advertisement
OWNER’S MANUAL
LG Wi-Fi
Sound Bar
Please read this manual carefully before operating your set and retain it for future reference.
MODEL
SN8Y (SN8Y, SPN8-W)
2003_Rev01 www.lg.com
Copyright © 2020 LG Electronics Inc. All Rights Reserved.
1 Getting Started
1
2 Getting Started
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock.
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating.
The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.
CAUTION: No naked flame sources, such as lighted candles, should be placed on the apparatus.
NOTICE: For safety marking information including product identification and supply ratings, please refer to the main label on the bottom or the other surface of the product.
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.
Check the specification page of this owner’s manual to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your device, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the device, and have the cord replaced with an exact replacement part by an authorized service center.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.
CAUTION: Be careful to make sure children do not put their hands or any objects into the *speaker duct.
* speaker duct: A hole for plentiful bass sound on speaker cabinet. (enclosure)
CAUTION: Only use the AC adapter supplied with this device. Do not use a power supply from another device or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty.
Symbols
~
Refers to alternating current (AC).
0 Refers to direct current (DC).
Refers to class II equipment.
1 Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
Getting Started 3
1
4 Table of Contents
Table of Contents
1 Getting Started
15 Mounting the unit on a wall
2 Connecting
17 – Installing “Google Home” App
18 – Launch the app to connect Wi-Fi
19 Organizing cables (Optional)
20 Wireless subwoofer and rear speaker (Sold
20 – Wireless subwoofer connection
21 – Rear speakers connection (Sold
25 – How to Affix the Ferrite Core
28 – ARC (Audio Return Channel) function
28 – eARC (Enhanced Audio Return Channel) function
29 – Additional information for HDMI
30 Optional equipment connection
Table of Contents 5
3 Operating
33 Works with the Google Assistant
34 – Installing “LG Wi-Fi Speaker” App
35 Using a BLUETOOTH Wireless Technology
35 – Listening to Music of a BLUETOOTH Device
38 – Using your TV remote control
4 Troubleshooting
44 – NOTES to release Demo mode
5 Appendix
48 Important Information Relating to Network
1
2
3
4
5
1
6 Getting Started
Introduction
Symbol used in this manual
, Note
Indicates special notes and operating features.
> Caution
Indicates cautions for preventing possible damages from abuse.
Front panel
A
1 (Standby)
Switches the unit ON or OFF.
F (Function)
Select the function and input source by pressing F repeatedly.
Input source / Function
Wi-Fi
Bluetooth
Optical
ARC e-ARC
LG Sound Sync (Wired)
HDMI IN
Display
WI-FI
BT
OPT/HDMI ARC
HDMI
o / p (Volume)
Adjusts volume level.
-
/ (Wi-Fi)
Selects Wi-Fi function.
B Remote sensor
C -
Display Window
Display window will be darkened automatically if there is no key input for 15 seconds.
When you press any button, the display window will brighten.
Getting Started 7
1
1
8 Getting Started
.
,
Precautions in using the touch buttons y Use the touch buttons with clean and dry hands.
In a humid environment, wipe out any moisture on the touch buttons before using.
y Do not press the touch buttons hard to make it work.
If you apply too much strength, it can damage the sensor of the touch buttons.
y Touch the button that you want to work in order to operate the function correctly.
y Be careful not to have any conductive material such as metallic object on the touch buttons. It can cause malfunctions.
This unit will turn itself off to save electric consumption when the main unit is not connected to an external device and is not used for 15 minutes.
Rear panel
Getting Started 9
1
A
B
C
D
E
-
DC IN
Connect to the AC adapter.
-
HDMI IN
Connect HDMI IN jack on the back of the unit to HDMI OUT jack on the external device.
You can enjoy the sound and picture from HDMI connection on an external device.
-
HDMI OUT (TV eARC/ARC)
Connect the HDMI OUT (TV eARC/ARC) jack on the back of the unit to ARC jack on the TV.
OPTICAL IN
Connect the OPTICAL IN jack on the back of the unit to OPTICAL OUT jack on the TV.
-
USB (Service only)
S/W download connector
1
10 Getting Started
Remote control
Replacement of Battery
Remove the battery cover on the rear of the remote control, and insert the battery with 4 and 5 matched correctly.
Risk of fire or explosion if the battery is replaced by an incorrect type.
a b c d
1 (Standby)
Switches the unit ON or OFF. y Networked standby: It allows the unit to switch to standby mode.
To turn on Networked standby function, Press 1 .
To turn off Networked standby function, press 1 for about 3 seconds.
VOL (Volume) o / p
Adjusts speaker volume.
C / V (Skip)
Press C or V to go to next or previous file.
N (Play/Pause)
Starts playback. / Pauses playback.
Getting Started 11 e
SOUND EFFECT
Selects a sound effect mode by using SOUND EFFECT .
On Display
AI SOUND PRO
BASS BLAST or BASS BLAST+
STANDARD
MOVIE
MUSIC
Description
Analyzes the property of the input sound and provides the sound optimized for the content in real time.
Reinforces the bass and powerful sound.
You can enjoy premium sound with MERIDIAN technology.
You can enjoy more immersive and cinematic surround sound.
You can enjoy more good sound for music source.
, When this unit detects DOLBY ATMOS or DTS:X stream, you cannot change sound effect to any other. In this case, even though you press SOUND EFFECT , this unit does not respond. And you can see only “NOT SUPPORTED” on the display window.
y TV remote: It allows you to control the volume of this unit by your TV remote control even by other
To turn on or off the TV Remote function, press and hold SOUND EFFECT for about 3 seconds and press it again.
, Supported TV brands
LG Panasonic Philips Samsung Sharp Sony Toshiba Vizio f g h
(Sound tuning)
Adjusts sound level of each speaker.
Select the speaker you want to adjust by using and adjust the sound level by using VOL o / p .
, Adjusting rear speakers level is applied only when the rear speakers are connected.
,
See the page 13 for more information of speakers.
Display
WF
Description
Sub Woofer
Range
-15 ~ 6
C
OVC
R
TRE
BAS
Center
Overhead Volume Control
Rear
Treble
Bass
-6 ~ 6
-6 ~ 6
-6 ~ 6
-5 ~ 5
-5 ~ 5 y Surround sound:
It allows you to enjoy surround sound with rear speakers. (Page 22)
To turn on or off the surround sound, press and hold for about 3 seconds and press it again.
F (Function)
Select the function and input source by pressing F repeatedly.
[ (Mute)
Press [ to mute your unit. To cancel it, press [ again.
1
1
12 Getting Started i j k
J (Information)
You can display various information of the input source by pressing J .
Wi-Fi: Connected Application name
BT ( Bluetooth ): Connected Bluetooth device name
OPT (Optical)/ARC/E-ARC/HDMI (HDMI IN): Audio format y Auto Power ON/OFF: It allows the unit to turn on and off automatically by input signal: Optical (Page
To turn on or off AUTO POWER function, press and hold J for about 3 seconds and press it again.
*
This button is not available.
8 (Night time)
It is useful when you want to watch movies at low volume late at night. It makes to reduce the sound intensity and improve fineness and softness.
Press 8 to activate Night time mode. To cancel it, press 8 again.
Speakers position
Getting Started 13
1 d c b a b c e e a Center speaker b Front speakers c Top speakers d Subwoofer e Rear speakers
, You can enjoy surround sound by using Wireless Rear Speaker kit. Wireless Rear Speakers Kit sold separately
(SPK8-S).
1
14 Getting Started
Installing the sound bar
You can hear the sound by connecting the unit to the other device: TV, Blu-ray disc player, DVD player, etc.
Place the unit in front of the TV and connect it to the
device you want. (Pages 26 - 32)
You can place the wireless subwoofer anywhere in your room. But it is better to place the subwoofer near the main unit. Turn it slightly toward the center of the room to reduce the wall reflections.
For the best surround sound, place the speakers as shown below.
> Caution y For best performance of wireless connection such as Bluetooth or wireless subwoofer, do not install the unit on Metallic furniture because wireless connection communicates through a module positioned on the bottom of the unit. y Be careful not to make scratches on the surface of the Unit /Subwoofer when installing or moving them.
, Note y If the sound bar covers the remote sensor of the TV, please separate distance between the sound bar and TV by 10 ~ 15 cm or more.
y The illustration above may differ from actual units.
y You can enjoy surround sound by using
Wireless Rear Speaker kit. Wireless Rear
Speakers Kit sold separately (SPK8-S).
Mounting the unit on a wall
> Caution y Do not install this unit upside down. It can damage the parts of this unit or be the cause of personal injury.
y Do not hang onto the installed unit and avoid any impact to the unit.
y Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in an injury or damage to the product.
y When the unit is installed on a wall, please make sure that a child does not pull any of connecting cables, as it may cause it to fall.
You can mount the main unit on a wall.
Preparation materials
Unit
Getting Started 15
Wall bracket install guide
Wall bracket
Screws
(Not supplied)
Screws ( A )
Wall plug
, Note
Screws ( A ) and Wall Plugs are not supplied for mounting the unit. We recommend the Hilti
(HUD-1 6 x 30) for the mounting.
1
> Caution
Because it is difficult to make a connection after installing this unit, you should connect the cables before installation.
1
16 Getting Started
1. Match the TV’s BOTTOM EDGE of Wall bracket install guide with the bottom of TV and attach to the position.
5. Put the unit on the brackets to match screw holes on the bottom of the unit.
2. When you mount it on a wall (concrete), use the wall plugs. You should drill some holes. A guide sheet (Wall bracket install guide) is supplied to drill. Use the sheet to check the point to drill.
6. Fix the unit with the screws firmly.
3. Remove the Wall bracket install guide.
4. Fix the brackets with screws ( A ) as shown in the illustration below.
, Note
To detach the unit, perform it in reverse order.
2 Connecting
Network connection
You can enjoy various functions of this sound bar by connecting to network and your smart device with
“Google Home” app.
Modem
Router
Media Server
Connecting 17
Installing “Google Home” App
The “Google Home” app allows you to use various functions of this speaker through your smart device.
Requirements before setup
y A wireless router must be connected to the internet. A smart device such as Android or iOS devices must be connected to the wireless router via Wi-Fi connection.
y It needs Google account to use this app. During connect Wi-Fi, this app may request to create
Google account.
Through “Google Play” or “App Store”
1. Tap the“Google Play Store” icon or “App Store” icon on your smart device.
2. Type in “Google Home” in the search bar and tap
“Search” on “Google Play” or “App Store”
3. Select “Google Home” in the search result list to download.
2
The “Google Home” app is required to connect the sound bar wirelessly to the network.
, Note
In a network environment (Router, Internet and Internet Service Provider) that supports both IPv4 and IPv6, the network automatically connects to IPv4 or IPv6 when connecting to the network.
You can check the each network status by selecting the settings of My Speakers
([Settings]>[IP Info.]) on the “LG Wi-Fi Speaker” app.
Google Home
, Note y Depending on the device version, “Google
Home” app may not work.
y For more information, visit the web site. https://www.google.com/cast/setup/
2
18 Connecting
Launch the app to connect Wi-Fi
Make sure your smart device Wi-Fi feature is turned on. Once a connecting operation is performed, it does not need to be performed again.
, Note
In case of iOS devices, it should be turned on
Bluetooth setting on your smart device.
3. When the speaker is properly connected to Wi-Fi,
“CONNECTED” will appear on the display window with sound.
, Note y Depending on wireless router status, it might not work well Wi-Fi connection.
y It is recommended that you use Wi-Fi Group
Play with less than 5 speakers.
y “Google Home” app is provided by Google. It might be revised by a change of Google Policy.
1. Tap the “Google Home” icon to launch the app.
2. Follow the screen on app to set speaker. Follow these instructions in order.
, Note y Use the same Wi-Fi connection to set the speaker and your smart device.
y If the Bluetooth setting turned on your smart device, it will be easy to connect Wi-Fi.
y During installation, you should create a speaker name. It is needed when pairing the
Bluetooth device. You can check and edit the speaker name. Follow the “Edit speaker
Connecting 19
Organizing cables
(Optional)
You can organize the cable with cable ties.
1. Hold the cables together with cable ties as shown below.
2. Tighten cable ties.
Connecting the AC
Adapter
Connect the sound bar to the power supply with the supplied AC adapter.
1. Connect the supplied AC power cord to the AC adapter.
2. Connect the AC adapter cable to DC IN adapter input.
3. Plug the AC power cord into an AC outlet.
2
, Note y After all connections are completed, you can arrange cables as needed.
y Cable ties are not provided.
> Caution
Only use the AC adapter supplied with this device. Do not use a power supply from another device or manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty.
2
20 Connecting
Wireless subwoofer and rear speaker (Sold
Separately) connection
Wireless subwoofer connection
LED indicator of wireless subwoofer
LED Color Status
Green
(Blink)
Green
Red
The connection is trying.
The connection is completed.
The wireless subwoofer is in standby mode or the connection is failed.
The power cord of wireless subwoofer is disconnected.
Off (No display)
Setting up the wireless subwoofer for the first time
1. Connect the power cord of the sound bar and the wireless subwoofer to the outlet.
2. Turn on the sound bar. The sound bar and the wireless subwoofer will be automatically connected.
Pairing is completed. The green LED on the rear of the wireless subwoofer turns on.
Manually pairing wireless subwoofer
When your connection is not completed, you can check red LED on the wireless subwoofer and the wireless subwoofer does not make sound. To solve the problem, follow the steps below.
1. Press on the rear of the wireless subwoofer.
Pairing
The green LED on the rear of the wireless subwoofer blinks quickly.
(If the green LED does not blink, press and hold the Pairing .)
2. Turn on the sound bar.
Pairing is completed. The green LED on the rear of the wireless subwoofer turns on.
, Note y It takes a few seconds (and may take longer) for the main unit and the subwoofer to communicate with each other and make sounds.
y The closer the main unit and the subwoofer, the better sound quality. It is recommended to install the main unit and the subwoofer as close as possible and avoid the cases below.
There is an obstacle between the main unit and the subwoofer.
There is a device using same frequency with this wireless connection such as a medical equipment, a microwave or a wireless LAN device.
Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
Connecting 21
Rear speakers connection (Sold
Separately)
Connecting the rear speakers
1. Connect the black stripe wire to the terminal marked - (minus) and the other end to the terminal marked + (plus).
2
!
1 m
2. Connect the wireless receiver and the rear speakers (left, right) with the speaker cables.
Color
Blue
Grey
Position
Rear left
Rear right
, Note
You need to purchase the wireless rear speakers kit (SPK8-S) to enjoy surround sound.
22 Connecting
> Caution y Use the speaker supplied with this unit only. Using any other speaker may cause malfunction.
y Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack bass.
Manually pairing wireless receiver
When your connection is not completed, you can see the red LED on the wireless receiver and rear speakers do not make sound. To solve the problem, follow the below steps.
1. Press on the rear of the wireless receiver.
2
LED indicator of wireless receiver
LED Color Status
Yellow - green
(Blink)
The connection is trying.
Yellow - green The connection is completed.
Red
Off
(No display)
The wireless receiver is in standby mode or the connection is failed.
The power cord of wireless receiver is disconnected.
Setting up the wireless receiver for the first time
1. Connect the power cord to the wireless receiver to the outlet.
2. Turn on the main unit: The sound bar and wireless receiver will be automatically connected.
Yellow - green LED on the wireless receiver turns on.
The yellow - green LED on the wireless receiver blinks quickly.
2. Turn on the main unit
Paring is completed. The yellow - green LED on the wireless receiver turns on.
Surround sound
You can enjoy magnificent surround sound for all the input sound source with rear speakers.
If you turn on the surround function, the whole speaker outputs sound.
When you turn off the surround function, the speakers output sound as an original input sound channel.
To turn on surround function, press and hold on the remote control for about 3 seconds and press it once again while “OFF - SURROUND” is scrolled.
To turn off surround function, press and hold on the remote control for about 3 seconds and press it once again while “ON - SURROUND” is scrolled.
Connecting 23
Surround function ON
Sound Effect
AI SOUND PRO
BASS BLAST or
BASS BLAST+
STANDARD
MOVIE
MUSIC
Input
2.0 Ch
5.1 Ch
7.1 Ch or more
2.0 Ch
5.1 Ch
7.1 Ch or more
2.0 Ch
5.1 Ch
7.1 Ch or more
2.0 Ch
5.1 Ch
7.1 Ch or more
2.0 Ch
5.1 Ch
7.1 Ch or more
No rear speakers
Output
Rear speakers connected
2
2
24 Connecting
Surround function OFF
Sound Effect
AI SOUND PRO
BASS BLAST or
BASS BLAST+
STANDARD
MOVIE
MUSIC
Input
2.0 Ch
5.1 Ch
7.1 Ch or more
2.0 Ch
5.1 Ch
7.1 Ch or more
2.0 Ch
5.1 Ch
7.1 Ch or more
2.0 Ch
5.1 Ch
7.1 Ch or more
2.0 Ch
5.1 Ch
7.1 Ch or more
No rear speakers
Output
Rear speakers connected
How to Affix the Ferrite Core
Ferrite core may not be provided depending on each nation’s regulations.
Affix the Ferrite Core for speaker cables
You must affix a ferrite core in order to reduce or eliminate electrical interference.
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the speaker cables around the ferrite core twice.
3. Close the ferrite core until it clicks.
Connecting 25
, Note y If there is a strong electromagnetic wave product nearby, interference may occur. Put the main unit and wireless receiver away from there. y The wireless receiver will automatically switch to standby mode in a few minutes after the sound bar is turned off.
When the wireless receiver is in standby mode, the LED will turn on in red.
y When you turn on the sound bar, the wireless receiver will turn on and the LED will change to yellow - green and then the rear speakers makes sound within a few seconds.
y It takes a few seconds (and may take longer) for the main unit and Wireless Receiver to communicate with each other.
y Use the rear speaker at least 30 cm away from either TV screen or PC monitor.
y When the wireless receiver is being connected or disconnected with the main unit, output sound is maybe interrupted.
y Set the distance between the sound bar and the wireless receiver as close as possible and keep them away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
2
!
1 m
2
26 Connecting
Connecting to your TV
Please connect with this unit and TV using the optical digital cable or HDMI cable considering the state of the TV.
Using an OPTICAL cable
1. Connect the OPTICAL IN jack on the back of the unit to OPTICAL OUT jack on the TV using an
OPTICAL cable.
Optical cable
2. Select the input source to OPT/HDMI ARC by pressing F repeatedly.
You can see “OPT” on the display window if connecting normally between this unit and your
TV.
, Note y Before connecting the optical cable, be sure to remove the protection plug cover if your cable has the cover.
y You can enjoy the TV audio through the speakers of this unit. In the case of some TV models, you must select the external speaker option from the TV menu. (For details, reference your TV user manual.) y If this unit is connected by OPTICAL and ARC at the same time, the ARC signal has a higher priority.
LG Sound Sync
You can control some functions of this unit by your TV’s remote control with LG Sound Sync. It is compatible with the LG TV that supports LG Sound
Sync. Make sure of the LG Sound Sync logo is on your
TV.
Controllable function by LG TV’s remote control:
Volume up/down, mute
, Note y You can also use the remote control of this unit while using LG Sound Sync. If you use TV’s remote control again, the unit synchronizes with the TV.
According to TV Specifications, the volume and mute of this unit synchronize with TV.
y When the connection fails, make sure of the condition of the TV and power.
y Make sure of the condition of this unit and the connection in the cases below when using
LG Sound Sync.
T he unit is turned off.
Changing to another function.
Disconnecting the optical cable.
y The amount of time to turn off this unit is different depending on your TV when you set
AUTO POWER function to ON.
LG Sound Sync with wired connection
1. Connect your LG TV to the unit by using an optical cable.
Optical cable
Connecting 27
Using an HDMI cable
If you connect this unit to a TV that supports HDMI
CEC and ARC (Audio Return Channel), you can enjoy the TV audio through the speakers of this unit without connecting the optical cable.
1. Connect the HDMI OUT (TV eARC/ARC) jack on the back of the unit to ARC jack on the TV using an HDMI cable.
2
HDMI cable
2. Set up the sound output of TV to listen to the sound through this unit:
(Refer to the TV’s instruction manual for the details of LG Sound Sync.)
3. Turn on the unit by pressing 1 .
4. Select the input source to OPT/HDMI ARC by pressing F repeatedly.
You can see “LGOPT” on the display window if connecting normally between this unit and your
TV.
2. Select the input source to OPT/HDMI ARC by pressing F repeatedly.
You can see “ARC” or “E-ARC” on the display window if connecting normally between this unit and your TV.
, Note y You can enjoy the TV audio through the speakers of this unit. In the case of some TV models, you must select the external speaker option from the TV menu. (For details, reference your TV user manual.) y Depending on your LG TV model, you may need to turn on the SIMPLINK function on your LG TV.
y When you return to ARC function from another function, you need to select the input source to OPT/HDMI ARC. Then this unit changes to ARC function automatically.
2
28 Connecting
ARC (Audio Return Channel) function
The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of the unit.
eARC (Enhanced Audio Return
Channel) function
eARC (Enhanced Audio Return Channel) features an advancement over the existing ARC (Audio Return
Channel) and supports the latest high-bitrate audio formats such as DTS-HD Master Audio™, DTS:X®,
Dolby® TrueHD, Dolby Atmos® and more.
You can use your multiple components just by simple connection.
Preparing to Use the eARC or ARC
Function
Your TV must support the HDMI-CEC and eARC or ARC function and the HDMI-CEC and eARC or
ARC must be set to On.
The setting method of HDMI-CEC, eARC or ARC may differ depending on the TV. For details about eARC or ARC function, refer to your TV manual.
You must use the certified HDMI cable. (page
You must connect the HDMI OUT on the unit with
HDMI IN of the TV that supports eARC or ARC function using an HDMI cable.
You can connect only one Sound bar to TV compatible with eARC or ARC.
What is SIMPLINK?
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control:
Power on/off, volume up/down, etc.
Refer to the TV owner’s manual for the details of
SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as shown above.
, Note y Depending on the state of the unit, some
SIMPLINK operation may differ from your purpose or not work.
y Depending on a TV or a player which is connected with this unit, SIMPLINK operation may differ from your purpose.
Connecting 29
Additional information for HDMI
y When you connect an HDMI or DVI compatible device make sure of the following:
- Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.
- The connected device’s video input is set correctly for this unit.
- The connected device is compatible with
720 x 576p (or 480p), 1280 x 720p,
1920 x 1080i, 1920 x 1080p, 4096 x 2160p or 3840 x 2160p video input.
y Not all HDCP-compatible HDMI or DVI devices will work with this player.
- The picture will not be displayed properly with non-HDCP device.
, Note y If a connected HDMI device does not accept the audio output of the player, the HDMI device’s audio sound may be distorted or may not output.
y Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again.
y When the HDMI connection with HDCP is not verified, TV screen is changed to black screen.
In this case, check the HDMI connection, or disconnect the HDMI cable.
y If there are noises or lines on the screen, please check the HDMI cable (length is generally limited to 4.5 m).
y You cannot change the video resolution in the
HDMI mode. Change the video resolution of the connected component.
y If the video output signal is abnormal when your personal computer is connected to HDMI
IN jack, change the resolution of your personal computer to 576p (or 480p), 720p, 1080i or
1080p.
HDMI cable Checklist
Some HDMI cables have poor signal transmission, which can cause problems with sound and video transmission.
Even after HDMI cable connections, if no sound, sound interrupted, noise occurring from the sound bar and/or no video, no smooth video on your TV, the
HDMI cable may be the problem.
Use the cable marked with the premium HDMI certification logo. We recommend using “High Speed
HDMI Cable with Ethernet” or later version.
STANDARD HDMI CABLE WITH ETHERNET
(X)
(X)
HIGH SPEED HDMI CABLE
(O)
HIGH SPEED HDMI CABLE WITH ETHERNET
(O)
Premium High Speed HDMI® Cable with Ethernet
(O)
ULTRA HIGH SPEED HDMI® CABLE
Connection through HDMI Cable*
Your television must support the newest HDMI features (HDMI CEC 1) / ARC (Audio Return Channel)) to fully enjoy the Live broadcasting channel with audio system through an HDMI cable. Unless your
TV supports these HDMI features, the audio system should be connected through an OPTICAL cable.
1) HDMI CEC (High-Definition Multimedia Interface
Consumer Electronics Control)
Consumer Electronics Control (CEC) is an HDMI feature designed to allow the user to command and control the CEC-enabled devices, that are connected through HDMI by using only one of their remote controls.
* Trade names for CEC are SimpLink (LG) , Anynet+
(Samsung), BRAVIA Sync (Sony), EasyLink (Philips), etc.
2
2
30 Connecting
Optional equipment connection
DOLBY ATMOS®
What is DOLBY ATMOS®?
Dolby Atmos gives you amazing experience you’ve never before by overhead sound, and all the richness, clarity, and power of Dolby sound.
DTS:X®
What is DTS:X®?
In the real world, sound is all around us, moving freely in any direction. DTS:X® is immersed in this natural, multi-dimensional sound experience as we go about our daily lives.
For using DOLBY ATMOS® and DTS:X®
y DOLBY ATMOS® is available only in HDMI and ARC mode.
To use DOLBY ATMOS® in ARC mode, your TV has to support DOLBY ATMOS®.
y DTS:X® is available only in HDMI mode y It is needed to set up an audio output on external devices (Blu-ray disc player, TV etc.) to “No encoding” such as “Bitstream”, “Auto” or “Bypass”.
If you can select audio output sampling rate, set it to 192 kHz.
y If your TV does not support DTS sound source, connect the playback (source) device to the HDMI
IN or OPTICAL IN jack on the soundbar to listen to
DTS audio.
1. Connect HDMI IN jack on the back of the unit to
HDMI OUT jack on the external device such as
Blu-ray disc player, DVD player, etc.
2. Connect HDMI OUT (TV eARC/ARC) jack on the back of the unit to HDMI IN (ARC) jack on the TV.
3. Select the input source to HDMI or OPT/HDMI
ARC by pressing F repeatedly.
If you select HDMI, you can hear the sound from the external device. Select it when playing the external device.
If you select OPT/HDMI ARC, you can hear the sound from your TV. Select it when watching the TV.
You can see “DOLBY ATMOS” or “DTS:X” on the display window if connecting normally between this sound bar and your TV and the contents is played.
, Note y DOLBY ATMOS®/DTS:X® supports 3.1.2 channel. (5.1.2 channel when it connected with Rear kit) y If the sound bar does not have sound or the video on TV is not smooth, the HDMI cable may be the problem. Refer to the HDMI cable
HDMI IN connection
You can enjoy the sound from the external device which is connected to HDMI IN jack on this unit.
Connecting 31
OPTICAL IN connection
Connect an optical output jack of external devices to the OPTICAL IN jack.
To the Blu-ray disc player,
DVD player, etc.
1. Connect HDMI IN jack on the back of the unit to
HDMI OUT jack on the audio device such as Bluray disc player, DVD player, etc.
2. Select the input source to HDMI by pressing F repeatedly.
To the optical output jack of external device
Optical cable
1. Connect the OPTICAL IN jack on the back of the unit to optical out jack of your external device.
2. Select the input source to OPT/HDMI ARC by pressing F repeatedly.
You can see “OPT” on the display window if connecting normally between this unit and your device.
, Note
Before connecting the optical cable, be sure to remove the protection plug cover if your cable has the cover.
> Caution
Make sure to properly align and connect the optical cable; improper alignment may cause damage to the jack.
2
Optical jack Optical cable Optical jack Optical cable
<O> <X>
32 Connecting
Optional equipment connection
You can enjoy both sound and picture from the external device you connect.
2
OR
1. Connect HDMI IN jack of your TV to HDMI OUT jack on the external device such as Blu-ray disc player, DVD player, etc.
2. Connect the OPTICAL IN jack on the back of the unit to OPTICAL OUT jack on the TV using an
OPTICAL cable.
Or connect the HDMI OUT (TV eARC/ARC) jack on the back of the unit to HDMI IN (ARC) jack on the TV using an HDMI cable.
3. Select the input source to OPT/HDMI ARC by pressing F repeatedly.
, Note
If the sound bar does not have sound or the video on TV is not smooth, the HDMI cable may be the problem. Refer to the HDMI cable
3 Operating
Works with the Google
Assistant
This unit works with the Google Assistant. You can control some functions of this unit: Play and stop music and volume control.
Requirements y Google Assistant built-in device (Sold Separately) y This unit must be connected to Internet.
y This unit must be registered in [Google Home] app.
Operating 33
3
3
34 Operating
“LG Wi-Fi Speaker”
The “LG Wi-Fi Speaker”app is provided by LG
Electronics. This app allows you to use various functions of this speaker through your smart device:
Requirements before using
You should connect to Wi-Fi by using “Google Home”
app prior using this app. (Page 18)
Enjoying music on your device and home network server
You can listen to the music on your smart device and home network server.
Using Chromecast built-in
You can enjoy music contents through this sound bar with Chromecast enabled apps.
Setting and controlling the sound bar
You can manage the sound bar settings and control the sound bar even without remote control.
Requirements
y A wireless router must be connected to the internet.
y A smart device such as a smartphone or tablet must be connected to the wireless router via Wi-
Fi connection.
, Note
For more informations of “LG Wi-Fi Speaker”, follow the instructions of the application.
Installing “LG Wi-Fi Speaker”
App
Through Apple “App Store” or “Google
Play Store”
1. Tap the Apple “App Store” icon or “Google Play
Store” icon.
2. Type in “LG Wi-Fi Speaker” in the search bar and tap “Search”.
3. Select “LG Wi-Fi Speaker” in the search result list to download.
, Note y “LG Wi-Fi Speaker” app will be available in version of the software as follow;
Android OS: Ver 5.0 (or later) iOS: Ver 10 (or later) y Depending on the device, “LG Wi-Fi Speaker” app may not work.
y You can find the available application of this unit by using “LG Audio” app.
Android OS: Ver 5.0 (or later)
Operating 35
Using a BLUETOOTH
Wireless Technology
About BLUETOOTH
Bluetooth is wireless communication technology for short range connection.
The sound may be interrupted when the connection interfered by the other electronic wave or you connect the Bluetooth in the other rooms.
Connecting individual devices under Bluetooth wireless technology does not incur any charges. A mobile phone with Bluetooth wireless technology can be operated via the Cascade if the connection was made via Bluetooth wireless technology.
y Available Devices: Smart phone, MP3, Notebook, etc.
y Version: 5.0
y Codec: SBC
BLUETOOTH profiles
In order to use Bluetooth wireless technology, devices must be able to interpret certain profiles. This speaker is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Listening to Music of a
BLUETOOTH Device
Before you start the pairing procedure, make sure that the Bluetooth feature on your smart device is turned on. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again.
1. Select the Bluetooth function by pressing F repeatedly.
“BT” and then “READY” appears in the display window.
2. Operate the Bluetooth device and perform the pairing operation. When searching for this speaker on your Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of
Bluetooth device.
If your unit is connected to Wi-Fi, you can see the name you set in the Google Home app. If the unit is not connected to Wi-Fi, “LG-SN8Y_XXXX” appears.
3. Select the speaker name of your unit.
, Note y Speaker name was setup in the Google
Home app. For example, if the speaker name is set to “Living Room” in the
Google Home app, you will see “Living
Room” on your Bluetooth device.
y XXXX means the last four digits of address. For example, if your unit has a
MAC address such as 20:C3:8F:C9:31:55, you will see “LG-SN8Y_3155” on your
Bluetooth device.
y You may check and edit the speaker name
on “Google Home” app (Page 37)
y Depending on the Bluetooth device type, some devices have a different pairing way.
For details about Bluetooth pairing, refer to your Bluetooth device manual.
3
3
36 Operating
4. When this unit is successfully connected with your Bluetooth device,
“PAIRED” [ your device’s name [ “BT” appears on the display window.
, Note y If it is unavailable to display device name on the unit, “-” will be displayed.
y To check the connected device’s name, press J on the remote control. The connected Bluetooth device’s name is displayed.
5. Listen to music.
To play music in your Bluetooth device, refer to your Bluetooth device’s user guide.
According to your Bluetooth device’s volume level, the volume level of Bluetooth will be adjusted.
, Note y When using Bluetooth technology, you have to make a connection between the unit and the Bluetooth device as close as possible and keep the distance.
However it may not work well in the case below:
There is an obstacle between the unit and the Bluetooth device.
There is a device using same frequency with Bluetooth technology such as a medical equipment, a microwave or a wireless LAN device.
y If last connected device is LG TV, this sound bar will connect to the TV automatically when you restart the sound bar.
y If the LG TV is turned off, this sound bar will enter “READY” ( Bluetooth ready) mode.
When the TV is turned back on, the Sound
Bar will not reconnect automatically. To connect the Sound Bar and the TV:
Turn the Sound Bar off and back on.
Then follow the TV’s on screen instructions.
y Available TV: LG TV models released after
2016 and some TVs may not work well.
, Note y This unit supports Bluetooth auto pairing.
However it does not operate in the case below:
When you restart this unit.
When you disconnect this unit by yourself.
When you disconnect this unit on the connected Bluetooth device.
y The sound may be interrupted when the connection is interfered with by the some other electronic wave.
y Pairing is limited to “One” Bluetooth device.
Multi-Pairing is not supported.
y Depending on the type of the device, you may not be able to use the Bluetooth function.
y You can enjoy using Bluetooth when using
Phone, MP3, Notebook, etc..
y The more distance between the unit and the
Bluetooth device, the lower the sound quality becomes.
y Bluetooth connection will be disconnected when the unit is turned off or the Bluetooth device gets to far from the unit.
y If the Bluetooth connection is disconnected, connect the Bluetooth device again.
y When a Bluetooth device is not connected,
“READY” appears on the display window.
y If you change to another function after connecting Bluetooth device, Bluetooth connection will be disconnected. When you return to Bluetooth function, Bluetooth connection will be connected automatically.
y When one Bluetooth device has connected to this unit, another device cannot find and connect to this unit. If you want to connect another device, disconnect the current device and try again.
Controls connected BLUETOOTH device
You can control the connected Bluetooth device from the unit; play, pause, skip, volume.
, Note y Only Android OS and iOS is available to use this function..
y This function may not be supported depending on the Bluetooth device or some of TV operated differently.
Edit speaker name
You can check and edit the speaker name on the
“Google Home” app.
Operating 37
3
3
38 Operating
Other operations
Using your TV remote control
You can control some functions of this unit by your
TV remote control even by other company’s product.
Controllable functions are volume up/down and mute.
Press and hold SOUND EFFECT on the remote control for about 3 seconds. “ON - TV REMOTE” appears and you can control this unit by your TV remote control.
To check the status of this function, press and hold
SOUND EFFECT on the remote control.
To turn off this function, press and hold SOUND
EFFECT on the remote control and press it once again while “ON - TV REMOTE” is scrolled.
, Note y Make sure that the sound output of your TV is set to [External speaker].
y This function does not operate on LG TV’s magic remote control.
y This function may not work well when some
TV control functions such as HDMI CEC,
SIMPLINK and LG Sound Sync set to ON.
y This function may not work well when the unit and the TV are connected with an HDMI cable.
y Some remote control may not be supported.
AUTO POWER On/Off
This sound bar automatically turns on and off by an input source: Optical
To turn on this function, press and hold J on the remote control for about 3 seconds and press it once again while “OFF - AUTO POWER” is scrolled.
To check the status of this function, press and hold
J on the remote control.
To turn off this function, press and hold J on the remote control for about 3 seconds and press it once again while “ON - AUTO POWER” is scrolled.
Turning on
When you turn on your TV or an external device connected to this unit, this unit recognizes the input signal and selects the suitable function. You can hear the sound from your device.
Turning off
When the TV is off, this sound bar switches to the
Networked standby mode.
, Note y After the unit is turned on by AUTO POWER function, it will be automatically turned off if there is no signal for a certain period of time from the TV connected by LG Sound Sync
(Optical).
y After the unit is turned on by AUTO POWER function, it will be automatically turned off if there is no signal for a certain period of time from the external device.
y If you turned off the unit directly, it cannot be turned on automatically by AUTO POWER function. However the unit can be turned on by AUTO POWER function when optical signal comes in after 5 seconds of no signal.
y Depending on the connected device, this function may not operate.
y When you turn on this unit for the first time, status of Auto Power function is turned on.
y You can set the AUTO POWER function only when this unit is turned on.
Auto function change
This sound bar recognizes input signals such as
Optical, HDMI ARC, Bluetooth , and “LG Wi-Fi
Speaker” app and then changes suitable function automatically.
When you turn on your TV or an external device
When you turn on your TV or an external device connected by the one among Optical, LG Sound Sync
(Optical), or HDMI ARC, this sound bar will change to a suitable function so you can listen to the sound through it.
When you try to connect a
BLUETOOTH device
When you try to connect your Bluetooth device to this unit, Bluetooth function is selected. Play your music on the Bluetooth device.
When you play music by “LG Wi-Fi
Speaker” app
When you play music by “LG Wi-Fi Speaker” app on your smart device, this sound bar changes the function to WI-FI and you can listen to the music through it.
, Note
This unit does not change the function to optical if SIMPLINK of the connected TV, Bluray disc player, set-top box or etc. device set to on or connected CEC supported device is turned on.
If you want to use the auto function change, turn off SIMPLINK function on your LG TV. It takes for about 30 seconds to turn off SIMPLINK.
Operating 39
How to disconnect the wireless network connection or the wireless device
Turn off the unit by pressing the power button for more than 3 seconds.
3
3
40 Operating
Standby mode
The speaker switches to the standby mode if there is no music playback or no button operation.
Standby mode
If you press and hold 1 for about 3 seconds, the speaker switches to the standby mode. Then “GOOD-
BYE” appears on the display window. And all wireless network ports are deactivated.
Networked standby mode
Option 1.
When music is not played and buttons are not pressed for 15 minutes, the speaker switches to the Networked standby mode. Then “GOOD-BYE” appears on the display window.
Option 2.
If you press 1 , the speaker switches to the
Networked standby mode. Then “GOOD-BYE” appears on the display window.
Reset the Speaker
If the speaker doesn’t respond, reset the speaker.
Press and hold the / on the unit until you hear the beep sound once. You can see “RESET” on the display window. Then all the stored wireless network information is deleted.
4 Troubleshooting
Troubleshooting 41
Troubleshooting
General
Symptoms
The unit does not work properly.
The power does not turn on.
Sound is not produced.
No woofer sound
The remote control does not work properly.
The AUTO POWER function does not work.
LG Sound Sync does not work.
Cause & Solution
y Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn them on again.
y Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
y Previous setting may not be saved when device power is shut off.
Is the power cord plugged into the outlet?
y Connect the power plug to the outlet.
Is the volume set to minimum?
y Adjust the volume.
y When you are using connection with a external device (set top box, Bluetooth device etc.), adjust volume level of the device.
Is the mute function activated?
y Press [ or adjust the volume level to cancel the mute function.
Is the function selected properly?
y Check the input source and select the correct input source.
Is the subwoofer plugged in?
y Plug the power cord of subwoofer into the wall outlet securely.
Is pairing between the unit and the subwoofer disconnected?
y
Connect the unit and the subwoofer. (Page 20)
Is the remote control too far from the unit?
y Operate the remote control within about 7 m.
Is there an obstacle in the path of the remote control and the unit?
y Remove the obstacle.
Are the batteries in the remote control exhausted?
y Replace the batteries with new one.
y Check connection of the external device such as TV, DVD/Blu-Ray player.
y Check the state of SIMPLINK on your LG TV and turn off SIMPLINK.
y Depending on the connected device, this function may not operate.
y Check whether your LG TV supports LG Sound Sync (Wired).
y Check connection of LG Sound Sync (Wired).
y Check sound setting of your TV and this unit.
4
4
42 Troubleshooting
Symptoms
When you feel the output sound of the unit is low.
Bluetooth pairing does not work well.
Cause & Solution
Check the details below and adjust the unit according to them.
y Switch the state of DRC function to [OFF] by using “LG Wi-Fi Speaker”.
y With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
y With the sound bar connected with Player, change the AUDIO DIGITAL OUT setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
[BITSTREAM].
y Change Audio DRC setting on connected device setup menu to [OFF] state.
y Make sure that Night Time mode is not On. Turn off Night Time mode.
y Be sure your Bluetooth device is on.
y Switch Bluetooth off and on again on your Bluetooth device, then try pairing again.
y Remove the obstacle in the path of the Bluetooth device and the unit.
y Depending on the type of the Bluetooth device or surrounding environment, your device may not be paired with the unit.
Troubleshooting 43
Network
Symptoms
Cannot connect the speaker to your home network.
Wi-Fi connection does not work well.
Cause & Solution
y The wireless communication may be interrupted from household devices that are using radio frequencies. Move the speaker away from them.
y Check your router. Try turning it off and back on.
y Check that the Wi-Fi feature is turned on in your smart device.
y Check that the speaker and your smart device are connected to same Wi-Fi.
If you restart the router?
y You need to turn the speaker’s power off and on again.
If you install new router.
y You need to perform a factory set and setup the network connection for speaker.
Application
Symptoms
The application doesn’t work properly.
Cause & Solution
Does an error occur when accessing the app?
y Make sure that your smart device is compatible with the app. y Make sure that the application is the latest version.
y Make sure that the connected unit turns on.
4
44 Troubleshooting
NOTES to use wireless
Symptoms
This device may have wireless interference.
Bluetooth device may malfunction or make noise in the following cases.
Cause & Solution
y Wireless may not operate normally in weak signal area.
y Please install the device close enough to wireless subwoofer.
y Do not install the device on metal furniture for optimum performance.
y When any part of your body contact the transceiver of the Bluetooth device or sound bar.
y When there is an obstacle or wall or the device is installed in a secluded spot.
y When there is a device (a wireless LAN, a medical equipment or a microwave) using same frequency, make the distance between the products as far away as possible each other. y When connecting the device to the Bluetooth device, make the distance between the products as close as possible each other.
y When the device gets too far from the Bluetooth device, the connection is disconnected and also malfunction may occur.
4
NOTES to release Demo mode
Symptoms
Can not change input source with F such as BT
( Bluetooth ), HDMI etc. and only [DEMO] indication is showing in the front display.
Remote Control does not work. (No response)
Cause & Solution
Unplug the power cord and plug it in again.
If that doesn’t work, after setting the volume to 2, press and hold F (About 5 seconds) on the main unit until the display indicates current selected function.
5 Appendix
Trademarks and licenses
All other trademarks are trademarks of their respective owners.
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Atmos, and the double-D symbol are Trademarks of dolby Laboratories.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol together, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the
United States and/or other countries. © DTS, Inc.
All Rights Reserved.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by LG
Electronics is under license.
Other trademarks and trade names are those of their respective owners.
The terms HDMI, HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
Appendix 45
5
5
46 Appendix
Specifications
General
Power consumption
AC adapter
Dimensions (W x H x D)
Operating temperature
Refer to the main label on the unit.
Networked standby: 5.0 W
(If all network ports are activated.)
Model: DA-50F25
Manufacturer : Asian Power Devices Inc.
Input: 100 - 240 V ~ 50 - 60 Hz
Output: 25 V 0 2 A
Approx. 1060.0 mm x 57.0 mm x 119.0 mm (with foot)
5 °C to 35 °C
Operating humidity
Available Digital Input Audio
Sampling Frequency
5 % to 90 %
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 192 kHz
Available Digital Input Audio format Dolby Atmos, Dolby Audio, DTS:X, DTS-HD, PCM
Input/Output
OPTICAL IN
HDMI IN
HDMI OUT
3 V (p-p), Optical jack x 1
19 Pin (Type A, HDMI™ connector) x 1
19 Pin (Type A, HDMI™ connector) x 1
1080p, 1080i, 720p, 576p, 480p
2160p@24/25/30 Hz 4:4:4
2160p@60/50 Hz 4:2:0
4K Sources dependent on HDCP 2.3 are supported at 4K resolutions.
Amplifier (RMS Output)
Total
Front
Center
Top
Subwoofer
440 W RMS
40 W RMS x 2 (4 Ω at 1 kHz, THD 10 %)
40 W RMS (4 Ω at 1 kHz, THD 10 %)
50 W RMS x 2 (4 Ω at 1 kHz, THD 10 %)
220 W RMS (3 Ω at 80 Hz, THD 10 %)
Wireless subwoofer
Power requirements
Power consumption
Type
Impedance
Rated Input Power
Max. Input Power
Dimensions (W x H x D)
Refer to the main label on the subwoofer.
Refer to the main label on the subwoofer.
1 Way 1 Speaker
3 Ω
220 W RMS
440 W RMS
Approx. 221.0 mm x 390.0 mm x 312.8 mm
System
Wireless LAN (Internal antenna) 802.11a/b/g/n Wi-Fi networks
SPK8-S (SPK8-S, S78S1-S), Sold Separately
Wireless receiver
Power requirements
Power consumption
Rear
Dimensions (W x H x D)
Refer to the main label on the wireless receiver.
Refer to the main label on the wireless receiver.
70 W RMS x 2 (3 Ω at 1 kHz, THD 10 %)
Approx. 60.0 mm x 220.0 mm x 175.0 mm
Rear speakers (Each)
Type
Impedance
Rated Input Power
Max. Input Power
Dimensions (W x H x D)
1 Way 1 Speaker
3 Ω
70 W RMS
140 W RMS
Approx. 100.0 mm x 140.0 mm x 100.0 mm y Designs and specifications are subject to change without prior notice.
Appendix 47
5
5
48 Appendix
Handling the Unit
When shipping the Unit
Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.
Keeping the exterior surfaces clean
y Do not use volatile liquids such as insecticide spray near the unit. y Wiping with strong pressure may damage the surface.
y Do not leave rubber or plastic products in contact with the unit for a long period of time.
Cleaning the unit
To clean the unit, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.
Important Information
Relating to Network
Services
All information, data, documents, communications, downloads, files, text, images, photographs, graphics, videos, webcasts, publications, tools, resources, software, code, programs, applets, widgets, applications, products and other content (“Content”) and all services and offerings (“Services”) provided or made available by or through any third party (each a “Service Provider”) is the sole responsibility of the
Service Provider from whom it originated.
The availability of and access to Content and
Services furnished by the Service Provider through the LGE Device are subject to change at any time, without prior notice, including, but not limited to the suspension, removal or cessation of all or any part of the Content or Services.
Should you have any inquiry or problem related to the Content or Services, you may refer to the
Service Provider’s website for the most up-to-date information. LGE is neither responsible nor liable for customer service related to the Content and Services.
Any question or request for service relating to the
Content or Services should be made directly to the respective Content and Service Providers.
Please note that LGE is not responsible for any
Content or Services provided by the Service Provider or any changes to, removal of, or cessation of such Content or Services and does not warrant or guaranty the availability of or access to such Content or Services.
Appendix 49
TERMS OF USE
These Terms of Use apply to those individuals and groups who use LG’s Wi-Fi speaker, any software(s) associated with LG Wi-Fi speaker, this application and any services associated this application (collectively
“LG Software”). They set out LGE’s responsibilities to you as well as identifying the “dos” and “don’ts” that you should be aware of when you use the
LG Software. LG Software is proprietary software owned by LG Electronics Inc., a corporation registered in Korea with its registered office at Yeouido-dong
20, Yeoungdeungpo-gu, Seoul, Korea. LGE, and its licensors (“LGE”, “us” or “we”).
By accessing or using LG Software, you confirm that you accept these Terms of Use and that you agree to comply with them. If you do not agree to these Terms of Use, you may not access or use the LG Software.
To the extent that any conflict arises between these
Terms of Use and any other document referred to in these Terms of Use, these Terms of Use will take precedence, unless clearly stated otherwise in the relevant document.
We grant you a non-exclusive license to use the preinstalled copy of LG Software solely to the extent necessary for you to use your LG Wi-Fi speaker personally and for no other purpose.
You acknowledge that all ownership rights in LG
Software anywhere in the world belong exclusively to us and that no ownership rights in LG Software are transferred to you. You are only entitled to the limited use of LG Software as is granted in these license terms.
You may not copy, modify, decompile or reverse engineer our software in any way unless you are allowed to do so by law. We reserve the right to suspend, withdraw or discontinue all or part of the
Services without notice if we consider that you are in breach of these Terms of Use.
You acknowledge that LG Software has not been developed to meet your individual requirements. We make no promises or guarantees that LG Software is free from bugs or errors or that it will always be available. We use commercially reasonable efforts to provide LG Software on a continuous, high quality basis but cannot guarantee that they will always be available, uninterrupted or error free. It is possible that we may have to interrupt or discontinue the LG
Software or suspend or restrict your use of all or any part of the Services where we consider it reasonably necessary for technical, operational, security, legal or regulatory reasons.
We do not accept any responsibility if for any reason the Services or any part of them are unavailable at any time or for any period.
Although you may use LG Software to download and access content or applications made available by third parties on your LG Software, we make no promises or guarantees that you will always be able to access such content or applications. So far as we are legally able to do so, we exclude any warranties, conditions or other terms which may be implied into these license terms by law.
So far as we are legally able to do so, we exclude any liability for any loss or damage incurred by you or any other person in connection with your use of LG
Software. We are only responsible for loss or damage suffered that is a foreseeable result of our breach of these license terms or our negligence up to the amount specified below, but we are not responsible for any loss or damage that is not foreseeable .
Loss or damage is foreseeable if it is an obvious consequence of our breach or if it was contemplated by you and us when you starting using LG Software.
For any loss or damage that is not excluded under these license terms, whether in contract, tort (including negligence) or otherwise, the total liability of us and our group of companies to you is limited to the amount that you paid for your LG
Software service. To the extent permissible under the applicable laws, some jurisdictions do not allow the limitation or exclusion of liability for incidental or consequential damages, or have legislation that restricts the limitation or exclusion of liability, so the above limitation may not apply to you.
Nothing is these license terms shall limit or exclude our liability for death or personal injury relating from our negligence, fraud or fraudulent misrepresentation or any other liability that cannot be excluded or limited by law.
LG Software provides access to “apps” and link to other services owned and operated by third parties, such as content providers. Any third party apps, services and content that you access via the Services are made available to you by these third party providers and are outside the scope of these Terms of
Use.
Your dealings with any third party providers are solely between you and the relevant provider and may be subject to the provider’s own terms and conditions and privacy policy. We encourage you to read these documents, although we are not responsible for their content. We do not accept any responsibility for apps, services or content provided by third party providers.
5
5
50 Appendix
We may impose limits on the use of or access to certain third party content, application or services, in any case without notice or liability. We expressly disclaims any responsibility or liability for any change, interruption, disabling, removal of or suspension of any content, application or service made available through this LG Software. We are neither responsible nor liable for customer service related to the content, application and services. Any question or request for service relating to third party’s content, application or services should be made directly to the respective content and service providers or application developers, as appropriate.
These terms do not affect your statutory rights as a consumer.
Suitability of the Services for children and parental control tools
Modify this accordingly to suit if appropriate: The
Services are not directed at children under the age of 13 and are not structured specifically to attract children under 13. Further, certain content that you may access through your use of the Services may contain material that you consider indecent, objectionable or which may not be suitable for children.
If you permit a child to use your LG Smart TV to access the Services, you are solely responsible for deciding whether or not the relevant Services are appropriate for access by that child.
[Your Smart TV offers a parental control tool (by way of a 4 digit PIN). If you have enabled the 4-digit
PIN, your LG Smart TV will not be able to display restricted content unless you type in the PIN. You are responsible for setting up and maintaining the parental control tool and any other controls that are available, and we will not be responsible for any harm, loss or damage you suffer or any other user of your
LG Smart TV suffers as a result of your failure to do so. Depending on the models of your LG Smart TV, these features may not be available.
Viruses and Security
Modify this accordingly to suit if appropriate: We use commercially reasonable efforts to ensure that the
Services are secure and virus free, but those efforts cannot and do not guarantee that the Services will be free from bugs, viruses, or other vulnerabilities.
Further, we do not accept responsibility for any loss or damage caused by a virus, distributed denialof-service attack, or other technologically harmful material that may infect your LG Smart TV, data or other material belonging to you, during your use of the Services.
Modify as you think appropriate: Complaints
If you have any queries, concerns or complaints about the Services, please contact [include reference to non-personal LG email address].
Modify as you think appropriate: Miscellaneous
Unless expressly stated otherwise, these Terms of
Use and the documents referred to in them contain the entire agreement between us and you relating to your use of the Services and supersede any previous agreements, arrangements, undertakings or proposals, written or oral, between us and you relating to your use of the Services.
We may assign, sub-contract or otherwise transfer any or all of our rights and obligations under these
Terms of Use to any company, firm or person. We can only do this if it does not materially affect your rights under these Terms of Use. You may not assign, sub-contract or otherwise transfer your rights or obligations under these Terms to anyone else (except where you dispose of your LG Smart TV to a third party) unless you first agree this with us in writing.
If we decide not to exercise or enforce any right that we have against you at a particular time, then this does not prevent us from later deciding to exercise or enforce that right.
If any part of these Terms of Use is found to be illegal, invalid or otherwise unenforceable by a court or regulator, then, where required, that part shall be deleted and the remaining parts of the Terms of Use will continue to be enforceable.
These Terms of Use do not create or infer any rights that are enforceable by any person who is not party to them.
These Terms of Use are governed by the laws of the country where your LG Smart TV is sold and both you and LGE agree to submit to the exclusive jurisdiction of the courts of the country where your LG Smart TV is sold in connection with the same
This Agreement shall be governed by the laws of the
Republic of Korea, excluding their conflicts of laws provisions.
If you have any questions or comments about these
Terms of Use please contact www.lg.com.
These Terms of Use may be updated by LGE from time to time. If we make a material change to our Terms of Use, we will update you via your LG
Software or other means.
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com
.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected]
.
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.
Appendix 51
5
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- 3.1.2 Channel & 440W
- Dolby Atmos® & DTS:X
- Google Assistant built-in
- Chromecast Built-In
- High Resolution Audio (24bit/96kHz)
- Wireless Rear Speaker-Ready