- Vehicles & accessories
- Motor vehicle electronics
- Car navigation systems
- Fiat
- 124 Spider Abarth
- Owner's manual
advertisement
▼
Scroll to page 2
of 106
F 18C7-526-AB FIAT® 124 SPIDER Second Edition Radio Book DID_3049359_18b_Fiat_124_Spider_Connect_7_Radio_Book_EN_011818.indd 1 © 2018 FCA US LLC. All Rights Reserved. FIAT is a registered trademark of FCA Group Marketing S.p.A., used under license by FCA US LLC. I A T 7 1 . 0 2 4 C O S N P N I E C D E R T 1/18/18 12:41 PM INTRODUCTION . . . . . . . . . . . . . 3 TIPS, CONTROLS, AND GENERAL INFORMATION . . . . . 3 Tips . . . . . . . . . . . . . . . . . . . . . . . Road Safety . . . . . . . . . . . . . . . . . Reception Condition . . . . . . . . . . . Care And Maintenance . . . . . . . . . Important Information . . . . . . . . . . Aerial . . . . . . . . . . . . . . . . . . . . . . Cybersecurity . . . . . . . . . . . . . . . . General Information . . . . . . . . . . . . 3 3 3 3 3 4 4 5 OPERATING TIPS FOR THE AUDIO SYSTEM . . . . . . . . . . . . . . 5 RADIO RECEPTION . . . . . . . . . . . 6 AM Characteristics . . . . . . . . . . . . 6 FM Characteristics . . . . . . . . . . . . 6 OPERATING TIPS FOR MP3 . . . 7 OPERATING TIPS FOR WMA .. 7 OPERATING TIPS FOR AAC . . . 8 OPERATING TIPS FOR OGG . . . 8 OPERATING TIPS FOR USB DEVICES — IF EQUIPPED . . . . . 8 OPERATING THE RADIO . . . . . 14 BLUETOOTH . . . . . . . . . . . . . . . 30 Radio On . . . . . . . . . . . . . . . . . . 14 Radio Favorites . . . . . . . . . . . . . . 16 Radio Broadcast Data System (RBDS) — If Equipped . . . . . . . . 16 Bluetooth Hands Free Outline . . . 30 Bluetooth Audio Outline . . . . . . . 30 Component Parts . . . . . . . . . . . . 30 Bluetooth Preparations . . . . . . . . 31 Available Language . . . . . . . . . . . 33 Voice Recognition . . . . . . . . . . . . 33 Audio Operation Using Voice Recognition . . . . . . . . . . . . . . . . 34 Making A Call . . . . . . . . . . . . . . . 35 Receiving An Incoming Call . . . . . 38 Call Interrupt . . . . . . . . . . . . . . . . 39 Receiving And Replying To Messages (Available Only With SMS Compatible Phones) . . . . . . . . . . . . . . . . . . . 39 Communication Settings . . . . . . . 41 Bluetooth Audio . . . . . . . . . . . . . 42 How To Use The Bluetooth Audio System . . . . . . . . . . . . . . . 44 Bluetooth Audio Device Information Display . . . . . . . . . . . . . . . . . . . . 46 How To Use Pandora . . . . . . . . . 47 How To Use Aha . . . . . . . . . . . . . 48 How To Use Stitcher Radio — If Equipped . . . . . . . . . . . . . . . . . 52 HD RADIO . . . . . . . . . . . . . . . . . . 17 OPERATING THE SATELLITE RADIO — IF EQUIPPED . . . . . . 19 SiriusXM Operation . . . . . . . . . . . 20 Parental Lock . . . . . . . . . . . . . . . 21 HOW TO USE AUXILIARY JACK/USB PORT — IF EQUIPPED . . . . . . . . . . . . . . . 22 Settings . . . . . . . . . . . . . . . . . . . 22 Applications . . . . . . . . . . . . . . . . 24 AUDIO CONTROL SWITCH OPERATION . . . . . . . . . . . . . . . . 24 Adjust The Volume . . . . . . . . . . . Seek Switch . . . . . . . . . . . . . . . . USB Audio/Bluetooth/Audio — If Equipped . . . . . . . . . . . . . . . . Aha/Stitcher Radio . . . . . . . . . . . Mute Switch . . . . . . . . . . . . . . . . 24 24 24 24 25 OPERATING TIPS FOR IPOD . . . 9 AUX/USB/IPOD MODE — IF EQUIPPED . . . . . . . . . . . . . . . 25 Audio System . . . . . . . . . . . . . . . . 9 Audio Set . . . . . . . . . . . . . . . . . . . 9 Basic Operation Method . . . . . . . 11 Home Screen . . . . . . . . . . . . . . . 12 Volume/Display/Sound Controls . . 12 How To Connect The USB Port/Auxiliary Jack . . . . . . . . . . . 26 How To Use AUX Mode . . . . . . . 27 How To Use USB Mode — If Equipped . . . . . . . . . . . . . . . . . 28 FIAT Connect 7.0 CONTENTS TROUBLESHOOTING . . . . . . . . 54 Bluetooth Hands-Free Customer Service . . . . . . . . . . . . . . . . . . . . Bluetooth Device Pairing (Connection Problems) . . . . . . . . Voice Recognition Related Problems . . . . . . . . . . . . . . . . . . Regarding Problems With Calls . . Other Problems . . . . . . . . . . . . . . 54 54 55 56 57 1 FIAT Connect 7.0 NAVIGATION . . . . . . . . . . . . . . . 58 2 Before Using The Navigation System . . . . . . . . . . . . . . . . . . . . Navigation Menu . . . . . . . . . . . . . Buttons And Other Controls On The Screen . . . . . . . . . . . . . . . . . Press And Hold . . . . . . . . . . . . . . Map Screen . . . . . . . . . . . . . . . . Position Markers . . . . . . . . . . . . . Objects On The Map . . . . . . . . . . Manipulating The Map . . . . . . . . . On-Road Navigation . . . . . . . . . . Selecting The Destination Of A Route . . . . . . . . . . . . . . . . . . . . . Entering An Address Or A Part Of An Address . . . . . . . . . . . . . . Selecting The Destination From The POI (Point Of Interest) . . . . . . Searching For A Place Using Local Search (Only Some Countries And Region) . . . . . . . . . . . . . . . . . . . . Reference Guide . . . . . . . . . . . . . 58 58 59 60 61 62 63 66 68 68 69 74 80 92 GLOSSARY . . . . . . . . . . . . . . . . . 98 END-USER TERMS . . . . . . . . . . 99 The vehicle is equipped with an audio system designed according to the specific characteristics of the passenger compartment, with a customized design that matches the style of the dashboard. The system is installed in an ergonomic position for the driver and passenger, and controls can be quickly located from the graphical display on the front, making the device easy to use. The instructions for use are given below and we recommend you read them carefully and always keep them on hand (for example, in the glove compartment). Enjoy reading. Happy motoring! Note: The information in this publication is provided by way of example. FCA can modify the content of this publication at any time, for technical or commercial purposes. For further information, contact an authorized dealer. TIPS, CONTROLS, AND GENERAL INFORMATION Care And Maintenance Caution! Tips Warning! Follow the safety rules below. Otherwise serious injuries may occur to the occupants or the system may be damaged. If the volume is too loud, this can be dangerous. Adjust the volume so that you can still hear background noises (e.g. horns, ambulances, police vehicles, etc). Road Safety Learn how to use the various system functions before setting off. Read the instructions for the system carefully before setting off. Reception Condition Reception conditions change constantly while driving. Reception may be disrupted by the presence of mountains, buildings or bridges, especially when you are far away from the broadcaster. Only clean the front panel and the display with a soft, clean, dry, anti-static cloth. Cleaning and polishing products may damage the surface. Do not use alcohol or similar products to clean the panel or the display. Do not use the display as a base for supports with suction pads or adhesives for external navigators or smartphones or similar devices. The display lens should not come into contact with pointed or rigid objects, which could damage its surface. Use a soft, dry anti-static cloth to clean and do not press. Never use alcohol, petrols and derivatives to clean the display lens. Prevent any liquid from entering the system: this could damage it beyond repair. Important Information FIAT Connect 7.0 INTRODUCTION In the event of a fault, the system must only be checked and repaired by an authorized dealer. If the temperature is particularly low, the display may take a while to reach optimum brightness. Note: The volume may be increased when receiving traffic alerts and news. 3 Aerial Satellite Radio Antenna — If Equipped AM/FM Radio Antenna The AM/FM radio antenna receives both AM and FM signals. To remove the antenna, turn it counterclockwise. The satellite radio antenna receives SiriusXM signals. FIAT Connect 7.0 To install the antenna, turn it clockwise. Make sure the antenna is securely installed. The risk of unauthorized and unlawful access to your vehicle systems may still exist, even if the most recent version of vehicle software (such as Connect software) is installed. 06020105123003 Warning! Cybersecurity 06020105121001 Note: To prevent damage to the antenna, remove it before passing beneath a low overhead clearance. When leaving your vehicle unattended, we recommend that you remove the antenna and store it inside the vehicle. 4 time and FCA US LLC, working with its suppliers, evaluates and takes appropriate steps as needed. Similar to a computer or other devices, your vehicle may require software updates to improve the usability and performance of your systems or to reduce the potential risk of unauthorized and unlawful access to your vehicle systems. Your vehicle may be a connected vehicle and may be equipped with both wired and wireless networks. These networks allow your vehicle to send and receive information. This information allows systems and features in your vehicle to function properly. It is not possible to know or to predict all of the possible outcomes if your vehicle’s systems are breached. It may be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death. Your vehicle may be equipped with certain security features to reduce the risk of unauthorized and unlawful access to vehicle systems and wireless communications. Vehicle software technology continues to evolve over ONLY insert media (e.g., USB or SD card) into your vehicle if it came from a trusted source. Media of unknown origin could possibly contain malicious software, and if installed in your vehicle, it may increase the possibility for vehicle systems to be breached. Note: FCA US LLC or your dealer may contact you directly regarding software updates. To help further improve vehicle security and minimize the potential risk of a security breach, vehicle owners should: – Routinely check www.driveuconnect.com/ support/software-update.html (U.S. Residents) or http://www.driveuconnect.ca (Canadian Residents) to learn about available Uconnect software updates. – Only connect and use trusted media devices (e.g. personal mobile phones or USBs). Privacy of any wireless and wired communications cannot be assured. Third parties may unlawfully intercept information and private communications without your consent. General Information The following regulatory statement applies to all Radio Frequency (RF) devices equipped in this vehicle: This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions A This device may not cause harmful interference, and B This device must accept any interference received, including interference that may cause undesired operation. Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. To comply with FCC RF exposure compliance requirements, the device much be installed to provide a separation distance of at least 20 cm (200 mm) from all persons. OPERATING TIPS FOR THE AUDIO SYSTEM Warning! ALWAYS drive safely with your hands on the wheel. You have full responsibility and assume all risks related to the use of the features and applications in this vehicle. Only use these features and applications when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. Note: For the purposes of safe driving, adjust the audio volume to a level that allows you to hear sounds outside of the vehicle including car horns and particularly emergency vehicle sirens. To prevent the battery from being discharged, do not leave the audio system on for a long period of time when the engine is not running. FIAT Connect 7.0 As always, if you experience unusual vehicle behavior, take your vehicle to your nearest authorized dealer immediately. If a cellular phone or CB radio is used in or near the vehicle, it could cause noise to occur from the audio system, however, this does not indicate that the system has been damaged. Do not spill any liquid on the audio system. 5 RADIO RECEPTION AM Characteristics AM signals bend around such things as buildings or mountains and bounce off the ionosphere. FIAT Connect 7.0 Therefore, they can reach longer distances than FM signals. Because of this, two stations may sometimes be picked up on the same frequency at the same time. FM Characteristics An FM broadcast range is usually about 25– 30 mi (40—50 km) from the source. Because of extra coding needed to break the sound into two channels, stereo FM has even less range than monaural (non-stereo) FM. Signals from an FM transmitter are similar to beams of light because they do not bend around corners, but they do reflect. Unlike AM signals, FM signals cannot travel beyond the horizon. Therefore, FM stations cannot be received at the great distances possible with AM reception. 6 Atmospheric conditions can also affect FM reception. High humidity will cause poor reception. However, cloudy days may provide better reception than clear days. Multipath Noise Since FM signals can be reflected by obstructions, it is possible to receive both direct signal and reflected signal at the same time. This causes a slight delay in reception and may be heard as a broken sound or a distortion. This problem may also be encountered when in close proximity to the transmitter. Flutter/Skip Noise Signals from an FM transmitter move in straight lines and become weak in valleys, between tall buildings, mountains, and other obstacles. When a vehicle passes through such an area, the reception conditions may change suddenly, resulting in annoying noise. Weak Signal Noise In suburban areas, broadcast signals become weak because of distance from the transmitter. Reception in such fringe areas is characterized by sound breakup. Strong Signal Noise This occurs very close to a transmitter tower. The broadcast signals are extremely strong, so the result is noise and sound breakup at the radio receiver. Station Drift Noise When a vehicle reaches the area of two strong stations broadcasting at similar frequencies, the original station may be temporarily lost and the second station picked up. At this time, there will be some noise from this disturbance. MP3 stands for MPEG Audio Layer 3, which is standardized voice compression established by the ISO (*) working group (MPEG). Use of MP3 allows for audio data to be compressed to approximately a tenth of the source data size. (terrestrial, satellite, lead and/or any other media), broadcasting/streaming via the Internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on demand applications. An independent license for such use is required. For details, please visit http://www. mp3licensing.com. This unit plays files with the extension (.mp3) as MP3 files. When naming an MP3 file, be sure to add an MP3 file extension (.mp3) after the file name. (*) International Organization for Standardization The number of characters which can be displayed is restricted. Note: Do not use an audio file extension on files other than audio files. In addition, do not change the audio file extension. Otherwise, the unit will not recognise the file correctly resulting in noise or a malfunction. Supply of this product only conveys a license for private, non-commercial use and does not convey a license or imply any right to use this product in any commercial (i.e. revenuegenerating) real time broadcasting OPERATING TIPS FOR WMA WMA is short for Windows Media Audio and is the audio compression format used by Microsoft. Audio data can be created and stored at a higher compression ratio than MP3. This unit plays files with the extension (.wma) as WMA files. * Microsoft and Windows Media are registered trademarks of Microsoft Corporation U.S. in the United States and other countries. Note: Do not use an audio file extension on files other than audio files. In addition, do not change the audio file extension. Otherwise, the unit will not recognize the file correctly resulting in noise or a malfunction. WMA files written under specifications other than the indicated specification may not play normally or files or folder names may not display correctly. FIAT Connect 7.0 OPERATING TIPS FOR MP3 The file extension may not be provided depending on the system, version, software, or settings. In this case, add the file extension “.wma” to the end of the file name, and then write it to the disc. 7 FIAT Connect 7.0 OPERATING TIPS FOR AAC OPERATING TIPS FOR OGG AAC stands for Advanced Audio Coding, which is standardized voice compression established by the ISO (*) working group (MPEG). OGG is the audio compression format for Xiph. Org Foundation. Audio data can be created and stored at a higher compression ratio than MP3. Extension This unit plays files with the extension (.ogg) as OGG files. Playback With This Unit .mp3 MP3 This unit plays files with the extensions .aac/.m4a/.wav (**) as the AAC files. Note: ,wma WMA .aac, .m4a, .wav AAC .ogg OGG (*) International Organization for Standardization Note: Do not use an audio file extension on files other than audio files. In addition, do not change the audio file extension. Otherwise, the unit will not recognise the file correctly resulting in noise or a malfunction. AAC files written under specifications other than the indicated specification may not play normally or files or folder names may not display correctly. The file extension may not be provided depending on the computer operating system, version, software, or settings. In this case, add the file extension “.aac ”, “.m4a”, or “.wav” to the end of the file name, and then write it to the memory. 8 Audio data can be created and stored at a higher compression ratio than MP3. Do not use an audio file extension on files other than audio files. In addition, do not change the audio file extension. Otherwise, the unit will not recognise the file correctly resulting in noise or a malfunction. OGG files written under specifications other than the indicated specification may not play normally or files or folder names may not display correctly. The file extension may not be provided depending on the computer operating system, version, software, or settings. In this case, add the file extension “.ogg” to the end of the file name, and then write it to the disc. OPERATING TIPS FOR USB DEVICES — IF EQUIPPED This unit plays audio files as follows: Note: Do not use an audio file extension on files other than audio files. In addition, do not change the audio file extension. Otherwise, the unit will not recognize the file correctly resulting in noise or a malfunction. This unit supports playback of music files recorded to an iPod. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. The iPod may not be compatible depending on the model or OS version. In this case, an error message is displayed. Note: Remove the iPod when it is not in use. Because the iPod is not designed to withstand excessive changes in temperature inside the cabin, it could be damaged or the battery may deteriorate due to the excessive temperature or humidity inside the cabin if it is left in the vehicle. If data in the iPod are lost while it is connected to the unit, FCA cannot guarantee recovery of any lost data. If the iPod battery is deteriorated, the iPod may not recharge and playback may not be possible when it is connected to the unit. For details on using the iPod, refer to the iPod instruction manual. When connecting the iPod to a USB port, all commands are made from the audio unit. iPod control is not possible. The nine speakers with differing frequency ranges that comprise this high performance system are paired with a high-efficiency seven-channel hybrid amplifier to deliver clear sound with a wide reproduction range. The audio unit cannot display images or videos stored in an iPod. Audio Set Audio System Six audio speakers. Available “Bose Premium Audio System” with Nine Bose audio speakers including dual headrest speakers for driver and passenger seats and woofer installed in passenger floor. Bose Audio System (Premium Sound System) — If Equipped In addition to the six speakers used by the standard-equipment system, the “Premium sound system” includes a subwoofer positioned behind the dashboard at the foot of the passenger side and a pair of headrest speakers on both the driver’s and passenger seats. Note: The explanation of functions described in this publication may differ from the actual operation, and the shapes of screens, buttons, letters, and characters displayed may also differ from the actual appearance. Additionally, depending on future software updates, the content may successively change without notice. Audio set has three interfaces: Multimedia Control Knob; Touchscreen; Voice recognition with steering switch and microphone. FIAT Connect 7.0 OPERATING TIPS FOR IPOD 9 FIAT Connect 7.0 Multimedia Control Knob Operation Switches Around Multimedia Control Knob Multimedia Control Knob Operation Note: For safety reasons, some operations are disabled while the vehicle is being driven. The following operations can be done by pressing the switches around the multimedia control knob: Selection Of Icons On Screen Volume Dial Operation : displays the home screen. Press the volume dial to switch the audio MUTE on and off. : displays the Entertainment screen. Turn the volume dial to adjust the volume. The volume increases by turning the dial clockwise, and decreases by turning it counterclockwise. : displays the Favorites screen. Long-press to store particular items in Favorites (radio, phonebook and destination of the navigation system can be programmed) : returns to previous screen. Press the multimedia control knob and select the icon. Note: Long-press operation of the multimedia control knob is also possible for some functions. Touchscreen Operation Note: Do not press the screen strongly or press it with a sharp pointed object. Otherwise, the screen could be damaged. For safety reasons, touchscreen operation is disabled while the vehicle is moving. 06020400122002 10 NAV: displays the Navigation screen (only navigation-equipped vehicles). If the SD card for the navigation system is not inserted, the compass indicating the direction in which the vehicle is moving is displayed. Tilt or turn the multimedia control knob and move the cursor to the desired icon. Basic Operation Method Touch & Tap Proceed as follows: Touch or tap on the item indicated on the screen. 06020400033001 06020409364002 Slide Swipe Touch the setting item displaying a slider bar. Proceed as follows: Touch the slider with your finger and move to the desired level. Touch the screen with your finger and move up or down. Items which were not displayed can be displayed. 06020409365002 Return To Previous Screen Touch the Back button. FIAT Connect 7.0 The operation is launched and the next item is displayed. Displaying The Home Screen Touch the Home button. 11 Home Screen Icon Functions FIAT Connect 7.0 Applications Information such as average fuel economy, maintenance, and warnings can be verified depending on the grade and specification, the screen display may differ. Entertainment Operates audio such as the radio and CDs. The audio source most recently used is displayed. An audio source which cannot be used at that time is skipped and the previous audio source is displayed. To change the audio source, select the icon displayed at the bottom of the screen. Communication Bluetooth related functions are available. Navigation Navigation screen is displayed (vehicles with navigation system). If the SD card for the navigation system is not inserted, the compass indicating the direction in which the vehicle is moving is displayed. The compass may not indicate the correct bearing when the vehicle is stopped or travelling at a slow speed. Settings Overall setting menu (such as display, sound, Bluetooth and Language). Depending on the grade and specification, the screen display may differ. Volume/Display/Sound Controls Select the Display tab to select the item you would like to change. Volume Adjustment Display OFF/Clock Turn the multimedia control knob VOL dial. The volume switch on the steering wheel can also be pressed. The center display can be turned off. Select Turn Display Off to turn the display off. Display Settings When Turn Display Off and Show Clock is selected, the center display turns off and the clock is displayed. Select the icon on the home screen to display the Settings screen. 12 The center display can be turned back on as follows: 1. Touch the center display; 2. Operate the multimedia control knob. Daytime/Nighttime (Mode) Screen Setting The daytime or nighttime screen can be selected. Day: daytime screen setting Night: nighttime screen setting (*) The display is constantly on daytime screen when the illumination dimmer is canceled. Adjust the center display brightness using the slider. Proceed as follows: 1. Select Reset. 2. Select Yes. Contrast Adjustment Audio Sound Adjustment Adjust the center display contrast using the slider. Select the icon on the home screen to display the Settings screen. Display Setting Reset Select the Sound tab to select the item you would like to change. Brightness Adjustment All of the screen setting values can be reset to their initial settings. Indication Setting Value Bass (Low Pitch Sound) + Side: Low Pitch Enhancement – Side: Low Pitch Reduction Treble (Treble Sound) + Side: Treble Enhancement – Side: Treble Reduction Fade (Front/Rear Volume Balance) Front: Front Speaker Volume Enhancement Rear: Rear Speaker Volume Enhancement Balance (Left/Right Volume Balance) Right: Right Speaker Volume Enhancement Left: Left Speaker Volume Enhancement ALC (*) (Automatic Volume Adjustment) Off—Adjustment At Seven Levels Bose AudioPilot (**) (Automatic Volume Adjustment) On/Off Beep (Audio Operation Sound) On/Off FIAT Connect 7.0 Auto: switches screen automatically according to headlight illumination condition (*) (*) Standard audio (**) Bose Sound System 13 Automatic Volume Adjustment FIAT Connect 7.0 The automatic level control (ALC) is a feature that automatically adjusts audio volume and sound quality according to the vehicle speed. The volume increases in accordance with the increase in vehicle speed, and decreases as vehicle speed decreases. Bose AudioPilot (Automatic Volume Adjustment) When driving, background noise can interfere with enjoying music. AudioPilot (*) noise compensation technology continuously adjusts the music to compensate for background noise and vehicle speed. It reacts only to sustained noise sources and not intermittent ones, such as speed bumps. An enhanced DSP algorithm allows faster and more effective compensation for unusual situations, such as driving on a very rough road or at high speeds. OPERATING THE RADIO Radio On Select the icon on the home screen to display the Entertainment screen. When selecting the desired radio, the following icons are indicated in the lower part of the center display. (*) AudioPilot is a registered trademark of Bose Corporation. AM/FM Radio Icon Function Displays the Entertainment menu. Use to switch to a different audio source. Displays the station list (AM only). Select Update Station List to display the frequencies of up to ten radio stations on the auto memory preset list. Select the desired frequency. Displays the Favorites list. Long-press to store radio station currently being aired Switches the HD Radio on and off. Displays the multi-cast channel list of the HD Radio 14 Icon Function You can search for receivable radio stations. Scanning stops at each station for about five seconds. Select again to continue receiving the radio station Launches the iTunes Tagging function (for Apple devices with USB use only). Can be used when the HD Radio is on. Automatic radio station selection. When long-pressed, the radio frequency changes continually. It stops when you remove your hand from the icon or the multimedia control knob. Displays the FM settings screen (FM only). On/Off of Alternative frequency and Region lock can be set. Displays sound settings to adjust audio quality level. Refer to “Volume/Display/ Sound controls” paragraph. Note: While in FM Mode, pressing the / icon, will select each program. FIAT Connect 7.0 You can change the radio frequency manually. Rotate the multimedia control knob, slide the screen, or touch the radio frequency. Press left arrow or right arrow buttons to change the radio frequency one step at a time. When left arrow or right arrow buttons is long-pressed, the radio frequency changes continually. It stops when you remove your hand from the icon or the multimedia control knob. 15 Radio Favorites Deleting From Favorites Selected stations can be registered for convenient operation. Up to 50 stations can be registered. The Favorites list is common to AM, and FM. Proceed as follows: 1. Select the icon to display the Favorites list. 2. Select Add/Edit Radio Favorites. 3. Select Delete. 4. Select the radio station or radio frequency you want to delete. 5. Select Delete. Registering To Favorites FIAT Connect 7.0 Long-press the icon to register the current radio station. The registration can also be performed using the following procedure: 1. Select the icon to display the Favorites list. 2. Select Add/Edit Radio Favorites. 3. Select Add <active station> 4. The station is added to the bottom of the Favorites list. Note: If the battery is disconnected, your Favorites list will be not deleted. Selecting Radio Station From Favorites Proceed as follows: 1. Select the icon to display the Favorites list. 2. Select the radio station name or radio frequency to tune in the radio station. 16 Changing Favorites List Order Proceed as follows: 1. Select the icon to display the Favorites list. 2. Select Add/Edit Radio Favorites. 3. Select Move. 4. Select a radio station or radio frequency. The selected radio station can be moved. 5. Slide the radio station or move it using the multimedia control knob, then select OK. Radio Broadcast Data System (RBDS) — If Equipped Radio Text Information Display Radio text information sent from a broadcasting station is displayed in the center display. Note: Radio text information is a function of FM radio. Text information is not displayed in the following: During reception Not an RBDS broadcast RBDS broadcast, but radio text is not transmitted from the radio station Genre Seek Some FM stations transmit Genre codes (Program type like a Rock, News, and so on). This code enables alternative stations transmitting the same Genre code to be found quickly. To Scan For Genre Seek Proceed as follows: 1. Select the icon while in the FM mode. 2. Select Genre Seek to open the genre list. Note: To change the desired genre, select the icon. Example: 89.3 is currently being received. With Rock selected as the Genre, the radio stations broadcasting Rock are at the following frequencies. 98.3 (*) , 98.7, 104.3 (*) , 107.1 (*) Radio stations with good reception The frequency changes as follows each time Genre Seek is pressed. 89.3→98.3→104.3→98.3 Note: Only one Genre can be selected. The Genre Seek function searches for genre code (program type) which FM analog broadcasts transmit. HD Radio specialty programs (HD2-HD8) cannot be searched because they are not FM analog broadcasts. HD RADIO If radio stations, which are selected by scanning, using the Genre Seek function are HD Radio broadcasting stations, they are changed from analog broadcasts to HD Radio broadcasts after a few seconds if the reception conditions are good. The genre is displayed after the switch, however, the genre for FM analog broadcasts may differ. Your radio product has a special receiver which allows it to receive digital broadcasts (where available) in addition to the analog broadcasts it already receives. Digital broadcasts have better sound quality than analog broadcasts as digital broadcasts provide free, crystal clear audio. What is HD Radio Technology And How Does It Work? HD Radio Technology is the digital evolution of analog AM/FM radio. For more information, and a guide to available radio stations and programming, please visit www.hdradio.com. It may not be possible to receive any station even if the Genre Seek function is used. Benefits of HD Radio Technology If a program in the selected genre is not broadcast to a region, reception is not possible even if the Genre Seek function is used. The song title, artist name, album name and genre will appear on the screen when available by the radio station. Information FIAT Connect 7.0 3. Select the genre type you want to select. 4. Select the icon. 17 Multicast On the FM radio frequency most digital stations have “multiple” or supplemental programs on each FM station. FIAT Connect 7.0 Listening To HD Radio Technology If HD Radio icon turns on by selecting a radio station which is an HD Radio broadcasting station, the analog broadcast is switched to an HD Radio broadcast automatically after a few seconds and then received. If the broadcast is stopped and changed to an analog broadcast, press down the HD Radio icon to turn off the HD Radio. Multicast channel selection (FM) If multi-cast channels are available for an HD Radio broadcast currently being received, the multi-cast channel list is displayed. Select the desired radio station. Note: If an analog broadcast is received once and is received while HD1 is selected, the audio unit switches to the station automatically. 18 When the HD Radio icon is illuminated, there could be a noticeable difference in sound quality and volume when a change from digital to analog signals occurs. If the sound quality and volume become noticeably diminished or cut off, select the HD Radio icon to turnoff HD Radio. The Icon will not illuminate. Once an analog broadcast is received when HD1 is selected from the Favorite channels, it is switched to HD Radio automatically. If the radio reception conditions are poor, or HD is off, switching to HD Radio broadcasts is not possible. When an HD specialty channel (HD2 to HD8) is selected from the Favorite channels, “Signal Lost” is displayed and no audio is output until HD Radio is received. If the radio reception conditions are poor, “Signal Lost” continues to be displayed. If the HD Radio icon is not illuminated, information such as song titles of the station are received, however, the audio output is analog. iTunes Tagging (For Apple Devices With USB Use Only) By tagging a song currently being aired, the song can be easily purchased from the iTunes Store. Up to 100 tags can be stored. Proceed as follows: 1. Select the icon. The tag is stored in the audio unit. 2. Connect the device via USB. The tag is sent to the connected device automatically. 3. Synchronize the device with iTunes. The tagged song can now be purchased from the iTunes Store. Note: Both AM and FM HD Radio can be used. Because iTunes Tagging only supports purchasing from the iTunes Store, direct downloading from the equipped vehicle audio is not possible. If the available memory for the connected device is insufficient, the tag is not sent. If an error occurs while the tag is being sent, reconnect the device. What Is Satellite Radio? With over 130 channels, Sirius XM Satellite Radio brings you more of what you love. Get channels and channels of commercial-free music, plus sports, news, talk, entertainment and more. Commercial-free music from nearly every genre — rock to pop, hip-hop to country, jazz, classical and more. Plus live performances and artist-dedicated channels. Live sports Play-by-Play & Expert Talk — every NFL game, every NASCAR race, 24/7 sports talk, college sports and more. Exclusive entertainment, comedy and talk — The biggest names, compelling talk, hilarious comedy. World-class news plus local traffic and weather. Sign up for Sirius XM Satellite Radio today! Note: To listen to Sirius XM, a prior subscription (fee-based) is required. The channels which you can receive depend on the package you subscribe to. Satellite radio is broadcast as Sirius, XM, and Sirius XM in the U.S.A., and Sirius and XM in Canada. In this owner’s manual, only the name Sirius XM is used. For traffic and weather channels, map information is not displayed and only audio broadcasts can be received. Call 888-539-7474 to activate. For more information, visit www.siriusxm.com (U.S. Residents) or www.siriusxm.ca (Canadian Residents). Satellite radio is only available in regions providing satellite radio service (some areas of the United States and Canada). Contact a Fiat Dealership. How To Activate Satellite Radio You must call Sirius XM to re-activate your service. Activation is free and takes only a few minutes. Sirius XM service uses an ID code to identify your radio. This code is needed to activate Sirius XM service, and report any problems. Please have the following information ready: Radio ID (8-digit electronic serial no See below for how to find your ESN) Valid credit card information (may not be required at initial sign-up) Be sure you are parked outside with a clear view of open sky, you will be instructed to turn on your radio. In Sirius XM mode and tuned to channel 184 (Sirius)/1 (XM and Sirius XM). Activation typically takes only 2—5 minutes. Displaying The Radio ID (ESN) FIAT Connect 7.0 OPERATING THE SATELLITE RADIO — IF EQUIPPED When channel 0 is selected, the radio ID is displayed. Use the PREVIOUS or NEXT channel buttons to select channel 0. 19 SiriusXM Operation Select the icon on the home screen to display the Entertainment screen. When XM is selected, the following icons are indicated in the bottom part of the center display. FIAT Connect 7.0 Icon Function Displays the Entertainment menu. Use to switch to a different audio source. Displays the channel list of the current category. Displays the favorites list. Long-press to store the channel currently being aired. Refer to “Operating The Radio” paragraph. Indicates that the parental lock function is in use. Switching of Lock/Unlock and PIN code setting changes can be performed. Plays each channel in the current channel list for 5 seconds. Select again to continue receiving the channel. Plays the previous channel. Plays the next channel. Displays sound settings to adjust audio quality level. Refer to “Volume/Display/Sound Controls” paragraph. 20 Parental Lock PIN Code Reset Receivable channels can be displayed on the channel list screen. You can easily select the channel you want to listen to from the list. Each category can be also displayed. If a channel is locked, the channel is muted. If the registered code has been forgotten, reset the code to the default [0000] code. Proceed as follows: Select the channel list. icon to display the Select a desired channel. Select From Category List Proceed as follows: Select the channel list. icon to display the Select Category: to display the category list. Select a desired category. To use the parental lock function, the PIN code must be initialized first. By using the session lock, the parental lock can be enabled or disabled during the current drive cycle (from when the ignition is switched on to switched off). When the session lock is on, the parental lock is available. When the session lock is off, the parental lock is temporarily cancelled. When canceling the parental lock or session lock, or when changing the PIN code, PIN code input is required. Proceed as follows: 1. Select the “Lock” icon. 2. If the selected channel is locked, input the PIN code to cancel the parental lock temporarily. 3. Select Reset PIN Code. 4. Input the default code [0000] using the number buttons. 5. Select OK. 6. Input the new PIN code using the number buttons. 7. Select OK. FIAT Connect 7.0 Selection From Channel List 21 HOW TO USE AUXILIARY JACK/USB PORT — IF EQUIPPED FIAT Connect 7.0 Audio can be heard from the vehicle's speakers by connecting a commercially available portable audio unit to the auxiliary jack. In addition, audio can be played from the vehicle audio device by connecting a USB device or an iPod to the USB port. Refer to “AUX/USB/iPod Mode”. Settings Note: Depending on the grade and specification, the screen display may icon on the home differ. Select the screen to display the Settings screen. Switch the tab and select the setting item you want to change. You can customize settings in the setup display as follows: Tab Item Function Display Refer To “Volume/Display/Sound Controls” Paragraph – Safety Blind Spot Monitoring Volume Other – Sound Refer To “Volume/Display/Sound Controls” Paragraph – Adjust Time Displays The Currently Set Time Is Displayed. Press + To Advance The Hour/Minute, And Select – To Move The Hour/Minute Back. AM/PM Can Only Be Selected With The 12-Hour Clock Display. GPS Sync When On Is Selected, “Adjust Time” Is Disabled. Time Format Changes The Display Between 12 And 24-Hour Clock Time. Time Zone Select Selects The Time Zone. Daylight Savings Time Turns The Daylight Saving Time Setting On/Off. When On, The Time Advances 1 Hour. When Off, It Returns To Normal Time. Clock 22 Use a commercially-available, non impedance (3.5 Ø) stereo mini plug lead. Item Function Vehicle Rain Sensing Wiper, Door Lock, Other – Bluetooth Refer To “Bluetooth Hands Free Outline” Network Management Wi-Fi Is Used To Obtain Navi Poi/Real Time Traffic Function (Such As Fuel Prices, Weather, Nearest Restaurant) Tool Tips Turns Button Explanations On/Off Language Changes The Language Temperature Changes The Setting Between Fahrenheit And Celsius Distance Changes The Setting Between Miles And Kilometers Devices System Music Database Update Supplementary Music Information (Such As Song Name, Artist Name) Voice Recognition Assistance For Play Artist Factory Reset Memory And Settings Are Initialized To The Factory Settings. The Initialization Launches By Selecting The Yes Button Agreements And Disclaimers Verify The Disclaimer And Agree Version Information Can Verify The Current Audio Unit OS Version About FIAT Connect 7.0 Tab 23 Applications Note: Depending on the grade and specification, the screen display may differ. Select the applications icon on the home screen to display the Applications screen. FIAT Connect 7.0 The following information can be verified: AUDIO CONTROL SWITCH OPERATION USB Audio/Bluetooth/ Audio — If Equipped Adjust The Volume Push the seek switch to skip forward to the beginning of the next track. To increase the volume: press up the volume switch (+). To decrease the volume: press down the volume switch (–). Top System Item Seek Switch Fuel, Economy, Monitor, Settings Fuel, Consumption Control Status, Effectiveness, Display, Settings AM/FM Radio Maintenance Scheduled, Maintenance, Tire Rotation, Oil Change Warning Guidance Warnings Currently Active Can Be Verified. Push the seek switch . The radio switches to the next/previous stored station in the order that it was stored. Push and hold the seek switch to seek all usable stations at a higher or lower frequency whether programmed or not. Radio stations which have been previously stored in the favorite radio can be called up by pushing the seek while any radio station switch stored in the favorite radio is being received. Radio stations can be called up in the order they were stored with each press . of the switch 24 within a few Push the seek switch seconds after playback begins to track down to the beginning of the previous track. after a few Push the seek switch seconds have elapsed to start playback from the beginning of the current track. Push and hold the seek switch to continuously switch the tracks up or down. Aha/Stitcher Radio Push the seek switch to skip forward to the beginning of the next track. to Push and hold the seek switch evaluate the playback of the current song as “Like”. to Push and hold the seek switch evaluate the playback of the current song as “Dislike”. Push the mute switch once to mute audio, press it again to resume audio output. Note: If the ignition is switched off with the audio muted, the mute will be cancelled. Therefore, when the engine is restarted, the audio is not muted. To mute the audio again, push the mute switch. AUX/USB/IPOD MODE — IF EQUIPPED Warning! Note: The SD card slot is for the navigation system. For vehicles with the navigation system, the SD card (FCA genuine) with stored map data is inserted into the SD card slot and used. Do not adjust the portable audio unit or a similar product while driving the vehicle: Adjusting the portable audio unit or a similar product while driving the vehicle is dangerous as it could distract your attention from the vehicle operation which could lead to a serious accident. Always adjust the portable audio unit or a similar product while the vehicle is stopped. Audio can be heard from the vehicle's speakers by connecting a commercially-available portable audio unit to the auxiliary jack. A commercially-available, nonimpedance (3.5 Ø) stereo mini plug lead is required. Contact a authorized dealer for details. In addition, audio can be played from the vehicle audio device by connecting a USB device or an iPod to the USB port. 06020700122001 1 - USB port (vehicle is fitted with 2 USB ports) 2 - Auxiliary Jack FIAT Connect 7.0 Mute Switch 25 Note: FIAT Connect 7.0 Always close the auxiliary jack/USB port lid when it is not in use. If foreign matter or liquid penetrates the auxiliary jack/USB port, it may cause a malfunction. 26 Depending on the portable audio device, noise may occur when the device is connected to the vehicle accessory socket (if noise occurs, do not use the accessory socket). This mode may not be usable depending on the portable audio device to be connected. Before using the auxiliary jack/USB port, refer to the instruction manual for the portable audio device. Use a commercially-available, non-impedance (3.5 Ø) stereo mini plug for connecting the portable audio unit to the auxiliary jack. Before using the auxiliary jack, read the manufacturer's instructions for connecting a portable audio unit to the auxiliary jack. To prevent battery discharge, do not use the auxiliary input for long periods with the engine off or idling. When connecting a device to the auxiliary jack or USB port, noise may occur depending on the connected device. If the device is connected to the vehicle's accessory socket, the noise can be reduced by unplugging it from the accessory socket. How To Connect The USB Port/Auxiliary Jack Warning! Do not allow the connection plug cord to get tangled with the parking brake or the shift lever (manual transmission/gear selector (automatic transmission). Allowing the plug cord to become tangled with the parking brake or the gear selector manual transmission/gear selector (automatic transmission) is dangerous as it could interfere with driving, resulting in an accident. Connecting A Device Proceed as follows: 1. If there is a cover on the AUX jack or USB port, remove the cover. 2. Connect the connector on the device to the USB port. Connecting With A Connector Lead Proceed as follows: 1. If there is a cover on the AUX jack or USB port, remove the cover. 2. Connect the device plug/connector lead to the auxiliary jack/USB port. Note: Do not place objects or apply force to the auxiliary jack/USB port with the plug connected. Insert the plug into the auxiliary jack/USB port securely. Insert or pull out the plug with the plug perpendicular to the auxiliary jack/USB port hole. Insert or remove the plug by holding its base. How To Use AUX Mode Select the icon on the home screen to display the Entertainment screen and then select “Audio Source”. Icon Select AUX to switch to the AUX mode. The following icons are displayed in the lower part of the center display. Function Displays sound settings to adjust audio quality level. Refer to “Volume/Display/Sound controls” paragraph. Note: If a device is not connected to the auxiliary jack, the mode will not switch to the AUX mode. Adjust the audio volume using the portable audio device, commander switch, or audio control switch. Audio adjustments can also be made using the portable audio device's volume setting. If the connection plug is pulled out from the auxiliary jack while in AUX mode, noise may occur. How To Use USB Mode — If Equipped Type Playable Data USB mode MP3/WMA/AAC/OGG file FIAT Connect 7.0 Displays the Entertainment menu. Use to switch to a different audio source. Note: This unit does not support a USB 3.0 device. In addition, other devices may not be supported depending on the model or OS version. USB devices formatted to FAT32 are supported (USB devices formatted to other formats such as NTFS are not supported). 27 Playback Select the icon on the home screen to display the Entertainment screen and the select “Audio Source”. Icon Select USB 1 or USB 2 to switch the USB mode. The following icons are displayed in the lower part of the center display. Function FIAT Connect 7.0 Displays the entertainment menu. Use to switch to a different audio source. Category list is displayed. Current track list is displayed. Select a desired track to play it. Plays the current track repeatedly. Select it again to play the tracks in the current track list repeatedly. When selected again, the function is cancelled. Tracks in the current track list are played randomly. Select it again to cancel. Select the desired song from the category list to cancel more like this. If selected within a few seconds from the beginning of a song which has started to play, the previous song is selected. If more than a few seconds have elapsed, the song currently being played is replayed from the beginning. Long-press to fast reverse. It stops when you remove your hand from the icon or the multimedia control knob. Track is played. When selected again, playback is temporarily stopped. Advances to the beginning of the next song. Long-press to fast forward. Displays sound settings to adjust audio quality level. Refer to “Volume/Display/Sound Controls” paragraph. To move to the desired location on the track, move the slider indicating the playback time. The appearance of the repeat and shuffle icons changes depending on the type of operation in which the function is used. 28 Category List Select the icon to display the following category list. Category Function Playlist Displays Playlists on the device. Artist Displays the artist name list. All the tracks or tracks for each album of the selected artist can be played. Album Displays the album name list. Song All the tracks in the device are displayed. Genre Displays the genre list. All the tracks or tracks per album or artist in the selected genre can be played. Audiobook Displays the Audiobook list. Chapters can be selected and played. Podcast Displays the Podcast list. Episode can be selected and played (special service for some apple devices). Folder Displays the folder/file list. Example Of Use (To Play All Tracks In USB Device) Method 1 Proceed as follows: 1. Select to display the category list. 2. Select Song. All the tracks in the USB device are displayed. 3. Select a desired track. The selected track is played. All the tracks in the USB device can be played by continuing playback. Note: Only the tracks in the desired category selected in Step Two are played. Method 2 (*) Proceed as follows: 1. Select to display the category list. 2. Select Folder. All the folders in the USB device are displayed. 3. Select All Songs. All the tracks in the USB device are displayed. 4. Select a desired track. The selected track is played. All the tracks in the USB device can be played by continuing playback. (*) Can be operated using an Android device or USB flash memory. FIAT Connect 7.0 Select a desired category and item. Note: Only the tracks in the desired folder selected in Step Three are played. 29 BLUETOOTH FIAT Connect 7.0 Bluetooth Hands Free Outline 30 When a Bluetooth device (mobile phone) is connected to the vehicle's Bluetooth unit via radio wave transmission, a call can be made or received by pressing the talk button, pickup button, or hang-up button on the multimedia control knob, or by operating the center display. For example, even if a device (mobile phone) is in your coat pocket, a call can be made without taking the device (mobile phone) out and operating it directly. Warning! ALWAYS drive safely with your hands on the wheel. You have full responsibility and assume all risks related to the use of the features and applications in this vehicle. Only use these features and applications when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. Bluetooth Audio Outline Component Parts When a portable audio unit equipped with the Bluetooth communication function is paired to the vehicle, you can listen to music stored on the paired portable audio device from the vehicle's speakers. Microphone (Hands-Free) The microphone is used for speaking voice commands or when making a Hands-free call. It is not necessary to connect the portable audio device to the vehicle's external input terminal. After programming, operate the vehicle audio control panel to play/stop the audio. Note: For your safety, a device can be paired only when the vehicle is parked. If the vehicle starts to move, the pairing procedure will end. Park the vehicle in a safe place before pairing. The communication range of a Bluetooth equipped device is about 10 meters or less. Basic audio operation is available using voice commands even if Bluetooth is not connected. Some Bluetooth mobile devices are not compatible with the vehicle. Contact an authorized dealer for information regarding Bluetooth mobile device compatibility. 06010904135005 Talk button / Pick-Up Button And Hang-Up Button (Handsfree) The basic functions of Bluetooth Hands-Free can be used for such things as making calls or hanging up and hang-up using the talk pick-up buttons on the steering wheel. Bluetooth Preparations The Volume Control Knob, near the Multimedia Control Knob, is used for volume adjustment and display operation. Tilt or turn the Multimedia Control Knob to move the cursor. Press the Multimedia Control Knob to select the icon. To use Bluetooth audio and HandsFree, the device equipped with Bluetooth has to be paired to the unit using the following procedure. Volume Adjustment The volume dial of the multimedia control knob is used to adjust the volume. Turn the dial to the right to increase volume, to the left to decrease it. The volume can also be adjusted using the volume button on the steering wheel. Note: If the volume is lower compared to other audio modes, increase the volume from the device side. Conversation volume and the volume of the voice guidance and ringtone can each be set in advance. Proceed as follows: 1. Select the phone icon on the home screen to display the Communication screen. 2. Select Setting. 3. Adjust the Phone Volume and the VR and Ringtone using the slider. Device Pairing A maximum of seven devices including Bluetooth audio devices and hands-free mobile phones can be paired. Note: The Bluetooth system may not operate for 1 or 2 minutes after the ignition is switched to ACC or ON. However, this does not indicate a problem. If the Bluetooth system does not connect automatically after 1 or 2 minutes have elapsed, make sure that the Bluetooth setting on the device is normal and attempt to reconnect the Bluetooth device from the vehicle side. Pairing Procedure Proceed as follows: 1. Select the icon on the home screen to display the Settings screen. 2. Select the Devices tab. 3. Select Bluetooth. 4. Turn the Bluetooth setting on. 5. Select “Add New Device” to display the message and switch to the device operation. 6. Using your device, perform a search for the Bluetooth device (Peripheral device). 7. Select “124 Spider” from the device list searched by the device. 8. Device with Bluetooth version 2.0 Input the displayed 4-digit pairing code into the device. Device with Bluetooth version 2.1 or higher: Make sure the displayed 6-digit code on the audio is also displayed on the device, and touch the Yes. Connection permission and phonebook access permission for your mobile device may be required depending on the mobile device. 9. If pairing is successful, the functions of the device connected to Bluetooth are displayed. Note: When Call history and messages are downloaded automatically, each automatic download setting must be on. Refer to “Communication Settings” paragraph. FIAT Connect 7.0 Volume Control Knob — If Equipped After a device is registered, the system automatically identifies the device. By activating Bluetooth Hands-Free again, or by activating Bluetooth Hands-Free first after switching the ignition from OFF to ACC, the device connection condition is indicated in the center display. 31 Note: About pairing and automatic reconnecting: FIAT Connect 7.0 If pairing is redone on the same mobile phone device, first clear “124 Spider” displayed on the Bluetooth setting screen of the mobile device. When the OS of the device is updated, the pairing information may be deleted. If this happens, reprogram the pairing information to the Bluetooth unit. Before you pair your device, make sure that Bluetooth is “ON”, both on your phone and on the vehicle. 3. Select Bluetooth. 4. Turn the Bluetooth setting on. 5. Select the device name which you would like to delete. 6. Select Unpair This Device. 7. Select Yes. Note: The following functions can be used for the Hands-free or audio. Proceed as follows: 1. Select the icon on the home screen to display the Settings screen. 2. Select the Devices tab. 3. Select Bluetooth. 4. Select Custom Settings. 5. Select Unpair All/Paired Devices. 6. Select Yes. Hands-free: phone calls and E-mail/SMS Audio: Bluetooth audio, Pandora, Aha, Stitcher radio Device Selection Disconnecting A Device If several devices have been paired, the Bluetooth unit links the device last paired. Proceed as follows: 1. Select the icon on the home screen to display the Settings screen. 2. Select the Devices tab. 3. Select Bluetooth. 4. Turn the Bluetooth setting on. 5. Select the device name which is currently connected. 6. Select Disconnect. If you would like to link a different paired device, it is necessary to change the link. The order of device priority after the link has been changed is maintained even when the ignition is switched off. Connecting Other Devices Proceed as follows: 1. Select the icon on the home screen to display the Settings screen. 2. Select the Devices tab. 3. Select Bluetooth. 4. Turn the Bluetooth setting on. 32 5. Select the name of the device you would like to connect. 6. Phone And Audio selection Connects both devices as hands-free and Bluetooth audio. Phone Only selection Connects as a hands-free device. Audio Only selection Connects as Bluetooth audio. Deleting A Device Proceed as follows: 1. Select the icon on the home screen to display the Settings screen. 2. Select the Devices tab. Deleting All Devices Changing PIN Code PIN code (4 digits) can be changed. Proceed as follows: 1. Select the icon on the home screen to display the Settings screen. 2. Select the Devices tab. 3. Select Bluetooth. 4. Select Custom Settings. 5. Select Change Pairing Code. 6. Input the new PIN code to be set. Available Language Ending Voice Recognition Cancel The Bluetooth Hands-Free System applies to the following languages: Use one of the following methods: To put the Bluetooth Hands-Free system in standby mode, say, “Cancel” while in voice recognition mode. Push the hang-up button. Say, “Cancel”. Spanish Refer to “Settings” paragraph. Operate the commander switch or the center display (only when vehicle is stopped). Voice Recognition Skipping Voice Guidance (For Faster Operation) French Push and release the talk button. Warning! ALWAYS drive safely with your hands on the wheel. You have full responsibility and assume all risks related to the use of the features and applications in this vehicle. Only use these features and applications when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. Troubleshooting For Voice Recognition If you do not understand an operation method while in the voice recognition mode, say “Tutorial” or “Help”. Commands Usable Anytime During Voice Recognition In this section, the basic operation of the voice recognition is explained. “Go Back” and “Cancel” are commands which can be used at anytime during voice recognition. Activating Voice Recognition Returning to previous operation Push the talk button. To return to the previous operation, say, “Go Back” while in voice recognition mode. Deterioration In Rate And Quality of Voice Recognition To Prevent A Deterioration In The Voice Recognition Rate And Voice Quality, The Following Points Should Be Observed: The voice recognition cannot be performed while voice guidance or the beep sound is operating. Wait until the voice guidance or the beep sound is finished before saying your commands. Phone related commands are available only when your phone is connected via Bluetooth. Make sure your phone is connected via Bluetooth before you operate phone related voice commands. Music play commands, such as Play Artist and Play Album can be used only in USB audio mode. FIAT Connect 7.0 English Do not speak too slowly or loudly (do not yell). Speak clearly, without pausing between words or numbers. 33 Close the windows and/or the convertible top to reduce loud noises from outside the vehicle, or turn down the airflow of the air-conditioning system while Bluetooth Hands-Free is being used. Audio Operation Using Voice Recognition Make sure the vents are not directing air up towards the microphone. When the talk button is pressed and the following command is spoken aloud, the audio can be operated. Note: If the voice recognition performance is not satisfactory. Refer to “ Voice Recognition Related Problems” paragraph. The commands in the ( ) can be omitted. The specified name and number are put into the { }. Voice Command Function Corresponding Audio Source (Go To/Play) AM (Radio) Switches the audio source to AM radio All (Go To/Play) FM (Radio) Switches the audio source to FM radio All Dialects or different wording other than hands-free prompts cannot be recognized by voice recognition. Speak in the wording specified by the voice commands. FIAT Connect 7.0 It is not necessary to face the microphone or approach it. Speak the voice commands while maintaining a safe driving position. 34 Main Audio Operation The below commands are examples of the available commands. (Go To/Play) Satellite (Radio) Switches the audio source to satellite radio All (Go To/Play) Bluetooth (Audio) Switches the audio source to BT audio All (Go To/Play) Aha (Radio) Switches the audio source to Aha radio All (Go To/Play) Stitcher Switches the audio source to Stitcher radio All (Go To/Play) USB 1 Switches the audio source to USB 1 All (Go To/Play) USB 2 Switches the audio source to USB 2 All Play Playlist {Playlist name} Plays the selected Playlist USB Play Artist {Artist name} Plays the selected artist USB Play Album {Album name} Plays the selected album USB Voice Command Function Corresponding Audio Source Play Genre {Genre name} Plays the selected genre USB Play Folder {Folder name} Plays the selected folder USB Note: Some commands cannot be used depending on devices and use conditions. Making A Call Screen Operation Automatic Downloading Phonebook Usage Proceed as follows: 1. Select the phone icon on the home screen to display the Communication screen. 2. Select Contacts to display the contact list. 3. Select the contact you would like to call to display the details for the contact. 4. Select the desired phone number to make the call. The “Auto Download Contacts” setting must be on. When hands-free is connected to the device, the phonebook is downloaded automatically. Telephone calls can be made by saying the contact name in the downloaded phonebook or the name of a person whose phone number has been registered in the Bluetooth Hands-Free. Refer to Import Contact (download Phonebook). Proceed as follows: 1. Press the talk button. 2. Wait for the beep sound. 3. Say: “Call XXXXX... (Ex. “John”) Mobile”. 4. Follow the voice guidance to place the call. Import Contact (Download Phonebook) Phonebook data from your device (Mobile phone) can be sent and registered to your Bluetooth HandsFree phonebook using Bluetooth. Manually Downloading If the “Auto Download Contacts” setting is off, download the phonebook using the following procedure. Proceed as follows: 1. Select the phone icon on the home screen to display the Communication screen. 2. Select Contacts to display the contact list. 3. Select Edit Contacts. 4. Select Import All Contacts or Import Selected Contact to switch to the device operation. FIAT Connect 7.0 If the Bluetooth device, USB, or AUX is not connected, the related commands cannot be used. 35 5. If Import All Contacts is selected, select Download. 6. Download will be started from the mobile phone. Note: FIAT Connect 7.0 If “Import All Contacts” is performed after saving the phonebook to the Bluetooth unit, the phonebook will be overwritten. A maximum of 1000 contacts can be registered to the phonebook. Phonebook, incoming/outgoing call record, and favorite memories are exclusive to each mobile phone to protect privacy. Favorites Contacts A maximum of 50 contacts can be registered. It will take less time to make a call after registering the telephone number. In addition, you do not have to look for the person you want to call in the phonebook. Registering to your favorites Proceed as follows: 1. Select the phone icon on the home screen to display the Communication screen. 36 2. Select Favorites to display the favorites list. 3. Select Add/Edit Communication Favorites. 4. Select Add New Contact or Add New Contact Details. 5. Select from the displayed list. Note: When “Add New Contact” is selected, information such as the selected person’s name is also registered. In addition, when “Add New Contact Details” is selected, only the telephone number of the selected person is registered. Making a call from your favorites Proceed as follows: 1. Select the phone icon on the home screen to display the Communication screen. 2. Select Favorites to display the favorites list. 3. Only one phone number is registered to contact. Select the contact information you would like to call. Select Yes. Multiple phone numbers are registered to contact Select the contact you would like to call to display the screen indicating the details for the contact. Go to next step. 4. Select the phone number you would like to call. 5. Select Yes. Deleting from your favorites Proceed as follows: 1. Select the phone icon on the home screen to display the Communication screen. 2. Select Favorites to display the favorites list. 3. Select Add/Edit Communication Favorites. 4. Select Delete. 5. Select the contact information which you would like to delete. 6. Select Delete. Changing the display order of your favorites list Proceed as follows: 1. Select the phone icon on the home screen to display the Communication screen. 2. Select Favorites to display the favorites list. 3. Select Add/Edit Communication Favorites. 4. Select Move. Changing contact name of your favorites Proceed as follows: 1. Select the phone icon on the home screen to display the Communication screen. 2. Select Favorites to display the favorites list. 3. Select Add/Edit Communication Favorites. 4. Select Rename. 5. Select the contact to display the keyboard screen. 6. If a new name is input and OK is selected, the contact name is stored. Note: If the contact is long-pressed when the favorites list is displayed, the contact information can be edited (deleted, moved). Telephone Number Input Note: Practice this while parked until you are confident you can do it while driving in a non-taxing road situation. If you are not completely comfortable, make all calls from a safe parking position, and only start driving when you can devote your full attention to driving. Proceed as follows: 1. Select the phone icon on the home screen to display the Communication screen. 2. When Dial Phone is pressed, the dial pad is displayed. 3. Input the telephone number using the dial pad. 4. Select to make the call. Numeral or symbol entry Use the dial pad. Long-press to input +. Select the back button to delete the currently input value. Long-press to delete all input values. Radial Function Makes a call to the last person called (latest person on outgoing call record) from the mobile phone/vehicle. Proceed as follows: 1. Press the talk button. 2. Wait for the beep sound. 3. Say: “Redial”. Call Back Function Makes a call to the last person who called your mobile phone/vehicle (latest person on incoming call record). Proceed as follows: 1. Press the talk button. 2. Wait for the beep sound. 3. Say: “Call back”. Receiving An Incoming Call When an incoming call is received, the incoming call notification screen is displayed. The “Incoming Call Notifications” setting must be on. Refer to “Communication Settings” paragraph. To accept the call, press the pick-up button on the audio control switch or select Answer on the screen. To reject the call, press the hang-up button on the audio control switch or select Ignore on the screen. FIAT Connect 7.0 5. The contact can be moved after it is selected. 6. Slide the contact or move it using the multimedia control knob, then select OK. The following icons are displayed on the screen during a call. Icons which can be used differ depending on use condition. 37 Icon Function Displays the Communication menu. Ends the call. FIAT Connect 7.0 Transferring A Call From Hands-Free To A Mobile Phone Communication between the Bluetooth unit and a device (mobile phone) is cancelled, and an incoming call will be received by the device (mobile phone) like a standard call Transferring A Call From A Device (Mobile Phone) To Hands-Free Communication between devices (mobile phone) can be switched to Bluetooth Hands-Free Mute The microphone can be muted during a call. When selected again, the mute is cancelled. A call is made to other person during a call and a 3-way call can be made. Select the contact from the following to make a call: Call History: Call History is displayed. Contacts: the phonebook is displayed. Dial: the dial pad is displayed. Input the phone number The device may be unusable depending on the contractual content. The call on hold is made to make a 3-way call. The device may be unusable depending on the contractual content. Switches the call on hold. DTMF (Dual Tone Multi-Frequency Signal) Transmission This function is used when transmitting DTMF via the dial pad. The receiver of a DTMF transmission is generally a home telephone answering machine or a company's automated guidance call centre. Input the number using a dial pad. 38 If the ignition is switched off during a hands-free call, the line is transferred to the device (Mobile phone) automatically. If the DTMF code has two or more digits or symbols, each one must be transmitted individually. Call Interrupt A call can be interrupted to receive an incoming call from a third party. The function may not be operable depending on the type of the telephone network and the mobile device. Receiving And Replying To Messages (Available Only With SMS Compatible Phones) SMS (Short Message Service) messages received by connected devices can be downloaded, displayed, and played (read by the system). When “Hold + Answer” is selected or the pickup button on the steering wheel is pressed, the current call is held and the system switches to the new incoming call. Additionally, replies can also be made to calls and messages in the received messages. When “End + Answer” is selected, the current call is ended and the system switches to the new incoming call (GSM network only). Up to 20 new messages can be downloaded and displayed from a connected device. When Ignore is selected or the hang-up button on the steering wheel is pressed, an incoming call is refused. Note: The function may not be available depending on the contractual content of the mobile device. Downloading Messages Automatic Downloading The “Auto Download SMS” (SMS) setting must be on. A message is downloaded automatically when the Bluetooth unit is connected to the device. Refer to “Communication settings” Paragraph. Manually Downloading When the “Auto Download SMS” (SMS) setting is off, the message is downloaded using the following procedure. 1. Select the icon on the home screen to display the Communication screen. 2. Select SMS to display the Inbox. 3. Select Update Inbox. 4. Download will be started from the mobile phone. Note: Attached data are not downloaded. Messages up to 1 kilobyte (e-mail)/140-bytes (SMS) can be downloaded. A message list is created for each device. If the connected device does not correspond to MAP 1.0, the AT command is used to download. The downloaded message indicates that it is already read. FIAT Connect 7.0 Note: Downloading using the AT command may not function depending on the connected device. 39 Receiving Messages Method 2 Method 1 Proceed as follows: 1. Select the phone icon on the home screen to display the Communication screen. 2. Select Notifications and display the new message list for e-mail and SMS. 3. Select the message you would like to display. FIAT Connect 7.0 When a device receives a message, a message received notification is displayed. The “SMS Notifications” (SMS) setting must be on. Refer to “Communication settings” paragraph. The following icons are displayed in the lower part of the details on the message. Icons which can be used differ depending on use conditions. Select Read and display the message. Icon Function Displays the Communication menu. Displays the inbox. Plays back a message. When selected again, playback is temporarily stopped. Displays the previous message. Displays the next message. Only replies to the sender of the currently displayed message. Select the sentence on the displayed reply screen and select the sentence for sending from the preset message. Select Send. Makes a call to a person who sent a message. For E-mail, this function may not work depending on the device. Deletes a message. The messages stored in a device is also deleted. Note: Up to three preset messages can be selected. 40 Proceed as follows: 1. Select the phone icon on the home screen to display the Communication screen. 2. Select Email to display the inbox. 3. Select the unread message displayed in bold. 4. The details of the message are displayed and replying to the message, making a call, or playback can be performed. Editing preset messages Proceed as follows: 1. Select the phone icon on the home screen to display the Communication screen. 2. Select Settings. 3. Select Preset Messages. 4. Select the preset message which you would like to edit. The keyboard screen is displayed. 5. When the message is input and the check mark is selected, the message is stored as a preset message. Note: Select the language. icon to change the Select the icon to switch between capitalized and lowercase characters. Select the icon to return to the previous screen without storing the edit. Communication Settings Select the phone icon on the home screen to display the Communication screen. Select Settings to change the setting. Item Setting Function Bluetooth — Go to Bluetooth setting menu. Refer to “Bluetooth Preparation” paragraph. Incoming Call Notifications On/Off Notifies when an incoming call is received. Auto Download SMS On/Off Downloads SMS automatically when the Bluetooth unit is connected to the device. SMS Notifications On/Off Notifies when a new SMS is received. Auto Download Call History On/Off Downloads call history automatically when the Bluetooth unit is connected to the device. FIAT Connect 7.0 Example of use (verify unread E-mail) 41 FIAT Connect 7.0 Item Setting Function Auto Download Contacts (*) On/Off Downloads the Phonebook automatically when the Bluetooth unit is connected to the device. Ringtone Fixed/In-Band/Off Changes the ringtone setting. Phone Volume Adjusts Using The Slider Adjusts the conversation volume VR And Ringtone Adjusts Using The Slider Adjusts the voice guidance and ringtone volume First Name / Last Name Displays the contact information in alphabetical order of the first name Last Name / First Name Displays the contact information in alphabetical order of the last name Preset Messages — Edits the preset message refer to “receiving and replying to messages (available only with SMS compatible phones)” paragraph Reset — Initializes all communication settings Contacts Sort Order (*) Depending on the device, it may be necessary to acquire download permission on the device side. Bluetooth Audio Response Profile A2DP (Advanced Audio Distribution Profile) Ver. 1.0/1.2 AVRCP (Audio/Video Remote Control Profile) Ver. 1.0/1.3/1.4 42 A2DP is a profile which transmits only audio to the Bluetooth unit. If your Bluetooth audio device corresponds only to A2DP, but not AVRCP, you cannot operate it using the control panel of the vehicle's audio system. In this case, only the operations on the mobile device are available the same as when a portable audio device for a non-compliant Bluetooth device is connected to the AUX terminal. AVRCP A2DP Ver. 1.0 Ver. 1.3 Ver. 1.4 Playback X X X X Pause X X X X File (Track) up/down — X X X Reverse — — X X Fast-Forward — — X X Text Display — — X X Repeat — — Depends On Device Depends On Device Shuffle — — Depends On Device Depends On Device Scan — — Depends On Device Depends On Device Folder up/down — — — Depends On Device X Available — Not available Note: The battery consumption of Bluetooth audio devices increases while Bluetooth is connected. If a general mobile phone device is USB connected during music playback over the Bluetooth connection, the Bluetooth connection is disconnected. For this reason, you cannot have music playback over a Bluetooth connection and music playback using a USB connection at the same time. FIAT Connect 7.0 Function The system may not operate normally depending on the Bluetooth audio device. 43 How To Use The Bluetooth Audio System Switching To Bluetooth Audio Mode FIAT Connect 7.0 To listen to music or voice audio recorded to a Bluetooth audio device, switch to the Bluetooth audio mode to operate the audio device using the audio system control panel. Any Bluetooth audio device must be paired to the vehicle's Bluetooth unit before it can be used. Refer to “Bluetooth Preparation” paragraph. Proceed as follows: 1. Turn on the Bluetooth audio device's power. 2. Switch the ignition to ACC or ON. Icon 3. Select the icon on the home screen to display the Entertainment screen. 4. When Bluetooth is selected, switches to the Bluetooth audio mode to begin playback. Note: If Bluetooth audio is used after using Pandora, Aha or Stitcher radio, the application on the mobile device has to be closed first. If the Bluetooth audio device does not begin playback, select the icon. Playback To listen to a Bluetooth audio device over the vehicle's speaker system, switch the mode to Bluetooth audio mode (refer to “Switching to Bluetooth Audio Mode” paragraph). After switching to the Bluetooth audio mode, the following icons are displayed in the lower part of the display. Icons which can be used differ depending on the version of the Bluetooth audio device which you are currently using. If the mode is switched from Bluetooth audio mode to another mode (radio mode), audio playback from the Bluetooth audio device stops. Function Displays the Entertainment menu. Use to switch to a different audio source. AVRCP Ver. 1.4 only Displays the top level folder/file list. Select the folder which you want to select. The files in the selected folder are displayed. Select the file you want to play. AVRCP Ver. 1.3 or higher Replays the song currently being played repeatedly. When selected again, the songs in the folder are played repeatedly. Select it again to cancel. Icons change when the song is repeated or the folder is repeated. 44 Icon Function AVRCP Ver. 1.3 or higher Plays songs in the folder in random order. When selected again, the songs on the device are played in random order. Select it again to cancel. Icons change during folder shuffle or device shuffle. Scans the titles in a folder and plays the beginning of each song to aid in finding a desired song. When selected again, the beginning of each song on the device is played. When selected again, the operation is cancelled and the song currently being played continues. Plays the Bluetooth audio. When selected again, playback is temporarily stopped. Advances to the beginning of the next song. Long-press to fast forward. It stops when you remove your hand from the icon or the multimedia control knob. Displays sound settings to adjust audio quality level (refer to “Volume/Display/Sound Controls” paragraph). Example of use (when searching for a song from the top level of a device) Proceed as follows: 1. Select the icon to display the folder/file list at the top level. 2. When the folder is selected, folders/file lists in the folder are displayed. When the playlist is selected, the file list is displayed. 3. Select the desired song. 4. Select to move to a folder one level higher. FIAT Connect 7.0 Returns to the beginning of the previous song. Long-press to fast reverse. It stops when you remove your hand from the icon or the multimedia control knob. 45 Bluetooth Audio Device Information Display FIAT Connect 7.0 If a Bluetooth audio device is connected, the following information is displayed in the center display. 46 AVRCP Ver. Lower Than 1.3 AVRCP Ver. 1.3 AVRCP Ver. 1.3 Or Higher Device name X X X Remaining Battery Charge Of Device X X X Song Name — X X Artist Name — X X Album Name — X X Playback Time — X X Genre Name — X X Album Art Image — — — X Available — Not available Note: Some information may not display depending on the device, and if the information cannot be displayed, “Unknown - - -” is indicated. What is Pandora Pandora is free personalized Internet radio. Simply enter a favorite artist, track, genre, and Pandora will create a personalized station that plays their music and more like it. Rate songs by giving thumbs-up and thumbs-down feedback to further refine your station, discover new music and help Pandora play only music you like. Icon Note: Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission. To operate Pandora from your Bluetooth device, perform the following in advance: Create Pandora account on the Web. Create Pandora station using Pandora application. Install Pandora application on your device. Playback Launch the Pandora app on the device and select the icon on the home screen to display the Entertainment screen. When is Pandora selected, the following icons are indicated in the bottom part of the center display. Function Displays the entertainment menu. Use to switch to a different audio source. Displays the station list. Use to switch to other stations. Thumbs-up Press the icon to tell Pandora “you like this track” and it helps to bring in more tracks like it to your station. Thumbs-down Press the icon to tell Pandora not to play this track. FIAT Connect 7.0 How To Use Pandora Bookmarking Bookmarks the song or artist currently being played. Bookmarks the song or artist currently being played. 47 Icon Function Goes to the next song. Displays sound settings to adjust audio quality level. Refer to “Volume/Display/Sound Controls” paragraph. Note: FIAT Connect 7.0 The skip function may not be available depending on the device. The number of skips is limited by Pandora. If the icon is selected when the skip song function is running, the next song is skipped. Selection From Station List Selection can be made from a programmed radio station list. 1. Select the icon. 2. Select the desired radio station. Note: When Shuffle is selected, songs randomly selected from the radio station list are played. Selecting the sort method The displayed order of the station list can be changed. 1. Select the icon. 2. Select Sort By. 48 3. Select Date to display in the order starting from the newly created station. 4. Select A-Z to display in alphabetical order. How To Use Aha Note: The displayed order of Shuffle cannot be changed. Stay connected to your friends activities by getting updates from Facebook and Twitter. Bookmarking You can bookmark song or artist to check out later on the Web. 1. Select the flag icon. 2. Select Bookmark Song to bookmark the song. 3. Select Bookmark Artist to bookmark the artist. Aha is an application which can be used to enjoy various Internet content such as Internet radio and podcasts. Using the location-based service, nearby services and destinations can be searched or real time local information can be obtained. For details on Aha, refer to “http://www.aharadio.com/”. The service content provided by Aha varies depending on the country in which the user resides. In addition, the service is not available in some countries. Icon To operate Aha from your Bluetooth device, perform the following in advance: – Install the Aha application to your device. – Create an Aha account for your device. – Log onto Aha using your device. – Select the preset station on your device. Playback Select the icon on the home screen to display the Entertainment screen. When Aha is selected, the following icons are displayed at the bottom of the center display. The displayed icon differs depending on the selected station. In addition, icons other than the following icons may be displayed. Function Displays the Entertainment menu. Use to switch to a different audio source. Displays the main menu. Use to switch to other stations. Displays the content list. Use to switch to other desired content on the station. Shout Records voice. Records voice and posts it as playable audio to Facebook and other social stations. Like (*) Evaluates the current content as “Like”. FIAT Connect 7.0 Note: Aha, the Aha logo, and the Aha trade dress are trademarks or registered trademarks of Harman International Industries, Inc., used with permission. Dislike (*) Evaluates the current content as “Dislike”. 49 Icon Function Reverses for 15 seconds. FIAT Connect 7.0 Map (vehicles with navigation system) Displays the destination searched by the location based services on the navigation system. Call A call can be made to the telephone number of a shop searched using the Location Based Services. Available when a device is connected as a Hands-Free. Returns to the previous content. Pauses playback of the content. When selected again, playback resumes. Goes to the next content. Fast-forwards for 30 seconds. Displays sound settings to adjust audio quality level (refer to “Volume/Display/Sound controls” paragraph). (*) Some stations may use alternate variations of Like and Dislike, based on station type or provider. 50 Note: The available Location Based Services may differ because the services depend on the content provided by Aha. Main Menu Select the icon. 4. Select the icon to display the content list. Selection of other destinations from the list can be made. Proceed as follows: 1. Select the desired station from the Nearby tab on the main menu. The destination name or address playback starts in the order of the destination name list. 12000000002002 12000000004004 Switch the tab and select the station category. Tab Function Presets Displays the preset station list set on the device. Select the preset station name to play the station content. Nearby Select the desired station. Guidance is provided to the searched destination near the vehicle's position. You can designate desired categories previously set using the filter setting on your device. Shout 12000000003003 2. When the icon is selected, the currently displayed destination is displayed on the navigation system (vehicles with navigation system). 3. When the icon is selected, a phone call is placed to the currently displayed destination. Some social stations, such as Facebook or Caraoke, support the ability to record and share voice messages using the “Shout” function. 1. Select the icon and start the countdown (3, 2, 1, 0). Recording starts when the countdown reaches zero. 2. Records voice. 3. Select Save and store/post the recording. FIAT Connect 7.0 Example Of Use (Location Based Services) Note: Recordable time varies depending on the station (max. 30 seconds). Recording stops automatically when the recordable time has elapsed. You can then post or delete the recording. 51 How To Use Stitcher Radio — If Equipped FIAT Connect 7.0 What Is Stitcher Radio Stitcher radio is an application which can be used to listen to Internet radio or stream podcasts. Recommended content is automatically selected by registering content which you put into your favorites or by pressing the Like or Dislike button. For details on Stitcher Radio, refer to “http://stitcher.com/”. Icon (*) Stitcher, the Stitcher logo, and the Stitcher trade dress are trademarks or registered trademarks of Stitcher, Inc., used with permission. Note: To operate Stitcher Radio from your Bluetooth device, perform the following in advance: Install the Stitcher Radio application to your device; Log onto Stitcher Radio using your device. Playback Select the icon on the home screen to display the Entertainment screen. When Stitcher is selected, the following icons are indicated in the bottom part of the center display. Create a Stitcher Radio account for your device; Function Displays the entertainment menu. Use to switch to a different audio source. Displays the main menu. Use to switch to other stations. Dislike Evaluates the current content as “Dislike”. Like Evaluates the current content as “Like”. Adds the current station to your favorites or deletes the current station from your favorites. Reverses for 30 seconds. 52 Icon Function Plays the station. Select it again to pause playback. Goes to the next station. 2. Select the station name which you want to register. 3. Select OK to add the program to the selected favorites station. Station List Proceed as follows: 1. Select the icon to display the station list. 2. Favorite (1) station name: select to display the program registered to your favorites. 3. Category (2) name: a recommended category selected from your favorites by Stitcher is displayed. Select it to display the category program. Note: Multiple favorites stations can be selected and registered. 12000000005005 Favorites stations registered by oneself as well those set by default are displayed. Select the program name to play it. Delete from your favorites Add to your favorites If the current program has not been registered to your favorites, it can be registered to your favorites. If the current program has already been registered to your favorites, the program can be deleted from your favorites. Proceed as follows: 1. Select the icon to display the favorite station of which the registration can be added. Proceed as follows: 1. Select the icon. 2. The program is automatically deleted from the favorites stations. FIAT Connect 7.0 Displays sound settings to adjust audio quality level (refer to “Volume/Display/Sound Controls” paragraph). 53 TROUBLESHOOTING Bluetooth Hands-Free Customer Service If you have any problems with Bluetooth, contact an authorized dealer. FIAT Connect 7.0 Symptom Bluetooth Device Pairing (Connection Problems) Note: For more information and device compatibility, please refer to www.FiatConnect.com Cause Solution Method Unable To Perform Pairing. — First make sure the device is compatible with the Bluetooth unit, and then check whether the Bluetooth function and the Find Mode/Visible setting (*) on the device are turned on. If pairing is still not possible after this, contact a authorized dealer. Pairing Cannot Be Performed Again. The pairing information paired to the Bluetooth unit or device is not recognized correctly. Clear “124 Spider” stored in the device Perform pairing again Unable To Perform Pairing. The Bluetooth function and the Find Mode/ Visible setting (*) on the device may turn off automatically after a period of time has elapsed depending on the device. Check whether the Bluetooth function and the Find Mode/Visible setting (*) on the device are turned on and pairing or reconnect. Disconnects Intermittently. The device is in a location in which radio wave interference can occur easily, such as in a bag or in a rear pocket of a pair of pants. Move the device to a location in which radio wave interference is less likely to occur. Does Not Connect Automatically When Starting The Engine. The pairing information is updated when the device OS is updated. Perform pairing again. Does Not Connect Automatically When Starting The Engine. Automatically Connects, But Then Disconnects Suddenly. (*) Setting which detects the existence of a device external to the Bluetooth unit 54 Perform pairing using the following procedure: Note: When the OS of the device is updated, the pairing information may be deleted. If this happens, reprogram the pairing information to the Bluetooth unit. If you pair your phone which has already been paired to your vehicle more than once in the past, you need to delete “124 Spider” on your mobile device. Then, execute the Bluetooth search on your mobile device once again, and pair to a newly detected “124 Spider”. Voice Recognition Related Problems Symptom Cause Solution Method Excessive, slow speech Poor Voice Recognition Excessive, forceful speech (shouting) Speaking before the beep sound has ended Loud noise (speaking or noise from outside/ inside vehicle) False Recognition Of Numbers Airflow from A/C is blowing against the microphone Regarding the causes indicated on the left, be careful with how you speak. In addition, when numbers are spoken in a sequence, recognition ability will improve if no stop is placed between the numbers. Speaking in off-standard expressions (dialect) Poor Voice Recognition There is a malfunction in the microphone. A poor connection or malfunction with the microphone may have occurred. Contact an authorized dealer. Phone-Related Voice Recognition Is Disabled. There is a problem with the connection between the Bluetooth unit and the device. If there is any malfunction after checking the pairing situation, check for device pairing or connection problems. FIAT Connect 7.0 Before you pair your device, make sure that Bluetooth is “ON”, both on your phone and on the vehicle. 55 Symptom Cause Solution Method By carrying out the following measures, the rate of recognition will improve. FIAT Connect 7.0 Names In The Phonebook Are Not Easily Recognized. 56 The Bluetooth system is under a condition in which recognition is difficult. Clear memory from the phonebook which is not used very often. Avoid shortened names, use full names (recognition improves the longer the name is. By not using names such as “Mom”, “Dad”, recognition will improve). When Operating The Audio, A Song Name Is Not Recognized. Song names cannot be recognized by voice. — You Want To Skip Guidance. — Guidance can be skipped by quickly pressing and releasing the Talk button. Regarding Problems With Calls Symptoms Cause Solution Method When starting a call, vehicle noise from the other party can be heard. For about three seconds after starting a call, the Bluetooth unit's Noise Suppression function requires time to adapt to the call environment. This does not indicate a problem with the device. The other party cannot be heard or the speaker's voice is quiet. The volume is set at zero or low. Increase the volume. Symptoms Cause Solution Method The indication for the remaining battery is different between the vehicle and the device. The indication method is different between the vehicle and the device. — When a call is made from the vehicle, the telephone number is updated in the incoming/outgoing call record but the name does not appear. The number has not been registered into the phonebook. If the number has been registered into the phonebook, the incoming/outgoing call record is updated by the name in the phonebook when the engine is restarted. The cell phone does not synchronize with the vehicle regarding the incoming/outgoing call record. Some types of cell phones do not synchronize automatically. Operate the cell phone for synchronization. It takes a long time to complete the function for changing the language. A maximum of 60 seconds is required. — FIAT Connect 7.0 Other Problems 57 NAVIGATION Navigation Menu Before Using The Navigation System You can reach all parts of the navigation system from the Navigation menu. Select and open the navigation menu. FIAT Connect 7.0 To use the navigation system, the SD card containing the map information needs to be inserted in the SD card slot. When inserting the SD card, never move the slider on the side of the SD card to the LOCK position. If the slider is set to LOCK, the SD card cannot be read and the navigation system will not operate. : Displays the screen where traffic information and the GPS reception conditions can be set and verified. : Cancels waypoint/route. : Finds Places nearby You can search for points of interest (POI) near the vehicle position. This SD card is valid for use in only one vehicle. Never use it in another vehicle. If the SD card is used first in one vehicle and then in another, the navigation system for either one of the vehicles may become inoperable. : Displays the route parameters and the route in its full length on the map. You can also perform routerelated actions such as editing or cancelling your route, picking route alternatives, avoiding parts of the route, simulating navigation or adding the destination to your Favorites. IL001 You have the following options: 12000000001001 58 : Adds a destination. Select your destination by entering an address or selecting a POI (point of interest), a location on the map or one of your Favorite destinations. You can also look up your recent destinations from the Smart History by entering the coordinates. If an Internet connection is available, Local Search can be of further help to find your destination. : Opens and closes the UMP (menu bar). The UMP (menu bar) is displayed on the lower part of the screen. : Changes View mode. The map view mode can be changed (2D north up/2D heading up/3D). : Switches to the Settings screen where you change navigation settings. Note: Some functions are not available depending on some countries and regions. Using Keyboards You only need to enter letters or numbers when you cannot avoid it. You can type with your fingertips on the full-screen keyboards and you can switch between various keyboard layouts, for example English, Greek or numerical. Task Instruction Correcting Your Entry On The Keyboard Select to remove the unneeded character(s). Select and hold the button to delete several characters or the entire input string Entering A Space, For Example Between A First Name And A Family Name Or In Multi-Word Street Names Select screen) (the button at the bottom center of the When entering a text, the first character appears in upper case while Entering Upper And Lower Case Letters the rest of the text is in lower case. Select to enter an upper case letter or select twice to turn on Caps Lock. Select again and lower case letters return. Select The Check Mark Accepting the suggested search result. Finalizing The Keyboard Entry Saving your input. Select . Opening the list of search results. Cancelling The Keyboard Entry (Returning To The Previous Screen) Select FIAT Connect 7.0 Buttons And Other Controls On The Screen . 59 Press And Hold You usually need to select the screen only once, however, some useful features can be accessed with combined touch screen selecting. Those are as follows: FIAT Connect 7.0 Action 60 Button(s) Detail Touching the button on the map screen once changes the scale in one step. Continuously touching the button changes the scale sequentially. Touching the button on the map screen once changes the point of view in one step. Continuously touching the button changes the point of view sequentially. Continue pressing the button Touching the button on the map screen once rotates the map. Continuously touching the button rotates the map sequentially. Touching the button on the keyboard screen once erases one character. Continuously touching the button erases several characters rapidly. Map Screen Navigation On The Map The data fields are different when you are navigating an active route and when you have no specified destination (the burgundy line is not displayed). Field Description Speed Limiter Symbol Shows the speed limit of the current road if the map contains it. Distance Traveled Shows the distance you need to travel on the route before reaching your final destination. Shows the estimated arrival time at the final destination of the route. If the navigation system is capable of receiving live traffic information, the calculation takes into account traffic delays affecting your route. This estimation can be inaccurate at times. Note: Some functions are not available depending on some countries and regions. FIAT Connect 7.0 GUID-230001-high.tif 61 Position Markers FIAT Connect 7.0 Selected Map Location (Cursor) And Selected Map Object You can mark a map location in the following ways: 1. Select the map during route guidance. 2. Select the map when asked so that the destination can be confirmed after the search is completed. 3. Select the destination from the map (see “Selecting A Map Location As The Destination”). When a map location is selected, the Cursor appears at the selected point on with a the map. A symbol combined crosshair and red circle is displayed for easy visibility of any map scale size. The location of the Cursor can be used as the destination of the route. You can search for a POI (point of interest), or you can save it as one of your Favorites destinations. You can also select some of the objects on the map. If you select the map at the icon of a POI (point of interest) or a traffic event, the object will be selected. You can then get information about this object or use it as a route point. 62 Note: Some functions are not available depending on some countries and regions. Objects On The Map Streets And Roads The navigation system shows the roads in different widths and colors so that they can be easily identified. A expressway will be thicker and a different color than a small street. Turn Preview And Next Street When navigating a route, the top section of the Map screen shows information about the next maneuver, street or town. There is an area at the top left part of screen which indicates the next operation. Displays both the event type (such as turning, detouring, exiting expressways), and the distance from the current position. When the next event approaches, the second event is displayed using a small icon. If there is no second event, only the next event is displayed. GUID-230002-high.tif Most of these icons are very intuitive. The same symbols are used in both fields: Icon Description Turn Left Turn Right Turn Back Bear Right Turn Sharp Left Keep Left Description Continue Straight In The Intersection Go Left/Right On The Roundabout, 3rd Exit (Next Maneuver) Enter Expressway Exit Expressway Board Ferry Leave Ferry Approaching A Waypoint If lane information is available in the map data, the navigation system displays the lanes and their directions using small arrows at the bottom of the map. Highlighted arrows represent the lanes and direction you need to take. Lane guidance is provided constantly if there is map information. Signposts are displayed at the top of the map. The color and style of the signposts are similar to the real ones you see above road or by the roadside. When navigating a route, only the signpost that points to the lane(s) to be taken is displayed in bright colors; all others are darker. All signposts and lane guidance arrows are displayed in vivid colors while driving (when there is no recommended route). If you want to hide the currently displayed signposts, touch anywhere and the normal Map screen returns until new signpost information is received. They show the available destinations and the number of the road the lane leads to. Approaching The Destination GUID-230008-high.tif Lane Information and Signposts When navigating on multilane roads, it is important to take the appropriate lane in order to follow the recommended route. FIAT Connect 7.0 Icon GUID-230007-high.tif 63 Junction View If you are approaching a highway exit or a complex intersection and the needed information exists, the map is replaced with a 3D view of the junction. Select this Open button to open a panel with the details of the next few exits or service stations. There are two types of settings for displaying the next expressway exit: one which constantly displays the next expressway exit while travelling on an expressway, or the other which displays the next expressway exit only when the menu panel is open. FIAT Connect 7.0 The optimum driving lane is indicated by an arrow, and road signs are displayed as additional information at the top of the screen. 64 GUID-230009-high.tif Applicable only when the setting is “Only When Menu Is Open”. GUID-230008-high.tif Highway Exit Services You may need to stop at a gas station or a restaurant during your journey. This feature displays a new button on the map when you are driving on highways. Select any of them to display the exit area on the map. You can now easily add this exit as a waypoint to your route if needed. GUID-230010-high.tif You can change the settings in Visual Guidance settings. Elements Of The Active Route Symbol Name Description Current Car Position Marker If there is a road close by, a blue-colored arrow symbol moves to the road which is the closest. The red mark present around a blue-colored arrow symbol indicates the correct GPS information. It may be indicated away from the road because there is no existing road information. Waypoint (Intermediate Destination) An intermediate destination of the route before reaching the final destination. Destination (End Point) The final destination of the route. Route Color The route always stands out with its color on the map, both in daytime and in nighttime mode. Streets And Roads That Are Excluded From The Navigation You can choose whether you want to use or avoid certain road types (see “Route Settings”). However, when the navigation system cannot avoid such roads, the route will include them and it will show them in a color that is different from the route color. Streets And Roads That Are Affected By Traffic Events Road segments may be affected by traffic events received. These streets and roads are displayed in an alternate color, and small symbols displayed along the route show the type of traffic event FIAT Connect 7.0 The navigation system shows the route in the following way: Note: Some functions are not available depending on some countries and regions. 65 Manipulating The Map By touching and dragging any part of the map screen, it can be moved to a location close to the currently displayed map. In addition, the map operation button is displayed, and by touching each of the buttons, you can zoom in and out of maps, change the map perspective and select a destination. FIAT Connect 7.0 GUID-230016-high.tif 66 Action Button(s) Description Map Movement Using Touch And Drag No Button You can move the map in any direction: select and hold the map, and move your finger towards the direction you want to move the map. Zooming In And Out Changes how much of the map is displayed on the screen. The navigation system uses high-quality vector maps that let you examine the map at various zoom levels, always with optimized content. Map scaling has a limit in 3D map view mode. If you zoom out further, the map switches to 2D view mode. Select the button once to modify the view in large steps, or select and hold the button to modify it continuously and smoothly. Tilting Up And Down Changes the vertical view angle of the map in 3D mode. Select the button once to modify the view in large steps, or select and hold the button to modify it continuously and smoothly. Button(s) Description Rotating Left And Right Changes the horizontal view angle of the map. Select the button once to modify the view in large steps, or select and hold the button to modify it continuously and smoothly. Compass The direction of the compass shows North. Select the button to switch to North-up view, and then select again to rotate the map in the previous direction. Open/Close The UMP (menu bar) is displayed on the lower part of the screen. Hides the displayed UMP if the UMP has been displayed. Select Destination Select this button to select the Cursor as a new destination. The route is automatically calculated. Return To Normal Navigation Select this button to move the map back to follow the current GPS position. Automatic map rotation is also re-enabled. The map manipulation buttons disappear and navigation continues. When this button is selected, the map view mode can be changed: The map is displayed so that north is up regardless of the direction of travel. 2D Or 3D View FIAT Connect 7.0 Action The map is rotated so that the direction of travel is displayed in the upward direction. Displays things such as actual construction sites three dimensionally on the map. Zoom-In/Zoom- Out Mode You can zoom-in/zoom-out of maps. 67 FIAT Connect 7.0 Action Button(s) Rotate Mode Rotates maps. Perspective Angle Mode You can change the angle of perspective on a map. Check The Details Of The Current Position (Where Am I?) This screen contains information about the current position (or about the last known position if GPS reception is not available). On-Road Navigation You can set up your route in different ways. If you need a route for immediate navigation, you can select the destination and start navigating to it right away (normal navigation). You can plan routes with multiple destinations. Select the first destination. Then select a second destination and add it to your route to create a multi-point route. You can add as many destinations to your route as you like. GUID-230017-high.tif You can access this screen from the map in one of the following ways: 1. Select after selecting on the MAP screen. 2. Select the Where Am I? screen. 68 Description Selecting The Destination Of A Route The navigation system offers you several ways of choosing your destination: Enter a full address or a part of an address. Select a POI (point of interest) from a database as your destination. Search the destination from the map. Use a previously saved Favorite destination. Select a location from the History of previously used destinations. Enter the coordinates of the destination. Note: There are other convenient functions. Entering An Address Or A Part Of An Address If you know at least a part of the address, it is the quickest way to select the destination of the route. Using the same screen, you can find an address by entering: Destination address An intersection The midpoint of a street Note: If an address or part of a facility name is input, a search candidate list including the input characters is displayed. The greater the number of characters input the more the list is refined. Entering An Address To enter an address as the destination, do as follows: 1. Select screen. after selecting on the MAP 2. Select Find Address. 3. By default, the navigation system proposes the country and town where you are. If needed, select Country, enter the first few letters of the country name on the keyboard, and select one country from the list of results. 4. If needed, select a new town: A Select Town. B Start entering the name of the town on the keyboard. C Find the town you need: D The most likely town name is always shown in the input field. To accept . it, select E If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears ). Select the automatically, select town from the list. IL002 5. Enter the street name: A Select <street name> FIAT Connect 7.0 GUID-310001-high.tif The center of a town B Start entering the street name on the keyboard. C Find the street you need: D The most likely street name is always shown in the input field. . To accept it, select 69 FIAT Connect 7.0 E If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears ). Select the automatically, select street from the list. B Enter the house number on the keyboard. (To enter letters, select QWE). C Select to finish entering the address. (If the entered house number cannot be found, the midpoint of the street is selected as the destination). Note: Places Nearby: you can search for POI (point of interest) around the selected location. Add to Favorites: the selected location can be registered to Favorites. GUID-310007-high.tif GUID-310006-high.tif IL003 7. The selected location is shown on the map. The system transitions to the next screen by selecting, or it returns to the previous screen by selecting Navigate To or it returns to the previous . screen by selecting the button By touching the location displayed on the screen, you can change the destination to anywhere on the map. 8. Navigation Start if is selected, or after ten seconds of no user interaction. By touching the location displayed on the screen, you can verify the route. Additionally, the route can be revised by selecting other options. 6. Enter the house number: A Select House Number. GUID-310008-high.tif 70 Entering The Midpoint Of A Street As The Destination You can navigate to the midpoint of a street if the house number is not available: after selecting on the MAP 2. Select Find Address. GUID-310001A-high.tif 3. If necessary, modify the country and town as described earlier (see “Entering An Address”). 6. The selected location is shown on the map. The system transitions to the next screen by selecting Navigate To, or it returns to the previous screen by . By touching selecting the button the location displayed on the screen, you can change the destination to anywhere on the map. 4. Enter the street name: A Select <street name> B Start entering the street name on the keyboard. C Find the street you need: D The most likely street name is always shown in the input field. To . accept it, select E If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears ). Select the automatically, select street from the list. IL003 5. Instead of entering the house number, select “Select Street”. The midpoint of the street is selected as the destination. FIAT Connect 7.0 1. Select screen. GUID-310007-high.tif 71 Note: Places Nearby: you can search for POI (point of interest) around the selected location. FIAT Connect 7.0 Add to Favorites: the selected location can be registered to Favorites 72 7. Navigation starts if Start is selected, or after ten seconds of no user interaction. By touching the location displayed on the screen, you can verify the route. Additionally, the route can be revised by selecting other options. Selecting An Intersection As The Destination To enter an address as the destination, do as follows: 1. Select screen. after selecting on the MAP 2. Select Find Address. 3. If necessary, modify the country and town as described earlier. 4. Enter the street name: A Select <street name> B Start entering the street name on the keyboard. C Find the street you need: D The most likely street name is always shown in the input field. To . accept it, select GUID-310008-high.tif E If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears ). Select the automatically, select street from the list. IL003 5. Enter the intersecting street name: A Select <Intersecting Street> B If only a few intersecting streets exist, their list appears immediately. C In case of a longer street, the keyboard screen appears. Start entering the name of the intersecting street on the keyboard. As soon as the street names that match the entered string can be shown on one screen, their list appears automatically. Select the street from the list. 6. The selected location is shown on the map. The system transitions to the next screen by selecting Navigate To, or it returns to the previous screen by selecting the button. By touching the location displayed on the screen, you can change the destination to anywhere on the map. Selecting A Town Center As The Destination GUID-340001-high.tif Note: Places Nearby: you can search for POI (point of interest) around the selected location. Add to Favorites: the selected location can be registered to Favorites. IL004 7. Navigation starts if Start is selected, or after ten seconds of no user interaction. By touching the location displayed on the screen, you can verify the route. Additionally, the route can be revised by selecting other options. The town center is not the geometric center of the town but an arbitrary point on the map the creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is one of the important intersections. 1. Select screen. after selecting on the MAP 2. Select Find Address. FIAT Connect 7.0 GUID-310008-high.tif 3. If necessary, modify the country and town as described earlier (see “Entering An Address”). 73 4. Instead of entering the street name, select “Select Town Center”. This way the center of the displayed town becomes the destination of the route. Note: Places Nearby: you can search for POI (point of interest) around the selected location. FIAT Connect 7.0 Add to Favorites: the selected location can be registered to Favorites. 6. Navigation starts if Start is selected, or after ten seconds of no user interaction. By touching the location displayed on the screen, you can verify the route. Additionally, the route can be revised by selecting other options. GUID-310001B-high.tif 5. The selected location is shown on the map. The system transitions to the next screen by selecting Navigate To, or it returns to the previous screen by selecting the button. By touching the location displayed on the screen, you can change the destination to anywhere on the map. You can search for a POI (point of interest) by its category; You can search for a POI (point of interest) by its name. If the name for a POI (point of interest) is input, a search candidate list is displayed. One destination among the candidates can be selected. GUID-310008-high.tif You can select your destination from the POI (point of interest) included with the navigation system. 74 You can find frequently searched types of POI (point of interest) with only a few screen selects using the Preset search feature; Quick Search For A POI (Point Of Interest) Selecting The Destination From The POI (Point Of Interest) GUID-310007-high.tif Using the same screen, you can find a POI (point of interest) in different ways: You can quickly find a nearby POI (point of interest) by its name using the Quick search feature; Along the recommended route if it exists Around your current location if there is no destination given. Start the Quick search function: 1. Select after selecting on the MAP screen. 2. Select Find Places. Note: If an address or part of a facility name is input, a search candidate list including the input characters is displayed. The greater the number of characters input the more the list is refined. 6. The selected location is shown on the map. The system transitions to the next screen by selecting Navigate To, or it returns to the previous screen by the button. By touching selecting the location displayed on the screen, you can change the destination to anywhere on the map. Places Nearby: you can search for POI (point of interest) around the selected location. GUID-310011-high.tif GUID-310013-high.tif 3. Select Filter by Name. 5. After entering a few letters, select to open the list of POI (point of interest) with names containing the entered character sequence. Add to Favorites: the selected location can be registered to Favorites. 7. Navigation starts if Start is selected, or after ten seconds of no user interaction. By touching the location displayed on the screen, you can verify the route. Additionally, the route can be revised by selecting other options. FIAT Connect 7.0 Note: GUID-310012-high.tif 4. Using the keyboard, enter the name of the POI (point of interest). GUID-310014-high.tif GUID-310008-high.tif 75 Note: Searching For Help Nearby Places Nearby: you can search for POI (point of interest) around the selected location. The Preset search feature lets you quickly find the most frequently selected types of Places. 1. Select after selecting on the MAP screen, or select Find Places after as an alternative method. selecting FIAT Connect 7.0 GUID-310014-high.tif GUID-310015-high.tif 5. The selected location is shown on the map. The system transitions to the next screen by selecting Navigate To, or it returns to the previous screen by button. By touching selecting the the location displayed on the screen, you can change the destination to anywhere on the map. 2. In the Navigation menu, select Help Nearby. 3. Preset search categories appear, all for searching around the current position (or around the last known position if the current position is not available). 4. Select any of the quick search buttons to get an instant list of Places. GUID-310008-high.tif GUID-310007-high.tif 76 Add to Favorites: the selected location can be registered to Favorites. 6. Navigation starts if Start is selected, or after ten seconds of no user interaction. By touching the location displayed on the screen, you can verify the route. Additionally, the route can be revised by selecting other options. Searching For A POI (Point Of Interest) By Category You can search for Places of Interest by their categories and subcategories. A Select screen. Select to search for a place within a selected town (the result list will be ordered by the distance from the center of the selected town). F Select one of the main Place categories (e.g. Accommodation) or select “Search In All Categories” to list all Places around the selected location or along the route. after selecting on the MAP B Select Find Places. D Select the area around which the Place should be searched for: Select Find Places to search around the current position or if it is not available, around the last know position (the result list will be ordered by the distance from this position). GUID-310200-high.tif GUID-310202-high.tif E (Optional) If you have selected In a Town, select the town to search in. Select to search along the active route, and not around a given point. This is useful when you search for a later stopover that results in a minimal detour only, such as searching for upcoming gas stations or restaurants (the result list will be ordered by the length of the necessary detour). Select to search for a place around the destination of the active route (the result list will be ordered by the distance from the destination). G Select one of the Place subcategories (e.g. Hotel or Motel) or select “Search In All Categories” to list all Places in the selected main category around the selected location or along the route. FIAT Connect 7.0 C Select Area. GUID-310201-high.tif GUID-310203-high.tif 77 FIAT Connect 7.0 H Sometimes the list of brands in the selected Place subcategory appears. Select one brand or select “Search In All Categories” to list all Places in the selected subcategory around the selected location or along the route. J The selected location is shown on the map. The system transitions to the next screen by selecting Navigate To, or it returns to the previous screen by selecting the button. By touching the location displayed on the screen, you can change the destination to anywhere on the map. GUID-310014-high.tif I GUID-310008-high.tif GUID-310007-high.tif Select Search. Note: Places Nearby: you can search for POI (point of interest) around the selected location. Add to Favorites: the selected location can be registered to Favorites. GUID-310012A-high.tif 78 K Navigation starts if Start is selected, or after ten seconds of no user interaction. By touching the location displayed on the screen, you can verify the route. Additionally, the route can be revised by selecting other options. Searching For A POI (Point Of Interest) By Name You can search for Places of Interest by their names. You can search around different locations or along your route in the whole Place database or in one Place category or subcategory only. after selecting on the MAP 1. Select screen. 2. Select Find Places. 3. Select Area. 4. Select the area around which the Place should be searched for: Select Around Here to search around the current position or if it is not available, around the last know position (the result list will be ordered by the distance from this position). GUID-310200-high.tif 5. (Optional) If you have selected In a Town, select the town to search in. GUID-310202-high.tif 7. Select one of the Place subcategories (e.g. Hotel or Motel) to search in or select Filter by Name to search in the selected Place category. Select Around Destination to search for a place around the destination of the active route (the result list will be ordered by the distance from the destination). Select In a Town to search for a place within a selected town (the result list will be ordered by the distance from the center of the selected town). GUID-310201A-high.tif 6. Select one of the main Place categories (e.g. Accommodation) to search in or select Filter by Name to search among all Places. FIAT Connect 7.0 Select Along Route to search along the active route, and not around a given point. This is useful when you search for a later stopover that results in a minimal detour only, such as searching for upcoming gas stations or restaurants (the result list will be ordered by the length of the necessary detour). GUID-310203-high.tif 79 FIAT Connect 7.0 8. Select Filter by Name if you have not done it before. 10. After entering a few letters, select to open the list of Places with names containing the entered character sequence. GUID-310204-high.tif GUID-310016-high.tif 9. Using the keyboard, start entering the name of the Place. 11. The selected location is shown on the map. The system transitions to the next screen by selecting Navigate To, or it returns to the previous screen by button. By touching selecting the the location displayed on the screen, you can change the destination to anywhere on the map. Note: GUID-310013-high.tif Places Nearby: you can search for POI (point of interest) around the selected location. Add to Favorites: the selected location can be registered to Favorites. 80 12. Navigation starts if Start is selected, or after ten seconds of no user interaction. By touching the location displayed on the screen, you can verify the route. Additionally, the route can be revised by selecting other options. GUID-310008-high.tif Searching For A Place Using Local Search (Only Some Countries And Region) If you have an Internet connection, you can search for places using the Local Search service. 1. Select after selecting on the MAP screen. 2. Select Local Search. Note: Places Nearby: you can search for POI (point of interest) around the selected location. GUID-310025-high.tif 5. The selected location is shown on the map. The system transitions to the next screen by selecting Navigate To, or it returns to the previous screen by button. By touching selecting the the location displayed on the screen, you can change the destination to anywhere on the map. Add to Favorites: the selected location can be registered to Favorites. 6. Navigation starts if Start is selected, or after ten seconds of no user interaction. By touching the location displayed on the screen, you can verify the route. Additionally, the route can be revised by selecting other options. GUID-310025-high.tif GUID-310008-high.tif 4. After entering the text, select the check mark to open the list of results: FIAT Connect 7.0 3. Using the keyboard, start entering the text to search for. This text can be a type of Place (like “Hotel”), a type of goods you are looking for (like “Pizza” or “Vacuum cleaner”) or even a street name followed by the town. (Optional) The local search is carried out around your current location. To search around a different location, enter the name of the town after the word you are looking for. You can enter up to 25 characters. GUID-310007-high.tif 81 Selecting A Map Location As The Destination 1. Touch anywhere on the map. 4. The selected location is shown on the map. The system transitions to the next screen by selecting Navigate To, or it returns to the previous screen by button. By touching selecting the the location displayed on the screen, you can change the destination to anywhere on the map. FIAT Connect 7.0 GUID-310008-high.tif Selecting The Destination From Your Favorites GUID-310027-high.tif 2. Drag the cursor and release it at the desired point. GUID-310007-high.tif Note: Places Nearby: you can search for POI (point of interest) around the selected location. GUID-310028-high.tif 3. Select 82 1. Select after selecting on the MAP screen. 2. In the Navigation menu, select Favorites. When Favorites is selected, the screen transfers to the Favorites screen. Select your registered favorite. . Add to Favorites: the selected location can be registered to Favorites. 5. Navigation starts if Start is selected, or after ten seconds of no user interaction. By touching the location displayed on the screen, you can verify the route. Additionally, the route can be revised by selecting other options. GUID-310029-high.tif 3. The selected location is shown on the map. The system transitions to the next screen by selecting Navigate To, or it returns to the previous screen by selecting the button. By touching the location displayed on the screen, you can change the destination to anywhere on the map. 3. Input the map coordinates value of Latitude and Longitude. Entering The Coordinates Of The Destination GUID-310007-high.tif You can also select a destination by entering its coordinates as follows: 1. Select after selecting on the MAP screen. 2. In the Navigation menu, select Coordinate. GUID-310032-high.tif 4. When finished, select . Note: Places Nearby: you can search for POI (point of interest) around the selected location. Add to Favorites: the selected location can be registered to Favorites. 4. Navigation starts if “Start” is selected, or after ten seconds of no user interaction. By touching the location displayed on the screen, you can verify the route. Additionally, the route can be revised by selecting other options. FIAT Connect 7.0 GUID-310008-high.tif GUID-310032A-high.tif GUID-310029B-high.tif 83 Note: Places Nearby: you can search for POI (point of interest) around the selected location. FIAT Connect 7.0 GUID-310032B-high.tif 5. Select “Select”. 6. The selected location is shown on the map. The system transitions to the next screen by selecting Navigate To, or it returns to the previous screen by button. By touching selecting the the location displayed on the screen, you can change the destination to anywhere on the map. Add to Favorites: the selected location can be registered to Favorites. 7. Navigation starts if Start is selected, or after ten seconds of no user interaction. By touching the location displayed on the screen, you can verify the route. Additionally, the route can be revised by selecting other options. 2. The following pieces of information are displayed: The name and/or address of the destination. The total time of the route. The total length of the route. The route planning method (e.g. Fast). GUID-310008-high.tif Check Route Parameters And Accessing Route Related Functions GUID-310007-high.tif 84 You can check different parameters of the route recommended by the navigation system. 1. Select after selecting on the MAP screen. IL006 Selecting a new destination when already having a route: New Route, Waypoint or Final Destination Select Edit Route to edit the route. If you already have a recommended route and you select a new destination as described in the above sections, the application will ask you whether to start a new route, add a new waypoint (intermediate destination) to the route or append the newly selected destination at the end of the current route. Select to display the entire route on the map. Note: the new waypoint is placed among destinations to keep the route optimal. To decide where a waypoint to appear, use the Edit Route feature. Select Final Destination to append the newly selected destination at the end of the route. The other destinations of the route remain intact. The previous final destination is now the last waypoint. Editing the list of destinations (Edit Route) You can edit the route by modifying the list of destinations. 1. Select after selecting on the MAP screen. 2. Select Edit Route. GUID-OVERVIEW-high.tif Select Avoid to bypass a part of the route. Select Cancel Route to delete the active route. GUID-330001-high.tif Note: There are other convenient functions. Modifying The Route When navigation is already started, there are several ways to modify the active route. The following sections show some of those options. Select New Route to plan a new route to the newly selected location. The previous destination and waypoint(s) are deleted. Select Waypoint to add the newly selected location as an intermediate destination to your route. The other destinations of the route remain intact. FIAT Connect 7.0 3. You have the following options on this screen (for detailed instructions on how to use them, see the next chapter): GUID-330002-high.tif 85 3. Edit the destination or waypoint. +: add the new destination or waypoint. : start the route plan in consideration of the selected destination or waypoint. 4. Select the destination or waypoint to display the menu. FIAT Connect 7.0 : close the menu. : delete the selected destination or waypoint from the list. You can select from different route alternatives or change the route planning method after you have selected a new destination. 1. Select after selecting on the MAP screen. 2. Select Route Alternative. GUID-310033A-high.tif 4. Details of a route can be checked by selecting Browse Map. : move the selected destination or waypoint forward one by one. : move the selected destination or waypoint rearward one by one. GUID-330005-high.tif 3. The four route alternatives are displayed next to the selected route planning method. Select one to view it on the map. GUID-330003-high.tif 86 Checking Route Alternatives When Planning The Route GUID-330007-high.tif 5. Select one of the route alternatives or select to return to the previous screen. The navigation system recalculates the route. The orange line now shows the new recommended route. To recalculate the active route with different road type preferences, do as follows. These changes can also be made in Settings. 1. Select after selecting on the MAP screen. 2. Select Route Settings. Charge roads are pay roads where you can purchase a pass or vignette to use the road for a longer period of time. They can be enabled or disabled separately from toll roads. The navigation system includes toll roads (pay roads where there is a peruse charge) in the routes by default. If you disable toll roads, the navigation system plans the best toll-free route. The navigation system includes ferries in a planned route by default. However, a map does not necessarily contain information about the accessibility of temporary ferries. You might also need to pay a fare on ferries. GUID-330008A-high.tif 3. Select any of the listed road types to modify the route. If needed, scroll the list for all road types. You have the following options (their order depends on the selected vehicle type): You might need to avoid expressway if you are towing another vehicle. Setting in which routes with carpool lanes can be created or not created. The navigation system excludes unpaved roads by default: unpaved roads can be in a bad condition and usually you cannot reach the speed limit on them. 4. The route has already been to return to the recalculated. Select Map screen. Note: Some functions are not available depending on some countries and regions. Saving A Location As A Favorite Destination You can add any location to Favorites, the list of frequently used destinations. Planning a route to one of the Favorite destinations is described on “Selecting the destination from your Favorites”. 1. Select a destination as described before. It can be an address, a Place, any location on the map, a previously used destination from History, etc. 2. A searched destination can be registered to Favorites by selecting Add to favorites on the verification screen of the destination search results. FIAT Connect 7.0 Changing The Road Types Used In Route Planning A border crossing may be a shorter route depending on the route. For this function, you can select whether or not to cross a border when planning the route. GUID-340001-high.tif 87 FIAT Connect 7.0 Editing The Details Of A Favorite Destination Delete: delete the registered Favorites. You can select a location that you have already saved as a Favorite and edit its details. 1. Press the Favorites button on the multimedia control knob. 2. Select the Navigation tab. 3. The list of Favorite destinations is displayed. Your home address can be registered/changed by selecting Home. Replace with Current Location: set the current location to Favorites. Replace with Current Destination: register the current destination to Favorites. Replace with Address from Contacts: register an address registered to the contacts list. Move: switch the Favorites order. Rename: edit the registered Favorites name. Delete: delete the selected Favorites. GUID-340002-high.tif The following functions can be used by selecting Add/Edit Navigation Favorites. Reference Guide Add Current Location: set the current location to Favorites. Smart Zoom provides much more than just a usual automatic zoom feature: Add Current Destination: register the current destination to Favorites. While following a route: when approaching a turn, it will zoom in and raise the view angle to let you easily recognize your maneuver at the next junction. If the next turn is at a distance, Add from Contact: register an address registered to the contacts list. Move: switch the Favorites order. 88 The following functions can be used by selecting the registered Favorites: Smart Zone it will zoom out and lower the view angle to be flat so you can see the road in front of you. While driving without an active route: smart Zoom will zoom in if you drive slowly and zoom out when you drive at high speed. Off: turns the Smart Zoom setting off. Route Calculation And Recalculation The navigation system calculates the route based on your preferences: Route planning methods: – Fast: gives a quick route if you can travel at or near the speed limit on all roads. – Short: gives a route that has the smallest total distance of all possible routes. – Economical: this method combines the merits of the Fast and Short routes. The navigation system makes a calculation for the Fast route, but it also includes other roads in the calculation in consideration of fuel economy. – Easy: results in a route with fewer turns and no difficult maneuver. With this option, you can make the navigation system take, for example, the expressway instead of a series of smaller roads or streets. – Period Charge: – Per-use Toll: – Ferries: – Carpool Lanes: – Unpaved Roads: – Border Crossing: Whenever data exists, route calculation takes into account historical traffic data for the given day of week and time of day (see “Historical traffic”). If the setting for Traffic Settings is valid, Real-time Traffic events are taken into account and the route is largely modified. The navigation system automatically recalculates the route if you deviate from the proposed itinerary or if a newly received Traffic event concerns a part of the recommended route. Note: Some functions are not available depending on some countries and regions. Road Safety Cameras And Other Proximity Alert Points (Only Some Countries And Regions) There is a special proximity warning for road safety cameras (like speed or red light cameras) and other proximity alert points (like schools or railroad crossings). The application can warn you when you approach road safety cameras like speed cameras or dangerous areas like school zones or railroad crossings. You can set up the different alert types individually in Warning Settings. The following alert types are available: Audio warning: when approaching one of these points, a beep sound (regular sound) can be used or the type of warning can be announced (TTS), and an extra alert can warn you if you exceed the given speed limit while approaching the point. Always: the type of the alert point, its distance, and the related speed limit appear on the Map screen while you are approaching one of these points. For some of the alert points, the enforced or expected speed limit is available. For these points, the audio alert can be different if you are below or above the given speed limit. Setting can be selected using Warning Settings: Only when speeding: the audio alert is only played when you exceed the given speed limit. When approaching: the audio alert is always played when approaching one of these alert points. To draw your attention, the alert may differ if you exceed the speed limit. Note: The warning for road safety cameras is disabled when you are in a country where road safety camera warnings are prohibited. However, you must ensure on your own liability that using this feature is legal in the country where you intend to use it. Traffic Information In Route Planning — If Equipped The recommended route is not always the same between two points. Offline historical traffic information (historical speed information or traffic patterns) can be taken into account in the route calculation based on the time of day and the day of week whenever suitable data exists. In addition, real-time traffic information can help you avoid current traffic events like temporary road FIAT Connect 7.0 Road type used for route plan: – Motorway: 89 closures or a traffic jam caused by an accident. Both functions are subject to data availability. FIAT Connect 7.0 on the Select Traffic after selecting MAP screen to display the historical traffic information on the map. 90 A 2D map is displayed with road segments colored by the density of the traffic in the given period. The current information is shown when you open the screen. Modify the day of week and the time of day to see the desired period. but in some cases, like on public holidays that fall on normal weekdays, they can be misleading. You can disable this feature in Traffic Settings. on Select Traffic after selecting the MAP screen to display the historical traffic information on the map. Traffic Message Channel (TMC) TMC (Traffic Message Channel) can provide your navigation system with the real-time status of the traffic. Route calculation can avoid road blocks or unexpected traffic jams caused by an accident. Note: This feature is available only if your hardware supports TMC. Note: TMC is not a global service. It may not be available in your country or region. Ask your local dealer for coverage details. GUID-410003-high.tif Historical Traffic The navigation system may contain the TMC receiver that is needed to receive Traffic events. If historical traffic information is available with the map data, the navigation system can use it when planning a route. In normal cases, these statistics help you avoid usual traffic jams on the given day of week in the given hour Ask your local dealer if public Traffic data is broadcast at your location. If so, the navigation system automatically takes into account the traffic events received. You do not need to set anything in the program. The receiver will automatically search for TMC data, and the decoded information will immediately be used in route planning. When the navigation system receives traffic information that may affect your route, the program will warn you that it is recalculating the route, and navigation will continue with a new route that is optimal considering the most up-to-date traffic conditions. To fine-tune this recalculation, you can set the minimum delay that can trigger a route recalculation, or you can instruct the navigation system to have you confirm the new recommended route before it takes effect. You can do these in Traffic Settings. A special icon ( ) is displayed on the Map screen to show you whether traffic events are received. The icon shows the status of the traffic receiver when there are no traffic events on your route, otherwise it shows the type of the next traffic event on your route. Road segments affected by traffic events are displayed with an alternate color on the map, and small symbols above the road show the nature of the event: 1. Select ( ) to open the Traffic Summary screen: 5. Select to avoid or ignore the traffic event. GUID-ICON044-high.tif 3. Select the category. GUID-410303-high.tif Online Traffic Information GUID-410301-high.tif Unlike historical traffic information, online traffic can provide you with the real time status of the traffic. Route calculation can avoid road blocks or unexpected traffic jams caused by an accident. To fine-tune this recalculation, you can set the minimum delay that can trigger a route recalculation, or you can instruct the navigation system to have you confirm the new recommended route before it takes effect. You can do these in Traffic Settings. Road segments affected by traffic events are displayed with an alternate color on the map, and small symbols above the road show the nature of the event: 1. Select after selecting on the MAP screen. 2. Select Traffic. 3. Select the traffic category you are interested in, or select to see the list of all events. Note: This feature needs an active Internet connection. 4. Select the traffic event. GUID-410302-high.tif The application automatically takes into account the traffic events received. You do not need to set anything in the program. When the navigation system receives traffic information that may affect your route, the program will warn you that it is recalculating the route, and navigation will continue with a new route that is optimal considering the most up-to-date traffic conditions. FIAT Connect 7.0 2. Select to see the list of all events: GUID-410301-high.tif 4. Now select any of the list items to see its details, and to display the affected road segment in its full length on the map. 91 Setting Menu You can configure the program settings, and modify the behavior of the after navigation system. Select selecting on the MAP screen. FIAT Connect 7.0 GUID-330008-high.tif Button Descriptions Map Settings You can fine-tune the appearance of the Map screen. Adjust the map view to your needs, show or hide 3D buildings, and manage POI (point of interest) display settings (which POI to show on map). Guidance Settings A guidance-related setting is available during route guidance. Warning Settings A setting related to warnings is available. Route Settings Refer to “Changing The Road Types Used In Route Planning”. Traffic Settings A setting for traffic information is available. Connected Settings A setting for online service is available. Note: Some functions are not available depending on some countries and regions. 92 Guidance Setting Button Descriptions Guidance Vol. The guidance audio volume can be changed during route guidance. Button Descriptions Speeding The following alert types are available: Off: No display and sound Visual Only: Only display Audio and Visual: Both sound and display If the guidance volume is set to 0, the speed limit notification is also 0 because it is part of the guidance Speed Limit The speed limit warning display can be changed. Always: Constantly displayed When Speeding: Displays only when vehicle speed exceeds speed limit Alert Points A setting is available which sounds a beep at alert points, and it can be set to on or off. In addition, detailed settings concerning the warning can be made. Off: No display and sound Visual Only: Only display Audio and Visual: Both sound and display Speed Cameras The speed camera warning setting can be changed. Off: No display and sound Visual Only: Only display Audio and Visual: Both sound and display FIAT Connect 7.0 Warning Settings Note: Some functions are not available depending on some countries and regions. 93 FIAT Connect 7.0 Traffic Settings 94 Button Description Use Historical Traffic Data Use this switch to enable or disable historical traffic data and traffic patterns. This locally stored information can be very useful in normal circumstances but for example on public holidays it may be better to turn off in order not to take into account normal weekday traffic jams. Online Traffic Use this switch to enable or disable receiving real-time traffic information online. The rest of the buttons below are all related to this real-time information and are available only if receiving is enabled. You can also define whether to receive online traffic only when connected to a Wi-Fi network. Offer Detour Alternative routes are offered for detours. Auto Accept Detour An appropriate alternative route is determined and provided by the navigation system in consideration of traffic conditions. Detour Sensitivity You can select how much time delay on the alternative route you are willing to accept. The alternative route is offered based on the set time. Note: Some functions are not available depending on some countries and regions. Button Description Route Calculation Method The route calculation can be optimized for different situations. See below for details. Expressway You might need to avoid expressway if you are towing another vehicle. Period Charge Charge roads are pay roads where you can purchase a pass or vignette to use the road for a longer period of time. They can be enabled or disabled separately from toll roads. Per-use Toll The navigation system includes toll roads (pay roads where there is a per-use charge) in the routes by default. If you disable toll roads, the navigation system plans the best toll-free route. Ferries The navigation system includes ferries in a planned route by default. However, a map does not necessarily contain information about the accessibility of temporary ferries. You might also need to pay a fare on ferries. Carpool Lanes Setting in which routes with carpool lanes can be created or not created. Unpaved Roads The navigation system excludes unpaved roads by default: unpaved roads can be in a bad condition and usually you cannot reach the speed limit on them. Border Crossing A border crossing may be a shorter route depending on the route. For this function, you can select whether or not to cross a border when planning the route. FIAT Connect 7.0 Route Settings Note: Some functions are not available depending on some countries and regions. 95 Map Settings You can fine-tune the appearance of the Map screen, adjust the map view to your needs, show or suppress 3D buildings, and manage Place visibility settings (which Places to show on the map). The map is always shown on the screen so that you can see the effect when you change a setting. Scroll the screen downward to display the setting behind the lower part of the screen. FIAT Connect 7.0 GUID-420002-high.tif 96 Button Descriptions When this button is selected, the map view mode can be changed: 3D: Displays things such as actual construction sites three dimensionally on the map View Mode 2D: The map is rotated so that the direction of travel is displayed in the upward direction 2D N: The map is displayed so that north is up regardless of the direction of travel Viewpoint Adjust the basic zoom and tilt levels to your needs. Three levels are available. Automatic Zoom During route guidance in any map view mode, the function for zooming in on approaching intersections turns on/off automatically. Buildings Show or hide 3D town models, 3D artistic or block representation of all town building data containing actual building sizes and positions on the map. Expressway Overview When enabled, the map zooms out to show an overview of the surrounding area if the next route event (maneuver) is far away. The system goes back to the normal map view when you approach the next event. Button Descriptions Select which Places to show on the map while navigating. Too many Places make the map crowded, so it is a good idea to show as few as possible. You have the following possibilities: Place Markers Select the check box to show or hide the Place category. Visual Guidance Settings Button Description Show Signposts Whenever adequate information is available, lane information similar to the real ones on road signs above the road is displayed at the top of the map. You can turn this feature on or off. Show Junction View If you are approaching a expressway exit or a complex intersection and the needed information exists, the map is replaced with a 3D view of the junction. You can turn this feature on or let the map be displayed for the whole route. Show Tunnel View When entering tunnels, the surface roads and buildings can cause problems visually. This feature shows a generic picture of a tunnel instead of the map. A top down overview of the tunnel and remaining distance are also displayed. FIAT Connect 7.0 Select the name of the Place category to open the list of its subcategories. Connected Settings — If Equipped Button Descriptions Auto Download Weather Set the weather forecast automatic download on/off. Online Traffic Set the traffic information automatic download on/off. 97 GLOSSARY GPS Accuracy North-Up Map Orientation Active Route Several factors have impact on the deviation between your real position and the one given by the GPS device. In North-up mode the map is rotated so its top always faces North. This is the orientation for example in Find on Map. For example, signal delay in the ionosphere or reflecting objects near the GPS device have a different and varying impact on how accurately the GPS device can calculate your position. Road Safety Camera The currently navigated route. Whenever a destination is set, the route is active until you delete it or reach your destination. FIAT Connect 7.0 Town Center The town center is not the geometric center of the town but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is one of the important intersections. Color Scheme The navigation system has different color schemes for daytime and nighttime which can be selected as desired. One daytime scheme and one nighttime scheme is always selected for the map and for the menus. The navigation system uses them when it switches from day to night and back. Map The navigation system works with digital maps which are not simply the computerized versions of traditional paper maps. Similarly to paper road maps, the 2D mode of digital maps show you streets, roads, and elevation by colors. In 3D mode, you can see the altitude differences, for example valleys and mountains, elevated roads, and in selected cities 3D landmarks and 3D buildings are also displayed. You can use digital maps interactively: you can zoom in and out (increase or decrease the scale), you can tilt them up and down, and rotate them left and right. In GPS-supported navigation, digital maps facilitate route planning. 98 This function is not available in some countries and regions. Special alert points for speed, red light or bus lane cameras. Different data sources are available. You can configure the navigation system to warn you when you approach one of these cameras. Detecting the location of Road Safety Cameras is prohibited in certain countries. It is the sole responsibility of the driver to check whether this feature can be used during the trip. The software is capable of showing and warning for more than just cameras. Various other types of proximity alert points like school zones and railway crossings are also available. END-USER TERMS A sequence of maneuver (for example, turns and roundabouts) to reach the destination. The route contains one starting point and one or more destinations. The data is provided for your personal, internal use only and not for resale. It is protected by copyright, and is subject to the following terms and conditions which are agreed to by you, on the one hand, and VISTEON and its licensors (including their licensors and suppliers) on the other hand. Track-Up Map Orientation In Track-up mode the map is rotated so its top always points in the current driving direction. This is the default orientation in 3D map view mode. Vehicle Marker The current position is indicated by a blue arrow on the map. The direction the blue arrow is pointed indicates the current heading. © 2017 HERE. All rights reserved. The Data for areas of Canada includes information taken with permission from Canadian authorities, including: © Her Majesty the Queen in Right of Canada, © Queen’s Printer for Ontario, © Canada Post Corporation, GeoBase®, © Department of Natural Resources Canada. HERE holds a non-exclusive license from the United States Postal Service® to publish and sell ZIP+4® information. © United States Postal Service® 2013. Prices are not established, controlled or approved by the United States Postal Service®. The following trademarks and registrations are owned by the USPS: United States Postal Service, USPS, and ZIP+4. The Data for Mexico includes certain data from Instituto Nacional de Estadística y Geografía. Terms and Conditions Personal Use Only: You agree to use this Data together with VISTEON’s CMU for the solely personal, noncommercial purposes for which you were licensed, and not for service bureau, time-sharing or other similar purposes. Accordingly, but subject to the restrictions set forth in the following paragraphs, you agree not to otherwise reproduce, copy, modify, decompile, disassemble, create any derivative works of, or reverse engineer any portion of this Data, and may not transfer or distribute it in any form, for any purpose, except to the extent permitted by mandatory laws. Restrictions Except where you have been specifically licensed to do so by VISTEON, and without limiting the preceding paragraph, you may not (a) use this Data with any products, systems, or applications installed or otherwise connected to or in communication with vehicles, capable of vehicle navigation, positioning, dispatch, real time route guidance, fleet FIAT Connect 7.0 Route 99 FIAT Connect 7.0 management or similar applications; or (b) with or in communication with any positioning devices or any mobile or wireless-connected electronic or computer devices, including without limitation cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or PDAs. 100 Note: The Data may contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic data, any of which may lead to incorrect results. No Warranty: This Data is provided to you “as is,” and you agree to use it at your own risk. VISTEON and its licensors (and their licensors and suppliers) make no guarantees, representations or warranties of any kind, express or implied, arising by law or otherwise, including but not limited to, content, quality, accuracy, completeness, effectiveness, reliability, fitness for a particular purpose, usefulness, use or results to be obtained from this Data, or that the Data or server will be uninterrupted or error-free. Disclaimer of Warranty: VISTEON AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE, MERCHANTABILITY, And FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. Some States, Territories and Countries do not allow certain warranty exclusions, so to that extent the above exclusion may not apply to you. Disclaimer of Liability: VISTEON AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT, WHICH MAY RESULT FROM THE USE OR POSSESSION OF THE INFORMATION; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE INFORMATION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF VISTEON OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some States, Territories and Countries do not allow certain liability exclusions or damages limitations, so to that extent the above may not apply to you. Export Control: VISTEON shall not export from anywhere any part of the Data or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export laws, rules and regulations, including but not limited to the laws, rules and regulations administered by the Office of Foreign Assets Control of the U.S. Department of Commerce and the Bureau of Industry and Security of the U.S. Department of Commerce. To the extent that any such export laws, rules or regulations prohibit HERE from complying with any of its obligations hereunder to deliver or distribute Data, Entire Agreement: These terms and conditions constitute the entire agreement between VISTEON (and its licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof, and supersedes in their entirety any and all written or oral agreements previously existing between us with respect to such subject matter. Governing Law: The above terms and conditions shall be governed by the laws of the State of Illinois [“Netherlands” where European HERE Data is used], without giving effect to (i) its conflict of law’s provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the jurisdiction of the State of Illinois [“The Netherlands” where European HERE Data is used] for any and all disputes, claims and actions arising from or in connection with the Data provided to you hereunder. Government End Users: If the Data is being acquired by or on behalf of the United States government or any other entity seeking or applying rights similar to those customarily claimed by the United States government, this Data is a “commercial item” as that term is defined at 48 C.F.R. (“FAR”) 2.101, is licensed in accordance with these End-User Terms, and each copy of Data delivered or otherwise furnished shall be marked and embedded as appropriate with the following “Notice of Use,” and shall be treated in accordance with such Notice: NOTICE OF USE CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: HERE CONTRACTOR (MANUFACTURER/ SUPPLIER) ADDRESS: 425 West Randolph Street, Chicago, Illinois 60606 © 2017 HERE – All rights reserved. If the Contracting Officer, federal government agency, or any federal official refuses to use the legend provided herein, the Contracting Officer, federal government agency, or any federal official must notify HERE prior to seeking additional or alternative rights in the Data. FIAT Connect 7.0 such failure shall be excused and shall not constitute a breach of this Agreement. This Data is a commercial item as defined in FAR 2.101 and is subject to these End-User Terms under which this Data was provided. 101 F 18C7-526-AB FIAT® 124 SPIDER Second Edition Radio Book DID_3049359_18b_Fiat_124_Spider_Connect_7_Radio_Book_EN_011818.indd 1 © 2018 FCA US LLC. All Rights Reserved. FIAT is a registered trademark of FCA Group Marketing S.p.A., used under license by FCA US LLC. I A T 7 1 . 0 2 4 C O S N P N I E C D E R T 1/18/18 12:41 PM
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project