer to the TV’s instruction manual for the details of LG Sound Sync.)

Connecting 17

y

,

Note

You can also use the remote control of this unit while using LG Sound Sync. If you use TV’s remote control again, the unit synchronizes with the TV. (According to TV

Specifications, the volume and mute of this unit synchronize with TV.)

y

If the connection fails, check the conditions of this unit and your TV: power, function.

y

Make sure of the condition of this unit and the connection in the cases below when using LG Sound Sync.

The unit is turned off.

Changing to a different function.

Disconnecting the wireless connection caused by interference or a distance.

Disconnecting the optical cable.

y

If you try to change the function on using the LG TV function, volume will be change according to the LG TV volume level.

y

If you turned off the unit directly by pressing

1

, LG Sound Sync will be disconnected.

To use this function again, you should reconnect the TV and the unit.

y

The volume may be increased when the TV and this unit is connected by LG Sound Sync.

Decrease the TV volume and then connect with this unit.

y

When you turn on your LG TV connected by LG Sound Sync or enter LG TV function, this unit changes the function to LG TV automatically.

y

You should set the TV Sound output manually depending on the TV version.

y

If you control TV volume when this unit and

TV are connected by LG Sound Sync, this unit may louder the volume due to synchronizing volume with TV’s.

2

3 Operating

3

18 Operating

Basic Operations

CD/USB Operations

1. Insert the disc by pressing

B

.

Or connect the USB device to the USB port.

2. Select CD or USB function by pressing

F

.

Stop

To

Playback

Press

Z

.

Press

N

.

Do this

Pause Press

N

during playback.

Searching for a section within a track/file

Press and hold

C

/

V

during playback and release it at the point you want to listen to.

Selecting a track/file directly

Press

0

to

9

numerical buttons on the remote control to go to the desired file or track directly.

y

,

Note

Repeat/Shuffle playback operates as follows.

On Display

OFF

ONE

Description

Plays songs in order, and stops the playback.

Plays a same song repeatedly.

FOLDER

Plays songs in a folder repeatedly. (Except AUDIO CD)

Plays all the songs repeatedly.

ALL

SHUFFLE

Plays all the songs once randomly, and stops the playback.

y

When you play JUKEBOX list, only ONE and

ALL are available.

y

Even after restarting the unit or switching one function to another, you can listen to music from the point where it’s last been played.

y

If you leave the disc tray open for 5 minutes, it will close automatically.

(1) By using

C

/

V

buttons:

Skipping to the next/previous track/file

Press

V

to go to the next track/ file.

Playing in less than 3 seconds, press

C

to go to the previous track/file.

Playing after 3 seconds, press

C

to go to the beginning of the track/file.

(2) By using

SEARCH

:

Rotate Multi jog or

C

/

V

and press

N

to play the track/ file.

Playing repeatedly or randomly

Press

REPEAT

on the remote control repeatedly. Refer to the note for details about the display change.

Auto Play

AUDIO/MP3/WMA CD is played automatically after disc tray is open and then closed.

Automatically switches to the CD function if disc tray is open and then closed even when there is no disc in disc tray.

Selecting a folder and an MP3/WMA file

On the unit

1. Press and rotate Multi Jog or

C

/

V

until a desired file appears. You can also search a folder if you press

SEARCH

again.

2. Press or

N

to play the selected file. When you search a folder, press

OK

to select a file in the folder, then press

OK

or

N

again. The selected file is played.

On the remote control

1. Press

W

/

S

repeatedly until a desired folder appears.

2. Select the file you want by using

C

/

V

.

3. Press to play it.

Operating 19

y

,

Note

CD / USB Folders/Files are recognized as below.

*

3

y

If there is no file in a folder, the folder will not appear.

y

Folders will be presented as the following order;

ROOT FOLDER 1 FOLDER 3

FOLDER 7 FOLDER 8 FOLDER 5

FOLDER 6

y

File will be played from

$

file No.1 to

$

file

No.14 one by one.

y

Files and folders will be presented in order recorded and may be presented differently according to the record circumstances.

*ROOT: The first screen you can see when a computer recognize the CD/USB is “ROOT”.

3

20 Operating

Deleting a file/folder or format

You can delete file, folder on your USB or format the

USB.

1. Select USB function by pressing

F

.

2. Press on the remote control repeatedly, the display changes as followings.

DEL FILE DEL DIR FORMAT

On Display

DEL FILE

DEL DIR

Description

Select the file you want to delete.

Select the folder you want to delete.

FORMAT

Select to format the USB device.

If you want to exit the current mode, press

Z

.

3. To delete file/folder or format, press and hold

DELETE

on the remote control .

y

>

Caution

Do not extract the USB device during operation. (play, delete, etc.)

y

Regular back up is recommended to prevent data loss.

y

The delete function may not be supported according to the USB status. (lock, etc.)

Operating 21

Playback Effect

The unit supports various sound and playback effects: AUTO DJ, DJ PAD.

AUTO DJ

Auto DJ blends the end of one song into the beginning of another for seamless playback.

It equalizes volume across tracks/files for uninterrupted playback.

Press

AUTO DJ

on the remote control repeatedly, the display changes as followings.

SHUFFLE SEQUENTIAL OFF

On Display

OFF

SHUFFLE

Description

-

The music is played randomly on this mode.

SEQUENTIAL

The music is played repeatedly on this mode.

y

,

Note

AUTO DJ mode does not support searching for a section within a track/file or to play repeatedly or randomly.

y

If you move to other functions or stop the music using

Z

on AUTO DJ mode, AUTO DJ will be disabled.

y

AUTO DJ is not supported in the music file whose length is less than 60 seconds.

y

Only SEQUENTIAL is selected when played

JUKEBOX list.

DJ PAD

It allows you to mix CLUB, DRUM or USER sound effect. Each mode has up to 3 sounds effect.

1. Press and hold

DJ PAD (CLUB, DRUM or USER)

on the unit to select a desired DJ PAD sound effect.

2. Press a

DJ PAD (1, 2, 3)

of desired sound on the unit .

y

,

Note

If you want to use USER, you have to register a source with “LG XBOOM” app.(Android

Only)

If the source is not register to USER, “EMPTY” or “NO SOUND” appears on the display window.

y

Initial DJ PAD mode is CLUB sound effect.

y

DJ PAD mode is displayed for 3 seconds when you press

DJ PAD (CLUB, DRUM or

USER)

on the unit.

y

The DJ PAD sound is mixed when you press a

DJ PAD (1, 2, 3)

on the unit .

y

The currently playing DJ PAD sound is stopped and the selected DJ PAD sound outputs if you press a different

DJ PAD (1, 2,

3)

on the unit while DJ PAD sound is playing.

3

3

22 Operating

Using BLUETOOTH® wireless technology

About Bluetooth

Bluetooth

is wireless communication technology for short range connection.

The sound may be interrupted when the connection interfered by the other electronic wave or you connect the

Bluetooth

in the other rooms.

Connecting individual devices under

Bluetooth

wireless technology does not incur any charges.

A mobile phone with

Bluetooth

wireless technology can be operated via the Cascade if the connection was made via

Bluetooth

wireless technology.

y y

Available Devices: Smart phone, MP3, Notebook, etc.

Version: 4.0

y

Codec: SBC, AAC

Bluetooth Profiles

In order to use

Bluetooth

wireless technology, devices must be able to interpret certain profiles.

This unit is compatible with following profile.

A2DP (Advanced Audio Distribution Profile)

Listening to music stored on the

Bluetooth devices

Pairing your unit and Bluetooth device

Before you start the pairing procedure, make sure the

Bluetooth

feature is activated on your

Bluetooth

device. Refer to your

Bluetooth

device’s user guide. Once a pairing operation is performed, it does not need to be performed again.

1. Turn on the unit.

,

Note

When Bluetooth connection lock is activated, you can search

Bluetooth

device in BT function.

2. Operate the

Bluetooth

device and perform the pairing operation. When searching for this unit with the

Bluetooth

device, a list of the devices found may appear in the

Bluetooth

device display depending on the type of

Bluetooth

device. Your unit appears as “LG ON7 (XX)”.

y

,

Note

XX means the last two digits of

Bluetooth

address. For example, if your unit has a

Bluetooth

address such as

9C:02:98:4A:F7:08, you will see

“ LG ON7 (

08

) ” on your

Bluetooth

device.

y

Depending on the

Bluetooth

device type, some devices have a different pairing way. For details about

Bluetooth

pairing, refer to your

Bluetooth

device manual.

y

You can connect this unit with up to 3

Bluetooth

devices simultaneously using the same method as described above, only in the

Bluetooth

function.

y

The multi phone pairing connection is only supported on Android devices. (Multi phone pairing connection may not be supported depending on the connected device specifications.)

y

Removable/detachable

Bluetooth

devices

(Ex: Dongle etc.) will not support multi phone pairing.

3. When this unit is successfully connected with your

Bluetooth

device, “PAIRED” appears on the display window and change to

Bluetooth

device name soon. Then “BT” will appear on the display

y

window.

,

Note

“PAIRED” will momentarily appear on the display when you connect other devices for multi phone pairing.

y

If the device name is unavailable, “_” will be displayed.

4. Listen to music.

y

To play a music stored on your

Bluetooth

device, refer to your

Bluetooth

device’s user guide.

,

Note

When using

Bluetooth

technology, you have to make a connection between the unit and the

Bluetooth

device as close as possible and keep the distance.

However, it may not work well in certain situations as described below:

There is a obstacle between the unit and the

Bluetooth

device.

There is a device using same frequency with

Bluetooth

technology such as a medical equipment, a microwave or a wireless LAN device.

y

If

Bluetooth

connection does not work well, try pairing it again.

y

Even if this unit is connected to up to 3

Bluetooth

devices in the

Bluetooth

mode, you can play and control music by using only one of the connected devices.

Operating 23

y

,

Note

The sound may be interrupted when the connection has interference from other electronic devices.

y

Depending on the type of the device, you may not be able to use the

Bluetooth

function.

y

You can enjoy wireless system using phone,

MP3, Notebook, etc.

y

The more distance between the unit and the

Bluetooth

device, the lower the sound quality becomes.

y

Bluetooth

connection will be disconnected when the unit is turned off or the

Bluetooth

device gets too far from the unit.

y

When

Bluetooth

connection is disconnected, connect the

Bluetooth

device to the unit again.

y

When a

Bluetooth

device is not connected,

“BT READY” appears on the display window.

y

When you use the

Bluetooth

function, adjust the volume to a proper level on the

Bluetooth

device.

y

When you connect

Bluetooth

device (iOS device etc.) to this unit or operate the device, the volume level can be synchronized with each other.

y

Bluetooth

connection will be disconnected when you change the

Bluetooth

function to some other function. In “LG XBOOM” app connection, only one device which you are playing keeps

Bluetooth

connection. You can control the

Bluetooth

device with this unit but you cannot use sound output.

y

When entering the

Bluetooth

function, this unit automatically connects to the last connected

Bluetooth

device or the device which played back last.

(Auto connection may not be supported depending on the connected device specifications.)

3

24 Operating

Controls connected Bluetooth device

You can control connected Bluetooth device by the unit; play, pause, stop, skip.

y

,

Note

Only Android OS and iOS is available to use this function.

y

This function may not be supported depending on the

Bluetooth

device, or operated differently.

3

Bluetooth connection lock (BT LOCK)

You can limit

Bluetooth

connection to only

BT (

Bluetooth

) and LG TV function to prevent unintended

Bluetooth

connections.

To turn this function on, press and hold

N

for about

5 seconds in BT (

Bluetooth

) function.

“ON-BT LOCK” appears then you can limit

Bluetooth

connection.

To turn this function off, press and hold

N

for about

5 seconds in BT (

Bluetooth

) function.

“OFF-BT LOCK” appears.

y

,

Note

Even if you set up

Bluetooth

connection lock to On, this unit turns on by Auto Power function. Turn off Auto Power function to

prevent it. (Page 38)

y

When you turn on or off the

Bluetooth

connection lock, search and connect again using

Bluetooth

after deleting the paired list of your

Bluetooth

device.

y

When you turn on the

Bluetooth

connection lock, multi phone pairing is not supported.

Using the LG XBOOM

App

,

Note

It is recommended to use the latest version of app.

About “LG XBOOM” App

“LG XBOOM” app brings a suite of new features to this unit.

To enjoy more features, you are recommended to download and install free “LG XBOOM” app.

Operating 25

Install “LG XBOOM” App onto

Your Bluetooth Device

There are two ways to install “LG XBOOM” App onto

Your

Bluetooth

Device.

Install “LG XBOOM” App through QR code

1. Install “LG XBOOM” app through QR code. Use the scanning software to scan the QR code.

<Android> <iOS>

2. Tap an icon for installation.

y

,

Note

Make sure that your

Bluetooth

device is connected to the Internet.

y

Make sure that your

Bluetooth

device has a scanning software application. If you don’t have one, download one from “Google

Android Market (Google Play Store)” or

“Apple App Store”.

y

Depending on the area, QR code may not work.

y

-

You can find the available application of this unit by using “LG Audio” app. (Android Only)

Android O/S: Ver 5.0 (or later)

3

3

26 Operating

Install “LG XBOOM” App through

“Google Android Market (Google Play

Store)” or “Apple App Store”

1. Tap the “Google Android Market (Google Play

Store)” or “Apple App Store” icon.

2. In the search bar, type in the “LG XBOOM” and search it.

3. In the search result list, find and tap “LG XBOOM” to start downloading

Bluetooth

app.

y

,

Note

Make sure that your

Bluetooth

device is connected to the Internet.

y

Make sure that your

Bluetooth

device is equipped with “Google Android Market

(Google Play Store)” or “Apple App Store”.

Activate Bluetooth with “LG

XBOOM” App

“LG XBOOM” app helps to connect your

Bluetooth

device to this unit.

Tap “LG XBOOM” app icon on the home screen to open “LG XBOOM” app, and go to the main menu.

y

,

Note

“LG XBOOM” app will be available in the software version as follow;

Android O/S: Ver 5.0 (or later)

iOS O/S: iOS10 (or later)

y

If you use “LG XBOOM” app for operation, there would be some differences between

“LG XBOOM” app and the supplied remote control. Use the supplied remote control as necessary.

y

Depending on the

Bluetooth

device, “LG

XBOOM” app may not work.

y

After connection of “LG XBOOM” app, music may be output from your

Bluetooth

device. In this case, try connecting procedure again.

y

If you operate the other applications or change the settings on your

Bluetooth

device while using “LG XBOOM” app, “LG

XBOOM” app may operate abnormally.

y

When “LG XBOOM” app operates abnormally, check your

Bluetooth

device and the connection of “LG XBOOM” app and then try to connect again.

y

Depending on the smart phone's operating system, you have some differences for “LG

XBOOM” operation.

y

Check

Bluetooth

setting on your

Bluetooth

device if “LG XBOOM” app connection does not work well.

Operating 27

Radio Operations

Be sure that FM antenna is connected. (

Page 15)

Listening to the radio

1. Press until FM appears in the display window.

The last received station is tuned in.

2. Auto tuning:

Press and hold

TUNING-/+

on the remote control or

C

/

V

on the unit until the frequency indication starts to change, then release.

Scanning stops when the unit tunes in a station.

Or

Manual tuning:

Press

TUNING-/+

on the remote control or

C

/

V

on the unit repeatedly.

3. Adjust the volume by pressing

VOL +/-

repeatedly.

Improving poor FM reception

Press

N

. This will change the tuner from stereo to mono and usually improve the reception.

Presetting the Radio Stations

You can preset 50 stations for FM.

Before tuning, make sure to turn down the volume.

1. Press until FM appears in the display window.

2. Select the desired frequency by pressing

TUNING -/+

on the remote control or

C

/

V

on the unit.

3. Press on the remote control. A preset number will blink in the display window.

4. Press

W

/

S

on the remote control to select the preset number you want.

5. Press on the remote control. The station is stored.

6. Repeat steps 2 to 5 to store other stations.

7. To listen a preset station, press

PRESET·FOLDER

W

/

S

or

0

to

9

numerical buttons on the remote control.

Deleting all the saved stations

1. Press on the remote control.

“DEL ALL” will flash up on the display window

2. Press on the remote control to erase all the saved radio stations.

“DELETED ALL” will scroll on the display window.

3

3

28 Operating

Sound adjustment

Setting the sound mode

This system has a number of pre-set equalizers. The displayed items for the equalizer may be different depending on sound sources and effects.

You can select a desired sound mode by using

EQUALIZER

on the remote control.

On Display

BASS (BASS BLAST) or

BASS+ (BASS BLAST+)

POP

CLASSIC

ROCK

JAZZ

FOOTBALL

STANDARD

Description

Reinforces the bass and powerful sound.

This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an actual rock, pop, jazz or classic concert.

You can enjoy the equalizer FOOTBALL

STADIUM.

You can enjoy optimized sound.

You can select a desired sound mode by using

SPECIAL EQ

on the remote control or

SPECIAL EQ /

BASS BLAST

(or

BASS BLAST+

) on the unit.

On Display Region Description

FUNK, REGUETON,

SAMBA,

MERENGUE, AXE,

SALSA, SERTANEJ,

FORRO

Latin

America

ARABIC

DANGDUT

Middle East

Indonesia

Optimized equalizer for the music genre preferred in each region.

AFRO Africa

INDIA India

,

Note

By pressing and holding

SPECIAL EQ / BASS

BLAST

(or

BASS BLAST+

) on the unit for 3 seconds, you can directly select BASS (BASS

BLAST) or BASS+ (BASS BLAST+) effect.

Setting the USER EQ

You can adjust the sound level of Bass, Middle and

Treble as your preference.

1. Press on the unit. “USER EQ” is displayed.

2. Press on the unit repeatedly until desired setting appears in the display window.

3. Rotate Multi Jog on the unit to adjust the value.

Operating 29

Advanced Operations

Recording to USB

You can record a various sound source to USB.

(CD, USB 1, FM)

1. Connect the USB device to the unit.

2. Press to select a function you want to record.

3. Start the recording by pressing

USB REC

on the remote control or

USB REC / DEMO

on the unit.

Function Status Result

Play/Pause Recorded until stop.

CD, USB 1

Resume stop

(Page

33

)

Quick recorded the latest song.

Full stop

Quick recorded All songs

In case below, scope is limited.

- After File search

(Page 19

), quick recorded an indexed song

- Only while the Folder name is displayed on the display window, quick recording All songs on

Folder. (Folder Search

Mode is released when there is no button input for a few seconds after entering the folder search

mode.) (Page 19)

- After JUKEBOX On

(Page 31

), quick recorded All songs of

JUKEBOX.

FM Recorded until stop.

To stop recording

To stop recording, p ress

USB REC

on the remote control or

USB REC / DEMO

on the unit.

To select recording bit rate

You can select recording bit rate. (CD, USB 1, FM)

1. Press and hold

USB REC

on the remote control or

USB REC / DEMO

on the unit for 3 seconds.

2. Press

/

V

to select a bit rate.

3. Press

USB REC

on the remote control or

USB REC / DEMO

on the unit to finish the setting.

The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense.

This equipment should not be used for such purposes.

Be responsible

Respect copyrights

- I f you connect both USB1 and USB2, press

USB

REC

on the remote control or

USB REC / DEMO

on the unit when USB1 or USB2 which you want to record blinks in the display window.

3

3

30 Operating

y

,

Note

For stable recording, the output sound level goes down on its own when you record music from CD to USB.

y y y

You can only change volume level between

MIN and 30 during recording. (Only CD function)

When you stop recording, the file that has been recorded at that time will be stored.

(Except when recording MP3/ WMA files that are in stop status.)

Do not remove the USB device or turn off the unit during USB recording. If does not, an incomplete file may be made and not deleted on PC.

y

If USB recording does not work, the message like “NO USB”, “ERROR”, “USB FULL”, “NOT

SUPPORT” or “FILE MAX” is displayed on the display window.

y

Multi card reader device or external HDD can not be used for USB recording.

y

A file is recorded by about 512 Mbyte when you record for a long term.

$%@3&$

"6%*[email protected]

"6%*[email protected]

y

,

Note

You can record various sound using DJ PAD,

MIC or GUITAR.

(Except when recording USB/ CD that are in stop status.)

y

Microphone and Guitar sound will be recorded by fixed volume level even if you control Microphone and Guitar volume.

y

You may not store more than 2,000 files.

y

In case of the unsupported MP3/WMA file, the file recording may be stopped.

y

When you are recording during playback, the sound now playing is output.

y

VOICE CANCELLER or KEY CHANGER will be reset, if you use recording function during operating VOICE CANCELLER or KEY

CHANGER.

y y

VOICE CANCELLER or KEY CHANGER can not be operated during recording.

It’ll be stored as follows.

AUDIO CD

Play or pause status

$%@3&$

"6%*[email protected]

"6%*[email protected]

The other status

'*-&@3&$

$%@3&$

"6%*[email protected]

"6%*[email protected]

53"$,@

53"$,@

MP3/WMA

Play or pause status

'*-&@3&$

$%@3&$

"6%*[email protected]

"6%*[email protected]

53"$,@

53"$,@

The other status

'*-&@3&$

"#$ 'JMFOBNF

%&' 'JMFOBNF

Tuner

5IFPUIFSTUBUVT

5IFPUIFSTUBUVT

Tuner: The current recording frequency is shown.

'*-&@3&$

"#$ 'JMFOBNF

%&' 'JMFOBNF

Operating 31

JUKEBOX Playback

JUKEBOX function enables you to make a playlist of your favorite tracks/files from a disc or USB device.

A playlist of up to 100 tracks/files can be entered.

Making JUKEBOX list

1. Press and hold

JUKEBOX/MEMORY

on the remote control to enter the edit mode.

(Playing will be stopped when you press

JUKEBOX/MEMORY

on the remote control.)

2. Select a track/file by pressing

C

/

V

on the remote control.

3. Press on the remote control to save the track/file.

4. Repeat steps 2 - 3 to store other tracks/files.

(You can modify the list by pressing

PRESET·FOLDER

W

/

S

on the remote control to select the JUKEBOX program number.)

5. Press on the remote control once again.

To play the JUKEBOX list, press

N

on the remote control after you make the list.

,

Note

When making or modifying the JUKEBOX list,

REPEAT mode is off.

Enjoying JUKEBOX

Press

JUKEBOX/MEMORY

on the remote control once. “ON-JUKEBOX” appears on the display window.

To play JUKEBOX list, press

N

on the remote control.

To cancel it, press

JUKEBOX/MEMORY

on the remote control once.

“OFF-JUKEBOX” appears on the display window.

Editing JUKEBOX

1. Press and hold

JUKEBOX/MEMORY

on the remote control to enter the edit mode.

(Playing will be stopped when you press

JUKEBOX/MEMORY

on the remote control.)

2. Press

W

/

S

on the remote control to select a track/file to edit.

3. Press

/

V

on the remote control.

4. Press on the remote control.

5. Repeat 2 to 4 to store the other tracks/files.

6. Press on the remote control once again.

To play the JUKEBOX list, press

N

on the remote control after you edit the list.

Deleting JUKEBOX list

Deleting function only works in the edit mode.

1. Press and hold

JUKEBOX/MEMORY

on the remote control to enter the edit mode.

Press

Or

DELETE

on the remote control while

JUKEBOX is played to enter the edit mode.

2. Select a song by pressing

PRESET·FOLDER

W

/

S

on the remote control repeatedly.

3. Press on the remote control while a song is selected.

y

,

Note

If there is no JUKEBOX list, “NO PROG” appears on the display window when you press

JUKEBOX/MEMORY

on the remote control .

y

JUKEBOX is switched off in the case below.

-

-

-

-

Changing to a different function.

Turning the unit off and on.

Operating the numerical buttons on the remote control.

Playing a file by using

SEARCH

and

Multi jog on the unit.

y

JUKEBOX list is cleared in the case below.

-

-

Removing the disc or the USB device.

Deleting or recording music files in the USB device.

3

3

32 Operating

Other Operations

Turn off the sound temporarily

Press

[

on the remote control to mute your sound.

You can mute your unit, for example, to answer the telephone, the “MUTE” will appear in the display window.

To cancel it, press

[

on the remote control again or change the volume level.

DRC (Dynamic range control)

Make the sound clear when the volume is turned down and prevent a sudden sound increase (Dolby

Digital only).

Press

N

in OPTICAL function to turns on or off this function.

On Display

ON-DRC

Description

DRC function is turned on.

OFF-DRC

DRC function is turned off.

,

Note

This function only operates on OPTICAL function.

CHILDSAFE Mode

This function helps to prevent you from being surprised when you turn on the unit in case that the volume of the unit is set at a high level.

To turn on CHILDSAFE mode, press and hold

OK

on the unit when the volume of the unit is “MIN”.

In CHILDSAFE mode, the volume increase gradually.

To turn off CHILDSAFE mode, press and hold

OK

on the unit when the volume of the unit is “MIN” and this mode is turned on.

,

Note

In case of CD, USB or BT (

Bluetooth

) function,

CHILDSAFE mode does not work after about

2 minutes from power on the unit even if this mode is enabled.

Operating 33

DEMO

In the power off state, press

USB REC / DEMO

on the unit once. The unit will power on and display the each of functions. To cancel the DEMO function, press

USB REC / DEMO

on the unit once more.

Resume stop

The unit records the point where you pressed

Z

depending on the disc or USB.

If you press

Z

twice, the unit will clear the stopped point.

Using your TV remote control

You can control some functions of this unit by your

TV remote control even by other company’s product.

Controllable functions are volume up/down and mute.

Press and hold

[

on the remote control for about 3 seconds in OPTICAL function to turn on or off this function.

On Display

ON-TV REMOTE

Description

TV REMOTE function is turned on.

OFF-TV REMOTE

TV REMOTE function is turned off.

y

,

Note

Supported TV brands

LG

Samsung

Panasonic

Toshiba

Philips

Vizio

y

Make sure that the sound output of your TV is set to [External speaker].

y

Depending on the remote control, this function may not work well.

y

This function does not operate on LG TV's magic remote control.

y

This function only operates on the OPTICAL function.

3

3

34 Operating

Using Guitar

1. Connect your guitar to the

GUITAR IN

jack.

2. Play the music you want.

3. Play your guitar with the accompaniment. Adjust the guitar volume by pressing

MIC/GUITAR -/+

on the unit.

y

,

Note

When not using the guitar, set the GUITAR volume to minimum and remove the guitar from the

GUITAR IN

jack.

y

If the guitar is set too near the speaker, a howling sound may be produced. In this case, move the guitar away from the speaker or decrease the sound level by using the

MIC/

GUITAR -/+

on the unit.

y y

If sound through the guitar is extremely loud, it may be distorted. In this case, press

MIC/

GUITAR -/+

on the unit .

Do not connect a microphone to the

GUITAR

IN

jack.

Using Microphone

1. Connect your microphone to the

MIC IN

jack.

2. Play the music you want.

3. Sing along with the accompaniment. Adjust the microphone volume by pressing

MIC/GUITAR -/+

on the unit.

y

,

Note

When not using the microphone, set the

MIC volume to minimum or turn off the MIC and remove the microphone from the

MIC

IN

jack.

y

If the microphone is set too near the speaker, a howling sound may be produced. In this case, move the microphone away from the speaker or decrease the sound level by using the

MIC/GUITAR -/+

on the unit.

y

If sound through the microphone is extremely loud, it may be distorted. In this case, press

MIC/GUITAR -/+

on the unit .

y y

You can give an echo effect or to the sound from the microphones by pressing

MIC ECHO

.

Do not connect a guitar to the

MIC IN

jack.

VOICE CANCELLER

You can reduce the vocal tones during music playback from various input sources.

Press the

VOICE CANCELLER

and “ON-VOICE

CANCELLER” will appear in display window.

To cancel it, press

VOICE CANCELLER

again.

The quality of the VOICE CANCELLER may be different depending on the recording conditions of the music files.

y y y y y

,

Note

This function is available in the CD, USB or BT

(

Bluetooth

) Function.

If the function is not available, “NOT

SUPPORT” appears in the display window.

This function is available to use only when a microphone is connected.

If a microphone is not connected, “INSERT

MIC” appears in the display window.

It is not available on the mono source.

y y

To initialize it, change the function or disconnect the microphone.

This function may not be initialized depending on the status of connected devices.

Operating 35

KEY CHANGER

You can adjust the key to 9 steps (4 steps higher, 4 steps lower and the original key).

y

To make key more sharp, one by one, press the

KEY CHANGER

(

L

) repeatedly during playback.

y

To make the key more flatten, one by one, press the

KEY CHANGER

(

l

) repeatedly during playback.

y

,

Note

This function is available in the CD, USB or BT

(

Bluetooth

) Function.

y

To initialize it, change the function, disconnect the microphone or change the music.

y

This function may not be initialized depending on the status of connected devices.

y

If the function is not available, “NOT

SUPPORT” appears in the display window.

y

If a microphone is not connected, “INSERT

MIC” appears in the display window.

3

3

36 Operating

VOCAL EFFECTS

When you connect your microphone to the MIC jack, you can enjoy karaoke function by changing voice in the various source.

To select various vocal effects mode, pressing

VOCAL

EFFECTS

repeatedly when vocal effects mode appears in the display window.

BASS SOPRANO HELIUM ROBOT

DUET MAN DUET WOMAN BASS ECHO1

SOPRANO ECHO1 HELIUM ECHO1

ROBOT ECHO1 DUET MAN1 DUET

WOMAN1 BASS ECHO2 SOPRANO

ECHO2 HELIUM ECHO2 ROBOT ECHO2

y

DUET MAN2 DUET WOMAN2

OFF

,

Note

If a microphone is not connected, “INSERT

MIC” appears in the display window.

y

If you press

KEY CHANGER

or

MIC ECHO

on VOCAL EFFECTS mode, after backing up current VOCAL EFFECTS, turn off VOCAL

EFFECTS mode and operate KEY CHANGER or ECHO mode.

y

To turn off VOCAL EFFECTS mode, press and hold

VOCAL EFFECTS

.

ECHO

When you connect your microphone to the MIC jack, you can give an echo effect to the sound from the microphones by pressing

MIC ECHO

.

ECHO 1 ECHO 2 OFF

y

,

Note

If a microphone is not connected, “INSERT

MIC” appears in the display window.

y

If you press

VOCAL EFFECTS

button on

ECHO mode, after backing up current ECHO, turn off ECHO mode and operate VOCAL

EFFECTS mode.

Press

MIC ECHO

again, after backing up current VOCAL EFFECTS, operate ECHO mode.

Operating 37

LIGHTING

This function offers a party atmosphere by operating the lighting on the unit.

Press

LIGHTING

on the unit repeatedly.

PARTY WATER FOREST (MY STYLE) OFF

y

,

Note

Lighting function is available in all functions.

y

Lighting mode retains its previous mode when you first press

LIGHTING

on the unit, press again to change modes.

y

If you want to use MY STYLE, you have to register a source with “LG XBOOM” app.

y

Do not look directly at the light emitting part when the LIGHTING is turned on.

y

Operation may be different depending on the played music, connected device or setting status.

y

If the illumination brightness is glaring, switch on the room lights or turn off the LIGHTING of the unit.

y

You can also turn off the light by pressing and holding

LIGHTING

on the unit.

Sleep Timer Setting

Press

SLEEP

on the remote control repeatedly to select delay time between 10 and 180 minutes.

After the delay time, the unit will be turned off.

To cancel the sleep function, press

SLEEP

on the remote control repeatedly until “OFF” appears.

y

,

Note

You can check the remaining time before the unit is turned off. Press

SLEEP

on the remote control to check or change the remaining time.

y

You can edit the remain time when the remaining time or “DIMMER” is displayed.

Dimmer

Press

SLEEP

on the remote control once.

The display window will be darkened by half.

To cancel it, press

SLEEP

on the remote control repeatedly until “OFF” appears.

,

Note

All the lighting turns off when Dimmer is being operated.

3

3

38 Operating

AUTO POWER On

This unit automatically turns on by an input source:

LG TV,

Bluetooth

or Optical.

When you turn on your TV connected to this unit, this unit recognizes the input signal and selects the suitable function. You can hear the sound from the unit.

If you try to connect your

Bluetooth

device, this unit turns on and connects your

Bluetooth

device.

You can play your music.

When you turn off this unit by pressing

1

on the unit for 5 seconds each time, you can turn on or off the AUTO POWER function.

On Display

ON-AUTO POWER

Description

AUTO POWER function is turned on.

OFF-AUTO POWER

AUTO POWER function is turned off.

y

,

Note

Depending on the connected device, this function may not operate.

y y y

Depending on the connected device, the unit turns on but

Bluetooth

function may not be connected.

If you disconnect

Bluetooth

connection by this unit, some

Bluetooth

devices try to connect to the unit continually. Therefore it is recommended to disconnect the connection before turning off the unit.

If you try to connect to the “LG XBOOM” app,

Bluetooth

function of this unit is turned on.

(Android Only)

y y

If you turn on the unit using LG TV or

Bluetooth

function, proper function of this unit is turned on.

If you have already paired with this unit, this unit can automatically turn on by an input source when this unit is turned off.

y

If you turned off the unit directly, it cannot be turned on automatically by AUTO POWER function. However the unit can be turned on by AUTO POWER function when an optical signal comes in after 5 seconds of no signal.

Auto function change

This unit recognizes input signals such as Optical,

Bluetooth

and LG TV and then automatically changes to the suitable function.

When you try to connect Bluetooth device

When you try to connect your

Bluetooth

device to this unit,

Bluetooth

function is selected. Play your music on the

Bluetooth

device.

When optical signal comes in

When you turn on the external device connected to this unit by an optical cable, this unit changes the function to optical. You can hear the sound from your device.

When LG TV is connected

When you turn on your LG TV connected by LG

Sound Sync (Wireless connection), this unit changes the function to LG TV. You can hear the sound from your TV.

Operating 39

y

,

Note

This function is not available during recording or deleting.

y

If the

Bluetooth

connection lock function is set,

Bluetooth

and LG TV connection will be only available on

Bluetooth

and LG TV function.

y

LG Sound Sync (Optical) changes the same

OPTICAL function.

Setting the Clock

1. Turn the unit on.

2. Press and hold

CLOCK

on the remote control.

3. Select time mode by pressing

C / V

on the remote control.

- AM 12:00 (for an AM and PM display) or 0:00

(for a 24 hour display)

4. Press on the remote control to confirm your selection.

5. Select the hours by pressing

C / V

on the remote control.

6. Press on the remote control.

7. Select the minutes by pressing

C / V

on the remote control.

8. Press on the remote control.

Setting the Clock through “LG

XBOOM” App

Install “LG XBOOM” app on your Android or iOS device. (

Page 25-26)

Your unit’s clock will be automatically synchronized with your device by activating

Bluetooth

connection through “LG XBOOM” app.

3

3

40 Operating

Using your unit as an alarm clock

1. Turn the unit on.

2. Press and hold

ALARM

on the remote control.

3. Press

/

V

on the remote control to change the hours and minutes and press

SET

on the remote control to save.

4. Press

/ V

on the remote control to select function and press

SET

on the remote control to save.

- Press

C / V

on the remote control to select a preset number when you select tuner and then, press

SET

on the remote control.

If there is no preset number, this step is skipped.

5. Press

/ V

on the remote control to change the volume and press

SET

on the remote control to save.

y y y y

,

Note

If you set the clock time, you can check the time by pressing

CLOCK

on the remote control even when the unit is turned off.

You can set alarm after you set the clock time.

If you set the clock time and alarm, you can check the alarm setting information by pressing

ALARM

on the remote control even when the unit is turned off.

You can select ALARM ON/OFF mode by pressing

ALARM

on the remote control .

WIRELESS PARTY LINK

Connection

You can enjoy the sound by using two units. For enjoying WIRELESS PARTY LINK, you need to purchase another unit.

It is compatible with unit that supports WIRELESS

PARTY LINK.

1. Press

TWIN

on the unit.

ROLE SELECT appears in the display window.

2. Press

TWIN

on the unit to select MAIN or

OTHER.

- unit: Selects MAIN.

- unit: Selects OTHER.

Two units try to connect with each other.

3. When these units are successfully connected each other, each of connected device names appears in the each unit.

Operating 41

y

,

Note

If you are using the LG Sound Sync or

OPTICAL connection, this function is not available.

If you try to connect WIRELESS PARTY

LINK when using LG Sound Sync function or OPTICAL function, “NOT SUPPORT” appears in the display window.

If you change the function from any other to OPTICAL or connected LG Sound Sync

/OPTICAL when using WIRELESS PARTY

LINK, the WIRELESS PARTY LINK will be released.

y

You can use microphone or guitar in the

OTHER unit only. In case of OTHER unit, some functions are supported only.

y y y

When WIRELESS PARTY LINK is disconnected, OTHER unit is changed to BT

(

Bluetooth

) function.

If the connection is failed, “FAILED” appears in the display window.

Mute function is synchronized with each other.

y y

WIRELESS PARTY LINK connection will be disconnected when you turn off the unit or press

3

TWIN

on the unit.

Sound of MAIN unit and OTHER unit may be different depending on playback status or source.

3

3

42 Operating

y

,

Note

Check the following information when connecting to

Bluetooth.

-

-

-

-

-

You can connect only one

Bluetooth

device in the MAIN unit. You cannot connect

Bluetooth

device to the OTHER unit.

WIRELESS PARTY LINK connection is only supported on Android devices.

(WIRELESS PARTY LINK connection may not be supported depending on the connected device specifications or OS.)

Removable/detachable

Bluetooth

devices (ex. Dongle etc.) will not support

WIRELESS PARTY LINK connection.

When WIRELESS PARTY LINK is connected,

Bluetooth

connection is not available in status of recording or deleting.

If you connect WIRELESS PARTY

LINK while you are playing connected

Bluetooth

device, it may be reconnected again, depending on phone specification.

4 Troubleshooting

Troubleshooting 43

Troubleshooting

General

Problem

The unit does not work properly.

No Power.

No sound.

Cause & Solution

y

Turn off the power of this unit and the connected external device (TV, Woofer,

DVD-player, Amplifier, etc.) and turn them on again.

y

Disconnect the power cord of this unit and the connected external device (TV,

Woofer, DVD-player, Amplifier, etc.) and then try connecting again.

y

Previous setting may not be saved when device power is shut off.

y

The power cord is not plugged in. Plug in the power cord.

y

Check whether electricity failed.

Check the condition by operating electronic devices using the same AC outlet.

y

Check whether you select right function.

Press function button and check if you have selected the right function.

The unit does not start playback.

y

An unplayable disc is inserted. Check the playable disc.

y y

No disc is inserted. Insert a disc.

The disc is dirty. Clean the disc. (P

age 47)

y

The disc is inserted upside down.

Place the disc with the label or printed side facing upwards.

Radio stations cannot be tuned in properly.

y

The antenna is positioned or connected poorly.

Connect the antenna securely.

y

The signal strength of the radio station is too weak.

Tune to the station manually.

y

No stations have been preset or preset stations have been cleared (when tuning by scanning preset channels).

Preset some radio stations, see page 27 for details.

4

44 Troubleshooting

4

Problem Cause & Solution

The remote control does not work properly.

y

The remote control is too far from the unit.

Operate the remote control within about 7 m (23 feet).

y

There is an obstacle in the path of the remote control and the unit.

Remove the obstacle.

y

The batteries in the remote control are exhausted.

Replace the batteries with new ones.

No speaker light.

y

Check the light effects by pressing

LIGHTING

(Page 37).

LG Sound Sync does not work.

y y

Check whether your LG TV supports LG Sound Sync.

Check connection of LG Sound Sync.

y

Check sound setting of your TV and this unit.

The AUTO POWER ON function does not work.

y

Check connection of the external device such as TV or

Bluetooth

device.

y

Depending on the connected device, this function may not operate.

USB is not recognized.

y

Format the USB device and connect it again. When formatting the USB device,

select the available file system. (Page 7).

NOTES to release Demo mode

Problem

Can not change input source with ‘

F

’ key such as

BT(

Bluetooth

), USB etc. and only DEMO mode is showing in the display.

Remote Control does not work properly.

Cause & Solution

y

Press ‘

DEMO

’ Key on the unit for 15 seconds.

5 Appendix

General specifications

General

Power requirements

Power consumption

Dimensions (W x H x D)

Operating temperature

Operating humidity

Inputs

Digital audio in (OPTICAL IN)

Microphone (MIC IN)

Guitar (GUITAR IN)

Refer to the main label on the unit.

Refer to the main label on the unit.

Approx. 330.0 mm x 785.0 mm x 344.0 mm

5 °C to 35 °C

5 % to 60 % RH

3.3 V (p-p), Optical jack x 1

Sensitivity 20 mV (1 kHz), 6.3 mm jack x 1

Sensitivity 190 mV (1 kHz), 6.3 mm jack x 1

Tuner

FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz

System

Frequency Response

Signal-to-noise ratio

250 to 20,000 Hz

More than 80 dB

Dynamic range

Bus Power Supply (USB)

Available Digital Input Audio

Sampling Frequency

More than 80 dB

5 V

0

500 mA

32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz

y

Available Digital Input Audio format Dolby Audio, PCM

Design and specifications are subject to change without notice.

Appendix 45

5

5

46 Appendix

Trademarks and licenses

All other trademarks are trademarks of their respective owners.

Manufactured under license from Dolby

Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.

The

Bluetooth

® word mark and logos are registered trademarks owned by the Bluetooth

SIG, Inc. and any use of such marks by LG

Electronics is under license.

Other trademarks and trade names are those of their respective owners

“Made for iPhone,” and “Made for iPod” mean that an electronic accessory has been designed to connect specifically to iPhone or iPod, respectively, and has been certified by the developer to meet

Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Please note that the use of this accessory with iPhone or iPod may affect wireless performance.

Compatible iPhone/iPod

y

The unit supports the models as follows ;

iPhone XS Max

-

iPhone XS iPhone XR

iPhone X

-

iPhone 8 Plus iPhone 8

iPhone 7 Plus

-

iPhone 7 iPhone SE

iPhone 6s Plus

-

iPhone 6s iPhone 6 Plus

iPhone 6

-

iPhone 5s iPod touch (6th generation)

The system is compatible with the latest iOS.

Depending on your iPhone/iPod software version, you may not control your iPhone/iPod from the unit.

Appendix 47

Maintenance

Notes on Discs

Handling Discs

Never stick paper or tape on the disc.

Storing Discs

After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.

Cleaning Discs

Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center to out.

Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for old vinyl records.

Handling the Unit

When shipping the unit

Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.

Keeping the exterior surfaces clean

Do not use volatile liquids such as insecticide spray near the unit. Wiping with strong pressure may damage the surface. Do not leave rubber or plastic products in contact with the unit for a long period of time.

Cleaning the unit

To clean the unit, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.

Maintaining the Unit

The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. For details, please contact your nearest authorized service center.

5

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents