Midmark Asepsis 21® Systems, International (Whip) Delivery Specification

Midmark Asepsis 21® Systems, International (Whip) Delivery Specification
Go To Table Of Contents
Asepsis 21®
Delivery Systems
Service and
Parts Manual
Chair Mounted
Floor Mounted
Side / Rear
Cart
NOTE:
Sterling Grey painted parts
are no longer available.
Check manual and use
Pebble Grey painted parts
if available.
Serial Number Prefixes:
PJ, PK, PL, PM, UA,
UC, UK, UW & V
Delivery
System
AS
EP
SIS
21
111
FOR USE BY MIDMARK
TRAINED TECHNICIANS ONLY
SF-1605
Style B
Part No. 004-0251-00 Rev. AA7 (6/18/19)
Go To Table Of Contents
TABLE OF CONTENTS
TABLE OF CONTENTS
Section/Paragraph................................................Page
Section/Paragraph ............................................... Page
IMPORTANT INSTRUCTIONS
General Safety Instructions ..........................................iv
Safety Alert Symbols ....................................................iv
Warranty Instructions ...................................................iv
Cart & Side/Rear Delivery
Systems
Asepsis 21 Duo/Assistant’s Housing
Cover Removal ....................................... 4-12
Cart Assembly Caster
Removal/Installation................................ 4-12
Delivery Arms
Flex Arm Cover Removal ........................... 4-12
Junction Box
Junction Box Cover Removal ..................... 4-13
Typical Valve Block Removal...................... 4-13
Alternate Handpiece Insallation
Lares® Handpiece Tubing Installation ....... 4-14
4.16
4.17
SECTION I GENERAL INFORMATION
1.1 Scope Of Manual.......................................... 1-1
1.2 How To Use Manual ..................................... 1-1
1.3 Description Of Delivery System.................... 1-1
1.4 Standard Torque Specs................................ 1-4
1.5 Specifications ............................................... 1-4
1.6 Parts Replacement Ordering........................ 1-6
1.7 Special Tools ................................................ 1-7
SECTION II TESTING AND TROUBLESHOOTING
2.1 Troubleshooting Procedures......................... 2-1
Delivery Head............................................... 2-1
Flex Arm ....................................................... 2-5
Cuspidor ....................................................... 2-6
Console ........................................................ 2-7
SECTION III SCHEDULED MAINTENANCE
3.1 Scheduled Maintenance............................... 3-1
SECTION IV MAINTENANCE / SERVICE
INSTRUCTIONS
General Safety Procedures
4.1 Disabling Unit For Repair ............................. 4-1
Tubing & Connectors
4.2 Typical Tubing Disconnection/Connection .... 4-1
Delivery Head
4.3 Asepsis 21 Delivery Head Cover Removal... 4-2
4.4 Int’l Delivery Head Cover Removal............... 4-3
4.5 Typical Kink Valve Assy
Removal/Installation .................................. 4-3
4.6 Delivery System Purge/Test Procedure........ 4-4
Cuspidor (Earlier Units)
4.7 Cuspidor Bowl Removal ............................... 4-6
4.8 Cuspidor Water Valve Removal/Installation.. 4-6
4.9 Cuspidor Bowl Flush Valve Adjustment........ 4-7
Cuspidor (Present Units)
4.10 Cuspidor Bowl .............................................. 4-8
4.11 Typical Push Button Valve ............................ 4-8
4.12 Cup Fill Water Valve ..................................... 4-9
4.13 Bowl Flush Water Valve................................ 4-9
4.14 Cup Fill / Bowl Flush Timing Valve ............. 4-10
Console
4.15 Console Cover Removal............................. 4-11
4.18
4.19
4.20
4.21
SECTION V SCHEMATICS AND DIAGRAMS
5.22 Flow Schematics / Wiring / Tubing
Diagrams ................................................ 5-1
Flow Schematics
(Units built from 1996 thru present)
Asepsis Chair Mounted Delivery Unit
(w/Self Contained Water System)............. 5-2
(w/City Water System) .............................. 5-3
Int’l Chair Mounted Delivery Unit
(w/Self Contained Water System)............. 5-4
(w/City Water System) .............................. 5-5
Flow Schematics
(Units built prior to 1996)
Int’l Chair Mounted Delivery Unit
(w/Self Contained Water System)............. 5-6
(w/City Water System) .............................. 5-7
Duo Cart /Wall Mounted Delivery Unit
(w/Self Contained Water System)............. 5-8
(w/City Water System) .............................. 5-9
Tubing Diagrams
Typical Asepsis 21 Delivery Head ............ 5-10*
Typical Int’l Delivery Head ........................ 5-11*
Typical Cuspidor......................................... 5-12
Typical Console
(w/Self Contained Water System)........... 5-13
(w/City Water System) ............................ 5-14
Typical Junction Box
(w/Self Contained Water System)........... 5-15
(w/City Water System) ............................ 5-16
Large Junction Box / Foot Control.............. 5-17
Small Junction Box (with Regulators) ........ 5-18
Small Junction Box (without Regulators..... 5-19
(*) Indicates that there has been a serial number break for the illustration
and that there are additional point page(s) following the original page.
© Midmark Corporation 2000 SF-1605 Rev. 9/10
Page 3
Printed in U.S.A.
TABLE OF CONTENTS
Typical Concept LR Unit ............................ 5-20
Wiring Diagrams
Typical Delivery Head................................. 5-21
Typical Console ......................................... 5-22
APC Power Supply .................................... 5-23
Typical Concept LR Unit ............................. 5-24
Accessories
Typical Handpiece Illumination Setup......... 5-25
Typical Scaler System Setup...................... 5-26
SECTION VI PARTS LIST
6.1 Introduction ................................................. 6-1
6.2 Description Of Columns ............................... 6-1
6.3 Torque Specifications And Important
Assembly Notes ........................................ 6-1
Pictorial Index
Asepsis 21 Console Unit .............................. 6-2
Whip-style Console Unit ............................... 6-3
Asepsis 21 Concept LR Unit ........................ 6-4
Whip-style Concept LR Unit ......................... 6-5
Asepsis 21 SLC Unit ................................... 6-6
Whip-style SLC Unit .................................... 6-7
Cart Assemblies ........................................... 6-8
Asepsis 21 Duo & Assistant’s Wall/Cabinet
Mounted Systems ..................................... 6-9
Long/Short Arm Side Delivery Systems ..... 6-10
Rear Delivery Systems............................... 6-11
Tubing & Connectors
Asepsis 21 Handpiece Tubing .................... 6-12
Whip Unit Handpiece Tubing .....................6-13*
Asepsis 21 Syringe Tubing ......................... 6-14
Whip Unit Syringe Tubing ..........................6-15*
Internal Tubing............................................ 6-16
Connectors & Fittings ................................. 6-17
Delivery Head
Asepsis 21 Delivery Unit Overview ............ 6-18
Whip-style Delivery Unit Overview ............. 6-19
Asepsis 21 Delivery Unit
Cover Components ................................6-20*
Whip Unit Cover Components ...................6-21*
Asepsis 21 Delivery Unit
Pneumatic / Hydraulic Components.......6-22*
Whip Unit Pneumatic/Hydraulic
Components............................................ 6-23
Kink Valve................................................... 6-24
Whip Assembly..........................................6-25*
Whip Unit Instrument Tray Assembly.......... 6-26
Cuspidor
Cuspidor Assembly Overview..................... 6-27
Cuspidor Assy Enclosure Components.....6-28*
© Midmark Corporation 2000 SF-1605 Rev. 3/06
Page 4
Cuspidor Assy with Components ............... 6-29
. Console
Chair Mounted Console Assy Overview .... 6-30
Floor Mounted Console Assy Overview ..... 6-31
Chair Mounted Console Assembly
Enclosure Components .......................... 6-32
Chair Mounted Console Assy.
Internal Components ............................. 6-33*
Floor Mounted Console Assy
Housing Components ............................. 6-34
Floor Mounted Console Assy
Base Components .................................. 6-35
FM Console Power Cord/
Receptacle Assembly ............................. 6-36
Cart & Side/Rear Delivery Systems
Instrument Tray Arm Assembly .................. 6-37
Tub Support Arm Assembly ....................... 6-38
Asepsis 21 Duo / Assistant’s
Top Components.................................... 6-39*
Asepsis 21 Duo / Assistant’s
Housing Components ............................. 6-40*
Mobile Work Surface Top Components..... 6-41*
Cart Assembly Base Components ............. 6-42
Duo Arm Assembly (Adjustable) ............... 6-43*
Duo Arm Pivot Joint Assembly................... 6-44
Duo Unit Wall Mount Components............. 6-45
Duo Unit Cabinet Mount Components ....... 6-46
Side Delivery Unit Wall Mount
Components ........................................... 6-47
Side Delivery Unit Cabinet Mount
Components ........................................... 6-48
Rear Delivery Unit Cabinet Mount
Components ........................................... 6-49
Delivery Arms
Air Lock Flex Arm Assembly ..................... 6-50*
Manual Lock Flex Arm Assembly ............... 6-51
Delivery Unit Arm Assembly ..................... 6-52*
SLC Unit Mounting Components ............... 6-53
Fixed Arm Assembly .................................. 6-54
LR Units
LR Unit Arm Assembly.............................. 6-55*
LR Console Components........................... 6-56
LR Vac Pak Upper Components ............... 6-57*
LR Vac Pak Lower Components ............... 6-58*
LR Cuspidor Assembly............................... 6-59
LR Assistant’s Instrument Holder.............. 6-60*
LR Unit Instrument Tray Assembly............. 6-61
Printed in U.S.A.
TABLE OF CONTENTS
Light Transformer Assembly, 120 V ...........6-65*
Valve Block Assembly ................................ 6-66
Air Control Assembly .................................6-67*
Water Valve Assembly...............................6-68*
Junction Box Hardware Kit ......................... 6-69
Console Mounting Brackets
Biltmore / Biltmore Classic ......................... 6-92
Legacy / Legacy II...................................... 6-93
Royal Mount ............................................... 6-94
Belmont 7 thru 37....................................... 6-95
Dental-EZ PL200 / J13 Simplicity .............. 6-96
Dental-EZ Advantage / JV / E2000 ............ 6-97
Adec Decade / 2000 .................................. 6-98
Ritter X - 100.............................................. 6-99
Adapters................................................... 6-100
Work Surface (18"x13")............................ 6-101
Post Mount, Cuspidor (153050-00) .......... 6-102
Syringes (Standard & Heated)
Quick Clean Standard Syringe &
Quick Clean Continental Syringe ............ 6-70
AutoClavable Standard Syringe &
AutoClavable Continental Syringe........... 6-71
Heated Syringe Pwr Supply- Ext. Mt. ......... 6-72
Heated Syringe Pwr Supply- Int. Mt. .......... 6-73
Miscellaneous
Foot Control Assembly ..............................6-74*
Vacuum Instruments Mtg Components ...... 6-75
Unit Mounted Chair Control Knight Chairs only ................................... 6-76
Whip Unit Mounted Chair Control Midmark Chairs only ............................... 6-77
Curing Light Assembly ..............................6-78*
Cabinet Mtd Assistant’s Instr. /
Cabinet Mtd HVE & Saliva Ejector ........... 6-79
LR Mounted Telescopic Arm ...................... 6-80
Console Mounted Telescopic Arm.............. 6-81
Handpiece Illumination System
Externally Mounted ................................. 6-82
Handpiece Illumination SystemInternally Mounted .................................6-83*
Water Driven Aspirator Assy .....................6-84*
Distilled Water System Kit Universal Mount ...................................... 6-85
Handpiece Scaler System .......................... 6-86
Saliva Ejector/HVE Valve Components ...... 6-87
Unit Mtd. X-Ray Viewer .............................6-88*
Post Mounted X-Ray Viewer....................... 6-89
Accessory Shelf 151818-xx........................ 6-90
Accessory Shelf 152526-xx........................ 6-91
© Midmark Corporation 2000 SF-1605Rev. 9/10
Labels & Decals
Asepsis 21 Delivery Head........................ 6-103
International Delivery Head...................... 6-104
Umbilical Assemblies
Asepsis 21 Delivery Head on
Knight Chairs ........................................... 6-105
Asepsis 21 Delivery Head on
Midmark UltraComfort & UltraTrim Chairs 6-106
COMMENTS ............................................................. 7-1
FAX ORDER FORM.................................................. 7-2
Page 5
Printed in U.S.A.
Return To Table Of Contents
TABLE OF CONTENTS
General Safety Instructions
Safety First: The primary concern of Midmark Corporation is that this delivery system is maintained with
the safety of the patient and staff in mind. To assure
that services and repairs are completed safely and correctly, proceed as follows:
(1) Read this entire manual before performing any
services or repairs on this delivery system.
(2) Be sure you understand the instructions contained in this manual before attempting to service or repair this delivery system.
Safety Alert Symbols
Throughout this manual are safety alert symbols that
call attention to particular procedures. These items are
used as follows:
NOTE
A NOTE is used to amplify an operating procedure,
practice or condition.
Warranty Instructions
Refer to the Midmark “Limited Warranty” printed in the
Installation and Operation Manual for warranty information. Failure to follow the guidelines listed below will
void the warranty and/or render the delivery system
unsafe for operation.
•
•
•
DANGER
In the event of a malfunction, do not attempt to
operate the delivery system until necessary repairs
have been made.
Do not attempt to disassemble delivery system,
replace malfunctioning or damaged components,
or perform adjustments unless you are one of Midmark’s authorized service technicians.
Do not substitute parts of another manufacturer
when replacing inoperative or damaged components. Use only Midmark replacement parts.
A DANGER is used for an imminentlyhazardous operating procedure, practice, or condition which, if not correctly followed,
will result in loss of life or serious personal
injury.
WARNING
A WARNING is used for a potentially
hazardous operating procedure, practice, or condition which, if not correctly followed,
could result in loss of life or serious personal
injury.
CAUTION
A CAUTION is used for a potentially hazardous operating procedure, practice, or
condition which, if not correctly followed, could result
in minor or moderate injury. It may also be used to
alert against unsafe practices.
EQUIPMENT ALERT
An EQUIPMENT ALERT is used for an
imminently or potentially hazardous operating procedure, practice, or condition which, if not
correctly followed, will or could result in serious, moderate, or minor damage to unit.
© Midmark Corporation 2000 SF-1605
Page v
Printed in U.S.A.
Return To Table Of Contents
SECTION I
GENERAL INFORMATION
SECTION I
GENERAL INFORMATION
1.1
Scope of Manual
1.3
This manual contains detailed troubleshooting, scheduled maintenance, and service instructions for all Knight
by Midmark Delivery Systems. This manual is intended
to be used by authorized service technicians only.
1.2
How to Use Manual
A. Manual Use When Performing Scheduled
Maintenance
Description of Delivery System
A. General Description
Knight by Midmark delivery systems are available in a
variety of configurations (console mounted systems,
floor mounted systems, LR systems, side/rear delivery
systems, cart assemblies, etc.). The delivery system
components may be purchased separately or as complete chair/delivery packages.
Two models of delivery units are available: the
Asepsis 21 Delivery Unit, and the International Delivery
Unit (see Figure 1-1).
(1) Perform inspections and services listed in
Scheduled Maintenance Chart.
(Refer to para 3.1).
(2) If a component is discovered to be faulty or out
of adjustment, replace or adjust component as
necessary. Refer to para 4.1 for basic cover
removal and common service procedures.
B. Basic Theory of Operation
(Asepsis 21 Delivery Unit)
Master ON/OFF Switch
When the Master ON/OFF switch is turned ON, air
passes through the ON/OFF switch valve to the pilot
valve block.
B. Manual Use When Delivery System Is
Malfunctioning And Cause Is Unknown
(1) Perform troubleshooting procedures listed in
Troubleshooting Guide. (Refer to para 2.1).
(2) If a component is discovered to be faulty or out
of adjustment, replace or adjust component as
necessary. Refer to para 4.1 for basic cover
removal and common service procedures.
• If ON/OFF switch malfunctions, check
purple line from pilot valve block. If air is
detected, replace ON/OFF switch. If air is not
detected, check pilot valve block.
INTERNATIONAL
DELIVERY UNIT
C. Manual Use When Damaged Component Is Known
(1) Replace or adjust damaged component(s).
Refer to para 4.1 for basic cover removal and
common service procedures.
ASEPSIS 21
DELIVERY UNIT
AS
EP
SIS
21
111
KA931600
Figure 1-1. Delivery Units
© Midmark Corporation 1998 SF-1594
Page 1-1
Printed in U.S.A.
Return To Table Of Contents
SECTION I
GENERAL INFORMATION
Pilot Valve Block
Handpiece Holder Assembly
The pilot valve block directs the flow of air, city water,
and self contained water throughout the system.
When a handpiece is lifted out of the holder assembly,
lever action opens the handpiece holder valve allowing
air to flow to the kink valve assembly.
• If air/water leaking from small holes in back
of valve block, replace o-rings.
• If decreased air/water pressure from valve
block is detected, check/clean valve block filters
and screens.
Kink Valve Assembly
When the handpiece holder valve opens, air flows to
the kink valve causing it to open. This allows coolant
air, drive air, and coolant water to flow thru the kink
valve to the handpiece.
The air and water regulators (mounted to side of valve
block) adjust the air and water pressure from the block.
Recommended settings: Air- 80 PSI, Water- 30 PSI
The optional Self Contained Water System has an air
regulator (mounted separately) to adjust the air pressure to the water bottle.
Recommended setting: 30 PSI
• If inadequate pressure, clean and adjust
regulator. Replace regulator if necessary.
Foot Control Assembly
Standard Foot Control (no water ON/OFF switch)
This style foot control supplies drive air only to handpieces.
• If kink valve does not open when handpiece
is removed from holder assembly, disconnect
air line coming from handpiece holder valve.
If air is not detected, replace handpiece holder
valve. If air is detected, replace kink valve.
C. Basic Theory of Operation
(International Delivery Unit)
Master ON/OFF Switch
When the Master ON/OFF switch is turned ON, air
passes through the ON/OFF switch valve to the pilot
valve block.
• If ON/OFF switch malfunctions, check
purple line from pilot valve block. If air is
detected, replace ON/OFF switch. If air is not
detected, check pilot valve block.
• If handpieces have water but no air, clean foot
control. Replace foot control if necessary.
• If handpiece(s) run momentarily w/o activating
foot control, disconnect drive air line and check
for air pressure. If air pressure is detected,
replace foot control.
Pilot Valve Block
The pilot valve block directs the flow of air, city water,
and self contained water throughout the system.
• If air/water leaking from small holes in back
of valve block, replace o-rings.
Wet/Dry Foot Control (w/water ON/OFF switch)
This style foot control supplies drive air and coolant
water to handpieces. When the water ON/OFF switch
is turned ON, the coolant water valve opens allowing
coolant water to flow to handpieces.
• If no coolant water at handpiece(s), disconnect
orange line from coolant water valve and activate
foot control. If no air is detected, replace foot
control.
• If decreased air/water pressure from valve
block is detected, check/clean valve block filters
and screens.
The air and water regulators (mounted to side of valve
block) adjust the air and water pressure from the block.
Recommended settings: Air- 80 PSI, Water- 30 PSI
• If handpiece(s) run momentarily w/o activating
foot control, disconnect drive air line and check
for air pressure. If air pressure is detected,
replace foot control.
© Midmark Corporation 1998 SF-1594 Rev. (1/07)
Page 1-2
Printed in U.S.A.
Return To Table Of Contents
The optional Self Contained Water System has an air
regulator (mounted separately) to adjust the air pressure to the water bottle.
Recommended setting: 30 PSI
SECTION I
GENERAL INFORMATION
• If kink valve does not open when handpiece is
lifted, check location of the whip assembly’s wire
actuator. If wire actuator is below spring hub pin,
adjust screw and nut to contact stop pin at correct
time.
• If inadequate pressure, clean and adjust
regulator. Replace regulator if necessary.
• If kink valve does not open when handpiece is
lifted (and wire actuator is in correct position),
disconnect air line coming from pilot valve. If no
air is detected, replace pilot valve. If air is
detected replace kink valve.
Foot Control Assembly
Standard Foot Control (no water ON/OFF switch)
This style foot control supplies drive air only to handpieces.
D. Basic Theory of Operation
(Air Lock Flex Arm)
• If handpieces have water but no air, clean foot
control. Replace foot control if necessary.
Locking Mechanism
When the air lock switch (located on the right side of
the delivery head) is turned ON (lock position), locking
pawls (located under flex arm cover) prevent downward
movement of the flex arm. The flex arm will move
upward freely.
• If handpiece(s) run momentarily w/o activating
foot control, disconnect drive air line and check
for air pressure. If air pressure is detected,
replace foot control.
Wet/Dry Foot Control (w/water ON/OFF switch)
This style foot control supplies drive air and coolant
water to handpieces. When the water ON/OFF switch is
turned ON, the coolant water valve opens allowing
coolant water to flow to handpieces.
• If no coolant water at handpiece(s), disconnect
orange line from coolant water valve and activate
foot control. If no air is detected, replace foot
control.
• If handpiece(s) run momentarily w/o activating
foot control, disconnect drive air line and check
for air pressure. If air pressure is detected,
replace foot control.
• If the locking mechanism will not activate, remove
flex arm cover; then perform the following steps:
1. Check that wire tie (used for shipping) around
locking pawls has been removed.
2. Disconnect air line from flex arm cylinder. If air
pressure is detected, replace arm lock switch
valve (toggle switch on delivery head). If no air
pressure is detected, replace air lock cylinder
switch valve (piston style valve in flex arm).
• If the locking mechanism will not release, remove
the flex arm cover; then perform the following
steps:
1. Tighten any loose mounting hardware on
locking pawls.
2. Check that brown tubing is not kinked or
pinched.
Handpiece Operation
When a handpiece is lifted, the whip assembly pivots
causing a pilot valve to open. The open pilot valve
allows air to flow to the kink valve assembly.
• If flex arm drifts up or down, adjust nut tension
on spring.
Kink Valve Assembly
When the pilot valve opens, air flows to the kink valve
causing it to open. This allows coolant air, drive air, and
coolant water to flow through the kink valve to the handpiece.
© Midmark Corporation 1998 SF-1594 Rev. (1/07)
Page 1-3
Printed in U.S.A.
Return To Table Of Contents
SECTION I
GENERAL INFORMATION
1.4
Standard Torque Specifications
1.5
The following standard torque specifications in
Table 1-1 apply to the hardware used on the unit unless
otherwise noted in the service procedures or parts illustrations:
Specifications
Dimensional data for the Knight Delivery System is provided in Figures 1-2 thru 1-5.
Table 1-1. Torque Specifications
18.12"
Hardware Size
Torque Values
#6 ..............................11 to 21 inch-lbs. (1.2 to 2.3 N•M)
#8 ..............................20 to 30 inch-lbs. (2.2 to 3.3 N•M)
#10 ............................32 to 42 inch-lbs. (3.6 to 4.8 N•M)
1/4 inch......................75 to 85 inch-lbs. (8.5 to 9.6 N•M)
5/16 inch................... 18 to 22 ft.-lbs. (24.4 to 29.8 N•M)
3/8 inch..................... 31 to 35 ft.-lbs. (42.0 to 47.5 N•M)
1/2 inch..................... 50 to 60 ft.-lbs. (67.8 to 81.4 N•M)
16.5"
14.3"
Asepsis 21
Delivery Head
International
Delivery Head
KA940100
Figure 1-2. Delivery Head Dimensions
WALL
31" MIN
CLEARANCE
REQ'D TO
PLACE ARM
PERPENDICULAR
TO CHAIR
12"
WALL
60
16" MIN to 21"MIN
CENTER OF CHAIR
TO CENTER OF ARM HUB
50" MIN
CLEARANCE
REQ'D TO
PLACE ARM
PERPENDICULAR
TO CHAIR
o
29"
CENTERLINE
OF CHAIR
245
o
CENTERLINE
22"
OF CHAIR
24"
24"
300
o
300
o
13.3"
13.3"
50.5" MIN
64" MAX
13.5"
13.5"
42" MIN
55.5" MAX
45" MIN
58" MAX
28" +- 1"
25" +- 1"
14" APPROX.
TO THE FLOOR
8" APPROX.
BASE LIFT TRAVEL:
+ 0.5"
17" (43.2 cm)
DEPENDING ON LIMIT
SWITCH SETTING
BASE PLATE DIMENSIONS:
24" (61 cm) WIDE X 34"
(86.3 cm) LONG
BASE LIFT TRAVEL:
+ 0.5"
17" (43.2 cm)
DEPENDING ON LIMIT
SWITCH SETTING
CONCEPT LR UNIT
BASE PLATE DIMENSIONS:
24" (61 cm) WIDE X 34"
(86.3 cm) LONG
CHAIR MOUNTED CONSOLE UNIT
KA940200
Figure 1-3. Chair Mounted Unit Dimensions
© Midmark Corporation 1998 SF-1594
Page 1-4
Printed in U.S.A.
Return To Table Of Contents
SECTION I
GENERAL INFORMATION
Mounting Holes -16" on center
18.5"
Wall
55" TO 61"
27"
1.0"
4"
Center Line
of Rotation
24"
18.12"
1" From Bottom
of Counter Top
or Cabinet Drawer
14.2"
3.75"
13.28"
27"
13.72"
17.50"
approx.
29.0"
Center Line of
Headrest With
Chair in Supine
Position
Wall
12"
TO
24"
Floor
LONG ARM SIDE DELIVERY UNIT
36" To 42"
16"
18.12"
28"
Minimum
Cabinet
Opening
19"
24" To 30"
28"
Opening
Required
12"
Center Line
of Rotation
14.32"
19" Cabinet Width
8.03"
38.4"
3.94"
3.25"
9.57"
12" to 24"
9.67"
1" From Bottom
of Counter Top
or Cabinet Drawer
Center Line of
Headrest With
Chair in Supine
Position
SHORT ARM SIDE DELIVERY UNIT
3/4" THK SIDING
MOUNTING BOARD
(PART OF CABINET)
WHEN ATTACHED TO 12:00
DELIVERY CASEWORK & FULLY EXTENED
1-3/4" CLEARANCE
FOR COVER REMOVAL
9.00 "
45 o
4-1/2"
4-1/2"
PIVOT POINT
14.00"
1-13/16"
4 feet
45 o
16.00 "
FOUR 1/4"
MOUTING
HOLES
1" UMBILICAL
APPROX.
18"
REAR DELIVERY UNIT
KA940300
Figure 1-4. Side / Rear Delivery Unit Dimensions
© Midmark Corporation 1998 SF-1594
Page 1-5
Printed in U.S.A.
Return To Table Of Contents
SECTION I
GENERAL INFORMATION
1.6
Parts Replacement Ordering
(3) Determine the installation date of the delivery
system. Record this data.
If a replacement part is required, order the part directly
from the factory as follows:
(4) Call Midmark with the recorded information and
ask for the Technical Service Department. See
back cover of this manual for the phone number
or use the Fax Order Form (See page 7-2 for
Fax Order Form).
(1) Refer to Figure 1-2 to determine the location of
the model number and serial number of the
delivery system component. Record this data.
(2) Refer to the Parts List (para 6-1) to determine
the item numbers of the parts, part numbers of
the parts, descriptions of the parts, and quantities of parts needed. Record this data.
ASSISTANTS
CART
INTERNATIONAL
DELIVERY UNIT
ASEPSIS 21
DELIVERY UNIT
AS
EP
SIS
MODEL/SERIAL
NUMBER
21
111
MODEL/SERIAL
NUMBER
TYPICAL CONSOLE
(ASSISTANT'S SHOWN)
MODEL/SERIAL
NUMBER
TYPICAL FLEX ARM
(AIR LOCK SHOWN)
MODEL/SERIAL
NUMBER
MODEL/SERIAL
NUMBER
KA933900
Figure 1-2. Delivery System Components Model/Serial
© Midmark Corporation 1998 SF-1594
Page 1-6
Printed in U.S.A.
Return To Table Of Contents
SECTION I
GENERAL INFORMATION
1.7
Special Tools
Table 1-2 lists all of the special tools needed to repair
the delivery system, how to obtain the special tools, and
the purpose of each special tool.
Table 1-1. Special Tool List
Description of Special Tool
Manufacturer’s
Name / Address / Phone
Manufacturer’s
Part Number
Purpose of Special Tool
Multimeter
Commercially Available
Any Type
Used to perform continuity and voltage checks.
Torque Wrench
Commercially Available
Any Type
Used to tighten nuts or screws to specified values.
© Midmark Corporation 1998 SF-1594
Page 1-7
Printed in U.S.A.
Return To Table Of Contents
SECTION I
GENERAL INFORMATION
© Midmark Corporation 1998 SF-1594
Page 1-8
Printed in U.S.A.
SECTION II
TESTING AND TROUBLESHOOTING
Return To Table Of Contents
SECTION II
TESTING AND TROUBLESHOOTING
2.1
Troubleshooting Procedures
Table 2-1 is a Troubleshooting Guide to determine the
cause of delivery system malfunction.
Table 2-1. Troubleshooting Guide: Delivery Head
Problem
None of of the handpieces
or syringe(s) will function.
Symptom
Probable Cause
There is no water or air
Air on/off valve is turned off
present at any of the hand- or malfunctioning.
pieces or syringe(s).
Master on/off switch valve is
turned off or malfunctioning.
None of the handpieces
will run.
None of the handpieces
will run, but coolant water
and syringe water work
properly.
Syringe air and water work
properly, but handpieces
do not run or have water.
One handpiece does not
run or have water; all other
handpieces work properly.
Check that air on/off
valve is turned on.
Contact licensed plumber to
replace air on/off valve.
Check that master on/off Replace master on/off switch
switch valve is turned on. valve if necessary.
Adjust air regulator output
pressure until it is 80 PSI.
If necessary, clean or replace
air regulator.
Drive air foot pedal valve in
foot control is malfunctioning - stuck closed.
Check for proper air flow
out of foot control when
foot control pedal is
depressed.
Repair damaged foot control.
If necessary, replace foot control.
Pilot operated valve block is
malfunctioning or has dirt in
it.
Clean valve block or
replace suspect pilot
operated valve block with
known working valve
block.
Clean pilot operated valve
block; replace if necessary.
Air tubing from pilot operated Check air tubes for damvalve block to foot control to age, looseness, or disdelivery head is damaged,
connection.
loose, or disconnected.
Replace damaged tubing.
Reconnect any loose or disconnected tubing.
Air tubing from air regulator
to foot control damaged,
loose, or disconnected.
Check air tube for damage, looseness, or disconnection.
Replace damaged tubing.
Reconnect any loose or disconnected tubing.
Replace suspect foot
control with known working foot control.
Clean out drive air foot pedal
valve. If necessary, replace
entire foot control (foot control
switch valves are not available).
Tubing for drive air from foot
pedal valve to delivery head
is damaged, loose, or disconnected.
Check for air leaking from Replace damaged tubing.
tubing and check air tub- Reconnect any loose or dising for damage, looseconnected tubing.
ness, or disconnection
Handpiece on/off valve is
malfunctioning - stuck open
keeping kink valve “kinked”.
Replace suspect handpiece on/off valve with
known working on/off
valve.
Replace handpiece on/off
valve.
Air actuator for handpiece is
malfunctioning.
Check to see if kink valve
“unkinks” when handpiece is removed from
handpiece holder.
Replace air actuator.
Tubing to handpiece on/off
Check air tubes for damvalve and then to air actuator age, looseness, or disis damaged, loose, or disconnection.
connected.
© Midmark Corporation 2000 SF-1605
Correction
Main air regulator turned
Check that air regulator
down too low or malfunction- output pressure is 80
ing.
PSI.
Handpieces have water but Drive air foot pedal valve is
do not run.
stuck closed.
One handpiece does not
run; all other handpieces
work properly.
Check
Page 2-1
Replace damaged tubing.
Reconnect any loose or disconnected tubing.
Printed in U.S.A.
SECTION II
TESTING AND TROUBLESHOOTING
Return To Table Of Contents
Table 2-1. Troubleshooting Guide: Delivery Head
Problem
Symptom
Probable Cause
One handpiece does not
run; all other handpieces
work properly. - Continued
One handpiece does not
run, but has water and
coolant air; all other handpieces work properly.
Drive air flow adjustment
valve has been adjusted too
tightly, closing off air flow to
handpiece.
No water to syringes or
handpieces.
No water to handpiece(s),
but syringe(s) work properly.
No water to handpieces or
syringe, but handpieces
run.
All handpieces run and
syringe(s) work properly,
but there is no water to any
of the handpieces.
© Midmark Corporation 2000 SF-1605
Check
Check to see if airflow
has been cut off.
Correction
Loosen adjustment knob of
drive air flow adjustment valve.
Drive air tubing to handpiece Check air tubes for damposition is damaged, loose, age, looseness, or disor disconnected.
connection.
Replace damaged tubing.
Reconnect any loose or disconnected tubing.
Water on/off valve is turned
off or malfunctioning.
Check that water on/off
valve is turned on.
Contact licensed plumber to
replace on/off valve.
Master on/off switch valve is
turned off or malfunctioning.
Check to ensure master
on/off switch valve is
turned on.
Replace master on/off switch
valve if necessary.
City water systems only.
Pilot operated valve block
malfunctioning or blocked
(water side only).
Check that output pressure is approximately 40
- 50 PSI.
Clean or flush out pilot operated valve block. If necessary,
disassemble and clean pilot
operated valve block.
Check that water regulaCity water systems only.
Water regulator setting is too tor output pressure is 40
low or malfunctioning.
PSI.
Adjust water regulator output
pressure until it is 40 PSI.
If necessary, clean or replace
water regulator.
Self contained water systems only. Air regulator (to
water bottle) setting is too
low or malfunctioning.
Check that air regulator
output pressure is 40
PSI.
Adjust air regulator output
pressure until it is 40 PSI.
If necessary, clean or replace
air regulator.
Self contained water systems only. Air tubing to
water bottle switch valve or
water bottle is damaged,
loose, or disconnected.
Check air tubes for damage, looseness, or disconnection.
Replace damaged tubing.
Reconnect any loose or disconnected tubing.
Self contained water systems only. Water bottle
switch valve turned off or
malfunctioning.
Check that water bottle
switch valve (on side of
console) is turned on.
Replace water bottle switchvalve if necessary.
Self contained water systems only. Bad water bottle
gasket.
Check for air leaking from Replace water bottle gasket.
top of water bottle.
Coolant water control valve
(anti-retraction valve) is
stuck closed.
Replace suspect coolant
water control valve with
known working valve.
Replace coolant water control
valve.
Coolant water toggle valve
on foot control is turned off.
Check that coolant water
toggle is turned on.
Turn coolant water toggle on.
Coolant water toggle valve
on foot control is malfunctioning.
Check for water pressure at output of coolant
water toggle valve.
Replace entire foot control
(foot control switch valves are
not available).
Orange tubing (signal line
from foot control to coolant
water control valve) is
twisted, pinching off airflow.
Check if stop pin in arm
Untwist tubing and replace
is damaged or missing.
stop pin in arm.
Check if tubing is excessively twisted or pinched.
Page 2-2
Printed in U.S.A.
SECTION II
TESTING AND TROUBLESHOOTING
Return To Table Of Contents
Table 2-1. Troubleshooting Guide: Delivery Head
Problem
Symptom
Probable Cause
Check
No water to handpiece(s),
but syringe(s) work properly. -Continued
All handpieces run and
syringe(s) work properly,
but there is no water to any
of the handpieces.
-Continued
Water tubing from coolant
water control valve to kink
valves is damaged, loose, or
disconnected.
Check water tube for
damage, looseness, or
disconnection. Check for
any water leakage from
tube.
Handpiece runs, but there
is no water to handpiece.
Other handpieces work
correctly.
Coolant water flow adjustment valve has been
adjusted too tightly, closing
off water flow to handpiece.
Check to see if water flow Loosen adjustment knob of
has been cut off.
coolant water flow adjustment
valve.
Water leaking from handpieces.
All handpieces run, but are
not working properly.
© Midmark Corporation 2000 SF-1605
When removed from handpiece holder, water comes
out of any handpiece without foot control pedal being
depressed.
Correction
Replace damaged tubing.
Reconnect any loose or disconnected tubing.
Drive air tubing to handpiece Check air tubes for damposition is damaged, loose, age, looseness, or disor disconnected.
connection.
Replace damaged tubing.
Reconnect any loose or disconnected tubing.
Coolant water toggle valve is
malfunctioning -bleed port is
clogged allowing pressure to
remain in air line.
Pull off orange signal line
and check for residual air
pressure (residual air
pressure indicates bleed
port is not working).
Replace entire foot control
(foot control toggle valve is
not available).
Coolant water control valve
(anti-retraction valve) stuck
open.
Replace with known
working coolant water
control valve.
Replace coolant water control
valve.
Coolant water flush valve is
malfunctioning - stuck open.
Replace suspect coolant
water flush valve with
known working flush
valve.
Replace coolant water flush
valve.
One of the coolant water
flush check valves is malfunctioning - stuck open.
Check each coolant
Flush out coolant water flush
water flush check valve to check valve. Replace coolant
see if it is stuck open.
water flush check valve if necessary.
Water sputters when hand- Air in lines.
piece is used.
Check for air in coolant
water lines.
Depress coolant water flush
valve button and hold for
approximately 45 seconds.
Water is leaking into oil jar. Handpiece is not sealing at
Check for damaged or
hose connection point, caus- missing gasket in handing water to leak into
piece.
exhaust hole.
Replace damaged or missing
gaskets.
Water pressure at handpieces and syringes is too
low.
Adjust water regulator output
pressure until it is 40 PSI.
If necessary, clean or replace
water regulator.
Check that water regulaCity water systems only.
Water regulator setting is too tor output pressure is 40
low and needs adjusted.
PSI.
Self contained water systems only. Air regulator (to
water bottle) setting is too
low and needs adjusted.
Check that air regulator
output pressure is 40
PSI.
Adjust air regulator output
pressure until it is 40 PSI.
If necessary, clean or replace
air regulator.
Self contained water systems only. Air tubing to
water bottle switch valve or
water bottle is damaged or
leaking.
Check air tubes for damage or looseness.
Replace damaged tubing.
Reconnect any loose tubing.
Self contained water systems only. Water tubing
from water bottle to delivery
head or syringe(s) is damaged or leaking.
Check water tubes for
damage or looseness.
Replace damaged tubing.
Reconnect any loose tubing.
Page 2-3
Printed in U.S.A.
SECTION II
TESTING AND TROUBLESHOOTING
Return To Table Of Contents
Table 2-1. Troubleshooting Guide: Delivery Head
Problem
Symptom
All handpieces run, but are
not working properly.
-Continued
Water pressure at handpieces and syringes is too
low. -Continued
Check
Correction
Self contained water systems only. Water bottle
switch valve is partially
obstructed.
Check that water flow at
output of water bottle
switch is sufficient.
Self contained water systems only. Bad water bottle
gasket.
Check for air leaking from Replace water bottle gasket.
top of water bottle.
Handpiece of suspect handpiece position is not stored
properly in its handpiece
holder - so button of handpiece on/off valve is not
being depressed fully.
Check to see if a kink
valve assembly of an
unused handpiece is
“unkinked”, even though
handpiece is in handpiece holder.
Make sure operators know to
properly return handpieces to
fully stowed position in handpiece holders.
Handpiece on/off valve is out
of adjustment and is not
being activated properly
when handpiece is returned
to stored position in handpiece holder.
Check to see if handpiece on/off valve is activated when handpiece is
inserted in handpiece
holder.
Adjust handpiece on/off valve
button so it properly activates
when handpiece is inserted in
handpiece holder.
Handpiece on/off valve on
suspect handpiece position
is malfunctioning - stuck
closed.
Check to see if a kink
valve assembly of an
unused handpiece is
“unkinked”, even though
handpiece is in handpiece holder. Check
handpiece on/off valve
for proper operation.
Replace handpiece on/off
valve.
Air gage check valve of
handpiece being used is
malfunctioning - stuck open,
allowing drive air to run other
handpiece positions.
Inspect air gage check
valve, of handpiece position causing the problem, to see if it is stuck
open or replace suspect
air gage check valve with
known working check
valve.
Replace air gage check valve.
Leaking tube connector.
Check for leaks at connection point between
handpiece and tube connector.
Replace tube connector.
Kink valve of suspect position is not kinking properly.
Check to see if kink valve
is leaking.
Adjust kink valve. Replace
kink valve if necessary.
Handpiece runs momentarily after it is removed
from the handpiece holder
even though foot control
pedal is not depressed.
Drive air foot pedal valve is
malfunctioning - bleed port is
clogged allowing pressure to
remain in drive air line.
Pull off drive air line and
check for residual air
pressure (residual air
pressure indicates bleed
port is not working).
Replace entire foot control
(drive air foot pedal valve is
not available).
Main air switch is turned
off, but kink valves don’t
unkink.
Drive air foot pedal valve is
malfunctioning - bleed port is
clogged allowing pressure to
remain in drive air line.
Pull off drive air line and
check for residual air
pressure (residual air
pressure indicates bleed
port is not working).
Replace entire foot control
(drive air foot pedal valve is
not available).
While one handpiece is in
use, one or more additional
handpiece(s) run even
though they are in handpiece holders.
© Midmark Corporation 2000 SF-1605
Probable Cause
Page 2-4
Replace water bottle switchvalve if necessary.
Printed in U.S.A.
SECTION II
TESTING AND TROUBLESHOOTING
Return To Table Of Contents
Table 2-1. Troubleshooting Guide: Delivery Head
Problem
Symptom
All handpieces run, but are
not working properly.
-Continued
Coolant air only is not
working.
Handpieces work properly; Syringe has no air.
Syringe has no air.
Air/water flow adjustment
valve screws will not
tighten.
Adjustment screws will not
tighten.
Probable Cause
Check
Master on/off switch valve
malfunctioning - stuck open.
Replace suspect master
on/off switch valve with
known working switch
valve.
Replace master on/off valve.
Coolant air flow adjustment
valve has been adjusted to
tightly, closing off air flow to
handpieces.
Check to see if airflow
has been cut off.
Loosen adjustment knob of
coolant air flow adjustment
valve.
Coolant air tubing to handpiece positions is damaged,
loose, or disconnected.
Check air tubes for damage, looseness, or disconnection.
Replace damaged tubing.
Reconnect any loose or disconnected tubing.
Syringe air flow adjustment
valve is closed too tightly.
Check syringe air flow
adjustment valve for
proper adjustment.
Replace syringe air flow
adjustment valve if necessary.
Syringe air tubing to syringe
is damaged, loose, or disconnected.
Check air tubes for damage, looseness, or disconnection.
Replace damaged tubing.
Reconnect any loose or disconnected tubing.
Too much plating.
_
Correction
Retap adjustment screws and
screw holes.
Table 2-2. Troubleshooting Guide: Flex Arm
Problem
Symptom
Air lock flex arm will not
lock.
Air lock flex arm will not
lock.
Probable Cause
Check
Correction
Bread tie used for shipping
not removed.
Check to see if bread tie
is still in place.
Remove bread tie.
Arm lock cylinder switch
valve is malfunctioning bleed port is clogged allowing pressure to remain in flex
arm cylinder air line.
Pull off flex arm cylinder Replace arm lock cylinder
air line and check for
switch valve.
residual air pressure
(residual air pressure
indicates bleed port is not
working).
Arm lock cylinder switch
valve is malfunctioning stuck open.
Replace suspect arm
lock cylinder switch valve
with a known working
switch valve.
Replace arm lock cylinder
switch valve.
Check to see if pawls are
installed on arm lock cylinder pin.
Re-install locking pawls back
on arm lock cylinder pin and
tighten mounting hardware.
Air lock flex arm will not
unlock.
Even though arm lock cylinder is energized, flex arm
will not unlock.
Locking pawls in flex arm
have become loose and
have slipped off of arm lock
cylinder pin.
Air lock flex arm drifts.
Air lock flex arm drifts
down.
Spring tension jam nut
needs adjusted.
_
Tighten jam nut in arm.
Air lock flex arm drifts up.
Spring tension jam nut
needs adjusted.
_
Loosen jam nut in arm.
Arm lock cylinder switch
Air lock flex arm locks but
valve makes hissing noise. air constantly leaking.
Bad bleed off valve on arm
lock cylinder switch valve.
Replace suspect arm
lock cylinder switch valve
with known working
switch valve.
Manual flex arms only.
Adjustment knob on manual lock flex arm cannot be
adjusted.
Too much plating, causes
adjustment knob to be too
difficult to turn.
Check for excessive plat- Retap hole to clean out excess
ing in adjustment knob
plating.
hole.
© Midmark Corporation 2000 SF-1605
_
Page 2-5
Replace arm lock cylinder
switch valve.
Printed in U.S.A.
SECTION II
TESTING AND TROUBLESHOOTING
Return To Table Of Contents
Table 2-3. Troubleshooting Guide: Cuspidor
Problem
No water at cup filler and
bowl rinse.
No water at cup filler.
No water at bowl rinse.
Symptom
Neither cup filler or bowl
rinse have water.
When either cup filler button is pressed, no water
comes out; bowl rinse
works correctly.
Probable Cause
Check
Correction
Pilot operated valve block
malfunctioning.
Replace suspect pilot
Replace pilot operated valve
operated valve block with block.
known working valve
block.
Main water tubing from pilot
operated valve block to cuspidor is damaged, loose, or
disconnected.
Check water tubes for
damage, looseness, or
disconnection.
Replace damaged tubing.
Reconnect any loose or disconnected tubing.
Water on/off valve is turned
off or malfunctioning.
Check that water on/off
valve is turned on.
Replace water on/off valve if
necessary.
Cup filler flow adjustment
valve has been adjusted too
tightly, closing off water to
cup filler.
Check to see if water flow Loosen adjustment knob of
to cup filler has been cut cup filler flow adjustment
off.
valve.
Tubing between cup filler
push button valves and cup
filler is damaged, loose, or
disconnected.
Check water tubes for
damage, looseness, or
disconnection.
Replace damaged tubing.
Reconnect any loose or disconnected tubing.
Replace suspect bowl
rinse push button valve
with known working push
button valve.
Replace bowl rinse push button valve.
Water saver control valve is
stuck closed.
Replace suspect water
saver control valve with
known working water
saver control valve.
Try to flush any debris out of
valve. Replace water saver
control valve if necessary.
Air pressure from main air
regulator is too low - needs
adjusted.
Check to see if air pressure from main air regulator is 80 PSI.
Adjust main air regulator output pressure until it is 80 PSI
If necessary, clean or replace
air regulator.
When bowl rinse push but- Bowl rinse push button valve
ton is pressed, no water
is malfunctioning - stuck
comes out; cup filler works closed.
correctly.
Tubing between water saver Check air tubing for dam- Replace damaged tubing.
control valve and main air
age, looseness, or disReconnect any loose or disregulator is damaged, loose, connection.
connected tubing.
or disconnected.
Water to bowl rinse runs
continuously.
Adjustable time delay bleed
off valve is malfunctioning not delaying bleed.
Check to see if air pressure remains in tubing or
bleeds off immediately.
Replace adjustable time delay
bleed off valve.
Bowl rinse flow adjustment
has been adjusted too
tightly, closing off water to
bowl rinse.
Check to see if water flow Loosen adjustment knob of
to bowl rinse has been
bowl rinse flow adjustment
cut off.
valve.
When bowl rinse push button is pressed, no water
comes out; cup filler works
correctly. -Continued
Tubing between water saver Check water tubes for
control valve and bowl rinse damage, looseness, or
tube damaged, loose, or dis- disconnection.
connected.
Water to bowl rinse runs
continuously; cup filler
works correctly.
Water saver control valve
stuck open.
Replace with known
Replace water saver control
working water saver con- valve.
trol valve. Malfunctioning
or dirty.
Adjustable time delay bleed
off valve is malfunctioning bleed port is clogged allowing air pressure to remain in
water control saver line (after
the time delay setting has
passed)
Pull off adjustable time
delay bleed off valve line
and check for residual air
pressure (residual air
pressure indicates bleed
port is not working).
© Midmark Corporation 2000 SF-1605
Page 2-6
Replace damaged tubing.
Reconnect any loose or disconnected tubing.
Replace adjustable time delay
bleed off valve.
Printed in U.S.A.
SECTION II
TESTING AND TROUBLESHOOTING
Return To Table Of Contents
Table 2-3. Troubleshooting Guide: Cuspidor
Problem
Symptom
Probable Cause
Check
Water to bowl rinse runs
continuously. -Continued
Water to bowl rinse runs
continuously; cup filler
works correctly.-Continued
Bowl rinse push button valve Replace suspect bowl
is malfunctioning - stuck
rinse push button valve
open.
with known working
valve.
Water to cup filler runs
continuously.
Water to cup filler runs
continuously; bowl rinse
works correctly.
One of the cup filler push
button valves stuck open.
Bowl rinse works when
button is pressed, but does
not run for desired length
of time.
Bowl rinse stops immediAdjustable time delay bleed
ately after button is
off valve needs adjusted.
released or does not run
long enough (up to 45 seconds)
Adjustable time delay bleed
off valve is malfunctioning bleed port is open allowing
pressure to escape from
water control saver line too
quickly.
Correction
Replace bowl rinse push button valve.
Check cup filler push but- Replace cup filler push button
ton valves or replace sus- valve.
pect cup filler push
button valve with known
working valve.
Adjust time delay bleed
off valve.
Adjust set screw of time delay
bleed off valve under cuspidor.
Replace suspect adjust- Replace adjustable time delay
able time delay bleed off bleed off valve.
valve with known working
bleed off valve.
Table 2-4. Troubleshooting Guide: Assistant’s Console
Problem
No water to syringe and
water quick connect.
Symptom
No water is present at
syringe and water quick
connect.
Probable Cause
Check
Air or water on/off valves are Check that air or water
turned off or are malfunction- on/off valves are turned
ing.
on.
Replace air or water on/off
valves if necessary.
Master on/off switch valve is
turned off or malfunctioning.
Check to ensure master
on/off switch valve is
turned on.
Replace master on/off switch
valve if necessary.
City water systems only.
Pilot operated valve block
malfunctioning or blocked
(water side only).
Check that output pressure is approximately 40
- 50 PSI.
Clean or flush out pilot operated valve block. If necessary,
disassemble and clean pilot
operated valve block.
Check that water regulaCity water systems only.
Water regulator setting is too tor output pressure is 40
low or malfunctioning.
PSI.
Adjust water regulator output
pressure until it is 40 PSI.
If necessary, clean or replace
water regulator.
Distilled water systems
only. Water bottle is empty.
Check that there is water
in water bottle.
Fill water bottle with distilled
water.
Distilled water systems
only. Air regulator (to water
bottle) setting is too low or
malfunctioning.
Check that air regulator
output pressure is 40
PSI.
Adjust air regulator output
pressure until it is 40 PSI. If
necessary, clean or replace air
regulator.
Check air tubes for damDistilled water systems
only. Air tubing to water bot- age, looseness, or distle switch valve or water bot- connection.
tle is damaged, loose, or
disconnected.
© Midmark Corporation 2000 SF-1605
Correction
Page 2-7
Replace damaged tubing.
Reconnect any loose or disconnected tubing.
Printed in U.S.A.
SECTION II
TESTING AND TROUBLESHOOTING
Return To Table Of Contents
Table 2-4. Troubleshooting Guide: Assistant’s Console
Problem
No water to syringe and
water quick connect.
-Continued
Symptom
No water is present at
syringe and water quick
connect. -Continued
© Midmark Corporation 2000 SF-1605
Probable Cause
Check
Correction
Tubing between manifold or
distilled water bottle and
syringe is damaged, loose,
or disconnected.
Check water tubes for
damage, looseness, or
disconnection.
Replace damaged tubing.
Reconnect any loose or disconnected tubing.
Distilled water systems
only. Water bottle switch
valve turned off or malfunctioning.
Check that water bottle
switch valve (on side of
console) is turned on.
Replace water bottle switchvalve if necessary.
Distilled water systems
only. Bad water bottle gasket.
Check for air leaking from Replace water bottle gasket.
top of water bottle.
Syringe water flow adjustment valve has been
adjusted too tightly, closing
off water to syringe.
Check to see if water flow Loosen adjustment knob of
to syringe has been cut
syringe water flow adjustment
off.
valve.
Distilled water systems
only. Water bottle switch
valve turned off or malfunctioning.
Check that water bottle
switch valve (on side of
console) is turned on.
Distilled water systems
only. Bad water bottle gasket.
Check for air leaking from Replace water bottle gasket.
top of water bottle.
Page 2-8
Replace water bottle switchvalve if necessary.
Printed in U.S.A.
Return To Table Of Contents
SECTION III
SCHEDULED MAINTENANCE
SECTION III
SCHEDULED MAINTENANCE
3.1
Scheduled Maintenance
Table 3-1 is a Scheduled Maintenance Chart which lists
the inspections and services that should be performed
periodically on the delivery system. These inspections
and services should be performed as often as indicated
in the chart.
Table 3-1. Scheduled Maintenance
Interval
Semi-annually
Inspection or Service
What to Do
Obvious damage
Visually check condition of delivery system for obvious damage such as: cracks in components,
missing components, dents in components, or any other visible damage which would cause the
delivery system to be unsafe to operate or would compromise its performance. Repair delivery
system as necessary.
Fasteners / hardware
Check delivery system for missing or loose fasteners / hardware. Replace any missing hardware
and tighten any loose fasteners as necessary.
Warning and instructional Check for missing or illegible decals. Replace decals as necessary.
decals
Tubing Connections
Remove covers and check for loose tubing connections. Reconnect tubing as necessary.
Damaged Tubing
Check handpiece and syringe tubing for air/water leaks or other visible damage. Remove covers
and check internal tubing for air/water leaks or other visible damage. Replace damaged tubing as
necessary.
Kink Valves
Remove delivery head cover and check kink valves for proper operation. No air/water leaks should
be apparent. Replace kink valve(s) as necessary. Refer to para 4.5.
Regulator Valves
Check that water regulator valve(s) are set at 40 PSI and air regulator valve is set at 80 PSI.
Adjust regulator valves as necessary.
Air Lock Flex Arm
Check that air lock flex arm will not move downward when air lock switch is ON. Replace or adjust
any malfunctioning components.
Manual Flex Arm
Check that manual lock flex arm will not move up or down when friction knob is tightened. Replace
or adjust any malfunctioning components
Cuspidor Bowl
Flush Valve
Check that cuspidor bowl rinse faucet runs for the desired length of time when cuspidor flush button
is pressed. Adjust flush time if necessary. Refer to para 4.9.
Illuminated Handpieces
(optional)
Check that bulbs are working. Check voltage at power pack (3.2 V should be present). Replace any
malfunctioning components as necessary.
Heated Syringe
(optional)
Check that heated syringe is working properly. Syringe should heat up in approx. 30 seconds.
Check resistance across molex connector. Resistance must be 10+1 ohms @ 77° F (25°C).
Replace any malfunctioning components as necessary.
© Midmark Corporation 1998 SF-1594
Page 3-1
Printed in U.S.A.
SECTION III
SCHEDULED MAINTENANCE
Return To Table Of Contents
© Midmark Corporation 1998 SF-1594
Page 3-2
Printed in U.S.A.
Return To Table Of Contents
SECTION IV
MAINTENANCE / SERVICE
SECTION IV
MAINTENANCE / SERVICE INSTRUCTIONS
The following paragraphs contain basic removal, installation, repair, and adjustment procedures for the delivery system.
1
General Safety Procedures
4.1
Disabling Unit For Repair
A. Electrical Power Disconnection
2
WARNING
kg/cm
1
2
3
4
5
6
7
psi
To prevent the possibility of electric
shock, always disconnect power cord
from electrical outlet before removing covers/
shrouds or making any repairs. Failure to comply
with these instructions could result in severe personal injury or death.
KA932900
Figure 4-2. Disabling Unit For Repair
(International Delivery Unit)
B. Air/Water Pressure Deactivation
NOTE
NOTE
Figure 4-1 shows the Asepsis 21 Delivery Unit.
Figure 4-2 shows the International Delivery unit.
If the Master ON/OFF switch (2) is left in the ON position, air and water pressure will be present in tubing.
(1) Disconnect delivery unit power cord (1,
Figure 4-1 or 4-2) from wall outlet.
(1) Turn Master ON/OFF switch (2) to the OFF
position.
Tubing & Connectors
4.2
1
AS
EP
SIS
Typical Tubing Disconnection/
Connection
21
A. Disconnection
(1) Slide collar of uni-clamp (1, Figure 4-3) away
from fitting (2) as shown.
2
(2) Disconnect tubing (3) by gently pulling away
from fitting (2).
KA932000
(3) Remove uni-clamp (1) from tubing (3) and set
aside for later use.
Figure 4-1. Disabling Unit For Repair
(Asepsis 21 Delivery Unit)
© Midmark Corporation 1998 SF-1605
Page 4-1
Printed in U.S.A.
Return To Table Of Contents
SECTION IV
MAINTENANCE / SERVICE
Delivery Head
DISCONNECTION
4.3
A. Removal
2
1
COLLAR
Asepsis 21 Delivery Head Cover
(1) Disable unit for repair. (Refer to para 4.1).
(2) Remove outer cover (1, Figure 4-4). [This cover
is held on w/magnets; no tools are required].
3
EQUIPMENT ALERT
OPEN
POSITION
When performing the following step, do not
attempt to completely remove the inner
cover. The adjustment valves on the inner cover are
attached to the tubing. Failure to comply could result
in accidental disconnection or damage to tubing.
CLOSED
POSITION
CONNECTION
1
(3) Remove thumbscrew (2) and thumbscrew (3)
from delivery head assembly; then partially
separate inner cover (4) to access internal components.
2
3
AS
EP
SIS
HA930900
21
1
Figure 4-3. Typical Tubing
2
B. Connection
(1) Slide collar of uni-clamp (1) so that it is in the
“open” position as shown.
(2) Slide uni-clamp (1) (collar end first) onto
tubing (3).
4
(3) Push tubing (3) onto fittting (2); then slide uniclamp (1) forward over the fitting.
(4) Slide collar of uni-clamp (1) toward fitting (2)
until it is in the “closed” position.
3
KA932100
Figure 4-4. Asepsis 21 Delivery Head Cover
© Midmark Corporation 1998 SF-1605
Page 4-2
Printed in U.S.A.
Return To Table Of Contents
4.4
International Delivery Head Cover
4.5
A. Removal
SECTION IV
MAINTENANCE / SERVICE
Typical Kink Valve Assembly
A. Removal
(1) Disable unit for repair. (Refer to para 4.1).
(1) Remove delivery head cover. (Refer to para 4.3
or 4.4).
(2) Remove instrument pad (1, Figure 4-5). [The
instrument pad is pressure fit onto two studs;
no tools are required].
NOTE
The Asepsis 21 Delivery Unit is shown in Figure 4-6.
The kink valve removal/installation procedure for the
International Delivery Unit is similar .
(3) Remove four screws (2) and delivery head
cover (3).
(2) Tag and disconnect all tubing (1, Figure 4-6)
from kink valve assembly (2).
1
EQUIPMENT ALERT
3
On International Delivery Units, the kink
valves are mounted to spacer blocks
instead of the lower housing. Do not remove the
spacer block when replacing the kink valve. Removing the spacer block will release the whip spring.
(3) Remove screw (3) and kink valve assembly (2)
from lower housing (4).
2
B. Installation
MA933000
(1) Install kink valve assembly (2) and secure to
lower housing (4) with screw (3).
Figure 4-5. International Deliery Head Cover
(2) Connect all tubing (1) to kink valve
assembly (2).
(3) Install delivery head cover. (Refer to para 4.2
or 4.3)
© Midmark Corporation 1998 SF-1605
Page 4-3
Printed in U.S.A.
Return To Table Of Contents
SECTION IV
MAINTENANCE / SERVICE
4
1
1
3
2
KA930500
Figure 4-6. Typical Kink Valve (Asepsis 21 Delivery Unit shown)
4.6
Delivery System Purge/Test
Procedure
A. Purging/Testing the System
NOTE
(2) Open air and water shut-off valves (2) in junction box (1).
NOTE
Steps 3 and 4 apply only to units with the Self Contained Water System.
The Asepsis 21 delivery unit is shown in the illustrations. The purging/testing procedure for the International delivery unit is similar.
(3) Open air regulator valve (3) for water bottle (4).
(4) Fill water bottle (4) with distilled water.
(1) Before connecting handpieces, turn on the air,
water, and vacuum utilities to the junction
box (1, Figure 4-7).
(5) Turn Master ON/OFF switch (5) on delivery
head to the ON position.
NOTE
International Delivery Units: The adjustment knobs
on the International delivery head are located on the
lower front and bottom rear of the delivery head. It is
not necessary to remove the delivery head cover in
the following step.
© Midmark Corporation 1998 SF-1605
Page 4-4
Printed in U.S.A.
Return To Table Of Contents
kg/cm
1
2
3
4
5
6
SECTION IV
MAINTENANCE / SERVICE
International Delivery Unit
7
psi
10
5
7
6
4
6
10
7
11
3
9
5
2
8
1
Asepsis 21 Delivery Unit
KA932500
Figure 4-7. Delivery System Purge/Test Procedure
© Midmark Corporation 1998 SF-1605
Page 4-5
Printed in U.S.A.
Return To Table Of Contents
SECTION IV
MAINTENANCE / SERVICE
(6) Remove delivery head cover. (Refer to
para 4.3).
1
(7) Turn the coolant water volume knobs (6) and
coolant air volume knob (7) completely open.
(8) Remove one handpiece hose (8) from
holder (9).
2
(9) Depress foot control to operate coolant water
and drive air for approximately 30 seconds.
(10) Depress coolant water flush button (10) and
hold for 30 seconds.
(11) Repeat steps 8 thru 10 with each handpiece
hose.
3
(12) Operate air and water for doctor’s syringe (11)
and assistant’s syringe (optional item - not
shown) for approximately 30 seconds.
(13) Install handpieces and set coolant water volume knobs (6) and coolant air volume knob (7)
to desired position.
Cuspidor (Earlier Units)
4.7
Cuspidor Bowl
A. Removal
4
(1) Disable unit for repair. (Refer to para 4.1).
KA932200
(2) Remove cup filler tube (1, Figure 4-8) and bowl
rinse tube (2) from cuspidor. [The cup filler tube
and bowl rinse tube are pressure fit; no tools
are required].
EQUIPMENT ALERT
Figure 4-8. Cuspidor Bowl
4.8
A. Removal
The cuspidor bowl (3) is pressure fit to the
lower housing (4) and may be very tight.
Use caution when peforming the following step to
prevent damage to the cuspidor.
(1) Remove cuspidor bowl. (Refer to para 4.7).
(2) Tag and disconnect tubing (1, Figure 4-9) from
water valve (2). [Be sure tubing clamps remain
on tubing; they will be used when new valve is
installed].
(3) Remove cuspidor bowl (3) from lower
housing (4) . [The cuspidor bowl is pressure fit
to the lower housing; no tools are required].
© Midmark Corporation 1998 SF-1605
Cuspidor Water Valve
(3) Remove screw (3) and water valve (2).
Page 4-6
Printed in U.S.A.
Return To Table Of Contents
SECTION IV
MAINTENANCE / SERVICE
(2) To increase cuspidor flush time:
Turn bowl flush adjuster (2) counterclockwise.
1
To decrease cuspidor flush time:
Turn bowl flush adjuster (2) clockwise.
3
(3) Press flush button (3). Repeat procedure until
desired flush time is achieved.
2
KA933200
Figure 4-9. Cuspidor Water Valve
B. Installation
(1) Install water valve (2) and secure with
screw (3).
1
(2) Connect tubing (1) to water valve (2). [Use tubing clamps to secure tubing to water valve fittings].
2
(3) Install cuspidor bowl.
A
4.9
Cuspidor Bowl Flush Valve
Adjustment
Decrease
Flush Time
Increase
Flush Time
A. Adjustment
KA933600i
NOTE
Figure 4-10. Cuspidor Bowl Flush Valve
Adjustment
This procedure adjusts the length of time that the
cuspidor bowl rinse faucet runs after the flush button
is pressed. (Factory setting: 20 seconds).
(1) Insert a large flat-headed screwdriver thru
hole (A, Figure 4-10) in lower housing (1).
© Midmark Corporation 1998 SF-1605 Rev. 2/06
Page 4-7
Printed in U.S.A.
Return To Table Of Contents
SECTION IV
MAINTENANCE / SERVICE
Cuspidor (Present Units)
(3) Remove cuspidor bowl (6).
B. Installation
4.10
Cuspidor Bowl
(1) Position cuspidor bowl (6) over bottom
housing (7) and gently press downward.
A. Removal
(1) Turn master ON/OFF switch [on delivery unit] to
OFF position.
(2) Install cup fill gasket (2) onto cup fill spout (1);
then insert cup fill spout into hole (A).
(3) Install bowl flush gasket (4) onto bowl flush
spout (3); then insert bowl flush spout into
hole (B).
NOTE
To prevent residual water spilling, place finger over
end of spouts when removing.
(4) Install gold trap (5).
(2) Remove cup fill spout (1, Figure 4-11), cup fill
gasket (2), bowl flush spout (3), bowl flush gasket (4), and gold trap (5).
(5) Turn master ON/OFF switch ON and check for
proper operation.
NOTE
4.11
Typical Push Button Valve
Cuspidor bowl is pressure-fit. There is no hardware to
remove.
A. Removal
NOTE
Figure 4-12 shows the bowl flush button valve. The
procedure for the cup fill button valves is similar.
(1) Remove cuspidor bowl. Refer to para 4.10.
(2) Tag and disconnect all tubing connected to
push button valve (1, Figure 4-12).
(3) Remove barbed fitting (2) and gasket (3) from
push button valve (1).
(4) Loosen set screw (4) and remove knob (5).
(5) Unscrew push button valve (1); then remove
valve, washer (6), and trim ring (7) from bottom
housing (8).
B. Installation
(1) Insert push button valve (1) thru washer (6),
and bottom housing (8).
(2) Secure push button valve (1) with trim ring (7).
(3) Install knob (5) and tighten set screw (4).
(4) Install gasket (3) and barbed fitting (2) onto
push button valve (1).
Figure 4-11. Cuspidor Bowl
© Midmark Corporation 1998 SF-1605 Rev. 2/06
Page 4-8
Printed in U.S.A.
Return To Table Of Contents
SECTION IV
MAINTENANCE / SERVICE
Figure 4-13. Cup Fill Water Valve
B. Installation
Figure 4-12. Typical Push Button Valve
(1) Secure cup fill water valve (1) to valve
bracket (3) with screw (4) and washer (5).
(5) Connect all tubing to proper fittings of push button valve (1).
(2) Install valve bracket (3) into bottom housing (6)
and secure with two screws (2).
(6) Install cuspidor bowl. Refer to para 4.10.
4.12
(3) Connect 1/4 in. blue tubing and 1/8 in. red
tubing to proper fittings of cup fill water
valve (1).
Cup Fill Water Valve
A. Removal
(1) Remove cuspidor bowl. Refer to para 4.10.
(2) Tag and disconnect 1/4 in. blue tubing and
1/8 in. red tubing from cup fill water valve (1,
Figure 4-13).
(4) Install cuspidor bowl. Refer to para 4.10.
4.13
A. Removal
(1) Remove cuspidor bowl. Refer to para 4.10.
(3) Remove two screws (2) and valve bracket (3).
(2) Tag and disconnect 1/4 in. blue tubing and 1/8
in. red tubing from bowl flush water valve
(1, Figure 4-14).
(4) Remove screw (4), washer (5), and cup fill
water valve (1) from valve bracket (3).
© Midmark Corporation 1998 SF-1605 Rev. 2/06
Bowl Flush Water Valve
Page 4-9
Printed in U.S.A.
Return To Table Of Contents
SECTION IV
MAINTENANCE / SERVICE
B. Removal
(1) Remove cuspidor bowl. Refer to para 4.10.
Cup
Fill
Bowl
Flush
Figure 4-14. Bowl Flush Water Valve
(3) Remove screw (2) and bowl flush water
valve (1).
Decrease
Fill / Flush
Time
B. Installation
Increase
Fill / Flush
Time
(1) Secure bowl flush water valve (1) to bottom
housing (3) with screw (2).
(2) Connect 1/4 in. blue tubing and 1/8 in. red
tubing to proper fittings of bowl flush water
valve (1).
KA972000i
(3) Install cuspidor bowl. Refer to para 4.10.
Figure 4-15. Timing Valve Adjustment
(4)
4.14
(2) Remove four screws (1, Figure 4-16); then partially separate mounting plate (2) from bottom
housing (3).
Cup Fill / Bowl Flush Timing Valve
A. Adjustment (Refer to Figure 4-15)
(3) Tag and disconnect tubing connected to timing
adjustment valve(s) (4).
(1) To increase the length of time the bowl flush/
cup fill water runs, insert a screwdriver thru
proper hole in bottom housing; then turn
valve adjuster counterclockwise.
(4) Remove mounting screws (5) and timing adjusting valve(s) (4).
(2) To decrease the length of time the bowl flush/
cup fill water runs, insert a screwdriver thru
proper hole in bottom housing; then turn
valve adjuster clockwise.
© Midmark Corporation 1998 SF-1605 Rev. 2/06
Page 4-10
Printed in U.S.A.
Return To Table Of Contents
SECTION IV
MAINTENANCE / SERVICE
Console
C. Installation
(1) Place timing adjusting valve(s) (4) in position
and secure with mounting screws (5).
(2) Connect tubing to proper fitting(s) of timing
adjustment valve (4).
4.15
Console Cover
A. Removal
(1) Disable unit for repair. (Refer to para 4.1).
(2) Loosen thumbscrew (1, Figure 4-17); then
remove console cover (2) by pulling bottom of
cover out and down (as shown).
2
1
3
4
5
2
Figure 4-16. Cup Fill / Bowl Flush Timing Valve
1
(3) Position mounting plate (2) and secure to bottom housing (3) with four screws (1).
(4) Install cuspidor bowl. Refer to para 4.10.
CONSOLE
COVERS
THUMB
SCREWS
KA932300
Figure 4-17. Console Cover
© Midmark Corporation 1998 SF-1605 Rev. 2/06
Page 4-11
Printed in U.S.A.
Return To Table Of Contents
SECTION IV
MAINTENANCE / SERVICE
Carts & Side/Rear Delivery Systems
4.16
B. Installation
(1) Insert stem of caster (1) into base (2) and apply
pressure until caster snaps into place.
Asepsis 21 Duo / Assistant’s
Housing Cover
A. Removal
1
(1) Disable unit for repair. (Refer to para 4.1).
(2) Loosen four thumbscrews (1, Figure 4-18); then
remove side panel (2).
2
(3) Repeat for opposite side if necessary.
1
KA933500
Figure 4-19. Cart Assembly Caster
Arm Assemblies
2
1
4.18
Flex Arm Cover
KA933400
A. Removal
Figure 4-18. Asepsis 21 Duo / Assistant’s
Housing Cover
4.17
(1) Disable unit for repair. (Refer to para 4.1).
NOTE
Cart Assembly Caster
The following step refers to Manual Lock Flex Arm
only.
A. Removal
(2) Unscrew knob (1, Figure 4-20); then remove
knob and washer (2) .
(1) Disable unit for repair. (Refer to para 4.1).
(2) Carefully lay cart on its side.
(3) Remove screw (3) and end cap (4).
(3) Remove caster (1, Figure 4-19) from base (2).
[Casters are pressure fit; no tools are required].
© Midmark Corporation 1998 SF-1605 Rev. 2/06
Page 4-12
(4) Remove flex arm cover (5).
Printed in U.S.A.
Return To Table Of Contents
SECTION IV
MAINTENANCE / SERVICE
3
1
4
2
5
KA932400
Figure 4-20. Flex Arm Cover
Junction Box
4.19
(2) Remove junction box cover. (Refer to
para 4.21).
Junction Box Cover
NOTE
A. Removal
(1) Disable unit for repair. (Refer to para 4.1).
(2) Remove four thumbscrews (1,Figure 4-21) and
junction box cover (2).
Depending upon unit configuration, the number of
tubing connections at the valve block may vary. Disconnect all tubing from the valve block when performing the following step.
(3) Disconnect all tubing (1, Figure 4-22) from
valve block assembly (2).
2
(4) Remove two screws (3) and valve block
assembly (2) from junction box.
2
1
3
KA931900
Figure 4-21. Junction Box Cover
4.20
1
Typical Valve Block
A. Removal
KA933300
(1) Disable unit for repair. (Refer to para 4.1).
© Midmark Corporation 1998 SF-1605 Rev. 2/06
Figure 4-22. Typical Valve Block
Page 4-13
Printed in U.S.A.
Return To Table Of Contents
SECTION IV
MAINTENANCE / SERVICE
Alternative Handpiece Installation
4.21
(4) Disconnect two pieces of 1/8” clear tubing (6)
from 1/8” clear tube (7); then insert straight
barb fitting (8).
Lares® Handpiece Tubing
NOTE
A. Removal of Existing Handpiece Tubing
If removing 3-port tubing, the following Removal step
is not necessary. Go to Installation procedure.
(1) Disconnect three handpiece tubes (1,
Figure 4-23) from kink valve (2).
(5) Disconnect handpiece tube (9) from 1/4” clear
exhaust tube (10).
(2) Disconnect 1/8” orange tube (3) from kink
valve (2).
(3) Disconnect two pieces of 1/8” orange tubing (4)
from 1/8” orange tube (3); then insert straight
barb fitting (5).
4
10
5
3
9
1
2
6
7
8
DA111500i
Figure 4-23. Existing Handpiece Tubing
© Midmark Corporation 1998 SF-1605 Rev. 2/06
Page 4-14
Printed in U.S.A.
Return To Table Of Contents
SECTION IV
MAINTENANCE / SERVICE
B. Installation of Lares® Handpiece Tubing
(1) Route Lares tubing (1, Figure 4-24) up thru
hole in delivery unit; then connect 1/4” clear
tube (2) to kink valve (3) as shown.
(2) Install uni-clamp (4) onto 1/8” blue tube (5) and
connect to kink valve (3) as shown.
(3) Install a 1/8” to 1/4” barb fitting (6) into 1/8”
clear tube (7); then connect to 1/4” clear
exhaust tube (8).
8
6
4
2
7
1
3
5
DA111400i
Figure 4-24. Lares® Handpiece Tubing
© Midmark Corporation 1998 SF-1605 Rev. 2/06
Page 4-15
Printed in U.S.A.
Return To Table Of Contents
SECTION IV
MAINTENANCE / SERVICE
© Midmark Corporation 1998 SF-1605 Rev. 2/06
Page 4-16
Printed in U.S.A.
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
SECTION V
SCHEMATICS AND DIAGRAMS
5.1
Electrical Schematics / Wiring
Diagrams
Figures 5-1 thru 5-8 illustrate the air / water flow from
the main air / water connections thru all valves / components of the delivery system. The systems shown in
these figures contain optional components which may
not be present in all delivery systems (ex. cuspidor, console, etc.).
Figures 5-17 thru 5-20 illustrate typical wiring connections within the major components of the delivery system. Wiring connections may vary slightly depending on
which optional components are included.
Figures 5-21 thru 5-22 illustrate the air / water flow, and
wiring connections for optional accessories.
NOTE
Components such as the cuspidor, console, etc. are
optional. Not all delivery systems have every section
shown in the illustrations, but the air / water flow is
similar.
Figures 5-9 thru 5-16 illustrate typical tubing connections within the major components of the delivery system. Tubing connections may vary slightly depending
on which optional components are included.
NOTE
Figures 5-9 thru 5-16 illustrate typical tubing connections within the major components of the delivery
system. There may be variances in the tubing connections between the major components as this is
done by the technician during installation.
© Midmark Corporation 2000 SF-1605
Page 5-1
Printed in U.S.A.
Page 5-2
AIR
ON / OFF
VALVE
WATER
ON / OFF
VALVE
COOLANT
WATER
TOGGLE
VALVE
MASTER
ON / OFF
SWITCH
VALVE
FACILITY
VACUUM
AIR
REGULATOR
(40 PSI)
AIR - 80 PSI
FOOT CONTROL
DRIVE AIR
FOOT PEDAL
VALVE
ARM
LOCK
CYLINDER
FACILITY
WASTE / DRAIN
PILOT OPERATED
VALVE BLOCK
SCREEN
FILTER
AIR
REGULATOR
(80 PSI)
BLEED
BLEED
ARM
LOCK
CYLINDER
VALVE
COOLANT
WATER
CONTROL
VALVE
BLEED
AIR
PRESSURE
GAGE
CIT
AIR - 40 PSI
DRAIN LINE
WATER
BOTTLE
WATER
BOTTLE
SWITCH
VALVE
CUP FILLER
FAUCET
BLEED
VACUUM LINE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
SYRINGE AIR FLOW
ADJUSTMENT VALVE
KA912000
SYRINGE WATER
SYRINGE AIR
ADJUSTABLE
TIME DELAY
BLEED OFF VALVE
BOWL RINSE
TUBE
WATER SAVER
CONTROL VALVE
CUP FILLER FLOW
ADJUSTMENT VALVE
BOWL RINSE
PUSHBUTTON VALVE
BOWL RINSE FLOW
ADJUSTMENT VALVE
CUP FILLER
PUSHBUTTON
VALVE (ASSISTANT SIDE)
CUP FILLER
PUSHBUTTON
VALVE (PATIENT SIDE)
CONSOLE ASSEMBLY
SI
I
CUSPIDOR ASSEMBLY
0P
Figure 5-1. Flow Schematic - Asepsis Chair Mounted Delivery Unit (w/Self Contained Water System)
[Units UA, UC, UK, & UW built from 1996 thru present]
AIR 80 - 100 PSI
WATER 30 - 50 PSI
JUNCTION BOX
ASSEMBLY
SYRINGE AIR FLOW
ADJUSTMENT VALVE
DOCTOR'S
SYRINGE
HANDPIECE
ON / OFF
VALVE
COOLANT WATER
FLUSH CHECK VALVE
N.C.
COOLANT
WATER
FLUSH
VALVE
COOLANT
WATER
TO ADDITIONAL
FLOW ADJUST- HANDPIECES
MENT VALVE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
AIR
ACTUATOR
ANTIRETRACTION
CHECK
VALVE
KINK
VALVE
COOLANT
WATER
DRIVE
AIR
COOLANT
AIR
COOLANT AIR FLOW
ADJUSTMENT VALVE
BLEED
PS
- 40
YW
ATE
R
DRIVE AIR
FLOW ADJUSTMENT VALVE
BLEED
-8
AI
R
AIR GAGE
CHECK
VALVE
DISTILLED WATER LINE
© Midmark Corporation 2000 SF-1605 Rev. 7/03
SOLIDS
COLLECTOR
HVE
SALI VA
EJECTOR
SYRINGE
ASSISTANT'S
CONSOLE
WATER
QUICK
CONNECT
WATER
VOLUME
CONTROL
VALVE
DELIVERY HEAD ASSEMBLY
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
Page 5-2.1
AIR
ON / OFF
VALVE
WATER
ON / OFF
VALVE
FACILITY
VACUUM
AIR
REGULATOR
(40 PSI)
AIR - 80 PSI
FOOT CONTROL
DRIVE AIR
FOOT PEDAL
VALVE
ARM
LOCK
CYLINDER
FACILITY
WASTE / DRAIN
SCREEN
FILTER
COOLANT
WATER
TOGGLE
VALVE
MASTER
ON / OFF
SWITCH
VALVE
AIR
REGULATOR
(80 PSI)
BLEED
BLEED
ARM
LOCK
CYLINDER
VALVE
COOLANT
WATER
CONTROL
VALVE
BLEED
AIR
PRESSURE
GAGE
CIT
AIR - 40 PSI
DRAIN LINE
WATER
BOTTLE
WATER
BOTTLE
SWITCH
VALVE
CUP FILLER
FAUCET
BLEED
VACUUM LINE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
SYRINGE AIR FLOW
ADJUSTMENT VALVE
KA912001
SYRINGE WATER
SYRINGE AIR
ADJUSTABLE
TIME DELAY
BLEED OFF VALVE
WATER SAVER
CONTROL VALVE
BOWL RINSE
TUBE
CUP FILLER FLOW
ADJUSTMENT VALVE
BOWL RINSE
PUSHBUTTON VALVE
BOWL RINSE FLOW
ADJUSTMENT VALVE
CUP FILLER
PUSHBUTTON
VALVE (ASSISTANT SIDE)
CUP FILLER
PUSHBUTTON
VALVE (PATIENT SIDE)
CONSOLE ASSEMBLY
SI
I
CUSPIDOR ASSEMBLY
0P
Figure 5-1. Flow Schematic - Asepsis Chair Mounted Delivery Unit (w/Self Contained Water System)
[PJ1000, PK1000, PL1000, PM1000 thru present]
AIR 80 - 100 PSI
WATER 30 - 50 PSI
WATER
REGULATOR
(40 PSI)
WATER - 40 PSI
JUNCTION BOX
ASSEMBLY
SYRINGE AIR FLOW
ADJUSTMENT VALVE
DOCTOR'S
SYRINGE
HANDPIECE
ON / OFF
VALVE
COOLANT WATER
FLUSH CHECK VALVE
N.C.
COOLANT
WATER
FLUSH
VALVE
COOLANT
WATER
TO ADDITIONAL
FLOW ADJUST- HANDPIECES
MENT VALVE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
AIR
ACTUATOR
ANTIRETRACTION
CHECK
VALVE
KINK
VALVE
COOLANT
WATER
DRIVE
AIR
COOLANT
AIR
COOLANT AIR FLOW
ADJUSTMENT VALVE
BLEED
PS
- 40
YW
ATE
R
DRIVE AIR
FLOW ADJUSTMENT VALVE
BLEED
-8
AI
R
AIR GAGE
CHECK
VALVE
DISTILLED WATER LINE
© Midmark Corporation 2000 SF-1605 Rev. 7/03
SOLIDS
COLLECTOR
HVE
SALI VA
EJECTOR
SYRINGE
ASSISTANT'S
CONSOLE
WATER
QUICK
CONNECT
WATER
VOLUME
CONTROL
VALVE
DELIVERY HEAD ASSEMBLY
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
Page 5-3
N.C.
HANDPIECE
ON / OFF
VALVE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
AIR 80 - 100 PSI
WATER 30 - 50 PSI
COOLANT
WATER
TOGGLE
VALVE
MASTER
ON / OFF
SWITCH
VALVE
FACILITY
VACUUM
AIR - 80 PSI
FOOT CONTROL
DRIVE AIR
FOOT PEDAL
VALVE
ARM
LOCK
CYLINDER
FACILITY
WASTE / DRAIN
PILOT OPERATED
VALVE BLOCK
SCREEN
FILTER
AIR
REGULATOR
(80 PSI)
BLEED
BLEED
ARM
LOCK
CYLINDER
VALVE
COOLANT
WATER
CONTROL
VALVE
BLEED
AIR
PRESSURE
GAGE
CUP FILLER
FAUCET
DRAIN LINE
BLEED
VACUUM LINE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
SYRINGE AIR FLOW
ADJUSTMENT VALVE
KA912100
SYRINGE WATER
SYRINGE AIR
ADJUSTABLE
TIME DELAY
BLEED OFF VALVE
WATER SAVER
CONTROL VALVE
BOWL RINSE
TUBE
CUP FILLER FLOW
ADJUSTMENT VALVE
BOWL RINSE
PUSHBUTTON VALVE
BOWL RINSE FLOW
ADJUSTMENT VALVE
CUP FILLER
PUSHBUTTON
VALVE (ASSISTANT'S SIDE)
CUP FILLER
PUSHBUTTON VALVE
(PATIENT SIDE)
CONSOLE ASSEMBLY
SI
A
CUSPIDOR ASSEMBLY
0P
Figure 5-2. Flow Schematic - Asepsis Chair Mounted Delivery Unit (w/City Water System)
[Units UA, UC, UK, & UW built from 1996 thru present]
AIR
ON / OFF
VALVE
WATER
REGULATOR
(40 PSI)
WATER - 40 PSI
JUNCTION BOX
ASSEMBLY
WATER
ON / OFF
VALVE
COOLANT
WATER
FLUSH
VALVE
COOLANT AIR FLOW
ADJUSTMENT VALVE
COOLANT
WATER
TO ADDITIONAL
FLOW
ADJUSTMENT HANDPIECES
VALVE
COOLANT WATER
FLUSH CHECK VALVE
SYRINGE AIR FLOW
ADJUSTMENT VALVE
DOCTOR'S
SYRINGE
AIR
ACTUATOR
ANTIRETRACTION
CHECK
VALVE
KINK
VALVE
COOLANT
WATER
DRIVE
AIR
COOLANT
AIR
DRIVE AIR
FLOW ADJUSTMENT VALVE
BLEED
40
PS
I
CIT
YW
ATE
R-
AIR GAGE
CHECK
VALVE
BLEED
-8
IR
© Midmark Corporation 2000 SF-1605 Rev. 7/04
SOLIDS
COLLECTOR
HVE
SALI VA
EJECTOR
SYRINGE
ASSISTANT'S
CONSOLE
WATER
QUICK
CONNECT
WATER
VOLUME
CONTROL
VALVE
DELIVERY HEAD ASSEMBLY
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
Page 5-3.1
N.C.
HANDPIECE
ON / OFF
VALVE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
AIR
ON / OFF
VALVE
COOLANT
WATER
TOGGLE
VALVE
MASTER
ON / OFF
SWITCH
VALVE
FACILITY
VACUUM
AIR - 80 PSI
FOOT CONTROL
DRIVE AIR
FOOT PEDAL
VALVE
ARM
LOCK
CYLINDER
FACILITY
WASTE / DRAIN
SCREEN
FILTER
AIR
REGULATOR
(80 PSI)
BLEED
BLEED
ARM
LOCK
CYLINDER
VALVE
COOLANT
WATER
CONTROL
VALVE
BLEED
AIR
PRESSURE
GAGE
DRAIN LINE
BOWL RINSE
TUBE
CUP FILLER
FAUCET
BLEED
VACUUM LINE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
SYRINGE AIR FLOW
ADJUSTMENT VALVE
KA912101
SYRINGE WATER
SYRINGE AIR
ADJUSTABLE
TIME DELAY
BLEED OFF VALVE
WATER SAVER
CONTROL VALVE
CUP FILLER FLOW
ADJUSTMENT VALVE
BOWL RINSE
PUSHBUTTON VALVE
BOWL RINSE FLOW
ADJUSTMENT VALVE
CUP FILLER
PUSHBUTTON
VALVE (ASSISTANT'S SIDE)
CUP FILLER
PUSHBUTTON VALVE
(PATIENT SIDE)
CONSOLE ASSEMBLY
SI
I
CIT
CUSPIDOR ASSEMBLY
0P
Figure 5-2. Flow Schematic - Asepsis Chair Mounted Delivery Unit (w/City Water System)
[PJ1000, PK1000, PL1000, PM1000 thru present]
AIR 80 - 100 PSI
WATER 30 - 50 PSI
WATER
REGULATOR
(40 PSI)
WATER - 40 PSI
JUNCTION BOX
ASSEMBLY
WATER
ON / OFF
VALVE
COOLANT
WATER
FLUSH
VALVE
COOLANT AIR FLOW
ADJUSTMENT VALVE
COOLANT
WATER
TO ADDITIONAL
FLOW
ADJUSTMENT HANDPIECES
VALVE
COOLANT WATER
FLUSH CHECK VALVE
SYRINGE AIR FLOW
ADJUSTMENT VALVE
DOCTOR'S
SYRINGE
AIR
ACTUATOR
ANTIRETRACTION
CHECK
VALVE
KINK
VALVE
COOLANT
WATER
DRIVE
AIR
COOLANT
AIR
DRIVE AIR
FLOW ADJUSTMENT VALVE
BLEED
PS
- 40
YW
ATE
R
AIR GAGE
CHECK
VALVE
BLEED
-8
AI
R
© Midmark Corporation 2000 SF-1605 Rev. 7/04
SOLIDS
COLLECTOR
HVE
SALI VA
EJECTOR
SYRINGE
ASSISTANT'S
CONSOLE
WATER
QUICK
CONNECT
WATER
VOLUME
CONTROL
VALVE
DELIVERY HEAD ASSEMBLY
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
Page 5-4
AIR 80 - 100 PSI
WATER 30 - 50 PSI
FACILITY
VACUUM
AIR
REGULATOR
(40 PSI)
AIR - 80 PSI
FOOT CONTROL
DRIVE AIR
FOOT PEDAL
VALVE
ARM
LOCK
CYLINDER
FACILITY
WASTE / DRAIN
PILOT OPERATED
VALVE BLOCK
SCREEN
FILTER
AIR
REGULATOR
(80 PSI)
COOLANT
WATER
TOGGLE
VALVE
MASTER
ON / OFF
SWITCH
VALVE
MASTER
ON / OFF
INDICATOR
BLEED
BLEED
ARM
LOCK
CYLINDER
VALVE
COOLANT
WATER
CONTROL
VALVE
BLEED
AIR
PRESSURE
GAGE
CIT
AIR - 40 PSI
DRAIN LINE
BLEED
WATER
BOTTLE
WATER
BOTTLE
SWITCH
VALVE
VACUUM LINE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
SYRINGE AIR FLOW
ADJUSTMENT VALVE
KA912200
SYRINGE WATER
SYRINGE AIR
ADJUSTABLE
TIME DELAY
BLEED OFF VALVE
BOWL RINSE
TUBE
CUP FILLER
FAUCET
WATER SAVER
CONTROL VALVE
CUP FILLER FLOW
ADJUSTMENT VALVE
BOWL RINSE
PUSHBUTTON VALVE
BOWL RINSE FLOW
ADJUSTMENT VALVE
CUP FILLER
PUSHBUTTON
VALVE (ASSISTANT SIDE)
CUP FILLER
PUSHBUTTON
VALVE (PATIENT SIDE)
CONSOLE ASSEMBLY
SI
I
CUSPIDOR ASSEMBLY
0P
Figure 5-3. Flow Schematic - Int’l Chair Mounted Delivery Unit (w/Self Contained Water System)
[Units UA, UC, UK, & UW built from 1996 thru present]
AIR
ON / OFF
VALVE
WATER
ON / OFF
VALVE
JUNCTION BOX
ASSEMBLY
SYRINGE AIR FLOW
ADJUSTMENT VALVE
DOCTOR'S
SYRINGE
HANDPIECE
ON / OFF
VALVE
COOLANT WATER
FLUSH CHECK VALVE
N.C.
COOLANT
WATER
FLUSH
VALVE
COOLANT
WATER
TO ADDITIONAL
FLOW ADJUST- HANDPIECES
MENT VALVE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
AIR
ACTUATOR
ANTIRETRACTION
CHECK
VALVE
KINK
VALVE
COOLANT
WATER
DRIVE
AIR
COOLANT
AIR
COOLANT AIR FLOW
ADJUSTMENT VALVE
BLEED
PS
- 40
YW
ATE
R
DRIVE AIR
FLOW ADJUSTMENT VALVE
BLEED
-8
AI
R
AIR GAGE
CHECK
VALVE
DISTILLED WATER LINE
© Midmark Corporation 2000 SF-1605 Rev. 7/04
SOLIDS
COLLECTOR
HVE
SALI VA
EJECTOR
SYRINGE
ASSISTANT'S
CONSOLE
WATER
QUICK
CONNECT
WATER
VOLUME
CONTROL
VALVE
DELIVERY HEAD ASSEMBLY
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
Page 5-4.1
AIR
ON / OFF
VALVE
WATER
ON / OFF
VALVE
AIR
REGULATOR
(80 PSI)
FACILITY
VACUUM
AIR
REGULATOR
(40 PSI)
AIR - 80 PSI
FOOT CONTROL
DRIVE AIR
FOOT PEDAL
VALVE
ARM
LOCK
CYLINDER
FACILITY
WASTE / DRAIN
SCREEN
FILTER
COOLANT
WATER
TOGGLE
VALVE
MASTER
ON / OFF
SWITCH
VALVE
MASTER
ON / OFF
INDICATOR
BLEED
BLEED
ARM
LOCK
CYLINDER
VALVE
COOLANT
WATER
CONTROL
VALVE
BLEED
AIR
PRESSURE
GAGE
CIT
AIR - 40 PSI
WATER
BOTTLE
WATER
BOTTLE
SWITCH
VALVE
VACUUM LINE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
SYRINGE AIR FLOW
ADJUSTMENT VALVE
CONSOLE ASSEMBLY
DRAIN LINE
BLEED
KA912201
SYRINGE WATER
SYRINGE AIR
ADJUSTABLE
TIME DELAY
BLEED OFF VALVE
BOWL RINSE
TUBE
CUP FILLER
FAUCET
WATER SAVER
CONTROL VALVE
CUP FILLER FLOW
ADJUSTMENT VALVE
BOWL RINSE
PUSHBUTTON VALVE
BOWL RINSE FLOW
ADJUSTMENT VALVE
CUP FILLER
PUSHBUTTON
VALVE (ASSISTANT SIDE)
CUP FILLER
PUSHBUTTON
VALVE (PATIENT SIDE)
CUSPIDOR ASSEMBLY
I
Figure 5-3. Flow Schematic - Int’l Chair Mounted Delivery Unit (w/Self Contained Water System)
[PJ1000, PK1000, PL1000, PM1000 thru present]
AIR 80 - 100 PSI
WATER 30 - 50 PSI
WATER
REGULATOR
(40 PSI)
WATER - 40 PSI
JUNCTION BOX
ASSEMBLY
SYRINGE AIR FLOW
ADJUSTMENT VALVE
DOCTOR'S
SYRINGE
HANDPIECE
ON / OFF
VALVE
COOLANT WATER
FLUSH CHECK VALVE
N.C.
COOLANT
WATER
FLUSH
VALVE
COOLANT
WATER
TO ADDITIONAL
FLOW ADJUST- HANDPIECES
MENT VALVE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
AIR
ACTUATOR
ANTIRETRACTION
CHECK
VALVE
KINK
VALVE
COOLANT
WATER
DRIVE
AIR
COOLANT
AIR
BLEED
COOLANT AIR FLOW
ADJUSTMENT VALVE
BLEED
PS
- 40
YW
ATE
R
DRIVE AIR
FLOW ADJUSTMENT VALVE
A
SI
0P
-8
IR
AIR GAGE
CHECK
VALVE
DISTILLED WATER LINE
© Midmark Corporation 2000 SF-1605 Rev. 7/04
SOLIDS
COLLECTOR
HVE
SALI VA
EJECTOR
SYRINGE
ASSISTANT'S
CONSOLE
WATER
QUICK
CONNECT
WATER
VOLUME
CONTROL
VALVE
DELIVERY HEAD ASSEMBLY
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
Page 5-5
N.C.
HANDPIECE
ON / OFF
VALVE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
AIR
ON / OFF
VALVE
FACILITY
VACUUM
AIR - 80 PSI
FOOT CONTROL
DRIVE AIR
FOOT PEDAL
VALVE
ARM
LOCK
CYLINDER
FACILITY
WASTE / DRAIN
PILOT OPERATED
VALVE BLOCK
SCREEN
FILTER
AIR
REGULATOR
(80 PSI)
COOLANT
WATER
TOGGLE
VALVE
MASTER
ON / OFF
SWITCH
VALVE
MASTER
ON / OFF
INDICATOR
BLEED
BLEED
ARM
LOCK
CYLINDER
VALVE
COOLANT
WATER
CONTROL
VALVE
BLEED
AIR
PRESSURE
GAGE
I
CIT
VACUUM LINE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
SYRINGE AIR FLOW
ADJUSTMENT VALVE
CONSOLE ASSEMBLY
DRAIN LINE
BLEED
KA912300
SYRINGE WATER
SYRINGE AIR
ADJUSTABLE
TIME DELAY
BLEED OFF VALVE
BOWL RINSE
TUBE
CUP FILLER
FAUCET
WATER SAVER
CONTROL VALVE
CUP FILLER FLOW
ADJUSTMENT VALVE
BOWL RINSE
PUSHBUTTON VALVE
BOWL RINSE FLOW
ADJUSTMENT VALVE
CUP FILLER
PUSHBUTTON
VALVE (ASSISTANT'S SIDE)
CUP FILLER
PUSHBUTTON VALVE
(PATIENT SIDE)
CUSPIDOR ASSEMBLY
0P
SI
Figure 5-4. Flow Schematic - Int’l Chair Mounted Delivery Unit (w/City Water System)
[Units UA, UC, UK, & UW built from 1996 thru present]
AIR 80 - 100 PSI
WATER 30 - 50 PSI
WATER
REGULATOR
(40 PSI)
WATER - 40 PSI
JUNCTION BOX
ASSEMBLY
WATER
ON / OFF
VALVE
COOLANT
WATER
FLUSH
VALVE
COOLANT
WATER
TO ADDITIONAL
FLOW
ADJUSTMENT HANDPIECES
VALVE
COOLANT WATER
FLUSH CHECK VALVE
SYRINGE AIR FLOW
ADJUSTMENT VALVE
DOCTOR'S
SYRINGE
AIR
ACTUATOR
ANTIRETRACTION
CHECK
VALVE
KINK
VALVE
COOLANT
WATER
DRIVE
AIR
COOLANT
AIR
COOLANT AIR FLOW
ADJUSTMENT VALVE
BLEED
DRIVE AIR
FLOW ADJUSTMENT VALVE
BLEED
PS
- 40
YW
ATE
R
AIR GAGE
CHECK
VALVE
R
-8
AI
© Midmark Corporation 2000 SF-1605 Rev. 7/04
SOLIDS
COLLECTOR
HVE
SALI VA
EJECTOR
SYRINGE
ASSISTANT'S
CONSOLE
WATER
QUICK
CONNECT
WATER
VOLUME
CONTROL
VALVE
DELIVERY HEAD ASSEMBLY
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
N.C.
Page 5-5.1
HANDPIECE
ON / OFF
VALVE
AIR
ON / OFF
VALVE
WATER
ON / OFF
VALVE
FACILITY
VACUUM
AIR - 80 PSI
FOOT CONTROL
DRIVE AIR
FOOT PEDAL
VALVE
ARM
LOCK
CYLINDER
FACILITY
WASTE / DRAIN
SCREEN
FILTER
AIR
REGULATOR
(80 PSI)
COOLANT
WATER
TOGGLE
VALVE
MASTER
ON / OFF
SWITCH
VALVE
MASTER
ON / OFF
INDICATOR
BLEED
BLEED
ARM
LOCK
CYLINDER
VALVE
COOLANT
WATER
CONTROL
VALVE
BLEED
AIR
PRESSURE
GAGE
DRAIN LINE
BLEED
VACUUM LINE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
SYRINGE AIR FLOW
ADJUSTMENT VALVE
KA912301
SYRINGE WATER
SYRINGE AIR
ADJUSTABLE
TIME DELAY
BLEED OFF VALVE
BOWL RINSE
TUBE
CUP FILLER
FAUCET
WATER SAVER
CONTROL VALVE
CUP FILLER FLOW
ADJUSTMENT VALVE
BOWL RINSE
PUSHBUTTON VALVE
BOWL RINSE FLOW
ADJUSTMENT VALVE
CUP FILLER
PUSHBUTTON
VALVE (ASSISTANT'S SIDE)
CUP FILLER
PUSHBUTTON VALVE
(PATIENT SIDE)
CONSOLE ASSEMBLY
SI
A
I
CIT
CUSPIDOR ASSEMBLY
0P
Figure 5-4. Flow Schematic - Int’l Chair Mounted Delivery Unit (w/City Water System)
[PJ1000, PK1000, PL1000, PM1000 thru present]
AIR 80 - 100 PSI
WATER 30 - 50 PSI
WATER
REGULATOR
(40 PSI)
WATER - 40 PSI
JUNCTION BOX
ASSEMBLY
SYRINGE AIR FLOW
ADJUSTMENT VALVE
DOCTOR'S
SYRINGE
COOLANT
WATER
FLUSH
VALVE
COOLANT AIR FLOW
ADJUSTMENT VALVE
COOLANT
WATER
TO ADDITIONAL
FLOW
ADJUSTMENT HANDPIECES
VALVE
COOLANT WATER
FLUSH CHECK VALVE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
AIR
ACTUATOR
ANTIRETRACTION
CHECK
VALVE
KINK
VALVE
COOLANT
WATER
DRIVE
AIR
COOLANT
AIR
DRIVE AIR
FLOW ADJUSTMENT VALVE
BLEED
PS
- 40
YW
ATE
R
AIR GAGE
CHECK
VALVE
BLEED
-8
IR
© Midmark Corporation 2000 SF-1605 Rev. 7/04
SOLIDS
COLLECTOR
HVE
SALI VA
EJECTOR
SYRINGE
ASSISTANT'S
CONSOLE
WATER
QUICK
CONNECT
WATER
VOLUME
CONTROL
VALVE
DELIVERY HEAD ASSEMBLY
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
Page 5-6
COOLANT
WATER
FLUSH
VALVE
AIR
ON / OFF
VALVE
WATER
ON / OFF
VALVE
FACILITY
VACUUM
AIR
REGULATOR
(40 PSI)
AIR - 80 PSI
FOOT CONTROL
DRIVE AIR
FOOT PEDAL
VALVE
COOLANT
WATER
ON / OFF
VALVE
FACILITY
WASTE / DRAIN
PILOT OPERATED
VALVE BLOCK
SCREEN
FILTER
AIR
REGULATOR
(80 PSI)
COOLANT
WATER
TOGGLE
VALVE
MASTER
ON / OFF
SWITCH
VALVE
MASTER
ON / OFF
INDICATOR
BLEED
BLEED
ARM
LOCK
CYLINDER
BLEED
COOLANT WATER
FLOW ADJUSTMENT VALVE
COOLANT
WATER
CONTROL
VALVE
BLEED
AIR
PRESSURE
GAGE
CIT
AIR - 40 PSI
BOWL RINSE
PUSHBUTTON
VALVE
BOWL RINSE FLOW
ADJUSTMENT VALVE
ADJUSTABLE
TIME DELAY
BLEED OFF VALVE
DRAIN LINE
BLEED
WATER
BOTTLE
WATER
BOTTLE
SWITCH
VALVE
CUP FILLER
FAUCET
VACUUM LINE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
SYRINGE AIR FLOW
ADJUSTMENT VALVE
KA912400
SYRINGE WATER
SYRINGE AIR
BOWL RINSE
TUBE
CUP FILLER FLOW
ADJUSTMENT VALVE
WATER SAVER
CONTROL VALVE
CUP FILLER
PUSHBUTTON
VALVE (ASSISTANT SIDE)
CUP FILLER
PUSHBUTTON
VALVE (PATIENT SIDE)
CONSOLE ASSEMBLY
SI
A
CUSPIDOR ASSEMBLY
0P
Figure 5-5. Flow Schematic - Int’l Chair Mounted Delivery Unit (w/Self Contained Water System)
[Units built prior to 1996]
AIR 80 - 100 PSI
WATER 30 - 50 PSI
JUNCTION BOX
ASSEMBLY
SYRINGE AIR FLOW
ADJUSTMENT VALVE
DOCTOR'S
SYRINGE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
ARM
LOCK
CYLINDER
VALVE
COOLANT
WATER
TO ADDITIONAL
FLOW ADJUST- HANDPIECES
KINK
MENT VALVE
VALVE
(MECHANICALLY
ACTUATED)
COOLANT WATER
FLUSH CHECK VALVE
ANTIRETRACTION
CHECK
VALVE
COOLANT
WATER
DRIVE
AIR
COOLANT
AIR
COOLANT AIR FLOW
ADJUSTMENT VALVE
BLEED
PS
I
- 40
YW
ATE
R
DRIVE AIR
FLOW ADJUSTMENT VALVE
BLEED
-8
IR
AIR GAGE
CHECK
VALVE
DISTILLED WATER LINE
© Midmark Corporation 2000 SF-1605
SOLIDS
COLLECTOR
HVE
SALI VA
EJECTOR
SYRINGE
ASSISTANT'S
CONSOLE
WATER
QUICK
CONNECT
WATER
VOLUME
CONTROL
VALVE
DELIVERY HEAD ASSEMBLY
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
Page 5-7
SYRINGE WATER FLOW
ADJUSTMENT VALVE
AIR
ON / OFF
VALVE
FACILITY
VACUUM
AIR - 80 PSI
FOOT CONTROL
DRIVE AIR
FOOT PEDAL
VALVE
COOLANT
WATER
ON / OFF
VALVE
BLEED
ARM
LOCK
CYLINDER
FACILITY
WASTE / DRAIN
PILOT OPERATED
VALVE BLOCK
SCREEN
FILTER
AIR
REGULATOR
(80 PSI)
COOLANT
WATER
TOGGLE
VALVE
MASTER
ON / OFF
SWITCH
VALVE
MASTER
ON / OFF
INDICATOR
BLEED
BLEED
ARM
LOCK
CYLINDER
VALVE
COOLANT WATER
FLOW ADJUSTMENT VALVE
COOLANT
WATER
CONTROL
VALVE
BLEED
AIR
PRESSURE
GAGE
BOWL RINSE FLOW
ADJUSTMENT VALVE
BLEED
VACUUM LINE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
SYRINGE AIR FLOW
ADJUSTMENT VALVE
CONSOLE ASSEMBLY
KA912500
SYRINGE WATER
SYRINGE AIR
BOWL RINSE
TUBE
ADJUSTABLE
TIME DELAY
BLEED OFF VALVE
DRAIN LINE
BOWL RINSE
PUSHBUTTON
VALVE
CUP FILLER
FAUCET
CUP FILLER FLOW
ADJUSTMENT VALVE
WATER SAVER
CONTROL VALVE
CUP FILLER
PUSHBUTTON
VALVE (ASSISTANT'S SIDE)
CUP FILLER
PUSHBUTTON VALVE
(PATIENT SIDE)
CUSPIDOR ASSEMBLY
Figure 5-6. Flow Schematic - Int’l Chair Mounted Delivery Unit (w/City Water System)
[Units built prior to 1996]
AIR 80 - 100 PSI
WATER 30 - 50 PSI
WATER
REGULATOR
(40 PSI)
WATER - 40 PSI
JUNCTION BOX
ASSEMBLY
WATER
ON / OFF
VALVE
COOLANT
WATER
FLUSH
VALVE
COOLANT
WATER
TO ADDITIONAL
FLOW
ADJUSTMENT HANDPIECES
VALVE
COOLANT WATER
FLUSH CHECK VALVE
SYRINGE AIR FLOW
ADJUSTMENT VALVE
DOCTOR'S
SYRINGE
ANTIRETRACTION
CHECK
VALVE
KINK
VALVE
(MECHANICALLY
ACTUATED)
COOLANT
WATER
DRIVE
AIR
COOLANT
AIR
COOLANT AIR FLOW
ADJUSTMENT VALVE
BLEED
DRIVE AIR
FLOW ADJUSTMENT VALVE
BLEED
40
PS
I
CIT
YW
ATE
R-
AIR GAGE
CHECK
VALVE
A
SI
0P
-8
IR
© Midmark Corporation 2000 SF-1605
SOLIDS
COLLECTOR
HVE
SALI VA
EJECTOR
SYRINGE
ASSISTANT'S
CONSOLE
WATER
QUICK
CONNECT
WATER
VOLUME
CONTROL
VALVE
DELIVERY HEAD ASSEMBLY
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
SYRINGE WATER FLOW
ADJUSTMENT VALVE
Page 5-8
AIR
ON / OFF
VALVE
WATER
ON / OFF
VALVE
PILOT OPERATED
VALVE BLOCK
SCREEN
FILTER
AIR
REGULATOR
(80 PSI)
MASTER
ON / OFF
SWITCH
VALVE
AIR
REGULATOR
(40 PSI)
AIR - 80 PSI
COOLANT WATER
FLOW ADJUSTMENT VALVE
COOLANT
WATER
CONTROL
VALVE
BLEED
AIR
PRESSURE
GAGE
DRIVE AIR
FOOT PEDAL
VALVE
FOOT CONTROL
COOLANT
WATER
TOGGLE
VALVE
WATER
QUICK
CONNECT
AIR - 40 PSI
WATER
VOLUME
CONTROL
VALVE
WATER
BOTTLE
WATER
BOTTLE
SWITCH
VALVE
SYRINGE AIR FLOW
ADJUSTMENT VALVE
ARM
LOCK
CYLINDER
VALVE
(WALL
MOUNT
ONLY)
BLEED
COOLANT
WATER
FLUSH
VALVE
FACILITY
VACUUM
ARM
LOCK
CYLINDER
(WALL
MOUNT
ONLY)
SYRINGE WATER FLOW
ADJUSTMENT VALVE
SYRINGE WATER
SYRINGE AIR
KA912600
SOLIDS
COLLECTOR
HVE
SALI VA
EJECTOR
SYRINGE
ASSISTANT'S CONSOLE
Figure 5-7. Flow Schematic - Duo Cart / Wall Mounted Delivery Unit (w/Self Contained Water System)
[Units built prior to 1996]
AIR 80 - 100 PSI
WATER
30 - 50 PSI
CONNECTION BOX
ASSEMBLY
MASTER
WATER
ON / OFF
VALVE
HANDPIECE
ON / OFF
VALVE
BLEED
COOLANT
WATER
TO ADDITIONAL
FLOW ADJUST- HANDPIECES
MENT VALVE
COOLANT AIR FLOW
ADJUSTMENT VALVE
COOLANT WATER
FLUSH CHECK VALVE
N.C.
SYRINGE AIR FLOW
ADJUSTMENT VALVE
DOCTOR'S
SYRINGE
AIR
ACTUATOR
ANTIRETRACTION
CHECK
VALVE
KINK
VALVE
COOLANT
WATER
DRIVE
AIR
COOLANT
AIR
DRIVE AIR
FLOW ADJUSTMENT VALVE
BLEED
AIR GAGE
CHECK
VALVE
BLEED
© Midmark Corporation 2000 SF-1605
DISTILLED
WATER LINE
DELIVERY HEAD ASSEMBLY
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
Page 5-9
AIR
ON / OFF
VALVE
WATER
ON / OFF
VALVE
MASTER
ON / OFF
SWITCH
VALVE
PILOT OPERATED
VALVE BLOCK
SCREEN
FILTER
AIR
REGULATOR
(80 PSI)
BLEED
AIR - 80 PSI
COOLANT WATER
FLOW ADJUSTMENT VALVE
COOLANT
WATER
CONTROL
VALVE
BLEED
AIR
PRESSURE
GAGE
DRIVE AIR
FOOT PEDAL
VALVE
FOOT CONTROL
COOLANT
WATER
TOGGLE
VALVE
WATER
QUICK
CONNECT
WATER
VOLUME
CONTROL
VALVE
SYRINGE AIR FLOW
ADJUSTMENT VALVE
ARM
LOCK
CYLINDER
VALVE
(WALL
MOUNT
ONLY)
BLEED
COOLANT
WATER
FLUSH
VALVE
FACILITY
VACUUM
ARM
LOCK
CYLINDER
(WALL
MOUNT
ONLY)
SYRINGE WATER FLOW
ADJUSTMENT VALVE
SYRINGE WATER
SYRINGE AIR
KA912700
SOLIDS
COLLECTOR
HVE
SALI VA
EJECTOR
SYRINGE
ASSISTANT'S CONSOLE
Figure 5-8. Flow Schematic - Duo Cart / Wall Mounted Delivery Unit (w/City Water System)
[Units built prior to 1996]
AIR 80 - 100 PSI
CONNECTION BOX
ASSEMBLY
MASTER
WATER
ON / OFF
VALVE
HANDPIECE
ON / OFF
VALVE
COOLANT WATER
FLUSH CHECK VALVE
SYRINGE WATER FLOW
ADJUSTMENT VALVE
WATER
30 - 50 PSI
COOLANT AIR FLOW
ADJUSTMENT VALVE
COOLANT
WATER
TO ADDITIONAL
FLOW ADJUST- HANDPIECES
MENT VALVE
DRIVE AIR
FLOW ADJUSTMENT VALVE
N.C.
SYRINGE AIR FLOW
ADJUSTMENT VALVE
DOCTOR'S
SYRINGE
AIR
ACTUATOR
ANTIRETRACTION
CHECK
VALVE
KINK
VALVE
COOLANT
WATER
DRIVE
AIR
COOLANT
AIR
AIR GAGE
CHECK
VALVE
BLEED
© Midmark Corporation 2000 SF-1605
BLEED
DELIVERY HEAD ASSEMBLY
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
© Midmark Corporation 2000 SF-1605 Rev 9/10
Page 5-10
OR
BL
BL
BL
W
SYRINGE
SYRINGE WATER FLOW
SYRINGE AIR FLOW
COOLANT
WATER
COOLANT
WATER FLUSH
SYRINGE
SYRINGE AIR
W
OR
BL
OR
Y
HANDPIECE
TUBING
CL
R
CL
HANDPIECE
CL
Y
BL
BL
CL
Y
Y
W
BL
X
OR
R
R
CL
CL
W
GR
MASTER
ON / OFF
VALVE
R
Z V UW
TUBING TO
ARM
R
V
T
BR
BL
CL
S
R
CL
R
CL
CL W
BL
BR
CL
OR
W
CL
R
HANDPIECE
CL
HANDPIECE
TUBING
AIR PRESSURE
GAGE
AIR / OIL
SEPARATOR
HANDPIECE
CL
OR
CL
CL
ARM LOCK
CYLINDER
LOCATED IN
ARM
BL
CL
OR
LEGEND
BL - BLUE
BR - BROWN
CL - CLEAR
GR - GREEN
OR - ORANGE
R - RED
V - VIOLET
W - WHITE
Y - YELLOW
AF207100
HANDPIECE HOLDER
AIR ACTUATOR VALVE
COOLANT AIR
FLOW VALVE
FLEX ARM
LOCK VALVE
DRIVE AIR
FLOW VALVE
COOLANT WATER
FLUSH CHECK VALVE
COOLANT WATER
FLOW VALVE
PILOT OPERATED
KINK VALVE
ANTI-RETRACTION
CHECK VALVE
CHECK VALVE
TO AIR GAGE
COOLANT WATER
DRIVE AIR
COOLANT AIR
EXHAUST AIR
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Used only on Asepsis 21 Delivery Units which are mounted on a Knight Dental Chair.
Figure 5-10. Tubing Diagram - Typical Asepsis 21 Delivery Head
Applies to Units with Serial Number Prefixes UA, UC, UW, PJ, PK, PL & V2200 thru V810792
Printed in U.S.A.
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Used with Asepsis 21 Delivery Unit which are mounted on a Knight,
Midmark UltraTrim or Midmark UltraComfort Dental Chair.
Extra
Extra
Extra
Figure 5-10. Tubing Diagram - Typical Asepsis 21 Delivery Head
Applies to Units with Serial Number V810793 thru Present
© Midmark Corporation 2000 SF-1605 Rev 6/19
Page 5-10.1
Printed in U.S.A.
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Used only on International Delivery Units which are mounted on a Knight Dental Chair.
Figure 5-11. Tubing Diagram - Typical Int’l Delivery Head
Applies to Units with Serial Number Prefixes UA, UC, UW, PJ, PK, PL & V2200 thru V810792
© Midmark Corporation 2000 SF-1605 Rev. 9/10
Page 5-11
Printed in U.S.A.
Coolant
Water
1/8" Blue
Push
1/8" Yellow
1/8" Red
Coolant
Water
T
B
1/8" Red
1/8" Blue
1/8" White
1/8" Blue
1/8" Clear
1/8" Green
1/8" Red
Kink
Valve
CA CW
DA
1/8" Orange
Drive Air
Pressure Gauge
Pilot Air
3-way
N.C.pilot
Operated
Pressure
Indicator
Flush Valve (N.C.)
Manual Push
Button
Pilot Air
From
Master
Switch
Syringe
Syringe
Water
Air
Syringe
Air
1/8" Blue
Master
On/Off
Valve
Drive Air
On / Off
1/8" Blue
Bleed
Drive Air
1/4" Clear
T
B
1/8"
Wht.
1/8" White
1/8" Red
1/8" Red
Kink
Valve
T
CA CW
DA
B
1/8" Clear
Drive Air
Coolant Air
Pinch
Valve
Exhaust Air
1/8" Blue
1/8" Clear
Coolant Water Valves
1/8" Blue
1/8" White
1/8" Brown
1/8" Clear
1/8" Green
1/8" Red
Kink
Valve
CA CW
DA
1/4" Clear
1/8" Green
Pinch
Valve
1/4" Clear
Coolant Air
UMBILICAL
1/8" Purple
1/4" Clear
1/8" Blue
1/8" Clear
1/4" Clear
1/8" Brown
1/4" Clear
1/8" Red
1/8" Clear
1/8" Blue
Drive Air
1/8" White
Pinch
Valve
1/8" Blue
Coolant Water
Control
Valve
1/8" Red
1/8" Red
1/4" Clear
1/8" Green
Pinch
Valve
Bleed
Arm Lock
Switch
1/4" Clear
1/8" Blue
1/8" Blue
Double
Pinch
Valve
1/8" Red
1/8" Blue
1/8" Blue
1/8" White
1/8" Green
Water
1/8" Blue
1/8" Red
1/8" Clear
1/8" Blue
1/4" Clear
1/8" Blue
Page 5-11.1
1/8" Red
1/4" Clear
1/8" Clear
© Midmark Corporation 2000 SF-1605
1/8" Wht.
1/8" Yellow
Check
Valve
B
DA231601i
T
B
T
Push
Open
CW- Coolant Water
DA - Drive Air
CA - Coolant Air
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Used with International Delivery Unit which are mounted on a Knight,
Midmark UltraTrim or Midmark UltraConfort Dental Chair.
Figure 5-11. Tubing Diagram - Typical Int’l Delivery Head
Applies to Units with Serial Number V810793 thru Present
Printed in U.S.A.
1/8" Green
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
WATER
SAVER
CONTROL
CUP FILLER
FLOW
ADJUSTMENT
(FACTORY SET)
1/4"
CUP FILLER
PUSH
BUTTONS
1/8"
1/8"
BOWL RINSE
PUSH BUTTON
BOWL RINSE
FLOW ADJUSTMENT
DRAIN
1/8"
1/4"
DRAIN VENT
1/4"
TIME BOWL RINSE ADJUSTMENT
A B C
AF2072
FROM CONSOLE
Figure 5-11. Tubing Diagram - Typical Cuspidor
Applies to Units with Serial Number Prefixes UA, UC, UW, PJ, PK, PL to V245614.
© Midmark Corporation 2000 SF-1605 3/06
Page 5-12
Printed in U.S.A.
To
Cup Fill
Faucet
© Midmark Corporation 2000 SF-1605 Rev.12/06
1/8
Red
Drain
Vent
Page 5-12.1
Drain
5/8
Pilot
Cup Fill Water
Flow Control
Needle Valve
Drain
Vent
1/8
White
Shuttle
Valve
1/8
White
To Bowl
Flush
Faucet
Bowl Flush
Control Pinch
Valve
30
PSI
Water
1/8 Yellow
1/4 Blue
Bowl
Flush
Water
Valve
1/4
Clear
Normally Closed
2-way Manual
Momentary Valve
Cup Filler
1/4 Blue
1/8
Yellow
1/8 Red
80 PSI
Air
Normally Closed
2-way Manual
Momentary Valve
30 PSI
Filtered
City Water
1/4
Blue
Push
1/8
Yellow
1/8
Yellow
1/8 Yellow
From Console
1/8
Yellow
80 PSI
Regulated
Filtered Air
1/4
Clear
1/4 Blue
30
PSI
Water
Cup Fill
Water
Valve
Cup Filler
Push
1/8
Red
Cup Fill
Timing
Adjustment
Valve
Drain
5/8
1/8
Red
Drain
Bowl
Flush Air
Timing
Needle
Valve
1/8
Yellow
Cuspidor
Cuspidor with
Water Saver
1/8
Red
llow
1/8 Ye
80 PSI Air
1/8 Red
1/8
Yellow
80
PSI
Air
80 PSI Air
Bowl
Flush
DA175900i
80 PSI Air
1/8 Red
Push
Normally Closed
2-way Manual
Momentary Valve
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Figure 5-11.1. Tubing Diagram - Typical Cuspidor
From Serial Number V245615 to V352569
Printed in U.S.A.
© Midmark Corporation 2000 SF-1605
30 PSI
Water
To
Cup Fill
Faucet
Page 5-12.2
1/8
Yellow
Drain
Drain
Vent
1/4
Clear
1/8
Red
Cup Fill Water
Flow Control
Needle Valve
Bowl Flush
Control Pinch
Valve
1/4 Blue
1/8
Red
1/8
Red
2 - Way Shuttle
Valve
Valves
1/8 Yellow
1/8 Red
TPW 1802 Rev. D
5/8
Cup Filler
30 PSI
Filtered
City Water
1/4
Blue
Push
1/4 Blue
1/4 Blue
80 PSI Air
Cup Filler
1/8
Yellow
1/8
Yellow
1/8
Yellow
From Console
1/8
Yellow
80 PSI
Regulated
Filtered Air
1/4
Clear
Drain
Vent
1/4 Blue
Cup Fill
Water
Valve
Push
30 PSI
Water
1/4 Blue
1/8
Red
Cup Fill
Timing
Adjustment
Valve
1/8
Red
Drain
To Bowl
Flush
Faucet
1/8
Red
Drain
5/8
1/8
Yellow
1/8
Yellow
80
PSI
Air
80 PSI Air
1/8 Red
Cuspidor
80 PSI Air
1/8 Red
Bowl
Flush Air
Timing
Needle
Valve
Cuspidor with
Water Saver
Bowl Flush
Water Valve
1/8
Red
80 PSI Air
1/8 Yellow
Bowl
Flush
DA175901i
Push
SECTION V
SCHEMATICS AND DIAGRAMS
Return To Table Of Contents
Figure 5-11.2. Tubing Diagram - Typical Cuspidor
From Serial Number V352570 to Present
Printed in U.S.A.
BR
1/8"
© Midmark Corporation 2000 SF-1605 Rev.8/11
BL
1/8"
ACCESSORIES
WATER BOTTLE
Page 5-13
V
U
W
S
1/8" BR
1/4" BL
RIBBED
TUBE
BL
1/8"
1/8" BL
P
E
SYRINGE
J
O
L
M
C
Q
DRAIN
D
H
UMBILICAL
K
BL
1/4"
B
G
VACUUM
N
BL
1/8"
1/8" BL
CITY WATER
OPTION
WATER
BOTTLE
SWITCH
WATER QUICK
CONNECT
WATER
VOLUME
CONTROL
SOLIDS
COLLECTOR
CL
1/4"
DA156600i
BL - BLUE
BR - BROWN
CL - CLEAR
GR - GREEN
OR - ORANGE
R - RED
V - VIOLET
W - WHITE
Y - YELLOW
LEGEND
AIR QUICK
CONNECT
(OPTIONAL)
Optional
SYRINGE
SALIVA EJECTOR
Figure 5-12. Tubing Diagram - Typical Console (w/Self Contained Water System)
1/4" CL
Y
1/8"
1/8" R
BL
1/8"
1/8" V
1/8" OR
1/8" GR
BL
1/8"
1/8" BR
1/8" CL
1/8" W
Y
Z
T
R
X
1/8" BL
A
TO CUSPIDOR
(OPTIONAL)
HVE
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
© Midmark Corporation 2000 SF-1605 Rev.3/06
Page 5-14
T
Y
R
W
V
U
S
Z
X
1/8
BL
V
R
BL
1/4"
1/8"
BL
1/8"
1/8
1/8
1/4"
RIBBED
TUBE
Y
Y
E
P
SYRINGE
BL
BL
1/4"
Q HG
M D
UMBILICAL
K L
O
C
DRAIN
A B
VACUUM
N
BL
1/4" BL
CITY WATER
OPTION
WATER QUICK
CONNECT
WATER
VOLUME
CONTROL
SOLIDS
COLLECTOR
SYRINGE
SALIVA EJECTOR
Figure 5-13. Tubing Diagram - Typical Console (w/City Water System)
OR
1/8
Y
1/8
GR
1/8
1/8
1/8
BL
BL
1/8
1/8
A
TO CUSPIDOR
(OPTIONAL)
KA913700
BL - BLUE
BR - BROWN
CL - CLEAR
GR - GREEN
OR - ORANGE
R - RED
V - VIOLET
W - WHITE
Y - YELLOW
LEGEND
HVE
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
ACCESSORIES
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
H L
K
J
Q
G
P
M
E D F
N
O
LEGEND
BL - BLUE
BR - BROWN
CL - CLEAR
GR - GREEN
OR - ORANGE
R - RED
V - VIOLET
W - WHITE
Y - YELLOW
1/8" ORANGE TUBE
COOLANT WATER
PILOT AIR
TO FOOT
CONTROL
1/4" or 5/16" CLEAR
TUBE DRIVE AIR OUT
5/16" CLEAR
TUBE
FOOT CONTROL
TUBING INLET AIR
(5/16" Clear
w / Black Dash)
ELECTRICAL
BOX
OR
CL
OR
CL
UMBILICAL
CLAMP
VACUUM
Y
2" x 4"
BOX FOR
POWER
SUPPLY
(not supplied)
Y
1/8" RED TUBE
PILOT AIR
MASTER VALVE
BL
GR
CL
W
WHITE
CLEAR
GREEN
BLUE
WASTE
1/8" VIOLET TUBE
NON-CONTROLLED
AIR MASTER VALVE
BL
TUBING FOR
OPTIONS
1/8" BROWN TUBE
AIR TO DISTILLED
WATER BOTTLE
1/4" BLUE TUBE
CUSPIDOR
AIR
R
1/8" YELLOW
TUBE FOR
SYRINGE AIR
V
BR
R
WATER
Optional
1/8" YELLOW or
WHITE Tube for
Cuspidor.
C
THESE
TUBES ARE
OPTIONAL
AND ARE
USED WITH
THE
CUSPIDOR
OR OTHER
OPTIONS
R
AIR
80 PSI
Y
AIR REGULATOR
FOR DISTILLED
WATER BOTTLE
VALVE BLOCK
V
Y
R
CL
AIR AND WATER TUBING
CONNECT TO LABELED FITTINGS
ON THE UNDERSIDE OF THE
VALVE BLOCK
DA170600i
Figure 5-14. Tubing Diagram - Typical Junction Box (w/Self Contained Water System)
[Units UA, UC, UK, & UW built from 1996 thru present]
© Midmark Corporation 2000 SF-1605 Rev.3/06
Page 5-15
Printed in U.S.A.
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
H L
K
P Q G
M
E D F
N
O
1/8" ORANGE TUBE
COOLANT WATER
PILOT AIR
TO FOOT
CONTROL
1/4" or 5/16" CLEAR
TUBE DRIVE AIR OUT
5/16" CLEAR
TUBE
FOOT CONTROL
TUBING INLET AIR
(5/16" Clear
w / Black Dash)
CL
CL
ELECTRICAL
BOX
CL
OR
OR
VACUUM
UMBILICAL
CLAMP
2" x 4"
BOX FOR
POWER
SUPPLY
(not supplied)
Y
1/8" RED TUBE
PILOT AIR
MASTER VALVE
BL
CL
Y
W
WHITE
CLEAR
GREEN
BLUE
WASTE
1/8" VIOLET TUBE
NON-CONTROLLED
AIR MASTER VALVE
BL
GR
TUBING
FOR OPTIONS
1/4" BLUE TUBE
CUSPIDOR
AIR
1/8" YELLOW
TUBE FOR
SYRINGE AIR
V
OPTIONAL 1/8"
YELLOW or WHITE
TUBING for CUSPIDOR
VALVE
BLOCK
WATER
R
1/8" BLUE TUBE
CITY WATER
THESE
TUBES ARE
OPTIONAL
AND ARE
USED WITH
THE
CUSPIDOR
OR OTHER
OPTIONS
C
AIR
80 PSI
Y
WATER
40 PSI
Y
CL
V
AIR AND WATER TUBING
CONNECT TO LABELED FITTINGS
ON THE UNDERSIDE OF THE
VALVE BLOCK
DA170700i
Figure 5-15. Tubing Diagram - Typical Junction Box (w/City Water System)
[Units UA, UC, UK, & UW built from 1996 thru present]
© Midmark Corporation 2000 SF-1605 Rev.3/06
Page 5-16
Printed in U.S.A.
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
H K
F
Q
N
P
L
N
E D O
M
G
J
LEGEND
BL - BLUE
BR - BROWN
CL - CLEAR
GR - GREEN
OR - ORANGE
R - RED
V - VIOLET
W - WHITE
Y - YELLOW
GY -GREY
1/8" ORANGE TUBE
COOLANT WATER
PILOT AIR
TO FOOT
CONTROL
FOOT CONTROL
TUBING INLET AIR
(5/16" Clear
w/ Black Dash)
1/4" or 5/16"CLEAR
TUBING DRIVE AIR OUT
ELECTRICAL
BOX
OR
CL
OR
VACUUM
CL
UMBILICAL
CLAMP
2" x 4"
BOX FOR
POWER
SUPPLY
(not supplied)
CL
1/8" RED TUBE
UNREGULATED
PILOT AIR
MASTER VALVE
BL
GR
CL
W
WASTE
TUBING
OPTIONAL
1/8" BLUE TUBE
FOR CITY WATER
1/8" YELLOW
or WHITE TUBE
FOR CUSPIDOR
(OPTIONAL)
BL
1/4" BLUE TUBE
FOR CUSPIDOR
(OPTIONAL)
1/8" BROWN TUBE
AIR TO DISTILLED
WATER BOTTLE
WATER
30 PSIG
V
OPTIONAL
REGULATOR
FOR CITY WATER
30 PSI
BR
BL
C
R
Y
AIR
80 PSIG
AIR
R
CL
WATER
AIR
30 PSIG
Y
R
AIR REGULATOR
FOR DISTILLED
WATER BOTTLE
(PRE-SET TO 30 PSI)
1/8" YELLOW
TUBE FOR
SYRINGE AIR
DA170801i
Figure 5-15.1 Tubing Diagram - Typical Junction Box (w/City Water System)
PJ1000, PK1000, PL1000, PM1000 thru present]
© Midmark Corporation 2000 SF-1605 Rev.3/08
Page 5-16.1
Printed in U.S.A.
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Throttle
Valve
(Rib)
Air
Regulator
Tubing
Layout
Air
Regulator
1/4 Grey (Ribbed)
1/8 Grey
(Chip Air)
Clear
Wet / Dry
Toggle
1/8 Orange
Clear
Clear
Clear
1/8 Grey
80
PSI
1/8 Green
Foot Control
1/8
Green
1/8 Green
1/8
Yellow
80
PSI
80
PSI
Foot Control
1/8 Green
To Handpiece Coolant Air (1/8 Green)
To Handpiece Coolant Air (1/8 Green)
1/8 Orange
1/8 Orange
To Pilot Air for Coolant Water (1/8 Orange)
To Pilot Air for Coolant Water (1/8 Orange)
1/4 Clear
5/16" Clear
To Handpiece Drive Air (1/4 Clear)
80 PSI
1/8 Yellow
Throttle
Valve
5/16" Clear
Wet / Dry
Toggle
1/8 Grey (above 1/4 ribbed)
80
PSI
5/16"
Clear
5/16"
Clear
1/8
w/ Dash
BN
5/16" Clear
(w/ Black Dash)
1/4 Grey (Plain)
1/8
Yellow
1/8 OR
1/8
GN
80 PSI
80 PSI
1/8 Yellow
80 PSI
Air to Syringe & Cuspidor
To Handpiece Drive Air
(5/16" Clear)
Air to Syringe & Cuspidor
Filter / Regulated Air
Filter / Regulated Air
1/4" or 5/16"
CLEAR TUBE
DRIVE AIR OUT
TO FOOT
CONTROL
1/8" ORANGE TUBE
COOLANT WATER
PILOT AIR
UMBILICAL
ELECTRICAL
BOX
5/16"
CLEAR
TUBE
FOOT CONTROL
TUBING INLET AIR
(5/16" Clear w/
Black Dash)
VACUUM
Blue
Green
4" x 4"
BOX FOR
POWER
SUPPLY
(not
supplied)
1/8" RED TUBE
PILOT AIR
MASTER VALVE
WASTE
White
Clear
1/4" BLUE TUBE
CUSPIDOR
(Optional)
TUBING FOR
OPTIONS
1/8" BROWN TUBE
1/8" PURPLE TUBE
NON-CONTROLLED
AIR MASTER VALVE
1/8" BROWN TUBE
AIR TO DISTILLED
WATER BOTTLE
WATER
AIR
AIR REGULATOR
FOR DISTILLED
WATER BOTTLE
1/8" RED TUBE
1/8" YELLOW or
WHITE TUBE
(Tagged w/ "C")
FOR CUSPIDOR
(Optional)
1/8" YELLOW TUBE
FOR SYRINGE AIR
5/16" CLEAR TUBE
(w/ BLACK DASH)
TO FOOT CONTROL
1/4" CLEAR TUBE
FOR AIR QUICK
CONNECT (Optional)
© Midmark Corporation 2000 SF-1605 7/11
Page 5-17
Printed in U.S.A.
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
FLOW DIAGRAM
for the
SMALL JUNCTION BOX
(with Regulators)
003-1192-00 Rev A
1/4" CLEAR TUBE
DRIVE AIR OUT
1/8" ORANGE TUBE
COOLANT WATER
PILOT AIR
1/8" BLUE TUBE
COOLANT AND
UMBILICAL
SYRINGE WATER
WATER
OUT
IN
VACUUM
WASTE
1/4" YELLOW TUBE
ASST WATER
(OPTIONAL)
1/8" BROWN TUBE
CUSPIDOR
PILOT AIR
(OPTIONAL)
1/8" RED TUBE
PILOT AIR
MASTER VALVE
FOOT CONTROL INLET
(TUBE w/ RIB)
1/8" YELLOW TUBE
SYRINGE AIR
AIR
1/8" PURPLE TUBE
NON-CONTROLLED AIR
MASTER VALVE
WATER
1/4" BLUE TUBE / CUSPIDOR WATER
UNFILTERED AND UNREGULATED (OPTIONAL)
NOTICE: These tubing
connections are required
only if the unit installed is
so equipped.
© Midmark Corporation 2000 SF-1605 7/11
Page 5-18
Printed in U.S.A.
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
FLOW DIAGRAM
for the
SMALL JUNCTION BOX
(without Regulators)
003-1193-00 Rev A
1/4" CLEAR TUBE
DRIVE AIR OUT
1/8" ORANGE TUBE
COOLANT WATER
PILOT AIR
1/4" YELLOW TUBE
DRIVE AIR IN
UMBILICAL
WATER
OUT
IN
VACUUM
WASTE
POWER SUPPLY
CABLE
1/8" RED TUBE
PILOT AIR
POWER UMBILICAL
(SUPPLIED WITH J-BOX)
1/4" BLUE TUBE
WATER
3/8" BLACK TUBE
WATER SUPPLY
(SUPPLIED WITH
J-BOX)
AIR
3/8" BLACK TUBE
AIR SUPPLY
WATER
WATER SHUT OFF VALVE
NOTICE: These tubing
connections are required
only if the unit installed is
so equipped.
© Midmark Corporation 2000 SF-1605 7/11
Page 5-19
Printed in U.S.A.
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
UPPER ASSEMBLY
HVE
SYRINGE
SYRINGE
SALIVA
EJECTOR
SWIVEL
ASSEMBLY
VACUUM
NOTE:
Some newer units
will not have the
Swivel Assembly.
WATER QUICK CONNECT
AIR QUICK CONNECT
SYRINGE AIR FLOW CONTROL
SYRINGE WATER FLOW CONTROL
LOWER ASSEMBLY
Y
GY
BL
Y
SOLIDS
COLLECTOR
BL
OPTIONAL
ASSISTANT'S
INSTRUMENTATION
WATER FLOW
CONTROL
TO CHAIR BACK
CONNECTION FOR
HEATED SYRINGE
OPTION
FROM CHAIR
(CLASSIC ONLY)
CONNECTION FOR
ILLUMINATION OPTION
CONNECTION FOR
ASSISTANT'S SYRINGE
OPTION
CONNECTION FOR
LIGHT OPTION
CONNECTION FOR
UNIT MOUNTED
CHAIR CONTROL
(CLASSIC CHAIRS ONLY)
BL
TUBING FOR
OTHER OPTIONS
CL
W
GR
GR
WIRING FOR
OTHER OPTIONS
BL
TO UNIT HEAD
Y
ILLUMINATION
POWER PACK
OPTION
BL / W
W
OR PL
GR R
BR
Y
BL
Y
CL
BL
BL
CL
BL
R
OR PL
GY
A
GY
CL
BL
Y
BL
TO JUNCTION
BOX
TO OPTIONAL
LIGHT ARM
W
CL
ILLUMINATION
POWER PACK
OPTION
AC H1 H2 H3
SELF CONTAINED
WATER SYSTEM
Y
BL / W
BL
BL
OPTIONAL
ILLUMINATION POWER PACK
HOOK-UP DETAILS
BL
AF1001
Figure 5-16. Tubing Diagram - Typical Concept LR Unit
© Midmark Corporation 2000 SF-1605 3/06
Page 5-20
Printed in U.S.A.
© Midmark Corporation 2000 SF-1605 Rev.3/06
Page 5-21
R
1 2 3 4 5 6 7
BL GR
BK BR OR W
BK
BL/W
OR
BL
Y
V
LINES INDICATE WIRE IS BEING
SHOWN USED FOR AN
ACCESSORY ELSEWHERE)
UNIT MOUNTED CHAIR
CONTROL PANEL (FOR
OPTIONAL UNIT MOUNTED
CHAIR CONTROL)
WIRES FOR FIBER OPTICS
(TO HANDPIECE)
KA914100
BK - BLACK
BL - BLUE
BL/W - BLUE/WHITE
BR - BROWN
GY - GRAY
GR - GREEN
GR/Y - GREEN / YELLOW
OR - ORANGE
R - RED
V - VIOLET
W - WHITE
Y - YELLOW
NOTE COLOR CODES
VARY DUE TO
CONFIGURATIONS
Figure 5-17. Wiring Diagram - Typical Delivery Unit [Serial Numbers PJ1000 thru PJ2427 & PK1000 thru PK1086 (Asepsis 21 shown)]
UNIT MOUNTED CHAIR
CONTROL CABLE (FOR
OPTIONAL UNIT MOUNTED
CHAIR CONTROLS
W
GR
ACCESSORY
WIRING (FROM
CONSOLE)
ADDITIONAL WIRING USED
FOR ACCESSORIES (DASHED
R
BR
UNIT MOUNTED
CHAIR CONTROL
WIRING (FROM
CONSOLE)
1 2 3 4 5 6 7
LEGEND
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
© Midmark Corporation 2000 SF-1605 Rev.3/06
Page 5-21.1
R
1 2 3 4 5 6 7
BL GR
BK BR OR W
OR
BL
V
LINES INDICATE WIRE IS BEING
SHOWN USED FOR AN
ACCESSORY ELSEWHERE)
UNIT MOUNTED CHAIR
CONTROL PANEL (FOR
OPTIONAL UNIT MOUNTED
CHAIR CONTROL)
WIRES FOR FIBER OPTICS
(TO HANDPIECE)
KA914101
BK - BLACK
BL - BLUE
BL/W - BLUE/WHITE
BR - BROWN
GY - GRAY
GR - GREEN
GR/Y - GREEN / YELLOW
OR - ORANGE
R - RED
V - VIOLET
W - WHITE
Y - YELLOW
NOTE COLOR CODES
VARY DUE TO
CONFIGURATIONS
Figure 5-17.1. Wiring Diagram - Typical Delivery Unit [Serial Numbers PJ2428 & PK1086 thru present (Asepsis 21 shown)]
UNIT MOUNTED CHAIR
CONTROL CABLE (FOR
OPTIONAL UNIT MOUNTED
CHAIR CONTROLS
BK
BL/W
ADDITIONAL WIRING USED
FOR ACCESSORIES (DASHED
W
Y
ACCESSORY
WIRING (FROM
CONSOLE)
GR
GY
R
BR
GY
UNIT MOUNTED
CHAIR CONTROL
WIRING (FROM
CONSOLE)
1 2 3 4 5 6 7
LEGEND
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
NOTE: COLOR
CODES VARY DUE
TO CONFIGURATIONS
BK - BLACK
BL - BLUE
BL/W - BLUE/WHITE
BR - BROWN
GY - GRAY
GR - GREEN
GR/Y - GREEN / YELLOW
OR - ORANGE
R - RED
V - VIOLET
W - WHITE
Y - YELLOW
LEGEND
R
BK
Y
BL
V
OR
CLEAR
Page 5-22
WHITE
OR
GR
BL
Y
12
BL
BL
BK
R
W
BR
GR
OR
BK R
W
Y
R
GR
BK
GR
BR
1 2 3 4 5 6
BK
OR
BL
BL/W
CHAIR CONTROL CABLE
WIRING (TO UNIT
MOUNT - CHAIR BACK)
UNIT MOUNTED
CHAIR CONTROL
CABLE (TO CHAIR)
V
12
V
ACCESSORY)
(OPTIONAL
FIBER OPTICS
Y
BR
BK
BL
V
R
BL
BK
R
TERMINAL
DUPLEX OUTLET
W
BL GR
BK BR OR W
GR/Y
GR/Y
1 2 3 4 5 6 7 8 9
BL GR
BK BR OR W
OR
BL/W
W
DELIVERY HEAD WIRING
(TO DELIVERY HEAD)
Figure 5-18. Wiring Diagram - Typical Console (Used on Units with
Serial Numbers PL1000 thru PL1571
POWER CABLES WIRING
(FROM JUNCTION BOX)
POWER CABLE
MAIN UMBILICAL WIRE HARNESS
PLUGS
FOR ASSISTANT'S
HEATED
SYRINGE
(DASHED LINES INDICATE WIRE IS
BEING SHOWN USED FOR AN
ACCESSORY ELSEWHERE)
WIRING AVAILABLE FOR
ADDITIONAL ACCESSORIES
GR W
BR
GREEN
H1 H2 H3
A
© Midmark Corporation 2000 SF-1605 Rev.3/06
BL/W
LIGHT CABLE WIRING
(TO LIGHT POST)
UNIT MOUNTED
CHAIR CONTROL
CABLE (TO UNIT)
KA914000
240 VAC
120 VAC
LIGHT
NOTE:
YELLOW WIRE IS
NORMALLY CONNECTED TO
NEGATIVE TERMINAL OF H3.
THEN ALL HANDPIECE
NEUTRAL WIRES ARE
CONNECTED TO THE
YELLOW WIRE, INSTEAD OF
USING A SEPARATE WIRE
FOR EACH NEUTRAL LINE.
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
© Midmark Corporation 2000 SF-1605 Rev.3/06
NOTE: COLOR
CODES VARY DUE
TO CONFIGURATIONS
BK - BLACK
BL - BLUE
BL/W - BLUE / WHITE
BR - BROWN
GY - GRAY
GR - GREEN
GR/Y - GREEN / YELLOW
OR - ORANGE
R - RED
V - VIOLET
W - WHITE
Y - YELLOW
LEGEND
Page 5-22.1
CHAIR CONTROL CABLE
WIRING (TO UNIT
MOUNT - CHAIR BACK)
UNIT MOUNTED
CHAIR CONTROL
CABLE (TO CHAIR)
DELIVERY HEAD WIRING
(TO DELIVERY HEAD)
Figure 5-18.1 Wiring Diagram - Typical Console (Used on Units with
Serial Numbers PL1572 thru Present
POWER CABLES WIRING
(FROM JUNCTION BOX)
MAIN UMBILICAL WIRE HARNESS
PLUGS
FOR ASSISTANT'S
HEATED
SYRINGE
(DASHED LINES INDICATE WIRE
IS BEING SHOWN USED FOR AN
ACCESSORY ELSEWHERE)
WIRING AVAILABLE FOR
ADDITIONAL ACCESSORIES
FIBER OPTICS
(OPTIONAL
aCCESSORY)
LIGHT CABLE WIRING
(TO LIGHT POST)
LIGHT
UNIT MOUNTED
CHAIR CONTROL
CABLE (TO UNIT)
NOTE: YELLOW
WIRE IS NORMALLY
CONNECTED TO NEGATIVE
TERMINAL 0F H3.
THEN ALL HANDPIECE
NEUTRAL WIRES ARE
CONNECTED TO THE
YELLOW WIRE, INSTEAD OF
USING A SEPERATE WIRE
FOR EACH NEUTRAL LINE.
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
Page 5-23
JUNCTION BOX
AUXILiARY
POWER
CONSOLE
PLUG
GR/Y
GR/Y
GR/Y
W or BL
GR/Y
BK or BR
W or BL
BK or BR
BK or BR
INCOMING
POWER
SUPPLY
W or BL
W or BL
BK or BR
BK or BR
W or BL
W or BL
15 AMP TYPE
3AG 120 VAC
FUSES
BK or BR
COM
1.3
9.0
14.1
16.1
C1
C2
4
1
2
3
W
BR
R
OR
BK
1
BK or BR
POWER
ON/ OFF
SWITCH
5
4
2
BK or BR
6
W or BL
3
7
9
BL
BK or BR
10
12
W or BL
GR/Y
GR
OUTLET
9 VAC
BK or BR
BL
FUSE
SCALER
ELECTRIC
HANDPIECE
SWITCH HEATED
SYRINGE
BK or BR
FUSE
HEATED
SYRINGE
BK or BR
4
3
2
1
BK or BR
W or BL
R
W
BR
BL
R
BK
BL OR
W
BR
Y
R
BK
OR
BR
6
5
2
1
BK or BR
BR
B
BR
6
5
2
1
115 VAC
50/60 HZ
15 AMP
W or BL
BK or BR
APC CHASSIS
7
8
1
12
24 VAC POWER FOR
OTHER OPTIONS
7
8
1
12
24 VAC
RECEPTACLES
BR
POWER CABLES WIRING
(TO CONSOLE)
V
GR BL
9 8 7 6 5 4 3 2 1
9 8 7 6 5 4 3 2 1
R
R
R
HEATED SYRINGE OPTION
24
VAC
12.6
VAC
Figure 5-19. Wiring Diagram - APC Power Supply
GR
ACC
105
115
18.0
FIBER OPTICS OPTION
W or BL
BK or BR
125
LIGHT OPTION
W or BL
GR/Y
OUTLET
W or BL
BK or BR
W or BL
BK or BR
W or BL
BK or BR
W or BL
BK or BR
BK or BR
10
9
8
7
6
5
4
3
2
1
W or BL
GR/Y
BK or BR
© Midmark Corporation 2000 SF-1605 Rev.3/06
W or BL
BK or BR
W or BL
BK or BR
W or BL
BK or BR
W or BL
BK or BR
W or BL
BK or BR
TERMINAL
BLOCK
KA914301
NOTE: COLOR CODES
VARY DUE TO
CONFIGURATIONS
BK - BLACK
BL - BLUE
BL/W - BLUE/WHITE
BR - BROWN
GY - GRAY
GR - GREEN
GR/Y - GREEN / YELLOW
OR - ORANGE
R - RED
V - VIOLET
W - WHITE
Y - YELLOW
LEGEND
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
© Midmark Corporation 2000 SF-1605 Rev.3/06
SELF CONTAINED
WATER SYSTEM
Terminal
Wire Color
1 ..............Black
2 ..............Orange
3 ..............Red
4 ..............Not Used
5 ..............White
6 ..............Brown
CONNECTION FOR
LIGHT OPTION
Page 5-24
3
6
9
2
5
8
2
5
8
1
4
7
1
4
7
2
5
1
4
3
6
3
6
CONNECTION FOR
UNIT MOUNTED CHAIR
CONTROL
(CLASSIC CHAIRS
ONLY)
3
6
9
2
5
1
4
GR PL
ILLUMINATION
POWER PACK
OPTION
BL
BL
Y
BL/W
BL
ILLUMINATION
POWER PACK
OPTION
AC H1 H2 H3
3
6
9
2
5
8
1
4
7
BL
BL
BL
BL/W
Y
KA920300
TO JUNCTION
BOX
OPTIONAL
ILLUMINATION POWER PACK
HOOK-UP DETAILS
CL
W
Terminal
Wire Color
1 ..............Black
2 ..............Orange
3 ..............Red
4 ..............Yellow
5 ..............White
6 ..............Brown
7 ..............Blue
8 ..............Violet
9 ..............Green
Figure 5-20. Wiring Diagram - Typical Concept LR Unit
TO OPTIONAL
LIGHT ARM
Y
BL
TO CHAIR BACK
WIRING FOR
OTHER OPTIONS
FROM CHAIR
(CLASSIC ONLY)
Terminal
Wire Color
1 ..............Black
2 ..............Blue
3 ..............Brown
4 ..............Green
5 ..............Orange
6 ..............Red
7 ..............White
8 ..............Not Used
9 ..............Not Used
TO UNIT HEAD
CONNECTION FOR
ILLUMINATION OPTION
CONNECTION FOR
HEATED SYRINGE
OPTION
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
CONSOLE
HANDPIECE
ILLUMINATION
PRESSURE
SWITCH
DELIVERY HEAD ASSEMBLY
AIR GAGE
CHECK
VALVE
ELECTRICAL LEADS
GOING TO LAMP
SOCKET IN HANDPIECE
COOLANT
AIR
DRIVE
AIR
COOLANT
WATER
BLEED
TO ADDITIONAL
HANDPIECES
BLEED
KA912800
Figure 5-21. Typical Handpiece Illumination Setup
© Midmark Corporation 2000 SF-1605 Rev.3/06
Page 5-25
Printed in U.S.A.
JUNCTION BOX
ASSEMBLY
SCALER
WATER
FLOW
CONTROL
KINK
VALVE
DRIVE
AIR
BLEED
BLEED
TO ADDITIONAL
HANDPIECES
DRIVE AIR
FOOT PEDAL
VALVE
COOLANT
WATER
CONTROL
VALVE
BLEED
Page 5-26
AIR - 40 PSI
WIRES
SCALER
PRESSURE
SWITCH
SCALER
WATER
SOLENOID
SCALER
HANDPIECE
WATER FLUSH
VALVE
CHECK
VALVE
Figure 5-22. Typical Scaler System Setup
FACILITY
VACUUM
AIR - 80 PSI
FOOT CONTROL
BLEED
© Midmark Corporation 2000 SF-1605 Rev.3/06
BLEED
DELIVERY HEAD ASSEMBLY
KA912900
CONSOLE ASSEMBLY
WATER
QUICK
CONNECT
SOLIDS
COLLECTOR
HVE
SALI VA
EJECTOR
SYRINGE
ASSISTANT'S
CONSOLE
Return To Table Of Contents
SECTION V
SCHEMATICS AND DIAGRAMS
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
SECTION VI
PARTS LIST
6.1
Introduction
The Description column provides a physical description
of the component.
The illustrated parts list provides information for identifying and ordering the parts necessary to maintain the
unit in peak operating condition. Refer to paragraph 1.5
for parts ordering information.
6.2
Description of Columns
The Item column of the parts list gives a component its
own unique number. The same number is given to the
component in the parts illustration. This allows a part
number of a component to be found if the technician
can visually spot the part on the illustration. The technician simply finds the component in question on the illustration and notes the item number of that component.
Then, he finds that item number in the parts list. The
row corresponding to the item number gives the technician the part number, a description of the component,
and quantity of parts per subassembly. Also, if a part
number is known, the location of that component can be
determined by looking for the item number of the component on the illustration.
The Part No. column lists the MIDMARK part number
for that component.
The Qty. column lists the number of that particular component required for the subassembly. The letters “AR”
denote “as required” when quantities of a particular
component cannot be determined, such as: adhesive.
Bullets { • } in the Part No. column and the Description
column show the indenture level of a component. If a
component does not have a bullet, it is a main component of that illustration. If a component has a bullet, it is
a subcomponent of the next component listed higher in
the parts list than itself that does not have a bullet. Likewise, if a component has two bullets, it is a subcomponent of the next component listed higher in the parts list
than itself that has only one bullet.
6.3
Torque Specifications and Important
Assembly Notes
When specific assembly torque specifications, measurements, or procedures have been identified, by our
engineering department, as required to assure proper
function of the unit, those torque specifications measurements, and procedures will be noted on the parts
illustrations. Adherence to these requirements is essential.
(*) Loctite is a registered trademark of the Loctite Corporation
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605
Page 6-1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Pictorial Index
Asepsis 21 Console Unit
3
2
5
NOTE: Flex Arm
maybe Oval or Square
depending on your
Unit.
1
4
7
6
KA925100
Applies to units with UA, UC, PL, PJ & V serial number prefixes
Item
1
2
3
Part No.
Description
Page
Asepsis 21 Delivery Unit Assy. .........6-18
Square Air Lock Flex
Arm Assembly (shown).....................6-50
Oval Air Lock Flex Arm Assy (not shown)
Manual Lock Flex Arm Assembly
(not shown) ....................................6-51
Delivery Unit Arm Assembly .............6-52
Item
Part No.
4
5
6
7
Description
Page
Chair Mounted Console Assembly ... 6-30
Cuspidor Assembly .......................... 6-27
Foot Control Assembly ..................... 6-74
Lg. Junction Box Assy (shown) ........ 6-62
Sm. Junction Box Assy
(not shown) .................................... 6-63
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/04
Page 6-2
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Pictorial Index
Whip-style Console Unit
3
2
NOTE: Flex Arm
maybe Oval or Square
depending on your
Unit.
5
4
1
7
6
KA925200
Applies to units with UW, PL, PK & V serial number prefixes
Item
1
2
Part No.
Description
Page
Whip-style Delivery Unit Assembly ...6-19
Square Air Lock Flex
Arm Assembly (shown).....................6-50
Oval Air Lock Flex Arm Assy (not shown)
Manual Lock Flex Arm Assembly
(not shown) ....................................6-51
Item
Part No.
3
4
5
6
7
Description
Page
Delivery Unit Arm Assembly............. 6-52
Chair Mounted Console Assembly ... 6-30
Cuspidor Assembly .......................... 6-27
Foot Control Assembly ..................... 6-74
Lg. Junction Box Assy (shown) ........ 6-62
Sm. Junction Box Assy..................... 6-63
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/04
Page 6-3
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Pictorial Index
Asepsis 21 Concept LR Unit
2
NOTE: Flex Arm
maybe Oval or Square
depending on your
Unit.
1
3
7
4
8
5
6
KA925300
Applies to units with UA, UC, PJ & V serial number prefixes
Item
1
2
3
Part No.
Description
Page
Asepsis 21 Delivery Unit Assy ..........6-18
Square Air Lock Flex
Arm Assembly (shown).....................6-50
Oval Air Lock Flex Arm Assy (not shown)
Manual Lock Flex Arm Assembly
(not shown) ....................................6-51
LR Unit Arm Assembly......................6-55
Item
Part No.
4
5
6
7
8
Description
Page
Lg. Junction Box Assy (shown) ........ 6-62
Sm. Junction Box Assy .................... 6-63
LR Console Components ................. 6-56
Foot Control Assembly ..................... 6-74
LR Vac Pak Upper Components ...... 6-57
LR Vac Pak Lower Components....... 6-58
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/04
Page 6-4
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Pictorial Index
Whip-style Concept LR Unit
2
NOTE: Flex Arm
maybe Oval or Square
depending on your
Unit.
1
3
7
8
6
4
5
KA925500
Applies to units with UW, PK & V serial number prefixes
Item
1
2
3
Part No.
Description
Page
Whip-style Delivery Unit Assy...........6-34
Square Air Lock Flex
Arm Assembly (shown).....................6-50
Oval Air Lock Flex Arm Assy (not shown)
Manual Lock Flex Arm Assembly
(not shown) ....................................6-51
LR Unit Arm Assembly......................6-55
Item
Part No.
4
5
6
7
8
Description
Page
Lg. Junction Box Assy (shown) ........ 6-62
Sm. Junction Box Assy..................... 6-63
Foot Control Assembly ..................... 6-74
LR Console Components ................. 6-56
LR Vac Pak Upper Components ...... 6-57
LR Vac Pak Lower Components....... 6-58
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/04
Page 6-5
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Pictorial Index
Asepsis 21 SLC Unit
2
1
5
3
6
4
KA925400
Applies to units with UA, UC, PJ & V serial number prefixes
Item
1
2
3
Part No.
Description
Page
Asepsis 21 Delivery Unit Assy ..........6-18
Air Lock Flex Arm Assy (shown) .......6-50
Manual Lock Flex Arm Assembly .....6-51
SLC Unit Mounting Components ......6-53
Item
Part No.
4
5
6
Description
Page
Lg. Junction Box Assy (shown) ........ 6-62
Sm. Junction Box Assy..................... 6-63
Cuspidor Assembly .......................... 6-27
Foot Control Assembly ..................... 6-74
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/04
Page 6-6
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Pictorial Index
Whip-style SLC Unit
2
1
5
3
4
6
KA925000
Applies to units with UW, PK & V serial number prefixes
Item
1
2
3
Part No.
Description
Page
Whip-style Delivery Unit Assy...........6-19
Air Lock Flex Arm Assy (shown) .......6-50
Manual Lock Flex Arm Assembly......6-51
SLC Unit Mounting Components ......6-53
Item
Part No.
4
5
6
Description
Page
Lg. Junction Box Assy (shown) ........ 6-62
Sm. Junction Box Assy..................... 6-63
Cuspidor Assembly .......................... 6-27
Foot Control Assembly ..................... 6-74
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/04
Page 6-7
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Pictorial Index
Cart Assemblies
1
Asepsis 21 Duo Cart
2
1
Assistant’s Cart
8
2
2
3
2
Mobile Work Surface
3
8
Asepsis 21 Doctor’s Cart
ASSE
A
EPPS
SIIS
S
4
8
21
111
ASSE
A
EPPS
SIIS
S
21
111
5
9
Asepsis 21 Hygienist’s Cart
5
6
6
7
7
AF211000
Applies to units with UK, PM & V serial number prefixes
Item
1
2
3
4
Part No.
Description
Page
Tub Support Arm Assy (shown)........ 6-38
Instrument Tray Arm Assy ................ 6-37
Asepsis 21 Duo / Assistant’s
Top Components............................ 6-39
Asepsis 21 Duo / Assistant’s
Housing Components .................... 6-40
Mobile Work Surface Top
Components .................................. 6-41
Item
Part No.
5
6
7
8
9
Description
Page
Foot Control Assembly......................6-74
Cart Assembly Base Components....6-42
Sm. Junction Box Assy (shown)........6-63
Lg. Junction Box Assy.......................6-62
Asepsis 21 Delivery Unit Assy ..........6-18
Vacuum Instruments Mounting
Components ...................................6-75
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/04
Page 6-8
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Pictorial Index
Asepsis 21 Duo & Assistant’s
Wall/Cabinet Mounted Delivery Systems
2
1
3
10
AS
EP
SIS
21
111
9
8
4
5
7
6
KA925600
Applies to units with UA, UC, PJ, V serial number prefixes
Item
1
2
3
4
Part No.
Description
Qty
Inst.Tray Arm Assy (shown) ..............6-37
Tub Support Arm Assy .....................6-38
Asepsis 21 Duo / Assistant’s Top
Components ...................................6-39
Duo Unit Wall Mt. Components
(shown) ..........................................6-45
Duo Unit Cabinet Mt. Components ...6-46
Duo Arm Assembly (Adjustable).......6-43
Item
Part No.
5
6
7
8
9
10
Description
Qty
Duo Arm Pivot Joint Assembly ......... 6-44
Foot Control Assembly ..................... 6-74
Sm. Junction Box Assy (shown) ....... 6-63
Lg. Junction Box Assy ...................... 6-62
Fixed Arm Assembly ........................ 6-54
Asepsis 21 Duo / Assistant’s
Housing Components..................... 6-40
Asepsis 21 Delivery Unit Assy ......... 6-18
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/04
Page 6-9
Printed in U.S.A.
Return To Table Of Contents
Pictorial Index
Long/Short Arm Side Delivery Systems
2
SECTION VI
PARTS LIST
3
8
1
AS
EP
SIS
21
111
3
4
5
6
1
7
5
AS
EP
SIS
21
111
AF214000
Applies to units with UA, UC, PJ & V serial number prefixes
Item
1
2
3
4
5
6
7
Part No.
Description
Page
Asepsis 21 Delivery Unit
Components ...................................6-18
Manual Lock Flex Arm Assembly......6-51
Fixed Arm Assembly .........................6-54
Side Delivery Unit Wall Mount
Components ...................................6-47
Foot Control Assembly......................6-74
For manifolds, valves, etc. for cabinet
mounted units, refer to Lg/Sm
Junction Box Assembly
Sm. Junction Box Assy (shown)........6-63
Lg. Junction Box Assy.......................6-62
Air Lock Flex Arm Assembly .............6-50
Item
Part No.
8
Description
Page
Side Delivery Unit Cabinet
Mount Components ....................... 6-48
153232
Conversion Kits
Long Arm to Short Arm Conversion Kit
(includes short Fixed Arm only)
(sterling)
152957
152957-01
Long Arm to Short Arm Conversion Kit
(includes short Fixed & Flex Arms)
(sterling)
(pebble)
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-10
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Pictorial Index
Rear Delivery System
1
2
3
AF213900
Applies to units with UA, UC, PJ & V serial number prefixes
Item
1
2
Part No.
Description
Page
Rear Delivery Cabinet Mount
Components...................................6-49
Asepsis 21 Delivery Unit Assy ..........6-18
Item
Part No.
3
Description
Page
Vacuum Instruments Mounting
Components .................................. 6-75
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/04
Page 6-11
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Asepsis 21
Handpiece Tubing
3 Port
4 Port
Dim. "A"
4
Fitting - 117483
1
3
2
Uni-Clamp
117479
Gasket - 117660
Fitting - 109714
Check Valve
117698
Add-a-Handpiece Kit
(Includes kink valve & valves to add one
handpiece to an Asepsis 21 delivery unit.
152086-01...............w/o handpiece tubing
Description
Serial Number
Prefix
Tubing
Color
UA, UC, UK
sterling grey
PJ, PM
shadow grey
Adapter Assy Connection Nut
AF925900
Length
Assembly Number
Tubing
Lamp Module
(Dim. “A”)
(Includes items 1 thru 4,
and all valves, fittings &
tubing shown above)
(Item #1)
(Item #2)
(Item #3)
(Item #4)
3-Port, Straight
52.0 in.
(132.1 cm)
151737 (sterling)
151737-01 (shadow)
120205
057-0733-00
275270 (sterling)
S059-00119 (shadow)
none
3-Port, Straight
62.0 in.
(157.5 cm)
152169 (sterling)
152169-01 (shadow)
120205
057-0733-00
(must specify qty: 5 ft.)
275270 (sterling)
S059-00119 (shadow)
none
(must specify qty: 6 ft.)
3-Port, Coiled
-
151648 (sterling)
151648-01 (shadow)
120205
057-0733-00
120204 (sterling)
053-1170-00 (shadow)
none
4-Port, Straight
52.0 in.
(132.1 cm)
151736 (sterling)
002-1855-00 (shadow)
120203
057-0734-00
275269 (sterling)
S059-00118 (shadow)
none
(must specify qty: 5 ft.)
4-Port, Straight
62.0 in.
(157.5 cm)
152170 (sterling)
152170-01 (shadow)
120203
057-0734-00
275269 (sterling)
S059-00118 (shadow)
4-Port, Straight,
w/Lamp Module
52.0 in.
(132.1 cm)
152024 (sterling)
152024-01 (shadow)
-
-
152878 (sterling)
120721-01 (shadow)
4-Port, Straight,
w/Lamp Module
62.0 in.
(157.5 cm)
152171(sterling)
152171-01 (shadow)
-
-
152878 (sterling)
120721-01 (shadow)
none
(must specify qty: 6 ft.)
120722
(incl. items 1 & 2)
120722
(incl. items 1 & 2)
4-Port, Straight,
ISO-C
52.0 in.
(132.1 cm)
152026 (sterling)
152026-01 (shadow)
-
057-1198-00
120632 (sterling)
120632-01 (shadow)
none
(incl. item 1)
4-Port, Straight,
ISO-C
62.0 in.
(157.5 cm)
152178 (sterling)
152178-01 (shadow)
-
057-1198-00
120632 (sterling)
120632-01 (shadow)
none
4-Port, Coiled
-
151646 (sterling)
151646-01 (shadow)
120203
057-0734-00
120202 (sterling)
151646-01 (shadow)
none
4-Port, Coiled,
w/Lamp Module
-
152023 (sterling)
152023-01 (shadow)
-
-
120720 (sterling)
120720-01 (shadow)
120722
4-Port, Coiled,
ISO-C
-
152025 (sterling)
152025-01 (shadow)
-
057-1198-00
120633 (sterling)
120633-01 (shadow)
(incl. item 1)
(incl. items 1 & 2)
none
(incl. item 1)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 8/14
Page 6-12
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Whip Unit
Handpiece Tubing
NOTE: All tubing on this page is Sterling Grey
NOTE:
Older units have a sleeve [2.25 in. (5.7 cm) long] and an
internal rod instead of the external tubing support shown. The
assembly shown above replaces all international handpiece
tubing designs. However, when replacing handpiece tubing
on units with old style whip pivot (4a), the new style whip pivot
(4b) must be ordered in addition to the assembly number.
KA935701i
Applies to units w/serial number prefix “UW” built before 5-1-00
(Includes items 1 thru 3,
and all valves, fittings &
tubing shown above)
(Item #1)
(Item #2)
(Item #3)
Whip Pivot
(Item #4b)
Not Included with
assembly
4-Port
152051
057-0734-00
120203
none
057-0590-00
3-Port
152052
057-0733-00
120205
none
057-0590-00
4-Port, w/ Lamp Module
152021
-
-
120722
057-0590-00
4-Port, ISO-C
152022
057-1198-00
-
none
057-0590-00
Description
Assembly Number
Connection Nut Adapter Assy
Lamp Module
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/12
Page 6-13
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Whip Unit
Handpiece Tubing
3 PORT
4 PORT
1
2
3
FITTING - 117483
GASKET - 117660
FITTING - 109714
UNI-CLAMP
117479
CHECK VALVE
117698
Serial Number
Prefix
Tubing
Color
UW
sterling grey
PK
shadow grey
KA935800
Applies to units w/serial number prefix “UW” built after 5-1-00
and all units w/ serial number prefix “PK” & “V”
Description
Assembly Number
Connection Nut
Adapter Assy
Lamp Module
(Includes items 1 thru 3, and all valves,
fittings & tubing shown above)
(Item #1)
(Item #2)
(Item #3)
4-Port
152051 (sterling)
151914-01 (shadow)
057-0734-00
120203
none
3-Port
152052 (sterling)
151913-01 (shadow)
057-0733-00
120205
none
4-Port, w/ Lamp Module
152021 (sterling)
152021-01 (shadow)
-
-
120722
4-Port, ISO-C
152022 (sterling)
152022-01 (shadow)
057-1198-00
-
none
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/12
Page 6-13.1
Printed in U.S.A.
Asepsis 21
Syringe Tubing
Return To Table Of Contents
SECTION VI
PARTS LIST
2 - PORT
STRAIGHT
3 - PORT
COILED
NOTE:
The heated syringe tubing assemblies (not shown)
contain all wiring and connectors necessary to replace
heated syringe tubing.
Serial Number
Prefix
Tubing
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL, PM
shadow grey
EQUIPMENT ALERT
Heated syringe tubing is slightly
longer than standard handpiece tubing.
Do not attempt to shorten tubing. The entire length
of tubing is necessary for proper function of the heated
syringe. [Resistance measured across Molex connector must be 10+1 ohms @ 77° F (25° C)].
Applies to units w/serial number ?? to ??
KA929800i1
Part No.
275271
S059-00120
120249
053-1171-00
151866
151866-01
Description
Quantity
2-Port, Straight, Unheated
(sterling)......................................per ft.
(shadow) .....................................per ft.
2-Port, Coiled, Unheated
(sterling)............................................. 1
(shadow) ............................................ 1
3-Port, Coiled, Heated
(sterling)............................................. 1
(shadow) ............................................ 1
Part No.
151867
151867-01
153171
153171-01
Description
Quantity
For Units w/o Vac Pak:
3-Port, Straight, Heated
(sterling) ............................................ 1
(shadow) ............................................ 1
For Units w/Vac Pak:
3-Port, Straight, Heated
(sterling) ............................................ 1
(shadow) ............................................ 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 1/14
Page 6-14
Printed in U.S.A.
Whip Unit
Syringe Tubing
Return To Table Of Contents
SECTION VI
PARTS LIST
NOTE: All tubing on this
page is Sterling Grey
NOTE:
Older units have a sleeve [2.25 in. (5.7 cm) long] and an
internal rod instead of the external tubing support shown. The
assembly shown above replaces all international syringe tubing
designs. However, when replacing syringe tubing on units with
old style whip pivot (1a), the new style whip pivot (1b) must be
ordered in addition to the assembly number.
EQUIPMENT ALERT
Heated syringe tubing is slightly
longer than standard handpiece tubing.
Do not attempt to shorten tubing. The entire length
of tubing is necessary for proper function of the heated
syringe. [Resistance measured across Molex connector must be 10+1 ohms @ 77° f (25° C)].
KA936001i
Applies to units w/serial number prefix “UW” built before 5-1-00
Description
Assembly Number
Whip Pivot
(Item #1b)
Not Included with assembly
4-Port, Unheated (shown)
151941
057-0590-00
4-Port, Heated
151921
057-0590-00
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/01
Page 6-15
Printed in U.S.A.
Whip Unit
Syringe Tubing
Return To Table Of Contents
SECTION VI
PARTS LIST
3 PORT
4 PORT
EQUIPMENT ALERT
Heated syringe tubing is slightly
longer than standard handpiece tubing.
Do not attempt to shorten tubing. The entire length
of tubing is necessary for proper function of the heated
syringe. [Resistance measured across Molex connector must be 10+1 ohms @ 77° f (25° C)].
Serial Number
Prefix
Tubing
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL, PM
shadow grey
KA935900
Applies to units w/serial number prefix “UW” built after 5-1-00
and all units w/ serial number prefix “PK” & “V”
Part No.
Description
151941
151941-01
4-Port, Unheated
(sterling)............................................. 1
(shadow) ............................................ 1
Quantity
Part No.
Description
151921
151921-01
4-Port, Heated
(sterling) ............................................ 1
(shadow) ............................................ 1
Quantity
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/04
Page 6-15.1
Printed in U.S.A.
Internal Tubing
Return To Table Of Contents
SECTION VI
PARTS LIST
O.D. Tubing
I.D. Tubing
1/8" OD
Tubing
1
7
5
2
3/16" OD
Tubing
3
1/4" OD
Tubing
6
8
7/16" OD
Tubing
9
3/16" ID
Saliva Tubing
5/16" OD
Tubing
4
5/8" ID
Tubing
3/8" OD
Tubing
1/2" ID
Vacuum Tubing
10
ID Spiral
Tubing
See below for
dimension.
NOTE:
All tubing must be ordered by the foot. Therefore, the quantity ordered is the amount of feet of tubing needed. Example: ordering a
quantity of 2 would be ordering two feet of tubing.
AF211701i
Item
1
2
3
4
5
6
7
8
Part No.
Description
Qty
177523
177551
177529
Blue Tubing, 1/8” O.D. ......................... AR
Brown Tubing, 1/8” O.D. ...................... AR
Clear Tubing, 1/8” O.D. .......................AR
176016
177552
177532
177531
177528
275257
177530
177606
177483
177524
177533
275263
S059-00154
176037
S059-00155
275274
R4761
R4786
275253
105o PVC Tubing, 1/8” O.D. ................ AR
Green Tubing, 1/8” O.D. ...................... AR
Orange Tubing, 1/8” O.D. ....................AR
Red Tubing, 1/8” O.D. ......................... AR
Violet Tubing, 1/8” O.D. .......................AR
White Tubing, 1/8” O.D. .......................AR
Yellow Tubing, 1/8” O.D. ...................... AR
Clear Tubing, 3/16” O.D. ..................... AR
Black Tubing, 1/4” O.D. .......................AR
Blue Tubing, 1/4” O.D. ......................... AR
Clear Tubing, 1/4” O.D. .......................AR
Yellow Tubing, 1/4” O.D. ...................... AR
Grey Tubing,1/4” O.D........................AR
Black Tubing, 5/16” O.D. ..................... AR
Clear Tubing, 5/16" ............................. AR
Black Tubing, 3/8” O.D. .......................AR
Clear Tubing, 7/16” O.D. ..................... AR
Clear Tubing, 5/8” I.D. ......................... AR
Grey Tubing, Saliva Ejector, 3/16” I.D. AR
Item
Part No.
S059-00127
9
275254
S059-00128
10
275255
S059-00125
275375
S059-00126
275402
S059-00121
275328
S059-00123
275225
S059-00132
275336
S059-00122
11
SMSC-0031
Description
Qty
Shadow Grey Tubing, Saliva Ejector,
3/16 I.D. .............................................. AR
Grey Tubing, Vacuum,1/2” I.D ........... AR
Shadow Grey Tubing, Vacuum,
1/2” I.D................................................ AR
Grey Spiral Tubing, 1/2” I.D. ............... AR
Shadow Grey Spiral Tubing, 1/2” I.D. . AR
Grey Spiral Tubing, 5/8” I.D. ............... AR
Shadow Grey Spiral Tubing, 5/8” I.D. . AR
Grey Spiral Tubing, 3/4” I.D. ............... AR
Shadow Grey Spiral Tubing, 3/4” I.D. . AR
Grey Spiral Tubing, 1” I.D. .................. AR
Shadow Grey Spiral Tubing, 1” I.D. .... AR
Grey Spiral Tubing, 1-1/4” I.D. ............ AR
Shadow Grey Spiral Tubing,
1-1/4” I.D............................................. AR
Grey Spiral Tubing, 1-1/2” I.D. ............ AR
Shadow Grey Spiral Tubing,
1-1/2” I.D............................................. AR
P-80 Rubber Lubricating Emulsion
(Not Shown) ....................................... AR
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 11/05
Page 6-16
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Connectors & Fittings
1
2
6
12
18
8
7
13
5
4
3
9
15
14
11
10
16
17
19
22
20
21
23
25
26
27
24
29
30
31
28
32
33
KA916306i
Item
Part No.
Description
Qty
1
2
3
4
5
6
109714
117349
117481
117739
117482
117483
7
8
9
10
117477
122743
117478
122743
113295
11
120361-2
12
120910
13
14
15
16
118915
117351
117662
117479
Connector, #10-32 to 1/8” O.D. Tube ..AR
Connector, #10-32 to 1/4” O.D. Tube ..AR
Barb Fitting, 1/8” to 1/8” O.D Tube ......AR
Barb Fitting, 1/8” to 1/4” O.D. Tube .....AR
Barb Fitting, 1/4” to 1/4” O.D. Tube .....AR
Barb Fitting, 1/4” to 1/4” O.D. Tube
w/Female #10-32 Threads ..................AR
Barb Tee, 3-Way for 1/8” O.D. Tubes...AR
Barb Tee, 3-Way for 3/16” O.D. Tubes.AR
Barb Tee, 3-Way for 1/4” O.D. Tubes...AR
Tee, 3-Way for 3/16" x 1/4” O.D. TubesAR
Control Valve Fitting w/0.062” Orifice,
One Female & One Male w/#10-32
NF-2 Threads......................................AR
Tee, Two Female & One Male
w/#10-32 NF-2 Threads ......................AR
3-Way N.C. Valve, Inlet 1/4” O.D.
Tube - Outlet 1/4”O.D. Tube ................AR
Plug, For 1/8” O.D. Tube......................AR
Brass Plug, #10-32 Threads ...............AR
Brass Plug, 1/8-27 NPTF Pipe ............AR
Uni-Clamp, 1/8” O.D. Tube ..................AR
Item
Part No.
Description
Qty
17
18
117480
117352
19
20
P16629
121084
21
137909
22
23
24
25
26
27
28
29
30
31
32
33
117660
105547
111506
(N.L.A.)
(N.L.A.)
(N.L.A.)
117698
029-3643-00
029-2585-00
014-0526-00
014-0542-01
014-0553-00
Sleeve Clamp, 1/4” O.D. Tube............. AR
4-Way Tee, Three #10-32
Female Threads & One Male
1/8-27 NPT Thread............................. AR
Nipple connector, 1/8-27 NPT ............ AR
Male Connector, 1/4” O.D. Tube to
1/8”-27 MPT........................................ AR
Male Elbow, 3/8” O.D. Tube to
1/8-27 MPT......................................... AR
Gasket, Sealing .................................. AR
Waste Elbow....................................... AR
Adapter ............................................... AR
Quick Connect, 5/16" x 1/8" NPT ....... AR
Quick Connect, 5/16"OD Tube Union . AR
Quick Connect, 5/16" x 1/4" Reducer . AR
Check Valve, For 1/8” O.D. Tube......... AR
Manifold Assy. w/ Barbed Fitting......... AR
Manifold Assy...................................... AR
Barb Fitting, 5/32" x 3/16" .................. AR
Barb Fitting, 3/16" x 3/16"...................... 1
Barb Fitting, 3/16" x 1/8" NPT............. AR
(N.L.A. denotes “No Longer Available.”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev.9/07
Page 6-17
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Asepsis 21 Delivery Unit
Overview
4
2
3
AS
EP
SIS
21
1
111
5
DA2361i
Item
1
2
3
4
Part No.
Description
Page
“Asepsis 21 Delivery Unit
Cover Components”....................... 6-20
“Asepsis 21 Delivery Unit Pneumatic/
Hydraulic Components” ................. 6-22
Kink Valve Assembly ........................ 6-24
Internal Tubing.................................. 6-16
Item
Part No.
5
6
7
Description
Page
“Unit Mounted Chair Control” ...........6-76
“Asepsis 21 Syringe Tubing”
(not shown).....................................6-14
“Asepsis 21 Hndpc. Tubing”
(not shown).....................................6-12
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 10/09
Page 6-18
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Whip-style Delivery Unit
Overview
4
3
7
NOTE: Flex Arm
maybe Oval or Square
depending on your
Unit.
2
8
5
1
6
AF209000
Item
1
2
3
4
5
Part No.
Description
Page
“Whip Unit Cover Components”........ 6-21
Kink Valve Assembly ........................ 6-24
“Whip Assembly” .............................. 6-25
“Whip Unit Hdpc. Tubing” ................. 6-13
“Whip Unit Syringe Tubing”............... 6-15
“Whip Unit Pneumatic /Hydraulic
Components” ................................. 6-23
Item
Part No.
6
7
8
Description
Page
“Whip Unit Inst.Tray Assy”.................6-26
Square Air Lock Flex
Arm Assembly (shown) .....................6-50
Oval Air Lock Flex Arm Assy (not shown)
Manual Lock Flex Arm Assembly
(not shown)6-51
“Internal Tubing” ................................6-16
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/01
Page 6-19
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Asepsis 21 Delivery Unit Cover
Components 37
2
AS
EP
SIS
4
1
3
21
40
34
39
5
6
35
9
7
33
36
10
11
12
8
29
27
26
32
31
30
38
28
13
14
7
25
16
17
24
15
18
23
22
21
18
19
20
KA927000
Applies to units with “UA” & “UK” serial number prefixes
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Part No.
Description
152077
Cover Assembly (Includes items
2 thru 4) .............................................. 1
• Magnetic Latch Disc ........................... 3
• Cover .................................................. 1
• Name Plate ......................................... 1
Stud ....................................................... 3
Refer to “Kink Valve Assembly”) .........Ref
Magnet .................................................. 3
Rear Standoff ........................................ 1
Tray Mount Plug..................................... 1
Bearing Housing Assembly ................... 1
End Cap ................................................ 1
Screw .................................................... 2
Stop Block ............................................. 1
Support Arm Bottom Cover ................... 1
Screw .................................................... 2
Screw .................................................... 4
Instrument Head Support ...................... 1
Screw .................................................... 4
Handle (Right) ....................................... 1
Thumbscrew .......................................... 1
Plug Button (0.25 in.)............................. 1
• 120873-2
• 120856
• 120936
042-0093-07
120874
120931
120960-50
152048
120881-50
121604-50
120592
120880-50
C2822
P12577
120878-50
120199
120882-50
151779
120241
Qty
Item
Part No.
22
N.L.A.
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
• 121527
120233
120872
120883-50
120857
120887-50
040-0010-159
120877
117601
120885-50
120863
120236
P17928
120339
116599
110065
120912
152071
Description
Qty
Instrument Holder Bar Assembly
Units w/o Chair Remote (shown)
(Includes item 23)................................1
Units w/Chair Remote (not shown)
(Refer to “Unit Mtd. Chair Control”) . Ref
• Knight Logo - small...........................1
Screw .................................................... 4
Front Standoff ........................................2
Handle (Left) ..........................................1
Lower Cover...........................................1
Support Plate .........................................1
Screw .....................................................4
Rear Standoff.........................................1
Screw .....................................................2
Valve Mounting Plate .............................2
Inner Cover ..............................................
Plug Button (0.50 in. Dia).......................4
Screw .....................................................8
Non-Skid Pad .........................................1
Tray ........................................................1
Retaining Ring .......................................1
Screw ..................................................AR
Thumbscrew ..........................................1
N.L.A. Denotes “No Longer Available
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/26/14
Page 6-20
Printed in U.S.A.
Return To Table Of Contents
Asepsis 21 Delivery Unit Cover
Components 39
2
AS
EP
SIS
4
SECTION VI
PARTS LIST
1
3
6
21
42
36
7
12
8
37
11
9
35
38
5
41
13
14
10
31
29
28
33
34
40
30
15
32
16
9
27
19
26
17
20
25
24
NOTE: All painted/plastic
components on this page
are Pebble Grey
18
23
20
21
22
KA9270002i
Applies to units with serial numbers PJ1000 thru PJ1869 & PM1000 thru PM1163
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Part No.
Description
029-5957-00
Cover Assembly (Includes items
2 thru 4) .............................................. 1
• Magnetic Latch Disc ........................... 3
• Cover .................................................. 1
• Name Plate ......................................... 1
Vinyl Pouch............................................ 1
Flow Diagram ........................................ 1
Stud ....................................................... 3
Refer to “Kink Valve Assembly”) .........Ref
Magnet .................................................. 3
Rear Standoff ........................................ 1
Tray Mount Plug..................................... 1
Bearing Housing Assembly ................... 1
End Cap ................................................ 1
Screw .................................................... 2
Stop Block ............................................. 1
Support Arm Bottom Cover ................... 1
Screw .................................................... 2
Screw .................................................... 4
Instrument Head Support ...................... 1
Screw .................................................... 4
Handle (Right) ....................................... 1
Thumbscrew .......................................... 1
Plug Button (0.25 in.)............................. 1
• 120873-2
• 053-2496-00
• 061-0772-00
016-0882-00
003-1259-00
042-0093-07
120874
120931
120960-50
152048-01
120881-50
121604-50
120592
120880-50
C2822
P12577
120878-50
120199
120882-50
151779
120241-50
Qty
Item
Part No.
24
152103-01
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
• 121527
120233-50
120872
120883-50
120857-01
120887-50
040-0010-159
120877
117601
120885-50
120863-01
120236-50
P17928
120339
116599
110065
120912
152071
Description
Qty
Instrument Holder Bar Assembly
Units w/o Chair Remote (shown)
(Includes item 23)................................1
Units w/Chair Remote (not shown)
(Refer to “Unit Mtd Chair Control”) .. Ref
• Knight Logo - small.............................1
Screw .................................................... 4
Front Standoff ........................................2
Handle (Left) ..........................................1
Lower Cover...........................................1
Support Plate .........................................1
Screw .....................................................4
Rear Standoff.........................................1
Screw .....................................................2
Valve Mounting Plate .............................2
Inner Cover ..............................................
Plug Button (0.50 in. Dia).......................4
Screw .....................................................8
Non-Skid Pad .........................................1
Tray ........................................................1
Retaining Ring .......................................1
Screw ..................................................AR
Thumbscrew ..........................................1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/26/14
Page 6-20.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Asepsis 21 Delivery Unit Cover
Components
6
5
1
2
3
AS
EP
SIS
21
4
12
7
8
15
9
13
14
11
10
30
29
27
28
9
16
26
18 17
25
19
24 23
22
NOTE: All painted/plastic
components on this page
are Pebble Grey
19
20
21
DA107501i
Applies to units with serial numbers PJ1870 & PM1164 thru Present
Applies to units with serial numbers V2200 thru V810792
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Part No.
Description
029-5957-00
Cover Assembly (Includes items
2 thru 4) .............................................. 1
• Magnetic Latch Disc ........................... 3
• Cover .................................................. 1
• Name Plate ......................................... 1
Vinyl Pouch............................................ 1
Flow Diagram ........................................ 1
Stud ....................................................... 3
Refer to “Kink Valve Assembly”) .........Ref
Magnet .................................................. 3
Rear Standoff ........................................ 1
Tray Mount Plug..................................... 1
Bearing Housing Assembly ................... 1
End Cap ................................................ 1
Screw .................................................... 2
Bushing ................................................. 1
Support Arm Bottom Cover ................... 1
Screw .................................................... 4
Instrument Head Support ...................... 1
Screw .................................................... 4
Handle (Right) ....................................... 1
Thumbscrew .......................................... 1
Plug Button (0.25 in.)............................. 1
• 120873-2
• 053-2496-00
• 061-0772-00
016-0882-00
003-1259-00
042-0093-07
120874
120931
120960-50
057-0641-50
120881-50
121604-50
016-1569-14
120880-50
P12577
021-0060-50
120199
120882-50
151779
120241-50
Qty
Item
Part No.
23
152103-01
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
• 061-0771-00
120233-50
120872
120883-50
120857-01
120887-50
040-0010-159
120877
117601
120885-50
120863-01
120236-50
P17928
120339
116599
042-0056-04
040-0006-73
121428
Description
Qty
Instrument Holder Bar Assembly
Units w/o Chair Remote (shown)
(includes item 24) ................................1
Units w/Chair Remote (not shown)
(Refer to “Unit Mtd Chair Control”) .. Ref
• Knight Logo - small.............................1
Screw .................................................... 4
Front Standoff ........................................2
Handle (Left) ..........................................1
Lower Cover...........................................1
Support Plate .........................................1
Screw .....................................................4
Rear Standoff.........................................1
Screw .....................................................2
Valve Mounting Plate .............................2
Inner Cover ..............................................
Plug Button (0.50 in. Dia).......................4
Screw .....................................................8
Non-Skid Pad .........................................1
Tray ........................................................1
Retaining Ring .......................................1
Screw ..................................................AR
Set Screw...............................................1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/13/15
Page 6-20.2
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Asepsis 21 Delivery Unit Cover
Components
1
2
3
AS
EP
SIS
6
5
21
4
12
7
8
15
9
13
14
11
10
30
29
27
28
26
16
9
18 17
25
19
24 23
22
19
20
NOTE: All painted/plastic components on this
page are Pebble Grey
21
DA3466i
Applies to units with serial numbers V810793 thru V1411585
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Part No.
Description
029-5957-00
Cover Assembly (Includes items
2 thru 4) ...............................................1
• Magnetic Latch Disc ............................3
• Cover ...................................................1
• Name Plate..........................................1
Vinyl Pouch ............................................1
Flow Diagram .........................................1
Stud........................................................3
Refer to “Kink Valve Assembly”)......... Ref
Magnet ...................................................3
Rear Standoff .........................................1
Tray Mount Plug .....................................1
Bearing Housing Assembly ....................1
End Cap .................................................1
Screw .....................................................2
Bushing ..................................................1
Support Arm Bottom Cover....................1
Screw .....................................................4
Instrument Head Support.......................1
Screw .....................................................4
Handle (Right) ........................................1
Thumbscrew...........................................1
Plug Button (0.25 in.) .............................1
• 120873-2
• 053-2496-00
• 061-0772-00
016-0882-00
003-1259-00
042-0093-07
120874
120931
120960-50
057-0641-50
120881-50
121604-50
016-1569-14
120880-50
P12577
021-0060-50
120199
120882-50
151779
120241-50
Qty
Item
Part No.
23
152103-01
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
• 061-0771-00
120233-50
120872
120883-50
120857-01
120887-50
040-0010-159
120877
117601
120885-50
120863-01
120236-50
P17928
120339
116599
042-0056-04
040-0006-73
121428
Description
Qty
Instrument Holder Bar Assembly
Units w/o Chair Remote (shown)
(includes item 24)................................ 1
.......... Units w/Chair Remote (not shown)
..... (Refer to “Unit Mtd Chair Control”)Ref
• Knight Logo - small ............................ 1
Screw.................................................... 4
Front Standoff ........................................ 2
Handle (Left).......................................... 1
Lower Cover .......................................... 1
Support Plate......................................... 1
Screw..................................................... 4
Rear Standoff ........................................ 1
Screw..................................................... 2
Valve Mounting Plate ............................. 2
Inner Cover ..............................................
Plug Button (0.50 in. Dia) ...................... 4
Screw..................................................... 8
Non-Skid Pad......................................... 1
Tray ........................................................ 1
Retaining Ring ....................................... 1
Screw.................................................. AR
Set Screw .............................................. 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/13/15
Page 6-20.3
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Asepsis 21 Delivery Unit Cover
Components
1
2
3
AS
EP
SIS
21
4
11
8
7
6
5
14
12
13
10
22
9
29 30
28
27
9
15
26
18
25
23
7
21
24
17 16
18
NOTE: All painted/plastic
components on this
page are Pebble Grey
19
20
i
Applies to units with serial numbers V1411586 thru Present
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Part No.
Description
029-5957-00
• 120873-2
• 053-2496-00
• 061-0772-00
042-003-07
Cover Assembly (Incl. Items 2 - 4).........1
• Magnetic Latch Disc ............................3
• Cover ...................................................1
• Name Plate..........................................1
Stud........................................................2
(Refer to “Kink Valve Assembly”) ....... Ref
Magnet ...................................................3
Screw (#10-32 x 5/8” Hex Button)..........1
Lock Washer ..........................................4
Tray Mount Plug .....................................1
Bearing Housing Assembly ....................1
End Cap .................................................1
Screw .....................................................2
Bushing ..................................................1
Support Arm Bottom Cover....................1
Screw .....................................................4
Instrument Head Support.......................1
Screw .....................................................4
Handle (Right) ........................................1
Screw (1/2” Pan Head Phillips) ..............1
Plug Button (0.25 in.) .............................1
Screw (3/8” Pan Head Phillips) ..............2
120874
P17928-2
P14718
120960-50
057-0641-50
120881-50
121604-50
016-1569-14
120880-50
P12577
021-0060-50
120199
120882-50
040-0010-144
120241-50
040-0010-109
Qty
Item
Part No.
23
152103-01
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
061-0771-00
040-0010-74
053-2498-00
120883-50
120857-01
120887-50
040-0010-159
053-2497-00
117601
120885-50
053-2489-00
120236-50
121337-2
120339
116599
042-0056-04
040-0006-73
121428
040-0010-179
Description
Qty
Instrument Holder Bar Assembly
Units w/o Chair Remote ..................... 1
Units w/Chair Remote (not shown)
(Refer to “Unit Mtd Chair Control”) Ref
Knight Logo - small................................ 1
Screw.................................................... 4
Front Standoff ........................................ 2
Handle (Left).......................................... 1
Lower Cover .......................................... 1
Support Plate......................................... 1
Screw..................................................... 4
Rear Standoff ........................................ 1
Screw..................................................... 2
Valve Mounting Plate ............................. 2
Inner Cover ..............................................
Plug Button (0.50 in. Dia) ...................... 4
Screw..................................................... 8
Non-Skid Pad......................................... 1
Tray ........................................................ 1
Retaining Ring ....................................... 1
Screw.................................................. AR
Set Screw .............................................. 1
Screw (Pan Head) ................................. 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/13/15
Page 6-20.4
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Whip Unit Cover Components
30
7
1
24
23
19
22
22
26
27
25
2
3
4
7
21
28
29
20
5
18
27
6
36
8
9
7
35
10
11
A
12
17
Serial Number
Prefix
Color
UW
sterling grey
PK
pebble grey
16
13
A
14
15
AF209302i
Applies to all units w/serial numbers prefix “UW”
and units w/serial numbers PK1000 thru PK1041
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Part No.
Description
Qty
(N.L.A.)
122152-01
122163-01
P1829Nut
120716-2
122145-2
122146-2
(N.L.A.)
029-4709-00
122168-50
(N.L.A.)
122154-01
122164-01
119905
(N.L.A.)
152048-01
(N.L.A.)
117363A-50
(N.L.A.)
121604-50
(N.L.A.)
120582-01
(N.L.A.)
120754-50
P12577
(N.L.A.)
120553-50
(N.L.A.)
120583-01
Top Cover (sterling) .............................. 1
Top Cover (pebble)................................ 1
Top Cover 6 Position (pebble) ............... 1
6
Screw..................................................... 4
Rear Spacer........................................... 2
Front Spacer........................................ 2
Chassis Plate (sterling) ........................ 1
Chassis Plate (pebble).......................... 1
Chassis Plate 6 Position (pebble) ......... 1
Bottom Cover (sterling) ........................ 1
Bottom Cover (pebble) .......................... 1
Bottom Cover 6 Position (pebble) ......... 1
Screw..................................................... 9
Bearing Housing Assy (sterling) ........... 1
Bearing Housing Assy (pebble) ............ 1
Support Arm End Cap (sterling) ........... 1
Support Arm End Cap (pebble) ............ 1
Screw (sterling) .................................... 2
Screw (pebble) ...................................... 2
Cover - Long (sterling).......................... 1
Cover - Long (pebble) ........................... 1
Separator Bracket (sterling).................. 1
Separator Bracket (pebble) ................... 1
Screw..................................................... 4
Instrument Head Support (sterling) ...... 1
Instrument Head Support (pebble) ....... 1
Cover - Short (sterling) ......................... 1
Cover - Short (pebble) .......................... 1
Item
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
Part No.
Description
Qty
(N.L.A.)
122150-50
(N.L.A.)
122151-50
121413
102154
152838
Handle - Right (sterling) ....................... 1
Handle - Right (pebble) ........................ 1
Handle - Left (sterling) ......................... 1
Handle - Left (pebble)........................... 1
Decal ..................................................... 1
Screw .................................................... 1
Spring Block Assembly (Syringe)
(includes items 20 thru 24) ................. 1
• 122131-2
• Spring Retainer Block ......................... 1
• 121656
• Cable Clamp ....................................... 1
• 040-0010-159 • Screw.................................................. 4
• 025-0096-00 • Spring ................................................. 1
• 120959
• Screw.................................................. 1
109191
Cord Clip ............................................... 1
120591-2
Syringe Block ........................................ 1
152105
Thumb Screw ........................................ 6
120623
Flow Adjust Fitting ................................. 4
120624
Flow Adjust Pad .................................... 4
(N.L.A.)
Instrument Pad (sterling)...................... 1
120548-01
4 Position Instrument Pad (pebble) ...... 1
053-1314-00
6 Position Instrument Pad (pebble) ...... 1
120593
Pad Holder Pin ...................................... 2
P11777
Washer .................................................. 2
(N.L.A.)
Hole Plug (sterling) .............................. 1
120236-50
Hole Plug (pebble)................................ 1
(N.L.A.)
Screw (sterling) .................................... 4
120233-50
Screw (pebble) ..................................... 4
121656
Cable Clamp.......................................... 1
040-0010-109
Screw .................................................... 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 3/11/13
Page 6-21
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Whip Cover Components
19
1
29
28
2
27
24
27
3
4
5
6
26
7
8
25
9
6
35
2
12
10
14
13
11
NOTE: All painted/plastic
components on this page
are Pebble Grey
15
19
A
23
16
22
21
19
17
18
A
20
DA107602i
Applies to units w/serial numbers PK1042 thru Present
Applies to units with serial numbers PJ1870 & PM1164 thru Present
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Part No.
Description
Qty
122152-01
122163-01
152105
P1829
120716-2
122145-2
122146-2
119905
120623
120624
029-4709-00
122168-50
122154-01
122164-01
016-1569-14
057-0641-50
117363A-50
121604-50
120582-01
120754-50
P12577
021-0046-50
Top Cover .............................................. 1
Top Cover 6 Position.............................. 1
Thumb Screw ........................................ 6
Nut ......................................................... 4
Screw..................................................... 4
Rear Spacer .......................................... 2
Front Spacer2
Screw................................................... 11
Flow Adjust Fitting ................................. 4
Flow Adjust Pad..................................... 4
Chassis Plate (Modified)1...................... 1
Chassis Plate 6 Position ........................ 1
Bottom Cover......................................... 1
Bottom Cover 6 Position1 ........................
Bearing .................................................. 1
Bearing Housing Assembly ................... 1
Support Arm End Cap ........................... 1
Screw..................................................... 2
Cover - Long.......................................... 1
Separator Bracket.................................. 1
Screw..................................................... 4
Instrument Head Support ...................... 1
Item
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Part No.
Description
Qty
105480
120583-01
122150-50
122151-50
120233-50
120239
152838
Screw .....................................................4
Cover - Short..........................................1
Handle - Right ........................................1
Handle - Left ..........................................1
Screw .....................................................4
Hole Plug ...............................................1
Spring Block Assembly (Syringe)
(includes items 26 thru 30)...................1
• 122131-2
• Spring Retainer Block..........................1
• 121656
• Cable Clamp........................................1
• 040-0010-159 • Screw...................................................4
• 025-0096-00 • Spring ..................................................1
• 120959
• Screw...................................................1
118167
Cord Clip ................................................1
120591-2
Syringe Block .........................................1
P11777
Washer...................................................2
120593
Pad Holder Pin .......................................2
120548-01
4 Position Instrument Pad .....................1
053-1314-00
6 Position Instrument Pad .....................1
121428
Set Screw...............................................1
121656
Cable Clamp ..........................................1
040-0010-109
Screw .....................................................1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/13/15
Page 6-21.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Asepsis 21 Delivery Unit
Pneumatic/Hydraulic
Components
1
NOTE: All painted/plastic
components on this page
are Sterling Grey
2
27
25
30
6
5
4
29
3
28
28
30
26
10
30
11
28
12
22
7
13
24
9
14
23
NOTE:
15
152705 - Asepsis 21 Handpiece Kit
contains the kink valve, holder assembly,
fittings and tubing needed to add one
additional handpiece to the delivery unit.
8
21
19
20
16
17
18
KA927104i
Applies to units w/serial number prefixes “UA” & “UK” built before 3-15-00
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Part No.
Description
152105
120875-50
120178
029-2449-01
Thumb Screw ........................................ 3
Water Control Valve Knob ..................... 3
Set Screw (not shown) .......................... 3
Needle Valve Assembly
(Includes hardware) ............................ 3
Flow Adjustment Fitting ......................... 3
Flow Adjustment Pad ............................ 3
Clamp .................................................... 4
Refer to “Kink Valve Assembly”).........Ref
Toggle Switch ........................................ 2
Air/Oil Separator (Includes items
10 thru 18) ............................................
• Screw .................................................. 1
• Washer................................................ 1
• Lockwasher......................................... 1
• Fitting .................................................. 3
• Cap ..................................................... 1
• Manifold .............................................. 1
• Diffuser................................................ 1
• Gauze Sponge .................................... 7
• Bottle................................................... 1
120623
120624
118167
117357
152070
•
•
•
•
•
•
•
•
•
117601
P12572
P12575
117349
120934-6
120932
120933
121547
053-2353-00
Qty
Item
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
Part No.
Description
121650
115561
120388
118940
002-0684-01
002-0684-02
002-1833-00
122582
120199
109714
113295
117660
P12575
P507
P12572
041-0040-00
053-0110-15
045-0001-49
120899-50
122841
Set Screw...............................................1
Manual Push Button...............................1
Trim Nut .................................................1
Control Valve (Includes hardware).........1
Syringe Holder Assembly.......................1
Handpiece Holder Assembly..................3
C.W. Control Valve Assembly ................1
Clamp.....................................................1
Screw .....................................................1
Fitting .....................................................3
Control Valve Fitting ...............................1
Gasket....................................................1
Washer...................................................1
Nut .........................................................2
Washer...................................................2
Locknut ..................................................1
Spacer....................................................1
Washer...................................................1
Pressure Gauge Bracket........................1
Pressure Gauge.....................................1
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev.1/30/19
Page 6-22
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Asepsis 21 Delivery Unit
Pneumatic/Hydraulic
Components
1
2
NOTE: All painted/plastic
components on this page
are Sterling Grey
6
5
4
24
3
25
23
26
10
24
27
28
11
12
30
22
7
25
13
14
29
9
15
NOTE:
152705 - Asepsis 21 Handpiece Kit
contains the kink valve, holder assembly,
fittings and tubing needed to add one
additional handpiece to the delivery unit.
21
27
8
19
20
28
16
17
18
KA931404i
Applies to units w/serial number prefixes “UA” & “UK” built after 3-15-00
and units prior to UA26730671
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Part No.
Description
152105
120875-50
120178
029-2449-01
Thumb Screw ........................................ 3
Water Control Valve Knob ..................... 3
Set Screw (not shown) .......................... 3
Needle Valve Assembly
(Includes hardware) ............................ 3
Flow Adjustment Fitting ......................... 3
Flow Adjustment Pad ............................ 3
Clamp .................................................... 4
Refer to “Kink Valve Assembly”).........Ref
Toggle Switch ........................................ 2
Air/Oil Separator (Includes items
10 thru 18) ............................................
• Screw .................................................. 1
• Washer................................................ 1
• Lockwasher......................................... 1
• Fitting .................................................. 3
• Cap ..................................................... 1
• Manifold .............................................. 1
• Diffuser................................................ 1
• Gauze Sponge .................................... 7
• Bottle................................................... 1
Set Screw .............................................. 1
Manual Push Button .............................. 1
Trim Nut................................................. 1
Control Valve (Includes hardware) ........ 1
Syringe Holder Assembly
(Includes items 24 thru 28) ................. 1
120623
120624
118167
117357
152070
• 117601
• P12572
• P12575
• 117349
• 120934-6
• 120932
• 120933
• 121547
• 053-2353-00
121650
115561
120388
118940
002-0684-01
Qty
Item
Part No.
Description
24
25
• 053-1274-00
• 120908
26
27
28
29
• 053-1275-01
• 120913
• 042-0168-03
002-0684-02
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
• 120910
• 057-0536-00
• 053-1077-00
• P11836
• 053-1275-00
002-1833-00
122582
120199
109714
113295
117660
P12575
P507
P12572
041-0040-00
053-0110-15
045-0001-49
120899-50
122841
• Top Housing ........................................1
• Instrument Holder Pad
(Apply adhesive p/n 064-0026-00) ......2
• Bottom Housing ...................................1
• Set Screw ............................................2
• Screw ..................................................4
Handpiece Holder Assembly (Includes
items 24, 25, 27, 28, & 30 thru 34) .....3
• 3-way Valve .........................................1
• Pivot Pin ..............................................1
• Lever ...................................................1
• Set Screw ............................................1
• Bottom Housing ...................................1
C.W. Control Valve Assembly ................1
Clamp.....................................................1
Screw .....................................................1
Fitting .....................................................3
Control Valve Fitting ...............................1
Gasket....................................................1
Washer...................................................1
Nut .........................................................2
Washer...................................................2
Locknut ..................................................1
Spacer....................................................1
Washer...................................................1
Pressure Gauge Bracket........................1
Pressure Gauge ....................................1
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev.1/30/19
Page 6-22.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Asepsis 21 Delivery Unit
Pneumatic/Hydraulic
Components
1
2
6
5
4
24
3
25
23
26
10
24
27
28
Serial Number
Prefix
Color
UA
sterling grey
PJ, PM
pebble grey
11
12
30
22
7
25
13
14
29
NOTE:
9
15
152705 - Asepsis 21 Handpiece Kit
contains the kink valve, holder assembly,
fittings and tubing needed to add one
additional handpiece to the delivery unit.
21
27
8
19
20
28
16
17
18
KA931404i
Applies to units with serial numbers UA26730672 thru Present &
all units with serial nmber prefixes “PJ”, “PM” & “V”
Item
1
2
Part No.
Description
152105
(N.L.A.)
120875-50
120178
029-2449-01
120623
120624
118167
Thumb Screw ........................................ 3
Valve Knob (sterling) ............................ 3
Valve Knob (pebble) ............................. 3
Set Screw (not shown) .......................... 3
Needle Valve Assy (incl. hardware)....... 3
Flow Adjustment Fitting ......................... 3
Flow Adjustment Pad ............................ 3
Clamp ......................................................
Refer to “Kink Valve Assembly”).........Ref
Toggle Switch ........................................ 2
Air/Oil Separator (includes10 thru 18) ... 1
• Screw .................................................. 1
• Washer................................................ 1
• Lockwasher......................................... 1
• Fitting .................................................. 3
• Cap ..................................................... 1
• Manifold .............................................. 1
• Diffuser................................................ 1
• Gauze Sponge .................................... 7
• Bottle................................................... 1
Set Screw .............................................. 1
Manual Push Button .............................. 1
Trim Nut................................................. 1
Control Valve (includes hardware)......... 1
Syringe Holder Assembly
(includes items 24 thru 28) .................... 1
• Top Housing ....................................... 1
• Instrument Holder Pad
(apply ahdhesive # 064-0026-00) ....... 2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
117357
152070
• 117601
• P12572
• P12575
• 117349
• 120934-6
• 120932
• 120933
• 121547
• 053-2353-00
121650
115561
120388
118940
002-0684-01
24
25
• 053-1274-00
• 120908
Qty
Item
Part No.
Description
24
25
• 053-1274-00
• 120908
26
27
28
29
• 053-1275-01
• 120913
• 042-0168-03
002-0684-02
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
• 120910
• 057-0536-00
• 053-1077-00
• P11836
• 053-1275-00
002-1833-00
122582
120199
109714
113295
117660
P12575
P507
P12572
041-0040-00
053-0110-15
045-0001-49
(N.L.A.)
120899-50
122841
• Top Housing .......................................1
• Instrument Holder Pad
(apply ahdhesive #064-0026-00).........2
• Bottom Housing (w/o slot) ...................1
• Set Screw ............................................2
• Screw ..................................................4
Handpiece Holder Assembly (Includes
items 24, 25, 27, 28, & 30 thru 34) .....3
• 3-way Valve .........................................1
• Pivot Pin ..............................................1
• Lever ...................................................1
• Set Screw ............................................1
• Bottom Housing (w/slot) ......................1
C.W. Control Valve Assembly ................1
Clamp.....................................................1
Screw .....................................................1
Fitting .....................................................3
Control Valve Fitting ...............................1
Gasket....................................................1
Washer...................................................1
Nut .........................................................2
Washer...................................................2
Locknut ..................................................1
Spacer....................................................1
Washer...................................................1
Pressure Gauge Bracket (sterling) .......1
Pressure Gauge Bracket (pebble).........1
Pressure Gauge (includes screws) ........1
48
Qty
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 1/30/19
Page 6-22.2
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Whip Unit Pneumatic/Hydraulic
Components
Serial Number
Prefix
Color
UW
sterling grey
PK
pebble grey
1
2
30
5
29
28
4
6
26
7
27
3
8
26
9
23
22
10
14
24
1
19
2
20
11
13
16
14
18
17
12
15
21
KA982002i
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Part No.
Description
120169
029-2449-03
152070
Toggle Valve (Includes hardware) ..........1
Needle Valve (Includes hardware) .........3
Air/Oil Separator Assembly
(Includes items 6 thru 14)....................1
• Screw ..................................................1
• Washer ................................................1
• Washer ................................................1
• Fitting...................................................3
• Cap......................................................1
• Manifold ...............................................1
• Diffuser ................................................1
• Gauze Sponges...................................7
• Bottle ...................................................1
Screw .....................................................6
Toggle Switch (Includes hardware) ........1
Arm Lock Label ......................................1
Washer...................................................1
Plug Button (sterling grey) ...................1
Plug Button (pebble grey).....................1
CE Label ................................................1
Trim Nut..................................................1
Push Button ...........................................1
Set Screw...............................................1
• 117601
• P12572
• P12575
• 117349
• 120934-6
• 120932
• 120933
• 121547
• 053-2353-00
P17928-2
117357
Tpw1538
C2563
(N.L.A.)
120236-50
061-0782-00
120388
115561
121650
Qty
Item
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
Part No.
Description
(N.L.A.)
120170-50
120178
120612
P11777
117489
061-0804-00
118940
(N.L.A.)
120241-50
117235
P12575
109714
111102
Tp1126
061-0733-00
118167
002-1833-00
121337-2
122582
Knob (sterling grey) ............................. 3
Knob (pebble grey)............................... 3
Set Screw .............................................. 3
Screw..................................................... 2
Washer .................................................. 2
Indicator (Includes hardware) ................ 1
Whip Unit Decal..................................... 1
Control Valve ......................................... 1
Plug Button (sterling grey) ................... 1
Plug Button (pebble grey) .................... 1
Pressure Gauge .................................... 1
Washer .................................................. 1
Fitting..................................................... 1
Nut ......................................................... 2
Whip Label ............................................ 1
CE Label................................................ 1
Clip ....................................................... 1
Coolant Water Control Valve ................. 1
Screw..................................................... 1
Clamp .................................................... 1
Refer to “Kink Valve Assembly”) .........Ref
Refer to “Whip Unit Cover
Components” ...................................Ref
Qty
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 5/14
Page 6-23
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Kink Valve Assembly
DA111100i
Item
Part No.
Description
Qty
002-10384-00
Kink Valve Assembly......................... AR
[Component parts not available]
Item
Part No.
Description
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 10/11/18
Page 6-24
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Whip Assembly
HOLE
24a
NO HOLE
24b
1
22
21
23
24
27
2
27
3
20
4
15
14
5
25
14
27
13
19
26
12
8
18
9
17
16
6
10
11
7
KA936102i
Applies to units w/serial number prefix “UW” built before 5-1-00
Item
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
122161
120611
120569
120608
122129
152831
•
•
•
•
•
•
•
•
•
122177
122175-2
122142-2
117660
P1829
122176-2
120959
P11836
122080
Description
Qty
Refer to “Whip Unit Hndpc. Tubing”) .. Ref
Refer to “Whip Unit Syringe Tubing”) . Ref
Set Screw...............................................4
Shoulder Screw......................................4
Hub Pivot Pin .........................................4
Stop Pin .................................................4
Spring Hub Pin .......................................4
Actuator Assembly
(Includes items 9 thru 21) ....................3
• Wire Actuator.......................................1
• Actuator Pivot Block.............................1
• Pivot Pin ..............................................1
• Washer ................................................2
• Nut .......................................................1
• Stop Pin ...............................................1
• Screw...................................................2
• Set Screw ............................................4
• Pin .......................................................1
Item
Part No.
Description
17
18
19
20
•
•
•
•
•
•
•
•
21
22
23
24a
122127
122161
120551
24b
25
26
27
057-0590-00
122162
121363
042-0024-00
117479
120910
122174-2
025-0096-00
122509
Qty
Uni-clamp ............................................ 2
Pilot Valve ........................................... 1
Spacer Block ....................................... 1
Extension Spring (standard) ............... 1
Extension Spring
(max. tension - optional) ................... 1
Hub Pivot Block ..................................... 4
Set Screw .............................................. 8
Whip Hub ............................................... 4
Obsolete- replace with item # 24b.
When replacing old style whip
pivot (24a), handpiece/syringe tubing
assembly (1) for that position must be
replaced.
Whip Pivot.............................................. 4
Set Screw .............................................. 4
Stop Pin ................................................. 4
Loctite*................................................ AR
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 1/13
Page 6-25
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Whip Assembly
1
22
21
23
27
24
2
27
3
20
4
15
14
14
26
5
25
27
13
12
19
28
8
18
9
17
16
6
10
11
7
KA936200i
Applies to units w/serial number prefix “UW” built after 5-1-00
and all units w/serial number prefix “PK” & “V”
Item
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
122161
120611
120569
120608
122129
152831
•
•
•
•
•
•
•
•
122177
122175-2
122142-2
117660
P1829
122176-2
120959
P11836
Description
Qty
Refer to “Whip Unit Hndpc. Tubing” ...Ref
Refer to “Whip Unit Syringe Tubing ....Ref
Set Screw .............................................. 4
Shoulder Screw ..................................... 4
Hub Pivot Pin......................................... 4
Stop Pin................................................. 4
Spring Hub Pin ...................................... 4
Actuator Assy
(includes items 8 thru 20) ................... 3
• Wire Actuator ...................................... 1
• Actuator Pivot Block............................ 1
• Pivot Pin.............................................. 1
• Washer................................................ 2
• Nut ...................................................... 1
• Stop Pin .............................................. 1
• Screw .................................................. 2
• Set Screw ........................................... 4
Item
Part No.
Description
16
17
18
19
20
•
•
•
•
•
•
•
•
•
•
21
22
23
24
25
26
27
28
122127
122161
120551
057-0590-00
122162
121363
042-0024-00
002-0978-00
122080
117479
120910
122174-2
025-0096-00
122509
Qty
Pin ....................................................... 1
Uni-clamp ............................................ 2
Pilot Valve............................................ 1
Spacer Block ....................................... 1
Extension Spring (standard)................ 1
Extension Spring
(max. tension - optional) ................... 1
Hub Pivot Block...................................... 4
Set Screw...............................................8
Whip Hub ...............................................4
Whip Pivot.............................................. 4
Set Screw...............................................4
Stop Pin ................................................. 4
Loctite* ................................................ AR
Kit, Whip Arm Components Upgrade
(Includes qty.1 of items 4, 5, 6, 10, 23)
[not shown]........................................ Ref.
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 1/13
Page 6-25.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Whip Unit Instrument Tray Assembly
1
3
2
4
5
6
7
8
9
10
14
11
10
9
11
13
9
10
Serial Number
Prefix
Color
UW
sterling grey
PK
pebble grey
12
10
9
3
12
3
KA926500
Item
1
2
3
4
Part No.
Description
116599
120616
120612
119905
Tray (9.56 in. x 13.37 in.) ....................... 1
Tray (10.56 in. x 15.12 in.) ..................... 1
Screw .................................................... 4
Screw ................................................. 10
Tray Support (9.25 in. x 13.06 in.)
(sterling grey) ...................................... 1
(pebble grey)........................................ 1
Tray Support (10.12 in.14.62 in.)
(sterling grey) ...................................... 1
(pebble grey)........................................ 1
Plate (sterling grey) ............................. 1
Plate (pebble grey)............................... 1
(N.L.A.)
120613-01
5
(N.L.A.)
120615-01
(N.L.A.)
120617-50
Qty.
Item
6
7
8
9
10
11
12
13
14
Part No.
Description
Qty.
105480
120581-50
(N.L.A.)
120597-50
119458
119462
120579
(N.L.A.)
120580-50
(N.L.A.)
121079-50
120585-2
Screw .....................................................4
Tray Arm Plate .......................................1
Hub (sterling grey) ...............................1
Hub (pebble grey).................................1
Washer...................................................8
Needle Bearing ......................................4
Bearing ..................................................2
Bearing Cap (sterling grey) ..................2
Bearing Cap (pebble grey) ...................2
Tray Arm (sterling grey)........................1
Tray Arm (pebble grey) .........................1
Pin..........................................................1
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/12
Page 6-26
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Cuspidor Assembly
Overview
2
1
3
AF208300
Item
1
2
Part No.
Description
Page
Cuspidor Assy. Enclosure
Components................................... 6-28
Internal Tubing .................................. 6-16
Item
Part No.
3
Description
Page
Cuspidor Assy Hydraulic/Pneumatic
Components .................................. 6-29
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/01
Page 6-27
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Cuspidor Enclosure Components
1
2
10
3
4
7
5
8
6
4
8a
5
8b
12
9
13
22
11
23
14
15
16
17
18
19
Serial Number
Prefix
Color
UA, UC, UW
sterling grey
PL
pebble grey
21
24
20
AF210501
Applies to Serial Number Prefixes UA, UC, UW, PJ, PK, PL to V245614
Item
Part No.
Description
1
152922
2
3
4
5
6
• 122296-2
• 122335
• 122510
• 101043
153270
7
8a
• 122769-2
• 122770
Cup Filler Tube Assembly
(Includes items 2 thru 5) ........................ 1
Cup Filler Tube.................................... 1
Cuspidor Ferrule ................................. 1
Set Screw............................................ 2
O-ring .................................................. 1
Bowl Rinse Tube Assembly
(Includes items 4, 5, 7 thru 9) ................ 1
• Bowl Rinse Tube ................................. 1
• Bowl Rinse Tube Ferrule - later
units only................................................ 1
Bowl Rinse Tube Ferrule - early units only
(Obsolete use 002-0697-00 kit which
include items 4, 5, 8a, 9)....................... 1
• Bowl Rinse Stop .................................. 1
Gold Trap Kit.......................................... 1
Cuspidor Bowl Assembly (Includes
items 12 thru 14) ......................... N.L.A.
8b
9
10
11
• 122821
053-1082-00
152925
Qty
Item
Part No.
Description
12
13
•122222-6
• 122252
14
15
16
17
18
19
• 122326
040-0010-145
122322
122282-01
152913-6
(N.L.A.)
122283-01
(N.L.A.)
122321-50
(N.L.A.)
122324-50
122323
041-0010-04
122348
Cuspidor Bowl ............................... N.L.A.
Cuspidor Seal Insert
(Apply adhesive - p/n 064-0026-00) ... 1
O-ring .................................................... 2
Screw .................................................... 1
Drain Captivator .................................... 1
Inner Mounting Plat (pebble grey) ....... 1
Post Assembly ...................................... 1
Lower Housing (sterling grey) ............. 1
Lower Housing (pebble grey)............... 1
Bolt (sterling grey) ............................... 4
Bolt (pebble grey) ................................ 4
Support Collar (sterling grey) .............. 1
Support Collar (pebble grey) ................ 1
Screw .................................................... 4
Nut......................................................... 8
Pin (Used on LR Units Only) ................. 1
20
21
22
23
24
Qty
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 1/30/19
Page 6-28
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Cuspidor Assembly Hydraulic/
Pneumatic Components
1
27
2
14
26
25
5
5 14
3
6
24
8
16
9
9
28
7
5
4
5
9
19
14
14
15
5
5
6
14
17a
17b
18
13
3
7
8
12
10
23
11
20
Serial Number
Prefix
Color
UA, UC, UW
sterling grey
PL
pebble grey
9
NOTE:
21
Valve Housing on older units will
have 4 ports (17b). Valve Housing
on newer units has 2 ports (17a).
22
KA984101i
Applies to Serial Number Prefixes UA, UC, UW, PJ, PK, PL to V245614
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Part No.
Description
Qty.
152909
016-0888-00
029-2449-03
109714
117660
118940
115561
120388
121650
(N.L.A.)
120875-50
(N.L.A.)
122321-50
R4786
104499
117349
Cuspidor Drain Assy (incl. item 14) ....... 1
Control Valve Fitting............................... 1
Needle Valve.......................................... 2
Fitting ..................................................... 3
Gasket ................................................. 11
Control Valve ......................................... 3
Control Valve Cap .................................. 3
Trim Nut ................................................. 3
Set Screw .............................................. 3
Valve Knob (sterling) ............................ 1
Valve Knob (pebble).............................. 1
Bolt (sterling)...................................... 4
Bolt (pebble).......................................... 4
Drain Tubing.................................... 9.5 ft.
Clamp .................................................... 1
Fitting ..................................................... 8
Item
15
Part No.
Description
152914
Cuspidor Water Valve Assembly
(Includes items 9,16 & 17a) .................1
Cuspidor Water Valve Assembly Kit
(Includes items 9,16 & 17b) .................1
• Bowl Rinse Stop ..................................1
• Valve Housing Assembly .....................1
• Valve Housing w/ Barb Fittings ............1
Hex Nut4
Screw .....................................................1
Nut..........................................................1
Set Screw ...............................................1
Bowl Flush Adjuster ...............................1
Screw .....................................................1
Cup Filler Mount.....................................1
O-ring .....................................................1
Cup Fill Mount Stop................................1
Screw .....................................................2
Fitting .....................................................1
002-0687-00
16
17a
17b
18
19
20
21
22
23
24
25
26
27
28
• 122821
• 152933
• 029-2697-00
041-0010-04
040-0010-145
120387
120178
122301
040-0010-145
122327
122297
122377
106753
016-0888-00
Qty.
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 10/12
Page 6-28.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Cuspidor with Components
3
5
22
21
2
4
6
1
12
23
20
19
19
30
14
12
19
10
8
7
9
28
18 14
24
11
12
17
14
16
29
NOTE
All parts are
Pebble Grey
25
15
26
13
DA175801i
Used on units with Serial Number V245615 thru V352569
Item
Part No.
Description
Cuspidor Assy Retrofit Kit
(includes items1 thru 30) ............... N.L.A.
• 002-2100-00 • Cuspidor Bowl (includes item 7) ......... 1
• 053-1118-00
• Cup Fill Gasket ................................... 1
• 053-1228-02 • Cup Fill Spout...................................... 1
• 053-1119-00
• Bowl Rinse Gasket.............................. 1
• 053-1229-02 • Bowl Flush Spout ................................ 1
• 053-1082-00 • Deep Bowl Cuspidor Gold Trap Kit ..... 1
• 122640
• O-Ring................................................. 2
• 002-1019-01 • Bowl Flush Valve Assembly ................ 1
• 040-0010-145 • Screw .................................................. 1
• 016-0921-01 • Air Control Valve ................................. 2
• 050-4806-50 • Cuspidor Mount Bracket ..................... 1
• 040-0010-109 • Screw .................................................. 7
• 029-2487-00 • Cuspidor Drain Assembly .................. 1
• 002-1843-00 • Valve Knob Assy. (Incl. set screw) ...... 3
• • P11836
• • Set Screw ......................................... 1
152952-01
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Qty
Item
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Part No.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Description
Qty
029-2529-01 • Valve Knob Assm.(Incl. Set Screw) .....2
•P11836
• •Set Screw ...........................................2
052-0554-00-216 • Cuspidor Mount Post ........................1
029-2556-00
• Pinch Valve Assembly ......................1
029-2449-02
• Air Control Valve ...............................1
002-1720-00
• Purge Control Valve Assembly .........3
045-0001-118
• Washer..............................................1
106657
• Shoulder Screw ................................1
029-2490-00
• Cup Fill Valve Assembly ...........N.L.A.
050-4866-50
• Cup Fill Valve Bracket.......................1
020-0258-00-216 • Cuspidor Base ..................................1
• • Screw......................................N.L.A.
• 040-0006-64
061-0788-00
• Cuspidor Water Adjustment Label ....1
003-1133-00
• Cuspidor Flow Diagram (not shown) 1
053-0013-00
• Bumper .............................................4
040-0004-22
• Screw................................................4
029-2544-00
• Shuttle Valve .....................................1
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev.1/31/19
Page 6-29
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Cuspidor with Components
27
3
26
5
2
25
28
4
12
6
1
15
24
29
23
22
22
36
17
22
13
7
9
34
21 17
8
10
12
11
30
14
37
20
15
17
19
35
31
18
32
16
DA182000i
Used on units with Serial Number V352570 thru Present
Item
Part No.
Description
Cuspidor Assy Retrofit Kit
(includes items1 thru 31)................N.L.A.
002-2100-00 • Cuspidor Bowl (includes item 7) ..........1
053-1118-00
• Cup Fill Gasket ....................................1
053-1228-02 • Cup Fill Spout ......................................1
053-1119-00
• Bowl Rinse Gasket ..............................1
053-1229-02 • Bowl Flush Spout.................................1
053-1082-00 • Deep Bowl Cuspidor Gold Trap Kit......1
122640
• O-Ring .................................................2
029-4046-00 • Bowl Flush Valve Assembly
(incl. items 9 thru 11)............................1
• 106753
• • Set Screw ..........................................2
• 122297
• • O-ring ................................................1
• 117349
• • Connector..........................................1
040-0010-145 • Screw...................................................2
016-0921-01 • Air Control Valve ..................................2
050-4806-50 • Cuspidor Mount Bracket ......................1
040-0010-109 • Screw...................................................6
029-2487-00 • Cuspidor Drain Assembly ...................1
002-1843-00 • Valve Knob Assy. (Incl. set screw).......3
• P11836
• • Set Screw..........................................1
029-2529-01 • Valve Knob Assm.(Incl. Set Screw) .....2
• P11836
• • Set Screw ..........................................2
052-0554-00-216 • Cuspidor Mount Post........................1
029-2556-00
• Pinch Valve Assembly ......................1
152952-01
1
2
3
4
5
6
7
8
•
•
•
•
•
•
•
•
9
10
11
12
13
14
15
16
17
•
•
•
•
•
•
•
•
•
•
•
•
•
•
18
19
20
Qty
Item
Part No.
21
22
23
24
25
• 029-2449-02
• 002-1720-00
• 045-0001-118
• 106657
• 029-4043-00
26
27
28
29
30
31
32
33
34
35
36
37
38
Description
Qty
• Air Control Valve............................. 1
• Purge Control Valve Assembly....... 3
• Washer ........................................... 1
• Shoulder Screw.............................. 1
• Cup Fill Valve Assembly
(incl. items 26 thru 28) .................... 1
• • 122297
• • O-ring ........................................... 1
• • 106753
• • Set Screw..................................... 2
• • 117349
• • Connector..................................... 1
• 050-6999-00-216 • Cup Fill Valve Bracket .................... 1
• 020-0258-00-216 • Cuspidor Base................................ 1
• • Screw ................................... N.L.A.
• • 040-0006-64
• 061-0788-00
• Cuspidor Water Adjustment Label.. 1
• 003-1133-00
• Cuspidor Flow Diag.(not shown) .... 1
• 053-0013-00
• Bumper........................................... 4
• 040-0004-22
• Screw ............................................. 4
029-2544-00
Shuttle Valve..................................... 1
029-4044-00
2-Way Valve...................................... 2
002-1019-00
Kit, Cuspidor Bowl Flush, Cup Fill, and
2-Way Valves (incl. items 8, 15, 25,
29, 37) .............................................. 1
002-1019-01
Kit, Cuspidor Bowl Flush and 2-Way
Valve (incl. items 8,12,37.................. 1
002-1019-02
Kit, Cuspidor Cup Fill and 2-Way
Valve (incl. items 12,25,29)............... 1
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 1/31/19
Page 6-29.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Chair Mounted Console Assembly
Overview
5
1
2
4
3
AF212500
Item
1
2
3
Part No.
Description
Page
Cuspidor Assembly .......................... 6-27
Chair Mounted Console Assembly
Enclosure Components ................. 6-32
Internal Tubing.................................. 6-16
Item
Part No.
4
5
Description
Page
Chair Mounted Console Assembly
Internal Components......................6-33
Delivery Unit Arm Assembly .............6-52
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/01
Page 6-30
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Floor Mounted Console Assembly
Overview
1
2
3
KA934000
Item
1
2
Part No.
Description
Page
Cuspidor Assembly .......................... 6-27
Floor Mounted Console Assembly
Housing Components .................... 6-34
Item
Part No.
3
4
Description
Page
Floor Mounted Console Base
Assembly Components ..................6-35
Internal Tubing (not shown) ..............6-16
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/01
Page 6-31
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Chair Mounted Console Assembly
Enclosure Components
6b
1
2
17
3
16
4
14
15
5
6a
8
7
18
13
9
10
11
8
8
12
Serial Number
Prefix
Color
UA, UC, UW
sterling grey
PL
pebble grey
11
AF209700
Item
1
2
3
4
5
6a
6b
7
Part No.
Description
122336
122353
Upper Bearing ....................................... 1
Cuspidor Bearing .................................. 1
Solids Collector Kit (incl. cover & o-ring)
(sterling grey).................................... 1
(pebble grey) ..................................... 1
• Cover (pebble grey)........................... 1
• O-ring.................................................. 1
Knight Logo ........................................... 1
Refer to “Cuspidor Assembly”) ........... Ref
Universal Hole Plug Kit
(sterling grey)................................. AR
(pebble grey) .................................. AR
Clip ........................................................ 1
(N.L.A.)
002-0691-01
• 057-0831-50
• 118614
121527
153170
153170-01
109191
Qty
Item
Part No.
Description
8
9
10
151779
TP1622
122285
122285-01
040-0001-10
TPW1484
003-1278-00
275184
121700
122354
122284
122284-01
122286
122286-01
Thumbscrew .......................................... 3
Flow Diagram......................................... 1
RH Side Cover (sterling grey) .............. 1
RH Side Cover (pebble grey) ............... 1
Gasket ................................................... 2
Rating Label........................................... 1
Wiring Diagram ...................................... 1
Foam Tape (six 1/2 in. pcs)............. 0.5 ft.
Set Screw .............................................. 2
Collar ..................................................... 1
Cover (sterling grey) ............................ 1
Cover (pebble grey).............................. 1
LH Side Cover (sterling grey)............... 1
LH Side Cover (pebble grey) ................ 1
11
12
13
14
15
16
17
18
Qty
(N.L.A.) Denotes “No Longer Available”
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 01/10
Page 6-32
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Chair Mounted Console Assembly
Internal Components
2
NOTE: All painted/plastic
components on this page
are Sterling Grey
40
1
42
41
3
4
38
5
39
6
9
34
9
7
26
25
8
31
9
25 35
9
32
33
29
36
10
30
5
11
5
12
26
37
13
13
5
8
14
28
26
15
17
27
16
17
24
43
23
25
22
20
21
18
19
18
44
DA158202i
Applies to units with “UA”, UC”, & “UW” serial number prefixes
Item
1
2
3
Part No.
Description
030-1452-50
122400-50
152019
Frame .................................................... 1
Accessory Mounting Plate..................... 1
Hdpc. Illumination Power Pack - 120V
(Apply w/Foam Tape p/n 275184) ....... 1
Hdpc. Illumination Power Pack - 230V
(Apply w/Foam Tape p/n 275184) ....... 1
Screw .................................................... 4
Clip ........................................................ 8
Basket ................................................... 1
152020
4
5
6a
6b
7
8
9
10
11
12
121337-2
109191
118613
002-10259-00
(N.L.A.)
P1673
120199
P15280
122363
120236
153275
13
14
15
16
17
18
19
20
21
118183-1
120875-50
120227
120178
137258
153073
122309-50
101928
101927
Qty
Basket bulk kit ......................................... 50
Housing ................................................. 1
Washer .................................................. 8
Screw .................................................... 8
Cap Plug ............................................... 1
Screw .................................................... 2
Hole Plug - Only Used On Units w/o
Optional Auxiliary Switch (shown) .... 1
Auxiliary Switch - Only Used On Units w/
Opt. Auxiliary Switch (not shown) ..... 1
Needle Valve (Includes hardware) ........ 1
Knob ...................................................... 1
Hole Plug............................................... 2
Set Screw .............................................. 1
Poly Quick Water Disconnect (Female). 1
3-Way Toggle (Includes hardware)........ 1
Panel (Apply 061-0778-00 label)........... 1
Male Terminal........................................ 3
Female Connector................................. 1
Item
Part No.
Description
22
23
24
25
26
27
28
29
30
31
32
120995
015-0083-01
102958
015-2104-00
122357
275283
122295-50
122361
118917
050-5872-50
120913
33
34
122362-50
106753
35
36
37
122339
122310-50
002-0745-00
Umbilical Retaining Plate....................... 2
Receptacle............................................. 1
Receptacle Box...................................... 1
Connector .............................................. 1
Keps Nut .............................................. 25
Power Cord (120 VAC).................... 9.5 ft.
Bottom Panel ......................................... 1
Spacer ................................................... 2
Cap Plug ............................................... 1
Solids Collector Bracket......................... 1
Set Screw (Apply Loctite* 242
p/n 042-0024-00)................................. 2
Receptacle............................................. 1
Set Screw (Apply Loctite* 242
p/n 042-0024-00)................................. 3
Lower Bearing........................................ 1
Foot End Panel ...................................... 1
Bottle Replacement Kit (1.0 liter)
(Includes item 39, 40).......................... 1
Bottle Replacement Kit (2.0 liter)
(Includes item 39)................................ 1
Bottle Cap Assy. (Includes Item 39)....... 1
• O-Ring ................................................. 1
Screw..................................................... 2
Screw..................................................... 1
Water Bottle Bracket .............................. 1
Screw..................................................... 4
Poly Quick Water Disconnect (Male) ..... 1
153282
38
39
40
41
42
43
44
002-1813-00
• 014-0176-52
120385
101755
122298-50
121698-5
137259
Qty
(N.L.A. denotes “No Longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/6/18
Page 6-33
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Chair Mounted Console Assembly
Internal Components
NOTE: All painted/plastic
components on this page
are Pebble Grey
2
1
43
3
42
41
4
39
5
40
6
9
9
35
7
26
31
32
25
25
8
36
9
31
34
9
33
29
37
10
30
5
11
5
12
38
26
13
13
5
8
14
28
26
15
17
27
16
17
24
44
23
25
22
18
20
21
19
18
45
DA158302i
Applies to units with serial numbers PL1000 thru PL1571
Item
Part No.
Description
1
2
3
030-1452-50
122400-50
152019
152020
4
5
6a
6b
7
8
9
10
11
12
121337-2
109191
118613
002-10259-00
002-1805-00
P1673
120199
P15280
122363
Frame .................................................... 1
Accessory Mounting Plate..................... 1
Hdpc. Illumination Power Pack (120 V) . 1
Hdpc. Illumination Power Pack (230 V) . 1
(Apply Foam Tape p/n 275184)
Screw .................................................... 4
Clip ........................................................ 8
Basket ................................................... 1
120236-50
13
14
15
16
17
18
19
20
21
22
153275
118183-1
120875-50
120227-50
120178
137258
153073
122309-50
101928
101927
120995-00
Qty
Basket bulk kit ......................................... 50
Housing kit ............................................ 1
Washer .................................................. 8
Screw .................................................... 8
Cap Plug ............................................... 1
Screw .................................................... 2
Units w/o Auxiliary Switch
Hole Plug (shown) ................................. 1
Units w/Auxiliary Switch..................... 1
Auxiliary Switch (not shown)............... 1
Needle Valve (Includes hardware) ........ 1
Knob ...................................................... 1
Hole Plug............................................... 2
Set Screw .............................................. 1
Poly Quick Water Disconnect (Female). 1
3-way Toggle (Includes hardware)......... 1
Panel (Apply 061-0778-00 label)........... 1
Male Terminal........................................ 3
Female Connector................................. 1
Umbilical Retaining Plate ...................... 2
Item
Part No.
Description
23
24
25
26
27
28
29
30
31
32
33
015-0083-01
102958
015-2104-00
122357
275283
122295-50
122361
118917
122299-2
122300-50
120913
34
35
122362-50
106753
36
37
38
122339
122310-50
002-0777-00
153282
39
40
41
42
43
44
45
002-1813-00
• 014-0176-52
120385
101755
122298-50
121698-5
137259
Receptacle............................................. 1
Receptacle Box...................................... 1
Connector .............................................. 1
Keps Nut .............................................. 25
Power Cord (120 VAC).................... 9.5 ft.
Bottom Panel ......................................... 1
Spacer ................................................... 2
Cap Plug (Used on Earlier Units)........... 1
Receptacle Mounting Bracket ................ 2
Solids Collector Bracket......................... 1
Set Screw (Apply Loctite* 242
p/n 042-0024-00)................................. 2
Receptacle............................................. 1
Set Screw (Apply Loctite* 242
p/n 042-0024-00)................................. 3
Lower Bearing........................................ 1
Foot End Panel ...................................... 1
Bottle Replacement Kit (1.0 liter) ........... 1
Bottle Replacement Kit (2.0 liter)
(Includes item 40)................................ 1
Bottle Cap Assy. (Includes Item 40)....... 1
• O-Ring ................................................. 1
Screw..................................................... 2
Screw..................................................... 1
Water Bottle Bracket .............................. 1
Screw..................................................... 4
Poly Quick Water Disconnect (Male) ..... 1
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/6/18
Page 6-33.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Chair Mounted Console Assembly
Internal Components
NOTE: All painted/plastic
components on this
page are Pebble
2
35
1
37
36
3
4
33
5
34
6
31
9
28
7
21
21
21
8
25
9
29
27
9
26
23
10
24
5
30
11
5
12
21
32
13
13
38
8
14
22
21
15
17
16
17
18
19
18
20
40
DA158401i
Applies to units with serial numbers PL1572 thru Present
Applies to units with serial numbers V2200 thru Present
Item
Part No.
Description
1
2
3
030-1452-50
122400-50
029-2876-00
152020
4
5
6a
6b
7
8
9
10
11
12
040-0010-109
109191
118613
002-10259-00
002-1805-00
P1673
040-0010-145
P15280
122363
Frame..................................................... 1
Accessory Mounting Plate ..................... 1
Hdpc. Illumination Power Pack (120 V).. 1
Hdpc. Illumination Power Pack (230 V).. 1
(Apply Foam Tape p/n 275184)
Screw ..................................................... 7
Clip......................................................... 6
Basket.................................................... 1
Basket bulk kit...................................... 50
Housing Kit ............................................ 1
Washer ................................................ 10
Screw ..................................................... 2
Cap Plug ................................................ 1
Screw ..................................................... 2
Units w/o Auxiliary Switch
Hole Plug (shown) ................................. 1
Units w/Auxiliary Switch ..................... 1
Auxiliary Switch (not shown) ............... 1
Needle Valve (Includes hardware) ......... 1
Knob ...................................................... 1
Hole Plug ............................................... 1
Set Screw .............................................. 1
Poly Quick Water Disconnect (Female) . 1
3-way Toggle (Includes hardware) ......... 1
Panel (Apply 061-0778-00 label) ........... 1
Umbilical Retaining Plate....................... 2
Keps Nut .............................................. 17
120236-50
13
14
15
16
17
18
19
20
21
153275
118183-1
120875-50
120227-50
120178
137258
153073
122309-50
120995-00
122357
Qty
Item
22
23
24
25
26
27
28
29
30
31
32
Part No.
Description
122295-50
122361
118917
050-5872-50
120913
122362-50
106753
122339
122310-50
120199
002-0745-00
Bottom Panel......................................... 1
Spacer ................................................... 2
Cap Plug (Earlier Units Only) ............... 1
Solids Collector Bracket ........................ 1
Set Screw (Apply Loctite #042-0024-00)2
Receptacle ............................................ 1
Set Screw (Apply Loctite #042-0024-00)3
Lower Bearing ....................................... 1
Foot End Panel...................................... 1
Screw .................................................... 2
Bottle Replacement Kit (1.0 liter)
(Includes Items 33, 34) ....................... 1
Bottle Replacement Kit (2.0 liter)
(Includes Item 33) ............................... 1
Bottle Cap Assy. (Includes Item 34) ...... 1
• O-Ring ................................................ 1
Water Bottle and Cap Kit (Includes Cap
[35], 750 ml Bottle [33], Screws [36], Hole
Plugs [Not Shown] and Cover Drilling
Template [Not Shown]) .......................... 1
Screw .................................................... 2
Screw .................................................... 1
Water Bottle Bracket.............................. 1
Cord Clip Push Mount ........................... 4
Screw (Not Shown) ............................... 2
Poly Quick Water Disconnect (Male) ..... 1
153282
33
34
002-1813-00
• 014-0176-52
002-0745-00
35
36
37
38
39
40
120385
101755
122298-50
053-1354-00
121698-5
137259
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/6/18
Page 6-33.2
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Floor Mounted Console Assembly
Housing Components
1
2
39
35
3
40
4
5
38
7
6
34
37
36
19
13
30
22
10
9
31
29
21
9
8
19
32
11
27
33
25
12
22
28
25
10
20
11
41
26
13
25 42
24
43
12
23
20
16
11
14
12
19
17
18
15
11
12
DA158500i
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Part No.
Description
(N.L.A.)
P11836
117506
(N.L.A.)
118614
121768-50
121767
120242-2
117601
(N.L.A.)
156310
(N.L.A.)
155551
120233
(N.L.A.)
152879
Trim Cap ............................................. 1
Set Screw .............................................. 2
Bearing.................................................. 1
Cover..................................................... 1
O-ring .................................................... 1
Hole Plug............................................... 1
Top Cover .............................................. 1
Receptacle ............................................ 1
Screw .................................................... 4
Side Panel ............................................. 2
Nylon Washer........................................ 8
Thumbscrew.......................................... 8
Screw .................................................... 2
Screw .................................................... 4
Panel (Foot End) ................................... 1
Power Cord/Receptacle Assembly
(For parts breakdown, refer to
“FM Console Power Cord/
Receptacle Assembly” ........................ 1
Post..................................................... 1
Bottom Panel......................................... 1
Keps Nut................................................ 9
Toggle Switch ........................................ 1
Poly Quick Water Disconnect (Female). 1
Needle Valve (Includes hardware.......... 1
Cord Clip ............................................. 11
1(N.L.A.)
121779-1
122357
117392
137258
029-2449-01
109191
Qty
Item
Part No.
Description
24
25
120236
121807
Hole Plug (0.5 in. dia) ............................ 2
Washer (Apply Loctite* 242
p/n 042-0024-00)................................. 3
Hole Plug (.75 in. dia) ............................ 1
Set Screw .............................................. 1
Poly Quick Water Disconnect (Male) ..... 1
Knob ...................................................... 1
Basket.................................................... 1
Basket bulk kit...................................... 50
Housing (Includes items 32 & 33).......... 1
• Caplug ................................................. 1
• Caplug ................................................. 1
Mount Assembly.................................. 1
Items 35 thru 38 apply only to units
with Cuspidor
Refer to “Cuspidor Assembly”)........... Ref
Bearing .................................................. 1
Set Screw .............................................. 2
Collar ..................................................... 1
Items 39 thru 42 apply only to units
w/o Cuspidor
Hole Plug ............................................... 1
Threaded Rod........................................ 1
Plate....................................................... 1
Wing Nut ................................................ 1
Panel (Head End) .................................. 1
26
27
28
29
30a
30b
31
32
33
34
120227
120178
137259
120170-50
118613
002-10259-00
(N.L.A.)
• P15280
• 118917
(N.L.A.)
35
36
37
38
122384
121700
122354
39
40
41
42
43
(N.L.A.)
120381
(N.L.A.)
101248
120648-3
Qty
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/6/18
Page 6-34
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Floor Mounted Console Base
Assembly Components
31
3
33
32
1
10
2
27
30
10
24
2
26
21
2
25
2
22
3
6
29
21
23
4
2
6
5
2
6
20
8
7
19
9
28
3
18
11
2
17
16
15
10
14
6
3
13
12
KA931800
Item
Part No.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
(N.L.A.)
122357
120233
103192
(N.L.A.)
101755
120199
(N.L.A.)
120637
(N.L.A.)
117921
C5610
Top Cover .............................................. 1
Keps Nut.............................................. 22
Screw .................................................. 14
Snap Bushing ........................................ 1
Front Cover............................................ 1
Screw .................................................. 15
Screw .................................................... 3
Front Skirt.............................................. 1
Hole Plug............................................... 2
Panel (Head End).................................. 1
Bracket .................................................. 4
Screw .................................................... 2
Refer to “Valve Block Assembly”) ....... Ref
Spacer ................................................... 2
Base Frame Weldment.......................... 1
Panel Support Assembly ....................... 1
Standoff ................................................ 2
100884
(N.L.A.)
149833
117527
Qty
Item
Part No.
Description
Qty
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
117878
(N.L.A.)
122363
015-0083-01
(N.L.A.)
040-0375-76
102958
121791
152543-50
(N.L.A.)
151847
P14718
117967-2
118034
117649
101317
TP1119
Rear Cover............................................. 1
Back Cover ............................................ 1
Screw..................................................... 2
Receptacle (Includes two screws) ......... 1
Receptacle Plate.................................... 1
Screw..................................................... 4
Jiffy Box ................................................. 1
Hex Bolt ................................................. 8
Adapter Weldment ................................. 1
Panel (Foot End).................................... 1
Ground Wire Assembly.......................... 2
Lockwasher............................................ 2
Skirt Plate .............................................. 2
Plastic Anchor........................................ 8
Washer................................................... 8
Screw..................................................... 8
Installation Instructions (not shown) ...... 1
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/14
Page 6-35
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
FM Console Power Cord /
Receptacle Assembly
15
1
18
2
3
6
4
5
7
8
9
10
11
14
12
13
1
18
KA936402
Item
1
2
3
4
5
6
7
8
9
Part No.
Description
Qty
015-0083-01
P507
275283
P16223
275289
015-2104-00
102958
112504
120492
Receptacle (Includes hardware)............ 2
Nut......................................................... 2
Cable .............................................. 9.5 ft.
Terminal................................................. 2
Wire (green) .................................. 0.66 ft
Connector.............................................. 1
Receptacle Box ..................................... 1
Label ..................................................... 1
Receptacle Box ..................................... 1
Item
Part No.
Description
Qty
10
11
12
13
14
15
16
17
18
151912
P14718
117787
120199
120369
120237
275287
275288
121698-5
Ground Wire Assembly.......................... 1
Lockwasher............................................ 1
Screw..................................................... 1
Screws ................................................... 2
Insulator ................................................. 1
Receptacle Cover .................................. 1
Jumper Wire-[black (not shown)] .. 0.66 ft.
Jumper Wire-[white (not shown)] .. 0.66 ft.
Screw..................................................... 4
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 8/06
Page 6-36
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Instrument Tray Arm Assembly
1
3
2
4
5
6
3
7
8
9
8
9
15
8
9
14
13
8
9
Serial Number
Prefix
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL, PM
pebble grey
10
12
11
3
AF211100
Item
1
2
3
4
5
6
Part No.
Description
Qty.
N.L.A.)
152146-01
• 116599
• 120612
• 119905
• N.L.A.)
• 120613-01
• N.L.A.)
• 120617-50
• N.L.A.)
• 121082-50
Instrument Tray Assembly
(includes items 1 thru 15)
(sterling grey) .................................... 1
(pebble grey) ..................................... 1
• Tray ..................................................... 1
• Screw .................................................. 4
• Screw ............................................... 10
• Tray Support (sterling grey) .............. 1
• Tray Support (pebble grey) ................ 1
• Plate (sterling grey)........................... 1
• Plate (pebble grey) ............................ 1
• Cap (sterling) (apply Silicone RTV) .. 1
• Cap (pebble) (apply Silicone RTV) .... 1
Item
Part No.
Description
7
8
9
10
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
11
12
13
14
15
121081-2
119462
119458
N.L.A.)
121080-50
152145
N.L.A.)
120580-50
N.L.A.)
121079-50
120579
120585-2
Qty.
Bearing Cap ........................................1
Needle Bearing ...................................4
Washer ................................................8
Post (sterling grey) ............................1
Post (pebble grey)..............................1
Knob Assembly ...................................1
Bearing Cap (sterling grey) ...............1
Bearing Cap (pebble grey).................1
Tray Arm (sterling grey) .....................1
Tray Arm (pebble grey).......................1
Bearing ................................................2
Tray Arm Pin ........................................1
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-37
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Tub Support Arm Assembly
2
3
4
5
6
14
1
7
8
7
8
7
8
13
12
7
8
16
9
15
11
10
5
17
18
Serial Number
Prefix
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL, PM
pebble grey
19
AF211201i
Item
Part No.
Description
(N.L.A.)
152423-01
• 119905
• (N.L.A.)
• 050-5293-50
• (N.L.A.)
• 121082-50
• 120612
• 121081-2
• 119462
• 119458
• (N.L.A.)
• 121080-50
Tub Support Arm Assembly
(Includes Items 2 thru 14)
(sterling grey) .................................... 1
(pebble grey) (Prior to 2003) ............ 1
• Screw .................................................. 4
• Tub Support (sterling grey) ............... 1
• Tub Support (pebble grey)................. 1
• Cap (sterling) (apply Silicone RTV) ... 1
• Cap (pebble) (apply Silicone RTV)..... 1
• Screw .................................................. 6
• Bearing Cap........................................ 1
• Needle Bearing ................................... 4
• Washer................................................ 8
• Post (sterling grey) ............................ 1
• Post (pebble grey) ............................. 1
1
2
3
4
5
6
7
8
9
Qty.
Item
Part No.
Description
10
11
13
14
15
• 152145
• (N.L.A.)
• 120580-50
• (N.L.A.)
• 121079-50
• 120579
• 120585-2
029-2791-00
16
17
18
19
•
•
•
•
• Knob Assembly ...................................1
• Cap (sterling grey).............................1
• Cap (pebble grey) ..............................1
• Tray Arm(sterling grey) .....................1
• Tray Arm(pebble grey) .......................1
• Bearing ................................................2
• Tray Arm Pin ........................................1
Tub Support Arm Assembly(2003 and
After) (Includes Items 16 thru 19)
• Screw ..................................................4
• Tub Support.........................................1
• Tray Mount Arm ...................................1
• Flange Bearing ....................................1
12
119905
050-5293-50
029-2794-50
016-0131-22
Qty.
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605
Rev. 12/09
Page 6-38
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Asepsis 21 Duo / Assistant’s Top
Components
1
29
2
6
3
7
4
15
8
3
13
7
14
9
12
3
28
11
4
27
25
5
26
16
10
21
20
18
AS
EP
SIS
17
15
19
21
20
111
21
20
22
23
24
AF212800
Applies to units with “UA”& “UK” serial number prefixes
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Part No.
Description
121504
121075-2
119034
119033
152161
• 121024-50
• 121025
• 121105-50
• 121023-50
• 122979
122980
• 121148
• 120913
119888
121076
120372
Top .........................................................1
Stud .......................................................1
Race Bearing .........................................3
Thrust Bearing .......................................2
Instrument Arm Assy. (incl. 6 thru 12)....1
• Arm Holder Pin ....................................1
• Washer ................................................2
• Instrument Holder Arm ........................1
• Holder Mount .......................................1
• Hndpc. Holder (3 position- shown) ......1
Hndpc. Holder (4 position- not shown) 1
• Set Screw ............................................1
• Set Screw ............................................1
O-ring .....................................................2
Arm Stop Post ........................................2
Screw .......................................................
Qty
Item
16
17
18
19
20
21
22
23
24
Part No.
Description
155287
106657
121070-2
121067-50
121073
121072
121071-2
Washer .................................................. 1
Screw..................................................... 1
Block ...................................................... 1
Support Arm Bottom Cover ................... 1
Race Bearing......................................... 3
Thrust Bearing ....................................... 2
Stud ....................................................... 1
Refer to “Cart Assy Base Compnts.”) Ref
Refer to “Asepsis 21 Duo/
Assistant’s Housing Components”) . Ref
Refer to “Asepsis 21 Delivery
Unit Assembly”)............................... Ref
Race Bearing......................................... 1
Screw..................................................... 6
Support Weldment ................................ 1
Hole Plug ............................................... 1
25
26
27
28
29
121074
121077
152119-50
120236
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 1/13
Page 6-39
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Asepsis 21 Duo / Assistant’s Top
1
Components 29
2
6
3
7
4
15
8
3
13
7
14
9
12
3
28
11
4
27
25
5
26
16
10
21
20
18
AS
EP
SIS
17
15
19
21
20
111
21
20
22
23
24
NOTE: All painted/plastic
components on this page
are Pebble Grey
AF212801i
Applies to units with “PM” serial number prefix
Applies to units with serial numbers PL1572 thru Present
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Part No.
Description
063-9942-00
121075-2
119034
119033
152161-01
Top .........................................................1
Stud .......................................................1
Race Bearing .........................................3
Thrust Bearing .......................................2
Assistant’s Instrument Holder
Arm Assy. (Includes items 6 thru 12)...1
• Arm Holder Pin ....................................1
• Washer ................................................2
• Instrument Holder Arm ........................1
• Holder Mount .......................................1
• Hndpc. Holder (3 position- shown) ......1
Hndpc. Holder (4 position- not shown) 1
• Set Screw ............................................1
• Set Screw ............................................1
O-ring .....................................................2
Arm Stop Post ........................................2
Screw .......................................................
•
•
•
•
•
121024-50
121025
121105-50
121023-50
122979
122980
• 121148
• 120913
119888
121076
120372
Qty
Item
16
17
18
19
20
21
22
23
Part No.
Description
155287
106657
121070-2
121067-50
121073
121072
121071-2
Washer .................................................. 1
Screw..................................................... 1
Block ...................................................... 1
Support Arm Bottom Cover ................... 1
Race Bearing......................................... 3
Thrust Bearing ....................................... 2
Stud ....................................................... 1
Refer to “Cart Assembly Base
Components”) ................................. Ref
Refer to “Asepsis 21 Duo/
Assistant’s Housing Components”) . Ref
Refer to “Asepsis 21 Delivery
Head Assembly”)............................. Ref
Race Bearing......................................... 1
Screw..................................................... 6
Support Weldment ................................ 1
Hole Plug ............................................... 1
24
25
26
27
28
29
121074
121077
152119-50
120236-50
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-39.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Asepsis 21 Duo / Assistant’s
Housing Components
21
NOTE: All painted/plastic
components on this page
are Sterling Grey
1
41
36
39
35
39
34
40
2
42
3
37
33
38
43
31
32
6
28
27
49 45
29
30
6
46
44
26
5
4
47
7
23
25
6
48
8
22
24
17
21
9
9
20
16
10
14
13
19
18
11
15
12
50
6
DA158602i
Applies to units with “UA”& “UK” serial number prefixes
Item
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
122357
153025
121015-50
149730
121032-50
121698-5
153073
120178
120170-50
137258
120388
029-2449-01
16
17
117558
152070
18
19
20
21
22
23
24
• 053-2353-00
• 121547
• 120933
• 120932
• 120934-6
• 117349
121016-1
DescriptionQty
Item
Part No.
DescriptionQty
Refer to “Asepsis 21 Duo/Assistant’s
Top Components”)........................... Ref
Keps Lock Nut........................................9
Adhesive Backing (Included w/ item 4) ..1
Power Pack ............................................1
Side Panel (Right)..................................1
Thumbscrew ..........................................6
Front Cover ............................................1
Screw .................................................... 2
3-way Toggle (Includes hardware) .........1
Set Screw...............................................1
Knob.......................................................1
Poly Quick Water Disconnect (Female) .1
Nut .......................................................1
Needle Valve ..........................................1
Refer to “Cart Assembly Base
Components”).................................. Ref
Screw .....................................................2
Air / Oil Separator
(Includes items 18 thru 23)..................1
• Bottle ...................................................1
• Gauze Sponge ....................................7
• Diffuser ................................................1
• Manifold ...............................................1
• Cap......................................................1
• Fitting...................................................3
Side Panel (Left) ....................................1
25
26
27
28
29
30
31
32
33
34a
34b
35
36
37
38
39
40
41
42
43
002-0777-00
002-1813-00
014-0176-52
120391-50
P9216
120199
P15280
118917
(N.L.A.)
118613
002-10259-00
118614
(N.L.A.)
151785-50
121033-50
145756
120392
121011-50
120725
152138
44
45
46
47
48
49
50
121065-2
015-2104-00
102958
117695
120236
121012-50
137259
Bottle (1 liter) .........................................1
Cap Assembly (incl. Item 27) .................1
O-Ring ...................................................1
Support Bracket .....................................1
Screw .....................................................2
Screw .....................................................2
Cap Plug ................................................1
Cap Plug ................................................1
Housing Assembly...............................1
Basket ....................................................1
Basket bulk kit...................................... 50
O-ring .....................................................1
Cover .....................................................1
Screw .....................................................2
Rear Cover............................................1
Regulator ...............................................1
Regulator Mounting Bracket ..................1
Top Cover...............................................1
Transformer............................................1
Valve Block Assembly (For parts
breakdown refer to “Valve Block
Assembly Components”) ................. Ref
Valve Mounting Block.............................2
Connector ..............................................1
Jiffy Box .................................................1
Receptacle .............................................1
Plug........................................................3
Bottom Panel .........................................1
Poly Quick Water Disconnect (Male) .....1
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/6/18
Page 6-40
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Asepsis 21 Duo / Assistant’s
21
Housing Components
NOTE: All painted/plastic
components on this page
are Pebble Grey
36
1
41
39
35
39
34
40
2
42
3
37
33
38
43
31
32
6
28
27
49 45
29
30
6
46
44
26
5
4
47
7
23
25
6
24
48
8
22
17
21
9
9
20
16
10
14
13
19
18
11
15
12
50
6
DA158702i
Applies to units with serial numbers PM1000 thru PM1163
Item
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
122357
153025
121015-50
149730
121032-50
121698-5
153073
120178
120170-50
137258
120388
029-2449-01
16
17
117558
152070
18
19
20
21
22
23
24
• 053-2353-00
• 121547
• 120933
• 120932
• 120934-6
• 117349
121016-50
Description
Qty
Refer to “Asepsis 21 Duo/Assistant’s
Top Components”) ...........................Ref
Keps Lock Nut ....................................... 9
Adhesive Backing (Included w/ item 4).. 1
Power Pack............................................ 1
Side Panel (Right) ................................. 1
Thumbscrew .......................................... 6
Front Cover............................................ 1
Screw ................................................... 2
3-way Toggle (Includes hardware)......... 1
Set Screw .............................................. 1
Knob ...................................................... 1
Poly Quick Water Disconnect (Female) . 1
Nut ....................................................... 1
Needle Valve ......................................... 1
Refer to “Cart Assembly Base
Components”) ..................................Ref
Screw .................................................... 2
Air / Oil Separator
(Includes items 18 thru 23) ................. 1
• Bottle................................................... 1
• Gauze Sponge .................................... 7
• Diffuser ............................................... 1
• Manifold .............................................. 1
• Cap ..................................................... 1
• Fitting .................................................. 3
Side Panel (Left).................................... 1
Item
Part No.
Description
25
26
27
28
29
30
31
32
33
34a
34b
35
36
37
38
39
40
41
42
43
002-0777-00
002-1813-00
014-0176-52
120391-50
P9216
120199
P15280
118917
002-1805-00
118613
002-10259-00
118614
057-0831-50
151785-50
121033-50
145756
120392-50
121011-50
120725
152138
44
45
46
47
48
49
50
121065-2
015-2104-00
102958
117695
120236-50
121012-50
137259
Bottle (1 liter) .........................................1
Cap Assembly (incl. Item 27) .................1
O-Ring ...................................................1
Support Bracket .....................................1
Screw .....................................................2
Screw .....................................................2
Cap Plug ................................................1
Cap Plug (Earlier Units Only).................1
Housing Kit ............................................1
Basket ....................................................1
Basket bulk kit...................................... 50
O-ring .....................................................1
Cover .....................................................1
Screw .....................................................2
Rear Cover............................................1
Regulator ...............................................1
Regulator Mounting Bracket ..................1
Top Cover...............................................1
Transformer............................................1
Valve Block Assembly (For parts
breakdown refer to “Valve Block
Assembly Components”) ................. Ref
Valve Mounting Block.............................2
Connector ..............................................1
Jiffy Box .................................................1
Receptacle .............................................1
Plug........................................................3
Bottom Panel .........................................1
Poly Quick Water Disconnect (Male) .....1
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/6/18
Page 6-40.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Asepsis 21 Duo / Assistant’s
Housing Components
21
NOTE: All painted/plastic
components on this page
are Pebble Grey
1
40
35
38
34
38 39
33
2
41
3
36
32
37
42
30
31
5
4
6
27
6
43
25
45
28
29
26
44
7
22
24
6
23
21
16
20
8
8
19
15
9
13
12
18
17
10
14
11
6
46
DA158801i
Applies to units with serial numbers PM1164 thru PM1507
Item
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
122357
153025
121015-50
149730
029-2904-50
153073
120178
120170-50
137258
120388
029-2449-01
15
16
117558
152070
17
18
19
20
21
22
•
•
•
•
•
•
053-2353-00
121547
120933
120932
120934-6
117349
Description
Qty
Refer to “Asepsis 21 Duo/Assistant’s
Top Components”) ...........................Ref
Keps Lock Nut ....................................... 9
Adhesive Backing (Included w/ item 4).. 1
Power Pack............................................ 1
Side Panel (Right) ................................. 1
Thumbscrew .......................................... 6
Front Cover............................................ 1
3-way Toggle (Includes hardware)......... 1
Set Screw .............................................. 1
Knob ...................................................... 1
Poly Quick Water Disconnect (Female) . 1
Nut ....................................................... 1
Needle Valve ......................................... 1
Refer to “Cart Assembly Base
Components”) ..................................Ref
Screw .................................................... 2
Air / Oil Separator
(Includes items 18 thru 23) ................. 1
• Bottle................................................... 1
• Gauze Sponge .................................... 7
• Diffuser ............................................... 1
• Manifold .............................................. 1
• Cap ..................................................... 1
• Fitting .................................................. 3
Item
Part No.
Description
23
24
25
26
27
28
29
30
31
32
33a
33b
34
35
36
37
38
39
40
41
42
121016-50
002-0777-00
002-1813-00
014-0176-52
120391-50
P9216
120199
P15280
118917
002-1805-00
118613
002-10259-00
118614
057-0831-50
151785-50
121033-50
145756
120392-50
121011-50
120725
152138
Side Panel (Left) ....................................1
Bottle (1 liter) .........................................1
Cap Assembly (incl. Item 26) .................1
O-Ring ...................................................1
Support Bracket .....................................1
Screw .....................................................2
Screw .....................................................2
Cap Plug ................................................1
Cap Plug (Earlier Units Only).................1
Housing Kit ............................................1
Basket ....................................................1
Basket bulk kit...................................... 50
O-ring .....................................................1
Cover .....................................................1
Screw .....................................................2
Rear Cover............................................1
Regulator ...............................................1
Regulator Mounting Bracket ..................1
Top Cover...............................................1
Transformer............................................1
Valve Block Assembly (For parts
breakdown refer to “Valve Block
Assembly Components”) ................. Ref
Valve Mounting Block.............................2
Plug........................................................3
Bottom Panel .........................................1
Poly Quick Water Disconnect (Male) .....1
43
44
45
46
121065-2
120236-50
121012-50
137259
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev 2/6/18
Page 6-40.2
Printed in U.S.A.
Return To Table Of Contents
Asepsis 21 Duo / Assistant’s
Housing Components
40
NOTE: All painted/plastic
components on this page
are Pebble Grey
SECTION VI
PARTS LIST
1
39
34
37
33
37
32
38
2
41
3
35
31
36
42
29
30
5
4
6
26
6
43
25
45
27
28
44
7
22
24
6
23
21
16
20
8
8
19
15
9
13
12
18
17
10
14
11
6
46
DA158901i
Applies to units with serial numbers PM1508 & PL1572 thru V596886
Item
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
122357
153025
121015-50
149730
029-2904-50
153073
120178
120170-50
137258
120388
029-2449-01
15
16
117558
152070
17
18
19
20
21
22
23
• 053-2353-00
• 121547
• 120933
• 120932
• 120934-6
• 117349
121016-50
Description
Qty
Refer to “Asepsis 21 Duo/Assistant’s
Top Components”) ...........................Ref
Keps Lock Nut ....................................... 9
Adhesive Backing (Included w/ item 4).. 1
Power Pack............................................ 1
Side Panel (Right) ................................. 1
Thumbscrew .......................................... 6
Front Cover............................................ 1
3-way Toggle (Includes hardware)......... 1
Set Screw .............................................. 1
Knob ...................................................... 1
Poly Quick Water Disconnect (Female) . 1
Nut ....................................................... 1
Needle Valve ......................................... 1
Refer to “Cart Assembly Base
Components”) ..................................Ref
Screw .................................................... 2
Air / Oil Separator
(Includes items 18 thru 22) ................. 1
• Bottle................................................... 1
• Gauze Sponge .................................... 7
• Diffuser ............................................... 1
• Manifold .............................................. 1
• Cap ..................................................... 1
• Fitting .................................................. 3
Side Panel (Left).................................... 1
Item
Part No.
Description
24
25
26
27
28
29
30
31
32a
32b
33
34
35
36
37
38
39
40
41
42
002-0777-00
002-1813-00
120391-50
P9216
120199
P15280
118917
002-1805-00
118613
002-10259-00
118614
057-0831-50
151785-50
121033-50
145756
120392-50
121011-50
120372
120725
152138
Bottle (1 liter) .........................................1
Cap Assembly........................................1
Support Bracket .....................................1
Screw .....................................................2
Screw .....................................................2
Cap Plug ................................................1
Cap Plug (Earlier Units Only).................1
Housing Kit ............................................1
Basket ....................................................1
Basket bulk kit...................................... 50
O-ring .....................................................1
Cover .....................................................1
Screw .....................................................2
Rear Cover............................................1
Regulator ...............................................1
Regulator Mounting Bracket ..................1
Top Cover...............................................1
Screw, socket head (#10-32x1/2") .........4
Transformer............................................1
Valve Block Assembly (For parts
breakdown refer to “Valve Block
Assembly Components”) ................. Ref
Valve Mounting Block.............................2
Plug........................................................3
Bottom Panel .........................................1
Poly Quick Water Disconnect (Male) .....1
43
44
45
46
121065-2
120236-50
121012-50
137259
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/6/18
Page 6-40.3
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Asepsis 21 Duo / Assistant’s
Housing Components
NOTE: All painted/plastic
components on this page
are Pebble Grey
1
26
38
33
36
32
36
31
37
2
39
3
34
30
5
4
35
28
40
29
25
6
6
41
24
27
43
42
7
21
23
6
22
20
15
19
8
8
18
9
13
16
10
12
17
14
11
6
44
DA158901i
Applies to units with serial numbers V596887 thru Present
Item
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
122357
153025
121015-50
149730
029-2904-50
153073
120178
120170-50
137258
120388
029-2449-01
15
152070
16
17
18
19
20
21
22
23
• 053-2353-00
• 121547
• 120933
• 120932
• 120934-6
• 117349
121016-50
002-0777-00
Description
Qty
Refer to “Asepsis 21 Duo/Assistant’s
Top Components”) ...........................Ref
Keps Lock Nut ....................................... 9
Adhesive Backing (Included w/ item 4).. 1
Power Pack............................................ 1
Side Panel (Right) ................................. 1
Thumbscrew .......................................... 6
Front Cover............................................ 1
3-way Toggle (Includes hardware)......... 1
Set Screw .............................................. 1
Knob ...................................................... 1
Poly Quick Water Disconnect (Female) . 1
Nut ....................................................... 1
Needle Valve ......................................... 1
Refer to “Cart Assembly Base
Components”) ..................................Ref
Air / Oil Separator
(Includes items 16 thru 21) ................. 1
• Bottle (2 oz.) ....................................... 1
• Gauze Sponge .................................... 7
• Diffuser ............................................... 1
• Manifold .............................................. 1
• Cap ..................................................... 1
• Fitting .................................................. 3
Side Panel (Left).................................... 1
Bottle (1 liter) ......................................... 1
Item
Part No.
Description
Qty
24
25
26
27
28
29
30
31a
31b
32
33
34
35
36
37
38
39
40
002-1813-00
120391-50
120372
120199
P15280
118917
002-1805-00
118613
002-10259-00
118614
057-0831-50
151785-00
121033-50
145756
120392-50
121011-50
120725
029-4622-00
41
029-4624-00
42
43
44
120236-50
121012-50
137259
Cap Assembly........................................1
Support Bracket .....................................1
Screw, socket head (#10-32 x 1/2") .......4
Screw .....................................................2
Cap Plug ................................................1
Cap Plug (Earlier Units Only).................1
Housing Kit ............................................1
Basket ....................................................1
Basket bulk kit...................................... 50
O-ring .....................................................1
Cover ...................................................1
Screw .....................................................2
Rear Cover............................................1
Regulator ...............................................1
Regulator Mounting Bracket ..................1
Top Cover...............................................1
Transformer............................................1
Air Control Assembly (For parts
breakdown refer to “Air Control
Assembly Components”) .....................1
Water Control Assembly (For parts
breakdown refer to “Water Control
Assembly Components”) .....................1
Plug........................................................3
Bottom Panel .........................................1
Poly Quick Water Disconnect (Male) .....1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/6/18
Page 6-40.4
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Mobile Work Surface Top
Components
1
2
3
6
4
5
AF211300
Applies to units with “UA”& “UK” serial number prefixes
Item
1
2
3
4
Part No.
Description
063-9942-00
121077
121070-2
106657
Cart Top................................................. 1
Screw .................................................... 6
Block...................................................... 1
Screw .................................................... 1
Qty
Item
Part No.
Description
152465-50
Refer to “Cart Assembly Base
Components”).................................. Ref
Support Weldment .................................1
5
6
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/11
Page 6-41
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Mobile Work Surface Top
Components
1
2
3
6
4
5
NOTE: All painted/plastic
components on this page
are Pebble Grey
AF211300
Applies to units with “PM” & “V” serial number prefix
Item
1
2
3
4
Part No.
Description
Qty
063-9942-00
121077
121070-2
106657
Cart Top................................................. 1
Screw .................................................... 6
Block...................................................... 1
Screw .................................................... 1
Item
Part No.
Description
152465-50
Refer to “Cart Assembly Base
Components”).................................. Ref
Support Weldment .................................1
5
6
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/08
Page 6-41.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Cart Assembly Base
Components
Used on Asepsis 21 Doctor’s
Cart and Asepsis 21 Hygienist’s Cart
1
Used on Asepsis 21 Duo Cart,
Assistant’s Cart, and Mobile
Work Surface
3
4
2
5
8
7
Serial Number
Prefix
Color
UA, UK
sterling grey
PM
pebble grey
6
AF210900
Item
1
2
3
4
5
6
7
Part No.
Description
Qty
121063-2
Support Tube ......................................... 1
(N.L.A.)
Collar (sterling grey) ............................ 1
121234-50
Collar (pebble grey) ............................. 1
106753
Set Screw .............................................. 2
152185
Support Tube ......................................... 1
119759
Knob ...................................................... 1
016-1285-00-216 Caster ................................................. 4
061-0945-00
Caution Label ........................................ 2
Item
Part No.
8
(N.L.A.)
152118-50
(N.L.A.)
151766-50
Description
Qty
Base Weldment (Duo Cart, Assistant’s
Cart, & Mobile Work Surface)
(sterling grey)1
(pebble grey)......................................1
Base Weldment (Doctor’s Cart, &
Hygienist’s Cart)
(sterling grey)1
(pebble grey)......................................1
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 3/10
Page 6-42
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Duo Arm Assembly
(Adjustable)
KA924700
Applies to units with “UA” & “UC” serial number prefixes
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Part No.
Description
121452-50
121451-50
112659
121488
121471
121488
121450-50
121438-2
121454
121439
121447
121481
120950
121480
120612
122820-50
121475
121437-50
121459
152419-50
121445
117086
121435-50
121458
121489
Rear Pivot Pin........................................ 1
Back Plate.............................................. 1
Screw..................................................... 4
Set Screw .............................................. 6
Arm Stop................................................ 2
Set Screw .............................................. 2
Mounting Plate....................................... 2
Support Pin............................................ 4
Retaining Ring ....................................... 8
Pivot Pin................................................. 2
Bearing .................................................. 4
Screw Base............................................ 6
Screw..................................................... 6
Screw Cover .......................................... 6
Screw..................................................... 4
Duo Arm Cover ...................................... 1
Umbilical Bearing................................... 2
Support Rod .......................................... 2
Spring Tube Liner................................... 1
Spring Tube Assembly ........................... 1
Spring Tube Bushing.............................. 1
Bearing .................................................. 2
Rear Pivot .............................................. 1
Arm Cover.............................................. 2
Screw..................................................... 4
Qty
Item
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Part No.
Description
121486
121442-2
152418-50
121449
120274
121455
121485-2
121441
122161
121576-50
107995
121482
121395-50
121448
121434-50
121436-2
152435
• 121476
• 121477
• 121484
• 177552
117479
109714
117660
117481
Set Screw .............................................. 1
Spring Rod ............................................ 1
Arm Housing ......................................... 1
Spring .................................................... 1
Washer .................................................. 1
Nut......................................................... 1
Brake Shoe............................................ 1
Brake Rod ............................................. 1
Set Screw .............................................. 1
Hole Plug............................................... 1
Screw .................................................... 1
Set Screw .............................................. 2
Bearing Hub .......................................... 1
Bearing.................................................. 1
Front Pivot ............................................. 1
Brake Cylinder....................................... 1
Brake Piston Assembly ......................... 1
• Brake Piston ....................................... 1
• Piston Plunger .................................... 1
• O-Ring ................................................ 1
• Tubing, Green ..................................... 1
Uni-Clamp, 1/8” O.D. ............................. 2
Fitting .................................................... 1
Gasket ................................................... 2
Fitting .................................................... 1
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/01
Page 6-43
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Duo Arm Assembly
(Adjustable)
NOTE: All painted/plastic
components on this page
are Pebble Grey
KA924700
Applies to units with “PJ”, “PM” & “V” serial number prefix
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Part No.
Description
121452-50
121451-50
112659
121488
121471
121488
121450-50
121438-2
121454
121439
121447
121481
120950
121480-01
120612
122820-50
121475
121437-50
121459
152419-50
121445
117086
121435-50
121458-01
121489
Rear Pivot Pin........................................ 1
Back Plate.............................................. 1
Screw..................................................... 4
Set Screw .............................................. 6
Arm Stop................................................ 2
Set Screw .............................................. 2
Mounting Plate....................................... 2
Support Pin............................................ 4
Retaining Ring ....................................... 8
Pivot Pin................................................. 2
Bearing .................................................. 4
Screw Base............................................ 6
Screw..................................................... 6
Screw Cover .......................................... 6
Screw..................................................... 4
Duo Arm Cover ...................................... 1
Umbilical Bearing................................... 2
Support Rod .......................................... 2
Spring Tube Liner................................... 1
Spring Tube Assembly ........................... 1
Spring Tube Bushing.............................. 1
Bearing .................................................. 2
Rear Pivot .............................................. 1
Arm Cover.............................................. 2
Screw..................................................... 4
Qty
Item
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Part No.
Description
121486
121442-2
152418-50
121449
120274
121455
121485-2
121441
122161
121576-50
107995
121482
121395-50
121448
121434-50
121436-2
152435
• 121476
• 121477
• 121484
• 177552
117479
109714
117660
117481
Set Screw .............................................. 1
Spring Rod ............................................ 1
Arm Housing ......................................... 1
Spring .................................................... 1
Washer .................................................. 1
Nut......................................................... 1
Brake Shoe............................................ 1
Brake Rod ............................................. 1
Set Screw .............................................. 1
Hole Plug............................................... 1
Screw .................................................... 1
Set Screw .............................................. 2
Bearing Hub .......................................... 1
Bearing.................................................. 1
Front Pivot ............................................. 1
Brake Cylinder....................................... 1
Brake Piston Assembly ......................... 1
• Brake Piston ....................................... 1
• Piston Plunger .................................... 1
• O-Ring ................................................ 1
• Tubing, Green ..................................... 1
Uni-Clamp, 1/8” O.D. ............................. 2
Fitting .................................................... 1
Gasket ................................................... 2
Fitting .................................................... 1
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/04
Page 6-43.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Duo Arm Pivot Joint Assembly
1
19
18
17
16
2
15
3
14
8
4
5
9
13
5
6
11
7
10
12
Serial Number
Prefix
Color
UA, UC
sterling grey
PJ, PM
pebble grey
Item
1
2
3
4
5
6
7
8
9
KA924800
Part No.
Description
Qty
(N.L.A.)
121472-50
117519
(N.L.A.)
121408-50
(N.L.A.)
121479-01
117407-2
(N.L.A.)
122099-50
(N.L.A.)
121980-50
122098-2
121972
Hole Plug (sterling grey) ...................... 1
Hole Plug (pebble grey)........................ 1
Screw..................................................... 1
Duo Hub (sterling grey)........................ 1
Duo Hub (pebble grey) ......................... 1
Washer (sterling grey).......................... 1
Washer (pebble grey) ........................... 1
Plate Nut, Post ....................................... 2
Fixed Arm Cover (sterling grey) ........... 1
Fixed Arm Cover (pebble grey) ............ 1
Screw (sterling grey)............................ 2
Screw (pebble grey) ............................. 2
Cover Mount .......................................... 2
U-Fastener ............................................. 2
Item
10
11
12
13
14
15
16
17
18
19
Part No.
Description
Qty
(N.L.A.)
121391-50
121577
(N.L.A.)
121576-50
121482
121506
121390
(N.L.A.)
121419-01
122161
(N.L.A.)
121394-50
121393-2
Bearing Hub (sterling grey) ................. 1
Bearing Hub (pebble grey)................... 1
Screw .................................................... 1
Hole Plug (sterling grey)...................... 1
Hole Plug (pebble grey) ....................... 1
Set Screw .............................................. 1
Dowel Pin .............................................. 1
Bearing.................................................. 1
Washer (sterling grey) ......................... 1
Washer (pebble grey)........................... 1
Set Screw .............................................. 2
Duo Unit Collar (sterling grey) ............. 1
Duo Unit Collar (pebble grey) .............. 1
Chrome Plated Tube Support................ 1
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-44
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Duo Unit Wall Mount Kit
1
2
3
4
5
6
7
8
9
10
AF21370
Item
1
2
3
4
5
Part No.
Description
(N.L.A.)
152469-50
(N.L.A.)
120233-50
Wall Mount Frame (sterling grey) ........ 1
Wall Mount Frame (pebble grey).......... 1
Panel Screw (sterling grey) ................. 4
Panel Screw (pebble grey)................... 4
Refer to “Duo Arm Assembly” ............ Ref
Washer .................................................. 8
Screw .................................................... 8
106202
101317
Qty
Item
6
7
8
9
10
Part No.
Description
Qty
(N.L.A.)
121646-01
(N.L.A.)
121502-50
121488
C2563
108850
LH Wall Mount Cover (sterling grey) .... 1
LH Wall Mount Cover (sterling grey) .... 1
Arm Support Plate (sterling grey) ........ 1
Arm Support Plate (pebble grey).......... 1
Set Screw .............................................. 4
Lock Washer .......................................... 4
Screw ..................................................... 4
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-45
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Duo Unit Cabinet Mount Kit
1
2
7
3
4
6
5
Serial Number
Prefix
Paint
Color
UA, UC
sterling grey
PJ
pebble grey
AF214100
Item
1
2
3
Part No.
Description
(N.L.A.)
121501-50
(N.L.A.)
121502-50
Backing Plate (sterling grey) ................ 1
Backing Plate (pebble grey) ................. 1
Arm Support Plate (sterling grey) ........ 1
Arm Support Plate (pebble grey).......... 1
Refer To “Duo Arm Assembly” ........... Ref
Qty
Item
4
5
6
7
Part No.
Description
121488
155463
121124
(N.L.A.)
151782-50
Set Screw .............................................. 4
Washer .................................................. 4
Screw .................................................... 4
Screw (sterling grey) ........................... 2
Screw (pebble grey) ............................. 2
Qty
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-46
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Side Delivery Unit
Wall Mount Components
15
1
2
3
4
5
6
12
14
11
13
10
Serial Number
Prefix
Paint
Color
UA, UC
sterling grey
PJ
pebble grey
9
7
8
AF213600
Item
1
2
3
4
5
6
Part No.
Description
Qty
(N.L.A.)
152469-50
(N.L.A.)
121647-01
(N.L.A.)
120233-50
(N.L.A.)
149959-01
(N.L.A.)
118118-50
(N.L.A.)
120236-50
Frame (sterling grey)............................ 1
Frame (pebble grey) ............................. 1
Frame Cover (sterling grey) ................. 1
Frame Cover (pebble grey)................... 1
Screw (sterling grey)............................ 4
Screw (pebble grey) ............................. 4
Bearing Assembly (sterling grey)......... 1
Bearing Assembly (pebble grey) .......... 1
Bearing Cover (sterling grey) ............... 1
Bearing Cover (pebble grey) ................ 1
1/2” Plug Button (sterling grey) ........... 4
1/2” Plug Button (pebble grey) ............ 4
Item
7
8
9
10
11
12
13
14
15
Part No.
Description
Qty
149729
(N.L.A.)
120227-50
C4522
(N.L.A.)
120794-50
108850
C2563
101317
106202
Knob ...................................................... 1
3/4” Plug Button (sterling grey) ........... 2
3/4” Plug Button (pebble grey) ............ 2
Screw .................................................... 2
Strain Relief Bracket (sterling grey)..... 1
Strain Relief Bracket (pebble grey) ...... 1
Hex Screw ............................................. 4
Lockwasher ........................................... 6
Lag Screw ............................................. 8
Washer .................................................. 8
Refer to “ Fixed Arm Assembly” ......... Ref
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-47
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Side Delivery Unit
Cabinet Mount Components
1
2
3
4
5
11
10
9
8
6
7
Serial Number
Prefix
Paint
Color
UA, UC
sterling grey
PJ
pebble grey
Item
1
2
3
4
5
AF213800
Part No.
Description
(N.L.A.)
121501-50
Backing Plate (sterling grey) ................ 1
Backing Plate (pebble grey) ................. 1
Refer to “Fixed Arm Assembly”)......... Ref
Bearing Assembly (sterling grey)......... 1
Bearing Assembly (pebble grey) .......... 1
Bearing Cover (sterling grey) ............... 1
Bearing Cover (pebble grey) ................ 1
1/2” Plug Button (sterling grey) ............ 4
1/2” Plug Button (pebble grey) ............. 4
(N.L.A.)
149959-01
(N.L.A.)
118118-50
(N.L.A.)
120236-50
Qty
Item
6
7
8
9
10
11
Part No.
Description
Qty
149729
(N.L.A.)
120227-50
C4522
(N.L.A.)
120794-50
108850
C2563
Knob ...................................................... 1
3/4” Plug Button (sterling grey)............ 2
3/4” Plug Button (pebble grey) ............. 2
Screw .................................................... 2
Strain Relief Bracket (sterling grey)..... 1
Strain Relief Bracket (pebble grey) ...... 1
Hex Screw ............................................. 4
Lockwasher ........................................... 4
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-48
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Rear Delivery Unit
Cabinet Mount Components
1
2
3
4
5
6
11
7
8
AS
EP
SIS
9
21
6
111
5
6
10
Serial Number
Prefix
Paint
Color
UA, UC
sterling grey
PJ
pebble grey
AF213500
Item
1
2
3
4
5
6
Part No.
Description
P12577
(N.L.A.)
121487-50
(N.L.A.)
121200-50
121074
121072
121073
Screw..................................................... 4
Mounting Plate (sterling) ...................... 1
Mounting Plate (pebble)........................ 1
Spacer (sterling) ................................... 1
Spacer (pebble) .................................... 1
Race Bearing ......................................... 1
Thrust Bearing ....................................... 2
Race Bearing ......................................... 3
Qty
Item
7
8
9
10
11
Part No.
Description
(N.L.A.)
121604-50
(N.L.A.)
120881-50
(N.L.A.)
121067-50
121071-2
Screw (sterling) .................................... 2
Screw (pebble) ..................................... 2
End Cap (sterling)................................ 1
End Cap (pebble) ................................. 1
Bottom Cover (sterling) ........................ 1
Bottom Cover (pebble) ......................... 1
Stud ....................................................... 1
Refer to "Asepsis 21 Delivery Unit”) ...Ref
Qty
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-49
Printed in U.S.A.
Return To Table Of Contents
Square Air Lock Flex
Arm Assembly
SECTION VI
PARTS LIST
1
30
31
38
37
2
32
35
33
34
35
36
21
43
44
46
23
4
20
47
5
22
42
40
25
45
3
39
41
28
27
15
14
19
16
14 17 18
13
29
6
24
26
7
12
11
8
10
7
9
AF208100
Applies to units with “UA”, “UC”, “UK”, & “UW” serial number prefixes
Item
Part No.
Description
Qty
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
120866-50
120868-50
117807
C5176
117406-3
117405-3
117401-3
117635
117637
121508-50
120867-50
117410
149500-2
117703
118154-3
156253
117558
117577
149501-2
149498-2
149587-2
117418
117744
117612-2
117509
Flex Arm Cover ......................................1
Flex Arm Bottom Cover ..........................1
Set Screw (Cone Point)..........................1
Set Screw (Flat Point) ............................1
Pin ........................................................1
Pin ........................................................1
Pin ........................................................2
Mount Assembly Cover - Fixed ..............1
Mount Assembly Cover - Movable..........1
Screw .....................................................1
Flex Arm End Cap..................................1
Sleeve ....................................................1
Flex Arm Mount Assembly - Movable.....1
Set Screw (Cone Point)..........................4
Pin ........................................................1
Retaining Ring........................................2
Screw .....................................................2
Latch Block.............................................1
Flex Arm Tube Assembly .......................1
Flex Arm Mount Assembly - Fixed .........1
Link Assembly ........................................1
Aligning Washer .....................................1
Friction Pad ............................................2
Sleeve ....................................................1
Compression Spring...............................1
Item
Part No.
Description
26
27
28
29
115837
C1079
117436-2
002-1867-00
30
31
32
33
34
35
36
37
38
39
40
41
42
43
• 118069-2
• 121506
• 117409-2
• 117510
• 118072
• 117660
• 113295
• 109714
• P11836
103205
117479
118073•
118100
117576-2
117575-2
118154-3
C5082
118070-2
118071-2
P11777
Washer .................................................. 1
Nut ....................................................... 1
Spring Rod............................................. 1
Air Cylinder Assembly
(Includes items 30 thru 38).................. 1
• Pawl Mount.......................................... 1
• Dowel Pin ............................................ 1
• Air Cylinder Pin ................................... 1
• Air Cylinder.......................................... 1
• Air Cylinder Mount............................... 1
• Gasket................................................. 2
• Elbow Fitting........................................ 1
• Barbed Fitting...................................... 1
• Set Screw ............................................ 1
Screw..................................................... 4
Uni-Clamp.............................................. 1
Stop Plate .............................................. 1
Screw..................................................... 2
Lock Pawl - Right ................................... 1
Lock Pawl - Left ..................................... 1
Pin ......................................................... 1
Retaining Ring ....................................... 2
Pawl Pivot Bracket - Right (shown) ........ 1
Pawl Pivot Bracket - Left (not shown) .... 1
Washer .................................................. 4
44
45
46
47
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 9/12/14
Page 6-50
Printed in U.S.A.
Return To Table Of Contents
Square Air Lock Flex
Arm Assembly
SECTION VI
PARTS LIST
1
30
31
38
37
2
32
35
33
34
36
35
21
43
44
25
45
46
4
20
47
5
22
42
39
41
40
3
23
28
27
15
14
19
16
14 17 18
13
29
6
24
26
7
12
11
8
10
7
9
NOTE: All painted/plastic
components on this page
are Pebble Grey
AF208100
Applies to units w/ serial numbers PJ1000 thru PJ1869 & PK1000 thru PK1041
Item
Part No.
Description
Qty
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
120866-50
120868-50
117807
C5176
117406-3
117405-3
117401-3
117635-01
117637-01
121508-50
120867-50
117410
149500-2
117703
118154-3
156253
117558
117577
149501-2
149498-2
149587-2
117418
117744
117612-2
117509
Flex Arm Cover ......................................1
Flex Arm Bottom Cover ..........................1
Set Screw (Cone Point)..........................1
Set Screw (Flat Point) ............................1
Pin ........................................................1
Pin ........................................................1
Pin ........................................................2
Mount Assembly Cover - Fixed ..............1
Mount Assembly Cover - Movable..........1
Screw .....................................................1
Flex Arm End Cap..................................1
Sleeve ....................................................1
Flex Arm Mount Assembly - Movable.....1
Set Screw (Cone Point)..........................4
Pin ........................................................1
Retaining Ring........................................2
Screw .....................................................2
Latch Block.............................................1
Flex Arm Tube Assembly .......................1
Flex Arm Mount Assembly - Fixed .........1
Link Assembly ........................................1
Aligning Washer .....................................1
Friction Pad ............................................2
Sleeve ....................................................1
Compression Spring...............................1
Item
Part No.
Description
26
27
28
29
115837
C1079
117436-2
002-1867-00
30
31
32
33
34
35
36
37
38
39
40
41
42
43
• 118069-2
• 121506
• 117409-2
• 117510
• 118072
• 117660
• 113295
• 109714
• P11836
103205
117479
118073•
118100
117576-2
117575-2
118154-3
C5082
118070-2
118071-2
P11777
Washer .................................................. 1
Nut ....................................................... 1
Spring Rod............................................. 1
Air Cylinder Assembly
(Includes items 30 thru 38).................. 1
• Pawl Mount.......................................... 1
• Dowel Pin ............................................ 1
• Air Cylinder Pin ................................... 1
• Air Cylinder.......................................... 1
• Air Cylinder Mount............................... 1
• Gasket................................................. 2
• Elbow Fitting........................................ 1
• Barbed Fitting...................................... 1
• Set Screw ............................................ 1
Screw..................................................... 4
Uni-Clamp.............................................. 1
Stop Plate .............................................. 1
Screw..................................................... 2
Lock Pawl - Right ................................... 1
Lock Pawl - Left ..................................... 1
Pin ......................................................... 1
Retaining Ring ....................................... 2
Pawl Pivot Bracket - Right (shown) ........ 1
Pawl Pivot Bracket - Left (not shown) .... 1
Washer .................................................. 4
44
45
46
47
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 9/12/14
Page 6-50.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Oval Air Lock Flex Arm
2
1
Assembly
3
43
45
44
2
6
4
23
7
40
10
5
37
42
11
8
3
9
25
46
5
41
10
12
4
24
36
31
19
13 14
33
15
34
2
20
21 47
3
27
16
18
2
39
40
17
32
22
35
38
31
24
29
NOTE: All painted/plastic
components on this page
are Pebble Grey
30
28
27
26
KA992503i
Applies to units w/ serial numbers PJ1870 & PK1042 thru Present
Applies to units w/ serial numbers V2200 thru Present
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Part No.
Description
Qty
029-2428-00
• 052-0357-50
• 042-0065-00
• 016-1570-02
• 057-0618-00
• 016-1569-01
• 030-1245-00
• 117418
• 040-0010-87
• 053-1187-00
• 117744
• 117612-2
• 025-0070-00
• 045-0001-107
• 041-0500-04
• 052-0358-50
• 117576-2
• 117575-2
• 118154-3
• 042-0065-00
• 118070-2
• 118071-2
• 103205
• 118100
• 118073-2
• 057-0644-00
Flex Arm Assy (Inc. Items 1 thru 39) ..... 1
• Flex Arm Fixed Mount......................... 1
• Klipring................................................ 4
• Flange Bearing ................................... 4
• Clevis Pin ............................................ 2
• Bushing ............................................... 6
• Spring Link Assembly ......................... 1
• Aligning Washer.................................. 1
• Bolt...................................................... 2
• Screw Base Cover .............................. 2
• Friction Pad ......................................... 2
• Friction Washer Sleeve ....................... 1
• Compression Spring ........................... 1
• Washer................................................ 1
• Nut ...................................................... 1
• Flex Arm Mount .................................. 1
• Lock Pawl (Right Side)........................ 1
• Lock Pawl (Left Side) .......................... 1
• Latch Pawl Pivot Pin ........................... 1
• Klipring................................................ 2
• Pawl Pivot Bracket (Right Side shown)1
• Pawl Pivot Bracket (Left Side)............. 1
• Screw .................................................. 4
• Screw .................................................. 2
• Stop Plate ........................................... 1
• Flex Arm Spring Spacer...................... 2
Item
Part No.
Description
Qty
24
• 002-1021-00
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
• 109714
• 053-1179-00
• 040-0006-99
• 021-0038-50
• 042-0056-04
• 021-0039-50
• 057-0608-00
• 053-1218-00
• 040-0010-98
• 117577
• 030-1250-50
• 051-0906-00
• 057-0620-00
• 002-1867-00
• • 113295
• • 117660
• • 118072
• • 117510
• • 117409-2
• • 121506
• • 118069-2
• • P11836
117479
• End Cap Assembly
(includes mtg. bracket & nutsert)........2
• Barbed Fitting ......................................1
• Thrust Washer .....................................1
• #6-32 x 1/2 Pan Head Phillips .............2
• Flex Arm Cover....................................1
• External Retaining Ring.......................1
• Flex Arm Extrusion ..............................1
• Flex Arm Pivot Pin ...............................2
• Joint Cover ..........................................1
• Screw ..................................................2
• Latch Block ..........................................1
• Flex Arm Tube Assembly.....................1
• Spring Rod .........................................1
• Knurled Pivot Pin .................................1
• Air Cyl. Assy. (incl. items 40 thru 47)...2
• • Elbow Fitting .....................................1
• • Gasket...............................................2
• • Air Cylinder Mount ............................1
• • Air Cylinder .......................................1
• • Air Cylinder Pin .................................1
• • Dowel Pin..........................................1
• • Pawl Mount .......................................1
• • Set Screw..........................................1
Uni-Clamp ..............................................1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/13/15
Page 6-50.2
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Manual Lock Flex Arm Assembly
1
2
3
4
32
5
26
25
28
29
30
31
27
20
18
17
21
19
16
24
15
8
UA, UC, UK, UW
sterling grey
PJ, PK
pebble grey
9
23
13
Paint
Color
7
17
14
Serial Number
Prefix
6
22
10
8
11
12
7
AF208500
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Part No.
Description
(N.L.A.)
121064-50
(N.L.A.)
121087-50
117807
C5176
117406-3
117405-3
117401-3
275479
(N.L.A.)
117635-01
(N.L.A.)
121086-50
106202
(N.L.A.)
117637-01
(N.L.A.)
121508-50
(N.L.A.)
120867-50
117410
Flex Arm Cover (sterling) ..................... 1
Flex Arm Cover (pebble)....................... 1
Flex Arm Bottom Cover (sterling) ......... 1
Flex Arm Bottom Cover (pebble) .......... 1
Set Screw (Cone Point) ......................... 1
Set Screw (Flat Point)............................ 1
Spring Rod Pin ...................................... 1
Link Assembly Pin ................................. 1
Tube Pin ................................................ 2
Weatherstrip ................................. 0.18 ft.
Fixed Mount Cover (sterling) ............... 1
Fixed Mount Cover (pebble) ................ 1
Friction Knob (sterling) ......................... 1
Friction Knob (pebble) .......................... 1
Washer .................................................. 1
Movable Mount Cover (sterling) ........... 1
Movable Mount Cover (pebble)............. 1
Screw (sterling) .................................... 1
Screw (pebble)...................................... 1
Flex Arm End Cap (sterling)................. 1
Flex Arm End Cap (pebble) .................. 1
Sleeve.................................................... 1
Qty
Item
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Part No.
Description
149500-2
117703
118154-3
156253
121125
121085
120154
(N.L.A.)
152152-50
149498-2
(N.L.A.)
149957-50
117418
117744
117612-2
118110
115837
C1079
118025-2
185171
042-0024-00
Flex Arm Mount - Movable .....................1
Screw .....................................................4
Spring Rod Pin.......................................1
Retaining Ring .......................................2
Flex Arm Stop ........................................1
Friction Block..........................................1
Screw .....................................................1
Flex Arm Tube Assembly (sterling) .......1
Flex Arm Tube Assembly (pebble) ........1
Flex Arm Mount - Fixed..........................1
Spring Link Assembly (sterling) ............1
Spring Link Assembly (pebble) .............1
Aligning Washer .....................................1
Friction Pad ............................................2
Sleeve ....................................................1
Compression Spring ..............................1
Washer...................................................1
Nut .........................................................1
Rod Spring .............................................1
Magnalube (not shown) ......................AR
Loctite* 242 (not shown) .....................AR
Qty
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-51
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Delivery Unit Arm Assembly
1
2
3
4
5
7
6
8
9
10
11
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PL, PK
pebble grey
12
AF213200
Applies to all units with “UA”, “UC”, “UK”, & “UW” serial number prefixes
and units w/ serial numbers PJ1000 thru PJ1869 & PK1000 thru PK1041
Item
Part No.
Description
122308
121677-2
122348
122454-6
122350
Refer to:
“Air Lock Flex Arm Assembly” ......... Ref
“Manual Lock Flex Arm Assembly”.. Ref
Cover Washer ........................................ 1
Stop Washer .......................................... 1
Stop Pin ................................................. 1
Bearing .................................................. 1
Set Screw .............................................. 1
1
2
3
4
5
6
Qty
Item
7
8
9
10
11
12
Part No.
Description
(N.L.A.)
153105-50
(N.L.A.)
122338-50
122344
122337-2
122161
040-0006-74
Unit Arm (sterling)................................ 1
Unit Arm (pebble) ................................. 1
Trim Ring (sterling)............................... 1
Trim Ring (pebble) ................................ 1
O-ring .................................................... 1
Collar ..................................................... 1
Set Screw .............................................. 2
Screw .................................................... 2
Qty
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 4/14
Page 6-52
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Delivery Unit Arm Assembly
3
2
5
9
10
11
4
1
8
7
6
DA110600i
Applies to units w/serial numbers PJ1870 & PK1042 thru Present
Applies to units w/ serial numbers V2200 thru Present
Item
1
2
3
4
5
6
Part No.
Description
002-0903-03
• 016-0856-02
• 016-0837-00
040-0010-126
122348
122161
Unit Arm Kit (includes items 2 & 3) ........ 1
• Needle Bearing ................................... 2
• Bearing Sleeve .................................... 1
Set Screw............................................... 2
Dowel Pin............................................... 4
Set Screw............................................... 2
Qty
Item
7
8
9
10
11
Part No.
Description
122337-2
053-1221-01
Collar ..................................................... 1
Trim Ring ............................................... 1
Serial Number Label / Laminate............ 1
ETL Label .............................................. 1
Type B Label.......................................... 1
061-0894-00
061-0652-00
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 3/10
Page 6-52.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
SLC Unit Mounting Components
2
1
AS
EP
SIS
21
111
3
5
6
4
7
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK
pebble grey
8
9
AF212300
Item
Part No.
Description
152597
152597-01
Refer to:
“Asepsis 21 Delivery Unit Assy” ...... Ref
“Whip-style Delivery Unit Assy” ....... Ref
Refer to:
“Air Lock Flex Arm Assembly” ......... Ref
“Manual Lock Flex Arm Assembly”.. Ref
Refer to “Fixed Arm Assembly” .......... Ref
Unit Mounting Post Assy.
(Includes items 5 thru 7)
(sterling) ............................................. 1
(pebble) .............................................. 1
1
2
3
4
Qty
Item
5
6
7
Part No.
Description
•
•
•
•
•
• Sleeve Bearing.................................... 1
• Mounting Post (sterling)..................... 1
• Mounting Post (pebble) ...................... 1
• Hole Plug (sterling) ............................ 1
• Hole Plug (pebble) ............................. 1
Refer to Console Mounting Bracket
(specify chair model)........................Ref
Set Screw (Apply Loctite* 242).............. 8
117506
(N.L.A.)
121862-50
(N.L.A.)
120236-50
8
9
121795
Qty
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-53
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Fixed Arm Assembly
2
1
3
4
12
5
13
6
11
10
9
8
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL, PM
pebble grey
7
AF213100
Item
1
2
3
4
5
Part No.
Description
(N.L.A.)
121709-50
117519
Hub (sterling)........................................ 1
Hub (pebble) ......................................... 1
Socket Head Screw ............................... 1
Cap (Apply adhesive #064-0026-00)
(sterling)............................................. 1
(pebble) .............................................. 1
Nylon Washer ........................................ 1
Fixed Arm [27.0 in. (68.6 cm)]
(sterling)............................................. 1
(pebble) .............................................. 1
Fixed Arm [12.0 in. (30.5 cm)]
(sterling)............................................. 1
(pebble) .............................................. 1
Nut Post Plate ........................................ 1
(N.L.A.)
122198-50
121711
(N.L.A.)
121783-50
6
(N.L.A.)
122375-50
117407-2
Qty
Item
Part No.
7
(N.L.A.)
121707-50
8
9
10
11
12
13
14
(N.L.A.)
122374-50
110065
(N.L.A.)
120871-50
(N.L.A.)
121508-50
117505
121677-2
040-0250-07
152184
Description
Qty
Fixed Arm Cover [27.0 in. (68.6 cm)]
(sterling) ............................................ 1
(pebble).............................................. 1
Fixed Arm Cover [12.0 in. (30.5 cm)]
(sterling) ............................................ 1
(pebble).............................................. 1
Retaining Ring....................................... 1
End Cap (sterling)................................ 1
End Cap (pebble) ................................. 1
Oval Head Screw (sterling) .................. 1
Oval Head Screw (pebble) ................... 1
Bearing.................................................. 1
Stop Washer.......................................... 1
Stop Rotation Screw (1/4"-20 x 1/2")..... 1
Bumper Kit (not shown- incl. 4 pcs.)...... 1
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 7/11
Page 6-54
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Unit Arm Assembly
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK
pebble grey
1
2
LR Asepsis 21 or Procenter Unit Arms
4
6
23
5
3
7
9
37
24
34
8
10
38
12
13
20
26
35
21
25 27
18
36
26
19
25
17
14
11
28
15
33
22
31
16
32
30
29
KA922902i
Applies to all units with “UA”, “UC”, “UK”, & “UW” serial number prefixes
and units w/ serial numbers PJ1000 thru PJ1869 & PK1000 thru PK1041
Item
1
2
3
Part No.
Description
(N.L.A.)
122308-50
121677-2
Cover Washer (sterling .........................1
Cover Washer (pebble) .........................1
Stop Washer ..........................................1
Sleeve / Bearing Assy (incl. items 4 & 5)
(sterling) .............................................1
(pebble)...............................................1
• Sleeve Bearing (apply green Loctite*) .1
• Unit Arm Sleeve (sterling) ..................1
• Unit Arm Sleeve (pebble)....................1
Rotation Stop Pin ...................................1
Set Screw...............................................1
Superflex Pin ..........................................1
Water Bottle Cover (sterling).................1
Water Bottle Cover (pebble) ..................1
Logo .......................................................2
Bottle Cap Assy
(includes items 12 thru 15 & tubing) ....1
• Barb Fitting ..........................................2
• Bottle Cap ............................................1
• Barb Fitting ..........................................1
• O-Ring .................................................1
Unit Arm Assembly (sterling) ................1
Unit Arm Assembly (pebble)..................1
Screw .....................................................2
Water Bottle Bracket ..............................1
Screw .....................................................2
10
11
(N.L.A.)
153069-50
• 122454-6
• (N.L.A.)
• 122507-50
122348
122161
122584
(N.L.A.)
122535-50
121527
002-1813-00
12
13
14
15
16
• 117481
• 053-1463-00
• 117482
• 014-0176-52
(N.L.A.)
17
18
19
105480
122532-50
121964
4
5
6
7
8
9
Qty
Item
20
21
22
23
24
25
26
27
Part No.
Description
275184
002-1709-00
•
(N.L.A.)
122596-50
122560
119034
119033
122555
Foam Tape .......................................... AR
3-way Toggle (includes item 22) ............ 1
• Nut....................................................... 1
Unit Bolt Cover (sterling) ...................... 1
Unit Bolt Cover (pebble)........................ 1
Screw..................................................... 1
Thrust Bearing Race.............................. 6
Thrust Bearing ....................................... 3
Washer (Apply 275392 Adhesive
To Top Face of Washer) ...................... 1
Bottle Replacement Kit (1 liter) .............. 1
Bottle Replacement Kit (2.0 liter)
(Includes items 13 & 14) ..................... 1
Nut ......................................................... 1
Friction Bearing...................................... 3
Compression Spring .............................. 3
Set Screw .............................................. 3
Bolt Warning Label ................................ 1
Light Arm Bumper.................................. 1
Unit Arm Bumper ................................... 1
Screw..................................................... 1
Set Screw .............................................. 3
Lower Arm Mounting Bracket
(sterling)............................................. 1
(pebble) .............................................. 1
28
002-0777-00
153282
29
30
31
32
33
34
35
36
37
38
122553
122564
121997
122572
TPW1709
122550
122549
107995
122547
(N.L.A.)
153103-50
Qty
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 7/31/14
Page 6-55
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Unit Arm Assembly
NOTE: All painted/plastic
components on this page
are PebbleGrey
LR Asepsis 21 or Procenter Unit Arms
2
1
19
3
34
20
6
30
4
8
21
5
5
9
17
33
22
16
31
21 23
32
15
14
22
13
10
7
21
24
11
29
18
27
12
28
26
25
DA131301i
Applies to units w/serial numbers PJ1870 thru PJ2588 & PK1042 thru PK1096
Item
Part No.
Description
Qty
1
2
3
4
5
6
7
016-0856-02
016-0837-00
122535-01
122348
040-0010-126
061-0771-00
002-1813-00
8
9
10
11
12
13
14
15
16
17
18
19
• 117481
• 053-1463-00
• 117482
• 014-0176-52
002-0903-04
105480
122532-50
121964
275184
002-1709-00
•
122596-01
Needle Bearing ..................................... 2
Slotted Sleeve Bearing .......................... 1
Water Bottle Cover ................................ 1
Dowel Pin .............................................. 2
Set Screw .............................................. 2
Knight by Midmark Label....................... 2
Bottle Cap Assy
(includes items 8 thru 11 & tubing) ..... 1
• Barb Fitting ......................................... 2
• Bottle Cap ........................................... 1
• Barb Fitting ......................................... 1
• O-Ring ................................................ 1
Unit Arm Kit (includes items 1 & 2) ....... 1
Screw .................................................... 2
Water Bottle Bracket.............................. 1
Screw .................................................... 2
Foam Tape ......................................... AR
3-way Toggle (incl. item 18)................... 1
• Nut ...................................................... 1
Unit Bolt Cover ...................................... 1
Item
Part No.
Description
Qty
20
21
22
23
122560
119034
119033
122555
24
002-0777-00
153282
25
26
27
28
29
30
31
32
33
34
122553
122564
121997
122572
TPW1709
122550
122549
107995
153103-50
122547
Screw .....................................................1
Thrust Bearing Race..............................6
Thrust Bearing .......................................3
Washer [apply adhesive (#275392)
to top face of washer] ..........................1
Bottle Replacement Kit (1 liter) ..............1
Bottle Replacement Kit (2.0 liter)
(includes items 9 & 10)........................1
Nut .........................................................1
Friction Bearing......................................3
Compression Spring ..............................3
Set Screw...............................................3
Bolt Warning Label.................................1
Light Arm Bumper..................................1
Unit Arm Bumper ...................................1
Screw .....................................................1
Lower Arm Mounting Bracket.................1
Set Screw...............................................3
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 7/31/14
Page 6-55.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Unit Arm Assembly
NOTE: All painted/plastic
components
onorthis
page areUnit Arms
LR
Asepsis 21
Procenter
Pebble Grey
2
1
19
3
36
6
32
4
8
5
5
17
9
21
35
16
33
15
22
34
14
13
10
7
23
20
24
11
25
18
26
12
27
28
30
29
31
Applies to units w/serial numbers PJ2589 thru PJ3099 & PK1097 thru PK1119
Item
Part No.
Description
029-2859-00
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Qty
LR Unit Arm & Support Assembly
(includes items 1 thru 36)
• 016-0856-02 • Needle Bearing....................................2
• 016-0837-00 • Slotted Sleeve Bearing ........................1
• 122535-01
• Water Bottle Cover...............................1
• 122348
• Dowel Pin.............................................2
• 040-0010-126 • Set Screw ............................................2
• 061-0771-00 • Knight by Midmark Label .....................2
• 002-1813-00 • Bottle Cap Assy
(includes items 8 thru 11 & tubing) ......1
• • 117481
• • Barb Fitting........................................2
• • 053-1463-00 • • Bottle Cap .........................................1
• • 117482
• • Barb Fitting........................................1
• • 014-0176-52 • • O-Ring...............................................1
• 002-0903-04 • Unit Arm Kit (includes items 1 & 2)......1
• 105480
• Screw...................................................2
• 122532-50
• Water Bottle Bracket ............................1
• 121964
• Screw...................................................2
• 275184
• Foam Tape........................................AR
• 002-1709-00 • 3-Way Toggle Valve (incl. item 18).......1
• •NSS
• • Nut ....................................................1
Item
19
20
Part No.
Description
Qty
• 061-0819-00
• 002-1549-00
• Unit Bolt Cover .................................... 1
• Bearings LR Replacement Kit
(includes Items 21 thru 27).................. 1
21
• •NSS
• •3/4-16 screw ...................................... 1
22
• •NSS
• •Bearing Spacer .................................. 1
23
• •NSS
• •Greased Bearing Kit .......................... 1
24
• •NSS
• •Bushing Ring ..................................... 1
25
• •NSS
• •Flange Bearing .................................. 1
26
• •NSS
• •Bearing Cap ....................................... 1
27
• •NSS
• •Stop Nut, 3/4-16................................. 1
28
002-0777-00
Bottle Replacement Kit (1 liter) .............. 1
153282
Bottle Replacement Kit (2.0 liter) - optional
(includes items 8 thru10)..................... 1
29
• 122564
• Friction Bearing ................................... 3
30
• 121997
• Compression Spring............................ 3
31
• 122572
• Set Screw............................................ 3
32
• 122550
• Light Arm Bumper ............................... 1
33
• 122549
• Unit Arm Bumper ................................ 1
34
• 107995
• Screw .................................................. 1
35
• 030-1465-50 • Lower Arm Mounting Bracket .............. 1
36
• 122547
• Set Screw............................................ 3
NSS = Not Sold Separately
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 8/24/16
Page 6-55.2
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Unit Arm Assembly
LR Asepsis 21 or Procenter Unit Arms
2
1
3
34
30
6
16
4
33
5
5
14
18
13
31
12
32
19
11
10
20
17
21
7
15
22
29
8
23
25
9
24
26
28
27
Applies to units w/serial numbers PJ3100 & all PKxxxx and V2200 thru V1642096
Item
Part No.
Description
029-2859-00
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Qty
LR Unit Arm & Support Assembly
(includes items 1 thru 34)
• 016-0856-02 • Needle Bearing ................................... 2
• 016-0837-00 • Slotted Sleeve Bearing ....................... 1
• 122535-01
• Water Bottle Cover.............................. 1
• 122348
• Dowel Pin............................................ 2
• 040-0010-126 • Set Screw............................................ 2
• 061-0771-00 • Knight by Midmark Label .................... 2
• 002-1813-00 • Bottle Cap Assy (includes item 8) ....... 1
• • 014-0176-52 • • O-ring ............................................... 1
• 002-0903-04 • Unit Arm Kit (includes items 1 & 2) ..... 1
• 105480
• Screw .................................................. 2
• 122532-50
• Water Bottle Bracket ........................... 1
• 121964
• Screw .................................................. 2
• 275184
• Foam Tape ....................................... AR
• 002-1709-00 • 3-Way Toggle Valve (incl. item 15) ...... 1
• •NSS
• • Nut.................................................... 1
• 061-0819-00 • Unit Bolt Cover.................................... 1
• 002-1549-00 • Bearings LR Replacement Kit
(includes items 18 thru 24) ................. 1
Item
Part No.
18
19
20
21
22
23
24
25
26
27
28
• •NSS
• •NSS
• •NSS
• •NSS
• •NSS
• •NSS
• •NSS
• 122564
• 121997
• 122572
• 002-0777-00
153282
Description
Qty
• • 3/4-16 Screw .....................................1
• • Bearing Spacer..................................1
• • Greased Bearing Kit ..........................1
• • Bushing Ring .....................................1
• • Flange Bearing ..................................1
• • Bearing Cap ......................................1
• • Stop Nut, 3/4-16 ................................1
• Friction Bearing ...................................3
• Compression Spring............................3
• Set Screw ............................................3
Bottle Replacement Kit (1 liter) ..............1
Bottle Replacement Kit (2.0 liter) - optional
(includes item 7) ..................................1
29
• TPW1709
• Bolt Warning Label ..............................1
30
• 122550
• Light Arm Bumper ...............................1
31
• 122549
• Unit Arm Bumper.................................1
32
• 107995
• Screw ..................................................1
33
• 030-1465-50 • Lower Arm Mounting Bracket ..............1
34
• 122547
• Set Screw ............................................3
NSS = Not Sold Separately
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 8/24/16
Page 6-55.3
Printed in U.S.A.
SECTION VI
PARTS LIST
LR Unit Arm Assembly
2
1
16
3
32
6
33
4
31
5
5
14
18
13
29
12
30
19
11
10
17
20
7
15
21
28
22
8
24
9
23
25
27
26
Applies to units w/serial numbers V1642097 thru present
Item
Part No.
Description
029-2859-00
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Qty
LR Unit Arm & Support Assembly
(includes items 1 thru 33)
• 016-0856-02 • Needle Bearing ................................... 2
• 016-0837-00 • Slotted Sleeve Bearing ....................... 1
• 122535-01
• Water Bottle Cover.............................. 1
• 122348
• Dowel Pin............................................ 2
• 040-0010-126 • Set Screw ........................................... 2
• 061-0771-00 • Knight by Midmark Label .................... 2
• 002-1813-00 • Bottle Cap Assy
(includes item 8) ................................. 1
• • 014-0176-52 • • O-ring ............................................... 1
• 002-0903-04 • Unit Arm Kit (includes items 1 & 2)..... 1
• 105480
• Screw.................................................. 2
• 122532-50
• Water Bottle Bracket ........................... 1
• 121964
• Screw.................................................. 2
• 275184
• Foam Tape ....................................... AR
• 002-1709-00 • 3-Way Toggle Valve (incl. item 15)...... 1
• •NSS
• • Nut.................................................... 1
• 061-0819-00 • Unit Bolt Cover.................................... 1
• 002-1549-01 • Bearings LR Replacement Kit
(includes Items 18 thru 23) ................. 1
Item
18
19
20
21
22
23
24
25
26
27
Part No.
Description
Qty
• •NSS
• •NSS
• •NSS
• •NSS
• •NSS
• •NSS
• 122564
• 121997
• 122572
• 002-0777-00
153282
• • 3/4-16 Screw ..................................... 1
• • Bearing Spacer ................................. 1
• • Greased Bearing Kit.......................... 1
• • Flange Bearing .................................. 1
• • Bearing Cap ...................................... 1
• • Stop Nut, 3/4-16 ................................ 1
• Friction Bearing ................................... 3
• Compression Spring............................ 3
• Set Screw ............................................ 3
Bottle Replacement Kit (1 liter) .............. 1
Bottle Replacement Kit (2.0 liter) - optional
(includes Item 7).................................. 1
28
• TPW1709
• Bolt Warning Label .............................. 1
29
• 122549
• Unit Arm Bumper................................. 1
30
• 107995
• Screw .................................................. 1
31
• 030-1465-50 • Lower Arm Mounting Bracket .............. 1
32
• 122547
• Set Screw ............................................ 3
33
• 122550
• Light Arm Bumper ............................... 1
NSS = Not Sold Separately
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 8/24/16
Page 6-55.4
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Console Components
1
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK
pebble grey
2
17
3
5
4
19
21
6
20
22
7
8
23
J Box
26
16
15
14
13
9
10
12
18
11
KA921603i
Applies to all units with “UA”, “UC”, “UK”, & “UW” serial number prefixes
and units w/ serial numbers PJ1000 thru PJ2588 & PK1000 thru PK1096
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
Part No.
Description
(N.L.A.)
153154-50
153123
•
(N.L.A.)
122546-01
•
(N.L.A.)
122638-50
•
121981-50
121981-50
• 134550
• TPW1669
• TPW1700
• 275184
• 122552
• 122554
• 109191
• 122357
• 122636
• 105480
• 120199
• 105480
• 121972
External Mounting Bracket Assy
(sterling)............................................. 1
(pebble) .............................................. 1
Internal Mounting Bracket Assy ............. 1
• Mounting Bracket Cover (External)
(sterling)............................................. 1
(pebble) .............................................. 1
• Mounting Bracket Cover (Internal)
(sterling)............................................. 1
(pebble) .............................................. 1
• Screw
(sterling)............................................. 4
(pebble) .............................................. 4
• Wiring Diagram Envelope.................... 1
• Concept LR Flow Diagram (External) . 1
• Concept LR Flow Diagram (Internal)... 1
• Foam Tape (per ft.)........................... AR
• Screw .................................................. 1
• Washer ................................................ 1
• Cord Clip ............................................. 3
• Nut (Internal only) ............................... 1
• Cable Clamp (Internal only) ................ 1
• Screw (External).................................. 1
• Screw (Internal)................................... 1
• Screw .................................................. 2
• U Fastener........................................... 4
Qty
Item
14
15
16
17
18
19
Part No.
Description
•
•
•
•
•
•
•
•
•
•
115300
016-0885-00
(N.L.A.)
153054-50
122521-2
• (N.L.A.)
• 122539-50
•
24
(N.L.A.)
153138-50
• • 275255
• • 122632
• • 102308
•
(N.L.A.)
153143-50
• 153149
25
• TPW1728
20
21
22
23
26
Qty
Screw.................................................. 2
Hose Clamp (External only)................ 1
Mtg Bracket Assy (sterling)................ 1
Mtg Bracket Assy (pebble) ................. 1
Umbilical Retaining Bracket
(External only) .................................... 1
• Wire Harness Plate (sterling ............. 1
• Wire Harness Plate (pebble).............. 1
• Umbilical Assy, Assistant’s
Instruments (External only)
(sterling) ............................................ 1
(pebble).............................................. 1
• • Tubing, 1/2” I.D. (External only)........ 1
• • 90° Elbow (External only)................. 1
• • Cable Tie (External only).................. 1
• Umbilical Assy (External only)
(sterling) ............................................ 1
(pebble).............................................. 1
• L/R External Adapter Harness
(External only) (not shown)................. 1
• L/R Concept Installation
Instructions (not shown)...................... 1
Refer to: “LR Unit Arm Assembly” ..... Ref
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/26/14
Page 6-56
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Console Components
NOTE: All painted/plastic
components on this page
are Pebble Grey
1
2
17
3
4
5
19
21
6
20
22
7
8
23
J Box
26
16
15
14
13
9
10
18
12
11
KA921601
Applies to units w/serial numbers PJ2589 & PK1097 thru Present
Applies to units w/ serial numbers V2200 thru Present
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
Part No.
Description
Qty
153154-01
153123-01
• 122546-01
• 122638-01
• 121981-50
• S006-00895
• TPW1669
• TPW1700
• 275184
• 122552
• 122554
• 109191
• 122357
• 122636
• 105480
• 120199
• 105480
• 121972
External Mounting Bracket Assy........... 1
Internal Mounting Bracket Assy ............ 1
• Bracket Cover (External) ..................... 1
• Bracket Cover (Internal) ...................... 1
• Screw .................................................. 4
• Wiring Diagram Envelope.................... 1
• Flow Diagram (External) ..................... 1
• Flow Diagram (Internal)....................... 1
• Foam Tape (per ft.)........................... AR
• Screw .................................................. 1
• Washer ................................................ 1
• Cord Clip ............................................. 3
• Nut (Internal only) ............................... 1
• Cable Clamp (Internal only) ................ 1
• Screw (External).................................. 1
• Screw (Internal)................................... 1
• Screw .................................................. 2
• U Fastener........................................... 4
Item
Part No.
Description
14
15
16
17
•
•
•
•
•
•
•
•
18
19
• 122539-50
• 153138-01
20
21
22
23
24
•
•
•
•
•
25
• TPW1728
107995
016-0885-00
153054-50
122521-2
• 275255
• 122632
• 102308
153143-01
153149
26
Qty
Screw.................................................. 2
Hose Clamp (External only)................ 1
Mtg Bracket Assy ................................ 1
Umbilical Retaining Bracket
(External only) .................................... 1
• Wire Harness Plate............................. 1
• Umbilical Assy, Assistant’s
Instruments (External only) ................... 1
• • Tubing, 1/2” I.D. (External only)........ 1
• • 90° Elbow (External only)................. 1
• • Cable Tie (External only).................. 1
• Umbilical Assy (External only) ............ 1
• L/R External Adapter Harness
(External only) (not shown)................. 1
• L/R Concept Installation
Instructions (not shown)...................... 1
Refer to: “LR Unit Arm Assembly” ......Ref
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/26/14
Page 6-56.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Vac Pak Upper Components
NOTE: All painted/plastic
components on this page
are Sterling Grey
11
10
9
12
7
6
1
5
29
4
8
14
15
28
3
2
27
22
16
33
25
31
34
20
24
23
30
35
21
26
32
19
18
17
36
13
KA926101
Applies to units with “UA”, “UC”, “UK”, & “UW” serial number prefixes
Item
Part No.
Description
1
152339
152282
• 122979
Single Instrument Holder (Shown)......... 1
Twin Instrument Holder .......................... 1
• Single HVE Handpiece Holder
(Shown)............................................... 1
• Twin HVE Handpiece Holder............... 1
• Instrument Holder Mount..................... 1
• Set Screw ............................................ 1
• Screw .................................................. 1
• Instrument Holder Bearing .................. 2
• Tang Spacer ........................................ 1
• Instrument Holder................................ 1
• Locking Knob Assembly ...................... 1
Assistant’s Syringe (Refer to
“Unheated Syringe”) .............................. 1
Saliva Ejector Valve & Tubing Assy.
(For parts breakdown, refer to:
“Saliva Ejector/HVE Valve
Components”) ..................................... 1
HVE Hdpc. Valve & Tubing Assy.
(For parts breakdown, refer to:
“Saliva Ejector/HVE Valve
Components”) ..................................... 1
Upper Swivel Bracket Assembly,
Single (Shown).................................... 1
Upper Swivel Bracket Assembly,
Twin ..................................................... 1
Screw..................................................... 2
Vacuum Swivel Bracket ......................... 1
• Single/Twin HVE Hose Swivel ........... 1
2
3
4
5
6
7
8
9
10
• 122980
• 121094-50
• 120913
• 121148
• 122707
• 121096-50
• 121092
• 152157
152709
11
152955
12
152148
13
153136
153137
14
15
16
• 122616
• 122570-50
• 002-0841-00
Quantity
Item
Part No.
Description
17
18
19
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
20
21
22
23
24
25
26
27
28
29
30
31
• 122606-2
• 122605-2
• 122603
• 122604
C5682
122608
122615
275328
33
34
35
36
37
• 275255
• 275635
• 122611-2
• 122571-50
• 122358
• 122577
• 121981-50
• 122573
• 122610
• 122612
• 122613
117477
149680
117736
117479
• TP1232
38
39
• TP1106
• TPW1704
32
Quantity
• Nipple, Saliva Ejector ....................... 1
• Nipple, HVE...................................... 1
• Single HVE Swivel Body (Shown) .... 1
• Twin HVE Swivel Body ..................... 1
O-Ring ................................................ 1
Grommet............................................. 1
Nipple, Upper Swivel .......................... 1
1” Gray Umbilical Tubing (order
by FT) .............................................. 1.7
• 1/2” I.D. Gray Tubing (order by FT) .. 2.6
• Syringe Tubing (order by FT) ........... 1.7
• Standoff .............................................. 2
• Retainer Bracket ................................. 1
• Nut ...................................................... 2
• E-Clip .................................................. 1
• Screw.................................................. 2
• Single HVE Chairback Cover (Shown) 1
• Twin HVE Chairback Cover................. 1
• Single HVE Tube Collar (Shown)........ 1
• Twin HVE Tube Collar ......................... 1
Fitting, Tee............................................. 2
Knob Assembly ..................................... 2
Collar ..................................................... 2
Uni-Clamp, 1/8” O.D. ............................. 8
• Assistant’s Handpiece Instructions
(Not Shown)........................................ 1
• Syringe Instructions (Not Shown) ....... 1
• LR Assistant’s Installation
Instructions (Not Shown) .................... 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-57
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Vac Pak Upper Components
NOTE: All painted/plastic
components on this page
are Pebble Grey
11
10
9
12
7
6
1
5
29
4
8
14
15
28
3
2
27
22
16
33
34
35
21
26
32
20
24
25
31
23
30
19
18
17
36
13
KA926101
Applies to units with “PJ”, “PK” Thru “V38915 serial number prefix
Item
1
2
Part No.
Description
152158-01
152160-01
• 122979
Single Instrument Holder (Shown)......... 1
Twin Instrument Holder .......................... 1
• Single HVE Handpiece Holder
(Shown)............................................... 1
• Twin HVE Handpiece Holder............... 1
• Instrument Holder Mount..................... 1
• Set Screw ............................................ 1
• Screw .................................................. 1
• Instrument Holder Bearing .................. 2
• Tang Spacer ........................................ 1
• Instrument Holder................................ 1
• Locking Knob Assembly ...................... 1
Assistant’s Syringe (Refer to
“Unheated Syringe”) .............................. 1
Saliva Ejector Valve & Tubing Assy.
(For parts breakdown, refer to:
“Saliva Ejector/HVE Valve
Components”) ..................................... 1
HVE Hdpc. Valve & Tubing Assy.
(For parts breakdown, refer to:
“Saliva Ejector/HVE Valve
Components”) ..................................... 1
Upper Swivel Bracket Assembly,
Single (Shown).................................... 1
Upper Swivel Bracket Assembly,
Twin ..................................................... 1
Screw..................................................... 2
Vacuum Swivel Bracket ......................... 1
• Single/Twin HVE Hose Swivel .............1
3
4
5
6
7
8
9
10
• 122980
• 121094-50
• 120913
• 121148
• 122707
• 121096-50
• 121092
• 152157-01
152709-01
11
152955-01
12
152148-01
13
153136-01
153137-01
14
15
16
• 122616
• 122570-50
• 002-0841-00
Quantity
Item
Part No.
Description
17
18
19
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
20
21
22
23
24
25
26
27
28
29
30
31
• 122606-2
• 122605-2
• 122603
• 122604
C5682
122615
122608
275328
33
34
35
36
37
• S059-00125
• 275635
• 122611-2
• 122571-50
• 122358
• 122577
• 121981-50
• 122573-01
• 122610-01
• 122612
• 122613
117477
149680
117736
117479
• TP1232
38
• TPW1704
32
Quantity
• Nipple, Saliva Ejector ....................... 1
• Nipple, HVE...................................... 1
• Single HVE Swivel Body (Shown) .... 1
• Twin HVE Swivel Body ..................... 1
O-Ring ................................................ 1
Grommet............................................. 1
Nipple, Upper Swivel .......................... 1
1” Gray Umbilical Tubing (order
by FT) .............................................. 1.7
• 1/2” I.D. Gray Tubing (order by FT) .. 2.6
• Syringe Tubing (order by FT) ........... 1.7
• Standoff .............................................. 2
• Retainer Bracket ................................. 1
• Nut ...................................................... 2
• E-Clip .................................................. 1
• Screw.................................................. 2
• Single HVE Chairback Cover (Shown) 1
• Twin HVE Chairback Cover................. 1
• Single HVE Tube Collar (Shown)........ 1
• Twin HVE Tube Collar ......................... 1
Fitting, Tee............................................. 2
Knob Assembly ..................................... 2
Collar ..................................................... 2
Uni-Clamp, 1/8” O.D. ............................. 8
• Assistant’s Handpiece Instructions
(Not Shown)........................................ 1
• LR Assistant’s Installation
Instructions (Not Shown) .................... 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev.12/09
Page 6-57.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Vac Pak Upper Components
NOTE: All painted/plastic
components on this page
are Pebble Grey
11
10
9
12
7
6
1
5
4
8
14
15
3
2
19
22
18
21
17
16
20
23
For Twin
HVE Units
13
DA170300i
Applies to units with V38916 thru Present serial number prefix
Item
1
2
Part No.
Description
152158-01
152160-01
• 122979
Single Instrument Holder (Shown) .........1
Twin Instrument Holder ..........................1
• Single HVE Handpiece Holder
(Shown) ...............................................1
• Twin HVE Handpiece Holder ...............1
• Instrument Holder Mount .....................1
• Set Screw ............................................1
• Screw...................................................1
• Instrument Holder Bearing ..................2
• Tang Spacer ........................................1
• Instrument Holder................................1
• Locking Knob Assembly ......................1
Assistant’s Syringe (Refer to
“Unheated Syringe”)...............................1
Saliva Ejector Valve & Tubing Assy.
(For parts breakdown, refer to:
“Saliva Ejector/HVE Valve
Components”)......................................1
HVE Hdpc. Valve & Tubing Assy.
(For parts breakdown, refer to:
“Saliva Ejector/HVE Valve
Components”)......................................1
3
4
5
6
7
8
9
10
• 122980
• 121094-50
• 120913
• 121148
• 122707
• 121096-50
• 121092
• 152157-01
152709-01
11
152147-01
12
152148-01
Quantity
Item
Part No.
Description
13
153137-01
14
15
16
• 122616
• 122570-50
• 275328
17
18
19
20
21
23
• S059-00125
• 275635
• 122611-2
• 121981-50
• 122573-01
• 122610-01
• 122612
• 122613
053-1526-00
24
• TP1232
25
• TPW1704
Upper Swivel Bracket Assembly,
Twin (Shown)....................................... 1
Screw..................................................... 2
Vacuum Swivel Bracket ......................... 1
• 1” Gray Umbilical Tubing (order
by FT)............................................... 1.7
• 1/2” I.D. Gray Tubing (order by FT) .. 2.6
• Syringe Tubing (order by FT) ........... 1.7
• Standoff............................................... 2
• Screw .................................................. 2
• Single HVE Chairback Cover (Shown) 1
• Twin HVE Chairback Cover ................. 1
• Single HVE Tube Collar (Shown) ........ 1
• Twin HVE Tube Collar ......................... 1
Y-Connector (3/8" I.D. Tubing)
(For Twin HVE Units) ............................. 1
• Assistant’s Handpiece Instructions
(Not Shown) ........................................ 1
• LR Assistant’s Installation
Instructions (Not Shown)..................... 1
22
Quantity
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-57.2
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Vac Pak Upper Components
NOTE: All painted/plastic
components on this page
are Pebble Grey
9
7
5
11
10
12
6
1
8
4
14
15
3
2
19
22
18
21
17
16
23
20
13
DA170302i
Applies to units with V22410 thru Present serial number prefix
Item
1
2
Part No.
Description
152158-01
152160-01
• 122979
Single Instrument Holder (Shown) .........1
Twin Instrument Holder ..........................1
• Single HVE Handpiece Holder .............
(Shown) ...............................................1
• Twin HVE Handpiece Holder ...............1
• Instrument Holder Mount .....................1
• Screw...................................................1
• Instrument Holder Bearing ..................2
• Tang Spacer ........................................1
• Washer, Belleville ................................1
• Instrument Holder ................................1
• Locking Knob Assembly ......................1
Assistant’s Syringe (Refer to
“Unheated Syringe”)...............................1
Saliva Ejector Valve & Tubing Assy.
(For parts breakdown, refer to:
“Saliva Ejector/HVE Valve
Components”)......................................1
HVE Hdpc. Valve & Tubing Assy.
(For parts breakdown, refer to:
“Saliva Ejector/HVE Valve
Components”)......................................1
3
4
5
6
7
8
9
10
• 122980
• 121094-50
• 121148
• 122707
• 121096-50
• 525-0063-00
• 121092
• 152157-01
152709-01
11
152147-01
12
152148-01
Quantity
Item
Part No.
Description
13
153136-01
Upper Swivel Bracket Assembly,
(For Single HVE Unit ) ........................... 1
Upper Swivel Bracket Assembly, (For
(For Twin HVE Unit {Shown}) ............... 1
Screw..................................................... 2
Vacuum Swivel Bracket ......................... 1
• 1” Gray Umbilical Tubing (order
by FT)............................................... 1.7
• 1/2” I.D. Gray Tubing (order by FT) .. 2.6
• Syringe Tubing (order by FT) ........... 1.7
• Standoff............................................... 2
• Screw .................................................. 2
• Single HVE Chairback Cover (Shown) 1
• Twin HVE Chairback Cover ................. 1
• Single HVE Tube Collar (Shown) ........ 1
• Twin HVE Tube Collar ......................... 1
Y-Connector (3/8" I.D. Tubing (For Twin
HVE Units) .......................................... 1
• Assistant’s Handpiece Instructions
(Not Shown) ........................................ 1
• LR Assistant’s Installation
Instructions (Not Shown)..................... 1
153137-01
14
15
16
• 122616
• 122570-50
• S059-00123
17
18
19
20
21
23
•
•
•
•
•
•
•
•
•
24
• TP1232
25
• TPW1704
22
S059-00125
275635
122611-2
121981-50
122573-01
122610-01
122612
122613
053-1526-00
Quantity
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-57.3
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Vac Pak Lower Components
1
2
43
42
46
47
45
44
9
41
8
31
38
3
36
37
40
32
4
34
29
28
24
35
30
39
15
14
5
31
25
6
10
11
7
12
26
19
22
20
21
33
23
27
16
13
17
18
KA926000
Applies to units with “UA”, “UC”, “UK”, & “UW” serial number prefixes
Item
Part No.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
153352
122635
117481
117479
117477
149680
117736
109191
122602
122653
122654-50
121107
•
•
•
121129
121807
137258
•
•
•
120178
120875-50
Standoff Assembly................................. 2
Platform Cover ....................................... 1
Fitting ..................................................... 2
Uni-Clamp, 1/8” O.D............................... 4
Fitting, Tee ............................................. 2
Knob Assembly...................................... 2
Collar ..................................................... 2
Cord Clip................................................ 3
Lower Swivel Cover ............................... 1
Washer .................................................. 2
Screw..................................................... 2
Poly Quick Air Disconnect (Female) ...... 1
• Nut (Included with Item 11) ................. 1
• Ferrule (Included with Item 11) ........... 1
• Coupling Nut (Included with Item 11) .. 1
Poly Quick Air Disconnect (Male) .......... 1
Washer .................................................. 1
Poly Quick Water Disconnect (Female) . 1
• Coupling Nut (Included with Item 18) .. 1
• Ferrule (Included with Item 18) ........... 1
• Coupling Nut (Included with Item 18) .. 1
Set Screw .............................................. 1
Knob, Water Control Valve..................... 1
Quantity
Item
Part No.
Description
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44a
44b
45
46
47
029-2449-01
•
•
•
122181
121108
109714
117660
117349
137259
042-0056-04
122599
122609-50
P15280
118917
117624
151783
(N.L.A.)
122568-50
122358
118613
002-10259-00
118614
057-0831-50
122600
Needle Valve ......................................... 1
• Nut (Included with Item 24)................. 1
• Lockwasher (Included with Item 24) ... 1
• Trim Ring (Included with Item 24) ....... 1
Spacer Washer...................................... 1
Kwik-Connect Adapter .......................... 1
Fitting .................................................... 1
Gasket ................................................... 1
Fitting .................................................... 1
Poly Quick Water Disconnect (Male) ..... 1
E-Clip .................................................... 1
Nipple, Lower Swivel ............................. 1
Spacer, Solids Collector ........................ 1
Cap Sleeve ............................................ 1
Capplug ................................................. 1
Toggle Cap ............................................ 1
Screw .................................................... 2
Housing Assembly................................. 1
Swivel Bracket ....................................... 1
Nut......................................................... 2
Basket ................................................... 1
Basket bulk kit ..................................... 50
O-Ring ................................................... 1
Cover, Solids Collector .......................... 1
Bearing, Lower Swivel........................... 1
Quantity
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/6/18
Page 6-58
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Vac Pak Lower Components
1
2
43
42
46
47
45
44
9
41
8
31
38
3
36
37
40
32
4
34
29
28
24
35
30
39
15
14
5
31
25
6
10
11
7
12
26
19
NOTE: All painted/plastic
components on this page
are Pebble Grey
22
20
21
33
23
27
16
13
17
18
KA926000
Applies to units with “PJ”, “PK” & “V” serial number prefixes
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Part No.
153352
122635-01
117481
117479
117477
149680
117736
109191
122602-01
122653
122654-50
121107
•
•
•
121129
121807
137258
•
•
•
120178
120875-50
Description
Quantity
Standoff Assembly................................. 2
Platform Cover ....................................... 1
Fitting ..................................................... 2
Uni-Clamp, 1/8” O.D............................... 4
Fitting, Tee ............................................. 2
Knob Assembly...................................... 2
Collar ..................................................... 2
Cord Clip................................................ 3
Lower Swivel Cover ............................... 1
Washer .................................................. 2
Screw..................................................... 2
Poly Quick Air Disconnect (Female) ...... 1
• Nut (Included with Item 11) ................. 1
• Ferrule (Included with Item 11) ........... 1
• Coupling Nut (Included with Item 11) .. 1
Poly Quick Air Disconnect (Male) .......... 1
Washer .................................................. 1
Poly Quick Water Disconnect (Female) . 1
• Coupling Nut (Included with Item 18) .. 1
• Ferrule (Included with Item 18) ........... 1
• Coupling Nut (Included with Item 18) .. 1
Set Screw .............................................. 1
Knob, Water Control Valve..................... 1
Item
Part No.
Description
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44a
44b
45
46
47
029-2449-01
•
•
•
122181
121108
109714
117660
117349
137259
042-0056-04
122599
122609-50
P15280
118917
117624
151783-50
002-1805-00
122568-50
122358
118613
002-10259-00
118614
057-0831-50
122600
Needle Valve ......................................... 1
• Nut (Included with Item 24)................. 1
• Lockwasher (Included with Item 24) ... 1
• Trim Ring (Included with Item 24) ....... 1
Spacer Washer...................................... 1
Kwik-Connect Adapter .......................... 1
Fitting .................................................... 1
Gasket ................................................... 1
Fitting .................................................... 1
Poly Quick Water Disconnect (Male) ..... 1
E-Clip .................................................... 1
Nipple, Lower Swivel ............................. 1
Spacer, Solids Collector ........................ 1
Cap Sleeve ............................................ 1
Capplug (Earlier Units Only) ................. 1
Toggle Cap ............................................ 1
Screw .................................................... 2
Housing Kit............................................ 1
Swivel Bracket ....................................... 1
Nut......................................................... 2
Basket ................................................... 1
Basket bulk kit ..................................... 50
O-Ring ................................................... 1
Cover, Solids Collector .......................... 1
Bearing, Lower Swivel........................... 1
Quantity
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/6/18
Page 6-58.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Vac Pak Lower Components
1
2
41
40
44
47
43
42
9
39
8
34
38
37
36
31
35
3
32
24
30
29
28
4
15
14
5
31
25
6
10
11
7
12
26
19
22
20
21
33
23
27
16
13
17
18
KA926001
Applies to units with V38916 thru Present serial number prefix
Item
Part No.
Description
Quantity
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
153352
122635-01
117481
117479
117477
149680
117736
109191
122602-01
122653
122654-50
121107
•
•
•
121129
121807
137258
•
•
•
120178
120875-50
Standoff Assembly ................................. 2
Platform Cover ....................................... 1
Fitting ..................................................... 2
Uni-Clamp, 1/8” O.D............................... 4
Fitting, Tee ............................................. 2
Knob Assembly...................................... 2
Collar ..................................................... 2
Cord Clip................................................ 3
Lower Swivel Cover ............................... 1
Washer................................................... 2
Screw ..................................................... 2
Poly Quick Air Disconnect (Female) ...... 1
• Nut (Included with Item 11) ................. 1
• Ferrule (Included with Item 11)............ 1
• Coupling Nut (Included with Item 11) .. 1
Poly Quick Air Disconnect (Male) .......... 1
Washer................................................... 1
Poly Quick Water Disconnect (Female) . 1
• Coupling Nut (Included with Item 18) .. 1
• Ferrule (Included with Item 18)............ 1
• Coupling Nut (Included with Item 18) .. 1
Set Screw .............................................. 1
Knob, Water Control Valve ..................... 1
Item
Part No.
Description
Quantity
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42a
42b
43
44
029-2449-01
•
•
•
122181
121108
109714
117660
117349
137259
122609-50
025-0049-05
118917
117624
151783-50
002-1805-00
122568-50
122358
118613
002-10259-00
118614
057-0831-50
Needle Valve ......................................... 1
• Nut (Included with Item 24)................. 1
• Lockwasher (Included with Item 24) ... 1
• Trim Ring (Included with Item 24) ....... 1
Spacer Washer...................................... 1
Kwik-Connect Adapter........................... 1
Fitting..................................................... 1
Gasket ................................................... 1
Fitting..................................................... 1
Poly Quick Water Disconnect (Male) ..... 1
Spacer, Solids Collector ........................ 1
Compression Spring.............................. 2
Capplug (Earlier Units Only) ................. 1
Toggle Cap ............................................ 1
Screw .................................................... 2
Housing Kit ............................................ 1
Swivel Bracket ....................................... 1
Nut......................................................... 2
Basket ................................................... 1
Basket bulk kit ..................................... 50
O-Ring ................................................... 1
Cover, Solids Collector .......................... 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/6/18
Page 6-58.2
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Cuspidor Assembly
8
23
3
7
24
1
4
2
5
22
6
20
19
7
20
25
21
26
18
17
9
10
12
13
11
12
12
13
12
14a
TORQUE LEGEND
Serial Number
Prefix
Paint
Color
ITEM#
14A
UA, UC, UK, UW
sterling grey
14B
PL
pebble grey
14b
TORQUE
5.0 FT-LBS
(7 N•M)
8.0 FT-LBS
(11 N•M)
16
15
KA926600
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14a
14b
15
Part No.
Description
117660
104499
109714
117349
117479
117480
122161
(N.L.A.)
122672-50
Gasket ................................................... 2
Hose Clamp ........................................... 1
Fitting ..................................................... 1
Fitting ..................................................... 1
Uni-Clamp, 1/8” O.D............................... 1
Sleeve Clamp......................................... 1
Set Screw .............................................. 3
Adaptor (sterling).................................. 1
Adaptor (pebble) ................................... 1
Refer to “Cuspidor Assembly”............ Ref
Bearing .................................................. 1
Support Arm Assy (sterling) ................. 1
Support Arm Assy (pebble)................... 1
Washer .................................................. 4
Bearing .................................................. 2
Screw..................................................... 1
Screw..................................................... 1
LR Cover Assembly ............................... 1
122696
(N.L.A.)
153176-50
120712
110207
117471
117471
115328
Quantity
Item
Part No.
Description
16
17
122657
(N.L.A.
120227-50
122700
040-0375-76
122679
122678
(N.L.A.
153175-50
(N.L.A.
122649-50
(N.L.A.
122704-50
122705-2
P1673
P507
TPW1718
Spacer (units w/o Vac Pak) ................... 1
Plug Button (sterling) ........................... 2
Plug Button (pebble)............................. 2
Screw, 1-1/4” (units w/o Vac Pak).......... 2
Screw, 1” (units w/Vac Pak)................... 2
Washer .................................................. 2
Dowel Pin (adhesive #064-0026-00) ..... 2
Mounting Bracket (sterling) .................. 1
Mounting Bracket (pebble) ................... 1
Bracket Plate (sterling)......................... 1
Bracket Plate (pebble) .......................... 1
Retaining Plate (sterling) ..................... 1
Retaining Plate (pebble) ....................... 1
Umbilical Retaining Plate ...................... 1
Washer .................................................. 3
Nut......................................................... 3
Installation Instructions (not shown) ...... 1
18
19
20
21
22
23
24
25
26
27
Quantity
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 7/11
Page 6-59
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Assistant’s Instrument Holder
7
11
9
6
12
5
10
14
8
28
15
13
18
4
23
14
24
19
3
17
20
16
21
25b
2
1
24
23
22
25a
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PL
pebble grey
TORQUE LEGEND
ITEM#
26A
26B
27
26
TORQUE
5.0 FT-LBS
(7 N•M)
8.0 FT-LBS
(11 N•M)
KA926300
Applies to units with “PJ”, “PK” Thru “V222409 serial number prefix
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Part No.
Description
Quantity
121751
C4507
100099
122720
122707
121148
(N.L.A.)
121094-50
106753
122979
122980
122161
(N.L.A.)
122719-50
(N.L.A.)
122649-50
122679
122678
(N.L.A.)
153175-50
122700
040-0375-76
Screw ..................................................... 1
Lockwasher............................................ 1
Washer................................................... 1
Spacer, Instrument Holder ..................... 1
Instrument Holder Bearing..................... 1
Set Screw............................................... 1
Inst. Holder Mount (sterling) ................. 1
Inst. Holder Mount (pebble) .................. 1
Set Screw............................................... 1
Single HVE Handpiece Holder .............. 1
Twin HVE Handpiece Holder ................. 1
Set Screw............................................... 1
Post (sterling) .......................................1
Post (pebble) ......................................... 1
Mtg. Bracket Plate (sterling) ................. 1
Mtg. Bracket Plate (pebble)................... 1
Washer................................................... 2
Dowel Pin (adhesive #064-0026-00)...... 2
Mounting Bracket (sterling)................... 1
Mounting Bracket (pebble) ....................1
Screw, 1-1/4” (units w/o Vac Pak) ..........2
Screw, 1” (units w/Vac Pak) ................... 2
Item
Part No.
Description
17
(N.L.A.)
120227-50
(N.L.A.)
122716-50
122718
Plug Button (sterling) ........................... 2
Plug Button (pebble)............................. 2
Upper Sleeve (sterling) ........................ 1
Upper Sleeve (pebble).......................... 1
Bearing .................................................. 1
Lower Sleeve (apply G15000181,
Lubriplate to threads)
(sterling) ............................................ 1
(pebble).............................................. 1
Set Screw .............................................. 1
Cuspidor Arm Assy (sterling) ............... 1
Cuspidor Arm Assy (pebble)................. 1
Washer .................................................. 4
Bearing .................................................. 2
Screw .................................................... 1
Screw .................................................... 1
LR Cover Assembly (sterling) .............. 1
LR Cover Assembly (pebble)................ 1
Spacer (Units w/o Vac Pak)................... 2
Refer to “LR Unit Instrument Tray
Assembly” ........................................Ref
Installation Instructions (not shown) ...... 1
18
19
20
27
28
(N.L.A.)
122717-50
106753
(N.L.A.)
153176-50
120712
110207
117471
117471
(N.L.A.)
153228-01
122657
153218
29
TPW1724
21
22
23
24
25a
25b
26
Quantity
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 7/11
Page 6-60
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Assistant’s Instrument Holder
8
7
11
9
12
6
5
10
14
15
13
28
18
4
23
14
24
19
3
17
20
16
21
25b
2
1
23
24
22
25a
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PL
pebble grey
ITEM#
26A
26B
27
26
TORQUE LEGEND
TORQUE
5.0 FT-LBS
(7 N•M)
8.0 FT-LBS
(11 N•M)
KA926301
Applies to units with V22410 thru Present serial number prefix
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Part No.
Description
Quantity
121751
C4507
100099
122720
122707
525-0063-00
121148
(N.L.A.)
121094-50
122979
122980
122161
(N.L.A.)
122719-50
(N.L.A.)
122649-50
122679
122678
(N.L.A.)
153175-50
122700
040-0375-76
Screw..................................................... 1
Lockwasher ........................................... 1
Washer .................................................. 1
Spacer, Instrument Holder..................... 1
Instrument Holder Bearing .................... 1
Belleville Spring Washer........................ 1
Set Screw .............................................. 1
Inst. Holder Mount (sterling)................. 1
Inst. Holder Mount (pebble) .................. 1
Single HVE Handpiece Holder ............. 1
Twin HVE Handpiece Holder ................. 1
Set Screw .............................................. 1
Post (sterling) ....................................... 1
Post (pebble)......................................... 1
Mtg. Bracket Plate (sterling) ................. 1
Mtg. Bracket Plate (pebble) .................. 1
Washer .................................................. 2
Dowel Pin (adhesive #064-0026-00) ..... 2
Mounting Bracket (sterling) .................. 1
Mounting Bracket (pebble).................... 1
Screw, 1-1/4” (units w/o Vac Pak).......... 2
Screw, 1” (units w/Vac Pak) ................... 2
Item
Part No.
Description
17
(N.L.A.)
120227-50
(N.L.A.)
122716-50
122718
Plug Button (sterling) ............................2
Plug Button (pebble)..............................2
Upper Sleeve (sterling) .........................1
Upper Sleeve (pebble)...........................1
Bearing...................................................1
Lower Sleeve (apply G15000181,
Lubriplate to threads)
(sterling) .............................................1
(pebble)...............................................1
Set Screw...............................................1
Cuspidor Arm Assy (sterling)................1
Cuspidor Arm Assy (pebble) .................1
Washer...................................................4
Bearing...................................................2
Screw .....................................................1
Screw .....................................................1
LR Cover Assembly (sterling) ...............1
LR Cover Assembly (pebble).................1
Spacer (Units w/o Vac Pak) ...................2
Refer to “LR Unit Instrument Tray
Assembly”........................................ Ref
Installation Instructions (not shown).......1
18
19
20
27
28
(N.L.A.)
122717-50
106753
(N.L.A.)
153176-50
120712
110207
117471
117471
(N.L.A.)
153228-01
122657
153218
29
TPW1724
21
22
23
24
25a
25b
26
Quantity
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 7/11
Page 6-60.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Unit Instrument Tray Assembly
12
11
2
1
3
13
4
6
5
7
14
8
15
6
5
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PL
pebble grey
16
17
9
10
KA926700
Item
1
2
3
4
5
6
7
Part No.
Description
(N.L.A.)
153218-01
116599
(N.L.A.)
120613-01
(N.L.A.)
120617-50
120585-2
119458
119462
120579
Instrument Tray Assembly
(includes items 1 thru 18)
(sterling)
(pebble)
Tray ........................................................ 1
Tray Support (sterling) .......................... 1
Tray Support (pebble) ........................... 1
Threaded Plate (sterling)...................... 1
Threaded Plate (pebble) ....................... 1
Tray Arm Pin .......................................... 1
Thrust Washer ....................................... 4
Needle Bearing ...................................... 2
Tray Arm Bearing ................................... 1
Quantity
Item
8
9
10
11
12
13
14
15
16
17
18
Part No.
Description
(N.L.A.)
120961-50
(N.L.A.)
120580-50
120612
120612
119905
122726
122707
100099
C4507
122724
TPW1764
Movable Arm (sterling)......................... 1
Movable Arm (pebble) .......................... 1
Cap (sterling) ....................................... 1
Cap (pebble)......................................... 1
Screw .................................................... 3
Screw .................................................... 4
Screw .................................................... 4
Bearing.................................................. 1
Bearing.................................................. 1
Washer .................................................. 1
Lockwasher ........................................... 1
Screw .................................................... 1
Installation Instructions (not shown) ...... 1
Quantity
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-61
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Large Junction Box, 120V
40
1
43 44
39
38
40
42
41
2
3
37
5
7
4
46
45
6
15
8
36
35
16
49
48
6
33
14
20
25
11
32
12
31
30
47
9
10
17
34
50
13
29
28 27
19
25
23
26
NOTE: Opitional
Items may vary.
24 21
18
22
KA919702i
Applies to units with “UA”, “UC”, “UK”, & “UW” serial number prefixes
Item
Part No.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
122394
TP1616
040-0010-36
P507
122393-50
117358
J Box Cover ........................................... 1
J Box Flow Diagram............................... 1
Screw..................................................... 2
Nut ......................................................... 3
Valve Mounting Bracket ......................... 1
Nut ......................................................... 4
Refer to “Valve Block Assembly”)....... Ref
Screw..................................................... 2
“U” Fastener........................................... 4
Thumbscrew .......................................... 4
1/2” Plug ................................................ 2
3/4” Plug ................................................ 2
1” Plug ................................................... 1
Umbilical Retainer Bracket..................... 1
Wing Nut ................................................ 3
Screw..................................................... 2
Umbilical Retainer Bracket (Used with
Typical Large Umbilical)......................... 1
115V Power Rating Label ...................... 1
Screw (#6-32 x 3/8") .............................. 2
120 V HG Outlet .................................... 1
Screw..................................................... 2
Switch, Modified..................................... 1
15 Amp Fuse Label................................ 2
Fuse Warning Label............................... 1
Fuse Holder, 3AG .................................. 2
18
19
20
21
22
23
24
25
P9216
121971
153037
120236
120227
(N.L.A.)
122597-50
120997
040-0010-36
122390-2
061-0845-00
040-0006-97
122586
122121
TPW1465
TPW1464
122541
Qty
Item
Part No.
Description
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
111541
(N.L.A.)
P14718
P507
152961
117358
122391-50
040-0010-36
47
48
49
50
(N.L.A.)
122622-50
122358
P1673
15 Amp Fuse, 3AG (Not Shown) ........... 2
J Box Frame Assembly, Large............... 1
Lockwasher, Tooth................................. 1
Nut......................................................... 1
Regulator Assembly .............................. 1
Nut......................................................... 1
Regulator Mounting Plate...................... 1
Screw .................................................... 1
Nut (Included with item 30) ................... 1
Connector.............................................. 3
Jiffy Box, Electrical ................................ 1
Warning Label, Separate Circuit ........... 1
Ground Identification label .................... 4
Nut......................................................... 1
Lockwasher, Tooth................................. 2
Screw .................................................... 1
Umbilical Stub ....................................... 1
120 V Power Stub Cable ....................... 1
120V HG Plug ....................................... 1
Rating Plate........................................... 1
Water Valve Assembly (Refer to
“Water Valve Assembly”...................Ref
Umbilical Retainer Bracket ................... 1
Cover Plate, (Units w/o Outlet) .............. 1
Nut......................................................... 2
Washer .................................................. 3
015-2104-00
121533
300041
112504
P507
P14718
156101
153010
152774
122618
TPW1683
152149
Qty
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-62
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Large Junction Box, 120V
37
1
40 41
36
35
37
39
38
2
3
34
13
42
12
33
46
4
32
7
14
31
45
44
5
30
43
6
11
17
22
8
29
9
28
10
26
27
NOTE: All painted/plastic
components on this page
are Pebble Grey
25 24
16
22
20
23
21 18
15
19
NOTE: Opitional
Items may vary.
KA987502i
Applies to units with serial numbers PJ1000 thru PJ1869, PK1000 thru PK1041,
PL1000 thru PL1571 & PM1000 thru 1163
Item
Part No.
Description
122394-01
TP1616
J Box Cover ........................................... 1
J Box Flow Diagram............................... 1
Refer to “Air Control Assembly”) ........ Ref
Refer to “Water Valve Assembly”)...... Ref
Nut ......................................................... 2
“U” Fastener........................................... 4
Thumbscrew .......................................... 4
1/2” Plug ................................................ 2
3/4” Plug ................................................ 2
1” Plug ................................................... 1
Umbilical Retainer Bracket..................... 1
Wing Nut ................................................ 3
Screw..................................................... 2
Umbilical Retainer Bracket (Used with
Typical Large Umbilical)......................... 1
115V Power Rating Label ...................... 1
Screw (#6-32 x 3/8") .............................. 2
120 V HG Outlet (includes item 18) ....... 1
• Screw .................................................. 2
Switch, Modified..................................... 1
15 Amp Fuse Label................................ 2
Fuse Warning Label............................... 1
Fuse Holder, 3AG .................................. 2
15 Amp Fuse, 3AG (Not Shown) ........... 2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
117358
121971
153037
120236-00
120227-00
121872-00
122597-50
120997
040-0010-36
122390-2
15
16
17
18
19
20
21
22
23
061-0845-00
004-0006-97
122586
•
122121
TPW1465
TPW1464
122541
111541
Qty
Item
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
Part No.
Description
152959-01
P14718
P507
152961
117358
122391-50
040-0010-36
•
015-2104-00
121533
300041
112504
P507
P14718
156101
153010-01
152774-01
122618
TPW1683
122671-00
122622-00
122358
P1673
J Box Frame Assembly, Large............... 1
Lockwasher, Tooth................................. 1
Nut......................................................... 3
Regulator Assembly ............................. 1
Nut......................................................... 1
Regulator Mounting Plate...................... 1
Screw .................................................... 1
• Nut (Included with item 27) ................. 1
Connector.............................................. 3
Jiffy Box, Electrical ................................ 1
Warning Label, Separate Circuit ........... 1
Ground Identification label .................... 4
Nut......................................................... 1
Lockwasher, Tooth................................. 2
Screw .................................................... 1
Umbilical Stub ....................................... 1
120 V Power Stub Cable ....................... 1
120V HG Plug ....................................... 1
Rating Plate........................................... 1
Umbilical Retainer Bracket ................... 1
Cover Plate, (Units w/o Outlet) .............. 1
Nut......................................................... 2
Washer .................................................. 3
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 8/06
Page 6-62.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
2
33
Large Junction Box, 120V
16
22 23
1
3
24
17
26
25
27
20
21
32
34
36
28
29
30
18
35
31
4
2
19
37
5
3
42
44
2
41
17
38
8
39
40
14
43
6
3
17
42
7
16
NOTE: All painted/plastic
components on this page
are Pebble Grey
9
12
15
14
12
13
11
10
NOTE: Opitional
Items may vary.
KA987507i
Applies to units with serial numbers PJ1870, PK1042, PL1572, & PM1164 thru Present
Applies to units w/ serial numbers V2200 thru Present
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Part No.
Description
122394-01
040-0010-36
117358
121971
153037
120227-00
029-2632-00
120997
040-0006-97
122121
TPW1464
TPW1465
111541
122541
029-2889-00
P14718
P507
015-2104-00
121533
156101
015-1599-00
152774-01
122618
061-0653-00
J Box Cover ........................................... 1
Screw.................................................. AR
Square Nut.......................................... AR
“U” Fastener........................................... 4
Thumbscrew .......................................... 4
3/4” Plug ............................................. AR
Power Cord Cover Plate ........................ 1
Wing Nut ................................................ 3
Screw (#6-32 x 3/8") .............................. 2
120 V Switch, Modified .......................... 1
Fuse Warning Label............................... 1
15 Amp Fuse Label................................ 2
15 Amp Fuse, 3AG (Not Shown) ........... 2
Fuse Holder, 3AG .................................. 2
J Box Frame Assembly, Large ............... 1
Lockwasher, Tooth ................................. 2
Nut ...................................................... AR
Connector .............................................. 2
Jiffy Box, Electrical................................. 1
Screw..................................................... 1
J-Box to APC Cable ............................... 1
120 V Power Stub Cable........................ 1
120V HG Plug........................................ 1
Ground Identification Label.................... 2
Qty
Item
Part No.
Description
300041
003-1191-00
003-1190-00
061-0741-00
Branch Circuit Label .............................. 1
Flow Diagram ........................................ 1
Installation Template ............................. 1
Clear Laminate ...................................... 1
Serial Number Label .......................... Ref
CE Label ............................................... 1
Type B Label ......................................... 1
ETL Label ........................................... Ref
Umbilical Retainer Bracket (Used with
Typical Large Umbilical) ..................... AR
Refer to “Air Control Assembly”.......... Ref
Refer to “Water Control Assembly”..... Ref
Refer to “Water Pilot Valve Assy.” ....... Ref
Washer ............................................... AR
Umbilical Retainer Bracket ................ AR
Umbilical Retainer Bracket ................ AR
1/2” Plug ............................................. AR
Self-Centered Water Reguator
Assy Includes (Items 2,3, 42,&43) ..... AR
Regulator Assembly .......................... AR
Regulator Mounting Plate................... AR
Receptacle Rating Label ....................... 1
Refer to “Hardware Component”
(Not Shown) ....................................... Ref
25
26
27
28
29
30
31
32
33
122390-2
34
35
36
37
38
39
40
41
P1673
122671-00
122670-00
120236-00
029-2678-00
42
43
44
45
061-0665-00
061-0652-00
145756
122391-50
061-0845-00
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev.8/06
Page 6-62.2
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Large Junction Box, 240V
2
16
32
1
22
3
23
17
25
33
24
26
20
21
35
27
31
28
29
18
34
30
4
2
19
5
3
41
36
2
40
17
37
8
38
39
14
42
6
3
17
41
7
16
NOTE: All painted/plastic
components on this page
are Pebble Grey
9
12
15
14
12
13
11
10
NOTE: Opitional
Items may vary.
KA987509i
Applies to units with serial numbers PJ1870, PK1042, PL1572, &PM1164 thru Present
Applies to units w/ serial numbers V2200 thru Present
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Part No.
Description
122394-01
040-0010-36
117358
121971
153037
120227-00
029-2632-00
120997
040-0006-97
122087
TPW1464
TPW1486
121283
122541
029-2889-00
P14718
P507
015-2104-00
121533
156101
015-1599-00
152774-01
061-0653-00
300041
J Box Cover ........................................... 1
Screw.................................................. AR
Square Nut.......................................... AR
“U” Fastener........................................... 4
Thumbscrew .......................................... 4
3/4” Plug ............................................. AR
Power Cord Cover Plate ........................ 1
Wing Nut ................................................ 3
Screw (#6-32 x 3/8") .............................. 2
250V Switch, Modified ........................... 1
Fuse Warning Label............................... 1
7.5 Amp Fuse Label............................... 2
7.5 Amp Fuse, 3AG (Not Shown) .......... 2
Fuse Holder, 3AG .................................. 2
J Box Frame Assembly, Large ............... 1
Lockwasher, Tooth ................................. 2
Nut ...................................................... AR
Connector .............................................. 2
Jiffy Box, Electrical................................. 1
Screw..................................................... 1
120V/240V Umbilical Stub Cable........... 1
120V/240V Power Stub Cable ............... 1
Ground Identification Label.................... 2
Branch Circuit Label .............................. 1
Qty
Item
Part No.
Description
003-1191-00
003-1190-00
061-0741-00
Flow Diagram ........................................ 1
Installation Template ............................. 1
Clear Laminate ...................................... 1
Serial Number Label .......................... Ref
CE Label ............................................... 1
Type B Label ......................................... 1
ETL Label ........................................... Ref
Umbilical Retainer Bracket (Used with
Typical Large Umbilical) ..................... AR
Refer to “Air Control Assembly”.......... Ref
Refer to “Water Control Assembly”..... Ref
Refer to “Water Pilot Valve Assy.” ....... Ref
KEPS Lock Nut...................................... 3
Umbilical Retainer Bracket ................ AR
Umbilical Retainer Bracket ................ AR
1/2” Plug ............................................. AR
Self-Centered Water Reguator
Assy Includes (Items 2,3, 42,&43) ..... AR
Regulator Assembly .......................... AR
Regulator Mounting Plate................... AR
Receptacle Rating Label ....................... 1
KEPS Lock Nut...................................... 3
Refer to “Hardware Component”
(Not Shown) ....................................... Ref
25
26
27
28
29
30
31
32
122390-2
33
34
35
36
37
38
39
40
P1673
122671-00
122670-00
120236-00
029-2678-00
41
42
43
44
45
061-0665-00
061-0652-00
145756
122391-50
061-0845-00
122357
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 11/10
Page 6-62.3
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Small Junction Box, 120V
1
2
5
26
4
3
6
3
4
8
10 11
7
12
13
9
14
15
25
23
16
17
19
24
3
4
22
21
18
20
KA925700
Applies to units with “UA”, “UC”, “UK”, & “UW” serial number prefixes
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
Part No.
Description
Page
120617-50
112504
P14718
P507
152745
152149
015-2104-00
121533
300041
152774
122618
156101
153010
Cover, Small J Box................................. 1
Ground Identification Label.................... 4
Lockwasher............................................ 5
Nut ......................................................... 5
Female Ground Wire Assembly ............. 1
Refer to “Water Valve Assembly”)...... Ref
3/8” Die Cast Connector Clamp............. 2
Jiffy Box, Electrical................................. 1
Warning Label, Separate Circuit ............ 1
120V Power Stub Cable......................... 1
120V HG Plug........................................ 1
Screw..................................................... 1
Umbilical Stub........................................ 1
Item
Part No.
Description
Page
14
15
16
17
18
19
20
21
22
23
24
25
26
040-0006-97
122121
061-0845-00
122447
151846
120236
121872-1
(N.L.A.)
149730
152746
120995-00
(N.L.A.)
Screw (#6-32 x 3/8").............................. 2
Switch, Modified .................................... 1
Receptacle Rating Label ....................... 1
Cotter Pin .............................................. 2
Receptacle Assembly............................ 1
1/2” Plug Button, White ......................... 3
1” Plug Button, White ............................ 1
Chassis, Small J Box............................. 1
Thumb Screw Assembly........................ 4
Male Ground Wire Assembly................. 1
Umbilical Retainer Plate ........................ 2
Umbilical Retainer Plate ........................ 1
Refer to “Valve Block Assembly”) ....... Ref
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 8/06
Page 6-63
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Small Junction Box, 120V
NOTE: All painted/plastic
components on this page
are Pebble Grey
KA925700
Applies to units with “PJ”, “PL”, “PK”, “PM” & “V” serial number prefix
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
Part No.
Description
050-5050-50
112504
P14718
P507
152745
Cover, Small J Box................................. 1
Ground Identification Label.................... 4
Lockwasher............................................ 5
Nut ......................................................... 5
Female Ground Wire Assembly ............. 1
Refer to “Water Valve Assembly”)...... Ref
Connector .............................................. 2
Jiffy Box, Electrical................................. 1
Warning Label, Separate Circuit ............ 1
120V Power Stub Cable......................... 1
120V HG Plug........................................ 1
Screw..................................................... 1
Umbilical Stub........................................ 1
015-2104-00
121533
300041
015-1632-00
122618
156101
152772-01
Page
Item
Part No.
Description
Page
14
15
16
17
18
19
20
21
22
23
24
25
26
040-0006-97
122121
061-0845-00
122447
151846
120236-50
121872-00
050-5049-00
149730
152746
120995-2
151847
Screw (#6-32 x 3/8").............................. 2
Switch, Modified .................................... 1
Receptacle Rating Label ....................... 1
Cotter Pin .............................................. 2
Receptacle Assembly............................ 1
1/2” Plug Button, White ......................... 3
1” Plug Button, White ............................ 1
Chassis, Small J Box............................. 1
Thumb Screw Assembly........................ 4
Male Ground Wire Assembly................. 1
Umbilical Retainer Plate ........................ 2
Ground WIre Assembly ......................... 1
Refer to “Air Control Assembly”) ........ Ref
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 8/06
Page 6-63.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Accessory Power Chassis (APC),
120V & 240V
28
22
21
32
27
29
25
23
1
24
20
15
13
14
33
2
19
6
12
3
31
17
18
10
4
5
30
6
11
7
9
8
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL, PM
pebble grey
35
Note:
Light transformer found on
following pages is not
included in this assembly.
34
KA919603
Applies to units w/serial numbers PJ1000 thru PJ1869 & PK1000 thru PK1041
PL1000 thru PL1571 & PM1000 thru PM1163
Item
Part No.
(N.L.A.)
152964-01
1
2
3
4
5
6
7
8
9
10
(N.L.A.)
152971-01
• TPW1601
• TPW1602
• (N.L.A.)
• 122387-50
• TPW1681
• (N.L.A.)
• 120236-50
• 061-0845-00
• 122586
• 015-2104-00
• 122630
• TPW1459
• 152967
• 152968
11
12
13
14
•
•
•
•
•
•
•
•
119972
122410
101928
122409
Description
Qty.
120V APC Assm. (incl. items1 thru 28)
(sterling)............................................. 1
(pebble) .............................................. 1
240V APC Assm. (incl. items1 thru 31)
(sterling)............................................. 1
(pebble) .............................................. 1
• 120V APC Wiring Diagram.................. 1
• 240V APC Wiring Diagram.................. 1
• Chassis (sterling) ............................... 1
• Chassis (pebble) ................................ 1
• 120 V APC Rating Label ..................... 1
• 1/2” Plug Button (sterling) .................. 3
• 1/2” Plug Button (pebble) ................... 3
• 115V Power Rating Label.................... 1
• 120 V HG Outlet (includes screws) ..... 1
• Connector............................................ 1
• Screw (Apply Loctite* 042-0024-00) ... 3
• High Voltage Warning Label................ 2
• 120 VAC Block Assy (includes
items 11 thru 16 plus wires) ................ 1
• 240 VAC Block Assy (includes
items 11 thru 16 plus wires) ................ 1
• • 10 Pole Terminal Block ..................... 1
• • 3-Circuit Plug .................................... 1
• • Pin Terminal (not shown) .................. 3
• • 3-Circuit Receptacle ......................... 1
Item
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
Part No.
• • 101949
• • P17087
• P12479
• TPW1662
• P14718
• P14718
• P507
• P507
• 102014
•
• 105480
• 111587
• 112504
• 112504
• 015-0013-02
• 134969
• (N.L.A.)
• 122388-50
• TPW1682
• (N.L.A.)
• 122622-50
• 122358
TP1624
TP1628
117358
Description
Qty.
• • Socket Terminal (not shown) ............ 3
• • #10 Ring Terminal (not shown) ........ 2
• Nut ...................................................... 3
• Terminal Block Label........................... 1
• Lockwasher (120 VAC) ....................... 5
• Lockwasher (240 VAC) ....................... 4
• Nut (120 VAC)..................................... 5
• Nut (240 VAC)..................................... 4
• 9-Circuit Receptacle ........................... 1
• Socket Terminal (not shown) .............. 5
• Screw.................................................. 2
• Connector, 2 Circuit ............................ 2
• Ground Identification Label (120 VAC) 5
• Ground Identification Label (120 VAC) 4
• 4” Cable Tie (not shown) .................... 1
• Caution Label...................................... 1
• APC Cover (sterling) ......................... 1
• APC Cover (pebble) .............................
• 240 V APC Rating Label..................... 1
• Cover Plate (sterling)......................... 1
• Cover Plate (pebble) .......................... 1
• Nut ...................................................... 1
Model L Light Wiring Diagram ............... 1
APC ID Label ........................................ 1
Nut......................................................... 2
J-Box Frame Assm. ........................... Ref
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 5/10
Page 6-64
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Accessory Power Chassis (APC),
120V & 240V
20
19
16
18
14
17
1
15
2
3
12
9
4
13
10
11
5
8
7
Note:
Light transformer found on
following pages is not
included in this assembly.
6
DA108900i
Applies to units w/serial numbers PJ1870, PK1042, PL1572, & PM1164 thru Present
Applies to units w/ serial numbers V2200 thru Present
Item
1
2
3
4
5
6
7
8
9
Part No.
Description
Qty.
153689
153690
• 003-1280-00
• 061-0834-00
• 029-2849-00
• TPW1681
• TPW1682
• 053-0050-11
• 117358
• 040-0006-73
015-1373-01
• 015-1591-00
120V APC Assm. (incl. items1 thru 20) . 1
240V APC Assm. (incl. items1 thru 20) . 1
• Wiring Diagram (240 VAC) .................. 1
• APC ID Label ...................................... 1
• Chassis ............................................... 1
• APC Rating Label (120 VAC) .............. 1
• APC Rating Label (240 VAC) .............. 1
• Hole Plug.......................................... AR
• Nut....................................................... 2
• Screw .................................................. 2
• Terminal Block..................................... 1
• APC Plug Connector Harness............. 1
Item
10
11
12
13
14
15
16
17
18
19
20
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
041-0006-01
061-0838-00
P14718
P507
102014
111587
105480
061-0653-00
TPW1632
061-0654-00
122388-50
Qty.
Nut ...................................................... 2
Terminal Block Label........................... 1
Lockwasher......................................... 3
Nut ...................................................... 3
Receptacle (9 pin connector).............. 1
Receptacle (2 pin connector).............. 2
Screw ................................................. 2
Ground Label ...................................... 1
APC Shipping Label............................ 1
Caution Label...................................... 2
Cover .................................................. 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 5/10
Page 6-64.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Light Transformer Assembly
1
2
8
3
4
5
6
7
KA916500
Applies to units w/serial numbers PJ1000 thru PJ1869 & PK1000 thru PK 1041
PL1000 thru PL1571 & PM1000 thru PM1163
Item
Part No.
Description
Qty
1
2
3
4
153012
• 121277
• P391
• 150003
• 152490
Light Transformer Assy - 120 VAC ........ 1
• Screw .................................................. 4
• Washer................................................ 4
• Transformer, 120 VAC ......................... 1
• Strip Assembly (Studs) ....................... 2
Item
Part No.
Description
Qty
5
6
• • 116420
• 121719
7
8
• 121766
• 015-0013-02
• • Vibration Isolator ...............................4
• Transformer Spacer (Apply Instant
Adhesive #275392) ............................4
• Screw ..................................................4
• Cable Tie .............................................1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/16
Page 6-65
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Light Transformer Assembly
4
3
2
5
6
1
7
DA110900i
Applies to units w/serial numbers PJ1870, PK1042, PL1572, & PM1164 thru Present
Applies to units w/ serial numbers V2200 thru Present
Item
1
2
3
4
5
6
Part No.
Description
040-0010-150
016-0138-16
015-1506-00
122357
015-1259-02
015-0346-00
Screw .................................................... 4
Spacer ................................................... 4
Transformer 120/240 VAC ..................... 1
Nut......................................................... 4
Fuse Holder........................................... 1
Fuse (3 AG, Slo-Blo, 1.5 amp, 250V)
1
Qty
Item
Part No.
Description
7
8
9
10
11
12
061-0808-00
015-0737-17
015-0737-16
015-0737-15
015-0708-29
015-0708-28
Fuse Replacement Label .......................1
Jumper Wire (brown, 3”) - not shown.....1
Jumper WIre (brown, 7”) - not shown.....1
Jumper Wire (blue, 10”) - not shown ......1
Jumper Wire (red) - not shown ..............1
Jumper Wire (black) - not shown ...........1
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/04
Page 6-65.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Valve Block Assembly
1
NOTE:
To purchase complete valve block
assembly, identify proper configuration
and use assembly number from Table 6-1.
2
3
4
6
10
9
15 11
22
5
11
7
12
13
36
8
14
14
9
16
9
17
35
18
28
30
10
11
13
34
25
33
Description
Assembly Number
Air regulator w/pressure gauge
153000
Air regulator, water regulator w/pressure gauges
151723
Air regulator, water regulator w/o pressure gauges
(For all units except Floor Mounted Consoles)
(For Floor Mount Consoles only)
152138
153262
11
26
31
Table 6-1
20
27
32
.
19
29
21
24
23
KA923001i
Applies to units with “UA”, “UC”, “UK”, & “UW” serial number prefixes
Item
Part No.
Description
Qty
1
2
3
4
5
6
7
8
9
10
11
12
117341
117660
117339-2
117340
117348
117347
P507
117662
117352
109714
117660
145756
• 149725
13
14
15
16
17
18
19
20
21
22
122841
P16629
117349
122159
122160
P9216
117342
117338-2
109714
014-0553-00
Screw .....................................................2
Gasket....................................................2
Filter Retainer Disc ................................2
Gasket....................................................2
Water Element, Course..........................1
Air Element, Fine ...................................1
Nut .........................................................2
Plug, 1/8” Pipe .......................................2
Fitting .....................................................3
Fitting (Apply 042-0024-00, Loctite*) .....4
Gasket..................................................11
Air Regulator ..........................................1
• Repair Kit (Includes: diaphragm,
plunger, small spring, o-ring, nut) ........1
Pressure Gage .......................................2
Nipple .....................................................2
Fitting .......................................................
Label, International Air Symbol ..............1
Label, International Water Symbol .........1
Screw .....................................................2
Diaphram ...............................................1
Diaphram Cover .....................................1
Fitting .....................................................1
Barbed Fitting 3/16" x 1/8" NPT .............1
Item
Part No.
Description
Qty
23
24
25
P5708
117343
014-0176-44
26
27
28
117661
117345
014-0176-07
29
30
31
32
33
34
117344
117346
P17705
P17704
137909
145349
• 135880
35
36
37
117351
117337-2
TPW1302
38
151113
Screw..................................................... 6
Valve Stem............................................. 2
O-Ring (Coat with 185165, Super
O-Lube) ................................................. 2
O-Ring ................................................... 2
Spring .................................................... 2
O-Ring (Coat with 185165, Super
O-Lube) ................................................. 4
Valve Insert............................................ 2
Filter....................................................... 2
Flow Nut ................................................ 2
Flow Sleeve ........................................... 2
Elbow..................................................... 2
Water Regulator..................................... 1
• Repair Kit (Includes: diaphragm,
plunger, small spring, o-ring, nut)........ 1
Plug (Apply 042-0024-00, Loctite*)........ 6
Valve Block ............................................ 1
3/8” Poly Flow Connection Instruction
Sheet For Air and Water Supply (Not
Shown) .................................................. 1
Valve Block Assy Repair Kit
(Includes Items 2, 4, 5, 6, 19, 23, 24,
25, 26, 27, 28, & 29) ...........................Ref
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 8/10
Page 6-66
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Air Control Assembly
14
16
12
11
15
14
10
12
18
12
9
9
11
17
11
10
10
11
15
10
9
10
20
2
13
0
1
0
22
19
8
6
7
21
1
12
6
8
2
12
7
3
4
5
KA 957405
Applies to units with “PJ”, “PL”, “PK” & V203632 serial number prefix
Item
1
2
3
4
5
6
7
8
9
10
11
Part No.
Description
029-2480-00
Air Control Assembly (Includes Items
1 thru 24)................................................1
• Master Shutoff Valve Assembly
(Includes Items 2 thru 7)......................1
• • MSO Filter - 40 Micron......................1
• • O-Ring...............................................1
• • Filter Nut ...........................................1
• • MSO Filter Housing...........................1
• • Gasket...............................................2
• • Brass Plug (Not Used) ......................2
• Uni-Clamp............................................3
• Fitting...................................................3
• Brass Plug ...........................................5
• Gasket .................................................9
• 029-2535-00
•
•
•
•
•
•
•
•
•
•
• 053-1166-00
• 014-0176-45
• 057-0606-00
• 053-1167-00
• 117660
• 117351
117479
117352
117351
117660
Qty
Item
12
13
14
15
16
17
18
19
20
21
22
23
24
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
109714
P16629
145756
117662
050-4816-00
117349
177551
122841
120394
121275
177531
122159
002-0768-00
Qty
Barb Fitting ......................................... 5
Nipple (Apply Loctite #042-0024-00) .. 1
Air Regulator ....................................... 2
Pipe Plug............................................. 3
Regulator Mounting Plate ................... 1
Fitting .................................................. 1
Brown Tubing ...................................... 1
Round Pressure Gage ........................ 1
Warning Tag (Not Shown) ................... 1
Stop Valve ........................................... 1
Red Tubing .......................................... 1
Air Label .............................................. 1
Water Bottle Regulator..........................
(preset to 30 PSI) ................................ 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 8/08
Page 6-67
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Air Control Assembly
14
16
25
12
12
11
15
9
11
10
9
10
11
15
10
10
14
23
10
22
11
11
24
12
10
13
2
20
9
1
0
11
20
0
8
6
21
17
7
19
1
2
6
12
3
8
4
5
DA171802i
Used on Units with Serial Numbers V203633 thru Present
Item
1
2
3
4
5
6
7
8
9
10
11
12
Part No.
Description
002-1633-00
Air Control Assembly (Includes Items
1 thru 25)................................................1
• Master Shutoff Valve Assembly
(Includes Items 2 thru 8)......................1
• • MSO Filter - 40 Micron ......................1
• • O-Ring...............................................1
• • Filter Nut ...........................................1
• • MSO Filter Housing...........................1
• • Gasket...............................................2
• • Brass Plug (Not Used) ......................2
• Uni-Clamp............................................3
• Fitting...................................................3
• Brass Plug ...........................................7
• Gasket ...............................................10
• Barb Fitting .........................................4
• 029-2535-00
•
•
•
•
•
•
•
•
•
•
•
• 053-1166-00
• 014-0176-45
• 057-0606-00
• 053-1167-00
• 117660
• 117351
117479
117352
117351
117660
109714
Qty
Item
13
14
15
16
17
18
19
20
21
22
23
24
25
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P16629
145756
117662
050-4816-00
122841
120394
121275
177531
122159
014-0553-00
S059-00155
016-0980-00
002-0768-00
Qty
Nipple (Apply Loctite #042-0024-00)... 1
Air Regulator ....................................... 1
Pipe Plug............................................. 2
Regulator Mounting Plate ................... 1
Round Pressure Gage ........................ 1
Warning Tag (Not Shown) ................... 1
Stop Valve ........................................... 1
Red Tubing .......................................... 1
Air Label .............................................. 1
Barb Fittings (3/16" x 1/8" NPT) .......... 1
Tubing, Clear (5 /16") .......................... 1
Diaphragm........................................... 1
Water Bottle Air Regulator
(preset to 30 PSI) ................................ 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/12
Page 6-67.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Air Control Assembly
14
16
12
11
15
14
10
12
18
12
9
9
11
17
11
10
10
11
15
10
9
10
20
2
13
0
1
0
22
19
8
6
7
21
1
12
6
8
2
12
7
3
4
5
KA 957405
Applies to units with “PJ”, “PL”, “PK” & V203632 serial number prefix
Item
1
2
3
4
5
6
7
8
9
10
11
Part No.
Description
029-2480-00
Air Control Assembly (Includes Items
1 thru 24)................................................1
• Master Shutoff Valve Assembly
(Includes Items 2 thru 7)......................1
• • MSO Filter - 40 Micron......................1
• • O-Ring...............................................1
• • Filter Nut ...........................................1
• • MSO Filter Housing...........................1
• • Gasket...............................................2
• • Brass Plug (Not Used) ......................2
• Uni-Clamp............................................3
• Fitting...................................................3
• Brass Plug ...........................................5
• Gasket .................................................9
• 029-2535-00
•
•
•
•
•
•
•
•
•
•
• 053-1166-00
• 014-0176-45
• 057-0606-00
• 053-1167-00
• 117660
• 117351
117479
117352
117351
117660
Qty
Item
12
13
14
15
16
17
18
19
20
21
22
23
24
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
109714
P16629
145756
117662
050-4816-00
117349
177551
122841
120394
121275
177531
122159
002-0768-00
Qty
Barb Fitting ......................................... 5
Nipple (Apply Loctite #042-0024-00) .. 1
Air Regulator ....................................... 2
Pipe Plug............................................. 3
Regulator Mounting Plate ................... 1
Fitting .................................................. 1
Brown Tubing ...................................... 1
Round Pressure Gage ........................ 1
Warning Tag (Not Shown) ................... 1
Stop Valve ........................................... 1
Red Tubing .......................................... 1
Air Label .............................................. 1
Water Bottle Regulator..........................
(preset to 30 PSI) ................................ 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 8/08
Page 6-67
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Air Control Assembly
14
16
25
12
12
11
15
9
11
10
9
10
11
15
10
10
14
23
10
22
11
11
24
12
10
13
2
20
9
1
0
11
20
0
8
6
21
17
7
19
1
2
6
12
3
8
4
5
DA171802i
Used on Units with Serial Numbers V203633 thru Present
Item
1
2
3
4
5
6
7
8
9
10
11
12
Part No.
Description
002-1633-00
Air Control Assembly (Includes Items
1 thru 25)................................................1
• Master Shutoff Valve Assembly
(Includes Items 2 thru 8)......................1
• • MSO Filter - 40 Micron ......................1
• • O-Ring...............................................1
• • Filter Nut ...........................................1
• • MSO Filter Housing...........................1
• • Gasket...............................................2
• • Brass Plug (Not Used) ......................2
• Uni-Clamp............................................3
• Fitting...................................................3
• Brass Plug ...........................................7
• Gasket ...............................................10
• Barb Fitting .........................................4
• 029-2535-00
•
•
•
•
•
•
•
•
•
•
•
• 053-1166-00
• 014-0176-45
• 057-0606-00
• 053-1167-00
• 117660
• 117351
117479
117352
117351
117660
109714
Qty
Item
13
14
15
16
17
18
19
20
21
22
23
24
25
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P16629
145756
117662
050-4816-00
122841
120394
121275
177531
122159
014-0553-00
S059-00155
016-0980-00
002-0768-00
Qty
Nipple (Apply Loctite #042-0024-00)... 1
Air Regulator ....................................... 1
Pipe Plug............................................. 2
Regulator Mounting Plate ................... 1
Round Pressure Gage ........................ 1
Warning Tag (Not Shown) ................... 1
Stop Valve ........................................... 1
Red Tubing .......................................... 1
Air Label .............................................. 1
Barb Fittings (3/16" x 1/8" NPT) .......... 1
Tubing, Clear (5 /16") .......................... 1
Diaphragm........................................... 1
Water Bottle Air Regulator
(preset to 30 PSI) ................................ 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/12
Page 6-67.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Air Control Assembly
14
15
13
16
12
11
1
20
2
1
0
9
10
0
17 8
19
18
6
7
6
2
3
4
5
DA112301ii
Applies to units with “PJ”, “PL”, “PK”, “PM” & V203632 serial number prefix
Item
Part No.
Description
029-2663-00
Air Control Assembly (Includes Items
1 thru 19) ............................................... 1
• Master Shutoff Valve Assembly
(Includes Items 2 thru 7) ..................... 1
• • MSO Filter - 40 Micron ..................... 1
• • O-Ring .............................................. 1
• • Filter Nut ........................................... 1
• • MSO Filter Housing .......................... 1
• • Gasket .............................................. 2
• • Brass Plug (Not Used) ...................... 2
• Nipple .................................................. 1
1
• 029-2535-00
2
3
4
5
6
7
8
•
•
•
•
•
•
•
• 053-1166-00
• 014-0176-45
• 057-0606-00
• 053-1167-00
• 117660
• 117351
P16629
Qty
Item
9
10
11
12
13
14
15
16
17
18
19
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
122841
117352
117351
117660
117349
109714
145756
117662
042-0024-00
121275
122159
Qty
Round Pressure Gage ........................ 1
Fitting .................................................. 3
Brass Plug .......................................... 5
Gasket ................................................ 9
Fitting .................................................. 1
Barb Fitting ........................................ 5
Air Regulator....................................... 2
Pipe Plug ............................................ 3
Medium Stregth Adhesive................ AR
Stop Valve........................................... 1
Air Label.............................................. 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 11/05
6-67.2
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Air Control Assembly
7
9
10
7
19
11
12
8
6
2
20
14
16
13
0
1
0
18
8
6
15
7
17
1
8
2
12
3
4
5
DA171701ii
Used on Units with Serial Numbers V203633 thru V596886
Item
Part No.
Description
029-2663-00
Air Control Assembly (Includes Items
1 thru 19)............................................... 1
• Master Shutoff Valve Assembly
(Includes Items 2 thru 7)..................... 1
• • MSO Filter - 40 Micron ..................... 1
• • O-Ring.............................................. 1
• • Filter Nut........................................... 1
• • MSO Filter Housing.......................... 1
• • Gasket.............................................. 5
• • Brass Plug (Not Used) ..................... 2
• Uni-Clamp........................................... 1
1
• 029-2535-00
2
3
4
5
6
7
8
•
•
•
•
•
•
•
• 053-1166-00
• 014-0176-45
• 057-0606-00
• 053-1167-00
• 117660
• 117351
117479
Qty
Item
9
10
11
12
13
14
15
16
17
18
19
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
117352
145756
014-0553-00
109714
P16629
122841
122159
016-0980-00
121275
177531
S059-00155
Qty
Fitting .................................................. 3
Air Regulator ....................................... 1
Barbed Fitting (3/16" x 1/8" NPT ......... 1
Barb Fitting ......................................... 2
Nipple (Apply Loctite #042-0024-01).. 1
Pressure Gage ................................... 1
Air Label .............................................. 1
Diaphragm........................................... 1
Stop Valve ........................................... 1
Tubing, Red (1/8") ............................ AR
Tubing, Clear" (5/16" ........................ AR
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 10/08
6-67.3
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Air Control Assembly
Asepsis Carts
Duo & Assistant’s
5
4
2
3
15
1
9
6
10
11
8
12
7
11
6
13
20
20
0
0
14
6
22
11
00
7
7
6
DA207600i
Used on Units with Serial Numbers V596887 thru Present
Item
Part No.
Description
029-4622-00
Air Control Assembly (Includes Items
1 thru 15)................................................1
• Master Shutoff Valve Assembly
(Includes Items 2 thru 7 & 11) .............1
• • MSO Filter - 40 Micron ......................1
• • O-Ring...............................................1
• • Filter Nut ...........................................1
• • MSO Filter Housing...........................1
• • Gasket...............................................5
1
• 029-2535-00
2
3
4
5
6
•
•
•
•
•
•
•
•
•
•
053-1166-00
014-0176-45
057-0606-00
053-1167-00
117660
Qty
Item
7
8
9
10
11
12
13
14
15
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•117351
117352
145756
014-0553-00
109714
P16629
122841
122159
014-0657-00
Qty
•Brass Plug (1/8" pipe) ....................... 2
Fitting, T-Cross .................................... 1
Air Regulator ....................................... 1
Barbed Fitting (3/16" x 1/8" NPT ......... 1
Barb Fitting (#10-32 x 1/16") .............. 2
Nipple (Apply Loctite #042-0024-01).. 1
Pressure Gage ................................... 1
Air Label .............................................. 1
Fitting, Compression 3/8" O.D. ............ 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev.
6-67.4
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Air Control Assembly
14
15
13
16
12
11
1
20
2
1
0
9
10
0
17 8
19
18
6
7
6
2
3
4
5
DA112301ii
Applies to units with “PJ”, “PL”, “PK”, “PM” & V203632 serial number prefix
Item
Part No.
Description
029-2663-00
Air Control Assembly (Includes Items
1 thru 19) ............................................... 1
• Master Shutoff Valve Assembly
(Includes Items 2 thru 7) ..................... 1
• • MSO Filter - 40 Micron ..................... 1
• • O-Ring .............................................. 1
• • Filter Nut ........................................... 1
• • MSO Filter Housing .......................... 1
• • Gasket .............................................. 2
• • Brass Plug (Not Used) ...................... 2
• Nipple .................................................. 1
1
• 029-2535-00
2
3
4
5
6
7
8
•
•
•
•
•
•
•
• 053-1166-00
• 014-0176-45
• 057-0606-00
• 053-1167-00
• 117660
• 117351
P16629
Qty
Item
9
10
11
12
13
14
15
16
17
18
19
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
122841
117352
117351
117660
117349
109714
145756
117662
042-0024-00
121275
122159
Qty
Round Pressure Gage ........................ 1
Fitting .................................................. 3
Brass Plug .......................................... 5
Gasket ................................................ 9
Fitting .................................................. 1
Barb Fitting ........................................ 5
Air Regulator....................................... 2
Pipe Plug ............................................ 3
Medium Stregth Adhesive................ AR
Stop Valve........................................... 1
Air Label.............................................. 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 11/05
6-67.2
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Air Control Assembly
7
9
10
7
19
11
12
8
6
2
20
14
16
13
0
1
0
18
8
6
15
7
17
1
8
2
12
3
4
5
DA171701ii
Used on Units with Serial Numbers V203633 thru V596886
Item
Part No.
Description
029-2663-00
Air Control Assembly (Includes Items
1 thru 19)............................................... 1
• Master Shutoff Valve Assembly
(Includes Items 2 thru 7)..................... 1
• • MSO Filter - 40 Micron ..................... 1
• • O-Ring.............................................. 1
• • Filter Nut........................................... 1
• • MSO Filter Housing.......................... 1
• • Gasket.............................................. 5
• • Brass Plug (Not Used) ..................... 2
• Uni-Clamp........................................... 1
1
• 029-2535-00
2
3
4
5
6
7
8
•
•
•
•
•
•
•
• 053-1166-00
• 014-0176-45
• 057-0606-00
• 053-1167-00
• 117660
• 117351
117479
Qty
Item
9
10
11
12
13
14
15
16
17
18
19
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
117352
145756
014-0553-00
109714
P16629
122841
122159
016-0980-00
121275
177531
S059-00155
Qty
Fitting .................................................. 3
Air Regulator ....................................... 1
Barbed Fitting (3/16" x 1/8" NPT ......... 1
Barb Fitting ......................................... 2
Nipple (Apply Loctite #042-0024-01).. 1
Pressure Gage ................................... 1
Air Label .............................................. 1
Diaphragm........................................... 1
Stop Valve ........................................... 1
Tubing, Red (1/8") ............................ AR
Tubing, Clear" (5/16" ........................ AR
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 10/08
6-67.3
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Air Control Assembly
7
9
10
7
19
11
12
8
6
2
20
14
16
13
0
1
0
18
8
6
15
7
17
1
8
2
12
3
4
5
DA171701ii
Used on Units with Serial Numbers V203633 thru V596886
Item
Part No.
Description
029-2663-00
Air Control Assembly (Includes Items
1 thru 19)............................................... 1
• Master Shutoff Valve Assembly
(Includes Items 2 thru 7)..................... 1
• • MSO Filter - 40 Micron ..................... 1
• • O-Ring.............................................. 1
• • Filter Nut........................................... 1
• • MSO Filter Housing.......................... 1
• • Gasket.............................................. 5
• • Brass Plug (Not Used) ..................... 2
• Uni-Clamp........................................... 1
1
• 029-2535-00
2
3
4
5
6
7
8
•
•
•
•
•
•
•
• 053-1166-00
• 014-0176-45
• 057-0606-00
• 053-1167-00
• 117660
• 117351
117479
Qty
Item
9
10
11
12
13
14
15
16
17
18
19
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
117352
145756
014-0553-00
109714
P16629
122841
122159
016-0980-00
121275
177531
S059-00155
Qty
Fitting .................................................. 3
Air Regulator ....................................... 1
Barbed Fitting (3/16" x 1/8" NPT ......... 1
Barb Fitting ......................................... 2
Nipple (Apply Loctite #042-0024-01).. 1
Pressure Gage ................................... 1
Air Label .............................................. 1
Diaphragm........................................... 1
Stop Valve ........................................... 1
Tubing, Red (1/8") ............................ AR
Tubing, Clear" (5/16" ........................ AR
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 10/08
6-67.3
Printed in U.S.A.
Return To Table Of Contents
Air Control Assembly
Asepsis Carts
Duo & Assistant’s
SECTION VI
PARTS LIST
5
4
2
3
15
1
9
6
10
11
8
12
7
11
6
13
20
0
14
6
2
1
0
7
7
6
DA207600i
Used on Units with Serial Numbers V596887 thru Present
Item
Part No.
Description
029-4622-00
Air Control Assembly (Includes Items
1 thru 15)................................................1
• Master Shutoff Valve Assembly
(Includes Items 2 thru 7 & 11) .............1
• • MSO Filter - 40 Micron ......................1
• • O-Ring...............................................1
• • Filter Nut ...........................................1
• • MSO Filter Housing...........................1
• • Gasket...............................................5
1
• 029-2535-00
2
3
4
5
6
•
•
•
•
•
•
•
•
•
•
053-1166-00
014-0176-45
057-0606-00
053-1167-00
117660
Qty
Item
7
8
9
10
11
12
13
14
15
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•117351
117352
145756
014-0553-00
109714
P16629
122841
122159
014-0657-00
Qty
•Brass Plug (1/8" pipe) ....................... 2
Fitting, T-Cross .................................... 1
Air Regulator ....................................... 1
Barbed Fitting (3/16" x 1/8" NPT ......... 1
Barb Fitting (#10-32 x 1/16") .............. 2
Nipple (Apply Loctite #042-0024-01).. 1
Pressure Gage ................................... 1
Air Label .............................................. 1
Fitting, Compression 3/8" O.D. ............ 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev.
6-67.4
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Water Valve Assembly
KA919800
Applies to units with “UA”, “UC”, “UK”, & “UW” serial number prefixes
Item
Part No.
Description
Qty
1
2
3
4
5
6
7
109714
117660
120959
118790
118789
117343
014-0176-44
8
117661
9
117345
Fitting ..................................................... 1
Gasket ................................................... 1
Screw..................................................... 4
Valve Cap .............................................. 1
Diaphragm ............................................. 1
Valve Stem............................................. 1
O-Ring (Coat with 185165, Super
O Lube).................................................. 1
O-Ring (Coat with 185165, Super
O Lube).................................................. 1
Valve Spring........................................... 1
Item
Part No.
Description
Qty
10
014-0176-07
11
12
117344
121084
13
14
053-1711-00
117662
15
100740
16
152706
O-Ring (Coat with 185165, Super
O Lube) ................................................. 2
Valve Insert ........................................... 1
Fitting, Male Connector (Apply
042-0024-00, Loctite*............................ 1
Water Valve Housing ............................. 1
1/2” Pipe Plug (Apply 042-0024-00,
Loctite*) ................................................. 1
Fitting, Male Connector (Apply
042-0024-00, Loctite*)........................... 1
Water Saver Block Repair Kit
(Includes Items 5,6,7,8,9,10,11)............ 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 8/10
Page 6-68
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Water Valve Assembly
Hardware Kit is for Large and
Small J Boxes (Large J Box is
shown).
18
16
15
10
15
13
18
8
1
20
2
1
0
11
17
9
12
14
0
6
19
7
6
7
2
3
4
5
KA957501
Used on Units with “PJ”, “PL”, “PK”, “PM” serial number prefix & V596886
Item
Part No.
Description
002-1722-00
Water Control Assembly (Includes Items
1 thru 19) ............................................... 1
• Master Shutoff Valve Assembly
(Includes Items 2 thru 7) ..................... 1
• • MSO Filter - 40 Micron ..................... 1
• • O-Ring .............................................. 1
• • Filter Nut ........................................... 1
• • MSO Filter Housing .......................... 1
• • Gasket .............................................. 2
• • Brass Plug (Only One Used) ............ 2
• Nipple (Apply Loctite* #042-0024-00) . 1
1
• 029-2535-00
2
3
4
5
6
7
8
•
•
•
•
•
•
•
• 053-1166-00
• 014-0176-45
• 057-0606-00
• 053-1167-00
• 117660
• 117351
P16629
Qty
Item
9
10
11
12
13
14
15
16
17
18
19
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
145349
117662
122841
117352
117479
117477
117660
109714
177531
117351
122160
Qty
Water Regulator.................................. 1
Pipe Plug ............................................ 1
Round Pressure Gage ........................ 1
Fitting .................................................. 1
Uni-Clamp........................................... 1
Barb “T” Fitting ................................... 1
Gasket ................................................ 3
Barb Fitting ........................................ 1
Red Tubing.......................................... 1
Brass Plug .......................................... 1
Water Label ........................................ 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev.10/13
Page 6-68.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Water Valve Assembly
Asepsis Carts
Duo & Assistant’s
Apply 042-0024-00 adhesive,
medium strength, to all pipe
threads.
1
4
3
2
4
3
3
2
2
3
5
5
6
DA207700i
Used on Units with Serial Numbers V596887 thru Present
Item
1
2
3
Part No.
Description
029-4624-00
Water Control Assembly (Includes Items
1 thru 7) ................................................. 1
Water Regulator .................................... 1
Plug, Brass (#10-32).............................. 4
Gasket ................................................... 6
145349
117351
117660
Qty
Item
4
5
6
7
Part No.
Description
Qty
117349
117352
117662
042-0024-00
Barbed Fitting (#10-32 x 1/8") ................2
Fitting, T-Cross .......................................2
Plug (1/8" pipe)
2
Adhesive (Not Shown) ........................AR
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev.
Page 6-68.2
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Junction Box Hardware Kit
17
2
9 14
16
1
3
10
15
11
13
4
12
5
6
7
KA919901
Applies to units with “UA”, “UC”, “UK”, & “UW” serial number prefixes
Item
Part No.
Description
1
2
3
4
5
6
7
106009
015-2104-00
121275
105547
111506
153016
• 122427
8
• TPW1619
Lag Bolt.................................................. 4
Connector .............................................. 1
Stop Valve.............................................. 2
Waste Elbow .......................................... 1
Adapter .................................................. 1
Poly Fitting Kit ........................................ 1
• 3/8” Poly Tube Fitting (Apply
042-0024-00, Thread Sealant) ............ 2
• No Longer Available Fitting Installation
Instructions (NotShown)...................... 1
Water Master Valve Assembly ............... 1
• Fitting .................................................. 1
• Pipe Plug (Apply 042-0024-00,
Thread Sealant) .................................. 1
• Tee ...................................................... 1
9
10
11
153353
• 123050
• 117662
12
• 117477
Qty
Item
Part No.
Description
Qty
13
14
15
• 117479
• 123049
• 137909
16
17
• 117660
• 117351
18
19
117349
117479
20
21
22
23
117480
117660
P9331
P9995
• Uni-Clamp, 1/8” O.D. Tube .................. 4
• 2-Way N.C. Pilot Operated Valve ........ 1
• Elbow (Apply 042-0024-00,
Thread Sealant) .................................. 1
• Gasket ................................................ 2
• Plug (Apply 042-0024-00,
Thread Sealant) .................................. 2
Fitting (Not Shown)................................ 2
Uni-Clamp, 1/8” O.D. Tube
(Not Shown) ........................................ 10
1/8” Sleeve (Not Shown) ....................... 5
Gasket (Not Shown) .............................. 5
Wire Nut, Large Yellow (Not Shown) ..... 3
Wire Nut, Small Grey (Not Shown)........ 4
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 11/12
Page 6-69
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Quick Clean Standard Syringe &
Quick Clean Continental Syringe
The 120796 is the standard syringe supplied
with the International Delivery units.
The 120795 is the standard syringe supplied
with the Asepsis 21 Delivery units.
2
4
5
3
Standard
12
7
6
13
1
11
8
14
18
15
17
10
16
19
20
7
21
Continental
9
KA926200
Item
1
2
3
4
5
6
7
8
9
10
Part No.
Description
120795
120796
• 120514
• 016-1029-00
Quick Clean Standard Syringe ......... Ref
Quick Clean Continental Syringe ..... Ref
• Syringe Tip .......................................... 1
• Tip Adapter Assembly (DCI# 3065)
(Includes Item 3) ................................. 1
• • Tip Collar .......................................... 1
• O-Ring (Pkg of 12) (DCI# 2255).......... 1
• O-Ring (Pkg of 12) (DCI# 2202).......... 1
• Spring, Tip Adapter (DCI# 9677)......... 1
• Syringe Body....................................... 1
• Pin, Tip Adapter (DCI#9659)............... 1
• Handle, Syringe (DCI# 3491) .............. 1
• Pin [Standard (DCI# 9648)] ................ 1
Pin [Continental (DCI# 9651)] ............. 1
•
•
•
•
•
•
•
•
•
016-0991-00
016-0991-04
016-0989-00
016-1030-00
016-1031-00
016-0988-00
Quantity
Item
Part No.
Description
11
12
• 016-1032-00
• 152055
13
14
15
16
17
18
19
20
21
•
•
•
•
•
•
•
•
• Spring, Syringe Button (DCI# 9670) ... 1
• Button Cartridge Kit (Includes Items
13 Thru 18) Note: This kit Includes
Two 120903 Button Cartridges ........... 1
• • Button Valve (DCI# 3085)................. 2
• • Valve................................................. 2
• • O-Ring (Pkg of 12) (DCI# 2203)....... 2
• • O-Ring (Pkg of 12) (DCI# 2212)....... 2
• • Retaining Ring (DCI# 9601) ............. 2
• • O-Ring (Pkg of 12) (DCI# 2211)....... 2
• Gasket, Sealing .................................. 2
• Barb Fitting (Pkg of 10) (DCI# 0084) .. 2
Syringe Tubing (Refer to appropriate
Asepsis 21 or International Syringe
Tubing page ..................................... Ref
• 016-1033-00
•
• 016-0991-02
• 016-0991-03
• 016-0990-00
• 016-0991-01
117660
Quantity
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 1/06
Page 6-70
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
AutoClavable Standard Syringe &
AutoClavable Continental Syringe
KA932600
Item
Part No.
Description
121143
121279
AutoClavable Standard Syringe ......... Ref
AutoClavable Continental Syringe ..... Ref
Syringe Tip (DCI# 3060) ........................ 1
1
2
3
4
5
6
7
8a
8b
9a
9b
10
11
12
13
•
Quantity
Tip, AutoClavable Adapter Assy
(DCI# 3071) (Includes Item 4)............. 1
• Tip Collar............................................. 1
O-Ring (Pkg of 12) (DCI# 2252) ............ 1
O-Ring (Pkg of 12) (DCI# 2259) ............ 1
Spring, Tip Adapter (DCI# 9677) ........... 1
Syringe Body, AutoClavable Standard ... 1
Syringe Body, AutoClavable Continental1
Button Cartridge Kit, Standard
(DCI# 3077) (Includes Items 23
Thru 26)............................................... 2
Button Cartridge Kit (DCI# 3086)
(Includes Items 27 Thru 32) ................ 2
016-1030-00 Pin, Tip Adapter (DCI# 9659) ................ 1
016-1032-00 Spring, Syringe Button (DCI# 9670)
(Applies to Continental Syringe Only) . 1
Pin, Syringe Button (DCI# 9651)
(Applies to Continental Syringe Only) . 1
Handle, AutoClavable
Syringe (DCI# 3074) ........................... 1
Item
Part No.
14
15
16
17
18
19
20
21
22
• 016-0991-02
•
•
•
•
•
23
24
25
26
27
28
29
30
31
32
Description
Quantity
Quick Disconnect Assy (DCI# 3320)
(Includes Items 15 Thru 21)................ 1
• O-Ring (Pkg of 12) (DCI# 2203) ......... 1
• O-Ring (Pkg of 12) (DCI# 2260) ......... 1
• Quick Disconnect Housing.................. 1
• Pin....................................................... 1
• O-Ring (Pkg of 12) (DCI# 2230) ......... 2
• Quick Disconnect Piston..................... 1
Tubing Sleeve (DCI# 3036) ................... 1
Syringe Tubing (Refer to appropriate
Asepsis 21 or International Syringe
Tubing page .................................... Ref
Button .................................................... 2
Spring, Syringe Button (DCI#9674)....... 1
O-Ring (Pkg of 12) (DCI#2266)............. 1
Valve Core (Pkg of 10) (DCI# 3090)...... 1
Retaining Ring (DCI# 9601) .................. 1
O-Ring (Pkg of 12) (DCI# 2242)............ 1
Valve...................................................... 1
O-Ring (Pkg of 12) (DCI# 2264)............ 1
Button Cartridge .................................... 1
O-Ring (Pkg of 12) (DCI# 2263)............ 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 5/05
Page 6-71
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Heated Syringe Power SupplyExternally Mounted
1
2
3
4
5
26
10
25
6
7
24
23
8
11
9
14
12
13
16
20
15
21
22
27
18
19
17
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK
pebble grey
KA930101
Item
Part No.
Description
1
TP1102
115 V Power Supply Label (Used on
115V Units) ......................................... 1
230 V Power Supply Label (Used on
230V Units........................................... 1
Cover (sterling) ..................................... 1
Cover (pebble) ...................................... 1
1/2 Amp Fuse (Used on 115V Units ...... 2
1/4 Amp Fuse (Used on 230V Units) ..... 2
Screw..................................................... 2
Fuse Holder ........................................... 1
Label Ground Identification.................... 1
Nut ......................................................... 1
Lockwasher............................................ 1
Pressure Switch (Includes Items
10 and 11) ........................................... 1
• Nut....................................................... 1
• Lockwasher ......................................... 1
Connector, Female ................................ 1
Uni-Clamp, 1/8” O.D............................... 8
TP1101
2
3
4
5
6
7
8
9
10
11
12
13
(N.L.A.)
120491-50
120840
120499
103205
120498
112504
P507
P14718
120769
•
•
120475
117479
Quantity
Item
Part No.
Description
14
15
16
17
117477
Fitting, Tee............................................. 1
Refer to “Internal Tubing”) .................. Ref
Connector.............................................. 1
Power Cord, 115 VAC............................ 1
Power Cord, 230 VAC............................ 1
Chassis (sterling) ................................. 1
Chassis (pebble)................................... 1
Screw .................................................... 4
Screw (#6-32 x 3/8").............................. 2
Nut......................................................... 2
Lockwasher ........................................... 2
Transformer Assembly, 115 VAC ........... 1
Transformer Assembly, 230 VAC ........... 1
Connector, 2 Circuit............................... 2
Female Connector (Not Shown)............ 4
Wire Connector ..................................... 1
Syringe Adapter .................................... 2
Cord Clip (Not Shown) .......................... 2
18
19
20
21
22
23
24
25
26
27
28
015-2104-00
151854
151855
(N.L.A.)
120490-50
119905
040-0006-97
P1829
P11777
151853
151852
111587
120475
117244
151895
109191
Quantity
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev.12/09
Page 6-72
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Heated Syringe Power Supply Internally Mounted
1
6
2
2
5
3
8
7
11
12
4
Console
APC
18
10
15
16
20
13
19
14
17
9
23
KA930601i
Item
Part No.
1
2
3
4
5
6
103152
101949
122753
104692
7
8
122357
153029
153030
153031
9
153032
10
• 120769
Description
Quantity
Syringe (Refer to “Quick Clean or
AutoClavable Syringe”) ................... Ref
Receptacle............................................. 4
Terminal Socket ..................................... 4
Wire Connector...................................... 2
Plug, Two Socket ................................... 1
Syringe (Refer to “Quick Clean or
AutoClavable Syringe”) ................... Ref
Nut ......................................................... 2
Transformer Assembly, 115 VAC ........... 1
Transformer Assembly, 240 VAC ........... 1
Pressure Switch & Fuse Assy, 115 VAC
(Includes Items 10 Thru 19) ................ 1
Pressure Switch & Fuse Assy, 240 VAC
(Includes Items 10 Thru 19) ................ 1
• Pressure Switch Assembly (Includes
Items 11 and 12) ................................. 1
Item
Part No.
Description
11
12
13
14
15
16
•
•
•
•
•
•
•
•
•
•
•
•
17
18
19
••
••
• 120840
• 015-0346-00
P5788
015-0013-02
117479
061-0808-02
061-0808-01
20
21
22
23
•
•
117477
015-0315-05
015-1259-02
Quantity
• Nut.................................................... 1
• Lockwasher ...................................... 1
Fitting, Tee .......................................... 1
Refer to “Internal Tubing”)................ Ref
Terminal .............................................. 3
Fuse Holder, 3AG (Includes Items
17 and 18)........................................... 1
• • Fuse Holder Cap .............................. 1
• • Fuse Holder Nut ............................... 1
• Fuse, 1/2 Amp (For 115 VAC Units) ... 1
• Fuse, 1/4 Amp (For 240 VAC Units) ... 1
Screw .................................................... 2
Cable Tie (Not Shown)...........................1
Uni-Clamp, 1/8” O.D. (Not Shown) ........ 2
115V Fuse Replacement Label
230V Fuse Replacement Label ............. 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 1/10
Page 6-73
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Foot Control Assembly
KA916400
Applies to units with “UA”, “UC”, “UK”, & “UW” serial number prefixes
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Part No.
Description
151608
Qty
Foot Control, (does not include
items 18 thru 38)................................ 1
152059
Foot Control w/Water On/Off Toggle
(does not include items 20 thru 27). 1
151769
Foot Control w/Water On/Off Toggle
and Chip Air Pushbutton ..................... 1
•
• Foot Control Cover (DCI#6070) .......... 1
•
• Foot Control Ring, Gray (DCI#6046) ... 1
•
• Base Plate........................................... 1
•
• Bumper Pad Kit (DCI#8070)
(Standard Foot Control Uses QTY. 8,
Foot Control w/Switches Uses
QTY. 10)........................................ pkg-28
•
• Screw (DCI#9746)............................... 4
•
• Valve.................................................... 1
••
• • • Retaining Ring (DCI#9602) ............ 1
•••
• • Stem (DCI#6096) [includes item 11]. 1
••
• • Return Ring (DCI#6033)................... 1
••
• • Spring (DCI#6042)............................ 1
• • 016-1034-00 • • O-Ring Kit (DCI#2205)
(Unit Uses 2)............................ pkg-12
••
• • Spool (DCI#6022) ............................. 1
• • 016-1035-00 • • O-Ring Kit (DCI#2210)
(Unit Uses 1)................................. pkg-12
•
• Screw (DCI#9741)............................... 2
•
• Screw (DCI#9750)............................... 4
•
• Switch Housing, 1-Hole Toggle
(DCI#6052).......................................... 1
•
• Switch Housing, 2-Hole (DCI#6053)
(Shown)............................................... 1
Item
Part No.
Description
20
21
22
23
24
25
26
27
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
28
•••
29
30
31
32
33
34
35
36
37
38
•
•
•
•
•
•
•
•
•
•
•
•
• C5970
•
•
•
•
•
•
•
• C5970
•
•
•
•
••
39
152463
Qty
Chip Blower Button Assy (DCI#6093). 1
• Actuator Button (DCI#6056)............. 1
• Spring (DCI#6034) ........................... 1
• Spring Clip (DCI#6095) .................... 1
• Set Screw (DCI#9789) ..................... 1
• Pin (DCI#0911) ................................ 1
• Valve Tower (DCI#6048) .................. 1
• Micro-Valve 2-Way, Chip Air
(DCI#6003) ......................................... 1
• • • Stem w/O-Rings, 2-Way
(DCI#6038) .................................... 1
• Wet/Dry Toggle Assy (DCI#6132)....... 1
• • Toggle, Wet/Dry (DCI#6049) ............ 1
• • Spring Cap (DCI#6054).................... 1
• • Spring (DCI#6036) ........................... 1
• • Spring Clip (DCI#6095) .................... 1
• • Pin (DCI#0911) ................................ 1
• • Set Screw (DCI#9789) ..................... 1
• • Valve Tower (DCI#6048) .................. 1
• • Micro-Valve 2-Way, (DCI#6004) ....... 1
• • • Stem w/O-Rings, 2-Way
(DCI#6039) .................................... 1
Standard Repair Kit (Includes items
10, 12, 13, 14, & 16) (DCI#6161)........ 1
Wet/Dry Repair Kit (Includes items 10,
13, 14, 16, 30, 31, & 34) ..................... 1
Chip Air Repair Kit (Includes items 10,
12, 13, 14, 16, & 22) (DCI#6162)........ 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 3/08
Page 6-74
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Foot Control Assembly
1
2
5
4
19
45
31
32
33
30
10
23
35
24
36
12
22
34
44
13
9
42
20
25
41
40
14
15
39
6
26
37
43
42
11
21
16
27
38
NOTE: All painted/plastic
components on this page
are Pebble Grey
7
28
29
8
18
17
KA916400
Applies to units with “PJ”, “PK”, “PM” & V203807 serial number prefix
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Part No.
Description
152059-01
Qty
Foot Control w/Water On/Off Toggle
(Includes items 4 thru 29 & 39 thru 45) 1
151769-01
Foot Control w/Water On/Off Toggle
and Chip Air Pushbutton (Includes items
(Includes items 4 thru 38) ...................... 1
152463
Wet/Dry Repair Kit (Includes items 10,
13, 14, 16, 21, 22, & 25)...................... 1
Chip Air Repair Kit (Includes items 10,
12, 13, 14, 16, & 33) (DCI#6162) ........ 1
•
• Foot Control Cover (DCI#6070) .......... 1
•
• Foot Control Ring, Gray (DCI#6046) ... 1
•
• Base Plate........................................... 1
•
• Bumper Pad Kit (DCI#8070)
(Standard Foot Control Uses QTY. 8,
Foot Control w/Switches Uses
QTY. 10)........................................ pkg-28
•
• Screw (DCI#9746)............................... 4
•
• Valve.................................................... 1
••
• • Retaining Ring (DCI#9602) ............ 11
•••
• • Stem (DCI#6096) [includes item 11]. 1
••
• • Return Ring (DCI#6033)................... 1
••
• • Spring (DCI#6042)............................ 1
• • 016-1034-00 • • O-Ring Kit (DCI#2205)
(Unit Uses 2)............................ pkg-12
••
• • Spool (DCI#6022) ............................. 1
• • 016-1035-00 • • O-Ring Kit (DCI#2210)
(Unit Uses 1)................................. pkg-12
•
• Screw (DCI#9741)............................... 2
•
• Screw (DCI#9750)............................... 4
Item
Part No.
Description
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
38
39
40
41
42
43
44
45
•
•
•
•
•
•
•
•
•
•
•
• C5970
•
•
•
•
••
•
•
• C5970
•
•
•
•
••
016-1036-00
117660
117351
•
•
•
•
•
•
•
•
Qty
Single Switch Housing, (DCI#6052) ... 1
Dual Switch Housing (DCI#6053) ....... 1
Wet/Dry Toggle Assy (DCI#6132)....... 1
• Toggle, Wet/Dry (DCI#6049) ............ 1
• Spring Cap (DCI#6054).................... 1
• Spring (DCI#6036) ........................... 1
• Spring Clip (DCI#6095) .................... 1
• Pin (DCI#0911) ................................ 1
• Set Screw (DCI#9789) ..................... 1
• Valve Tower (DCI#6048) .................. 1
• Micro-Valve 2-Way, (DCI#6004) ....... 1
• • Stem w/O-Rings (DCI#6039) ......... 1
Chip Blower Button Assy (DCI#6093). 1
• Actuator Button (DCI#6056)............. 1
• Spring (DCI#6034) ........................... 1
• Spring Clip (DCI#6095) .................... 1
• Set Screw (DCI#9789) ..................... 1
• Pin (DCI#0911) ................................ 1
• Valve Tower (DCI#6048) .................. 1
• Micro-Valve 2-Way, Chip Air
(DCI#6003) ......................................... 1
• • Stem w/O-Rings (DCI#6038) ......... 1
Diaphragm [DCI#9012] .............. pkg-10
Stem with O-Rings [DCI#6098]........... 1
Valve [DCI#
] ................................. 1
Screw [DCI#
]................................ 2
Spring [DCI#9029] .............................. 1
Gasket ................................................ 1
Brass Plug .......................................... 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 3/08
Page 6-74.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Foot Control Assembly
1
4
2
5
NOTE: All painted/plastic
components on this page
are Pebble Grey
3
6
20
7
8
19
21
9
18
10
11
11
13
12
NOTE:
Specify the length of the
tubing (053-1709-00) when
ordering. It is not part of the
002-1001 kit.
NOTE: DP #’s are for Parts
Warehouse part numbers.
13
1/8 OR
5/16"
Clear
1/8
GN
5/16"
Clear
w/ Dash
1/8
BN
22
(Chip Air)
17
Specify Length
When Ordering
16
15
14
DA173602i
Applies to units from V203808 serial number to Present
Item
Part No.
1
2
002-0934-00
002-0934-02
3
4
5
•
•
•
6
7
8
9
10
11
12
•
•
•
•
•
•
•
Description
Qty
Foot Ctl. w/Water On/Off Toggle
(Includes items 3 thru 19)
(3 Port).......................................................1
Foot Control w/Water On/Off Toggle
and Chip Air Pushbutton
(Includes) (items 3 thru 21)........................1
• Shroud, Valve (DP# R-F1215-2MK) ........1
• Dome (DP# R-F1200-2) ..........................1
• Retainer Ring, Dome
(DP# R-F1200-4MK)................................1
• Spring, Dome (DP# R-F1200-3B) ...........1
• Valve Stem (DP# R-F1200-3C) ..............1
• Spring, Conical (DP# R-F1210 -3A) ........1
• Valve, (DP) ..............................................1
• Base Plate ...............................................1
• O-ring (DP# O-2008.1) ........................2
• Cartridge, Valve Stem
(DP# R-F1200-3D)...............................2
Item
Part No.
13
14
15
16
17
18
19
•
•
•
•
•
•
• 016-1079-00
20
21
22
23
24
25
26
Description
Qty
• O-ring ........................(DP# O-2012.1)1
• Screw, #6 x 1/2" (DP# RF1024) .......... 4
• Foot, Rubber (DP# R-F1200-5) ........... 5
• Screw #4-40 x 5/16" (DP# RF1025) .... 2
• Screw #4 x 1/2" (DP# RF1081) ........... 4
• Barbed Fitting 3/16" (DP# P-1898)...... 2
• Wet / Dry Toggle Assy.
(DP# F-1231- MK) ............................... 1
• • 016-1078-00 • • Toggle (DP# V-1550-MK) .................. 1
•
• Chip Air Button Assy.
(DP# F-1232 MK) ................................ 1
053-1709-00
Tubing, Foot Control
(Specify Length)............................... AR
002-1001-00
Kit, Foot Control Connections
(Not shown)(includes items 24, 25, 26) . 1
• 117479
• Uni-clamp (1/8" O.D.) .......................... 6
• 117481
• Fitting, Barb (1/16" x 1/16") ................. 3
• 014-0542-01 • Fitting, Barb (3/16" x 3/16") ................. 2
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 5/07
Page 6-74.2
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Vacuum Instruments Mounting
Components
1
7
2
4
3
6
5
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PM
pebble grey
AF212900
Item
Part No.
Description
Qty
(N.L.A.)
152363-01
Vacuum Instr. Holder Bar Assy.
[RH-shown (includes items 1 thru 7)]
(sterling) ............................................ 1
(pebble).............................................. 1
(N.L.A.)
152278-01
Vacuum Instr. Holder Bar Assy.
[LH-not shown (includes items 1 thru 7)]
(sterling) ............................................ 1
(pebble).............................................. 1
Item
1
2
3
4
5
6
7
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
(N.L.A.)
120884-50
121218
106753
122981
120911
(N.L.A.)
120886-50
Qty
Screw ..................................................2
Bar Mount (sterling) ...........................1
Bar Mount (pebble).............................1
Post .....................................................1
Set Screw ............................................1
Vacuum Instr. Hdpc. Holder.................1
Set Screw ............................................2
Mounting Bar (sterling).......................1
Mounting Bar (pebble) ........................1
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-75
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Unit Mounted Chair Control
- Knight and Ultra Chairs Only
22
21
9
8
7
17
1
2
10
20
13
9
11
11
5
5
3
4
NOTE: Items 23 through 30 are
used when Asepsis 21 is
mounted on Ultra Chairs Only.
5
6
8
16
7
5
WH ITE
15
23
RED
9
14
8
7
6
24
5
BROWN
4
3
2
25
12
1
ORANGE
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PM
pebble grey
BLUE
GREEN
26
BLACK
27
29
28
DA3465i
Item
Part No.
1
10
11
12
(N.L.A.)
153130-01
• (N.L.A.)
• 122593-50
• 120911
• (N.L.A.)
• 120886-50
040-0006-97
102308
(N.L.A.)
121989-01
(N.L.A.
121885-50
(N.L.A.)
015-1499-00
152828
040-0006-73
002-0999-00
13
14
15
16
• 117244
• 102029
• 117810
• 177019
2
3
4
5
6
7
8
9
Description
Qty
Instrument Holder Bar Assy
(includes items 2 through 4)
(sterling) .............................................1
(pebble)...............................................1
•Bar Mount (sterling).............................1
•Bar Mount (pebble) ..............................1
•Set Screw .............................................2
•Mounting Bar (sterling) ........................2
•Mounting Bar (pebble) .........................2
Screw .....................................................6
Cable Tie (Not Shown)...........................1
Housing (sterling) .................................1
Housing (pebble) ...................................1
Bezel (sterling)......................................1
Bezel (pebble) .......................................1
Membrane Switch (sterling) ..................1
Membrane Switch (pebble) ...................1
Cable Assembly .....................................1
Screw (.138-32 x 3/4") ...........................2
Kit, Harness (Chair to Console) includes:
items 14, 15, & 16, & qty. 7 of item 13 ...1
Scotch-Loc Connector .........................21
9-Pin Connector .....................................1
Terminal .................................................7
Cable (11 ft.) (Chair to Console) ............1
Item
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Part No.
Description
Qty
109191
Clip ....................................................... 7
Adapter Harness Assy (not shown)
152829
For all Console, LR, wall/cabinet
mounted units, & carts ...................... 1
153021
For SLC (Special Less Console)
units only ........................................... 1
Bottom Connector Cable (not shown)
153038
For SLC (Special Less Console)
units only ........................................... 1
(N.L.A.)
Handle, RH (sterling)............................ 1
057-0650-50
Handle, RH (pebble) ............................. 1
(N.L.A.)
Handle, LH (sterling) ............................ 1
057-0651-50
Handle, LH (pebble).............................. 1
040-0010-159
Screw..................................................... 4
Refer to “Whip-style Delivery Unit” ....Ref.
029-4998-00
Touch Pad Assembly ............................. 1
040-0006-97
Screw..................................................... 2
053-1208-00
Chair Control Housing ........................... 1
051-1231-00-216 Bar Mount Holder .................................. 1
120886
Holding Bar............................................ 2
120911
Set Screw (apply 275181 locktite) ......... 2
040-0006-73
Screw..................................................... 2
015-1324-01
IDC Connector (not shown)...................... 1
015-1463-00
Harness (not shown) Used if Asepsis 21
is mounted on a Standalone Ultra Chair... 1
(N.L.A. denotes “No Longer Available”)
j & Serial Number
Always Specify Model
© Midmark Corporation 2000 SF-1605 Rev. 7/9/12
Page 6-76
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Whip Unit Mounted Chair Control
- Midmark Chairs Only
1
9
10
2
8
3
4
7
6
5
Item
Part No.
Description
029-2684-00
1
2
3
4
Qty
Right Hand Whip Chair
Control Assembly (Shown)
(includes items 1 thru 9) ..................... 1
029-2685-00
Left Hand Whip Chair
Control Assembly (not shown)
(includes items 1 thru 9) ..................... 1
• 040-0010-159 Screw .................................................... 4
• 029-4998-00 RH Touch Pad Assembly (Shown)
• 029-4998-01 LH Touch Pad Assembly (not shown..... 1
• 040-0006-97 Screw .................................................... 2
• 053-1208-00 Chair Control Housing ........................... 1
Item
5
6
Part No.
Description
• 040-0006-73
• 057-0650-50
Screw ..................................................... 1
Right Hand Chair Control
Handle (Shown) .................................... 1
Left Hand Chair Control
Handle (not shown) ................................ 1
Right Hand Whip Handle (Shown) ........ 1
Left Hand Whip Handle (not shown) ...... 1
Cable Tie................................................ 1
Cable Clamp .......................................... 1
Bottom Cover (Refer to “Whip
Cover Components”) ......................... Ref
• 057-0651-50
7
8
9
10
•
•
•
•
122150-50
122151-50
102308
109191
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 1/30/19
Page 6-77
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Curing Light Assembly
1
3
RED
BLACK
5
12
13
4
10
10
9
11
BLACK
8
BLACK
RED
BLUE
RED
2
6
RED
AIR
7
REGULATOR
80 psi
KA930000
Units with “UA”, “UC”, “UK”, & “UW” serial number prefixes built before 3-20-00
Item
1
2
3
4
5
6
7
8
9
10
Part No.
Description
153322
Curing Light Kit, 120 VAC
(Includes items 1 thru 11).................... 1
• Scotch-Loc Connector......................... 6
• Nut....................................................... 1
• Fitting .................................................. 1
• Check Valve ........................................ 1
• Plug ..................................................... 1
• Screw .................................................. 1
• Pressure Switch Plate ......................... 1
• Wire (black) ................................... 10 ft.
• Wire (red) ...................................... 10 ft.
• Unilite Kit, 120 VAC
(Includes all items shown in bubble) ... 1
•
•
•
•
•
•
•
•
•
•
117244
117358
117477
117698
118915
040-0010-36
122930
176396
275457
122929
Qty
Item
Part No.
11
••
12
13
••
••
Description
Qty
Individual components of Unilite Kit
(items 11thru 13) must be ordered from:
Spring Health Products
705 General Washington Ave, STE. 701
Norristown, PA 19403
Telphone: (800) 800-1680
• • Halogen Bulb (12V, 75W)
(Spring Health #BU-75).................... 1
• • Eye Shield ........................................ 1
• • Light Guide (11mm - standard) ........ 1
Also available from Spring Health:
Light Guides (8mm, 3mm, 13mm)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 3/02
Page 6-78
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Curing Light Assembly
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PM
pebble grey
KA933700
Units with UA, UC, UK, & UW serial number prefixes built after 3-20-00
and all units with PJ, PK, PM & V serial number prefixes
Item
Part No.
Description
153322
120 VAC Curing Light Assembly............ 1
9
Individual components of Unilite Kit
(items 1 thru 9) must be ordered from:
Spring Health Products
705 General Washington Ave, STE. 701
Norristown, PA 19403
Telphone: (800) 800-1680
10
1
12
13
14
15
16
17
18
19
20
21
22
23
24
1
2
•
3
4
5
•
•
•
6
7
8
•
•
•
Quantity
Unilite Complete (Includes Items 2
thru 9) (Spring Health# UL-1).............. 1
• Light Guide, 11mm (standard) ............ 1
Also Available from Spring Health:
Light Guides - sizes: 3mm, 8mm, &
13mm)
• Eye Shield (Spring Health# ES-01)..... 1
• Upper Housing .................................... 1
• Halogen Bulb, 12V, 75W
(Spring Health# BU-75)....................... 1
• Curing Light Housing........................... 1
• Power Supply (Spring Health# UL-3) .. 1
• Fuse, 250 V, 3A, 3AG.......................... 1
Item
Part No.
Description
•
• Solenoid / Relay Assembly (Spring
Health# UL-4) ..................................... 1
Clamp .................................................... 1
#ABLE 4IE v Connector Fitting ................................... 2
Barb Fitting ............................................ 6
Barb Fitting ............................................ 2
Gasket ................................................... 9
Connector, Scotch-Lok.......................... 8
Screw .................................................... 1
Lockwasher ........................................... 2
Screw .................................................... 2
Screw .................................................... 2
Washer .................................................. 2
Nut......................................................... 2
Nut......................................................... 2
Valve Mtg Bracket (sterling) ................. 1
Valve Mtg Bracket (pebble)................... 1
1/4” Clear Tubing (Refer to
“Internal Tubing”) ............................. Ref
Terminal................................................. 4
118167
014-0382-00
109714
117349
117660
117244
117341
P14718
040-0010-36
120385
P1673
117358
122357
(N.L.A.)
122393-50
25
26
121771
Quantity
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-78.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Cabinet Mounted Assistant’s
Instruments / Cabinet Mounted HVE
and Saliva Ejector
5
21
9
8
20
7
22
19
6
19
18
17
5
24
4
16
3
23
2
5
1
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PL
pebble grey
27
25
26
15
10
14
13
11
12
KA926800
Item
Part No.
(N.L.A.)
152268-01
(N.L.A.)
002-1879-00
1
2
3
4
5
6
7a
7b
8
9
10
11
12
13
(N.L.A.)
002-1831-00
S059-00126
121507
P15280
P1673
P17928-2
(N.L.A.)
002-1805-00
118613
002-10259-00
118614
(N.L.A.)
057-0831-50
118917
(N.L.A.)
152161-01
• 122979
• 122980
• 121148
Description
Quantity
Cabinet Mtd HVE and Saliva Ejector
(includes items 1 thru 26)
(sterling) .............................................1
(pebble)...............................................1
Cabinet Mtd Assistant’s Instruments
(includes items 1 thru 27) ....................1
(sterling) .............................................1
(pebble)...............................................1
Cabinet Mtd Assistant’s Instruments
w/Valve Block (incl. items 1 thru 28)
(sterling) .............................................1
(pebble)...............................................1
Umbilical Tubing, 5/8” I.D. (per ft) ...........7
Adaptor Bushing.....................................1
Cap Sleeve.............................................1
Washer ...................................................2
Screw .....................................................7
Housing Assembly(sterling) ..................1
Housing Kit (pebble) ..............................1
Basket ....................................................1
Basket bulk kit ......................................50
O-Ring....................................................1
Cover (sterling) .....................................1
Cover (pebble) ....................................1
Cap Plug (Earlier Units Only) .................1
Instr. Holder Assy (incl. items 12 thru 18)
(sterling) .............................................1
(pebble)...............................................1
• Single HVE Handpiece Holder ............1
• Twin HVE Handpiece Holder ...............1
• Screw ..................................................1
Item
Part No.
Description
14
• (N.L.A.)
• 121023-50
• 120913
• 121025
• (N.L.A.)
• 121024
• (N.L.A.)
• 121105-50
119033
155287
(N.L.A.)
121189-50
119034
(N.L.A.)
121190-50
121075-2
• Holder Mount (sterling) ...................... 1
• Holder Mount (pebble)........................ 1
• Set Screw............................................ 1
• Washer ................................................ 2
• Arm Holder Pin (sterling) ................... 1
• Arm Holder Pin (pebble)..................... 1
• Instrument Arm (sterling) ................... 1
• Instrument Arm (pebble) .................... 1
Thrust Bearing ....................................... 2
Washer .................................................. 1
Arm Mtg Plate (sterling) ....................... 1
Arm Mtg Plate (pebble) ...........................
Thrust Race ........................................... 3
Solids Collector Bracket (sterling) ....... 1
Solids Collector Bracket (pebble)......... 1
Stud ....................................................... 1
Saliva Ejector & Tubing Assembly
(sterling)............................................. 1
(pebble) .............................................. 1
HVE Valve & Tubing Assembly
(sterling)............................................. 1
(pebble) .............................................. 1
(For breakdown of items 25 & 26, refer to
“Saliva Ejector/HVE Valve Components”1
Syringe & Tubing (sterling) ................... 1
Syringe & Tubing (pebble)..................... 1
Cabinet Mtd Syringe Kit
(for units w/out a delivery unit)
(sterling)............................................. 1
(pebble) .............................................. 1
15
16
17
18
19
20
21
22
23
24
25
(N.L.A.)
152147-01
26
(N.L.A.)
152148-01
27
(N.L.A.)
152709-01
28
(N.L.A.)
153326-01
Quantity
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/6/18
Page 6-79
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
LR Mounted Telescopic Arm
1
5
4
3
6
3
2
27
7
8
1
29
26
25
19
9
28
30
20
31
21
10
18
32
17
11
12
24
17
16
22
15
34
13
14
23
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL
pebble grey
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
33
35
36
24
37
KA926900
Part No.
Description
122161
(N.L.A.)
122655-50
122662
(N.L.A.)
122486-50
(N.L.A.)
122198-50
(N.L.A.)
122656-50
120744-6
122708
122706
122709
120712
110207
117471
(N.L.A.)
120736-50
119891
121128
106753
101755
Set Screw .............................................. 5
Lower Support Ring (sterling) .............. 1
Lower Support Ring (pebble) ................ 1
Lower Support Bearing .......................... 2
Supporting Arm (sterling) ..................... 1
Supporting Arm (pebble)....................... 1
Cap (adhesive #064-0026-00)(sterling) 1
Cap (adhesive #064-0026-00)(pebble) . 1
Ring Cover (sterling) ............................ 1
Ring Cover (pebble) .............................. 1
Washer .................................................. 1
Arm Stop................................................ 1
Screw..................................................... 1
Set Screw .............................................. 1
Thrust Washer ....................................... 2
Bearing .................................................. 1
Screw..................................................... 1
End Cap (sterling) ................................ 1
End Cap (pebble).................................. 1
Foot........................................................ 1
Bumper .................................................. 1
Set Screw .............................................. 3
Screw (Apply 042-0024-00, Medium
Strength Adhesive).............................. 1
Pivot Link (sterling)............................... 1
Pivot Link (pebble) ................................ 1
Dowel Pin............................................... 1
(N.L.A.)
120733-50
120741-6
Quantity
Item
Part No.
Description
21
(N.L.A.)
120732-50
P17928-2
121337-2
119905
(N.L.A.)
120734-50
120729-6
Hinge Block (sterling)........................... 1
Hinge Block (pebble) ............................ 1
Screw .................................................... 2
Screw .................................................... 1
Screw .................................................... 4
Tube (sterling) ...................................... 1
Tube (pebble)........................................ 1
Rod Guide (apply 185171, Magnalube,
to delrin guide bushing) ......................... 2
Pin ......................................................... 2
O-Ring ................................................... 1
End Cap (sterling)................................ 1
End Cap (pebble) ................................. 1
Arm Holder Pin (sterling) ..................... 1
Arm Holder Pin (pebble)....................... 1
Washer .................................................. 2
Pivot Block (sterling) .......................... 1
Pivot Block (pebble) ............................ 1
Holder Mount (sterling) ........................ 1
Holder Mount (pebble).......................... 1
Set Screw .............................................. 1
Set Screw .............................................. 1
Rod, Assistant’s Instruments................. 1
Single HVE Handpiece Holder .............. 1
Twin HVE Handpiece Holder ................. 1
Installation Instructions (Not Shown)..... 1
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
36
37
120740-6
P12349
(N.L.A.)
120735-50
(N.L.A.)
121024-50
121025
(N.L.A.)
121113-50
(N.L.A.)
121023-50
120913
121148
120731-2
122979
122980
TPW1723
Quantity
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 7/11
Page 6-80
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Console Mounted Telescopic Arm
10
2
1
7
3
4
4
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL
pebble grey
5
6
5
Serial Number
Prefix
28
30
27
26
20
29
31
21
9
32
22
10
33
18
19
25
17
18
23
35
16
34
36
24
11
13
12
15
37
25
38
14
KA929601i
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Part No.
Description
Quantity
122836
120372
(N.L.A.)
122484-50
122506
122505
120744-6
(N.L.A.)
122198-50
(N.L.A.)
122486-50
040-0010-145
(N.L.A.)
122485-50
122357
120712
110207
117471
(N.L.A.)
120736-50
119891
121128
106753
101755
(N.L.A.)
120733-01
120741-6
Washer .................................................. 1
Screw..................................................... 4
Upper Retaining Ring (sterling) ............ 1
Upper Retaining Ring (pebble) ............. 1
Thrust Washer ....................................... 4
Thrust Bearing ....................................... 2
Washer .................................................. 1
Cap (adhesive #064-0026-00)(sterling) 1
Cap (adhesive #064-0026-00) (pebble) 1
Supporting Arm (sterling) ..................... 1
Supporting Arm (pebble)....................... 1
Screw..................................................... 4
Retaining Ring (sterling)....................... 1
Retaining Ring (pebble) ........................ 1
Nut (Used On Old Units ONLY) ........... 4
Thrust Washer ....................................... 2
Bearing .................................................. 1
Screw..................................................... 1
End Cap (sterling) ................................ 1
End Cap (pebble).................................. 1
Foot........................................................ 1
Bumper .................................................. 1
Set Screw .............................................. 3
Screw (use adhesive #042-0024-00) ..... 1
Pivot Link (sterling)............................... 1
Pivot Link (pebble) ................................ 1
Dowel Pin............................................... 1
Item
Part No.
Description
22
(N.L.A.)
120732-50
P17928-2
121337-2
119905
(N.L.A.)
120734-50
120729-6
Hinge Block (sterling)........................... 1
Hinge Block (pebble) ............................ 1
Screw .................................................... 2
Screw .................................................... 1
Screw .................................................... 4
Tube (sterling) ...................................... 1
Tube (pebble)........................................ 1
Rod Guide (Apply 185171, Magnalube,
To Delrin Guide Bushing) ...................... 2
Pin, Rod Guide ...................................... 2
O-Ring ................................................... 1
End Cap (sterling)................................ 1
End Cap (pebble) ................................. 1
Arm Holder Pin (sterling) ..................... 1
Arm Holder Pin (pebble)....................... 1
Washer .................................................. 2
Pivot Block (sterling)
1
Pivot Block (pebble)
1
Holder Mount (sterling) ........................ 1
Holder Mount (pebble).......................... 1
Set Screw .............................................. 1
Set Screw .............................................. 1
Rod, Assistant’s Instruments................. 1
Single HVE Handpiece Holder .............. 1
Twin HVE Handpiece Holder ................. 1
Installation Instructions (Not Shown)..... 1
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
120740-6
P12349
(N.L.A.)
120735-50
(N.L.A.)
121024-50
121025
(N.L.A.)
121113-50
(N.L.A.)
121023-50
120913
121148
120731-2
122979
122980
TPW1644
Quantity
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 7/11
Page 6-81
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Handpiece Illumination System Externally Mounted
1
3
2
3
KA930301
Item
Part No.
Description
152019
110 VAC Handpiece Illumination
System (Includes items 1 and 4)..... Ref
220 VAC Handpiece Illumination
System (Includes Items 2, 3, 4)....... Ref
110 VAC Transformer ............................ 1
152020
1
015-2653-00
Quantity
Item
2
3
Part No.
Description
Quantity
015-2653-00 & 02 220 VAC Transformer........................ 1
015-1480-00
Power Pack Assembly, Handpiece
Illumination.......................................... 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev.12/28/18
Page 6-82
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Handpiece Illumination System Internally Mounted
1
4
3
Terminal
4
10
Terminal
7
2
3
9
8
4
UNIT INSTRUCTIONS FIG. 1C
SHOWS THREE HDPC ILLUM
HDPC
HDPC
GREEN
TUBING
TUBING
7
GREEN
HDPC
TUBING
TO GAGE
BLACK
(3 PLS) REF
WHITE
BLACK
BLUE
WHITE
WHITE
6
WHITE/BLUE
CLEAR
ORANGE
BLACK
WHITE
GREEN
YELLOW
WHITE
5
CUT YELLOW WIRE
TO MAKE A JUMPER
TO THE 2nd HDPC.
KA930402i
Units with “UA”, “UC”, “UK”, & “UW” serial number prefixes built before 3-20-00
Item
Part No.
Description
153695
110 VAC Handpiece Illumination
System (Includes items 1 thru 11)... Ref
240 VAC Handpiece Illumination
System (Includes Items 2, 3, 4)....... Ref
110 VAC Transformer Assembly ............ 1
240 VAC Transformer Assembly ............ 1
Set Screw (Apply 042-0024-00,
Loctite*) ............................................... 2
Standoff ................................................. 2
Screw (Apply 042-0024-00,
Loctite*) ............................................... 2
152983
1
2
153022
153023
P11836
3
4
120859
103205
Quantity
Item
Part No.
Description
5
6
7
8
P9995
117477
117479
153025
9
• 104692
10
11
109191
TPW1629
Connector, Grey Wire Nut ..................... 5
Fitting, Tee............................................. 1
Uni-Clamp, 1/8” O.D. ............................. 9
Power Pack Assembly, Handpiece
Illumination.......................................... 1
• Plug, 2-Circuit (Uses two 117810,
Terminal) ............................................. 1
Cord Clip ............................................... 1
Installation Instructions, Handpiece
Illumination (Not Shown)..................... 1
Quantity
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 4/06
Page 6-83
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Handpiece Illumination System Internally Mounted
Terminal
4
8
Terminal
7
2
1
7
6
UNIT INSTRUCTIONS FIG. 1C
SHOWS THREE HDPC ILLUM
HDPC
HDPC
GREEN
TUBING
TUBING
TUBING
5
GREEN
HDPC
TO GAGE
BLACK
(3 PLS) REF
WHITE
BLACK
BLUE
WHITE
WHITE
4
WHITE/BLUE
CLEAR
ORANGE
BLACK
WHITE
GREEN
YELLOW
WHITE
3
CUT YELLOW WIRE
TO MAKE A JUMPER
TO THE 2nd HDPC.
KA930403i
Units with “PJ”, “PK”, “PL”, “PM” & “V” serial number prefixes built after 4-19-02
Item
1
2
3
4
5
Part No.
Description
Quantity
029-2909-00
029-2909-01
053-0789-01
P9995
117477
117479
115 VAC Transformer Assembly ............ 1
230 VAC Transformer Assembly ............ 1
Split Snap Bushing ................................ 1
Connector, Grey Wire Nut...................... 5
Fitting, Tee ............................................. 3
Uni-Clamp, 1/8” O.D............................... 9
Item
Part No.
Description
Quantity
6
153025
7
• 104692
8
9
109191
TPW1629
Power Pack Assembly, Handpiece
Illumination.......................................... 1
• Plug, 2-Circuit (Uses two 117810,
Terminal) ............................................. 1
Cord Clip ............................................... 1
Installation Instructions, Handpiece
Illumination (Not Shown) ....................... 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 2/04
Page 6-83.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Handpiece Illumination System
Duo Cart
1
k
lac
B
Red
VARIABLE
OUTPUT
POWER PACK
J-Box
Black
Red
From
Umbilical
5
DUO CART DIAGRAM
6
HDPC
GREEN
WHITE
GREEN
TUBING
WHITE
3
HDPC
TUBING
4
WHITE
CLEAR
WHITE
HDPC
TUBING
GREEN
GREEN
WHITE
CLEAR
TO GAGE
WHITE
GREEN
WHITE
GREEN
WHITE
BLUE
BLACK
BLACK
WHITE/BLUE
BLACK
CLEAR
WHITE
ORANGE
CLEAR
YELLOW
YELLOW
WHITE
GREEN
Note:
Cut Yellow Wire to
make a jumper to
the 2nd handpiece.
2
DA184000i
KA930403i
Units with “PJ”, “PK”, “PL”, “PM” & “V” serial number prefixes built after 1-19-07
Item
1
2
3
Part No.
Description
Quantity
029-2671-00
029-2680-00
P9995
117477
115 VAC Transformer Assembly............ 1
230 VAC Transformer Assembly............ 1
Connector, Grey Wire Nut ..................... 5
Fitting, Tee............................................. 3
Item
Part No.
Description
Quantity
4
5
117479
015-1480-00
6
015-0315-18
Uni-Clamp, 1/8” O.D...............................9
Power Pack Assembly, Handpiece
Illumination.............................................1
Terminal .................................................2
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev.
Page 6-83.2
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Handpiece Illumination System
Hygenist Cart, Doctor’s Cart, or
Rear Asepsis Delivery
1
Transformer
R
ed
Bla
ck
J-Box
or
Cabinet
Supply
Power
Tubing
k
ac
r P tics
e
p
w
Po er O
Fib
en
e
Gr
5
ite
Wh
HDPC
GREEN
WHITE
r
ea
Cl
GREEN
TUBING
WHITE
3
HDPC
TUBING
4
HDPC
TUBING
WHITE
GREEN
GREEN
WHITE
CLEAR
WHITE
CLEAR
TO GAGE
WHITE
GREEN
WHITE
GREEN
WHITE
BLUE
BLACK
BLACK
WHITE/BLUE
BLACK
CLEAR
WHITE
ORANGE
CLEAR
YELLOW
YELLOW
WHITE
GREEN
Note:
Cut Yellow Wire to
make a jumper to
the 2nd handpiece.
2
DA184400i
Units with “UA”, “UC”, “UK”, & “UW” serial number prefixes built after 1-19-07
Item
1
2
3
Part No.
Description
Quantity
029-2671-00
029-2680-00
P9995
117477
120 VAC Transformer Assembly............ 1
240 VAC Transformer Assembly............ 1
Connector, Grey Wire Nut ..................... 5
Fitting, Tee ............................................. 1
Item
4
5
Part No.
Description
Quantity
117479
015-1480-00
Uni-Clamp, 1/8” O.D. ..............................9
Power Pack Assembly, Handpiece
Illumination ..........................................1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev.
Page 6-83.3
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Water Driven Aspirator
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL, PM
pebble grey
31
9
10
32
7
6
36
32
16
33
17
1
34
35
5
4
37
28
8
Instrument
Holder
3
23
2
J Box
25
38
16
14
17
16
39
15
18
40
13
17
26
Asepsis
Head
11
29
24
27
22
19
41
20
21
12
KA932800
All units with “PJ”, “PK” serial number prefix & serial number V2200 thru V222409
Item
Part No.
1
2
3
4
5
6
7
8
9
(N.L.A.)
152473-01
• (N.L.A.)
• 121405-50
• (N.L.A.)
• 121094-50
• 120913
• 121148
• 122707
• (N.L.A.)
• 121096-50
• 121092
• (N.L.A.)
• 152157-01
10
(N.L.A.)
153087-01
11
12
13
14
15
16
117357
•
• C2563
152108
• 100740
• P17704
Description
Quantity
Instr. Holder Assy (incl. items 2 thru 9)
(sterling)............................................. 1
(pebble) .............................................. 1
• Saliva Ejector Holder (sterling) ......... 1
• Saliva Ejector Holder (pebble)........... 1
• Instr. Holder Mount (sterling) ............. 1
• Instr. Holder Mount (pebble)............... 1
• Set Screw ............................................ 1
• Set Screw ............................................ 1
• Instrument Holder Bearing .................. 2
• Tang Spacer (sterling)........................ 1
• Tang Spacer (pebble) ......................... 1
• Instrument Holder Tang....................... 1
• Locking Knob Assy (sterling) ............. 1
• Locking Knob Assy (pebble)............... 1
Saliva Ejector Valve w/Tubing
(sterling)............................................. 1
(pebble) .............................................. 1
(For breakdown of item 10, refer to:
“Saliva Ejector/HVE Valve Components”
Toggle Valve (includes items 12 & 13) ... 1
• Nut....................................................... 1
• Lockwasher ......................................... 1
Pilot Valve Assy (incl items15 thru 27)... 1
• Fitting .................................................. 1
• Sleeve ................................................. 3
Item
Part No.
Description
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
• P17705
•100742
•
• 275184
• 117662
• 137909
• 117660
• 109714
• 117351
• 117352
• 117349
151772-2
104499
137973
145104
• 110846
• 109756
• 107830
• 053-1618-00
122405
275184
(N.L.A.)
122404-50
117479
117477
117481
• Nut ...................................................... 3
• Tee ...................................................... 1
• Refer to “Water Valve Assy”)............... 1
• Foam Tape (per ft.) ........................ 0.25
• Plug..................................................... 1
• Elbow .................................................. 1
• Gasket ................................................ 4
• Fitting .................................................. 1
• Plug..................................................... 2
• Fitting .................................................. 1
• Fitting .................................................. 1
Drain Fitting ........................................... 1
Hose Clamp .......................................... 5
Elbow (includes items 16 & 17) ............. 1
Aspirator Assy (incl. items 34 thru 37) .. 1
• Aspirator Nut....................................... 1
• Washer ............................................... 1
• Aspirator Nozzle ................................. 1
• Aspirator ............................................. 1
Screw .................................................... 2
Foam Tape (Order By FT) .................. 0.2
Aspirator Bracket (sterling) .................. 1
Aspirator Bracket (pebble) .................... 1
Uni-Clamp, 1/8” O.D. ............................. 4
Fitting, Tee............................................. 1
Fitting, 1/8” to 1/8” O.D. ......................... 1
39
40
41
Quantity
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-84
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Water Driven Aspirator
7
5
16
9
10
42
6
32
33
1
34
35
17
4
16
37
28
8
Instrument
Holder
3
23
2
25
17
26
Asepsis
Head
38
16
14
17
16
39
15
18
40
13
29
24
27
J Box
11
36
31
22
19
41
20
21
12
KA932804
Applies to units with serial number V22410 thru Present
Item
Part No.
Description
Quantity
1
2
3
4
5
6
7
8
9
10
152473-01
• 121405-50
• 121094-50
• 121148
• 122707
• 121096-50
• 525-0063-00
• 121092
• 152157-01
153087-01
11
12
13
14
15
16
17
18
19
20
21
117357
•
• C2563
152108
• 100740
• P17704
• P17705
•100742
•
• 275184
• 117662
Instr. Holder Assy (incl. items 2 thru 9) 1
• Saliva Ejector Holder ......................... 1
• Instr. Holder Mount.............................. 1
• Set Screw ............................................ 1
• Instrument Holder Bearing .................. 2
• Tang Spacer ........................................ 1
• Washer, belleville ................................ 1
• Instrument Holder Tang....................... 1
• Locking Knob Assy.............................. 1
Saliva Ejector Valve w/Tubing ................ 1
(For breakdown of item 10, refer to:
“Saliva Ejector/HVE Valve Components”
Toggle Valve (includes items 12 & 13) ... 1
• Nut....................................................... 1
• Lockwasher ......................................... 1
Pilot Valve Assy (incl items15 thru 27)... 1
• Fitting .................................................. 1
• Sleeve ................................................. 3
• Nut....................................................... 3
• Tee ...................................................... 1
• Refer to “Water Valve Assy”) ............... 1
• Foam Tape (per ft.)......................... 0.25
• Plug ..................................................... 1
Item
Part No.
Description
Quantity
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
• 137909
• 117660
• 109714
• 117351
• 117352
• 117349
151772-2
104499
137973
145104
• 110846
• 109756
• 107830
• 053-1618-00
122405
275184
122404-50
117479
117477
117481
014-0605-00
137973
• Elbow .................................................. 1
• Gasket ................................................ 4
• Fitting .................................................. 1
• Plug..................................................... 2
• Fitting .................................................. 1
• Fitting .................................................. 1
Drain Fitting ........................................... 1
Hose Clamp .......................................... 5
Elbow (includes items 16 & 17) ............. 1
Aspirator Assy (incl. items 34 thru 37) .. 1
• Aspirator Nut....................................... 1
• Washer ............................................... 1
• Aspirator Nozzle ................................. 1
• Aspirator Body .................................... 1
Screw .................................................... 2
Foam Tape (Order By FT) .................. 0.2
Aspirator Bracket ................................... 1
Uni-Clamp, 1/8” O.D. ............................. 4
Fitting, Tee............................................. 1
Fitting, 1/8” to 1/8” O.D. ......................... 1
Straight Connector (certain units) ......... 1
Elbow Connector (certain units) ............ 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 8/07
Page 6-84.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Distilled Water System Kit Universal Mount
1
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL, PM
pebble grey
22
2
24
25
7
21
8
23
19
20
27
3
5
4
17
6
5
26
18
28
9
10
29
30
11
31
12
14
15
16
32
13
KA932701
All Units built before 1-2-08
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Part No.
Description
(N.L.A.)
002-1861-00
(N.L.A.)
121371-50
117489
•
•
117660
109714
119905
118242
(N.L.A.)
121372-50
105480
121337-2
120169
•
•
(N.L.A.)
121373-50
(N.L.A.)
122530-50
040-0250-11
Distilled Water System (sterling) .......... 1
Distilled Water System (pebble)............ 1
Cover (sterling) ..................................... 1
Cover (pebble) ...................................... 1
Indicator (includes items 3 & 4) ............. 1
• Lockwasher ......................................... 1
• Nut....................................................... 1
Gasket ................................................. 12
Fitting, Barb ........................................... 5
Screw..................................................... 4
Screw..................................................... 2
Regulator Mtg Bracket (sterling)........... 1
Regulator Mtg Bracket (pebble) ............ 1
Screw (if clamps are used) .................... 4
Screw (if mtd.directly to wall) ................ 4
Toggle Valve (incl. items 12 & 13).......... 1
• Lockwasher ......................................... 1
• Nut....................................................... 1
Bottle Bracket (sterling) ........................ 1
Bottle Bracket (pebble).......................... 1
Clamp, L.H.(sterling) ............................ 1
Clamp, L.H.(pebble).............................. 1
Screw..................................................... 1
Quantity
Item
Part No.
Description
17
(N.L.A.)
122529-50
117351
109714
117352
145756
016-0885-00
002-1813-00
Clamp, R.H. (sterling) .......................... 1
Clamp, R.H. (pebble) ............................ 1
Plug ....................................................... 5
Fitting .................................................... 5
Fitting .................................................... 2
Air Regulator ......................................... 1
Hose Clamp .......................................... 2
Bottle Cap Assy
(incl. tubing & items 25 & 27).............. 1
• Barb Fitting ......................................... 2
• Bottle Cap ........................................... 1
• O-ring.................................................. 1
• Barb Fitting ......................................... 1
Bottle Replacement Kit (1 liter) ............. 1
Bottle Replacement Kit (2.0 liter)
(includes item 23 thru 28) ................... 1
Uni-Clamp, 1/8” O.D. ........................... 11
Fitting, Tee............................................. 4
Fitting, Barb ........................................... 4
Plug, 1/8” O.D. ...................................... 1
Installation Instructions (not shown) ...... 1
User Manual (not shown) ...................... 1
18
19
20
21
22
23
24
25
26
27
28
• 117481
• 053-1463-00
• 014-0176-52
• 117482
002-0777-00
153282
29
30
31
32
33
34
117479
117477
117481
118915
TPW1521
TPW1760
Quantity
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 8/14
Page 6-85
Printed in U.S.A.
SECTION VI
PARTS LIST
Distilled Water System Kit Universal Mount
23
1
2
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL, PM
pebble grey
24
26
22
27
7
21
8
20
25
19
29
3
5
4
17
6
5
28
18
30
9
10
31
32
11
33
12
14
15
16
34
13
KA932702
All Units built after 1-2-08
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Part No.
Description
(N.L.A.)
152360-02
(N.L.A.)
121371-50
117489
•
•
117660
109714
119905
118242
(N.L.A.)
121372-50
105480
121337-2
120169
•
•
(N.L.A.)
121373-50
(N.L.A.)
122530-50
040-0250-11
Distilled Water System (sterling) .......... 1
Distilled Water System (pebble) ........... 1
Cover (sterling) .................................... 1
Cover (pebble) ...................................... 1
Indicator (includes items 3 & 4) ............. 1
• Lockwasher......................................... 1
• Nut ...................................................... 1
Gasket ................................................. 12
Fitting, Barb ........................................... 5
Screw .................................................... 4
Screw .................................................... 2
Regulator Mtg Bracket (sterling) .......... 1
Regulator Mtg Bracket (pebble)............ 1
Screw (if clamps are used).................... 4
Screw (if mtd.directly to wall) ................ 4
Toggle Valve (incl. items 12 & 13) ......... 1
• Lockwasher......................................... 1
• Nut ...................................................... 1
Bottle Bracket (sterling)........................ 1
Bottle Bracket (pebble) ......................... 1
Clamp, L.H.(sterling) ............................ 1
Clamp, L.H.(pebble).............................. 1
Screw .................................................... 1
Quantity
Item
Part No.
17
(N.L.A.)
122529-50
117351
109714
117352
145756
016-0885-00
051-1180-00-216
040-0010-156
002-1813-00
18
19
20
21
22
23
24
25
26
27
28
29
30
• 117481
• 053-1463-00
• 014-0176-52
• 117482
002-0777-00
153282
31
32
33
34
35
36
117479
117477
117481
118915
TPW1521
TPW1760
Description
Quantity
Clamp, R.H. (sterling) .........................1
Clamp, R.H. (pebble) ..........................1
Plug......................................................5
Fitting ...................................................5
Fitting ...................................................2
Air Regulator ........................................1
Hose Clamp (for sterling) ...................2
Clamp, Water Bottle (pebble) ..............2
Screw, (#10-24 x 2").............................4
Bottle Cap Assy
(incl. tubing & items 26 thru 28) ........1
• Barb Fitting .......................................2
• Bottle Cap .........................................1
• O-ring ................................................1
• Barb Fitting .......................................1
Bottle Replacement Kit (1 liter) ............1
Bottle Replacement Kit (2.0 liter)
(includes item 25 thru 28) .................1
Uni-Clamp, 1/8” O.D. .......................... 11
Fitting, Tee ...........................................4
Fitting, Barb..........................................4
Plug, 1/8” O.D. .....................................1
Installation Instructions (not shown).....1
User Manual (not shown).....................1
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 4/14
Page 6-85.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Handpiece Scaler System
12
4
33
1
13
5
8
10
9
11
34
14
35
36
6
32
17
7
18
15
31
30
2
3
Asepsis
Head
5
16
20
24
APC
Unit
5
22
19
21
23
26
20
37
8
5
8
28
29
27
25
KA933801i
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Part No.
Description
153189
•
•
103167
101949
153191
153192
Potentiometer (Includes Items 2 and 3) . 1
• Lockwasher ......................................... 1
• Nut....................................................... 1
2-Circuit Receptacle .............................. 1
Terminal Socket ................................... 14
Pressure Switch Assembly .................... 1
Scaler, Handpiece & Tube Assembly
(Includes Items 8 Thru 11) .................. 1
• Connector, Single Circuit................... 10
• Pin Terminal ........................................ 3
• Scaler System ..................................... 1
• Sleeve ................................................. 1
Receptacle............................................. 3
Terminal Socket ..................................... 3
Handpiece Insert ................................... 1
Terminal ............................................... 10
Connector, 6-Circuit ............................... 1
Knob, Water Control Valve..................... 1
Set Screw .............................................. 1
Cable, Scaler Umbilical.......................... 1
• 103155
• 101928
• 121330
• 121284
103152
117809
120661
117810
115426
120875-50
120178
153190
Quantity
Item
Part No.
Description
Quantity
20
21
22
115365
015-0364-00
015-1259-02
23
24
25
•
•
153188
26
27
28
29
30
31
32
33
34
35
36
• 121282
• 104692
• 275184
P5788
153081
015-0315-05
122357
117244
117479
117477
117481
Connector, 6-Circuit .............................. 2
Fuse (3AG, Slo-Blo, 1.5amp, 250V) ...... 1
Fuse Holder, 3AG (Includes Items
23 and 24)........................................... 1
• Fuse Holder Cap................................. 1
• Nut ...................................................... 1
Scaler/Solenoid Assembly
(Includes Items 20, 26 thru 28) ........... 1
• Solenoid / Control Assembly............... 1
• Plug, 2-Circuit ..................................... 1
• Foam Tape (Order By FT).............. 0.17
Screw .................................................... 4
120V Transformer Assembly ................. 1
Spade Terminal ..................................... 1
Nut......................................................... 4
Connector, Scoth-Lok............................ 1
Uni-Clamp, 1/8” O.D. ........................... 10
Barb Fitting, Tee ......................................
Barb Fitting ............................................ 2
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 1/10
Page 6-86
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Saliva Ejector/HVE Valve
Components
1
Saliva
Ejector
Valve
2
8
3
4
7
6
5
HVE
Valve
8
9
10
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PL, PM, V
pebble grey
KA939805
Used on Units Built Before 12 / 16 / 2006
Item
1
2
3
4
5
Part No.
Description
Quantity
• (N.L.A.)
• 121045
• (N.L.A.)
• (N.L.A.)
275253
S059-00127
Replacement Tip....................................1
Lever - Saliva Ejector .............................1
O-ring .....................................................1
Adapter ..................................................1
Tubing (per ft.) (sterling) ....................AR
Tubing (per ft.) (pebble) ......................AR
Item
6
7
8
9
10
Part No.
Description
Quantity
(N.L.A.)
• 121046
• 101043
• (N.L.A.)
275254
S059-00128
HVE Handpiece Valve .......................... 1
• Lever - HVE Valve ............................... 1
• O-ring .................................................. 2
• Adapter ............................................... 1
Tubing (per ft.) (sterling) .................... AR
Tubing (per ft.) (pebble) ..................... AR
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev.12/11
Page 6-87
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Saliva Ejector/HVE Valve
Components (Metal)
3
4
14
5
Saliva
Ejector
Valve
15
2
6
1
16
11
HVE
Valve
10
13
7
12
8
17
9
DA181903-01i
Used on Units Built After 12 / 15 / 2006
Item
Part No.
Description
Quantity
1
002-1638-00
2
029-3975-00
3
4
5
6
7
8
9
• 016-1116-00
• 016-1117-00
• 016-1114-00
• 016-1113-00
• 016-1115-00
• 053-1679-00
S059-00127
Saliva Ejector Valve
(Includes Items 2 thru 9) ........................ 1
Saliva Ejector Valve
(Includes Items 3 thru 8) ........................ 1
Replacement Tip....................................1
Screen, Filter ......................................... 1
O-ring..................................................... 2
Actuator .................................................1
O-ring..................................................... 1
Swivel, Small Base ................................ 1
Tubing, Saliva Ejector Valve................ AR
Item
Part No.
Description
Quantity
10
002-1634-00
11
029-3974-00
12
13
14
15
16
17
• 053-1680-00
• 016-1112-00
• 016-1111-00
• 016-1110-00
• 016-1109-00
S059-00128
HVE Handpiece Valve
(Includes Items 11 thru 17).................... 1
HVE Handpiece Valve
(Includes Items 12 thru 16).................... 1
• Swivel, Large Base ............................. 1
• O-ring.................................................. 1
• O-ring.................................................. 1
• O-ring.................................................. 2
• Actuator .............................................. 1
Tubing, HVE ....................................... AR
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. (12/12)
Page 6-87.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Unit Mounted X-Ray Viewer
1
2
3
5
12
6
7
9
17
8
15
16
4
12
AS2SEPI
13
18
10
14
11
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL, PM
pebble grey
DA117400i
Applies to units with serial numbers PJ1000 thru PJ1869 and PK1000 thru PK1041
Item
Part No.
Description
Qty
Item
Part No.
Description
Qty
Refer to Install Sheet TPW1800 for parts breakdown
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 7/02
Page 6-88
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Unit Mounted X-Ray Viewer
1
2
3
5
12
6
9
7
17
8
15
16
4
12
AS2SEPI
13
10
14
11
KA993301i
Applies to units with serial numbers PJ1870 and PK1042 thru Present
Applies to units with serial numbers V2200 thru Present
Item
Part No.
Description
Qty
Item
Part No.
Description
Qty
Refer to Install Sheet TPW1800 for parts breakdown
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev 2/04
Page 6-88.1
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Post Mounted X-Ray Viewer
12
10
13
11
10
7
8
9
14
8
6
10
11
5
3
12
4
17
16
18
2
15
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL, PM
pebble grey
18
1
17
KA993200
Item
1
2
3
4
5
6
7
8
Part No.
Description
(N.L.A.)
152702-01
•
(N.L.A.)
152350-01
• • (N.L.A.)
• • 121301-50
• • 119905
• 117604
• 119905
• (N.L.A.)
• 122052-50
• (N.L.A.)
• 121892-50
• 120744-6
Post Mounted X-Ray Viewer - 220 V.
(includes items 1 thru 15)
(sterling)............................................. 1
(pebble) .............................................. 1
• X-Ray Viewer Assy (incl. items 2 & 3)
(sterling)............................................. 1
(pebble) .............................................. 1
• • Mounting Post (sterling) .................. 2
• • Mounting Post (pebble) .................... 2
• • Screw................................................ 4
• Grommet ............................................. 2
• Screw .................................................. 6
• Link Cover (sterling)........................... 1
• Link Cover (pebble) ............................ 1
• Mounting Bar (sterling) ...................... 1
• Mounting Bar (pebble)........................ 1
• Washer ................................................ 2
Qty
Item
9
10
11
12
13
14
15
16
17
18
19
20
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
(N.L.A.)
122054-50
120712
110207
117471
120935
(N.L.A.)
121734-50
(N.L.A.)
152633-01
• (N.L.A.)
• 122216-50
• (N.L.A.)
• 120227-50
• 121751
• 121806
• TP1387
•
•
•
•
•
•
•
Qty
Arm Link (sterling) ............................. 1
Arm Link (pebble) .............................. 1
Thrust Washer .................................... 4
Thrust Bearing .................................... 2
Shoulder Screw .................................. 2
Screw.................................................. 2
Pivot Hub (sterling)............................ 1
Pivot Hub (pebble) ............................. 1
Clamp Kit (incl. items 16 thru 18)
(sterling) ............................................ 1
(pebble).............................................. 1
• Post Clamp (sterling) ...................... 2
• Post Clamp (pebble)........................ 2
• Plug Button (sterling) ...................... 2
• Plug Button (pebble)........................ 2
• Screw ............................................... 2
• Wrench (not shown) ......................... 1
• Installation Instructions (not shown). 1
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-89
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Accessory Shelf
2
1
3
13
12
4
5
6
11
7
8
9
10
DA112500i
Item
1
2
3
4
5
6
Part No.
Description
Qty
(N.L.A.)
151848-01
• 118429
• (N.L.A.)
• 120510-50
• 133325
• (N.L.A.)
• 120511-50
• P12575
• P507
Accessory Shelf (sterling)
Accessory Shelf (pebble)
• Mounting Pad ...................................... 4
• Shelf (sterling).................................... 1
• Shelf (pebble) ..................................... 1
• Warning Label ..................................... 1
• Shelf Bar (sterling) ............................. 1
• Shelf Bar (pebble) .............................. 1
• Washer ................................................ 2
• Nut....................................................... 2
Item
7
8
9
10
11
12
13
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
107591
(N.L.A.)
118456-50
040-0250-33
(N.L.A.)
118420-50
118451
(N.L.A.)
118456-50
120746-6
Qty
5/32 Allen Wrench .............................. 1
Shelf Bar (sterling)............................. 1
Shelf Bar (pebble) .............................. 1
Screw.................................................. 2
Shelf Bar (sterling)............................. 1
Shelf Bar (pebble) .............................. 1
Screw.................................................. 4
Fill Strip (Clamp Adaptor) (sterling) ... 4
Fill Strip (Clamp Adaptor) (pebble) .... 4
Filler Rod ............................................ 4
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-90
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Accessory Shelf
1
2
3
5
4
6
8
9
10
7
9
8
DA112600i
Item
1
2
3
4
Part No.
Description
Qty
(N.L.A.)
152526-01
• (N.L.A.)
• 120510-50
• 106657
• (N.L.A.)
• 121732-50
• (N.L.A.)
• 121731-50
Accessory Shelf (sterling)
Accessory Shelf (pebble)
• Shelf (sterling).................................... 1
• Shelf (pebble) ..................................... 1
• Screw .................................................. 2
• Shelf Bar (sterling) ............................. 1
• Shelf Bar (pebble) .............................. 1
• Hub (sterling) ..................................... 1
• Hub (pebble)....................................... 1
Item
5
6
7
8
9
10
Part No.
Description
• P12575
• P507
(N.L.A.)
152633-1
• (N.L.A.)
• 118420-50
• 121751
• (N.L.A.)
• 122216-50
•
•
•
•
•
•
•
•
•
Qty
Lock Washer ....................................... 2
Nut ...................................................... 2
Clamp Kit (sterling)............................ 1
Clamp Kit (pebble) ............................. 1
Plug Button (sterling)......................... 2
Plug Button (pebble) .......................... 2
Screw.................................................. 4
Post Clamp (sterling) ......................... 1
Post Clamp (pebble) .......................... 1
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-91
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Console Mounting Bracket Biltmore / Biltmore Classic
1
3
3
5
2
4
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL, PM
pebble grey
AF207901i
Item
1
Part No.
Description
Qty
(N.L.A.)
152509-01
Biltmore Series Mount Assembly
(includes items 1 thru 7)
(sterling)............................................. 1
(pebble) .............................................. 1
• (N.L.A.)
• 121762-50
• Collar (sterling) .................................. 1
• Collar (pebble).................................... 1
Item
2
3
4
5
6
7
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
(N.L.A.)
152493-50
121791
121124
040-0375-76
TPW1327
175593
Qty
Weldment (sterling) ........................... 1
Weldment (pebble)............................. 1
Hex Bolt (apply Loctite* 242) .............. 8
Hex Bolt .............................................. 4
Screw, Mtng. (3/8"-16 x 1") ................. 2
Installation Instructions (not shown) ... 1
Tape-Strap Pack (not shown).......... A/R
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-92
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Console Mounting Bracket Legacy / Legacy II / ENT Mount
1
3
3
5
2
4
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL, PM
pebble grey
AF208201i
Item
1
Part No.
Description
Qty
(N.L.A.)
152512-01
• (N.L.A.)
• 121805-50
Legacy Series Mount Assembly
(includes items 1 thru 5)
(sterling)............................................. 1
(pebble) .............................................. 1
• Collar (sterling)................................... 1
• Collar (pebble) .................................... 1
Item
2
3
4
5
Part No.
Description
•
•
•
•
•
•
•
•
•
•
(N.L.A.)
152545-50
121791
121124
040-0375-76
Qty
Weldment(sterling) ............................ 1
Weldment(pebble).............................. 1
Hex Bolt (apply Loctite* 242) .............. 8
Hex Bolt .............................................. 4
Screw, Mtng. (3/8"-16 x 1") ................. 2
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-93
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Console Mounting Bracket Royal Mount
1
2
2
AF2107
Item
1
Part No.
Description
152630
Royal Mount Assembly
(Includes items 1 thru 3)...................... 1
• Weldment ............................................ 1
• 121902
Qty
Item
Part No.
Description
Qty
2
• 040-0312-71
3
• TPW1429
• Hex Bolt (Apply Loctite* 242,
042-0024-00) ...................................... 8
• Installation Instructions (not shown) ... 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 3/02
Page 6-94
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Console Mounting Bracket Belmont 7 thru 37
1
2
2
AF2106
Item
1
Part No.
Description
152623
Belmont 7-37 Mount Assembly
(Includes items 1 thru 3)...................... 1
• Weldment ............................................ 1
• 121869
Qty
Item
Part No.
Description
2
• 040-0312-71
3
• TPW1429
• Hex Bolt (Apply Loctite* 242,
042-0024-00) ...................................... 8
• Installation Instructions (not shown) ... 1
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 3/02
Page 6-95
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Console Mounting Bracket Dental-EZ PL200 / J13 Simplicity
1
2
AF2108
Item
1
Part No.
Description
Qty
152843
Dental-EZ Mount Assy w/Support Bars
(Includes item 2) ..................................1
Item
2
Part No.
Description
Qty
•
• Hex Bolt (Apply Loctite* 242,
042-0024-00)....................................... 8
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 3/02
Page 6-96
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Console Mounting Bracket Dental-EZ Advantage / JV / E2000
1
3
3
2
4
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL, PM
pebble grey
Item
1
Part No.
Description
(N.L.A.)
152840-01
• (N.L.A.)
• 121762-50
Dental-EZ Mount Assembly
(includes items 1 thru 6)
(sterling)1
(pebble) .............................................. 1
• Collar (sterling) .................................. 1
• Collar (pebble).................................... 1
Qty
Item
2
3
4
5
6
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
(N.L.A.)
122147-50
121791
155551
C151
112106
Qty
Weldment (sterling) ........................... 1
Weldment (pebble)............................. 1
Hex Bolt (apply Loctite* 242) ............. 8
Hex Bolt .............................................. 4
Lockwasher (not shown) ..................... 4
Bolt (not shown).................................. 4
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 3/02
Page 6-97
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Console Mounting Bracket Adec Decade / 1020
1
2
2
AF2087
Item
1
Part No.
Description
152627
Adec 1020 Mount Assembly
(Includes items 1 thru 3)...................... 1
• Weldment ............................................ 1
• 121910
Qty
Item
Part No.
Description
2
• 040-0312-71
3
• TPW1429
• Hex Bolt (Apply Loctite* 242,
042-0024-00) ...................................... 8
• Installation Instructions (not shown) ... 1
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 3/02
Page 6-98
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Console Mounting Bracket Ritter x-100
1
5
3
3
2
4
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL, PM
pebble grey
AF2099001i
Item
1
2
Part No.
Description
(N.L.A.)
152626-01
• (N.L.A.)
• 152625-50
• 121791
Ritter x-100 Chair Mount Assembly
(includes items 1 thru 7)
(sterling)............................................. 1
(pebble) .............................................. 1
• Weldment (sterling)............................ 1
• Weldment (pebble) ............................. 1
• Hex Bolt (apply Loctite* 242)............... 8
Qty
Item
3
4
5
6
7
Part No.
Description
•
•
•
•
•
•
•
•
•
•
•
•
(N.L.A.)
121762-50
121124
040-0375-76
C151
TP1378
Qty
Collar (sterling) .................................. 1
Collar (pebble) ................................... 1
Screw.................................................. 4
Screw, Mtng. (3/8"-16 x 1") ................. 4
Washer ............................................... 4
Instructions (not shown)...................... 1
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-99
Printed in U.S.A.
Return To Table Of Contents
Adapters
2
1
Serial Number
Prefix
Paint
Color
UA, UC, UK, UW
sterling grey
PJ, PK, PL, PM
pebble grey
SECTION VI
PARTS LIST
AF2086
Item
Part No.
Description
(N.L.A.)
152543-50
Adapter for 2.0 in. round post to
2.5 in. square mount
(sterling)............................................. 1
(pebble) .............................................. 1
1
Qty
Item
Part No.
Description
(N.L.A.)
152159-50
Adapter for 2.5 in. square post to
2.0 in. round mount
(sterling) ............................................ 1
(pebble).............................................. 1
2
Qty
(N.L.A. denotes “No longer Available”)
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 12/09
Page 6-100
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Work Surface, 152396-01
Cart (18" x 13")
2
1
3
4
5
2
DA178301i
DA178301i
Item
Part No.
Description
Qty
Item
Part No.
Description
Qty
Refer to Installation Sheet 003-1665-00 for parts information
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605
Page 6-101
Printed in U.S.A.
Post Mount for Cuspidor
153050-XX
Return To Table Of Contents
SECTION VI
PARTS LIST
1
2
3
8
9
5
4
10
6
11
7
12
13
14
DA2244i
DA2244i
Item
1
2
3
4
5
6
Part No.
Description
153050-00
Post Mount for Cuspidor Assembly
(includes items 1 thru 14)
• Bar, Support........................................ 1
• Washer................................................ 1
• Hub, Telescopic Pivot Arm .................. 1
• Washer................................................ 2
• Bearing, Needle Thrust....................... 1
• Screw, Shoulder.................................. 1
•
•
•
•
•
•
121745-50
120744-6
121734-50
120712
110207
117471
Qty
Item
Part No.
Description
7
8
9
10
11
12
13
14
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
152633-01
122353
119571
122558-50
121148
050-5135-50
P17928-2
104499
Qty
Clamp Kit, for 2" Dia. Post ...................1
Bearing, Cuspidor ...............................1
Screw (#10-32 x 1/2")..........................1
Plug, Hub.............................................1
Set Screw (#10-32 x 1/2") ...................1
Plate, Umbilical Retainer .....................1
Screw (#10-32 x 3/8" SS) ....................1
Clamp, Hose........................................1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 5/09
Page 6-102
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Labels & Decals
Asepsis 21 Delivery Head
2
AS
EP
SIS
21
1
3
4
6
5
7
8
9
12
10 11
KA940900
Item
Part No.
Description
1
2
3
4
5
6
121525
TPW1415
120927
121527
120928
120926
Asepsis Decal ........................................ 1
ETL Label .............................................. 1
Syringe Label......................................... 1
Knight Logo............................................ 1
C.A. Label .............................................. 1
C.W. / D.A. Label................................. AR
Qty
Item
7
8
9
10
11
12
Part No.
Description
TPW1351
TPW1538
061-0733-00
061-0749-00
120687
TPW1493
ON/OFF Label ....................................... 1
Arm Lock Label ..................................... 1
CE0088 Label ....................................... 2
CE Representative Label ...................... 1
Serial Number Label ............................. 1
System Flush Label............................... 1
Qty
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 5/09
Page 6-103
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Labels & Decals
International Delivery Head
2
3
1
7
4
5
6
KA940001
Item
1
2
3
4
Part No.
Description
Qty
121413
TPW1538
TPW1493
061-0733-00
International Delivery Unit Decal ........... 1
Arm Lock Label...................................... 1
System Flush Label ............................... 1
CE0088 Label ........................................ 2
Item
5
6
7
Part No.
Description
Qty
061-0749-00
120687
TP1126
CE Representative Label ...................... 1
Serial Number Label ............................. 1
Whip Labels .......................................... 1
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 5/09
Page 6-104
Printed in U.S.A.
Umbilical Assemblies
(includes carts)
Return To Table Of Contents
SECTION VI
PARTS LIST
NOTE:
Used with Asepsis 21 or Whip
Delivery Units which are mounted
on a Knight Dental Chair.
KA992000i
Description
Assembly Number
(Includes all tubing, wiring, connectors, and protective sleeve)
Doctor’s Cart Umbilical (11.5 ft.)
152188-01
Hygienist’s Cart Umbilical (11.5 ft.)
152188-02
Rear Delivery Unit Umbilical (5.5 ft.)
029-2741-00
Wall Mounted Delivery Unit Umbilical
152006-01
Duo Cart Umbilical
029-2905-00
Assistant’s Vacuum Instruments Umbilical
153238-01
LR Cuspidor Umbilical
153182-01
Console to Junction Box Umbilical
152970-01
LR Chair Umbilical
153142-01
External Umbilical w/Bracket
153154-01
Console/LR Mtd. Delivery Unit Umblilical w/corrugated cover (11 ft.)
029-5651-00
L / R Cuspidor / Assistant Inst. Tubing w/ Hand Control Harness (9.8 ft.)
029-3251-00
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605 Rev. 1/13
Page 6-105
Printed in U.S.A.
Umbilical Assemblies
Return To Table Of Contents
SECTION VI
PARTS LIST
NOTE:
Used with Asepsis 21 and Whip Delivery
Unit which are mounted on a Midmark
UltraTrim or UltraConfort Dental Chair.
KA992000i
Description
Assembly Number
(Includes all tubing, wiring, connectors, and protective sleeve)
Whip Console Unit Tube/Wire Umbilical (11.0 ft.)
029-2693-00
Asepsis Console Unit Tube/Wire Umbilical (10.0 ft.)
029-2693-01
Whip L/R Unit Tube/Wire Umbilical (16.3 ft.)
029-2694-00
Asepsis L/R Unit Tube/Wire Umbilical (15.3 ft.)
029-2694-01
L / R Cuspidor / Assistant Inst. Tubing w/ Hand Control Harness (9.8 ft.)
029-3251-00
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605
Page 6-106
Printed in U.S.A.
Return To Table Of Contents
SECTION VI
PARTS LIST
Always Specify Model & Serial Number
© Midmark Corporation 2000 SF-1605
Printed in U.S.A.
Return To Table Of Contents
COMMENTS
The Technical Publications Department of Midmark
Corporation takes pride in its publications. We are sure
that our manuals will fill all of your needs when you are
performing scheduled maintenance, servicing, or
repairs on a Midmark product.
However, if you find any errors or feel that there should
be a change, addition, or deletion to a manual, please
let us know!
Page(s) and Paragraph(s) Needing Changed:
Description of Error or Desired Change:
Please fax or mail a copy of this completed comment
sheet to:
Midmark Corporation
ATTN: Technical Publications Department
60 Vista Drive
Versailles, Ohio 45380
Fax: (937) 526-5542
© Midmark Corporation 2000 SF-1621
Page 7-1
Printed in U.S.A.
Return To Table Of Contents
FAX ORDERING FORM
(SERVICE PARTS ONLY)
NOTES:
•
•
ALL BLOCKED AREAS MUST BE COMPLETED.
USE FOR NON-WARRANTY FAX ORDERS ONLY. WARRANTY ORDERS MUST BE TELEPHONED IN (1-800-MIDMARK).
ATTENTION: SERVICE DEPARTMENT FAX#: 877-249-1793
ACCT #:
P.O. #:
DATE:
NAME:
SHIP TO:
ADDRESS:
CITY, ST.:
CONTACT:
PHONE:
NON-EMERGENCY ORDER - TO SHIP WITHIN 72 HOURS IF
PART(S) IN STOCK.
EMERGENCY ORDER - TO SHIP WITHIN 24 HOURS IF PART(S)
IN STOCK (IF ORDER IS RECEIVED BEFORE 1:00 P.M. E.S.T).
SEND NOTIFICATION IF PARTS ARE NOT AVAILABLE TO SHIP
WITHIN 24 HOURS VIA
E-MAIL OR FAX TO:
QTY.
PART #
DESCRIPTION
OTHER
METHOD OF SHIPMENT
UPS
FED EX
NEXT DAY A.M.
NEXT DAY A.M.
NEXT DAY P.M.
NEXT DAY P.M.
2ND DAY
2ND DAY
GROUND
ECONOMY
(SPECIFY COLOR OF ITEM IF APPLICABLE)
COLOR CODE
PRICE/PER
TOTAL COST: $
© Midmark Corporation 2000 Rev. 1/07
Page 7-2
Printed in U.S.A.
Return To Table Of Contents
Midmark Corporation
60 Vista Drive
P.O. Box 286
Versailles, Ohio 45380-0286
937-526-3662
Fax 937-526-5542
midmark.com
Subject to change without notice.
Refer to www.Documark.com for latest revision.
© Midmark Corporation - 2005
Printed in U.S.A.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement