LG LH-CX246P Owner's Manual

LG LH-CX246P Owner's Manual
LH-CX246P.NA5ILLS-ENG
DVD/VCR COMBI RECEIVER
Combi Home Theater
System
OWNER'S MANUAL
MODEL: LH-CX246
(Main Unit: LH-CX246P
Speakers: LHS-CX246T, LHS-CX246W)
CD-R/RW
PAL
Before
please
connecting up, operating or repairing this
read this instruction booklet carefully and
product,
completely.
CAUTION
Warning: To reduce the risk of electric
shock, do not remove the cover or back
of this product. There are no user-serviceable parts inside. Refer servicing to
qualified service personnel.
Warning: To reduce the risk of fire or
electric shock, do not expose this product to dripping or splashing water, rain,
or moisture. Do not place objects filled
with water such as vases, on the product.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
IN CASE OF 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS ECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE 'STANDARD
DEFINITION' OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH
THIS MODEL 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
SERIAL NUMBER:
You can find the serial number on the back of the unit.
This number is unique to this unit and not available to
others. You should record requested information here
and retain this guide as a permanent record of your
purchase.
Model No.
Serial No.
Date of
Warning: This digital video disc player
employs a laser system. Use of controls,
adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation
exposure.
Warning: To prevent direct exposure to
laser beam, do not open the enclosure.
Visible laser radiation when open.
Never stare
laser beam.
Warning:
directly
into the
Caution: Do not install this product in a
as a book case or
confined space such
similar unit.
This product is manufactured to comply
with the radio interference requirements
of EEC DIRECTIVE 89/336/EEC, 93/68/EEC
and 73/23/EEC.
Notes
on
Copyrights:
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
2
______________________________
______________________________
Purchase_________________________
Contents
Introduction...................4
GeneralFeatures.......................32
SymbolUsedinthisManual...............4
AbouttheSymbolDisplay..............4
MovingtoanotherTITLE...............32
.32
Moving to another CHAPTER/TRACK
NotesonDiscs..........................4
HandlingDiscs........................4
StoringDiscs.........................4
CleaningDiscs........................4
TypesofPlayableDiscs...................5
Regionalcode..........................5
Disc-relatedterms.......................6
FrontPanel.............................7
DisplayWindow.........................8
RemoteControl.........................9
RearPanel............................10
InstallationandSetup.
.
.
.
.
.
.
.
.
.11
.
TV & Decoder
.11-12
(or another VCR Connections)
Accessory Audio/Video (A/V) Connections to
.
.
.
.
.
.
.
.
.
DVD/VCRCombireceiver................13
RadioAerialConnections................13
SpeakerSystemConnection..............14
SpeakerPositioning.....................15
Mini Glossary for Audio Stream &
Surroundmode.........................16
SoundMode...........................16
.17-21
BeforeOperation-VCRpart.
.17
Using your receiver for the very first time
.
.
.
.
.
.
.
.
.
.
.
.
Howtousethemainmenu..............19
.19
Tuning in TV stations Automatically
.21
TuninginTVstationsManually.
.21
ChangingtheorderofTVstations.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
DeletingTVstations...................21
.22-27
BeforeOperation-DVDpart.
On-ScreenDisplay......................22
InitialSettings.......................23-27
GeneralOperation....................23
.
.
.
.
.
.
.
.
.
.
.
LANGUAGE.........................23
MenuLanguage....................23
DiscAudio/Subtitle/Menu.
.23
DISPLAY...........................24
.
.
.
.
.
.
.
.
.
AUDIO.............................25
5.1SpeakerSetup..................25
.25
DynamicRangeControl(DRC).
.
.
.
.
.
.
Vocal.............................25
OTHERS...........................26
PBC.............................26
AutoPlay..........................26
DivX(R)VOD.......................26
LOCK(ParentalControl)................27
Rating............................27
.27
Password(SecurityCode).
CountryCode......................27
.
.
.
.
.
.
.
.
.
.
.
Operation....................27
Playingatape.......................27-31
.27
CM(CommercialMessage)Skip
OPR (Optimum Picture Response)
.27
.28
InstantTimerRecording(ITR).
ShowViewProgramming................29
Timer recording using On Screen Display
.30
.31
IfTimerrecordeventsOverlap
.31
Change (Deleting) the Timer Programme
.32-34
PlayingaDVDorVideoCD.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
RepeatA-B..........................33
Repeat.............................33
3DSurround.........................33
TimeSearch.........................33
Zoom..............................34
MarkerSearch.......................34
SpecialDVDFeatures...................34
TitleMenu..........................34
DiscMenu..........................34
CameraAngle.......................34
.34
ChangingtheAudioLanguage
.
.
.
.
.
.
.
.
.
.
Subtitles............................34
.35
PlayinganAudioCDorMP3/WMADisc
.36
AudioCDandMP3/WMADiscFeatures
Pause..............................36
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTrack................36
RepeatTrack/All/Off...................36
Search.............................36
Random............................36
RepeatA-B..........................36
3DSurround.........................36
ProgrammedPlayback.....................37
.37
RepeatProgrammedTracks.
.37
ErasingaTrackfromProgramList
.37
Erasing the Complete Program List
ViewingaJPEGDisc......................38
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow..........................38
StillPicture..........................38
MovingtoanotherFile.................38
Zoom..............................38
Torotatepicture......................38
To listen to MP3/WMA music watching picture
.38
5.1SpeakerSetup......................39
.40
PlayingaDVDVRformatDisc.
.
.
.
.
.
.
.
.
.
.
.
.
.
MaintenanceandService.................40
.
TVAspect.........................24
DisplayMode......................24
ProgressiveScan...................24
TVOutputSelect....................25
.
.
.
Initialpreset..........................17
SettingtheclockManually................18
Tosetthecoloursystem.................18
.
.
Search.............................32
.32
ChangingtheAudioChannel
Still Picture and Frame-by-Frame Playback
.33
SlowMotion.........................33
Random............................33
PlayingaDivXMovieDisc................41
Additional Features-VCR part
.
.
.
.
.
.
.
.
.
.42-43
.
OnScreenDisplay....................42
TapeCounterMemoryStop.............42
.42
Friendly User Guide (Video Doctor)
Hi-FiStereoSoundSystem.............43
.43
WideScreenCompatibility16:9
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Tosetthedecoder....................43
AdditionalFeatures.....................44
LastSceneMemory...................44
ScreenSaver........................44
VideoModeSetting...................44
CopyingfromDVDtoVCR................45
.45
Recording from another video recorder
RadioOperation........................45
.46
PresettingtheRadioStations
ListeningtotheRadio..................46
.
.
.
.
ToCleartheStoredRadioStations
.
.
.
.
.
.
.
.
.
.
.
.46
.47
.47
Mute...............................47
TuningintoaStationManually
Tuning into a Station Automatically
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
RDSOperation.......................47
Reference....................48
LanguageCodes.......................48
CountryCodes.........................48
Troubleshooting.....................49-50
Specification........................51-52
.
3
Introduction
About the
To
proper use of this product, please read this
owner's manual carefully and retain for future
Symbol Display
ensure
reference.
"
"
may appear on your TV display during operation and indicates that the function explained in this
owner's manual is not available
This manual
provides
information
on
the
operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service
on
that
specific
DVD
video disc.
Notes
Discs
on
location.
Symbol
Handling
Used in this Manual
Discs
Do not touch the
disc
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk of
by
the
playback side of the disc. Hold the
edges so that fingerprints do not get on
the surface. Never stick paper
or
tape
on
the disc.
electric shock.
The exclamation
point alerts you to the presimportant operating and maintenance
servicing instructions.
ence
/
of
Indicates hazards
unit itself
or
likely
to
other material
cause
harm to the
damage.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
is
applicable only
making
the task easier.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and
never leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
of the following symbols
represented by the sym-
one
to the disc
bol.
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
WMA
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
WMA Discs
spray intended for older
JPEG
JPEG Discs
DivX
DivX Discs
Setting
the
vinyl
Output
records.
Source
You must select one of your output
VCR) to view on the TV screen.
sources
(DVD
or
?I f you want to view output source of DVD deck:
Press DVD on the remote or DVD/VCR on the front panel
until DVD indicator
source
on
the front
of DVD deck is viewed
panel lights
on
the TV
and
output
screen.
?I f you want to view output source of VCR deck:
Press VCR on the remote or DVD/VCR on the front panel
until VCR indicator
source
4
on
the front
of VCR deck is viewed
panel lights
on
the TV
and
output
screen.
Types
of
Discs
Playable
Regional
code
This DVD
player is designed and manufacplayback of region "2" encoded DVD
software. This unit can play only DVD discs
DVD
tured for
(8cm/12cmdisc)
labeled "2"
Video CD
(VCD)
(8cm/12cmdisc)
Notes
Audio CD
?
(8cm/12cmdisc)
on
or
"ALL".
Regional
CD-R / CD-RW that contains audio titles, MP3, WMA,
and/or JPEG files.
Codes
Most DVD discs have
numbers in it
In addition, this unit plays DivX file, DVD -R, DVD +R,
DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and
2
clearly
a
globe
visible
on
with
the
one or more
cover.
This number must match your DVD/VCR Combi
receiver's regional code or the disc cannot play.
?
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears on the TV screen.
Notes:
?
Depending
ment
or
on
the conditions of the
the CD-R/RW
recording equip-
DVD -R, DVD +R,
disc itself, some CD-R/RW
(or
DVD
-
RW, DVD +RW)
(or
DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be
?
played
on
the unit.
Do not attach any seal or label to either side
or the recorded side) of a disc.
(the
labeled side
?
Do not
use
shaped
or
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
malfunctions.
DVDs and Video CDs
Notes
on
Some
playback operations
of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according
to disc content
manufacturer, therefore
not be available
or
designed by the software
playback features may
some
other functions may be added.
Manufactured under license from
Dolby Laboratories.
Logic", and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
"Dolby",
"Pro
Manufactured under license from
Digital
Theater
Inc. US Pat. No's. 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 and other US and
Systems,
world-wide
"DTS
Digital
Digital
patents issued and pending. "DTS" and
Digital
Surround"
Theater
Theater
registered trademarks of
Copyright 1996, 2003
Inc. All rights reserved.
are
Systems,
Systems,
Inc.
5
PBC:
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
Disc-related terms
DVD±R/DVD±RW
DVD -R and DVD +R
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
re-writable media,
are
only
two standards for
meaning the DVD content can be
Single-sided discs can hold
erased and re-recorded.
4.38
Gigabytes
much. There
and double-sided discs hold twice
are no
dual
layer single
version 2.0 disc formats. PBC allows you to interact
system via menus, search functions, or other
with the
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
CDs.
as
sided recordable
(DVD video discs only)
generally a distinct section of a DVD disc. For
example the main feature could be title 1, a documentary describing how the film was made could be title 2,
Title
discs.
A title is
VCD
and cast interviews could be title 3. Each title is
(Video CD)
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along
with
quality
stereo sound.
MPEG
assigned
easily.
an
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
Chapter (DVD video discs only)
chapter is a segment of a title such
film
popular compression format used for digital
files that yields very high near-CD quality.
WMA
Windows media audio file. A
developed by
Microsoft
type of coding / decoding
Corp.
you to locate it
as a scene
series. Each
in
a
is
chapter
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
a
may not be recorded.
On
a
interview in
or one
Scene
MP3
audio
enabling
A
MPEG is
MP3 is
reference number
a
(VCD)
video CD with PBC
(playback control) functions,
pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
moving pictures
and still
Track
JPEG
Joint Pictures
Expert Group.
file format that allows you to
on the number of colors.
JPEG is
save
compressed
images with no limit
a
or a
track of video
DivX is the
name
on
of
a
the
revolutionary
new
standard for video.You will be able
using
new
video codec
MPEG-4
compression
to play DivX
this DVD/VCR Combi receiver.
of audio.
as
musical
piece on a video or audio CD.
assigned a track number, enabling you
to locate the track you want. DVD discs allow
which is based
6
(DVD),
Each track is
DivX
movies
A distinct element of audiovisual information, such
the picture or sound track for a specific language
(with multiple angles)
one
and several tracks
Front Panel
Ejects
OPEN/CLOSE
Opens
or
closes the disc
PAUSE/STEP(X/C)
(Z)
tray.
Pause
playback
Press
or a
disc in the DVD
or
for
temporarily.
frame-by-frame playback.
STOP
a
disc
PLAY
(B)
Stops playback
Tray (DVD deck)
a
tape
a
repeatedly
remote control here.
Insert
of
VCR deck
Remote Sensor
Point the DVD/VCR Combi receiver
Disc
EJECT(Z)
tape in the VCR deck.
the
To
play
back
disc here.
a
recorded
of
tape
or
(x)
tape.
disc.
or
REC/ITR (z)
normally or to
Timer Recording.
To record
activate Instant
Cassette
FM/AM
To
change
between AM
Insert
a
Compartment
(VCR deck)
video cassette here.
and FM bands.
PROG.
window
Display
DVD/VCR
Select
on
(output select)
of your output sources to view
the TV screen between DVD and VCR.
one
PROG./PRESET
(+/-)
through memorized channels or
to control tracking during playing back a tape (VCR mode).
To tune in the desired station (Radio Mode).
To
scan
up
or
down
INPUT SELECT
Select the VCR deck's
VIDEO IN/AUDIO IN
source
(Tuner, A1,
A2
or
AV3)
(Left/Right)
Connect the audio/video
output of an external
system, TV/Monitor, Another VCR).
source
Reverse SKIP/SCAN
DVD: Go to
chapter/track.
beginning
of current
chapter/track
Press and hold for two seconds for
VCR: Rewinds the
tape during the STOP mode
or
a
for fast
fast
or
to
(S/Q)
previous
reverse
reverse
search.
picture
search.
Forward SKIP/SCAN
DVD: Go to NEXT
chapter/track.
(R/T)
Press and hold for two seconds for
a
fast
forward search.
VCR: Advances the
tape during the STOP mode
forward
or
picture
for fast
search.
VOLUME Control
STANDBY/ON
Switches the DVD/VCR Combi receiver ON and OFF.
Turn the knob clockwise to increase volume,
counterclockwise to decrease the volume.
7
Display
Indicates current
A disc is loaded in the DVD deck.
audio stream.
loaded in the DVD
(Lights
when
a
Window
disc is
deck.)
WMA disc inserted
DVD/VCR Combi receiver is in VCR timer
mode
Indicates the unit is
radio mode.
or a
VCR timer
recording
is
recording
programmed.
DVD to VCR copy is in progress.
DVD/VCR Combi receiver is
Indicates current
surround mode.
a
tape.
Indicates the unit is
playing
Lights up when the FM
station tuned is transmitting
Recording
back
a
tape
recorded in Hi-Fi.
RDS data.
MUTE indicator
Programmed
playback active
A cassette
is loaded
in the VCR
deck.
DIGITAL
PCM WMA
PHOTO
dts
VCD
ST
II PROG
PROLOGIC
RADIO
CHP/TRK
Hi-Fi
DVD RDS
MP3 TV
RPTALLAB
Total
Indicates current
track number
chapter,
or
channel number.
Indicates the unit is TV mode.
MP3 disc inserted.
Repeat playback
mode indicators.
VCD disc inserted.
DVD disc inserted.
Lights
up when
a
JPEG disc inserted.
8
stereo broadcast is
being
received in radio mode.
playing time/Elapsed time/
Frequency/remaining time/ Current
deck status/Surround mode/Volume
etc. indicators.
Remote Control
POWER
OPEN/CLOSE,
Switches DVD/VCR Combi receiver ON and
-
OFF.
-
0-9 numerical buttons
Selects numbered
in
options
a menu.
EJECT
OPEN/CLOSE
POWER
PROGRAM
Accesses
Program
or removes
Removes
Select the
FM/AM
VCR
on
the
as
on
the
AV
AV
CLK/CNT
in the
option
menu.
(b/B):
CLEAR
SOUND MODE
AUDIO
DISPLAY
CLK/CNT
RDS
menu.
REC/ITR
Records
normally
or
Timer
DVD: Search
TUNING-
SET UP/ i
backward*/go to beginning
chapter or track or go to
previous chapter or track.
TUNING+
or
for fast
picture
DISC MEUN
DVD: Search
VCR: Advances the
or
(>)
forward*/go to next
chapter or track.
tape in STOP mode
for fast forward
picture
REC/ITR
BACKWARD
Marks any
FORWARD
playback or recording
temporarily/press repeatedly for
frame-by-frame playback.
PLAY
Starts
STOP
PAUSE/STEP
Displays
PLAY
a
DVD
Selects
MARKER
SEARCH
S-TITLE
MUTE
ANGLE
REPEATA-B
REPEAT
TV/VCR
CM SKIP
SPEED
TITLE
ZOOM
search
a
subtitle
language.
silence the
speaker
of the
DVD/VCR Combi receiver.
TV/VCR
Switch between your TV's tuner
and the VCR's internal tuner.
ZOOM
DVD video
image.
Displays
the disc's Title menu,
if available.
REPEAT A-B/SPEED/REPEAT
-
if
-
available.
picture
menu.
TITLE
-
CM SKIP
Fast forwards
MARKER SEARCH
MUTE
Enlarges
RAMDOM
(G)
angle
point during playback.
Momentarily
playback.
camera
volume.
S-TITLE
ANGLE
Selects
DVD disc.
(+/-)
SEARCH
(X)
Pause
into
MARKER
(A)
Stops playback.
PAUSE/STEP
menu on a
Adjusts speaker
seconds.
STOP
frequency
-Displays functions on the TV screen.
-Acknowledges menu selection.
VOLUME
PR/TRK/PRESET
search.
*Press and hold button for about two
radio stations
a
DISC MENU
seconds.
FORWARD
display the programme menu for
ShowView programming.
SET UP/ i
Access or remove setup menu.
Accesses
search.
*Press and hold button for about two
(PS).
the tuner.
RETURN
tape in STOP mode
reverse
SHOWVIEW
ENTER
of current
VCR: Rewinds the
or an
To check the RDS service programme
-Enter
OK
MEMORY
Recording.
(.)
language (DVD)
(CD).
OK/MEMORY/ENTER
(z)
activates Instant
BACKWARD
audio
an
audio channel
To
PR/TRK/PRESET
RETURN
setup
Introducin
source
AV3).
RDS
SHOWVIEW
To tune in the desired radio station.
Removes the
or
bands)
SOUND MODE
Selects
PROGRAM
PR/TRK/PRESET(v/V):
onscreen.
AV2
and AM
AUDIO
Select programme of VCR or Tuner
Adjusts manually the tape's picture
TUNING
(FM
BYPASS,
LOGIC, PRO LOGICII (MOVIE,
MUSIC, MATRIX) and 3D SURROUND.
(left/right/up/down)
an
choice.
PRO
Switches among the clock, tape counter
tape remaining modes on the display.
Selects
or
screen.
Selects sound mode between
display.
and
b/B/v/V
listening
(Tuner, AV1,
tuner memory.
Accesses On-Screen
the
Selects the VCR deck's
menu.
preset stations from the
DISPLAY,
(CD/DVD
source
the TV
on
Select the DVD/VCR Combi receiver's tuner
track number
Press to clear
output
to view
FM/AM Tuner select button
CD/DVD
program menu or a mark
MARKER SEARCH
a
(Z)
CD/DVD/VCR select buttons
VCR)
menu.
CLEAR
EJECT
Opens and closes the disc tray.
Ejects the tape in the VCR deck.
Repeat chapter, track, title,
Repeats sequence.
Selects recording speed.
all.
through 30
recording.
seconds of
Play
RANDOM
tracks in random order.
Note
This remote control
To
use
To
use
use
the
same
buttons for VCR and DVD functions
(ex. PLAY).
the
VCR, first press the VCR button.
the DVD, first press the CD/DVD button.
9
Rear Panel
AC Power Cord
Plug
ANT.IN
into the power
source.
Connect the aerial
EURO AV2 DECODER
(VCR
IN+OUT/DVD
Connect to
pay-TV
this
jack.
RF. OUT
OUT)
Connect to
decoder
a
TV with RF cable.
FM ANTENNA CONNECTOR
another video recorder.
or
using
Connect the FM antenna to this
terminal.
EURO AV1 AUDIO/VIDEO
Connect to your TV set
(VCR
IN+OUT/DVD
OUT)
another video recorder.
or
S-VIDEO OUT
Connect to
a
S-Video
(DVD OUT)
Input on TV.
FOR DVD VIEWING ONLY.
SPEAKER CONNECTORS
Connect the six
supplied speakers
to these terminals.
AM ANTENNA CONNECTORS
Connect the AM antenna to this terminal.
Do not touch the inner
Electrostatic
discharge
Remote Control
of the
pins
may
cause
jacks
Point the remote control at the remote
Angle:
remote
the
rear
panel.
sensor
to the unit.
Remote control
Operation Range
press the buttons.
Distance: About 6m
remote
on
permanent damage
and
battery
Detach the
installation
battery
cover on
the
rear
of the remote control, and insert two
(20ft)
from the front of the
AAA AAA
R03
sensor
(size AAA) batteries
aligned correctly.
with
and
About 30° in each direction of the front of the
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
10
Installation and
TV& Decoder
Setup
(or another VCR Connections)
Decoder
(or another VCR)
A
InstaliodSeup
D
S
R
E
SI
SCART INPUT
AERIAL
Rear of TV
?
Make
on
of the following connections, depending
capabilities of your existing equipment.
one
the
Basic connections
1.
Tips
Depending
?
door aerial to ANT.IN
on your TV and other equipment you
wish to connect, there are various ways you could
connect the DVD/VCR Combi receiver. Use one of
2.
Combi
S-Video connection
Connect the S-VIDEO OUT
ed
sure
directly
the DVD/VCR Combi receiver is connectto the TV. Select the correct AV
input
on
using
on
Do not connect your DVD/VCR Combi receiver to
TV via your DVD/VCR Combi receiver. The DVD
image
could be distorted
by
the copy
protection
system.
Basic connections
the S-Video cable
the DVD/VCR
jack
the TV
The
signal
of S-VIDEO OUT
jack
will
output only
when the function mode is selected to CD/DVD.
?
When you connect the DVD/VCR Combi receiver to
your TV, be sure to turn off the power and unplug
both units from the wall outlet before
(AV)
on
(S).
Notes
?
1.
jack
Combi receiver to the S-VIDEO IN
your TV.
?
supplied RF cable (R) from the
jack on the rear panel of DVD/VCR
receiver to your television's Aerial Input.
RF. OUT
make the best connections.
Make
out-
Connect the
Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
Caution
?
(A) from your indoor/
jack on the rear panel of
DVD/VCR Combi receiver.
the connections described below.
?
(RF)
Connect the aerial cable
making
any
connections.
Connect the EURO AV1 AUDIO/VIDEO
on
the
panel of the DVD/VCR Combi receiver to the
scart input socket on the TV using a SCART lead
(E).
rear
2.
You
can
VCR)
connect such
a
Decoder
(or
another
to the DVD/VCR Combi receiver
(D).
11
Progressive Scan (ColorStream
pro)
connection
Connect the EURO AV1 AUDIO/VIDEO socket
on
the
Rear of TV
DVD/VCR Combi receiver to the COMPONENT
VIDEO
INPUT(Y
Pb
Pr) jacks on
(Optional).
the TV
using
the
VIDEO
INPUT
S-VIDEO
INPUT
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
SCART INPUT
SCART to RCA cable
Y
If your television is
high-definition or "digital
ready" television, you may take advantage of the
DVD/VCR Combi receiver progressive scan output
for the highest video resolution possible.
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD/VCR Combi
Pb
Pr
a
Y(G)
Pr(R)
Pb(B)
receiver.
Notes:
?
Set the
menu
?
Progressive Mode to
progressive signal,
for
"On"
see
on
the
setup
page 24.
Once the
setting for progressive scan output is
image will only be visible on a progressive
compatible TV or monitor. If you set Progressive
entered,
scan
an
Scan to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that "NO DISC" is displayed
on
the
display
window.
2)
releasing
it. The video
standard
setting
visible
?
Rear of DVD/VCR Combi receiver
Press STOP and hold it for five seconds before
on a
Progressive
output will be restored
to the
picture will once again be
conventional analog TV or monitor.
scan
video connections
and
a
does not work with the
(yellow
VIDEO OUT
analog
jack).
Caution:
You must set the TV
setup
to
use
Output
Y Pb Pr
Select
or
RGB
option on the
signal from the
EURO AV1 AUDIO/VIDEO socket.
(See
12
menu
"TV
Output
Select"
on
page
24.)
Accessory
Audio/Video
(A/V) Connections
to DVD/VCR Combi
receiver
Connect the AV3
jacks on the
component, using the optional
DVD/VCR Combi receiver to the audio/video out
jacks
on
your accessory
audio/video cables.
InstaliodSeup
PROG.
Radio Aerial Connections
Connect the
supplied FM/AM
loop aerial
aerial for
listening
to the radio.
?
Connect the AM
to the AM aerial connector.
?
Connect he FM wire aerial to the FM aerial connector.
FM Wire aerial
AM
Loop
aerial
(supplied)
(supplied)
Notes
?
To
prevent noise pickup, keep the AM loop aerial away from the DVD/VCR Combi receiver and other components.
?
Be
sure
?
After
to fully extend the FM wire aerial.
connecting the FM wire aerial, keep it
as
horizontal
as
possible.
13
Speaker System
Connection
Connect the
the
speakers using
To obtain the best
possible
cords.
supplied speaker
surround sound,
the
adjust
speaker parameters; distance, level,
Front
Speaker
(Right)
etc..
Front
Centre
Speaker
(Left)
Speaker
Subwoofer
Rear Speaker
(Right Surround)
Rear Speaker
(Left Surround)
Notes
?
Be
sure
to match the
speaker
cable to the
appropriate
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
?
If you
front
use
speakers
with low maximum
input rating, adjust
the volume
carefully
to avoid excessive
output
on
the
speakers.
?
Do not
remove
the front
cover
of
supplied speaker.
About Ferrite Core
Be
to attach the ferrite
sure
(for connecting
This ferrite
to this
core can
core
speaker
a
core
stopper [a] of the ferrite
core
a
2
core
Wind the Subwoofer cable
(A).
ferrite
1
unit).
2. Wind the Subwoofer cable three times
core
cables
reduce noises.
How to attach the ferrite
1. Push the
to the
to open.
on
A
B
the ferrite
once on
the
Make the
(B).
as
3. Pass the others
straight
4. Close the ferrite
core
on
the ferrite
core
3
(B).
A
until it clicks.
Notes
?
Take
care
ferrite
?
not to
Attach the ferrite
comment.).
14
pinch
the
speaker
cables between the
cores.
core near
the unit
(Refer
to the
fig.3
and
B
short
length here
possible.
as
Speaker Positioning
In the
of normal
case
position
the 6
use
speakers (2
front
centre
speakers,
speaker,
2
speakers
rear
and
subwoofer).
If you want to
a
?
?
play
the excellent bass sound, DTS
digital
surround
or
Dolby Digital surround,
you should connect
subwoofer.
Front
speakers
According to your listening position set up
interval between speakers to 45 degree.
Centre
speaker
speakers
The centre
and front
speakers
the
speakers
the
ideally
are
for
distance. And
equal
same
height.
But
by hearing position
normally place
it above
set up the
or
InstaliodSeup
below the
television.
?
Rear
speakers
Place left and
behind the
right
for surround sound
position
ers
and install them at
towards
In the
a
of
case
other, and
?
playback.
wall
a
or
ceiling
smaller
set the
or
rear
listening
These
speakers
above the level of the listener's
to further
room
area.
recreate sound motion and
For best results, do not install the
disperse
above 60
-
90
ears.
atmosphere required
listening
direct the rear speak-
too far behind the
It is also effective to
the sound.
size, if the audience is
speakers
speakers
rear
cm
near
to the
rear
than the listener's
wall set the
rear
speakers opposite
each
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Rear
Speaker
Speaker
(Left)
Front Speaker
(Right)
Rear Speaker
(Right)
Speaker
(Left)
Speaker Positioning Example
15
Mini
Glossary
for Audio Stream
This unit
produce a 3D Surround effect, using 3D
technology, which simulates multi-channel
audio playback from two conventional stereo speakers
instead of the five or more speakers normally required to lis-
& Surround mode
Allows you to
can
Surround Sound
discrete channels of
enjoy 5.1(or 6)
3D SURROUND
ten to multi-channel audio from
high
audio from DTS program sources such as
DVD and compact discs, etc.bearing the trademark.
a
home theatre. This feature
quality digital
works with DVD discs encoded with
discs,
Dolby Digital
DTS
Digital Surround delivers up to 6 channels of transparaudio(which means identical to the original masters) and
results in exceptional clarity throughout a true 360 degree
ent
sound field. The term DTS is
Technology,
Technology,
a
trademark of DTS
LLC. Manufactured under license from DTS
The
Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital promark, you can
gram source. If you play DVDs with
enjoy even better sound quality, greater spatial accuracy,
and improved dynamic range.
Use this mode when
playing
nel which carries the
"
effect of
being
effect with
DOLBY
in
which
PRO
LOGIC
can
"
Dolby Digital 2 chanThis mode provides the
or
mark.
movie theatre
a
intensity
an
movie
"
or
live concert house-an
only
be obtained
SURROUND.
The
through
effect
of
(II)
Logic
II creates five full-bandwidth
nels from two-channel
sources.
This is done
output chan-
using
according
to the way it
signals
the
any
spatial properties
new
sounds
or
of the
original recording
extracts
without
is
played
recorded.
was
You
can
one
of the
enjoy surround sound simply by selecting
pre-programmed sound fields according
to
the
program you want to listen to.
Press SOUND MODE
repeatedly until the sound
display window as
mode you want appears in the
below.
Each time you press SOUND MODE button, the
sound mode is changed in the following order;
PRO LOGIC
→
→
PL2 MOVIE
3D SURROUND
→
→
PL2 MUSIC
→
PL2 MATRIX
BYPASS
When DVD is inserted.
You
can
change
the stream of DVD
(Dolby Digital, DTS,
on
the remote dur-
ing playback.
Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is
used.
an
advanced, high-purity matrix surround decoder that
and
BYPASS
Software with multichannel surround audio
PCM, etc) by pressing the AUDIO button
Pro
Logic
the
front/back/left/right movement of the sound image, as well as
the sense of fixed position in the sound image, is much clearer and more dynamic than before.
Dolby
Pro
Sound Mode
LLC.
"
Dolby
audio tracks.
adding
tonal colorations.
Each time you press AUDIO button, the sound mode of DVD
changed as the following order;
is
→→→
MOVIE mode:
The Movie mode is for
use
with stereo television shows and
all programs encoded in Dolby Surround. The result is
enhanced soundfield directionality that approaches the
quality
of discrete 5.1-channel sound.
For your reference
?
The Music mode is for
and
provides
a
with any stereo music recordings,
wide and deep sound space. The Music mode
use
settings
?
includes controls that allow the sound to be tailored to individual
listening
The DVD/VCR Combi receiverr memorizes the
last mode
MUSIC mode:
tastes.
for each
individually.
encoding format of
program software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled
with the
logo.
DTS Digital Surround discs are marked with DTS.
You
can
identify
source
the
-
MATRIX mode:
-
The Matrix mode is the
same as
the Music mode
the directional enhancement
to enhance
mono
logic is
signals by making
except that
turned off. It may be used
them seem "larger." The
Matrix mode may also find use in auto systems, where the
fluctuations from poor FM stereo reception can otherwise
cause
disturbing
surround
signals
ultimate "cure" for poor FM stereo
force the audio to
16
mono.
from
logic decoder. The
reception may be simply to
a
-
Note
?
When you
play sound tracks with 96kHz sampling
frequency, the output signals will be converted to 48kHz
(sampling frequency).
Before
in
Tuning
Operation-VCR part
video channel
a
on
your TV
7.
Notes
?
The
You
used
already
by
8.
8 will
your DVD/VCR Combi receiver. Stages 5
show you how to change the output frequency of
your DVD/VCR Combi receiver.
our
TV receives
signals
to select another video channel.
can
a
TV channel number
on
which you wish to
Press
STANDBY/ON on the front of your
DVD/VCR Combi receiver when you have finished.
Tune this channel so that a bright blue screen
from the video recorder
like another TV station. You have to select
Select
watch video's.
~
(VCR)
-
ence
another TV station, or if the picture is
distorted, you can change the transmitter channel of
?Y
+ or
also set it to "OFF" if there is any interferwhen your TV is connected to the DVD/VCR
Combi receiver with a SCART lead.
output frequency of this video recorder (VCR) is
set at UHF channel 36. If channel 36 is
Press PROG.
You may select any channel number between 22
and 68.
appears. Store this channel
a
on your TV and tune it in so that
you may watch video tapes. If you have used a
SCART cable then your TV should already have a
your TV.
on
channel number
dedicated video channel built into
it, usually
Make
VCR
that you have correctly installed your
described earlier in this book.
sure
as
Press POWER to turn
receiver. Turn
2.
Insert
on
video
DVD/VCR Combi receiver and press PLAY on the
a TV channel number on
which you wish to watch video's.
Don't worry if you don't have a video-tape to
play
at this
stage! If you switch your DVD/VCR Combi
receiver on and continue stages 3
4, instead of
~
seeing
a bright
3.
blue
playback
tune your TV until you
For the
following steps we do assume that you have
connected your video recorder for the very first
time. In this case the video recorder is on after mains
just
connection. You should not touch any buttons
the connected TV you will now see.
Note
1.
picture
is
sharp
and the sound is clear.
If you have used a SCART cable you will not
have to tune your TV, simply select the AV
channel. The AV channel is
4.
-
If this
menu
recorder
see
was
not
appear,
your
video
programmed already.
video
playback
on
already pre-tuned
for
Select the
country according to your area with
FandG.
"A": Austria, "B": Belgium, "CH": Switzerland, "D":
Germany, "DK": Denmark, "E": Spain, "F": France,
"I": Italy, "N": Norway, "NL": Netherlands, "P":
Portugal, "S": Sweden, "SF": Finland, "OTHERS":
your TV.
Store this channel on your TV.
You will need to look at the TV instruction book if
you do not know how to do this.
5.
does
yet. On
screen.
Tune this channel until the video
optimum
a
your TV. If you do not
tune in a dedicated video channel on your TV you will
be unable to view and record video tapes!
on
Initial preset
tape into your
remote control. Select
video
sure that you have correctly installed your
DVD/VCR Combi receiver and successfully tuned in
your DVD/VCR Combi
your TV.
pre-recorded
a
on
Make
dedicated video channel
called AV.
1.
Notes
8 if you cannot
carry out stages 5
obtain clear video playback as described in
4. Select a TV channel number on
stages 1
which you wish to watch video's.
Make sure that your DVD/VCR Combi receiver is
in standby pressing POWER on the remote control
(only the clock will be displayed).
Only
A
BD
CH
NN L
DK
E
F
PSS FOTHERS
~
Pr-12
ACMS
~
6.
Press PROG.
2.
Press OK to start the automatic
storing
channels of the TV stations in your
01
C02
00
of the
area.
RAI1
the front of your DVD/ VCR
Combi receiver for more than 4 seconds.
+ or
-
on
RF36 will appear in the display window.
following picture will be displayed on the TV
The
Pr-12
screen.
S
E
ACMS
RF
CHANNEL
36
PSET
R
17
the clock
Setting
To
Manually
s et
the colour system
The clock in your DVD/VCR Combi receiver
controls time and date settings for your
1.
Press i.
DVD/VCR Combi receiver. The clock is set auto-
2.
The main
3.
Press 1
or
2 to select the SYSTEM and press OK.
4.
Press 3
or
4 to select
matically during ACMS (Automatic Channel
Memory System) when your DVD/VCR Combi
receiver detects
Teletext
channel that broadcasts
a
If the broadcast
signal.
the clock will not be set and will
a
menu
will appear
on
the TV
according
screen.
to the COLOUR
system used.
signal is weak
require setting
manually.
1.
Press i.
Press 1
or
2 to select TIME DATE.
VCR
REC
Press OK.
ON
OFF
The auto
pressing
mode
adjust
D
Dr.
NIC
fOSD
be set to "OFF"
can
E if you want to set the time
or
4:3
DER
OPR
by
manually.
5.
Press OK.
Press 1
or
2 to select the RF AUDIO.
Press 3
or
4 to select
according
to the RF AUDIO
used.
AUTO
ADJUST
:
ON
TIME
DATE
VCR
REC
ON
OFF
6.
HHMNDDMMYY
:.
-
-
--
--
--
---
.
TIME
DATE
2.
Use the numbered buttons
to alter the
on
the remote control
HOURS, MINUTES, DAY,
MONTH and
YEAR.
Please note your DVD/VCR Combi receiver
uses a
24 hour clock. e.g. 1pm will be displayed as 13:00.
The day of the week will appear automatically
when you enter the year.
HHMNDDMMYY
8
:.
00101
.
THU
TIME
DATE
3.
If you make
a
correct details.
4.
18
Press i.
mistake press 1
or
2 and enter the
Press i to
Dr.
E
NIC
fOS
4:3
remove
DER
OPR
the
menus
from the TV
screen
How to
the main
use
This DVD/VCR Combi receiver
the
programmed by using
screen.
The
menus are
Tuning
menu
easily be
displayed on
can
menus
controlled from the Remote
Control Handset.
1.
Switch
2.
Press i button.
menu
will appear
on
the TV
Automatically
If the TV broadcast signal is weak your
DVD/VCR Combi receiver may not detect the
necessary information and will not be able to
store them
your TV set and DVD/VCR Combi
receiver by pressing the POWER button.
on
The main
in TV Stations
please
correctly.
To
overcome
this
problem
turn to the MANUAL TUNING section on
page 20.
screen.
1.
Press POWER to turn
your DVD/VCR Combi
on
receiver.
2.
Press i button.
The main
ACMS
TIME
DATE
16:9
4:3
DECODER
OPR
fOSD
ON
OFF
?
SYSTEM
Press 1
Dr.
will appear on the TV screen.
2 to select the ACMS. Press OK.
menu
VCR
Pr-12
PSET
R
or
NIC
REC
Timer
recording setting (see
p.
30).
12
?
PRSET
Pr-12
PSET
R
REC
Manual
?
tuning setting (see
p.
ON
OFF
20).
VCR
TIME
DATE
SYSTEM
Dr.
Pr-12
NIC
fOSD
DECODER
16:9
4:3
OPR
ACMS
ACMS
(Automatic Channel Memory System)
(see right column).
?
TIME DATE
A
Date & clock
?
setting (see
System (see
p.
18).
3.
a problem with
(see p. 42).
display
your DVD/VCR Combi
the
operational mode
(see p. 42).
of your DVD/VCR
16:9/4:3
To select the
?
DECODER
-
use a
pay-TV
?
(see
p.
43).
OPR
To
improve
the
NIC
To activate
(see
p.
or
2 to select COUNTRY.
playback picture (see
p.
deactivate the NICAM
digital
when automatic
If the clock is wrong please
manually" on page 18.
decoder with your
DVD/VCR Combi receiver
?
or
automatically
aspect ratio of your TV (see p. 43).
To
Press 1
process.
The DVD/VCR Combi receiver's clock will be set
Combi receiver
?
F
(A:Austria, B:Belgium, CH:Switzerland,
D:Germany, DK:Denmark, E:Spain, F:France,
I:Italy, N:Norway, NL:Nertherlands, P:Portugal,
S:Sweden, SF:Finland, OTHERS)
Press OK again to start the automatic tuning
fOSD ON/OFF
To
E
Pr-12
To check
?
DK
PSSFOTHERS
ACMS
Dr.
receiver
BD
CH
NNL
18).
SYSTEM
To set the Colour TV
?
p.
27).
tuning has finished.
"Setting the clock
see
01
C02
00
RAI 1
02
C03
00
RAI 2
03
C04
00
RAI 3
sound
S
43).
E
Pr-12
ACMS
Tip:
You
change the menu language on the DVD
setup menu. (See the Menu Language on page 23.)
3.
can
Press 1
or
2 to select the desired
Press OK and press 3
4.
Press i to return to
a
or
TV
Press i to
remove
the
menus
from the TV
screen.
Press i to
save
your
settings.
menu.
4 to select.
picture.
4.
02
C03
00
03
C04
00
RAI 3
04
C05
00
TVE
05
C06
00
06
C07
00
CNN
07
C08
00
TMC
08
C09
00
PSET
R
RAI 2
HRT
YLE1
MOVE
:
DELETE
:
,
19
in TV Stations
Tuning
In certain
areas
5.
Manually
of the country broadcast
Press 2 to select STATION
signals
The TV station
may be too weak for your DVD/VCR Combi
receiver automatic tuning process to find or
assign TV stations correctly.
that you may
list will appear.
name
RAI 1
RAI 2
RAI 3
in order for your DVD/VCR
Combi receiver to store them.
PR
CH
MFT
09
C10
00
HRT
CNN
manually
TMC
YLE1
PSET
R
1.
name
TVE
You must tune in these weaker broadcast
stations
so
your TV station.
Press OK.
OK i
Press i.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
screen.
6.
Press D
or
E to select
station
a
name
from the list.
Press OK to select it.
Press OK.
PR
01
CH
MFT
STATION
C02
00
PR-01
If your station
name
isn't
OK, but go
stage
7.
to
on
the list do not press
RAI 1
PSET
R
fOSD
ON
OFF
Pr-12
ACMS
+
16:9
4:3
TIME
DATE
SYSTEM
RAI 3
Dr.
PSET
R
NIC
-
DECODER
RAI 2
VCR
12
REC
CHANNEL/CABLE
OKi
OPR
:
PSET
R
AV
TVE
i
PR
CH
MFT
09
C10
00
HRT
CNN
TMC
2.
Press i.
YLE1
The station table will appear.
Press 3 or 4 to select the programme number
that you want to tune
PR
(for example,
PSET
R
7.
09).
You
can
OK i
change a TV station name manually
using the "standard" names.
rather than
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
Press G.
or
station
new
Press 1
or
4 to select letters and numbers for
name.
2 to
move
back and forth between
characters.
OKi
,
Press 3
the
Press OK.
3.
Press OK.
Press AV to select C
(Standard stations)
or
S
(Cable stations):
C02
-
C69, S01
PR
-
S41.
C09
CH
MFT
STATION
C10
00
RAI 2
Enter the channel number of station that you want
to tune with the numbered buttons
to find the
required
or use 3 or
4
PSET
R
8.
Press i, confirm the station
Press i again.
Your
PR
CH
09
C--
MFT
STATION
--
----
CHANNEL/CABLE
:
PSET
R
new
TV station has
Searching
will
If you wish to
1
8.
stages
AV
manually
stop
4 to
when it locates
a
station.
10
11
12
13
15
adjust.
16
PSET
R
PR
01
CH
MFT
STATION
C02
00
PR-01
CHANNEL/CABLE
PSET
R
20
tune other stations
-
14
or
been tuned into your
i
Press 2 to select MFT.
Press 3
now
placement.
DVD/VCR Combi receiver.
09
4.
OK i
station.
:
AV
i
C10
RAI 2
00
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
MOVE
:
DELETE
:
,
OKi
repeat
Changing
After
the order of TV Stations
TV stations into your DVD/VCR Combi
change the order in
tuning
TV Stations
Deleting
After
TV stations into your DVD/VCR Combi
tuning
receiver you may wish to
receiver you may wish to delete a station.
which
The instructions
they are stored without having to retune them
against! The instructions given on this page will
show you how you can simply move them into
your desired order.
1.
how
1.
Press i.
The main
Press 1
Press i.
The main
Press 1
easily
will appear on the TV
2 to select the PR SET.
menu
or
given on this page will show you
delete any unwanted TV stations.
will appear on the TV
2 to select the PR SET.
menu
or
screen.
Press OK.
screen.
Press OK.
PR
CH
MFT
STATION
00
PR-01
01
VCR
Pr-12
ACMS
TIME
DATE
DECODER
OPR
REC
PR
CH
MFT
STATION
00
PR-01
01
Dr.
CHANNEL/CABLE
NIC
fOSD
ON
OFF
SYSTEM
16:9
4:3
:
AV
PSET
R
VCR
Pr-12
REC
ACMS
ON
OFF
2.
TIME
DATE
SYSTEM
Dr.
CHANNEL/CABLE
NIC
fOSD
16:9
4:3
DECODER
:
AV
2.
PSET
R
OPR
Press 3
or
4 to select the programme number
you want to delete.
Press i.
Press 3
Press i.
4 to select the programme number
you want to move (for example, PR 03).
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
P SET
R
Press 3
PR
03)
or
Press 2.
3.
(for example,
:
DELETE
:
or
C02
00
02
C03
00
PR-01
PR-02
03
PR-08
MOVE
01
04
C05
00
PR-04
05
06
C06
C07
00
00
PR-05
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
P SET
R
3.
PR-07
PR-08
MOVE
:
DELETE
:
,
Press 1.
After
a
short while, the selected station will be
deleted.
PSET
R
,
02
4 to select
the programme number you want to
example, PR 05).
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
PR-02
PR-04
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
04
move
to
01
(for
C02
00
PR-01
02
C03
00
PR-02
04
C06
00
PR-04
05
06
C04
C07
00
00
PR-05
PR-06
07
C08
00
08
C09
00
PR-07
PR-08
MOVE
DELETE
P
SET
R
:
:
,
05
4.
Press i to
remove
the
from the TV
menus
If you wish to delete other TV stations
stages 1 3.
P
SET
R
screen.
repeat
-
4.
Press OK.
The selected programme will be moved to the
new programme number.
If you wish to move other TV stations repeat stages 1 4.
Press i to remove the menus from the TV screen.
01
C02
00
02
C03
00
PR-02
04
C04
00
PR-04
05
C07
00
PR-05
06
C08
00
PR-06
07
C09
C10
00
00
PR-07
PR-08
PR-01
-
08
MOVE:
DELETE
PSET
R
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
04
00
PR-02
PR-03
PR-04
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
,
How to
selecting
Stored TV stations
ways.
Press PR 3
or
:
,
Stored TV stations:
can
be selected in either of two
4 to select different stations that are
tuned into your DVD/VCR Combi receiver.
You may also directly select stations using the
numbered buttons
on
the remote control.
21
Before
Operation-DVD part
On-Screen
You
use
general playback status on the TV
can be changed using the menu.
on-screen display:
display
can
the
the
Press DISPLAY
1.
The selected item is
Press b / B to
3.
an
the
inputting
setting. You can
appropriate (e.g.
For
number).
press ENTER to execute the
PBC
1/3
b /
B,Numbers
ENTER
mode)
Numbers
Time search
highlighted.
change
the title
(or
item.
the number buttons if
use
Selection Method
Items
Track Number
during playback.
Press v / V to select
2.
Example: On-Screen Display during
playing VCD
Some items
screen.
To
Display
0:20:09
ENTER
also
b/Bor
Audio Channel
STEREO
AUDIO
functions,
some
Sound
setting.
3D SUR
b/B
Notes:
?
?
Some discs may not
shown below.
If
no
provide
all of the features
button is
pressed for 10 seconds,
display disappears.
screen
the
Example: On-Screen Display during
playing divx movie disc
on-
Selection Method
Items
Track Number
Playback
TITLE
A-B
1/9
Repeat
title
Repeat
sequence
Enter
Marker
MARKER SEARCH
123456789
a
language
Digital Audio
Output mode
prohibited
Sound
Example: On-Screen Display during
playing DVD Video
Selection Method
Title Number
1/3
b /
B, Numbers
ENTER
Number
1/12
0:20:09
Audio
language
Digital Audio
Output mode
Angle
Sound
22
B, Numbers
language
Numbers, ENTER
b/Bor
and
Subtitle
b /
ENTER
Time search
AUDIO
ABC
1 ENG
b/Bor
S-TITLE
1/3
b/Bor
ANGLE
3D SUR
MP3
language
ABC
ENG
AUDIO
b/B
b/Bor
S-TITLE
point
not available
Items
Numbers, ENTER
menu
from this
or
B,Numbers
b/Bor
1
and
Subtitle
Action
0:20:09
Audio
play
b /
ENTER
Time search
Marker Search
Resume
Chapter
1/3
Status/Restrictions
3D SUR
b/B
Initial
LANGUAGE
Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 23 to 26.
To
display
display
the
menu.
SETUP will take you back to initial
Disc Subtitle
Off
Disc Menu
Original
A second press of
2.
Use v / V to select the desired
alternate
Setup
menu
appears.
then press
to the second level. The screen shows
option
the selected item,
move
a
for the
language
as
well
as
option
then
Setup
menu
and
Use v / V to select the desired
5.
Press SETUP
InstaliodSeup
on-screen
DVD
Refers to the
recorded.
was
original language
Other: To select another
track
in which the
language, press number
corresponding 4-digit
language code list in the
enter the wrong language code,
buttons then ENTER to enter the
according
chapter.
reference
to the
If you
press CLEAR.
to the third level.
4.
Original:
disc
number
Use v / V to select the second desired
press B to
Language
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Press SETUP. The
setting for
setting(s).
Select
Select the
1.
move
Menu
Select
Disc Audio / Subtitle / Menu
Operation
the current
Move
display.
To go back to the previous level:
Press b on the remote control.
3.
Original
screen.
To go to the next level:
Press B on the remote control.
B to
English
Language
Disc Audio
and exit the Menu:
Press SETUP to
General
Menu
setting then press
ENTER to confirm your selection. Some items
require additional steps.
or
PLAY to exit the
Setup
menu.
23
5.
DISPLAY
TV
16
Aspect
Display
Mode
TV
Output
RGB
Move
TV
:
On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc tray.
See that "NO DISC" is displayed on the display window.
Select
Select when
Press STOP and hold it for five seconds before releas-
2)
DVD
Aspect
4:3
Caution:
setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
Once the
Off
Select
a
ing it. The video output will be restored to the standard
setting and a picture will once again be visible on a
conventional analog TV or monitor.
standard 4:3 TV is connected.
16:9 Wide: Select when
a
16:9 wide TV is connected.
TV
Display
Display
DVD
Mode
Mode
setting
only
when the TV
Aspect
LetterBox: Displays a wide picture with bands
upper and lower portions of the screen.
Panscan:
Automatically displays
screen
Progressive
Output
Select
Set this unit TV
works
mode is set to "4:3".
the entire
and cuts off the
the wide
portions
on
the
TV connection
Output
Select
options according
to the
type.
YPbPr: When your TV is connected with the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on
this unit.
picture
on
that do not fit.
RGB: When your TV is connected with the SCART
(RGB signal) jack.
AUDIO
Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
Each DVD disc has
progressive
a variety of audio output options.
options according to the type of
Set this unit AUDIO
audio
system you
use.
AUDIO
5.1
To turn On
Progressive
mode.
9Wide
:
Widescreen
Scan
Progressive
ENTER will set this unit to
Pressing
scan
DISPLAY
scan:
Select
Speaker Setup
DRC
On
Vocal
On
Connect
component out of this unit to the input of
your monitor/television, set your television or monitor
to
Component Input.
1. Select
"Progressive
Scan"
on
the DISPLAY
menu
then press B.
Move
DISPLAY
Select
Speaker Setup DVD
speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 39.)
5.1
TV
Aspect
Display
Select
Mode
Progressive
TV
Output
Scan
On
Off
Select
Dynamic Range
Prev.
2. Select "On"
using
Move
Enter
the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
Note:
on
the DVD
Player.
4. When the confirm
Cancel is
to
24
(DRC)
DVD
DivX
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
This allows you to listen to a movie at a lower volume
losing clarity of sound. Set DRC to On for this
without
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled if you try Progressive
Scan
Control
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic
DVD
Set to On
menu
highlighted
highlight Enter.
effect.
Vocal
as
appears on your screen
default. Use the b button
playing.
only
when
a
multi-channel karaoke DVD is
The karaoke channels
normal stereo sound.
on
the disc mix into
OTHERS
DivX(R)
The PBC, Auto
Play
and
VOD
DivX(R)
settings
can
be
changed.
VOD
DivX
You
can display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
OTHERS
PBC
Auto
On
DivX(R)
DivX(R)
Off
Play
Your
Select
VOD
Video On Demand
registration
To learn
code is
:
XXXXXXXX
visit
more
www.divx.com/vod
Move
PBC
Set
(Done)
Select
Playback
Control
(PBC)
On: Video CDs with PBC
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an
to On
or
Off.
encrypt
are
played according
are
played
to the
PBC.
Off: Video CDs with PBC
the
same
way
as
You
If you rent the DivX VOD file, it has several
limits as shown below.
Display
play
of
watch the file.
can
player will
longest playback time and
automatically.
On: Auto
Play
function is active.
Off: Auto
Play
function is not active.
VOD Rental
Do your want to
mode is set to On, this DVD
back the title
DivX(R)
This rental has 3 views left.
use one
of your 3 views now?
search for title that has the
then
the number which you
View
set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted.
Play
options
DVD
can
If Auto
file.
viewing
?
Play
move
Notes:
Audio CDs.
Auto
InstaliodSeup
The
VCD
(Yes) (No)
?
The rental has been
expired.
Notes:
The Auto
Play
function may not work for
some
DVDs.
Rental
Expired
(Done)
?
Display
the authorization
error.
Authorization Error
This
player is not authorized
to play this video.
(Done)
25
LOCK (Parental
Password
Control)
You
LOCK
Rating
Unlock
Password
New
Country
IT
Code
(Security Code)
enter
can
1. Select Password
on
2. Follow
shown left
step
"New" is
Input
Select
Some movies contain
for children to view.
that may not be suitable
of these discs contain
scenes
Many
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer
suitable
more
scenes as an
If you
1.
2.
to
control feature allows you to block
below the rating you input, there
scenes
3.
your children from being able to view
material you believe is unsuitable.
"Rating"
on
the LOCK
menu
4-digit code,
verify.
then press ENTER.
menu.
Code
the
display
the
can
Setup
clear it
a new
code
as
security
described above.
DVD
Code
country/area
whose standards
used to rate the DVD video disc, based
list in the reference chapter.
the
must
4-digit code and press ENTER. Enter it
and press ENTER to verify. If you make a
mistake before
Enter
were
a
pressing ENTER,
press CLEAR.
1.
Select
Code"
"Country
on
the LOCK
on
menu
2.
Follow
3.
Select the first character
4.
step
Shift the
2
as
cursor
shown left
(Rating).
using
v / V buttons.
using B button and select
using v / V buttons.
rating
a
from 1 to 8
using
the v / V buttons.
5.
Rating
1-8:
tions and
Rating one (1)
rating eight (8) is
has the most restricthe least restrictive.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
Notes:
If you set
the same
scenes
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
available
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
same
is
the disc.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
26
Press ENTER to confirm your
selection.
selection, then
the
then
press B.
the
second character
3. Select
using
menu.
number "210499" and the
6-digit
Enter the code of the
then
Rating, Password and Country Code
input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
access
features, you
Input
again
or
to
Press SETUP to
Country
press B.
2. To
(Rating). "Change"
by
preventing
1. Select
new
again
forget your Security
Input
then press B.
code is cleared.
parental
access
menu
If you forget your security code you
the following steps:
alternative.
The
as
4. Press SETUP to exit the
DVD
Rating
it
2
the LOCK
highlighted.
3. Enter the
Move
change password.
or
country code
Operation
a
You will
be able to load and
only
Tape
eject video
cassettes
when your DVD/VCR Combi receiver is plugged into
the mains. Your DVD/VCR Combi receiver may also
playback recordings from
Getting a better picture
When
a
or still picture press F or G.
following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
back
During playing
Playing
NTSC
cassette is inserted and
tapes (on PAL TV).
the
playback started,
automatic
tracking function works to get the best possipicture automatically. If the quality of the recording is
poor, repeatedly press 3 or 4 on the remote control or
on the front pannal to manually
press PROG. + or
adjust the tracking until any distortions have been
ble
You
reach the
can
To switch off the slow motion and shuttle, press the
desired function.
During
appear
slow motion and shuttle, the noise bars may
on the picture according to the status of
tape.
If distortions
can
them with D
or
be
in the
seen
picture,
reduce
E.
InstaliodSeup
-
removed. Press numbered 0
switch automatic
on
back
tracking
the remote control to
on
again.
sure that you have correctly connected your
DVD/VCR Combi receiver as described earlier in
this book.
your TV. Press POWER to turn on your
DVD/VCR Combi receiver. Insert the video cassette
on
into your DVD/VCR Combi receiver. The video cassette should have the window side facing up and
the
arrow
facing
away from you.
2. Press PLAY to start
playing
your tape.
video cassette which has had its
If the end of the
tape is reached, your DVD/VCR
stop playback automatically,
rewind, stop, eject the tape.
CM
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then
resume
While
normal
playback.
tape is playing press CM SKIP
control to
commercial
skip
material).
Repeatedly press
AUTO TRACKING
5 Press 150 seconds
adjust
tracking
to
give
the best
3. Press PAUSE/STEP to still
automatically
picture quality.
Press PAUSE/STEP
picture.
repeatedly to advance
a
the
down at about 1/19 times the normal
be
can
paused
for up to 5 min-
utes. After 5 minutes your DVD/VCR Combi receiver will stop the tape to prevent damaging the tape
or
ity
the remote
skip:
3 Press 90 seconds
4 Press 120 seconds
6 Press 180 seconds
OPR
(Optimum Picture Response)
automatically improves playback picture
quality by adjusting your DVD/VCR Combi receiver to
This feature
tape frame by frame.
If you press FORWARD, the picture will be slowed
playback. Tapes
(or
CM SKIP to
2 Press 60 seconds
the
on
another programme
1 Press 30 seconds
If you load a
record protection tab removed, playback of the
cassette will start automatically.
Your DVD/VCR Combi receiver will
playback.
Press EJECT.
Combi receiver will
1. Make
Turn
6. Press STOP to end
the condition of the
tape.
1. Press i.
2. Press 1
or
2 to select OPR.
3. Press OK.
your DVD/VCR Combi receiver. Still picture qualcan be improved slightly by pressing 3 or 4.
4. Press PLAY to continue
playing
your tape.
Picture search:
During playing back press either FORWARD or
BACKWARD and this will enable you to rapidly
wind the
tape (7
where you
Logic
During
are on
the
playback)
and
fast
tape.
4. Press
rewinding press and hold
picture will be
normal playback speed.
or
BACKWARD the
back at 7 times
5. Slow motion
16:9
4:3
12
12
MS
VCR
TIME
DATE
SYSTEM
Dr.
NIC
-
DECODER
OPR
i
OPR
3
or 4
repeatedly
to select:
OFF, SOFT
or
SHARP.
forwarding
or
ON
OFF
see
search:
FORWARD
played
times normal
OFF
SOFT
SHARP
f
playback, Shuttle
Please note you may
playing
a
only
set OPR when
tape.
5. Press i return to
screen.
:
27
Instant Timer
Recording (ITR)
5.
Instant Timer
Recording (ITR) start recording
a set period of time or until the
for
video cassette
runs
6.
incorporates Long
which enables you to record up to twice
the amount of time on a video cassette. For examE-180 will record up to 180 minutes using
Standard Play (SP); using LP you will be able to
record up to 360 minutes. Please note there will be
an
in
slight loss
using LP.
picture
Press REC/ITR to start
and sound
quality
7.
Make
Press PAUSE/STEP to avoid
when
Press POWER to turn
on
your DVD/VCR Combi
receiver.
3.
4.
video cassette with
up and the
Press PR
protection
tab into
arrow
facing
displayed
8.
Press STOP to end
3
or 4
EJECT will appear
If you wish to record directly from the SCART
sockets repeatedly press AV until the socket you
wish to record from is displayed.
the
(Left
&
recording
rear
from EURO AV1 SCART socket
of your DVD/VCR Combi receiver.
from EURO AV2 SCART socket
recording
rear
AV 3 for
5
recording.
of your DVD/VCR Combi receiver.
and AUDIO IN
recording from VIDEO IN
Right) sockets on the front
DVD/VCR Combi receiver.
of your
on
the TV
screen
for
a
few
If you do not wish to record on a tape (this can
happen quite easily by accident!) remove the
protection tab on the back edge of the video
record
on
tape is paused. After
Notes:
control.
the
a
seconds.
cassette.
AV 2 for
when
minutes your DVD/VCR Combi receiver will stop
recording to prevent damaging the tape or your
DVD/VCR Combi receiver.
You may also directly select programme number
using the numbered buttons on the remote
on
28
away from you.
to select the programme
number you wish to record.
AV 1 for
recording.
Press EJECT.
your DVD/VCR Combi receiver.
The video cassette should have the window side
facing
unwanted
pause mode and ITR is cancelled.
Tapes can be paused for up to 5 minutes; RECP
sure
a
recording
If you press PAUSE/STEP during ITR, this
DVD/VCR Combi receiver will enter the record
that you have correctly connected your
DVD/VCR Combi receiver as described earlier in
Insert
recording.
Press PAUSE/STEP to continue
this book.
2.
much
scenes.
will be
1.
sound
as
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
Play (LP)
a
or
RECORD will appear on the TV screen.
Press REC/ITR several times. Each successive
out.
Your DVD/VCR Combi receiver
ple
Long Play
Play.
SP will produce improved picture and
quality, however LP will provide twice
recording time as SP.
Your DVD/VCR Combi receiver allows you to make
recordings using a variety of simple methods:
immediately
Press SPEED if you wish to record in
Standard
It is
possible to record on a video cassette
protection tab removed by covering
with self adhesive
with the
the hole
tape.
Remember you can record one programme while
another by starting your instant recording,
watching
press TV/VCR to appear TV indicator in the display
window and then selecting a different channel on
your TV.
ShowView Programming
PR
ShowView
greatly simplifies entering the date,
start
and end times of a Timer
channel,
Recording by simply entering a ShowView Code.
ShowView Codes
published
guide magazines; they can vary
numbers in length.
SHOWVIEW is
are
DATE
PR-01
--
--
--
--
--
--
--
--
--
--
--
to nine
7. Press D
or
Press D
of Gemstar
IP,
or
or
--
--
--
--
--
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
SP
--
SP
--
SP
--
SP
--
SP
--
SP
IP mode determines how much
1. Make
timer event details
stored in correct SHOWVIEW order. Insert
a
selected when
necessary, to
IP mode is not
PDC/VPS is ON. Check that the
are
correct. If you wish to record
from AUDIO IN and VIDEO IN
tab into your DVD/VCR
tape speed (SP,
tape is left and
speed from SP to LP, if
complete recording the program.
video
on
the front
either of the EURO SCART sockets
Combi receiver.
off.
LP).
switches
that TV channels have been tuned and
on or
recording speed.
E to select the desired
The SHOWVIEW system is manufactured under
licence from Gemstar Development Corporation.
protection
SP
~
--
E to switch PDC/VPS
Press G to select the
a
cassette with
TIME
10 ::
11 11
in most TV
one
registered trademark
Development Corporation.
sure
12
--
on
or
from
the back of
DVD/VCR Combi receiver, press AV to select for
display (AV1, AV2 or AV3).
correct
PR
DATE
TIME
12
10 ::
111155
PR-01
SHOWVIEW NO.
--------
--
--
--
--
--
--
--
--
--
ONCE
0~9,
REC
~
--
--
--
--
--
--
--
--
--
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
2. Press SHOWVIEW.
3. Press D
or
E to select the
ONCE: To record
recording type.
once.
8. If you want to make another ShowView
repeat stages 2 7.
recording
-
WEEKLY: To record at the
same
DAILY: To record every day
Sunday) at the same time.
time every week.
and
Press i twice.
(except Saturday
If PLEASE CHECK is displayed, you have entered
incorrect information and will need to re-enter the
data. Press POWER to switch your DVD/VCR
4. Press the numbered buttons to enter the
ShowView Code of the TV programme that you
wish to record.
Combi receiver power off mode.
will appear in
the video recorder's display while your DVD/VCR
Combi receiver waits to make the recording.
If you make a mistake press F then enter the
revised number.
To watch
a
DVD
during
timer
recording standby
mode, press POWER and DVD
to switch to DVD
mode.
9. Press STOP to end
recording.
SHOWVIEW NO.
Notes
24687654
?
ONCE
0~9,
REC
Video
Programme System (VPS)
Programme System (VPS) ensures that
the TV programmes that you have programmed for
timer recording will be recorded exactly from their
beginning to end, even if the actual broadcasting
time differs from the scheduled time due to delayed
start, or if the programme is extended beyond its
scheduled time. Also, if a programme is interrupted,
for example, if a news flash is inserted, the recording will also be interrupted automatically and
The Video
5. Press OK.
If PLEASE CHECK is
displayed
it
means
that you
have entered the wrong ShowView number,
entered the ShowView number incorrectly.
If
"- -"
is displayed, you have to enter the
programme number of the station, you want to
record from.
PR
DATE
TIME
12
10 ::
111155
SP
::
SP
--
--
--
--
--
--
--
--
--
--
--
--
~
--
--
--
--
--
--
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
--
--
--
--
--
resumed when the programme continues.
signal is broadcast by the TV station and
The VPS
SP
SP
this controls the timer in the video recorder.
SP
SP
VPS should be set ON for all timer
SP
TV stations
revise.
or
G to select the
(PR, DATE, TIME,
Press D
or
settings
VPS and
that you wish to
SP).
E to enter the correct information.
are
not
recordings from
signals. It should be
broadcasting
recordings from
broadcasting these signals.
set OFF for all timer
6. Press F
these
TV stations that
29
6. Press the numbered buttons to enter the
recording using On Screen
Display
Timer
recording
start
and end times of the programme that you wish to record.
Please note your DVD/VCR Combi receiver uses a
You may set up to seven timer record events
within one month of the current date.
24 hour clock. e.g. 1pm will be displayed as 13:00.
You may also select the the start and end times by
Note
pressing
3
or
Before setting the timer make sure that you have
set the DVD/VCR Combi receiver clock correctly and
you know which stations you have tuned TV
stations on your DVD/VCR Combi receiver.
1. Insert
a
video cassette with
protection
4.
DATE
PR
tab into your
TIME
16
PR-01
190020
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
DVD/VCR Combi receiver.
The video cassette should have the window side
facing
up and the
facing
arrow
away from you.
7. Press
2. Press i.
Press 1
or 4
3
to switch PDC/VPS
Press 2 to select the
or
Press
2 to select REC.
3
or 4
to select the
IP mode determines how much
Press OK.
3. Press OK to start
speed from SP to LP, if
complete recording the program.
If all timer record events are full press 3 or 4 to
select the event that you wish to remove and
replace. Press 1 to delete the event.
PR
--
--
DATE
--
--
::
--
--
--
--
~
PR
::
--
--
~
::
--
--
--
~
--
--
--
--
--
--
--
--
--
--
--
::
--
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
DATE
TIME
16
19002000
::
PR-01
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
--
--
~
::
--
--
~
::
--
--
~
::
SP
--
--
~
::
SP
--
--
~
::
SP
--
necessary, to
IP mode is not
--
--
~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
--
SP
--
SP
--
8. Check that the timer event details
example Stations 3
Channels by pressing 3
-
You may also select
Once selected press 2.
Press POWER to switch your DVD/VCR Combi
03.
or
receiver
will appear in the display winStandby.
dow while your DVD/VCR Combi receiver waits to
make the recording. To watch a DVD during timer
4.
If you wish to record from AUDIO IN (L/R) and
VIDEO IN on the front or from the EURO SCART
sockets
on
for correct
the back of your unit, press AV to select
AV2 or AV3).
display (AV1,
PR
DATE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
press POWER and DVD
9. Press STOP to end
recording.
?
::
--
recording standby mode,
to switch to DVD mode.
Notes
If at a later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press 3
or 4 to select the event that you wish to delete or
TIME
--
--
correct.
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
9, press 0 first, then
-
the channel number; for
are
Press i twice.
4. Press the numbered buttons to enter the station
that you wish to record.
When selecting stations 1
LP).
~
--
SP
--
or
selected when PDC/VPS is ON.
TIME
--
off.
tape is left and
switches
the timer record event.
setting
on or
recording speed.
desired tape speed (SP, IP,
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
change.
Press 1 to delete the event...or
5. Press the numbered buttons to enter the date of
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press
the programme. If you press OK before entering
the date you may select one of the following
automated
recording
features. Press 1
select, then press OK
or
2 to
to confirm.
DLY To record every day (except
at the same time.
Saturday
and
Sunday)
SU~SATo record at the
PR
DATE
PR-01
--
--
--
--
--
--
--
--
--
--
--
--
--
--
30
time every week.
TIME
--
--
--
same
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
::
SP
SUMOTUWETHFRSA
--
--
--
--
~
--
or 4
?
If Timer record events
Make
3
to enter the correct information.
sure
events do not
preset times of the timer recording
overlap. If they do, the earlier
programme will
Example:
Programme
Overlap...
that the
1 is
always
be
programmed
given priority.
to start at 16:00 and end at
17:00.
2 is programmed to start at 16:30 and end at
17:30.
(In this case, Programme 1 will be recorded in its entirety, but
only the last 30 minutes of Programme 2 will be recorded.)
Programme
If Timer record events
Overlap...
Change (Deleting)
Do not
overlap programmes, since overlapping porconflicting programmes will not be recorded. Earlier recording times have priority over later
recording times as shown in the diagram.
tions of the
the Timer
Programme
If at
a later date you wish to delete or change any of
settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press D
the
E to select the event that you wish to delete
change. Press F to delete the event...or
or
Example:
Programme
1 will be recorded in its
the last 30 minutes of
Programme
entirety,
but
only
2 will be recorded.
Press OK to
change,
then press F
or
G to
or
select;
Station, Date, Start and End times and LP.
Press D
or
E to enter the correct information.
PROGRAMME 1
17:00
16:00
17:30
16:30
PROGRAMME 2
(This portion
If two
programmed
will not be
timer
recorded.)
recordings overlap
at
midnight
00:00 a.m., programme 2 will not be recorded.
31
Playing
DVD
a
or
General Features
Video CD
Note:
Playback Setup
Turn
1.
on
Unless stated otherwise, all
the TV and select the video
input
source
connected to the DVD/VCR Combi receiver.
Turn
2.
the audio
system (if applicable) and select
Moving
to another TITLE
Combi receiver.
When
disc has
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the playback side down.
another title. Press DISPLAY while
the
3.
on
input
source
connected to the DVD/VCR
Press OPEN/CLOSE to close the
4.
operations
starts
automatically.
If
playback
tray. Playback
does not start,
described
use
the remote control. Some features may also be available on the Setup menu.
a
stopped
then the
b / B to
move
You
more
than
one
title, you
can move
to
playback is
appropriate number (0-9) or use
to another title.
play any title by inputting
playback is stopped.
can
its number while
press PLAY.
In
some
cases, the disc
menu
might
appear
Moving
to another CHAPTER/TRACK
When
title
instead:
Use the bBvVbuttons to select the
title/chapter
you want to view, then press ENTER to start.
Press TITLE or DISC MENU to return to the menu
screen.
a
disc has
er
on a
more
disc has
than
chapter/track
as
one
more
than
track, you
one
chapter
can move
or a
to anoth-
follows:
or > briefly during playback to select
chapter/track or to return to the beginning
of the current chapter/track.
Press . twice briefly to step back to the
previous chapter/track.
?T o go directly to any chapter during DVD playback,
?
Press .
the next
?
Use the number buttons to select the track you
want to view and press RETURN to return to the
menu screen. Menu settings and operating procedures may differ. Follow the instructions on the
each menu screen. You also may set PBC to Off
(See
"PBC"
on
page
?
If
parental control is set and the disc is not within
the rating settings you must input the password.
(See "Lock Menu" on page 26.)
DVDs may have a region code. Your player does
not play discs that have a region code different from
player.
(two).
your
?T
o
watch
a
numberoruseb/B.
25).
Notes:
?
press DISPLAY and press v / V to select the
icon. Then, input the chapter/track
chapter/track
The
region
code for this
DVD
during
timer
player
Search
1.
The
2.
to switch to DVD
mode.
3.
player
> for about two seconds
will
now
go into SEARCH mode.
.
Press and hold .
or > repeatedly to select
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes:
mX2, mX4, mX8 (backward) or MX2,
MX4, MX8 (forward).
To exit SEARCH mode, press PLAY.
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(Stereo, Left, or Right).
ferent audio channel
32
or
the
is 2
recording standby
mode, press POWER and DVD
Press and hold .
during playback.
a
dif-
Still Picture and
Frame-by-Frame Playback
Repeat
You
Press PAUSE/STEP
1.
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
on
Press PAUSE/STEP
now
go into PAUSE
mode.
The
>
or
during
pause.
Use the .
or
> to select the
t 1/16, t 1/8, t 1/4
or
t 1/2
T 1/16, T 1/8, T 1/4
or
T 1/2
required speed:
(backward), or
(forward).
To exit Slow Motion mode, press PLAY.
3.
the current
?
Title:
current title.
?
Off
repeats the
does not
:
?
Track
?
All
Repeat
Track/All/Off
repeats the current track
repeats all the tracks on a disc.
:
Off
-
play repeatedly.
:
does not
:
play repeatedly.
Notes:
will enter SLOW mode.
player
Repeat Chapter/Title/Off
chapter.
Chapter: repeats
?
Press .
2.
-
?
Video CDs
(X) during playback.
DVD/VCR Combi receiver will
title/chapter/all/track on a disc.
during playback to select a desired
DVD Video Discs
Slow Motion
1.
a
repeat mode.
To exit still motion mode, press PLAY.
2.
play
can
Press REPEAT
Note:
?OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the repeat function (See "PBC" on
page 25).
?
If you press > once during Repeat
back, the repeat playback cancels.
Chapter (Track) play-
3D Surround
Slow motion
playback
in
reverse
is not
with
possible
To
Video CDs and DivX Discs.
produce
a
3D surround effect that simulates multi-
channel audio from two stereo
Random
audio
Press RANDOM
1.
speakers (instead of
speakers normally required for multi-channel
from a home theater system).
the five+
The unit
during playback or in stop mode.
automatically begins random playback
and RANDOM appears
on
the TV
1.
2.
screen.
Press DISPLAY
Use 3
or
4 to select the sound
The sound
Press RANDOM
2.
again
to normal.
3.
Tip:
By pressing
Random
.
or
>
during Random playback,
(track) and resumes
playback.
setup
will be
option.
highlighted.
Use1or2totoselect"3DSUR".
Time Search
To start
1.
Note:
a
option
To turn off the 3D Surround effect, select "Normal".
the unit selects another title
On
during playback.
Video CD with
menu
to
use
PBC, You
must set PBC to Off
the random function
(See
on
"PBC"
on
at any chosen time
box shows the
the
page
playing
Press DISPLAY
2.
25).
on
the disc:
The time search
during playback.
elapsed playing time.
Press v / V to select the time clock icon and
"-:--:--" appears.
Repeat
3.
A-B
Input
the
required
start time in
seconds from left to
To
repeat
1.
Press A-B at your chosen
appears briefly on the TV
a
sequence.
starting point.
"
A
*
"
4.
screen.
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
right.
Press ENTER to confirm.
Playback
starts from the
selected time.
2.
3.
Press A-B
end
"A B" appears
again at your chosen
briefly on the TV
repeat sequence begins.
screen
Press A-B
again
point.
and the
to cancel.
33
Zoom
Use
1.
to
zoom
the video
enlarge
Press ZOOM
image.
during playback
or
still
playback
to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2.
1600% size
→ screen
fit mode
→
the
can
when
the contents of DVD discs: Menus
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DISC
image appears on
you're playing a DVD movie.
Use the bBvVbuttons to
zoomed
4.
To
normal
move
through
repeatedly
playback,
?
appears
menu
may appear.
press ZOOM
the b
a
menu, the
Otherwise, the disc
screen.
subtitle
angles,
as camera
options,
and
Disc Menu
Press DISC MENU and the disc
Press DISC MENU
disc, VR disc and movie file.
Marker Search
Camera
To enter
If the disc contains
Marker
a
start
can
playback
To enter
points.
or use
Press TITLE to exit.
3.
Zoom may not work on some DVDs.
Screen fit mode is available for playing the DVD
You
number
selection. Then press
offers features such
menu
spoken language and
chapters for the title.
Notes:
?
on
the
menu
The
2.
the
CLEAR button.
or
corresponding
highlight your
Press TITLE. If the current title has
1.
picture.
resume
the
ENTER.
Press 3/4 to select between Normal, Enhanced,
and Maximum.
3.
Input
B v V buttons to
Title Menu
the way the
change
screen
Checking
100% size
Screen fit mode:
You
DVD Features
MENU.
Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→
Special
desired
point
the TV
screen
on
from up to nine memorized
at the
the disc. The Marker icon appears
to enter up to nine
on
briefly. Repeat
markers.
To Recall
or
Clear
1.
During
disc
search
menu
a
Marked Scene
press SEARCH. The marker
appears on the screen.
playback,
Within 10 seconds, press b / B to select
number that you want to recall or clear.
3.
Press ENTER and
marked
scene.
playback
a
displayed.
Angle
recorded at different
scenes
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
Changing
2.
is
menu
to exit.
camera
marker, press MARKER
a
again
marker
starts from the
Or, press CLEAR and the marker
the Audio
Press AUDIO
different audio
Language
repeatedly during playback
language or audio track.
to hear
a
With DVD-RW discs recorded in VR mode that have
both
main and
a
Bilingual audio channel, you can
(L), Bilingual (R), or a mix of
Bilingual) by pressing AUDIO.
a
switch between Main
both
(Main
+
number is erased from the list.
4.
You
on
any marker by
the marker search menu.
can
play
inputting
its number
Subtitles
Press S-TITLE
repeatedly during playback
languages.
to
the
see
different subtitle
Note:
?
The subtitle file of the DivX file is
smi,
?
If there is
no
information
not read in the DivX
34
displayed only
srt and sub.
file,
or
"
1
there is
"
or
etc.
a
code that
are
can
displayed.
Playing
Audio CD
an
or
MP3/WMA
Disc
MP3 / WMA disc
limited
?
The DVD/VCR Combi receiver
formatted
recordings
play
can
CD-ROM, CD-R,
on
or
CD-RW
?
discs.
Audio CD
?
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
or
ENTER and
playback
?
starts.
AUDIO CD
0:52:07
Program
?
Track2
Track4
?
Track5
Track6
?
PROGRAM
Edit
They
system.
should have
a
incorporate
an
should not contain
The total number of files
This DVD
Press v / V to select
folder, and press ENTER
a
the folder contents.
Press v / V to select
Playback
track then press PLAY
a
or
maximum of 8 letters
.mp3 or .wma extension.
special letters such as /
on
the disc should be
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
Operation
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
starts.
MUSIC
these
0:00:00
require certain pre-existing conditions (see
above) to ensure compatible playback.
1/12
List
Program
1-Music1
Customers should note that
2-Music2
3-Music3
required
4-Music4
5-Music5
Clear All
7-Music7
Info
PROGRAM
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
6-Music6
DISPLAY
ISO 9660 file
less than 650.
MP3 / WMA
ENTER.
an
names
Clear All
Track8
see
File
?*:"<>letc.
Track7
2.
-
-
and must
Track3
to
-
creates
1/12
List
Track1
1.
is
-
?
PLAY
player
Sampling frequency: within 8 48 kHz (MP3),
48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
within 32
MP3/WMA
with this
compatibility
follows:
as
Edit
should
always
be
sought
from the
copyright
owner.
Tip:
?
If you
are
in
file list
a
return to the Folder
on
list,
the MUSIC
menu
the v / V to
use
and want to
and
highlight
press ENTER.
?
Press DISC MENU to
?
On
PHOTO word
on
?
When
a
move
to the next page.
a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
playing
titles, you
top of the
file
can see
menu
containing
is
highlighted.
information such
the information
by pressing
as
track
DISPLAY.
35
Audio CD and MP3 / WMA Disc
Random
Features
1.
Pause
1.
2.
Press RANDOM during playback or when
playback is stopped. Random Playback begins
immediately and RANDOM appears on the menu
screen.
Press PAUSE/STEP
To return to
press
2.
during playback.
playback, press PLAY,
PAUSE/STEP again.
ENTER
To return to normal
repeatedly
or
playback, press RANDOM
disappears from the
until RANDOM
menu screen.
Tip:
Moving
1.
By pressing
to another Track
Press .
>
or
the next track
briefly during playback to go to
beginning of the
to return to the
or
current track.
2.
Press . twice
previous
3.
In
>
during
another track and
case
briefly
step back
to the
of audio CD, to go
directly to any track,
using the numbered but-
playback, the
playback.
unit selects
random
A-B
1.
To
2.
Press A-B
track.
enter the track number
tons
to
Repeat
random
resumes
repeat a sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and "A" appear on the menu screen.
again at your chosen end point. The
icon and "A-B" appear on the menu
screen, and the sequence begins to play
Repeat
(0-9).
repeatedly.
Track/All/Off
Repeat
You
1.
3.
can
play
a
track/all
on a
Press REPEAT when
disc.
playing
a
disc. The
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the
repeat
menu screen.
icon appears.
2.
Press REPEAT to select
?
?
?
a
desired
repeat mode.
To
Track:
repeats the current track
All: repeats all the tracks on a disc.
Off(No display):
does not
repeat playback
once
Track
a
3D surround effect that simulates
speakers (instead
speakers normally required for
multi-channel audio from a home theater system).
of the five+
play repeatedly.
during Repeat
produce
multi-channel audio from two stereo
Note:
If you press >
3D Surround
playback,
the
1.
cancels.
2.
Press AUDIO
on
To return to normal
playback, press AUDIO
disappears from
repeatedly
Search
1.
Press and hold .
or
> for about two seconds
The
2.
player
will
now
go into SEARCH mode.
Press and hold .
or
>
repeatedly
the
to select
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
Search speed and direction are indicated on the menu
screen.
3.
36
To exit SEARCH mode, press PLAY.
the
until "3D SUR."
menu screen.
during playback.
during playback.
"3D SUR." appears
menu screen.
the
Repeat Programmed
Programmed Playback
1.
program
1.
can
Insert
a
memory. A
2.
contain 30 tracks.
disc.
Audio CD
MUSIC
or
menu
?
Track:
?
All:
?
Off(No display):
If you press >
E
Erasing
Note:
Press PROGRAM
again, then
the Program
the
mark will
E
1.
Edit mode.
AUDIO CD
2.
0:00:00
Program
desired
repeat mode.
play repeatedly.
Track5
Track2
Track7
1-Music1
4-Music4
Track3
Track4
2-Music2
6-Music6
Track4
Track1
3-Music3
1-Music1
3.
2-Music2
Track5
once
Track from
:
playback,
the
List
Program
Press PROGRAM in the
Program
Press B to
Track
during Repeat
stop mode
to
Edit mode.
move
to the
"Program"
list.
E
Program
Track1
Use v/V to select the track that you wish to
"Program" list.
erase
from the
4-Music4
Track6
5-Music5
Track7
4.
6-Music6
Clear All
Track8
Clear All
7-Music7
DISPLAY
Audio CD Menu
PROGRAM Edit
Info
MP3/WMA Menu
Video CD: Press PROGRAM while
The program
PROGRAM to exit the
stopped.
playback
1.
is
2.
Note:
Video CD with PBC, you must set PBC to Off
the setup menu to use the programmed playback
"PBC"
on
erase
additional tracks
as
Complete Program
steps
1-2 of
"Erasing
a
Operation
List
Track from
Program
above.
complete Program
for the disc will be erased.
on
Note:
The programs
removed.
25).
page
to
Use 3/4 to select "Clear All", then press ENTER.
The
a
the
Follow
List"
menu.
Repeat
the list.
Erasing
appears. Press
menu
Press CLEAR.
on
PROGRAM Edit
(See
repeat
1/12
List
E
a
Video CD
enter
MUSIC
1/12
List
a
does not
repeat playback cancels.
0:52:07
disc. The
repeats the current track
repeats all the tracks on programmed list.
The
to exit
a
Note:
appears.
mark will appear to the right of the word
"Program" on the right side of the menu screen.
On
Press REPEAT to select
Press PROGRAM.
disappear
playing
MP3/WMA Discs:
or
AUDIO CD
2.
player
Press REPEAT when
icon appears.
The program function enables you to store your
favorite tracks from any disc in the
Tracks
are
also cleared when the disc is
VIDEO CD
List
E
Program
Track1
Track5
Track2
Track2
Track3
Track3
Track4
Track1
Track5
Clear All
Video CD Menu
3.
Select
a
track
on
the "List", then press ENTER to
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
4.
Press B.
Select the track you want to start
"Program" list.
5.
Press PLAY
or
ENTER to start.
playing
on
the
Playback begins
in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
list have
"Program"
6.
To
resume
playback,
normal
select
a
played
once.
playback
from
track of CD
programmed
(or MP3/WMA) list
and then press PLAY.
37
Viewing
JPEG Disc
a
Moving
Press .
this DVD/VCR Combi receiver you can view
Kodak PICTURE CDs and discs with JPEG files.
Using
1.
Insert
disc and close the
a
the TV
on
appears
tray. The PHOTO
or
>
once
advance to the next file
menu
JPEG
to another File
Zoom
JPEG
Use
to enlarge
page)
during viewing a picture
to the previous file.
to
or
screen.
(see
PHOTO
the
zoom
34
photo image.
Preview
List
To rotate
JPEG Folder 1
JPEG Folder 2
picture
>>>
JPEG Folder 3
Press v / V
JPEG Folder 4
JPEG Folder 5
picture
JPEG Folder 6
JPEG Folder 7
during showing
clockwise
or
a
to rotate the
picture
counter clockwise.
JPEG Folder 8
To listen to MP3/WMA music
watching picture
JPEG
2.
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list,
the v / V buttons
use
the remote to
If you want to view
v / V to
particular file, press
file and press ENTER
a
Press DISC MENU to
Slide Show
1.
move
or
to
PLAY.
files while
on
listening
the
same
containing
to MP3/WMA
disc.
the two
types of file in
player.
2.
Press TITLE to
3.
Press v / V to select
4.
Use B / V to select
move
display
PHOTO
photo
a
menu.
file.
icon then press ENTER.
will continue until
Playback starts. The playback
STOP is pressed.
to the next page.
Tip:
JPEG
Use vVbBto
display
Insert the disc
the
highlight
Viewing the file proceeding starts.
While viewing a file, you can press STOP
to the previous menu (PHOTO menu).
a
can
music files recorded
and press ENTER.
highlight
3.
on
You
To listen to
highlight
the
(Slide Show)
then
press ENTER.
only the desired music watching picture,
programmed the desired tracks from the "MUSIC"
menu and then proceed as above.
Tip:
?
There
are
(Normal)
?
three Slide
and
Speed options
(Slow).
(Fast),
: >>>
>>
On
a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word
?
>
Press
on
top of the
menu
is
JPEG disc
limited
?
compatibility
with this
player
is
follows:
as
Depending
upon the size and number of JPEG
a long time for the DVD player
files, it could take
highlighted.
to read the disc's contents. If you don't
see an on-
after several minutes, some of the
files may be too large
reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
screen
RETURN, information of file is hidden.
display
---
Still Picture
1.
2048
Press PAUSE/STEP
The
2.
JPEG
player
will
now
during
slide show.
?
go into PAUSE mode.
To return to the slide show, press PLAY
PAUSE/STEP again.
or
pixels
and burn another disc.
The total number of files and folders
press
?
the disc
Some discs may be incompatible due to a
recording format or the condition of disc.
different
?
Ensure that all the selected files have the
extensions when
?
If the files have
rename
?
File
them
names
the files
are
Windows
copying
into the CD
".jpg"
layout.
".jpe" or ".jpeg" extensions, please
".jpg" file.
as
without
able to be read
38
on
should be less than 650.
by
shown
Explorer.
".jpg"
extension will not be
this DVD
as
JPEG
player.
image
Even
though
files in
5.1
Speaker Setup
This
to
chapter includes important reference information
help you set your DVD/VCR Combi receiver.
If you connected
following settings
for the built-in 5.1 channel
how far the sound has to travel to reach your set lisThis allows the sound from each speaker
Press b / B to
1.
Press SETUP. The
2.
Use v / V to select the AUDIO
3.
setup
menu
speaker.
[0.3(1)m(ft)
appears.
option
Use v / V to select the
press B to
move
Speaker Setup option
to the third level. "Select" is
high-
6.0(20)m(ft)]
Press b / B to test the
Front Left
Speaker Setup
menu
appears.
signals
of each
the volume to match the volume of test
rized in the
Press ENTER and 5.1
time.
Test
then
lighted.
4.
-
adjust
same
the Distance of the selected
then press
to the second level.
move
to your DVD/VCR Combi
tening point.
to reach the listener at the
surround decoder.
B to
speakers
receiver, setting the Distance lets the speakers know
Speaker Setup
Make the
Distance
→
speaker. Adjust
signals memo-
system.
(L)
Rear Left
→
(R)
Center
→
Front Right (R)
Right (L) → SubWoofer.
→
Rear
AUDIO
Speaker
Volume
Distance
Test
Operation
Front L
Size
Large
dB
0
m(ft)
0.6(2)
Off
Select
Move
Return
5.
Use b / B to select the desired
6.
Adjust options using
7.
Enter
speaker.
v / V / b / B buttons.
Press ENTER to confirm your selection. Returns to
the
previous
Speaker
Select
menu.
selection
speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
a
Note:
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Size
Since the
change
speaker settings
settings.
are
fixed, you
cannot
the
Volume
Press b / B to
speaker. (-6dB
adjust the output
6dB)
level of the selected
~
39
Maintenance and Service
DVD VR format Disc
Playing
a
This unit will
play
DVD-R/RW discs recorded
using
using
the DVD-Video format that have been finalized
a
?
This unit will
play DVD-RW discs recorded using
Recording (VR) format.
Insert
a
menu
appears
disc and close the
on
the TV
tray. The TITLE LIST
When
Please
?
save
?
ENTER and
playback
Press TITLE to
move
a
track then press PLAY
or
starts.
to the list
menu.
original shipping
carton and
packing
the exterior surfaces clean
Do not
use
near
volatile
liquids
such
as
insecticide
the unit.
Do not leave rubber
or plastic products in contact
long period of time. since they
with the unit for
a
leave marks
the surface.
on
the unit
Cleaning
To clean the
Note:
Unfinalized DVD-R/RW discs cannot be
played
in this
surfaces
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
are
moistened
player.
?
the
factory.
spray
Press v / V to select
the unit
shipping
Keeping
?
before
the Unit
Handling
at the
3.
chapter
service technician.
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
screen.
DVD-VR
2.
a
DVD-recorder.
the Video
1.
Refer to the information in this
contacting
Some DVD-VR disc
RECORDER.
are
Player
made with CPRM data
does not
by
DVD
support these kinds of
discs.
Do not
or
use
thinner,
strong solvents such
these
as
as
might damage
alcohol, benzine,
the surface of the
unit.
What is 'CPRM'?
CPRM is
a
copy protection system (with scramble system)
the recording of 'copy once' broadcast
only allowing
programs. CPRM stands for Content Protection for
Recordable Media.
This
play is CPRM compatible, which means that you can
record copy-once broadcast programs, but you cannot
then make a copy of those recordings. CPRM recordings
can
only
be made
on
DVD-RW discs formatted in VR
mode, and CPRM recordings
players
that
are
only be played on
specifically compatible with CPRM.
can
Maintaining
the Unit
The DVD/VCR Combi receiver is
parts
are
dirty
or
diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For details,
please
service center.
40
high-tech, precioptical pick-up lens and disc drive
worn, the picture quality could be
a
sion device. If the
use.
contact your nearest authorized
Playing
a
DivX Movie Disc
DivX disc
as
this DVD/VCR Combi receiver you
Using
can
compatibility
is limited
?A vailable resolution size of the DivX file is under
720x576
Insert
player
play
DivX disc.
1.
with this
follows:
a
appears
disc and close the
on
the TV
tray. The MOVIE
menu
?
screen.
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
by
56 characters.
MOVIE
0:00:00
?
List
Movie Folder 1
If there is
code to express in the DivX
as
mark on the
impossible
"
file, it may be displayed
Movie Folder 2
Movie Folder 3
"
_
display.
Movie Folder 4
Movie Folder 5
Movie Folder 6
?
Movie Folder 7
If the number of the
frame is
screen
over
30
Movie Folder 8
second, this unit may
normally.
per 1
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
2.
v / V buttons
on
the remote to
highlight
particular file, press
file and press ENTER
or
PLAY.
Press DISC MENU to
?
On
is
highlighted.
encoders, like DivX
There
are
called
1-point, 2-point,
or
or
Operation
Xvid, have this option.
different levels of GMC
3-point
encoding, usually
GMC.
to the next page.
MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the menu
a
CD with
move
audio is
GMC?
Tip:
?
or
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4
Press STOP to exit.
4.
video
If the file is recorded with GMC, the unit
supports only 1-point of the record level.
*
a
a
interleaved, either
outputted.
?
If you want to view
v / V to
operate
If the video and audio structure of recorded
file is not
and
highlight
press ENTER.
3.
?
not
Playable
DivX file
z ".avi ",
".mpg ", ".mpeg
Playable
Codec format
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Playable
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 8 48 kHz (MP3),
?
-
within 32
?
48kHz
(WMA)
320kbps (MP3),
192kbps (WMA)
-
Bit rate: within 8
32
-
-
41
Additional Features-VCR part
On Screen
You may
Video Doctor
Display
easily display
the current time
or
tape
counter, amount of tape left, day, month, year, day of
week, programme channel, tape speed and operational mode of your DVD/VCR Combi receiver will
appear on the TV screen. If a recording is taking
place
these On Screen
onto the
This feature informs you that there is a problem with
your DVD/VCR Combi receiver. These error
messages will appear
1.
will not be recorded
Displays
the TV
screen.
Press i.
Press 1
tape.
on
or 2
to select Dr.
Press OK.
Press CLK/CNT to
1.
display.
repeatedly
Press CLK/CNT
display options.
tape
The
tape
VCR
to
Dr.
the
cycle through
TAPE STATUS
counter and amount of
left will appear if there is
a
tape
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
loaded.
12
PSET
R
fOSD
After 3 seconds the
Displays
will clear
majority of the
leaving only the
counter and the amount of
Press CLK/CNT
the TV
again
to
remove
ON
OFF
On Screen
clock
tape left
on
all
or
the
VIDEO DOCTOR
HEAD STATUS
REC
2.
(Self-Diagnosis)
tape
screen.
displays
2.
Pr-12
ACMS
+
16:9
4:3
TIME
DATE
-
DECODER
Press
SYSTEM
VCR
VCR
Dr.
Dr.
NIC
OK
OKi
OPR
3 or 4
to check
i
a
problem.
HEAD STATUS
from
O
screen.
PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
Tape Counter Memory Stop
The
O
Insert
displayed on the
the time by pressing
CLK/CNT on the remote control. The Digital Tape
Counter indicates the relative positions of recordings
Digital Tape Counter
display window instead of
on
1.
the
can
be
Shows the number of timer
Press PLAY
or
start
counter
recording.
will display the
3.
actual
play
Press STOP when
playback
or
recording
time
is
complete.
Press BACKWARD.
tape will rewind and automatically stop when
the counter returns to 0:00:00.
42
PR-01 26 10:00~11:00SP
Shows the current status of timer
in hours, minutes and seconds.
The
recording.
NEXT TIMER PROGRAMME
O
Press CLEAR to set the counter to 0:00:00.
2.
tape with its protection tab in place
NO. OF TIMER PROGRAMME
Press CLK/CNT.
tape
a
O2
tape.
The
NOT RECORDABLE:
Press i
recording.
Hi-Fi Stereo Sound
Wide Screen
System
Your DVD/VCR Combi receiver will record and
back Hi-Fi stereo sound. In addition it has
NICAM
play-
stereo
playback
Your DVD/VCR Combi receiver
back wide
stereo sound decoder. This allows you
digital
to record and
a
the sound in several different
ways. Video cassettes recorded on your DVD/VCR
Combi receiver will have a normal mono audio track
and two VHS Hi-Fi stereo audio tracks. These stereo
record
system, video disc
or
screen
wide
a
the correct
cast
1.
by
16:9
record and
can
play
aspect ratio programmes (16:9). To
screen
format programme
type of wide
signal
screen
successfully
must be broad-
the TV station.
Switch
your DVD/VCR Combi receiver.
on
Press i.
tracks allow you to make audio recordings in Hi-Fi
stereo or bilingual mode from a TV broadcast, stereo
audio
Compatibility
Press F
or
G to select 16:9/4:3.
Press OK.
another DVD/VCR Combi
receiver.
1.
Your DVD/VCR Combi receiver's NICAM
digital
sound decoder allows you to enjoy broadcasts
with NICAM sound, as well as standard stereo,
bilingual
and
sound. The
ON
OFF
of
particular type
sound received or that recorded will be briefly displayed on the TV screen for a couple of seconds:
mono
2.
mono
recorded
the Hi-Fi
on
tracks of the video
Both audio channels will be recorded
stereo tracks. The
primary language
on
the
mono
on
the Hi-Fi
channel
(left)
DECODER
REC
Dr.
16:9
4:3
NIC
Press D
ON
OFF
OKi
OPR
or
E
PSET
R
fOSD
repeatedly
16:9
4:3
ACMS
AUTO
+
4:3
16:9
-
DECODER
to select:
Dr.
AUTO,
16:9
4:3
i
4:3
or
back Wide-Screen
programmes
as
Wide-Screen and Normal
programmes
as
normal.
Only for playing back
recordings (4:3).
track of the video
and
recording
Operation
Normal format
16:9:
MONO
The sound is recorded
2.
SYSTEM
4:3
tape.
mono
16:9
4:3
VCR
Pr-12
TIME
DATE
-
Automatically plays
tape.
BIL NICAM
will be recorded
+
AUTO:
automatically
stereo and
Pr-12
ACMS
16:9.
STEREO NICAM
Sound is
PSET
R
12
VCR
12
REC
fOSD
track of the video
Press AUDIO
on
Only
the Hi-Fi tracks and the
for
format
tape without any separation.
repeatedly
back and
playing
recording
recordings (16:9).
Wide-Screen
until the desired audio
mode appears.
VCR
12
Pr-12
3.
The choice is STEREO, LEFT, RIGHT and
MONO. In BIL NICAM playback the primary lan-
guage is output onthe left channel and the secondary channel is output simultaneously from the
right channel when audio output is set to
STEREO.
The primary language willbe output from both
channels when the audio setting is MONO.
Please note that when adjusting the tracking
control Hi-Fi stereo sound may revert to MONO.
REC
PSET
R
fOSD
ON
OFF
3.
Press i to
To
remove
AUTO
ACMS
+
16:9
4:3
Dr.
16:9
4:3
4:3
16:9
-
DECODER
the
Wide-Screen
i
menus
from the TV
screen.
you must
connect your DVD/VCR Combi receiver to the TV
using a SCART cable.
enjoy
playback
To set the decoder
We have
already described, how to connect a
pay-TV station as CANAL+ or PREMIERE
on page 11. For the recording of an encoded station
you do not have to control anything. You just select
the station and wait shortly until the decoding will
decoder for
start.
1.
Press i.
The main
Press F
menu
or
will appear
on
the TV
screen.
G to select the DECODER.
Press OK.
2.
Press D
ON:
or
E to select.
When the decoder is connected to the AV2
socket.
OFF: When another DVD/VCR Combi receiver is
connected to the AV2 socket.
3.
Press i to return to
a
TV
picture.
43
Additional Features
Last Scene
Memory
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the
If you load
scene is
player.
memorized, the
a
disc that has the
scene
recalled.
automatically
Note:
This
player
does not memorize the
switch off the
player
before
scene
commencing
of
to
a
disc if you
the disc.
play
Screen Saver
The
screen saver appears when you leave the
DVD/VCR Combi receiver in Stop mode for about five
minutes.
Video Mode
Setting
With certain discs, the playback
flickering or Dot Crawl is shown
That
means
Vertical
picture may be
straight lines.
or
De-interlace is
interpolation
on
not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
To
change
the video mode, press and hold
during disc playback.
DISPLAY about 3 seconds
The
on
new
video mode number selected is
the TV
has
until
screen.
displayed
quality
procedure
Check whether the video
improved. If not, repeat the
picture quality is improved.
Video mode sequence:
MODE1 → MODE2 → MODE3
above
→
MODE1
If you turn off the power, the video mode will return
to initial default state (MODE1).
Detailed
MODE1
al
or
:
video
MODE2
:
Description
The
source
material)
of each Video Mode
material of the DVD video
(film
materi-
is determined from disc information.
Suitable for
playing film based content or video
by the progressive scan method.
based material recorded
MODE3
:
Suitable for
comparatively
playing
video based content with
little motion.
Note:
The video mode
Progressive
menu.
44
setting only
works when the
Scan mode is set to "On"
on
the
setup
from DVD To VCR
Copying
Recording
This unit allows you to copy the contents of a DVD to
a VHS tape with a press of the REC/ITR button.
Notes:
Be
sure
setup
to set
Scan" to "Off"
"Progressive
on
the
recorder
With this video recorder you can make recordings
from an external source, such as copying from
another DVD/VCR Combi receiver
protected,
are
attempting
to copy is copy
you may not be able to copy the disc.
3.
camcorder.
Note:
In the
one
2.
or a
menu.
If the DVD you
1.
from another video
following description,
recording and
used for
DVD/VCR Combi receiver B. The other
Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
be used for
Insert VHS Tape
Insert a blank VHS
1.
Copy
videotape
the DVD to VHS
into the VCR deck.
Tape
will
as
DVD/VCR Combi receiver A should be connected
or
on
the AV sockets
on
the
rear
panel of your
panel of your
the front
unit.
appears, you may need
button manually to begin
menu
Play
and will be referred to
to the SCART socket
unit
The DVD will go into Play mode and the
DVD/VCR Combi receiver will go into Record
mode.
If the DVD disc
playback
as
appliance
DVD/VCR Combi receiver A.
Press the REC/ITR button.
to press the
this video recorder will be
will be referred to
2.
Insert the recorded
receiver A and
a
tape into DVD/CD/VCR
tape into DVD/VCR Combi
blank
receiver B.
3.
Press AV until the socket you wish to record from
displayed. (DVD/VCR Combi receiver B)
is
copying.
AV 1 for
If you press the REC/ITR button, be sure this
DVD/VCR Combi receiver in DVD mode.
the Copy Process
When the DVD is finished
playing,
press STOP to
4.
the
rear
stop the Copy process manually
when the DVD movie ends, or the unit may
and
over
again.
of your unit.
&
recording from VIDEO IN
Right) sockets on the front
and AUDIO IN
of your unit.
To start
recording, press the REC/ITR on
DVD/VCR Combi receiver B and PLAY on
DVD/VCR Combi receiver A.
You must
over
on
(Left
end the copy.
and record
rear
AV 3 for
Stop
replay
the
from EURO AV1 SCART socket
of your unit.
AV 2 for recording from EURO AV2 SCART socket
Note:
4.
recording
on
5.
When you want to finish copying, press the STOP
on both DVD/VCR Combi receiver.
45
the Radio Stations
Presetting
You
can
tuning,
preset
make
50 stations for FM and AM. Before
sure
Preset radio stations in the DVD/VCR Combi receiver
that you have turned down the vol-
Press FM/AM
the remote control
on
front
on
memory first
(see "Presetting
radio stations"
on
the
left).
ume.
1.
to the Radio
Listening
panel until the frequency
the display and TV screen.
or on
the
1.
band appears
Press FM/AM
the remote control
on
front
on
panel until the frequency
the display and TV screen.
or on
the
band appears
The last received station is tuned in.
2.
Press 3/4
on
the remote control
repeatedly
to
select the preset station you want.
Each time you press the button, the DVD/VCR Combi
receiver tunes in
RADIO
AM
3.
at
a
time.
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on
the remote control repeatedly.
-
OK, CLEAR
,
preset station
one
01
522kHZ
To Clear the Stored Radio
Stations
1.
RADIO
FM
06
108. 00MHZ
the remote control
on
on
panel until the frequency
the display and TV screen.
or on
the
band appears
OK, CLEAR
,
2.
Press FM/AM
front
Press 3/4
on
the remote control to select your
desired radio channel.
3.
Press FM/AM
front
4.
panel
Hold down
on
the remote control
4
PRESET
hold down 1 and
the
RADIO
3
on
the front
panel
FM
or
the remote control for
station is searched for
OK, CLEAR
,
on
a
2.
Press 3/4
on
06
the remote control to select your
RADIO
87. 50MHZ
,
06
108. 00MHZ
desired station.
RADIO
5.
2
and
1 or 2 seconds,
automatically.
FM
or on
to select the desired band.
AM
OK, CLEAR
Press MEMORY
on
,
the remote control.
3.
10
522kHZ
OK, CLEAR
Press CLEAR the remote control to clear the
stored radio station.
6.
Repeat steps
2 to 5 to store other stations.
RADIO
FM
10
98. 00MHZ
,
OK, CLEAR
Note
While record
or
record pause mode, the CLEAR
function may not be
46
operated.
Tuning
1.
into
a
Press FM/AM
Station
on
Manually
the remote control
front
panel until the frequency
the display and TV screen.
on
2.
Press FM/AM
front
3.
panel
Press
1
4
on
RDS
or on
the
band appears
or on
the
to select the desired band.
on
3 on the front
panel or press
the remote control to tune in the
desired station.
Tuning
into
a
Station
Hold down 4 PRESET 3
on
Automatically
the front
on
seconds, and
station is searched for
panel
the remote control for 1
or
or
hold
2
automatically.
stop
at
a
station with
a
very
in many countries, RDS is
the
call
a
sign
Window
FM station is tuned in and it contains RDS
and the RDS indicator will
as
programme
well
as
(PS)
telephone,
display.
appear in the
example,
to
light
in the
Display
indicators for the RDS services
if transmitted
by
the station.
Display
The RDS
name.
MUTING and MUTE indicator
system for
data, the unit will automatically display the station's
system is capable of transmitting
wide
a
of information in addition to the initial call
that appears when
RDS operation the
Mute
a
Tuning
When
variety
Press MUTE to mute your unit.
You can mute your unit in order, for
answer
use
the correct time.
RDS
Note
The search may not
weak signal.
equipped with RDS (Radio Data System),
brings a wide range of information to FM radio.
transmitting station call signs or network information,
a description of station programme type text message
about the station or specifics of musical selection and
RDS
down 1 and 2
a
This unit is
which
Now in
the remote control
PRESET
and 2
Operation
Pressing
a
display
RDS
sign
station is first tuned. In normal
on
you to show the station
will indicate the station
the remote control enables
name.
Note
If the RDS services programme
(PS)
is not
transmitted, the Display Window will show
NONE
being
a
PS
message.
47
Language Codes
Use this list to
input your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
initial
settings:
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Country
Choose
a
8373
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Country
Malaysia
Code
ET
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
AR
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
AF
Country
Code
Country
Ethiopia
Fiji
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
Czech
48
following
Republic
UG
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
Cause
Symptom
Correction
No power.
The power cord is disconnected.
The power is on, but
the DVD/VCR Combi
No disc is inserted.
Insert
No
disc
Plug the power
securely.
tape is inserted.
The TV is not set to receive DVD/VCR
Combi receiver signal output.
picture.
cord into the wall outlet
disc or tape. (Check that the
tape indicator in the display
a
or
window is
receiver does not work.
No
service.
contacting
lit.)
Select the
on the TV
appropriate video input
the picture from the
mode
so
DVD/VCR Combi receiver appears
the TV screen.
on
TV/VCR mode for DVD/VCR Combi
Press the TV/VCR button
receiver is set to TV.
control repeatedly to choose VCR mode.
TV indicator disappears in the display
on
the remote
window.
The video cable is not connected
Connect the video cable
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
connected with the audio
equipment
cable is not set to receive DVD/VCR
Combi receiver
signal output.
The audio cables
are
not connected
on
the TV.
input
mode
on
the audio
receiver so you can listen to the sound from
the DVD/VCR Combi receiver.
Connect the audio cables
securely.
securely.
The power of the equipment connected
with the audio cables is turned off.
The
digital audio output
position.
is set to the
wrong
The
playback picture
is
poor.
The disc is
Tape
heads
is a rental
another VCR.
Tape
The DVD/VCR Combi
receiver does not start
playback.
on
Clean the disc.
Clean video heads.
dirty.
or was
recorded
on
Use v/V for manual
while
adjustment
Insert
disc
is inserted.
Insert
disc is inserted.
tracking
tape is playing.
disc or tape. (Check that the
tape indicator in the display
a
or
window is
unplayable
connected with
digital audio output to the
position, then turn on the
DVD/VCR Combi receiver again by
pressing POWER.
No
An
equipment
Set the
No disc is inserted.
tape
the
the audio cables.
correct
dirty.
are
Turn
a
lit.)
playable
disc.
(Check
the disc
type, color system, and Regional code.)
The disc is
placed upside
The disc is not
placed
Place the disc with the
down.
within the
guide.
Place the disc
inside the
dirty.
Clean the disc.
The
level is set.
Cancel the
rating
playback
the disc
side down.
tray correctly
guide.
The disc is
Rating
on
Rating
function
or
change
the
level.
Video Head Cleaning
Whenever a video cassette is inserted into or ejected from your DVD/VCR Combi receiver the video head is automatically cleaned. This should mean that additional head cleaning should not be necessary.
However dirt accumulating on the head after a long period of time can cause the playback picture to become
blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old
or
damaged tapes might.
49
Cause
Symptom
This remote control
The remote control is not
the same
buttons for VCR and
remote
uses
sensor
Correction
pointed
at the
Point the remote control at the remote
of the DVD/VCR Combi receiver.
The remote control is too far from the
DVD functions
There is
an
obstacle in the
path
the remote control within 23 ft
Operate
(7 m).
DVD/VCR Combi receiver.
(ex. PLAY).
of the DVD/VCR Combi receiver.
sensor
of the remote
Remove the obstacle.
control and the DVD/VCR Combi receiver.
The batteries in the remote control
the batteries with
Replace
are
new ones.
exhausted.
This remote control
The
tape does
not
the
uses
When
same
using
a
VCR, first press the VCR
a DVD, first press
buttons for VCR and DVD functions
button. When
(ex. PLAY).
the CD/DVD button.
using
The DVD/VCR Combi receiver is in the
Press PAUSE/STEP
during recording.
RECORD PAUSE MODE.
recording.
The
The
or
tape will
run
not rewind
fast-forward.
The
tape is already fully rewound
playback picture
resume
or
fast-
Check the
the RF cable for
con-
Set the TV to the Video channel
tape.
If
you're using only
nection.
(see
Noise appears
visual search.
This is normal.
Turn camcorder
during
p.
17).
on
and
operate
properly.
Noise appears during
normal playback.
The automatic
Breaks
There is
The automatic
noticeable
in Hi-Fi soundtrack.
Recording
to
forwarded.
does not appear while
the tape is running.
are
(X)
no
tracking
tracking
cannot be
The
engaged.
engaged.
Try
manual
tracking (see
p.
27).
tape loaded
Try
manual
tracking (see
p.
27).
mode is
tape loaded,
has had its record
started.
mode is
safety
or
the
tab removed.
(another VCR, camcorder)
properly connected.
source
not been
has
Insert
a
cover
the hole where the tab
tape,
or
using
adhesive
tape,
was
removed.
Tape-to-tape editing
not possible.
Timer
recording
is
won't
The clock/or the timer have been set
Confirm that the camcorder is
incorrectly.
connected.
The timer is not
work.
Re-perform
tings.
engaged.
properly
the clock and/or timer set-
Press POWER and confirm that the
The loaded
timer indicator is
tape has had its record safety
displayed
on
tab removed.
DVD/VCR Combi receiver's
Insert
a
Audio mode is not set
insert
a
properly.
the
Display.
pate with adhesive tape, or
tape with the record safety tab
intact.
Select "STEREO"
No Hi-Fi sound.
ing
AUDIO
on
by repeatedly pressthe remote control.
Moisture Condensation
Moisture condensation
can occur:
?W hen the DVD/VCR Combi receiver is moved from
a
?
cold
Under
place
to
a warm
extremely
In locations where moisture condensation may
?
Keep the
plugged into an AC
help prevent conden-
power outlet with POWER On. This will
sation.
place.
humid conditions.
?
When condensation has occurred, wait a few hours
for the DVD/VCR Combi receiver to dry before using
it.
50
DVD/VCR Combi receiver
occur:
Specification
General
Power
requirements
consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Power
Refer to main label
Refer to main label
RF-Modulator
430X81X360mm(wxhxd)
5.8 kg (17.6 lbs)
5˚C to 40˚C (41˚F to 104˚F)
24-hour display type
UHF 22-68 (adjustable)
Operating humidity
5%to90%
Timer
DVD Section
Laser
Semiconductor laser,
Signal system
Frequency response
PAL/NTSC
wavelength
650
nm
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto20kHz
CD:8Hzto20kHz
Signal-to-noise
ratio
More than 70 dB
Harmonic distortion
Less than 1.0%
Dynamic
Outputs
More than 60 dB
range
S-VIDEO OUT
(Y)
(C)
1.0 V
(analog
out connectors
(DVD, CD)
(p-p), 75 ohms, negative
(p-p) 75 ohms
0.3 V
only)
sync, Mini DIN
4-pin
x
1
VCR Section
Head
system
system
Television
Recording
format
6 heads helical
scan
PAL/B/G colour
azimuth
system
system
PAL/MESECAM
RF OUT
G
PAL/MESECAM; 23.39 mm/s (SP), 16.69 mm/s (LP)
Tape speed
NTSC
(Playback only); 35.35 mm/s (SP), 16.67 mm/s (LP),
(EP)
SP: 4 h (E-240 tape), LP: 8 h (E-240 tape)
About 180 min (E-180 tape)
VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
AUDIO: -6.0 dBm, more than 10 kohms (SCART)
-6.0 dBm, more than 47 kohms (RCA)
VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
11.12 mm/s
Maximum
recording
time
Rewind time
Input
level
Output level
Signal-to-noise
ratio
VIDEO: More than 43 dB
AUDIO: More than 72 dB
More than 42 dB
Dynamic
range
(Hi-Fi)
(Mono)
AUDIO: More than 85 dB
Tuner Section
Tuning
FM: 87.5
range
AM: 522
Intermediate
frequency
-
-
108.0 MHz
1611 kHz
FM: 10.7 MHz
AM: 450 kHz
Amplifier Section
Stereo mode
Surround mode
25W+25W(6ohmat1kHz,THD10%)
Front: 25W + 25W (THD 10%)
Centre: 25W
Surround: 25W
+
Subwoofer: 60W
25W
(8
(6
ohm at 1 kHz, THD
ohm at 30 Hz, THD
10%)
10%)
51
Speaker
Section
Satellite (LHS-CX246T)
Type
Impedance
Frequency Response
1
1
Way
Speaker
6Ω
130
20,000 Hz
-
Sound Pressure Level
85 dB/W
Rated
25W
Input Power
Max Input Power
Net Dimensions (W
Net Weight
50W
H
x
x
89x130x114mm
D)
0.54
kg
Passive Subwoofer (LHS-CX246W)
Type
Impedance
Frequency Response
50
Sound Pressure Level
82 dB/W
Rated
60W
Input Power
Max Input Power
Net Dimensions (W
Net Weight
(1m)
1
Way
1
Speaker
8Ω
1,500 Hz
-
(1m)
120W
x
H
x
160x350x333mm
D)
4.5
kg
Accessories:
AM/FM antenna,
Design
and
Speaker
cable
specifications
are
Manufactured under license from
x
5, Scart cable
subject
Dolby
to
x
change
Laboratories.
1, Remote control
52
Digital
Out"
are
trademarks of
Digital
1, Batteries (AAA)
x
2
without notice.
"Dolby",
"Pro
Logic"
Laboratories.
"DTS" and "DTS
x
Theater
Systems,
Inc.
and the double-D
symbol
are
trademarks of
Dolby
P/N: 3835RH0054V
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement